Posts Tagged ‘18th century mass produced tableware’

19th Century Victorian English Porcelain Parian Busts and Statues

Wednesday, May 13th, 2009

19th Century Victorian English Busts and Statues
Parian, or “statuary porcelain”, was possibly the most significant ceramics development in Britain during the Victorian period. Named after the Greek island of Paros for its resemblance to the white marble quarried there, parian was a bone china that contained a high degree of feldspar, which meant that it did not need a separate glaze. Decorative wares could therefore be displayed without becoming dirty, unlike earlier biscuit, or unglazed, white porcelain, which was coarse and difficult to clean. First made in the 1840s, parian was capable of being moulded without losing any detail, with the result that contemporary sculptors could have their works successfully reproduced for the mass market. Parian was also made in the USA at the United States Pottery in Bennington, Vermont.
IMPORTANT MAKERS
There remains Uncertainty as to which factory invented parian. The firms of Minton & Co. (est. 1793) and Copeland (1833-1933), both in Stoke-on-Trent, claimed to have discovered the secret; both were making parianlike porcelain by the mid-1840x, and at the Great Exhibition of 1851 in London they displayed an extensive range of parian subjects. Other famous makers included Royal Worcester (est. 1862), Coalport (est. c.1796), and Wedgwood (est. 1759), all of whom made a range of wares, figures, and busts, while Wedgwood also made impressive, large figure groups. Smaller portrait busts were the speciality of Robinson & Leadbeater (est. early 1860s), in Hanley, and others were made by the firm of Goss ( 1858-1940), in Stoke-on-Trent. Parian dominated English porcelain production for display objects for about 40 years, and a great deal survives.
PORCELAIN BUSTS AND STATUES
Models for parian were provided by eminent Victorian sculptors, whose full-sized statues could be reduced in size and reproduced in quantity for commercial sale without losing quality. The work of contemporary sculptors such as John Bell (1812-95), Raphaelle Monti (1818-81), and Sir Thomas Brock (1847-1922), together with famous Classical statues housed in museums, could be reproduced and sold to a wide public. A device known as “Cheverton’s
Reducing Machine”, patented by Benjamin Cheverton in 1844, was developed to allow subjects to be scaled down and cast in moulds for the ceramics factories. Busts were made of various subjects, including royalty, politicians, philanthropists, poets, composers, and
characters from antiquity. Figures ranged from meaningful allegories to barely disguised eroticism; for example, The Greek Slave, a controversial sculpture by the American sculptor Hiram Powers (1805-73), was displayed at the Great Exhibition of 1851 and copied by Minton & Co. Many parian figures were made either for the Art Union of London or for the Ceramic and Crystal Palace Art Union, which were lotteries set up by philanthropic Victorians to raise funds for the arts; parian works were frequently offered as prizes. The manufacture of artistic parian gradually diminished in favour of the large-scale mass production of portrait busts, and little of any consequence was nude after c.1880.
• BODY fine, highly vitrified, generally pure white
• FINISH matt, semi-matt, or with a slight surface sheen
• PRODUCTION usually slip-cast, therefore quite light
• FORMS sentimental figures; figures Of politicians, royalty, and composers; literary, religious, and allegorical subjects; copies of famous Classical statues housed in museums; works by Victorian sculptors
• IMPORTANT MANUFACTURERS Minton & CO.,
Copeland, and Robinson & Leadbeater

Antique Writing Cabinets-on-Stands

Thursday, May 7th, 2009

Writing cabinets-on-stands
Small slope-topped writing boxes were known from medieval times, and during the 16th and early 17th centuries they continued to be associated with the needs of a highly educated elite. With their sloping lids, often lipped at the lower edge, they could double as reading lecterns, and many were decorated with carving, inlay, or painting. Inside they were fitted with compartments and small drawers for papers and writing equipment. Conveniently portable, they could be used on top of a table or chest.
EARLY CABINETS-ON-STANDS
During the second half of the 17th century a new form of writing compendium, with its own base support, was developed. Also known as a scriptor, or, in France, an escritoire, the writing cabinet-onstand was a rectangular structure, based on the
Spanish vargueno (writing desk) Instead of a sloping lift-up top, it had a fall front concealing drawers and pigeon holes, which opened to form a writing surface supported on cords at either side. The exterior presented an inviting
surface for veneering. Fine examples were made with oyster veneers of walnut or cocus wood, or with floral or “seaweed” marquetry; some cabinets were inlaid with ivory and mother-of-pearl, or japanned to imitate Oriental lacquer. The most spectacular, japanned in brilliant colours on white or light-coloured grounds, were by Gerard Dagly (1657-1715) of Berlin. The legs of the stand were baluster or spiral turned typical of fashionable furniture of this period. Already, by the close of the I 7th century, many of these cabinets had a distinctly feminine flavour, with compartments for toiletries, jewellery, and writing equipment.
Alongside the development of the mainstream bureau and bureau cabinet in the early 18th century was that of the slightly built slope-topped writing desk of bureau form, set upon a cabriole-legged base, with frieze drawers. Some of these desks were surmounted by toilet mirrors, showing their dual function as writing and dressing tables. Typically, they were veneered in walnut or marquetry, but some fine examples are decorated with japanning.
drawer below. French examples were lavishly decorated, with gilt-bronze mounts and fine marquetry veneers of unusual woods, and sometimes with porcelain plaques, or panels of Oriental lacquer. By the last quarter of the 18th century the cabriole supports – the last vestiges of the Rococo – were discarded in favour of straight-tapered legs, often with gilded grooves and understretchers.
The English interpretation of the bonheur du jour was more restrained, relying for its elegance on finely figured timbers and well-judged proportions; edges were straight and legs square tapered. Mahogany or satinwood was often contrasted with bandings or panels of rosewood, sycamore, tulip, or box. Both French and British styles were adopted by cabinet-makers in other parts of Europe. Porcelain plaques, marquetry, and ormolu mounts all appear on bonheurs du jour in Germany, Austria, and Poland, but the structure of such pieces tends to be spare and square rather than voluptuous.

• WRITING CABINETS-ON-STANDS some early very
fine examples were decorated with veneered with burr-walnut, oyster veneering or marquetry (floral or “seaweed”), inlaid or japanned; this type of furniture although not always very useful (unlike the bureau in all its forms) is very desirable, so unless the decoration is very badly damaged, they will still generally command high prices.
• BONHEURS DU JOUR usually very popular items of decorative furniture; those made in the late 18th-century style of Sheraton are particularly popular.
LATER CABINETS-ON-STANDS
In France, luxurious writing-cum-toilet tables for use in ladies’ apartments were made in large numbers from the beginning of the Rococo period in the early 18th century. Veneered in fine marquetry of exotic woods, and with cabriole legs, they were embellished with cast-and gilt-bronze mounts. Some of these bureaux de dames had sloping lids to the superstructures, while another type, the secretaire n capucin, had a flat writing surface opening out from the table top, and a superstructure of drawers and compartments rising from the back. By the late 1760s the bonheur du jour was an established form of ladies’ writing table. As its name suggests, it was destined for the feminine “delight of the day”, i.e. letter writing. It had a flat writing surface at the front, varying arrangements of shelves, drawers, or small cupboards at the back, and a drawer below. French examples were lavishly decorated, with gilt-bronze mounts and fine marquetry veneers of unusual woods, and sometimes with porcelain plaques, or panels of Oriental lacquer. By the last quarter of the 18th century the cabriole supports – the last vestiges of the Rococo – were discarded in favour of straight-tapered legs, often with gilded grooves and understretchers.
The English interpretation of the bonheur du jour was more restrained, relying for its elegance on finely figured timbers and well-judged proportions; edges were straight and legs square tapered. Mahogany or satinwood was often contrasted with bandings or panels of rosewood, sycamore, tulip, or box. Both French and British styles were adopted by cabinet-makers in other parts of Europe. Porcelain plaques, marquetry, and ormolu mounts all appear on bonheurs du jour in Germany, Austria, and Poland, but the structure of such pieces tends to be spare and square rather than voluptuous.

About

Friday, May 1st, 2009