Posts Tagged ‘armchairs’

Antiques Recently Found on Antcollectors (2)  Russian Furniture

FROM THE 18TH CENTURY, Russia had
been turning her attention to the West for cultural inspiration, and this continued in the opening decades of the 19th century. However, unlike elsewhere in Europe, the Empire style did not make inroads through the imposition of a member of Bonaparte’s family or through French control.
Napoleon’s invasion of Russia in 1812 had devastated the land, yet the period is marked by a flowering of the arts and economic recovery. Indeed, the Mikhailovsky, Winter, and Yelagin palaces were supplied with important Empire-style suites during the reign of Tsar Alexander I (1801-25).
FOREIGN INFLUENCE
Since the time of Catherine 11 (r.1762-96), furniture had been imported from Western Europe, particularly France, but also Britain and Germany. Architects, too, were brought over. By the time of Alexander I (r.1801-25), architects such as the Swiss, Thomas de Thomon, and the Italians, Carlo Rossi and Giacomo Antonio Domenico Quarenghi, were introducing the strict Neoclassical style prevalent elsewhere in Europe. They continued the work of Rastrelli, Rinaldi, and the Scot, Charles Cameron, in the urban development of St Petersburg and its outlying palaces.
They provided designs for local craftsmen, which were also taken up by local architects, such as Zacharov.
The furniture for the White Hall of the Mikhailovsky Palace was designed by Rossi and supplied by the Russian Bobkov brothers. Architectural in
detail and conception, the pieces epitomized French style and were covered in wreaths, rosettes, and other Empire motifs.
Pavlovsk Palace was rebuilt by the Russian architect, Andrei Voronikhin, after extensive damage
during the Napoleonic
wars. He was also a
consummate designer
of furniture. One particular chair –made for the Tsar’s summer residence, Tsarkoye Selo, in 1804 – is often associated with his name. It has sphinx monopodiae legs that rise, uninterrupted, into the winged arm supports. Not only does this chair demonstrate the vogue for Empire furniture and ancient Egyptian motifs, but it anticipates Biedermeier chairs, which conceal the link between the arm and the leg.

Russian furniture; England, especially the designs of Thomas Sheraton, also played an important part.
NATIVE TIMBERS
Much fine Russian furniture of this period, with its simplicity, symmetry, and love of boil clairs, is difficult to distinguish from Central European pieces. Mahogany was probably imported, but birch came from the forests near Karelia in Finland. Poplar, olive wood, and sandalwood were also fashionable, as were inlays in contrasting stones. The
marble was often Russian,
such as that from Siberia
or the famous green malachite, which could be cut into such thin veneers that it was used on curved surfaces.
METAL FURNITURE
Timber was frequently gilded and patinated to simulate metal, particularly bronze, but some furniture was also made in metal. A rich tradition of steel furniture was produced by the Arsenal at Tula, and some pieces were made entirely of gilt-bronze. Gueridons might be entirely metal, sometimes
with malachite tops and in-curved supports with eagles’ heads. One of the most lavish gilt-bronze items was the dressing table supplied to the
Mikhailovsky Palace. With a blue smalt (silica glass) table top, the piece is a riot of antique motifs, from sphinxes to cornucopiae
STYLISTICDIVERSITY
After the mid 1820s, the Neo-Gothic style became fashionable, along with a plethora of other revivalist styles,
including Rococo. Later, in the second quarter of the 19th century, furniture designers began to look back to Russia`s own traditions and folklore for
inspiration, designing pieces a la ruse. These modes were popularized by architects such as A. Staken-Schneider, and the Tour furniture shop. Typical chairs with pierced, rounded backs survive in the dining room at the Arkangelskoe, near Moscow. The design is thought to reflect traditional 17th-century Russian architecture.

GOTHIC SIDE TABLE
This Gothic-style side table is made of silver alloy and has a veined white marble top. The frieze is designed to look like a series of Gothic ogee arches: these are decorated with acanthus leaves and have a trefoil set
within each lunette. The corners of the frieze are embellished with foliate capitals set on slender quatrefoil column stems. The table stands on a rectangular base plinth decorated with an elaborate lattice of quatrefoils.
Lacquered brass decoration adds colour to an otherwise austere-looking piece. c.1820.
CENTRE TABLE
This centre table is made of birch. The circular marble top has a raised rim and reeded edge above a chamfered frieze. The table top is raised on a leaf-clasped column with three anthropomorphic legs and paw feet with sunken casters. Early 19th century.
NEOCLASSICAL CONSOLE TABLE
This Empire console table has a rectangular marble top above a richly carved frieze with a stylized rosette at each corner. Each of the four legs is a carved monopodia surmounted by a female head. Early 19th century.

MAHOGANY-FRAMED SOFA
CONSOLE DESSERT
Scroll-carved terminal
This sofa has an ornately scrolled top rail carved with anthemion motifs and downswept solid arms with scroll-carved terminals. The seat and back are upholstered and are raised on sabre front and rear legs. Early 19th century.
This gilt-bronze and brass-mounted mahogany demi-lune console dessert has an upper section with three tiers, each with pierced galleries, and a frieze with brass fluted stiles. The columnar supports are joined by a tiered platform stretcher on block feet. Early 19th rentury.
EMPIRE ARMCHAIR
This mahogany and ormolu-mounted armchair has a rectangular panelled top rail above a pierced back splat with military motifs. The chair has distinctive sphinx-head monopodia legs, and the wings of the sphinxes form the arm supports. Early
19th century. Bk
MAHOGANY ARMCHAIRS
These mahogany chairs have carved top rails and leather-upholstered seats and backs. The armrests and arm supports are formed from one sweeping curve. The tapering seat is supported on a straight seat rail. The chairs are decorated with brass inlay throughout and supported on sabre legs.

Low Countries Early 19th Century Antique Furniture

THE COUNTRY OF BELGIUM did not formally exist until 1831. Indeed, in October 1797, after the Treaty of Campo Formic, the region was annexed to France. As a result, the furniture produced there in the early 19th century scarcely differs from the French Empire style. Although the province was struggling economically, those with sufficient financial means ordered their furniture directly from Paris. After 1831, as elsewhere, a series of historical revival styles dominated Belgian furniture design.
The situation in the Netherlands was slightly different, partly because of antagonism towards the French occupation. After the Battle of Jena in 1806, Napoleon gave his brother Louis the throne of the Netherlands. As in Italy, the Empire style was introduced directly by the Emperor’s family.
INNOVATION
In 1808, the new King ordered that the 17th-century town hall of Amsterdam be refurbished as a Royal residence and had a suite of principal rooms built in the fashionable Empire style. Most of the furniture was supplied to the new French overlords by loyal Dutch craftsmen, including the talented Carel Breytspraak, the son of a German cabinet-maker, who had matriculated to the Amsterdam guild in 1795. His furniture is heavily influenced by the severe Classicism of Percier and Fontaine (see pp.200-01), but demonstrates idiosyncratic touches, such as applied mouldings around drawers or the use of typically
Dutch tapering feet. He also frequently used canted pilasters on case furniture to reduce the sense of bulk. Much of the seating supplied for the new Royal palace was upholstered by Joseph Cuel, including a scrolling day bed commissioned for the bedroom of Queen Hortense.
TRADITION
The Empire style remained popular even after Waterloo, so when King William I re-decorated the State apartments of the palace in The Hague, they were conceived in a Napoleonic style.
One of the most important suppliers to the palace was Nordanus, a local cabinet-maker. In 1818, he provided numerous mahogany pieces, some of which were veneered with floral marquetry. Local motifs, such as the fluted friezes and corner chamfering characteristic of 18th-century Neoclassical Dutch pieces, occur on much Dutch Empire furniture.
Classical features still persisted in the Low Countries into the second quarter of the 19th century and, as elsewhere in Europe, furniture was frequently made from light woods, particularly maple or burr-walnut, and was often influenced by both British furniture and the German Biedermeier style. Furniture workshops also became increasingly mechanized as the century progressed.
The Salon de Boiserie, Amsterdam Almost all of the painted panelling in this room is decorated with lavishly carved gilding. The room was designed by architects Charles Percier and Pierre Fontaine.
DUTCH DINING CHAIR
This elm dining chair has a panelled top rail of joined construction with tapering sides. The felt upholstered seat has brass studding and is raised on a plain seat rail above turned and tapering legs. Early 19th century.
BELGIAN FAUTEUILS
The top rails of these Neoclassical, laminated, black-painted armchairs are decorated in gilt with central twin putti flanking a lyre in husk-decorated borders. The downcurved arms end in gilt ball finials and are supported by gilt cornucopias headed by leaf tips. The inverted, U-shaped legs of each chair have gilt-metal leaf-tip sabots. Each chair is stamped “Chapuis”. Early 19th century.

DUTCH CARD TABLE
The folding top of this walnut table has rounded corners and sits above a rectangular panelled frieze. The table top stands on square-section, tapering legs with gilt-metal feet. The table is decorated throughout with floral marquetry typical of the Low Countries. Early 19th century.

LINEN PRESS
This mahogany and rosewood cabinet has two doors crowned by a moulded and shaped cornice with a domed pediment and central cartouche. The lower section has a bombe base with three long drawers and claw-andball feet. Early 19th century.

The front of this rectilinear 11,111o)~,,Iuy cabinet contains one dummy drawer flanked by two true drawers with a cupboard enclosed by double doors below. The corner colonettes are carved with tasselled drapery and have Egyptian -style brass mummy’s-heads and foot terminals. The case stands on short, tapering legs with toupie feet. c.1805. H:99(-,m (391n); W.,120cln (471,in); D:59crn (23in). TNH
The square, tapering legs terminate in toupie feet,
The veneers are plain and well-figured.
The doors are decorated with a brass, geometric pattern.

DUTCH CABINET
The top section of this mahogany linen press has a pediment crest above a pair of cupboard doors, which open to reveal three shelves and three aligned drawers. The lower section of the press has two short over two long drawers and is raised on rectangular feet. The linen press is relief-carved with Neoclassical motifs. Early 19th century.

19TH CENTURY CHAIRS
CHAIR DESIGN HAD NEVER been so
diverse as in this eclectic age. The different styles seen in other types of furniture also existed in chairs. Elements from the popular revival styles – from Classical acanthus
carvings to Gothic arches and all points in between – combined to create a multifarious riot of forms.
Chairs were often designed to complement other pieces in a room, but were also influenced by fashion, which resulted in the design of tow, wide seats to accommodate full skirts.
COMFORT FIRST
An emphasis on comfort was at the core of many mid 19th-century chair designs, especially those that emanated from France, where padded arms, seats, and backs were dc rigueur components of the Rococo- and Neoclassical-revival styles. In Britain, the easy chair was thickly padded in fabric or leather and
provided a respite from the more ascetic oak chairs in the Gothic style. There was a renewed interest in the designs of Chippendale, Sheraton, and Adam towards the end of the century.
Two separate interpretations of the Rococo style – the bentwood laminate styles of the Thonet and Belter factories on the one hand, and the padded giltwood offerings of French workshops on the other – both enjoyed popularity Classical motifs such as urns, acanthus, and festoons were equally prolific. Oriental and Anglo-Indian furniture expanded the canon of Western decorative arts to include elements from these two ancient Eastern cultures.
Salon suites al became popular in middle-class homes during this period. The suite typically comprised a sofa, a chaise longue. four side chairs, a lady’s armchair. a gentleman`s armchair, and a stool – all in the Louis XV style.
These open armchairs are made of white-painted wood and each have a flower-carved crest and apron. The seat, arms, and back are upholstered in a pale fabric decorated with a floral and foliate pattern. In each case, the
serpentine seat is supported on painted (formerly gilt) cabriole legs. The chairs are Louis XV in style and make an interesting contrast to the armchairs shown below. c.1880.
FRENCH OPEN ARMCHAIRS
Each one of this pair of giltwood open armchairs has an upholstered back, arms, and seat. The frame of each chair is carved with a scroll, ribbon, and swag crest and stiff lead
borders. Each chair has fluted, finial-surmounted supports and tapering legs, which terminate in brass casters. The chairs are Louis XVI in style. c1900.
GERMAN CHAIR AND ARMCHAIR
This solid mahogany chair and armchair are designed in the Empire style, with scrolled top rails and upholstered backs and seats. The supports. armrests, and seat rails are inlaid
with bronze decoration. The arm supports are giltwood sphinxes, while the cabriole legs have carved and gilt griffin heads and paw feet. c.1880.
BRITISH GENTLEMAN’S CHAIR
This walnut-framed gentleman’s easy chair has a Morocco-leather buttoned back and seat with studded decoration and outscrolled arms. It is a good example of a chair with coil springs. The chair is raised on turned front legs and casters. 1890-1900.
Carved splat panel
CHINESE ARMCHAIRS
These red-lacquered elm armchairs from Shangxi Province each have a scrolling top rail and a panelled splat carved with an animal and objects. Each panel seat with a carved seat rail is supported on square-section legs with stretchers. c.1880.
BLACK FOREST HALL CHAIRS
Each one of this pair of chairs has a stained and carved frame inlaid with hunting scenes on the back and seat. The waisted, pierced, scrolling back rises above a shaped serpentine seat, which is supported on cabriole legs.
AMERICAN SIDE CHAIRS
This pair of Rococo-revival, laminated, rosewood side chairs each has a shaped, moulded back, enclosing scrolling devices. The upholstered seats have a flower-carved rail and are supported on
cabriole legs.
BRITISH EASY CHAIR
This George III-style, mahogany, upholstered easy chair has a curved crest above rolled arms and is raised on cabriole legs with claw-and-ball feet. The chair has rose and beige silk damask upholstery. c.1900.
BRITISH OPEN ARMCHAIR
The rounded back and seat of this armchair in George I style are upholstered with gros and petit-point woolwork. The walnut frame has shepherd-crook arms and shell-carved cabriole legs, terminating in claw-and-ball feet.
ANGLO-INDIAN OPEN ARMCHAIR
This Empire-style armchair has a shaped top rail, a square-section back rail, scrolled arms, and cabriole legs. Every surface is covered with sadeli work decoration set within ivory and
ebony borders. c.1900.
ITALIAN ARMCHAIR
This lime and walnut armchair has an oval back with an upholstered panel framed by carved, gilt surrounds. The seat has a moulded top rail and is supported on cabriole legs. c.1840.
BRITISH SIDE CHAIR
The caned, shield-shaped back of this Sheraton-style, painted satinwood side chair is surmounted by a medallion, depicting a female figure. The seat is raised on square, tapering legs, which terminate in spade feet. c.1900.

antique chair “hale company”
antique chair art nouveau 1930
antique chair carved lions and legs
antique chair curved arm terms
antique chair examples
antique chair from czech
antique chair maple leaf carving
antique chair n.y. city
antique chair oak jacobean bobbin
antique chair patterns, designs
antique chair types pictures
antique chair with 18th century pattern
antique chair with a lion’s head on the back
antique chair with barley twist legs
antique chair with curved seat
antique chair with drilled holes
antique chair with flower pattern on back
antique chair with high arm one side
antique chair with horsehair
antique chair with king carvings
antique chair with lion head
antique chair with lion on the arms
antique chair with mother of pearl inlay
antique chairback settee
antique chairs carved flowers
antique chairs fish arms
antique chairs rococo style
antique chairs vienna
antique chairs with carved fish and inlay
antique chairs with lion head carved in arms
antique chais that folds over to bed

antique arm chair cabriole leg lions
antique arm chairs lion head
antique arm hall chairs
antique armchair with built in footstool
antique armchairs with faces

FURNITURE: MID 19TH CENTURY CHINA

WOODWORKING AND cabinet-making
were advanced industries in the China of the late Qing dynasty (1644-1912). Although most authorities agree that the best Chinese furniture was made before the 19th century, traditional methods and forms persisted well into this period of greater communication and trade with the West.
A PERIOD OF DISTRESS
By the mid 19th century, China was home to British, American, Russian, Japanese, German,
Italian, and French colonies. Foreign influence in China was further extended when, in the aftermath of the first Opium War (1839-42), China was compelled to open five of its ports, including Canton and Shanghai, to foreign trade. This number was increased in 1860 following another Chinese military defeat. Far from being a welcome addition to the cultural diversity of China, these foreign incursions were resented
by the majority of the populace.
More pressing matters dominated political and social landscape during this period. China was beset with internal rebellion, fat-nine, and drought – a series of calamities that conspired to wipe out 60 million people in the course of the next 12 years.
Western powers were quick to help the Qing dynasty during these periods of crisis, yet their primary aim was always to open up Chinese markets to the West to improve Western economies. Consequently, Chinese Furniture of the mid 19th century; although predominantly based on Ming and early Qing ideals, bore the
stamp of Western influence to a greater extent than ever before.
A MIX OF OLD AND NEW
The last years of the Qing dynasty, though troubled, did produce some fine furniture. A deep reverence for the past kept the traditions and monumental forms of the early Qing period in production. Concurrent with this, there was a general softening of the strict rectilinearity that had previously characterized Chinese furniture. Rounded forms, such as spoon and horseshoe backs, began to proliferate, as did peculiarly European
shapes, such as the breakfront. Continuity came in the shape of plant stands, low tables, screens, and a variety of other forms that had been popular in China for many years.
Cabinet-makers continued to use lacquer to decorate a great deal of the furniture, although the quality Ming lacquer furniture was never surpassed. Three predominant styles of lacquer decoration date from this period. The most common were daqi, a thick lacquer coating applied to a paste undercoat, and ludqi, a thin wash painted directly on to the wood. Less
common and more elaborate was miaojin, which incorporated gold-coloured highlights on a ground of black and coloured lacquer.
Another traditional decorative element, the ceramic plaque, enjoyed something of a revival towards the close of the Qing period due to the work of porcelain masters, such as Liu Xiren, who worked in Jiangxi province.
ELABORATE DECORATION
The persistent admiration for Chinese furniture was due in no small part to the quality of the exotic woods
available to craftsmen. Hardwoods, particularly rosewood, were ideally suited to the profuse pierced and carved decoration practised by so many cabinet-makers. Huali, a type of rosewood, was found to fade to an attractive golden colour after prolonged exposure to light, and furniture with this hue became known as huanghuali during the late Qing period. Hard stones, either in the form of decorative inlays or inset marble table tops, appealed to the European taste and became staples of more ornate Chinese furniture of the period.
The export market was a prime source of commissions and revenue for many cabinet-makers, particularly those in the newly opened city ports, such as Shanghai. European markets demanded that this export furniture look as Oriental as possible, with the result that decoration that might be rejected as over-exuberant by the Chinese was carried out on some furniture purely to satisfy Western buyers. Intricately inlaid figural landscapes containing pavilions and other typically Chinese features are hallmarks of this new direction Liken by Chinese craftsmen in the second half of the 19th century.

INLAID LOW TABLE
This is one of a pair of rare horseshoe armchairs made of huanghuali, the Chinese name for rosewood. It has a U-shaped, bamboo form, a carved top rail, a cane seat, and a lattice splat. The top rail and legs have been carved to simulate the apperance of bamboo. S&K
HORSESHOE ARMCHAIR
This black-lacquered wooden low table of rectangular form is inlaid with mother-of-pearl and hard stones, depicting a rural scene. The image includes a pavilion and figures within a walled garden on a black ground. The table is supported on similarly decorated cabriole legs, terminating in paw feet.
ANGLO-CHINESE CENTRE TABLE
This Anglo-Chinese centre table is made from amboyna and ebony and has three drawers one long and two short – with dummy drawers at the back. It is raised on carved ebony
trestle supports, terminating in claw feet. The supports are joined by an ebony stretcher. Although it was made in 1840, the design of the table is closer in style to examples from about 1810. c.1840.
A cane seat is fitted into the rosewood seat frame.
The turned legs simulate the appearance of bamboo.
ANGLO-CHINESE SIDEBOARD
SPOON-BACK NURSING CHAIR
This Anglo-Chinese amboyna and ebony pedestal sideboard has a frieze containing two drawers. Each pedestal contains a cupboard door enclosing shelves, as well as a deep drawer for storing wine. Made in colonial style, the shape of the sideboard is Regency. c.1840.
This Burmese, carved hardwood nursing chair features ornate, pierced, carved decoration throughout. The shaped back has a deep, carved surround with bird and foliage motifs. The padded drop-in seat has a similarly carved seat rail and is supported on cabriole legs moulded as rampant lions. c.1900.
PLANT STANDS
These intricate plant stands arc, made of rosewood and have shaped tops with polished marble insets, The tops are supported on profusely carved frames and shaped legs, which are joined by stretchers and headed by mask motifs. The stands terminate in animal-paw feet. c.1900.
NEST OF TABLES
This set of four hardwood tables graduates in size, fitting one inside the next, making the tables easy to store when not in use. Each table has a tray top and a decorative pierced apron set above shaped legs, which are joined by similarly shaped stretchers.

Easy chairs before 1840
As the Baroque movement swept through Europe during the late 17th century, the design of seat furniture became increasingly luxurious, elaborate, and more importantly comfortable. Caned and leather chairs, which until this time had sufficed, were largely abandoned in favour of richly upholstered easy chairs as stiff upright backs were discarded and were replaced by sloped and subsequently shaped backs. The number of types of chairs also increased enourmously.
ITALY AND FRANCE
It was in Italy, particularly in Venice, Florence, and Rome, during the late 17th and early 18th centuries, that the Baroque style found its clearest expression. The most elaborate open armchairs of this period are usually of either boxwood or giltwood. They are carved with scrolling acanthus, espagnolette masks, and even mythological figures emblematic of the four seasons. Some Venetian examples feature seahorses in deference to the city’s seafaring tradition. Such pieces were usually the work of trained sculptors who had turned their hand to furniture-making; the most celebrated of these was undoubtedly Andreas Brustolon (1662-1732).
In France, under the influence of Cardinal Mazarin, the court of Louis XIV (1643-1715) became increasingly hungry for foreign luxuries and fashions, especially those from Italy. In the mid-17th century French easy chairs became increasingly comfortable and elaborate, owing to their generous proportions, richly turned decoration, and lavish use of velvet upholstery from Genoa or Utrecht.
The Regence period (1715-23) saw significant developments in the design of seat furniture. Although the menuisiers (joiners) were slow to abandon the traditional Louis XIV fauteuil (armchair) form, they were increasingly lavish in their carving. Chairs were decorated with gadroons, shells, and rosettes, and even richly upholstered in velvet or lavish textiles made at the Savonnerie in Paris (est. 1604 in the Louvre for the production of textiles; from 1627 at the Savonnerie). The stretcher became more sinuous, and was abandoned by the 1720s. Further changes in form and design were
dictated by the fashion for wearing hooped dresses, introduced c.1720, which resulted in the arms of easy chairs being set back by a quarter of the length of the side-rail. The introduction of upholstery it    allowed the loose covering to be changed according to the season.
Under Louis XV (1715-74) the fashion
for placing chairs around the sides of the room was abandoned in favour of a more relaxed arrangement that encouraged intimate conversation and gave birth to the fauteuil en cabriolet, with its Rococo form and exuberant carving in the round. Louis XV seat furniture is usually made of either walnut or beech, the latter wood
always either gilded or painted; a
pegged construction was used, and pieces are very often stamped by the menuisier responsible, in accordance with the strict rules of the furniture-
makers’ guild (Corporation des Menuisiers-Ebenistes). During the 1730s numerous styles of informal easy chair emerged, all of them richly carved. The most luxurious was the bergere, which was popular throughout the 18th century and characterized by its deep seat, padded back and sides, and squab cushion. Widely copied throughout Europe, it was to prove inspirational to chair-makers during the Regency period (c.1790-1830) in Britain, and was also much copied in the late 19th and
20th centuries.
BRITAIN AND NORTH AMERICA
The earliest-recorded wing armchairs, known as bergere en confessionnal because the identity of the sitter was hidden by the side wings, are French examples from the early 1670s. Invariably of walnut, this form was rapidly adopted in Britain. The wing armchairs made during the late 17th and very early 18th centuries were usually of walnut or, in more provincial examples, of beech stained to simulate walnut. These armchairs are characterized by the exaggerated scroll of the arms, the high, slanted back flanked by high wings, and the stylized carving of scrolls and foliage on the legs and stretchers.
The most celebrated form of wing armchair was made from the early 18th century until c.1750. Examples are usually of walnut, and are
supported on cabriole legs, which, unlike their 17th-century prototypes, are rarely joined by stretchers. Wing armchairs made in Britain during the reigns of Queen Anne and George I are often carved with trailed husks and scallop shells on the top of the knees and stand on pad feet, although some later examples have hoof or claw-and-ball feet. The most refined wing armchairs of this period were upholstered in gros and petit point needlework, often with figures on the back (but never on the seat) within a flower-strewn border.
Wing armchairs continued to be made throughout the 18th century in mahogany, and were widely copied in walnut in the 19th and 20th centuries. North American early 18th-century wing chairs were generally of walnut or maple, with a high arched crest, and block and vase turned legs joined by a stretcher. During the 1720s short cabriole legs with “Spanish” feet, were used and front stretchers were eliminated. From the mid-18th century mahogany was used. Stretchers continued to be used in New England, while easy chairs made in Philadelphia generally did not have them. In 1760 the serpentine crest design was introduced, modifying the verticality, and it was used along with the rounded profile until the 1780s. Between 1780 and 1800 American chair-makers used George Hepplewhite’s design for a “Saddle Check Chair”, an easy chair with serpentine contoured wings, straight legs, and “H” stretchers, a chair design also associated with Thomas Chippendale (1718-79). There are regional differences in construction and upholstery. Maple was often used for the one-piece rear legs and stiles in New England chairs, stained to match the mahogany of the front legs.

A Library bergere or “Uxbridge” chair
This British armchair is of a style introduced in the early I8th century for use in the library. It has a cane-filled back and sides, and leather-covered cushions, the best examples have reeled or fluted front legs (early 19th century; ht 1.2ml3ft 1 lin; value 1)
Other types of late 18th-century easy chair were based on designs in The Cabinet-Maker and Upholsterer’s Drawing Book (1791-1802) by Thomas Sheraton (1751-1806) including “conversation” chairs, with deep upholstered seats and padded toprails on which the sitter, facing backward, could rest his or her arms. In Sheraton’s The Cabinet Dictionary (1803) there is a reference to a “curricle” chair, so-called after a tub-shaped carriage, which was popular in libraries at the time. About 1810 to 1820 bergere-type armchairs with deep, upholstered or leather seats and backs, and cane or upholstered sides, were also widely used in libraries.
SCANDINAVIA
Trade between England and Scandinavia was well established by  the mid-17th century, and some English furniture had been exported to Scandinavia by the end of the century. Craftsmen in these countries produced good copies of English furniture; the joiners (although not the cabinet-makers) were very conservative, with the result that early 18th-century styles continued to be produced until c.1800. Around this time, too, mahogany was introduced; before this, walnut was used for expensive pieces. More commonly employed, however, were native light-coloured woods such as birch, ash, and pine; these were left bare, stained, or painted in colours.
By the late 1730s French designs had become increasingly popular at the Swedish and Danish courts and also with the upper classes in these countries; the middle classes did not generally adopt the new fashions until the end of the century. French styles were particularly influential in Sweden, and from the Rococo period court architects were trained in Paris. One of the most influential Swedish designers of the period was Jean Eric Rehn (1717-93). Danish court architects learned their trade in Germany, but this situation changed after the reign of Louis XVI, when both countries adopted the French Neo-
classical style. In Sweden the cabinetmaker Georg Haupt (1741-84), who had trained in both Paris and London is well known for his work in the Louis XVI style. This style developed into the Neo-classical Gustavian style during the I 770S.

AMERICAN “CHIPPENDALE”
The carvers of the most elaborate American Rococo furniture were immigrants from England, Scotland, and Ireland, who had served their apprenticeship in London before going to North America. The first of them arrived in the 1740s, but the great wave of craftsmen tsmen was in the 1760s. Philadelphia was the city most hospitable to immigrants, and more Rococo furniture was produced there than in other colonies. The major cities in America developed distinctive furniture styles, due to the taste of the gentry, the mix of native born and immigrant craftsmen, and the availability of imported
furniture and English pattern books. It is known that there were copies of Chippendale’s Director in Philadelphia. The Library Company of Philadelphia acquired a copy between 1764 and 1769, and two cabinet-makers Thomas Affleck (1740-95) and Benjamin Randolph, owned copies. In America furniture was mostly made of solid pieces of primary wood, rather than veneers over a seconday wood carcase as in England.

RUSSIA
Throughout the 18th century Russian furniture was inspired by French and to a lesser degree English designs; by c.1815 German influence is also apparent. Generally the timbers used for Russian furniture were indigenous; during the early 18th century, when designs were dictated by early Georgian furniture from Britain, they included oak, beech, and walnut. By the 1720s Russian armchairs had tall curved backs with a vase splat and cabriole legs. By the mid-18th century, the taste for Rococo and Chinese ornament had spread to Russia due to the publication of such influential pattern-books as The Gentleman and Cabinet-Maker’s Director (1754-62) by the English cabinet-maker Thomas Chippendale (1718-79). English-style chairs with pierced splats and sweeping cabriole legs with claw-and-ball feet, usually made in mahogany, were increasingly popular.
However, from the beginning of the 19th century the clearest influence on Russian furniture manufacture was that of France. Particularly favoured was the Empire style of the cabinet-maker Georges Jacob (1739-1814), who was based in Paris. About this time, light-coloured woods also became popular, anticipating the Biedermeier style in Germany and Scandinavia. From c.1815 chairs were executed in indigenous woods such as Karelian birch, maple, and poplar, decorated with restrained stringing.
HALL CHAIRS
Hall chairs (and also hall benches) were introduced in Britain from the late 17th century. They may have been inspired by similar chairs known as sgabelli, which were popular in the great Italian palaces during the 16th century. Hall chairs were designed to be placed in the entrance hall or passageways used by servants and tradesmen waiting to be called into one of the main rooms. Consequently such chairs were never upholstered, and generally they lacked arms; however, they were increasingly made of mahogany, with solid backs and dished or shaped scats. The designs were bold and simple and were frequently embellished with the painted crest or coat of arms of the family who commissioned them. In some cases they were carved with motifs intended to impress guests and to emphasize the social status of the owner. The importance given to hall chairs is suggested by the fact that there are six designs for such chairs in The Gentleman and Cabinet-Maker’s Director by Thomas Chippendale, three in The Cabinet-Maker and Upholsterer’s Guide (1788-94) by George Hepplewhite (d.1786), and two in The Cabinet Dictionary (1803) by Thomas Sheraton (1751-1806).

THE BIEDERMEIER STYLE
This decorative style was popular in Germany, Austria, and Scandinavia between c.1815 and c.1848. The name was invented by two German poets who wrote under the pseudonym Gottlieb Biedermeier, formed from a combination of bieder (meaning conventional or honest) and Meier, a common German surname. The solid, comfortable appearance of Biedermeier pieces was thought to mirror the unpretentious elegance of the German bourgeoisie. The simple, geometic designs, which eschewed ornate decoration, were inspired by French furniture of the Empire period. Function and comfort were of supreme importance to the Biedermeier craftsmen and to achieve this end they used coil-spring upholstery.

•    UPHOLSTERY gros and petit point arc very rare and greatly contribute to the value of a wing armchair
•    REGILDING well-executed regilding should not dramatically affect the value of an object; French Louis XV beechwood chairs were usually originally gilded or painted and traces are often found in the crevices
•    HALL CHAIRS these arc usually found in sets of four or more, although it is possible to find single chairs; they are often decorated on the back with a cartouche featuring the armorial of the family who commissioned them; they are generally very good value for money
•    COPIES AND FAKES Brustolon-style chairs were widely copied in the 19th century; Biedermeier chairs have been been widely faked in the 20th century, with many side chairs converted into armchairs – this should be obvious if the proportions seem wrong

Early chairs
Before the 16th century rooms were sparsely furnished, and the range of furniture was limited. Chairs were scarce and, like stools, were viewed as symbols of authority. It was not until the 16th century that more comfortable chairs were made. At this time the major artistic impetus spread northward from Italy, and chairs were made in quantity only in southern Europe. By the I7th century, as lifestyles became more settled, there was a greater demand for comfort in seat furniture.

A Turner’s or “thrown” chair
s of this type were produced in Britain from the 16th century, and
still made in provincial areas into the 19th century. “Throwing” was early term for turning. These chairs were often made from ash, which strong and ideal for turning, although susceptible to woodworm. late 17th century; ht Iml3ft3in; value H)
SOUTHERN EUROPE
The earliest prototype was the 16th-century Italian X-frame folding chair, usually in walnut, Inch was adopted in northern Europe from the end of the century. Spanish examples exist that are inlaid with ivory and metals in stellar and geometric designs in the Moorish fashion.
Armchairs of the 16th and 17th centuries were refined versions of the carved chaise caquetoire (gossiping chair) which, with its solid, carved back and trapezoidal seat, was not very comfortable. As revealed by the engravings of the Flemish designer Hans Vredeman de Vries (1526-(.1604) in his Differents Pourtraicts de Menuiserie ((.1585), the earliest-surviving traditional easy chairs were executed principally in Tuscany, Spain, Portugal, and The Netherlands in the late 16th and early 17th centuries. Known as the sillon De fraileros (”monk’s chair”) in Spain, this type of chair was usually of walnut, with scrolled and acanthus-carved stiles. The upper section Was supported by plain legs joined by waved stretchers, and the chair was upholstered with
intricately tooled and embossed leather stretched by ornamental heavy brass nails. Examples from The Netherlands often have lion finials surmounting the stiles.
NORTHERN EUROPE
Turning on a foot-operated lathe (which revolved the legs while the wood was cut to the required shape) became an increasingly popular decorative technique in northern Europe, and by the early 17th century most legs were turned. This form of decoration remained fashionable until the end of the century. Designs became increasingly intricate at this time, culminating in the “barley-sugar” (spiral) twist.
Peculiar to the 17th century is the oak joined chair with arms, often called a wainscot chair in Britain. Similar designs were made in many countries throughout northern Europe, and examples are still found in some numbers. This type of chair commonly has a scroll-carved toprail, sometimes inscribed with initials or a date. Its characteristic feature is a panel back, often symmetrically carved with stylized
leaves, lozenges, roundels, and lunettes. The seat
is solid, but would originally have had a squab cushion, and the front supports are ring-turned, with the legs joined by stretchers. Chairs of this type were made until the end of the 17th century and represent the final stage of the age of the joiner, as this period is often called. Designs and techniques changed considerably after this time, but in many provincial areas the traditional methods of construction continued to be used.

•    woods invariably indigenous – walnut in southern Europe and oak in northern Europe; rosewood was used to a limited extent during the 17th century in Portugal
•    DAMAGE examples that pre-date 1600 are extremely rare, and 17th-century examples should be examined closely for repairs; age, wear, and tear will have taken their toll – the legs and the lower part of the back are particularly vulnerable
•    DECORATION painted decoration, upholstery, leather, and caning have often been changed; if the originals remain, they increase the value
•    COPIES AND FAKES most 17th-century chairs are stylistically of a very simple form, the same designs being produced over a long period, making them difficult to date; turners’ chairs arc popular with collectors and are often faked – copies are difficult to detect as they may be quite old themselves, and tend to be in the same woods as the originals (ash or oak, not walnut), with good-quality carving; the colour of the wood on all unpolished surfaces should be closely examined, as should the overall patina

Seat furniture
Until the 17th century most seating was provided by the stool; box-settles were also common in wealthier households. Side chairs and armchairs were introduced in the 16th century and the settee in the mid-17th century; this evolved over the next 200 years into the fully upholstered sofa. The demand for comfortable seating increased throughout this period, with upholstery gradually
eclipsing wood carving and decoration, especially after the introduction of the coiled spring in the 1820s. Over the centuries seating has been profoundly influenced by a succession of styles and forms, from the extravagant Baroque to the austere Neoclassical, all of which have been revived by later generations of craftsmen. The interest in historical design continues to this day.
Stools
The stool has been in use for thousands of years, and was and is common in one form or another to all civilizations. Its often simple construction and its portability have ensured its lasting popularity. Until the 17th century, seat furniture with backs and arms was scarce, and the chair was reserved for the head of the household; most seating was provided by the stool.
17TH-CENTURY JOINED STOOLS
Inventories from the 17th century show that stools existed in large numbers and were reserved for members of the household who had sufficient status to sit at formal occasions. This hierarchy persisted in court circles well into the 18th century. Most stools found today were made from the 17th century onwards. As with all types of furniture, examples of stools before 1600 are rare and those that come onto the market can be valuable. The simple, pegged, oak stool with carved decoration is probably the most common type. Called a joined or joint stool, it was made by a joiner, with mortise-and-tenon joints secured by pegs. Although regional variations exist, the design was basically the same throughout Europe. Generally only those pieces that were well made in good-quality wood have survived, and many stools intended for everyday use have long since disappeared.
Joined stools could be extended in length to become benches and were occasionally made with a small drawer underneath the seat. Even at this early date they were often made in sets, a practice that was to become widespread in later centuries. Originally the seat would probably have been softened with a squab cushion but during the 17th century padding became an integral part of the stool as the demand for comfort increased.

LATER STOOLS Because stools were perennially popular they tended to keep up with fashion trends. In the late 18th century British stools were made after designs in The Cabinet-Maker and Upholsterer’s Guide ( 1788-94) by George Hepplewhite (d.1786) and French stools after designs by Pierre Fontaine (c.1762-1853) and Charles Percier (1764-1838), as well as those in Receuil de decorations interieures (1801-12). Shapes diversified as the interest in historical styles and forms, whether real or imaginary, took hold. For example, the X-frame form, first made in ancient Egypt and common in Europe during the Renaissance, was revived in Europe and North America during the early 19th century.
The 19th century saw an increased use of mechanization, which enabled carving to become extremely elaborate, and stools were made in a variety of bizarre forms with carved and moulded decoration. From the third quarter of the 19th century a new type of upholstered seating, the pouffe, was introduced. The upholsterer played an increasingly prominent role in furniture-making as comfort became an ever more important criterion.

•   COPIES OF JOINED STOOLS during the 1920s and 1930s
many copies were made of the joined stool; signs of a genuine example include wear in the right places, such as the stretchers; irregular pegs that stand proud due to shrinkage and are visible on both the inside and outside of the frame; “dry” wood underneath the seat
•   GEORGIAN STOOLS look at the colour of the wood under the seat rail (the drop-in seat should lift out) – this should be “dry” and unstained; exercise caution with small stools, which are popular with collectors – fakers may have used the front pair of legs from two damaged chairs and fixed them into a seat rail; check for odd proportions and for tops of legs hidden by the seat rail