Posts Tagged ‘1790s’

Paris became an important centre of porcelain production from the 1780s. Several factors led to the vast increase in the number of porcelain factories: the discovery of kaolin in the Limoges area in 1768, which enabled the production of hard paste; sponsorship by members of the French royal and later imperial families; and the relaxation of laws protecting the monopoly of the Sevres factory. The heyday of the Paris factories was from the 1790s to the 1820s, during which period at least 15 factories and large workshops were operating.
THE DIHL FACTORY
Christophe Dihl ( 1753-1830) and Antoine Guerhard (5.1793) founded a factory on the rue de Bondi in 1781 under the protection of the Duke of Angouleme. The factory’s wares of the 1780s are decorated with cornflowers (known as the “Angouleme sprig”), geometric motifs, and landscapes. The factory’s finest period was the early 19th century, when the popularity and quality of its wares rivalled Sevres. During this period the factory specialized in decoration imitating hardstones. Dihl carried out research into ground colours, producing “jaspered” effects simulating agate and tortoiseshell, usually in combination with fine gilt borders and sometimes reserved scenes. The factory also made biscuit figures of children and allegorical subjects in the Rococo and later Neo-classical tastes; these were sometimes mounted on plinths decorated in matt blue and gilt in imitation of lapis lazuli. Following financial problems during the 1820s, the factory closed in 1828.
THE NAST FACTORY
One of the most successful of all Paris factories, the Nast factory was founded in 1783 by the Austrian Nepomucene-Jean-Hermann Nast (1754-1817). The factory, which operated until 1835, produced a huge variety of items, from luxury tablewares to domestic items such as chamber-pots, jars, and lamps. Its best period was following the Revolution (1789), when it was well known for its development of matt ground colours, in particular a chrome green. Decoration could be very lavish, with high-quality gilding and painted landscapes, Classical subjects, and grotesques; in 1810 Nast developed gilt relief borders imitating bronze, used mainly on cups and saucers. The factory made a range of biscuit figures and busts of Classical and mythological subjects, Napoleon, and other personalities of the Empire period, as well as blue-tinted biscuit wares in imitation of Wedgwood, such as clockcases and candlesticks. It also sold large quantities of undecorated porcelain, which sometimes bears the marks of other Paris factories, such as Darte Freres.
THE DAGOTY AND HONORS FACTORIES
The Dagoty and Honore factories formed a partnership between 1816 and 1820, after which they operated independently again. The best-known products of the partnership were richly gilded dessert, tea, and coffee services with animal-shaped handles and spouts, and butterfly-shaped knops. Eggcups and inkwells were modelled as snails or mythological figures, and larger cups as swans, shells, and tulips. On some pieces a red ground with gilt chinoiseries, imitating lacquer, was used, which is rare and highly sought after. Coloured grounds combined with landscapes, fable subjects, and figures based on Pompeian paintings were popular.
• BODY pure white, and even, hard paste with glassy, clear glaze; the dense, slightly sugary appearance of the paste can be seen on the often unglazed foot-rims
• DECORATION simple gilt borders of Classical motifs and scattered flowers; painted scenes with coloured and gilt grounds; painted imitations of hardstones and lacquer; rich gilding
• FIGURES biscuit figures of children, allegorical subjects

Beds
From the earliest times beds have been endowed with particular importance: as places of rest and privacy, or as symbols of power. The bed was
often the most important legacy, as it was regarded as a possession of consequence, representing the continuity of the family.
EARLY BEDS
The earliest European free-standing beds were basic structures comprising roofs, posts, and bases; the fabric hangings that decorated them were of greater value, and when noblemen moved around the country, they took their bedding, curtains, and valances with them, leaving behind the plain wooden construction. An early type of bed was the truckle or trundle bed on wheels, which conveniently slid under a standing bed when not being used by a servant. By the early 16th century most beds in northern Europe were made from oak; the heads were panelled and decorated with coats of arms, lozenges, chevrons, and lettering; squat, carved posts were placed at the corners, and testers (canopies) were added in the middle of the century. This form was replaced during the 17th century with a beech frame, with tester, ornate cornice, and a back covered in the same fabric as the curtains. On grand beds the posts were tall and more slender, with luxurious hangings crowned with finials, covered with the same material as the valance, from which issued ostrich feathers. More ordinary beds were hung with cloth, linen, or moreen.
18TH-CENTURY BEDS
British beds became more subdued at the beginning of the 18th century. Cornices became straight and projecting, and fringes and tassels disappeared in favour of plain trimmings. “Angel”, or half-tester, beds, without posts at the foot, imitating the French lit a la duchesse, retained the height of their four-poster counterparts.
The panelled back was reintroduced on mahogany bedsteads of the first half of the century, with cabriole legs ending in lion’s-paw feet, and slender posts with vase-shaped plinths replacing silk-covered uprights. By 1775 the cornice had become simple in outline, straight or serpentine, still complemented by vase finials at the four corners; the surface was carved and/or gilded, and cheaper wood frames, such as beech, were painted. On Neo-classical beds the posts were often very elaborately carved with such ornament as fluting, paterae, lion masks, and acanthus. Red damask and moreen were the favoured materials for ordinary beds, although in The Cabinet-Maker and Upholsterer’s Guide (1788-94) George Hepplewhite (d.1786) recommended the use of white dimity for “an effect of elegance and neatness”. Late 18th-century beds had a much lighter feel, with decoration taking the form of narrow, fluted posts delicately carved with wheat ears or husks or painted with ribbons and garlands of flowers. These clean light lines were echoed in the Federal period beds made in North America by such makers as Samuel McIntire (1757-1811) in Salem, Massachusetts, and Duncan Phyfe (1768-1854) in New York, the posts often decorated with Classical urn-form turnings with delicate reeding. Hangings were based on the designs in The Cabinet Dictionary (1803) by Thomas Sheraton (1751-1806) and Hepplewhite’s The Cabinet-Maker and Upholsterer’s Guide.
19TH-CENTURY BEDS
Beds in the French Empire style, particularly lits en bateau, are usually richly and exquisitely decorated in a restrained manner; the structure had large unbroken panelled surfaces veneered in both light and dark woods, which were sometimes used in combination, and decorative themes, usually represented in ormolu, included oak, laurel, and olive wreaths, shields, helmets, swans, lions, sphinxes, and vine-leaves. Beds were made in two principal types, both of which were meant to be placed in alcoves and seen from the side; therefore only one of the four faces was properly decorated. The first type was influenced by the beds of the Louis XVI era, with straight uprights in columnar or pilaster form, no roof or curtains or excess fabric, but lavishly decorated with bronze mounts. The second type was the lit en bateau, as it vaguely resembled a small boat, with two straight ends of equal height, and rolled over, linked by a steeply curved traverse. Both types were sometimes overhung with canopies in the style of earlier fashions. This is a type of bed particularly associated with the Biedermeier period.
The Empire style was the most important influence on English beds of the early 19th century, and numerous examples can be found in A Collection of Designs for Household Furniture and Interior Decoration (1808) by George Smith (active c.1786-1828), and in the journal Repository of Arts (1809-28) by Rudolf Ackermann (1764-1834). The desired goal was to achieve “tasteful simplicity” by having less drapery; mahogany, or rosewood posts decorated with bronzed or gilded “Grecian ornaments”; domed testers, and hangings of red, yellow, or blue silk or calico trimmed with lace or a fringe. By the 1820s the French couch form beneath a canopy was used, although this fashion was short lived.
Throughout the later 19th century revivalism dominated fashions. ln Italy the Renaissance Revival, known as “Dantesque”, was interpreted in heavily carved beds and others decorated with ally certosina, a style of ivory and bone inlay, which had been popular in the 16th century. In North America such firms as Berkey & Gay (est. 1859) in Grand Rapids, Michigan, designed suites of bedroom furniture in the Renaissance Revival style, while the firm of Prudent Mallard (1809-79) made high-post beds at his workshop (est. 1838) in New Orleans. In Britain the “Jacobethan” Revival gave rise to the production of heavily carved four-poster beds. Tubular brass was used for bedsteads from the 1820s, and as manufacturing techniques improved during the century, cast-iron beds were made. Iron campaign beds, first made in the early 19th century, were designed to be easily assembled and transported for use on the battlefield.
• ALTERATIONS four-poster beds have often been reduced in height because of changing circumstances; check that the decoration and carving continue up the piece completely; also check to see where any reductions have been made, as the frames may have been cut to make the bed narrower or have added sections of wood to make the bed wider or longer — look along the rails for tell-talc signs in the colour and wear of the timber.
• MADE-UP BEDS these can be made up of elements from other beds, and usually it is only the front posts that will be original; the most commonly found made-up beds are tester beds from the 16th and 17th centuries.

Davenports
An entry made in the 1790s in the records of the cabinetmakers Gillow (est. c.1730) of Lancaster states: “Captain Davenport, a desk”. This is thought to be the first recorded example of the small writing cabinets now called by the Captain’s name. It is not known whether he ordered the desk for his own use, or as a gift for a lady.
For most of the 19th century the Davenport was generally used by women. The basic form, consisting of a small chest-of-drawers with a desk compartment on top, changed very little over the century or so during which most examples were produced. However, there were many minor variations. Most Davenports have four drawers that open at the side of the base sections, with simulated drawer fronts on the opposite sides. Just above the drawers there may be pull-out slides to hold papers or finished letters. Some examples depart from this pattern, with cupboards concealing drawers, but either way the arrangement is symmetrical, with dummy drawers or cupboard doors matching the real ones. Many Davenports are fitted with casters, allowing them to be moved about easily; because of their free-standing nature, they should be well veneered and finished to the same standard on all four sides.
The top section typically comprises a desk with a sloping lid inset with a leather writing surface, and a flat ledge behind it enclosed by a brass or wooden gallery.
One or two small drawers for storing writing implements and ink pull out sideways below. The finest examples have ingeniously concealed hinged drawers.
The first Davenport has a top section that slides forward to accommodate the writer’s legs and is anchored by a simple iron rod sliding into holes lined up in the top and bottom. As the Victorian period progressed (from c.1847), the desk section was more often fixed in the writing position, and supported on elaborately scrolled or turned supports or brackets, allowing a recessed space for more leg room, and emphasizing the width of the piece. However, the catalogue of the firm of William Smee & Sons (est. 1817) of Finsbury Pavement in London, which is undated but was probably produced c.1840, shows examples with both sliding- and fixed-desk sections.
While mahogany was the most popular wood for Davenports, some of the finest examples were made in rosewood,
particularly during the Regency period. These were often embellished with stringing lines of brass, a contrast carried further by the use of decorative brass drawer-handles, gilt-brass galleries at the back, and brass tappings on the feet.
Most Victorian Davenports had wooden galleries, and these could take the form of simple mouldings, turned spindles, or lacy fretwork. Turned wooden drawer knobs also replaced earlier brass handles, but some of the finest mid-19th-century Davenports had brass galleries and gilt-brass candle sconces on rotating arms fixed to the sides of the desks toward the back.
The popularity of the Davenport continued until the end of the l 9th century, but few of these late examples, often over-ornamented and of generally clumsy proportions, matched the quality of craftsmanship of those made up to the 1860s.
• CONSTRUCTION two main types: the plain Regency
box-type, which has a reading slope that slides.
forward, creating a comfortable knee aperture, and the type introduced c.1840, which has a rising superstructure and a recessed knee aperture
• WOODS the most common woods used were rosewood, mahogany, and burr-walnut.
• MECHANISM the rise on the mechanical Davenport runs on a leather belt and weights; it is released by a spring lock that opens to reveal pigeon holes and drawers.
• COLLECTING the Regency Davenport tends to be more popular than later Victorian examples; although collectable, Davenports are not as usable as bureaux; good-quality examples are well finished on all sides, and also on the inside.