Antique Chairs Before 1840
Easy chairs before 1840
As the Baroque movement swept through Europe during the late 17th century, the design of seat furniture became increasingly luxurious, elaborate, and more importantly comfortable. Caned and leather chairs, which until this time had sufficed, were largely abandoned in favour of richly upholstered easy chairs as stiff upright backs were discarded and were replaced by sloped and subsequently shaped backs. The number of types of chairs also increased enourmously.
ITALY AND FRANCE
It was in Italy, particularly in Venice, Florence, and Rome, during the late 17th and early 18th centuries, that the Baroque style found its clearest expression. The most elaborate open armchairs of this period are usually of either boxwood or giltwood. They are carved with scrolling acanthus, espagnolette masks, and even mythological figures emblematic of the four seasons. Some Venetian examples feature seahorses in deference to the city’s seafaring tradition. Such pieces were usually the work of trained sculptors who had turned their hand to furniture-making; the most celebrated of these was undoubtedly Andreas Brustolon (1662-1732).
In France, under the influence of Cardinal Mazarin, the court of Louis XIV (1643-1715) became increasingly hungry for foreign luxuries and fashions, especially those from Italy. In the mid-17th century French easy chairs became increasingly comfortable and elaborate, owing to their generous proportions, richly turned decoration, and lavish use of velvet upholstery from Genoa or Utrecht.
The Regence period (1715-23) saw significant developments in the design of seat furniture. Although the menuisiers (joiners) were slow to abandon the traditional Louis XIV fauteuil (armchair) form, they were increasingly lavish in their carving. Chairs were decorated with gadroons, shells, and rosettes, and even richly upholstered in velvet or lavish textiles made at the Savonnerie in Paris (est. 1604 in the Louvre for the production of textiles; from 1627 at the Savonnerie). The stretcher became more sinuous, and was abandoned by the 1720s. Further changes in form and design were
dictated by the fashion for wearing hooped dresses, introduced c.1720, which resulted in the arms of easy chairs being set back by a quarter of the length of the side-rail. The introduction of upholstery it allowed the loose covering to be changed according to the season.
Under Louis XV (1715-74) the fashion
for placing chairs around the sides of the room was abandoned in favour of a more relaxed arrangement that encouraged intimate conversation and gave birth to the fauteuil en cabriolet, with its Rococo form and exuberant carving in the round. Louis XV seat furniture is usually made of either walnut or beech, the latter wood
always either gilded or painted; a
pegged construction was used, and pieces are very often stamped by the menuisier responsible, in accordance with the strict rules of the furniture-
makers’ guild (Corporation des Menuisiers-Ebenistes). During the 1730s numerous styles of informal easy chair emerged, all of them richly carved. The most luxurious was the bergere, which was popular throughout the 18th century and characterized by its deep seat, padded back and sides, and squab cushion. Widely copied throughout Europe, it was to prove inspirational to chair-makers during the Regency period (c.1790-1830) in Britain, and was also much copied in the late 19th and
20th centuries.
BRITAIN AND NORTH AMERICA
The earliest-recorded wing armchairs, known as bergere en confessionnal because the identity of the sitter was hidden by the side wings, are French examples from the early 1670s. Invariably of walnut, this form was rapidly adopted in Britain. The wing armchairs made during the late 17th and very early 18th centuries were usually of walnut or, in more provincial examples, of beech stained to simulate walnut. These armchairs are characterized by the exaggerated scroll of the arms, the high, slanted back flanked by high wings, and the stylized carving of scrolls and foliage on the legs and stretchers.
The most celebrated form of wing armchair was made from the early 18th century until c.1750. Examples are usually of walnut, and are
supported on cabriole legs, which, unlike their 17th-century prototypes, are rarely joined by stretchers. Wing armchairs made in Britain during the reigns of Queen Anne and George I are often carved with trailed husks and scallop shells on the top of the knees and stand on pad feet, although some later examples have hoof or claw-and-ball feet. The most refined wing armchairs of this period were upholstered in gros and petit point needlework, often with figures on the back (but never on the seat) within a flower-strewn border.
Wing armchairs continued to be made throughout the 18th century in mahogany, and were widely copied in walnut in the 19th and 20th centuries. North American early 18th-century wing chairs were generally of walnut or maple, with a high arched crest, and block and vase turned legs joined by a stretcher. During the 1720s short cabriole legs with “Spanish” feet, were used and front stretchers were eliminated. From the mid-18th century mahogany was used. Stretchers continued to be used in New England, while easy chairs made in Philadelphia generally did not have them. In 1760 the serpentine crest design was introduced, modifying the verticality, and it was used along with the rounded profile until the 1780s. Between 1780 and 1800 American chair-makers used George Hepplewhite’s design for a “Saddle Check Chair”, an easy chair with serpentine contoured wings, straight legs, and “H” stretchers, a chair design also associated with Thomas Chippendale (1718-79). There are regional differences in construction and upholstery. Maple was often used for the one-piece rear legs and stiles in New England chairs, stained to match the mahogany of the front legs.
A Library bergere or “Uxbridge” chair
This British armchair is of a style introduced in the early I8th century for use in the library. It has a cane-filled back and sides, and leather-covered cushions, the best examples have reeled or fluted front legs (early 19th century; ht 1.2ml3ft 1 lin; value 1)
Other types of late 18th-century easy chair were based on designs in The Cabinet-Maker and Upholsterer’s Drawing Book (1791-1802) by Thomas Sheraton (1751-1806) including “conversation” chairs, with deep upholstered seats and padded toprails on which the sitter, facing backward, could rest his or her arms. In Sheraton’s The Cabinet Dictionary (1803) there is a reference to a “curricle” chair, so-called after a tub-shaped carriage, which was popular in libraries at the time. About 1810 to 1820 bergere-type armchairs with deep, upholstered or leather seats and backs, and cane or upholstered sides, were also widely used in libraries.
SCANDINAVIA
Trade between England and Scandinavia was well established by the mid-17th century, and some English furniture had been exported to Scandinavia by the end of the century. Craftsmen in these countries produced good copies of English furniture; the joiners (although not the cabinet-makers) were very conservative, with the result that early 18th-century styles continued to be produced until c.1800. Around this time, too, mahogany was introduced; before this, walnut was used for expensive pieces. More commonly employed, however, were native light-coloured woods such as birch, ash, and pine; these were left bare, stained, or painted in colours.
By the late 1730s French designs had become increasingly popular at the Swedish and Danish courts and also with the upper classes in these countries; the middle classes did not generally adopt the new fashions until the end of the century. French styles were particularly influential in Sweden, and from the Rococo period court architects were trained in Paris. One of the most influential Swedish designers of the period was Jean Eric Rehn (1717-93). Danish court architects learned their trade in Germany, but this situation changed after the reign of Louis XVI, when both countries adopted the French Neo-
classical style. In Sweden the cabinetmaker Georg Haupt (1741-84), who had trained in both Paris and London is well known for his work in the Louis XVI style. This style developed into the Neo-classical Gustavian style during the I 770S.
AMERICAN “CHIPPENDALE”
The carvers of the most elaborate American Rococo furniture were immigrants from England, Scotland, and Ireland, who had served their apprenticeship in London before going to North America. The first of them arrived in the 1740s, but the great wave of craftsmen tsmen was in the 1760s. Philadelphia was the city most hospitable to immigrants, and more Rococo furniture was produced there than in other colonies. The major cities in America developed distinctive furniture styles, due to the taste of the gentry, the mix of native born and immigrant craftsmen, and the availability of imported
furniture and English pattern books. It is known that there were copies of Chippendale’s Director in Philadelphia. The Library Company of Philadelphia acquired a copy between 1764 and 1769, and two cabinet-makers Thomas Affleck (1740-95) and Benjamin Randolph, owned copies. In America furniture was mostly made of solid pieces of primary wood, rather than veneers over a seconday wood carcase as in England.
RUSSIA
Throughout the 18th century Russian furniture was inspired by French and to a lesser degree English designs; by c.1815 German influence is also apparent. Generally the timbers used for Russian furniture were indigenous; during the early 18th century, when designs were dictated by early Georgian furniture from Britain, they included oak, beech, and walnut. By the 1720s Russian armchairs had tall curved backs with a vase splat and cabriole legs. By the mid-18th century, the taste for Rococo and Chinese ornament had spread to Russia due to the publication of such influential pattern-books as The Gentleman and Cabinet-Maker’s Director (1754-62) by the English cabinet-maker Thomas Chippendale (1718-79). English-style chairs with pierced splats and sweeping cabriole legs with claw-and-ball feet, usually made in mahogany, were increasingly popular.
However, from the beginning of the 19th century the clearest influence on Russian furniture manufacture was that of France. Particularly favoured was the Empire style of the cabinet-maker Georges Jacob (1739-1814), who was based in Paris. About this time, light-coloured woods also became popular, anticipating the Biedermeier style in Germany and Scandinavia. From c.1815 chairs were executed in indigenous woods such as Karelian birch, maple, and poplar, decorated with restrained stringing.
HALL CHAIRS
Hall chairs (and also hall benches) were introduced in Britain from the late 17th century. They may have been inspired by similar chairs known as sgabelli, which were popular in the great Italian palaces during the 16th century. Hall chairs were designed to be placed in the entrance hall or passageways used by servants and tradesmen waiting to be called into one of the main rooms. Consequently such chairs were never upholstered, and generally they lacked arms; however, they were increasingly made of mahogany, with solid backs and dished or shaped scats. The designs were bold and simple and were frequently embellished with the painted crest or coat of arms of the family who commissioned them. In some cases they were carved with motifs intended to impress guests and to emphasize the social status of the owner. The importance given to hall chairs is suggested by the fact that there are six designs for such chairs in The Gentleman and Cabinet-Maker’s Director by Thomas Chippendale, three in The Cabinet-Maker and Upholsterer’s Guide (1788-94) by George Hepplewhite (d.1786), and two in The Cabinet Dictionary (1803) by Thomas Sheraton (1751-1806).
THE BIEDERMEIER STYLE
This decorative style was popular in Germany, Austria, and Scandinavia between c.1815 and c.1848. The name was invented by two German poets who wrote under the pseudonym Gottlieb Biedermeier, formed from a combination of bieder (meaning conventional or honest) and Meier, a common German surname. The solid, comfortable appearance of Biedermeier pieces was thought to mirror the unpretentious elegance of the German bourgeoisie. The simple, geometic designs, which eschewed ornate decoration, were inspired by French furniture of the Empire period. Function and comfort were of supreme importance to the Biedermeier craftsmen and to achieve this end they used coil-spring upholstery.
• UPHOLSTERY gros and petit point arc very rare and greatly contribute to the value of a wing armchair
• REGILDING well-executed regilding should not dramatically affect the value of an object; French Louis XV beechwood chairs were usually originally gilded or painted and traces are often found in the crevices
• HALL CHAIRS these arc usually found in sets of four or more, although it is possible to find single chairs; they are often decorated on the back with a cartouche featuring the armorial of the family who commissioned them; they are generally very good value for money
• COPIES AND FAKES Brustolon-style chairs were widely copied in the 19th century; Biedermeier chairs have been been widely faked in the 20th century, with many side chairs converted into armchairs – this should be obvious if the proportions seem wrong