Antique Bracket Clocks
Bracket Clocks
The backplate continued to be engraved, usually with such fashionable motifs as foliate scrolls and flowering urns.
In France curvaceous, asymmetrical forms were Popular from the 1690s, typified by the waisted bracket clock with its inward-curving case and matching wall bracket. Extravagant inlay with exotic materials was typical until c.1750, as were tortoiseshell veneer and gilt mounts; ormolu, lacquer, and porcelain were all popular, with ornate asymmetrical scrolls, shells, and flowers. From c.7750 to c.1800 more restrained lines and rustic, sentimental, and Classical motifs prevailed. Dials on most early 18th-century examples have an enamelled centre, with enamel plaques for numerals this is called a 13-piece dial; from the mid-18th century clockmakers used a one-piece, white, enamelled dial.
Early bracket clocks
The invention of the pendulum in the mid-17th century Trade possible the production of spring-driven clocks with a short pendulum, designed to stand on furniture, shelves, or wall brackets. These clocks, often portable, are usually known in Britain as “bracket” clocks, although few few were actually made with matching brackets; they are also known as “mantel” or “table” clocks. The cases and dials of early 17th
and 18th-century examples largely follow those of contemporary longcases.THE 17TH CENTURY
The earliest bracket clocks, made from the 1660s mostly in England, have cases veneered with ebony, walnut, or olivewood, a pediment-shaped or domed top, a brass carrying handle, bun or block feet, and pierced wooden panels or frets at the sides and/or the front, which were backed with fabric so that the striking mechanism could be heard. Damaged delicate wooden frets were often later replaced by glass panes. Some examples have gilded or silver feet, pierced (known as “basket”) brass tops and frets, and tortoiseshell veneer. The square brass dials often feature an applied, silvered chapter ring, spandrels in the form of winged cherubs, and blued-steel hands. Most 17th-century (and 18th-century) bracket clocks are of eight-day duration, strike the hours, and have a verge escapement; some were converted to the more accurate anchor escapement in the 19th century. Backplates were often engraved with Dutch-inspired tulips and leaves.
French 17th-century bracket clocks are usually more ornate than their English counterparts. One of the earliest forms was the pendule religieuse or Louis XIII clock, with tortoiseshell inlaid with silver and brass, gilt finials, and often gilt acanthus leaf swags or scroll mounts. From the 1690s French examples featured white enamel plaques for each numeral on the dial, on a velvet ground. Dutch clocks also featured velvet-covered dial plates, but their cases — typically in ebony — are plainer.
THE 18TH CENTURY
Bracket cases were usually veneered with walnut or ebonized until c.1730, and veneered with mahogany thereafter. Arched brass dials were introduced c.1715, with calendar work or strike/silent dials in the arch,
and an applied, silvered chapter ring. Some 18th-century examples have quarter-hour as well as hour striking and often a repeat mechanism, operated by a cord.
• CASE designs are similar to contemporary furniture and longcase clocks; British clocks tend to have wooden cases; French cases use a variety of materials
• MOVENIENT early bracket clocks have verge escapements: these were sometimes converted to anchor escapements an d if so the apron over the pendulum rod may be missing or the pendulum bob
will be disc-shaped instead of conical; some clocks were reconverted back to verge, often with a new apron in a style different from the rest of the clock
• ALTERATIONS finials and feet arc often missing or replaced in a different style; delicate wooden frets may have been replaced by glass
• COLLECTING clocks with a matching bracket are fairly rare and so especially collectable; original escapements are desirable; early clocks are highly sought after
Later bracket clocks
Although the longcase clock went into decline in the early 19th century, the bracket clock remained popular. The majority of 19th-century European bracket clocks are typified by elaborate case design in a variety of styles. The clock industry expanded in the USA, and from the 1840s mass-produced, inexpensive American bracket clocks, or “shelf” clocks, were imported into Europe, contributing to increased competition but ultimately to a decline in the European industry, especially in Britain.
REGENCY BRACKET CLOCKS
From the 1790s to the 1820s British bracket clocks were produced in diverse styles, from the satinwood-veneered “balloon” case, similar to the French waisted style, to the chamfer-top case. The chamfer-top style has a flattened pediment top, influenced by the contemporary Greek Revival style in architecture, and is crowned by a cast and gilt finial. Cases were usually veneered in mahogany or rosewood or ebonized, often with brass strip inlay in delicate scrolling designs. From the end of the 18th century bracket clocks were usually kept in one position rather than transported around: for this reason they often no longer had carrying handles at the top, although most chamfer-top clocks have ornamental brass ring handles on the sides, often held by lion masks.
The large, round, convex dials are among the easiest of faces to read: made of silvered brass, painted iron, or white-enamelled copper, they are usually very plain except for the maker’s signature. The simple brass or blued-steel hands are typically pierced or feature ornamental spade or heart tips. The movement is spring-driven with an anchor escapement.
VICTORIAN BRACKET CLOCKS
By the mid-19th century novelty of case design was all-important. The numerous revival styles, especially the Gothic Revival, were particularly influential. Gothic Revival clocks, popular between the 1830s and 1850s, have the same basic form as Regency clocks, but the dial plate is in the shape of a pointed arch, the fretted side panels imitate Gothic tracery, and cluster columns, copied from medieval architecture, ornament the corners. In contrast to the simpler Regency forms Victorian clocks tended to be elaborately decorated with heavy carving and mounts. Some featured complex striking mechanisms, with chimes on bells, and gongs on the quarter hour. Substantial three-train chiming “director’s” or “boardroom” clocks arc typical of the high Victorian period.
Dials were made in a wide range of materials, including plain or silvered brass and painted iron; the use of Arabic numerals was common from c.1870.
It is unusual to find a Regency bracket clock with its original
matching bracket. Many chamfer-top clocks of this type were made in mahogany or rosewood, but this example has an ebonized wood case. Brass strip inlay, bun feet, pineapple finials, and large, round, white-painted dials are typical of early 19th-century British bracket clocks. (c. 1820, ht excluding bracket 4Bcmll9in; value H)
of the retailer, although the best makers also sold their own clocks. The British clockmaking industry gradually declined from the 1840s owing to growing imports of mass-produced American and German clocks, but fine bracket clocks were made in Britain until World War I.
AMERICAN SHELF CLOCKS
Large-scale production of clocks first began in the early 19th century. Although many were exported to Europe, most surviving examples are found in the USA, where they are popular with collectors. Connecticut-based Eli Terry ( 1772-18-52) was the first to produce inexpensive movements, mostly of wood, using slick production methods and standard parts. In the 1830s Chauncey Jerome (1793-1868) invented 30-hour duration movements from rolled brass, which were both easier to make and more reliable than wood.
Although less expensive materials were used for American cases than European ones, designs were just as varied. Most carcasses were softwood veneered with mahogany, with a maker’s label on the interior, and thin, sheet-metal or wooden dials painted white. Clocks were simply designed to meet functional domestic demands, and used little brass so as to keep costs down. Notable designs were the “pillar and scroll” clock (until c.1830), with elegant side pillars, a scrolled pediment with finials, and simple, scalloped feet and skirt; the “three deck” design, with the case divided into three and decorated with half columns at the sides; the “acorn” style, with a wide, curving trunk; and the “steeple” clock, with a pointed gable and pinnacled side pillars. Most clocks are embellished on the front door with verre eglomise (reverse-painted glass) panels. At the end of the 19th century many American makers copied French marble mantel clocks, using imitation marble of enamelled iron or painted wood; some cases were of papier-mache inset with mother-of-pearl and painted with floral designs.
Regency bracket clocks
• HANDLES many examples have brass side handles, commonly with lion mask or cornucopia mounts
• CASES a variety of styles was produced but most were made of mahogany or rosewood with ball or bracket feet; the best examples have brass strip inlay in scrolling or floral designs
• DIALS most arc round and convex, and of silvered brass, white-painted iron, or enamelled copper; hands, plain or pierced, arc of simple, elegant design
Victorian bracket clocks
• CASES designs are varied, since originality of case was sometimes considered more important than the movement or any mechanical refinements; cases for chiming clocks were elaborate and heavily carved
• DIALS Arabic numerals were popular from c.1870; any name is often that of the retailer rather than the maker
American shelf clocks
• CASES most are softwood, veneered with mahogany; styles are varied but the majority of cases arc decorated on the front with verre eglomise panels
• DIALS these are usually of wood or metal, painted white; dials were not usually signed – instead a label with the maker’s name was usually pasted to the case
• MOVEMENTS early clocks have wooden movements with steel pivots; thin rolled brass was used from 1830s
FRENCH BRACKET AND MANTEL CLOCKS
The late 18th to early 19th century was a great period for French clockmaking, and a tremendous range of clocks was produced, some of them highly sophisticated. The work of the casemaker was as important as – and sometimes more important than – the complexity of the movement: cases are typically made of marble or bronze, embellished with rich gilt-bronze (ormolu) mounts, and generally more ornate than those on British examples. Most such clocks were made in Paris and reflect the influence of the Neo-classical style; ornamental motifs include Classical urns, vases, palmettos, festoons, and swags. One notable design – intended to illustrate the technical sophistication of the clock – is the lyre clock, which features a central gridiron pendulum with metal rods like the strings of a lyre. The multiple rods that form the gridiron pendulum expand and contract at different rates and in varying directions with changes in temperature, ensuring that the length of the pendulum remains constant and the clock highly accurate.
Most late 18th-century French mantel clocks feature round, convex dials, usually enamelled in white with black numerals. A few rare and highly collectable clocks produced in the 1790s have Revolutionary dials: in 1793 the Revolutionary government decreed that clocks and watches should show decimal time, with ten hours in a day and one hundred minutes for each hour. This system was, however, very short-lived.
Classical influences continued into the Empire period, but case designs became ever more ornamental and elaborate. Some were miniature replicas of the furnishings of the period, with figures in Grecian dress stated at tables or with musical instruments.
As industrial production was encouraged by the French government, mechanisms were increasingly standardized – most were fitted with an anchor escapement.
A huge variety of clocks was made in the mid- to late 19th century. A distinctive French design of the second half of the 19th century was the mass-produced, black marble mantel clock, assembled from pre-shaped marble or marble-faced cement. Polished black slate was often used for facings to reduce costs. Only the better-quality pieces, embellished with bronze relief decoration or such mechanical refinements as a perpetual calendar or moon phase dials, are of interest to collectors today. Other designs included the four-glass clock (from c.1850), featuring four panes of glass, and 18th-century revival styles, most of which were produced in gilt metal in the later 19th century. Most 19th-century examples arc of eight-day duration. After c.1870 many cheaper versions of ormolu clocks were made of inferior gilt speller.
• CASES most have ornate cases made of bronze or marble, decorated with rich ormolu mounts; mass-produced marble- or black-slate-faced mantel clocks were common from the late 19th century and are generally inexpensive
• DIALS most arc round and convex, with ormolu surrounds; gilt-metal hands were used c.1800;
later examples have blued-steel hands
• COLLECTING some clocks were produced with matching pairs of candelabra or vases, designed to stand either side of the clock on the mantelpiece; a complete set is desirable and enhances value