Posts Tagged ‘antique silver candlesticks’

Early chests-of-drawers.
The chest-of-drawers as we know it today essentially evolved during the 17th century. During the 1600s it was adapted and modified until the ideal balance and most practical formula were found. The system of graduated drawers, with the most shallow at the top and the deepest at the bottom, was only really reached right at the end of the century. However, it should be remembered that throughout the 17th century chests and coffers were still the principal items of furniture used for storage.
THE EVOLUTION OF THE CHEST-OF-DRAWERS. The 16th and 17th centuries were times of considerable social change in Europe, when a number of new items of furniture were introduced. The chest-of-drawers was one of these new forms, and through its development in the 17th century it is possible to chart the progress of furniture-makers and the emergence of the cabinet-maker. Although new methods of construction (including dovetailing) were developed and refined during the 17th century, the chest-of-drawers was largely made with joints secured by iron nails; only at the end of the century was dovetailing preferred.
From the mid-16th century, the concept of the drawer became widespread in countries that were influenced by the courts of Spain and Italy. In Spain the vargueno (writing desk) was one of the most important of the furniture forms that influenced the development of numerous furniture types throughout Europe. The contribution of the Moors, who occupied much of Spain until 1492, is particularly evident in the skilled work of the Spanish craftsmen working in the mid-16th century. The numerous small drawers in the vargueno were made using tight dovetails and precisely cut drawer-linings. The vargueno could either have a stand in the form of a small table, or a base that was sometimes enclosed by doors, but often had four exposed drawers.
In the province of Zeeland in the southern Netherlands, which was under Spanish rule between 1482 and 1794, a type of square chest, usually measuring 1.5m (4ft 11in) high and 1.7m (5ft 7in) wide, was made. Like the beeldenkast (cupboard) made in the northern Netherlands, this type was in two sections, sometimes with a central drawer between the two, enclosed by a pairs of doors.
In Britain, the drawer was not introduced in any significant number until the end of the 16th century, when they were added to coffers and cabinets. They were called “tills” or “drawing-boxes”, and the word “drawer” is derived from the latter. From the mid-16th century the term “till” was used to denote a drawer where money was kept, an association it still retains. A coffer or chest could be fitted with drawers, and was then known as a mule chest. An early, hybrid form of the chest-of-drawers and cabinet was made front the mid-17th century; this had a shallow frieze drawer at the top, a deep drawer beneath, and three further drawers enclosed by two doors in the lower section. Graduated drawers were introduced later in the century. These oak chests are still linked to the old form as some had hinged tops, opening to reveal box compartments.
During the later 17th century the chest-of-drawers evolved rapidly. Many were constructed on spiral-turned, double spiral or S-scroll stands (often with a drawer or series of drawers in the stand), stretching to about 1.5m (4ft 11in) in height so that the top drawers were easily accessible. This form is similar to the cheston-stand. By the end of the 17th century the chest-ofdrawers in its familiar form had evolved — the chest was taken down from the stand and rested instead on feet, at first of bun form (introduced (.1690) and later of bracket form (introduced c.1725). It is extremely common for feet to have been replaced either owing to damage from wear or woodworm or as a result of changing fashions and the desire to “improve”.
CONSTRUCTION AND WOODS.
In the Low Countries and Britain during the mid- I Century the chest-of-drawers was made by a joiner. It was constructed of solid oak, often in two parts, with panelled sides and heavy drawers that ran on bearers set into the sides of the carcase. The bearers slid into grooves cut into the drawer-lining along the centre of the outside edge. The joined construction was clearly visible from the outside and can now be seen to form part of the decorative appeal.
By the end of the century the cabinet-maker had become increasingly dominant, and joined furniture was therefore relegated to the provincial areas. Chests-of-drawers made in important centres of furniture production now had oak linings, and the carcase and drawers were secured by dovetailed joints. The thick wood that was required for mortise-and-tenon joints disappeared; consequently the thickness of the drawer-linings diminished, and drawers were set to run on their bases or on bearers set underneath the drawers.
In Spain and Italy forms tended to be heavy and thick in construction, still retaining panelled sides, and the drawer-linings were normally made of pine. In central and northern Europe dovetails and drawer-linings became smaller and more delicate; in Italy they remained much less refined, and of much larger form, right through to the 19th century.
Although, throughout most of the 17th century, oak was the preferred wood in England when furniture was made in the solid, walnut was increasingly popular as the veneer for fine furniture because of its figuring and rich colour. In Spain and Italy walnut was the most common wood used in the solid. In France timbers imported from the overseas provinces were used from an early stage. Ebony was one such exotic wood and gave rise to the term ebeniste (cabinet-maker).
Towards the end of the 17th century, great efforts were made to enrich the visible surfaces of the chestof-drawers, and considerable expense was lavished on the large surface areas. The most popular forms of decoration were veneering with burr woods, oyster veneering, seaweed marquety, and floral marquetry. This explosion of creativity was a far cry from the heavy, joined chests made just 30 to 40 years earlier. This rapid pace of change – which was much slower
in the provinces – continued in construction, decoration, and design well into the next century.
The chest-of-drawers was adopted in all the wealthy circles as a new piece of furniture, and soon gained favour in all the countries of Europe. It took such forms as bachelors’ chests, commodes, and chests-on-chests.
• SAW MARKS until the end of the I 8th century the method of sawing wood for the carcase left straight saw marks; from the end of the 18th century a circular saw was used, which left circular saw marks; these marks should be visible on the inside of the carcasefeet.
• it is common to find pieces of this period without their original feet; bun feet have often been replaced by bracket feet; look underneath the chest for old holes into which the bun feet would have fitted.
• HANDLES these may have been changed; look for the bruise marks on the woodwork to see where the original handles (usually drop) would have rubbed or swung.

Candelabra – table candlesticks with branches for extra lights – began to be made from c.1660 and increased in popularity, throughout the 18th and 19th centuries. A candelabrum consists of a central shaft with two or more detachable scroll branches supporting candle sockets; sometimes there is also a socket at the top of the shaft. Made in similar styles to candlesticks and by the scone makers, candelabra were likewise generally produced in pairs. Most found today, are in good condition, because they were better made and much more expensive than candlesticks and therefore were not subjected to the same amount of wear or damage.
THE EARLY 18TH CENTURY Silver Candelabra
Although examples are known from the late 17th century, few candelabra dating from before the 1770, survive today. Until the late 18th century most had two branches, but matching branches and stems were not particularly popular or fashionable until c.1750. As on candlesticks, detachable nozzles for the sockets appeared c.1740. To be of value to collectors, a candelabrum should have all its separate parts – the branches, the nozzle, and the stem – in the same style and hearing the same maker’s marks. Before -.1750 branches were often considered awkward and so were discarded and the stem used as a candlestick.
French silversmiths createdd some of the finest Rococo candelabra in the early and mid-18th century. One of the most famous examples is a single three-hranched candelabrum designed in 1734-5 by juste-Aarele Meissonnier (1695-1750), Royal Goldsmith to King Louis XV of France, and executed by Claude DLIVivicr (1688-1747) for the English Duke of Kingston. It has an extraordinary, asymmetrical, spiralling stem with three richly sculpted branches ending in flower-shaped sockets, and a cast finial in the form of a cluster of leaves, which can be removedto hold a fourth candle. Such pieces fully exploit the plastic, sculptural qualities of cast sib, er, and had a particular influence in England, where elaborate Rococo candelabra were made by such leading silversmiths as George Wickes ( 1698-11-61) and Paul de Lamerie (1688-1751) in the 1740s and 1750x. All such pieces are exceptionally rare and valuable today and fetch high prices on the market.
THE LATER 18TH CENTURY Silver Candelabra
In the early 18th century the hour for dining was generally about 3p.m., but lit the latter part of the century it was put back and the main meal of the day was often eaten after dark. For this reason, more light was needed, and so candelabra from the 1770s onward usually have at least three branches. Elegant and light Neo-classical forms, with fluted or plain tapering baluster stems, simple, slender branches, and urn-shaped sockets, all decorated with beading and reeding, were especially popular. Such designs were produced in cast and loaded sheet silver and Sheffield plate; some candelabra have silver stems but Sheffield plate branches, perhaps to reduce the cost. Similarly, candelabra made entirely in Sheffield plate often had a matching set of more expensive silver candlesticks.
THE EARLY 19TH CENTURY Silver Candelabra
Massive, heavy silver-gilt candelabra are characteristic of the Regency period. Made largely to impress, these often form part of elaborate table centrepieces. Magnificent candelabra were made by the leading English goldsmiths Rundell, Bridge & Rundell (est. 1805) and by Paul Story (1771-1844) for the Prince of NXiale, (later King George IV) and his circle. Such pieces – such as one made by Edward Farrell in I824 – have five or more branches, sometimes with double sockets, and stems lit the form of caryatids or mythological figures. Earlier candelabra were often altered to suit new tastes: a pair of candlesticks ordered by the Earl of Carlisle from the firm Parker & Wakelin (est. -.1758) in 1770 was supplemented with double branches in 1780 and triple branches in 1826.
THE LATER 19TH CENTURY Silver Candelabra
Most candelabra made in the later 19th century are of loaded sheet silver or plate, and many have figures supporting the candle sockets or as decoration on the base. After the introduction of oil lighting, some candelabra were converted to oil lamps. in the second half of the 19th century a huge range of items, including candelabra, was produced using the new method of electroplating. Following the invention of the electric battery in the early 19th century, an English doctor named John Wright experimented with electrolysis to coat the surface of base-metal objects with precious metal. In 1840 the Birmingham firm of Elkington & Co. (est. c.1830), in partnership with Wright, took out the first patent for this new process. Known as “electroplating”, it involved the immersion into a plating bath of a nickel object attached to a positive anode and a block of pure silver attached to a negative anode. When the electric current was switched on, silver particles passed through the solution and were deposited on the nickel object; the same process could be used both for gilding and for replacing worn objects.
The introduction of electroplating led quickly to the decline of the Sheffield-plate industry. The new process was far safer than the old one, but its main advantage was that it enabled objects to be formed entirely by traditional silversmithing methods before being plated, making complex sculptural ornament possible. By comparison,handles and borders made in Sheffield plate had to be silver. Condition Is important stamped out from sheet silver, filled with lead, and applied.
Elkington & Co. and the marm, other electroplate manufacturers established in the 1850s and 1860s produced a huge range of electroplated items, from chargers, ewers, and centrepieces richly decorated with valuable ornament in various historical styles to cutlery, frames, and spoon-warmers. Elkington employed the French sculptor Leonard Morel-l.aclertil ( 1820— ) to design splendid Renaissance-style pieces for display at international exhibitions. The firm also used the process of electrotyping - taking a mould front an object and depositing onto it a thin layer of silver, backed with base metal - to produce facsimile copies of a number of historically important pieces of silverware, in particular a collection of Tudor and Jacobean silver held in the Kremlin Armoury in Moscow.
Since such large quantities of electroplate still exist, it is important to buy pieces in the very best condition. Electroplate can usually be distinguished from Sheffield plate by the harsher colour of the pure silver (the sterling standard was used in Sheffield plate) and the lack of visible series, and joins, which are hidden by the layer of deposited silver.

Candlesticks are among today’s most popular and collectable silver items. The earliest-surviving domestic examples date from the mid-17th century, but most found today were made from the 18th century onward. A great variety of styles is available, from the Classical column shape of the late 18th century to the inventive figural and telescopic forms of the 19th century.
Early candlesticks were cast in solid silver, but huge numbers of less expensive examples stamped from rolled silver sheet were being produced in Birmingham and Sheffield by the 1770s – these were among the first-ever items mass-produced by industrial methods. It is important to remember when buying candlesticks and candelabra that most were made as pairs.
Candlesticks Before 1800
Until the age of mass production, silver candlesticks were used mostly by the Church and the wealthy; others tended to be made of less expensive pewter. Examples made before the mid-17th century are rare. Medieval candlesticks, made largely for church altars, featured tripod feet and a pricker (metal spike) to hold the candle: sockets or sconces for the candle were not introduced until the 15th century. Candlesticks were usually made as pairs and are generally sold as such today; single candlesticksmay sometimes be worth as little as a quarter of the value of a pair.
BAROQUE AND QUEEN ANNE STYLES Silver Candlesticks
Although many candlesticks are recorded from before the 17th century, few survive; they were often melted down because they were damaged, or for conversion into coin. In particular, there are very few English candlesticks dating front before the 1650s, as much silver was melted down during the Civil War (1642-9).
In the 17th century most silver candlesticks were raised from thin, hammered sheet metal. The earliest candlesticks found on the market today, dating from the 167()s and 1680s, have stems of fluted Classical columns, or clusters of columns, and octagonal or square bases. Some rare examples have scalloped, richly embossed bases – a speciality of Dutch silversmiths. American candlesticks made before c.1760 are rare; the earliest-known pair, made in Boston, dates from 1675.
In the 1690s immigrant Huguenot silversmiths revolutionized the production of English candlesticks by casting them in solid silver rather than raising them from sheet. The base, stem, and sconce were cast separately and soldered together. The earliest pattern of cast candlesticks, •generally 15 to 18chn (6-7in) high, had a plain baluster stem with a series of knops (bulbous rings) on a square, round, or angled base. During the 17105 and 1720s octagonal and hexagonal faceted stems and bases, typical of the Queen Anne style, became fashionable. These elegant candlesticks, made in the higher-standard (”Britannia”) silver, were plain except for an engraved coat of arms at the bottom of the stem.
ROCOCO AND NEO-CLASSICAL STYLES Silver Candlesticks
The baluster shape remained the most popular design in the early and mid-18th century, but IT, the early 1730s candlesticks were slightly taller (19-23Cro/7e’2_9jlj high), with richer ornament of pleated, lobed forms on the base and stern. The influence of the Rococo style is evident in the chased shell motifs and flared, flower-like nozzles
of examples from the 17305 to the 17605. Some exceptionally fine candlesticks of this period have ornately cast and chased steins of figures holding the candle sconce above their heads. In the 1740s detachable nozzles were added to the spool-shaped sconces for saving dripping wax and for easier removal of candle stabs; some candlesticks found today have replacement nozzles because the originals were damaged or lost. Throughout this period some silversmiths specialized in the production of candlesticks; in England, the best known were the Gould and the Cafe families.
In the 1750 and 1760s simpler forms returned under the influence of the Neo-classical style. Candlesticks of this period, averaging 24 to 28.5cm (9f —I Ist) high, have plain, circular nozzles, square bases, and plain or faceted stems decorated with typically Classical gadrooning around the base, knici and sconce. By c.1765 Corinthian column
candlesticks had become fashionable, and by he 1770S and 1780s the French style of plain or fluted tapering baluster stein on a circular base, decorated with Neo-classical ornament such as reeding, beading, swags, and ram’s heads, was popular. Noted architects such as Robert Adam, James Wyatt, and Sir William Chambers also produced designs for Neo-classical candlesticks as part of their overall schemes for interior decoration.
Simple Neo-classical forms with restrained decoration were particularly v suited to new methods of manufacture. Silversmiths in the growing industrial centres of Birmingham and Sheffield used rolled sheet silver, made in flatting mills, to manufacture candlesticks on a large scale. As this silver was often of very thin gauge, the base of the candlestick was weighted, or “loaded”, with wood, pitch, or plaster of parts for stability. Mass production of loaded candlesticks in Birmingham and Sheffield increased after the opening of assay offices in those two cities in 1773; the candlesticks proved SO popular that London silversmiths often bought in provincially made pieces and overstani them with London marks. Loaded candlesticks were significantly less expensive than cast ones because much less silver was used, and they still fetch lower prices today.
SILVER TAPERSTICKS, CHAMBERSTICKS AND SNUFFERS
From the late 17th century silversmiths made taperstick, — smaller versions of candlesticks (10-13crr/4—Sin) —for holding a taper, or thin candle, with which to melt sealing wax and light tobacco pipes. Since the designs of taperstick, copy almost exactly those of candlesticks, many such pieces were probably supplied as a set, although taperstick, were usually made singly rather than as a pair. Front the irricl century the taperstick was replaced by the waxjack, featuring a central rod, around which the taper was coiled, on a circular foot.
chambersticks were used to light the way at night. Because each member of a household would need one, they were made fit large sets, but pairs were common after c.1800. They usually have a saucer-like base, decorated with reeding, beading, or gadrooning, with a central socket on a short stem, and detachable nozzles from the mid-18th century. Rare, early 17th-centUry chambersticks have long, flat handles, but ring- or scroll-shaped handles were introduced front the 1720s, with a thumb-piece and socket fora conical extinguisher. Some chambersticks also have a pierced slot under the sconce for snuffer scissors, but matching snuffer scissors and chambersticks are rarely found today.
Snuffers (scissor-like implements for trimming and collecting wicks) were an essential accessory for candles before the self-consuming wick was invented c.1800. They were produced by specialist makers. The earliest sets, from the late 17th to early 18th century, have vertical stands with faceted baluster stems and bases similar to contemporary candlesticks, sometimes with a conical extinguisher attached. Later sets have oblong or hourglass-shaped stands, like trays, with feet or handlts. Snuffer trays are sometimes sold today as pen trays.
Silver Candlesticks after 1800
By the late 18th century huge numbers of loaded sheet-silver candlesticks were being made using mechanized production in the English industrial centres of Sheffield and Buirraigham, primarily to meet demand from the newly prosperous middle classes. The Ire, mechanized techniques of rolling sheet silver, die-stamping, and die-sinking gradually began to replace laborious casting methods (although the best-quality candlesticks were still cast). Candlesticks were also among the earliest items made in Sheffield plate. As the 19th century progressed, elaborate surface ornament, in keeping with Victorian taste, and revivals of 17th- and 18th-century styles characterized the production of candlesticks. They remained popular as decorative items even after the invention of gas and oil lighting and, later, electricity.
LATE NEO-CLASSICAL CANDLESTICKS
At the end of the 18th century candlesticks of all kinds —cast, loaded sheet silver, or Sheffield plate — were made either in the Corinthian column style on a square foot, or in the plain or fluted tapering baluster form on a circular foot: both types are decorated with ornament derived from Classical architecture, such as swags, ram’s heads, vreaths, urns, and formal leaves. Thee are generally 25.5 to 31cm ( 10-12m) tall. Sheet-silver and Sheffield-plate candlesticks have Visible seaming lines where the separate sheet or plate parts have been joined. They may also have small holes in the silver (or patches Of visible copper on plate pieces), especially on areas of high relief, caused by overstretching the sheet or plate. Any die-stamped ornament should be sharply defined.
The telescopic adjustable candlestick, a speciality of Sheffield makers, was popular in the late 18th and early 19th centuries. Made in loaded sheet silver and Sheffield plate, it featured a cylindrical stem fitted with telescopic slides rising from the base. Although telescopic candlesticks occasionally appear in auctions today, most do not worl, properly; their restoration can be costly.
THE 19TH-CENTURY REVIVAL STYLES Silver Candlesticks
In the 19th century silver items were produced in an unprecedented range of historical styles, mainly as a result of developments in mechanized production, which meant that manufacturers could reproduce almost any form or type of ornament. The widespread dispersal of aristocratic collections of historic plate also provided inspiration for designers. Motifs such as trefoils and arches derived from Gothic art, while the Rococo — more ornate and bulbous than the original 18th-CCutUry version — remained one of the most popular revival styles throughout the Venture.
REGENCY AND VICTORIAN CANDLESTICKS
In the Regency period (late ISth—cariv :19th centres candlesticks became more ornate, with richer foliate and scroll decoration on the base, at the top of the stem, and around the socket. From about the 1820, and 1830, candlestick-makers concentrated on imitating 17th-and 18th-cenrur.% styles, beginning with the Rococo. Candlesticks in the Rococo Revival taste arc richly chased all over with scrolls and flowers and have undulating baluster stems, but the curves are heavier, the proportions less balanced, and the sconces more bulbous than on 18th-century originals; most were also made of loaded sheet silver, rather than cast as they would have been in the first half of the 18th century. Since mechanized manufacture resulted in less expensive products, large sets of matching candlesticks were more popular in this period than
Candlesticks in revival styles were produced in both larger and smaller versions of the originals; man, were also made as exact copies of originals to replace those that were damaged or lost, although there are although a number of fakes. Figural candlesticks were particularly popular during the 19th century, reflecting contemporary taste for novelty pieces. Subjects for figural candlesticks included caryatids, knights in armour, and rustic figures of shepherds and shepherdesses; pairs usually consist of male and female figures.
In the 1890s there was a revival of the fashion for column candlesticks, this time with stepped square bases and with inam, variations in the patterns of the borders and the capital. These are generally smaller than late 18th-centurN versions — about 14can 15′ 2111) high. Afam candlesticks in the late 19th and early 20th centuries were wired for electrical lighting as dressing-table of desklights — in such cases there mac be holes in the base for the electrical cord. During the Vogue for the Queen Anne stele in the early 20th century, sonic silversmiths produced copies of early 18th-century styles; these can be distinguished from originals by their use of sterling silver instead of the Britannia standard and by their detachable no,zlcs, which did not appear before c.1740.
With the invention of the self-consuming candle wit: in the early 19th century, snuffers became obsolete, although some were made in revival stales.
THE NEW INDUSTRIAL CENTRES
Candlesticks were among the first items mass-produced in the English cities of Birmingham and Sheffield, using newly developed mechanized methods of manufacture. With the expansion of industry in those cities in the mid-19th century, candlestick manufacture became a specialized trade. The rolling, mill, invented c.1740, enabled a silver ingot to be flattened into a sheet of uniform gauge, while the fly press, developed in the 1760, and 1770x, made accurate and repetitive piercing possil-il, Both these inventions reduced labour and manufacturing costs, since they replaced laborious hammering and hand-piercing. Decorative components were also mass-produced by die-stamping. The sheet of metal was placed oil a block with a sunken die in the form of the pattern to lie reproduced; this was struck with a hammer with a relief pattern in the sart, shape as the dic. This method was used for items in both silver and Sheffield plate, and a vast range of styles and forms was made possible by interchanging the decorative stamped components. As complete sets of dies were highly expensive, then were often used by several manufacturers, resulting in the production of identical patterns by a Nall of silversmiths. These new industrialized methods were especially well exploited by the Birmingham makers Matthew Boutton ( 1728-1809) and John Fothergill (ti. 1782), who pioneered the use of the steam-powered rolling mill in the late 18th century.

Featured on Antcollectors Silver
antique silver candlesticks
18th century silversmiths
antique silver candelabra
antique silver candle sticks
figural silver antique candlesticks
nicholas sprimont solid silver
silver candelabra made in birmingham
silver plated sauce dish with cover
16th century silverware
1700s silver trays
17th and 18th century french silver marks
17th century brass candlestick rectangle