Posts Tagged ‘american factories’

JUG  DARK GREEN BOTTLE GLASS Willi
c OMBED OPAQUE WHITE THREADED DECORA I KIN
England, laic iSth early 19thcentury
Hi. 105 mm (4-13 in.)
PIPE IN (TEAR COLOURLESS GLASS WITH OPAQUE
WHITE STRIPED DECORATION
Probably Sowerby’s Ellison Glassworks, England,
about 1X60. I.englh 367 mm (145 in.)
Vessels made from bottle glass, and later
clear glass, with applied glass threads,
usually opaque white in colour, marvered
and combed to the surface of the glass,
have come to be known as ‘Nailsea’ glass.
The tradition that associates this type of
glassware with the Nailsea glass-house,
near Bristol, England, is a strong one, but
since this factory made crown window
glass, the earlier bottle glass wares arc
unlikely to have been made there. Because
most of these vessels were made as a
sideline, little documentary evidence re-
mains to show exactly when and where
they were produced. The few dated
examples come from the early part of the
ioth century. It is known that clear glass
‘Nailsea’ type wares were made at a glass-
house in Warrington in Lancashire. ‘Alloa’
glass is the Scottish term for a ‘Nailsea’
style glass. Though there is little direct
e\ idence, there is no reason why the Alloa
Glass-house in Scotland should not have
produced this glassware.
Many other simple wares in a style akin to
‘Nailsea’ glass were produced in the first
half of the 19th century. Among these were
the friggcrs, or glass fantasies—unlikely
objects such as fantastic tobacco pipes,
rolling pins, walking sticks, shepherds’
crooks, bells, witchballs and musical in-
struments represented in glass. Many of
the rolling pins and most of the tobacco
pipes have applied glass threads in opaque-
white or coloured glass, in true ‘Nailsea’
tradition. It is impossible to say where
most friggcrs were made, and they should
be considered as individual pieces of glass-
makers’ skill made both for amusement
and for commercial purposes. They were
produced as private sidelines in the largest
window glass concerns such as Pilkington
Brothers of St. Helens. Probably triggers
were made throughout the 10th century
but a new interest in them appeared at the
end of the century, when small factories
started to produce ruby pipes and bells,
spun glass ships and birds and walking
sticks in quantity.
JUG IN AMBER GLASS WITH WHITE BLOBBED
DECORATION
Found in one of the Aegean islands, mid-tst
century A.D. Ht. 238 mm (9*35 in.)
Marvering small pieces ofglass into the body
of a vessel is a somewhat cruder form of
decoration than applied glass thread-work.
The Romans certainly favoured this mode
of decoration for their vessels. This jug, in
amber-coloured glass, has opaque white
blobbed decoration. The white blobs cover
the whole of the body and the neck of the
vessel, though only a few stray ones can be
found upon the base. Pieces of white
opaque glass would have been scattered on
a flat stone slab (marver) and caught up on
the hot gather of amber glass on the
Roman glass-worker’s blow-pipe. By work-
ing the gather of glass on the marver, he
would bring the white glass level with the
surface of the amber glass, so that a smooth
surface was achieved when the vessel was
eventually blown. This 1st century A.D.
decoration was probably produced in
Northern Italy.
Adding: The Glass-maker’s Skill
FLASK IN PALE BLUE GLASS WITH ‘PEBBLED’
DECORATION
France, 17th century. Ht. 157 mm (6-13 in.)
Though the technique was never wholly
forgotten, the next notable instance of
small pieces of glass being used as a
decoration on the surface of the vessel
came in France in the second half of the
16th century. The technique had been
practised by the Venetians, and was copied
from them by the French glass-makers.
Their multi-coloured ‘marbled’ or ‘peb-
bled’ glass usually consisted of bright
opaque colours splashed on a light blue
glass ground. Shapes favoured by the
French glass-house which produced this
glass were the characteristically French
pilgrim-bottle and barrel-shaped vessels.
There are ample records that Venetian and
Altarist glass-makers worked in France
from the late 15th century onwards,
though few examples of their work have
been recognised. This ‘pebbled’ glass is a
genuine example of French glass a la
fag on de Venise, but remains distinctly
French in style.
Adding: The Glass-maker’s Skill
JUG IN GREEN BOTTLE GLASS WITH FLECKED
DECORA! IDS
England, 18th century. Ht. 181 mm (7-13 in.)
Glasses with flecked decoration, consisting
of fragmented coloured glasses marvered
into the surface of the glass, have often
been brought under the general heading of
‘Nailsea’ glass. This was indeed a charac-
teristic form of decoration for ‘Nailsea’
glass, besides the bold looped and striped
decoration described in the previous sec-
tion. As already mentioned, ‘Nailsea’
glass must be regarded as a style rather
than as a product of any specific glass-
house. Generally speaking, ‘Nailsea’ glas-
ses were made in green bottle glass,
which was used for its cheapness, as it
avoided the Glass Excise Acts of England
(repealed in 1845). Clear glass with striped
and flecked decoration is sometimes also
ascribed to Nailsea and Wrockwardine
Wood, though it was probably produced at
many of the other centres that made this
type of glassware. Products notably in-
cluded jugs, bottles and flasks in the flecked
ware, though more fanciful examples can
be found, such as top hats.
Hobhs, Brockunier& Company, U.S.A., 1884
Ht. 152 mm (6 in.)
In 1884 a patent was issued to William
Leighton, Jr, of Hobbs, Brockunier &
Company of Wheeling, West Virginia, for
his method of producing ‘Spangled Glass-
ware’. His process was a simple one. Flakes
of biotite or mica were laid on a marver and
picked up on a gather of opaque white or
transparent coloured glass. The gather
with the flakes adhering was then dipped
into a pot of clear colourless glass, which
locked in the ’spangles’. The gather could
then be blown and shaped into the desired
article. Spangled glass became one of the
most popular products in both art and
table glassware produced by the Wheeling
company. Sowerby’s, of Newcastle-upon-
Tyne, England, produced a similar ware,
usually with a deep blue base called ‘Blue
Nugget’. ‘Spatterglass’ is similar to Span-
gled glass, except that instead of metallic
flakes, variously coloured fragments of
glass were marvered into the opaque white
or coloured glass base.
About 1884. Ht. 127 mm (5 in.)
In the same style as the foregoing were the
so-called ‘Vasa Murrhina’ glass products.
Coloured glass and mica flakes were em-
bedded in the opaque base, with an overall
transparent casing. John Charles De Voy
of the Vasa Murrhina Art Glass Company
of Sandwich, Mass., and Hartford, Conn.,
registered a patent for this type of glass-
ware in 1884. Sheets or particles of mica
were coated with gold, silver, copper or
nickel. The coated mica was then incor-
porated on to a gather of glass, which was
subjected to heat. This caused the glass to
flow over and adhere to the mica. The
gather could then be blown into the article
required. Shards of ‘Vasa Murrhina’ type
glass have been found on the site of the
company’s factory in Sandwich, also on
the old factory site of the Boston &
Sandwich Works. Patents for this type of
glassware were registered in England
between 1878 and 1882.
WINE-GLASS INCORPORATING rHREADS Of OPAQUI
WHITE GLASS
Venice, Italy, 16th century. Ht. 131 mm (5-13 in.)
Incorporating threads of opaque white glass
into the body of a vessel was a development
of the Venetian glass-makers. Thin rods
of opaque white glass (lattirno) were
probably set at exact intervals round the
inside of a heat-resistant open container.
A gather of clear, colourless glass would be
blown into the centre of the container, and
the rods of glass caught and worked very
gently into the gather of glass. The bubble,
now containing the white threads, could
then be blown to the desired shape.
Another method that might have been
used by the Venetians was to lay alternate
rods of opaque white and clear, colourless
glass side by side on a tray, and then to fuse
them together in a kiln. These could then
be caught up on a gather of clear, colour-
less glass and blown to the shape required.
In both these processes, in order to make
the ends of the rods meet, the end of the
bubble would have to be pinched together
and the unwanted glass cut away.
The influence of Venetian glass-making
spread all over Europe, notably to Spain,
Germany, France, the Netherlands and
England, during the 16th and 17th cen-
turies. Thus the technique of incorporat-
ing threads of lattimo glass into the body
of a vessel appears in other glass-making
centres besides Venice. Each of the Euro-
pean countries mentioned developed its
own version in the facon de Venise, the
influence of the local glass-blowers making
itself felt, so that pure Venetian inspiration
vanished and strong regional characteris-
tics began to prevail in the glassware. The
jug illustrated—a remarkable example of
the use of broad vertical bands of lattimo
glass between very narrow lines of clear,
colourless glass—is, in shape, a vessel of
typical late mediaeval form in the Southern
Netherlands. The contemporary value of
the piece is reflected in the use of silver-
gilt mounts on rim, handle and base. A
similar glass is listed in the 1559 Inven-
tory of Queen Elizabeth I of England.
In Roman times glass-makers sometimes
decorated the edge of vessels with a rope-
pattern, where an opaque white thread was
twisted and embedded in clear, colourless
or coloured glass. This is the only early
parallel to the Venetian technique of
incorporating threads of white glass into a
vessel. The Italian glass-makers who
migrated to other countries, and their
pupils, certainly had full command of the
technique. As well as the illustrated flute
glass, which has made delicate use of the
technique in the long bowl, handsome-
tankards employing the technique were
produced at Liege or in the Netherlands.
In Germany, the popular tall cylindrical
glass, or ‘Stangenglas’, was not only made
of cristallo glass, but was often decorated
with these bands of lattimo glass incor-
porated into the vessel. Rarely, coloured
as well as opaque white threads were used,
in colours like yellow, purple and blue.
Adding: The Glass-maker’s Skill
A superb sophistication of” the technique
just described is shown in the plate
illustrated. It is in fact made up of two
plates, with opposing white radiating
thread decoration, which were fused to-
gether to form one piece. Tiny air bubbles
were caught between the threads, giving
the plate a rich and delicate appearance—a
wonderful example of the Venetian glass-
maker’s versatility. The essentials of the
technique have been copied successfully
by the American glass artist and tech-
nologist, Dominick Labino, of Grand
Rapids, Ohio. He placed 12 opaque white
threads in a metal container at even dist-
ances and worked these into a gather of
glass, as already described. He then blew
the gather into a bubble, catching the end
of it and twisting the glass one way so that
the threads spiralled to the left. After
forming a bowl shape, he put this into a
specially prepared crucible and placed it in
the annealing kiln to keep warm.
The next stage in the production of
Labino’s vetro di trina was to repeat the
procedure with another gather of glass.
this time with the 12 threads spiralling to
the right. The first bowl shape was then
taken out of the annealing kiln in its
container, and the second partially-blown
gather dropped into it, so that the two were
joined when further blowing was em-
ployed. The two joined paraisons were
then reheated, and a further gather of glass
taken over them, to give the finished object
added strength. From this Labino formed
in the usual way a dish which had opposing
white radiating thread decoration in the
Venetian tradition. The Italian name for
this type of glass means iace glass’; in
German it is known as ‘Netzglas’. Apsley
Pellatt in his book Curiosities of Glass-
making (London, 1849) describes basically
the same technique, whereby two cup-like
formations, one with milk-white canes
spirally applied inside the cup, the other
with milk-white canes spirally applied
outside, were combined, the former over
the latter, to produce a vessel in vetro di
trina. The technique was used in England
and on the Continent in the 19th century.
In the mid-iqth century, Bohemian,
French and English glass factories all
imitated Venetian techniques of glass
manufacture. This included the incor-
poration of opaque white or coloured
threads of glass into the body of a vessel.
So-called 19th-century ’striped’ glass fol-
lowed this technique. Coloured and clear,
colourless glass rods would line a mould.
A bubble of glass blown into the mould
picked up the rods, and they became as one
with the body glass. When the bubble of
glass was deftly twisted, the embedded
rods could be made to spiral around the
body of the finished vessel. To produce
the fine effect seen on the ewer illustrated
demanded a considerable amount of skill
on the part of the glass-maker. A patent
for ‘Improvements In Decorating Glass
With Stripes’ was taken out in 1885 by
V\ illiam Webb Boulton of Bonbon &
Mills, who had the Audnam Bank glass-
house in England.
Ice Glass: The Venetians decorated some
clear glass by plunging a bubble of hot
glass for a moment in water and then
reheating it. This produced a roughened,
fro/en or crackled appearance, given the
name ‘Ice Glass’. A further means of
producing a frosted effect upon glass is to
roll a bubble of glass over a marver that
has previously been covered with frag-
ments of broken glass. The fragments
adhere to the hot bubble, and when the
whole is slightly reheated, form an ‘icy’
effect. The bubble can then be worked to
form the desired article. The beaker
illustrated is a handsome example of the
Venetians’ work. The frosted texture is
only on the outer surface of the glass, the
interior surface remaining smooth to the
touch. Visually, these pieces appear to be
covered with cracks, but the reheating
makes them perfectly whole and quite sale
for use. Once the technique had been
invented by the Venetians, it spread
quickly throughout the Continent.
Apsley Pellatt (1791-1863), the 19th-
century glassmakcr of the Falcon Glass-
house in Southwark, London, continued
to make his mark on his trade by the
publication of two books on glass-making,
published respectively in 1821 and 1849.
In his Curiosities ofGlassmaking, published
in 1849, he described several of the
Venetian techniques, including the pro-
duction of ‘Ice Glass’ or frosted glass. At
the 1851 exhibition his firm made a special
display of the technique, which he called
‘Anglo-Venetian’. In his explanation he
shows how a gather of glass was slightly
inflated, then plunged at nearly white heat
into cold water; it was then immediately
reheated, giving a crackled effect on its
outer surface. The bottom of the bubble
was flattened and a pontil rod attached;
the blow-pipe was removed and the article
finished on the pontil rod. Great care had
to be taken not to overheat the article, as
this would melt out the frosting.
Apsley Pellatt claimed that the technique
of ‘Ice Glass’ was known and practised
only by the Venetians until he revived it in
the mid-i9th century. This would seem to
be incorrect, since several examples of the
technique are to be found from the
Continent between these dates. At first,
only clear colourless ‘Ice Glass’ was pro-
duced, to simulate real ice, but mid-igth
century fashion soon desired it to be
coloured. Usually the base glass was
coloured in ruby, rose, yellow, blue or
green, the fragments picked up being clear
and colourless. Occasionally the reverse
happened, the fragments being coloured
and the base glass clear and colourless. Ice
Glass known as ‘Craquelle’ and ‘Overshot’
was produced by the Boston & Sandwich
Works, and possibly by some other
American factories. It was advertised in
1883 by Hobbs, Brockunier & Company in
‘Rose, Sapphire, Old Gold and Marine
Green’ colourings.

Vases
Vases are designed for displaying floral arrangements, but as solitary objects they enhance a room’s decor. Instead of being merely flower containers, they are considered art objects or decorative accessories, depending on their price. Like table wares, Deco vases were made of either pottery, porcelain, glass or metal. The photographs in this section are arranged in that order.
French art glass vases are the most expensive. Examples shown here include pieces by Legras, Schneider and Verlys. Other French manufacturers such as Baccarat, Lalique and Galld perhaps are more famous. But as their creations have become scarce and very costly, other factories’ products have gained recognition. Consequently, most French art glass has moved entirely out of the range of the moderate collector.
For Deco image, however, less expensive vases made by European and American factories are quite pleasing. Much of this glass is unmarked and not attributable to any one factory. Lack of identification may serve the collector well when Deco shape rather than company or artist is the major concern. Czechoslovakian glass made between 1918 and 1939 has been gaining interest among Deco collectors for several years. Most of the pieces are marked “Czechoslovakia” or “Made in Czechoslovakia.  The shapes and vivid colors of this good quality glass are quite representative of the Deco era. Prices usually remain moderate. Black milk glass or black amethyst glass made during the 1920’s and 1930’s is another type of relatively inexpensive glass with Deco overtones. Black glass was made by several American factories, but most pieces are unmarked.
American glass makers such as Cambridge, Fostoria, Heisey and New Martinsville, to name a few, are noted for stemware and serving dishes, but vases and other decorative items also were produced by these factories. Clear and colored glass vases were sometimes made to match the modern table ware patterns. Fan shapes, blocked geometric forms and even etched nude designs project a Deco theme. Although this type of glass is avidly collected by Depression glass collectors, prices are far less than those for French art glass.
The most expensive ceramic vases are those made by European art potteries. Art pottery, however, usually is priced lower than art glass. This is apparent when prices are compared for the Amphora and Boch Freres ceramic vases with those for the Legras and Verlys glass examples. American art pottery is generally lower in price than European. Among American Art potteries, attention is being paid to the Deco production made by companies such as Roseville. Less expensive vases are Japanese or American pottery varieties which were sold by dime stores or florists’ shops. The angular white glazed Japanese vase shown here was originally cheap, but the striking Deco shape has caused its current value to increase sharply.
Porcelain vases are medium priced with few being either bargains or exorbitantly high. Porcelain is superior to simple pottery because it is stronger and translucent, but those qualities are not always reflected in prices. Most European porcelain vases are less expensive than European art pottery. The reason is because many decorative items such as urns, vases and jardinieres were produced in quantity by porcelain factories. Moreover, they were often decorated with transfer designs or exported as undecorated vases. The latter were purchased by aspiring amateur china painters, and thus the decoration is not as creative or professional as that of art potteries.
Metal adapts well to angular shapes. Although glass and ceramic vases are more common, those made of brass, bronze, copper or chrome often evoke the Deco image in a more eye-catching way. The chrome vases pictured here are priced at the low end of the scale, but the Deco features are quite obvious. Brass and copper vases vary in price depending on size, but most are over $ 100. The sterling on bronze vases were made by the Heintz Art Metal Company. Such pieces are rarely less than $100 or more than $300. French bronze vases may be out of an affordable price range for moderate collectors. But an urn like the one shown, or similar vases, is usually considerably less than a bronze statue would cost. If French bronze would lend a note of prestige to one’s collection, such vases are a good choice.