Posts Tagged ‘Art’

Dishes
Pair of George III oval meat dishes by Frederick Kandler, London, 1765, 73 oz 2 dwt Pair of Victorian octagonal entree dishes and covers with
vegetable dividers for each and ball finials, Sheffield, 1880,
120 oz 14 dwt 450 0
George III circular vegetable dish with ivory grips, pierced sides and four scroll and foliate feet, by W.S., London, 1809, 80 oz 2 dwt 360 0
William IV shaped oblong entree dish and cover with engraved armorials and foliate ring handle, by J. C. Eddington, London, 1835, 61 oz 5 dwt 260 0
George III muffin dish and cover, the domed cover with urn
shaped finial, by Henry Chawner, London, 1791, 15 oz 1 dwt        210 0
Jugs—Cream and Milk
George III helmet-shaped cream jug with ‘bright-cut’ engraving, loop handle and square pedestal foot, by George Smith, London, 1790, 3 oz 7 dwt 80 0
George II cream jug of conch shell type with serpent handle and
three coral-like supports. Circa 1755, 3 oz 5 dwt 80 0
George III oblong milk jug engraved with crests and with gadroon lip and scroll handle, by R. and S. Hennell, London, 1808, 6 oz 2 dwt 70 0
Victorian baluster milk jug chased with flowers and scrolls and on three feet. Possibly by William Brawn, London, 1845, 5 oz 7 dwt 52 0
Jugs—Water
George III pear-shaped hot-water jug, stand and lamp, the jug with rams’ masks and laurel festoons, the stand on three claw feet with female bust terminals, by Andrew Fogelberg. The jug 1776, the stand 1775, 40 oz

780 0
George III vase-shaped hot-water jug, plain with wood handle and on circular foot, by William Fountain, London, 1801, 25 oz 11 dwt 460 0
George II baluster hot-water jug chased with scrolls, leaves and flowers, raffia-covered handle and rim foot, by Gurney and Cook, London, 1755, 19 oz 15 dwt 270 0
Jugs—Wine and Ale
Queen Anne ale jug, die ground embossed with foliage and flowers and a satyr spout, by John Wisdom, London, 1712, 35 oz 280 0
Victorian wine ewer with baluster body and engraved with Grecian figures and leaves, entwined snake handle and butterfly finial, by E. and J. Barnard, London, 1862, 27 oz 11 dwt        170 0
Marrow Scoops
Queen Anne scoop of typical form by Charles Jackson, 1713,
1 oz 10 dwt 68 0
Early George III scoop, the larger bowl engraved with initials,
probably by William Tuite, London, 1767, 1 oz 12 dwt 20 0
Mustard Pots
George III drum mustard with moulded borders, flat hinged lid and simple scroll handle, with spoon of earlier date. Pot by Ernes and Barnard, London, 1813, 5 oz 10 dwt 165 0
some auction room prices : 1968-69
William IV mustard with ribbed baluster body and hinged domed lid with floral finial, scroll handle and shell thumbpiece and spoon of same date but different maker. Pot by C.G., London, 1830, 6 oz 17 dwt
George III oblong mustard with domed cover, urn finial and angular handle on four bun feet, London, 1813, 3 oz 11 dwt
Salts
Four George I plain oval trencher salts with incurved sides, by
Mary Rood, 1723, 6 oz 15 dwt Pair of George III boat-shaped salts, reeded at the lips and
pedestal feet, gilt interiors, by Peter and Ann Bateman, 1792,
4 oz 6 dwt
Pair of George II compressed circular salts, with plain engraved bodies below gadroon lips each on three shell-headed hoof supports, possibly by Isaac Cookson, Newcastle, 1747, 8 oz 1 dwt
Salvers
George II large circular salver on four lions’ mask and shell bracket feet, the shaped border pierced and chased, by George Wickes, 1744, 137 oz
George I plain circular salver on central foot with moulded border, by W.P., 1720, 13 oz 12 dwt
George III circular salver, engraved with initials, chased wave border and gadroon rim, on three claw and ball feet, by Robert Rcw or Rugg, 1766, 24 oz 3 dwt
Victorian salver engraved in the centre with an initial and also with scrolls and foliage, moulded border, by J. and J. Angell, London, 1845, 25 oz 14 dwt
Sauceboats
Pair of George II plain sauceboats each on three shell and scroll feet with gadrooned rims and double scroll handles, by Peter Archambo and Peter Meure, 1754, 29 oz
George II two-handled plain double-lipped sauceboat on collet foot, with double scroll handles and waved rim, with a moulded drop beneath the spout, by Peter Archambo, 1732, 17 oz 5 dwt
Pair of George III sauceboats, each on fluted shaped lozenge foot, with gadrooned borders and double scroll handles, by William Sampcl, 1766, 25 oz
Snuff Boxes—See Small Decorative Antiques Sugar Basins—See Baskets—Sugar Tapersticks—See Candlesticks Tankards
William and Mary tankard on three lion couchant feet, scroll handle, cylindrical body and moulded base, by Robert Cooper, 1692, 31 oz
George II baluster tankard with domed cover, openwork thumb-piece and double-scroll handle, on moulded spreading foot, by William Grundy, 1755, 34 oz 5 dwt 650 0
George III baluster tankard, with domed moulded cover and heart-shaped lower terminal to the scrolling handle, by William Caldecott or Gripps, 1765, 27 oz 15 dwt 570 0
Tea Caddies
George III oval caddy, the body with two bands of bright-cut engraving in beaded borders and the plain hinged lid with urn finial, by Hester Bateman, 1781, 14 oz 10 dwt 900 0
George III shaped oval caddy, the body fluted at intervals, decorated with bright-cut engraving, hinged domed cover with wood finial, by Robert Hennell, 1787, 14 oz 17 dwt 480 0
Teapots and Stands
George II bullet teapot with engraved shoulder decoration of satyr masks, leaves and flowers, straight spout, loose lid, ivory handle and finial, by Isaac Liger, 1729, 15 oz 1 dwt 2,100 0
George III teapot stand on four fluted panel supports, by Hester
Bateman, 1789, 4 oz 15 dwt 280 0
George III oval teapot with moulded girdles and a matching stand, supported on four feet, by Crespin Fuller, London, 1800, 16 oz 15 dwt 270 0
George III oval, semi-lobed teapot, with swan-neck spout, ivory handle and finial, by P. A. and W. Bateman, 1799, 17 oz 3 dwt 170 0
George IV teapot, compressed circular body, ivory handle and
finial, curved spout, by Eley and Fearn, 1823, 25 oz 16 dwt        150 0
William IV compressed circular teapot with moulded girdle, wood finial and similar wood handle, by E. E. J. and W. Barnard, 1830, 14 oz 2 dwt 135 0
Early Victorian bullet-shaped teapot with engraved body, Edinburgh, 1840, 24 oz 82 0
George III oval teapot stand, gadroon border on four panel
supports, but George Fenwick, Edinburgh, 1806, 5 oz 14 dwt 80 0
William IV small melon-shaped teapot, with slightly domed cover and ivory finial, scroll handle and curved spout, London, 1833, 13 oz 18 dwt 60 0
Tea and Coffee Services
Victorian tea and coffee service of compressed circular form, decorated with embossed flowers and foliate handles and on scrolled feet with shell motifs, by Rawlins and Sumner, London, 1838, 72 oz 600 0
George IV three-piece melon-shaped tea service with scroll handles and shell decorated panel supports, by E. E. J. and W. Barnard, London, 1829, 44 oz 7 dwt 500 0
George III circular three-piece tea service with curved lobes, gadroon rims and leaf decorated handles, on paw supports, the pot with rose finial, by John Angell, 1819, 41 oz 6 dwt 380 0
Victorian three-piece tea service of compressed circular form,
the plain ground richly chased, by I. J. Keith, London, 1840, 48 oz
Vinaigrettes—See Small Decorative Antiques Waiters
Pair of George III plain oval waiters each on four shell and beaded bracket feet, beaded rims, by John Scofield, London, 1777, 27 oz
George II plain shaped square waiter on four hoof feet, moulded border, by Thomas Farren, London, 1734, 6 oz 17 dwt
Early George II square waiter with raised border incurved at the angles, 1727, 3 oz 18 dwt
SHEFFIELD PLATE Candelabra and Candlesticks
Pair of candelabra, each for three lights, with reeded scrolling arms, gadroon bordered knops, detachable nozzles and circular bases, 17i in high to centres
Pair of three-light candelabra, the tapering vase stems, circular bases and campana-shaped sconces decorated with chased borders, each fitted with two detachable scrolling branches, one converting to form a

five-light and bearing flame finial, 20 in high
Pair of table candlesticks with V-shaped stems, gadroon shoulders, circular bases and detachable nozzles, llj in high
Pair of table candlesticks with circular bases, vase-shaped stems and gadroon borders, detachable nozzles, 11 in high
Coffee Pots
Vase-shaped coffee pot on pedestal foot with reeded borders, ball finial and wood handle, 13 in high
An oval coffee pot on pedestal base, with reeded shoulder, gadroon borders and angular wood handle, 9] in high
Urn-shaped coffee pot, body semi-lobed between ribbed panels, on pedestal base, ball finial and wood handle, 27 in high
Coasters—Wine
Four circular wine coasters with lobed sides below gadroon lips, the wood bases centred by crested bosses, 5J in diameter
Pair of circular coasters with beaded and ovolo rims, wood bases, 6 in diameter
Caddies—Tea
Two caddies of bombd form embossed with shell motifs Serpentined caddy with hinged lid and beaded borders
Dishes
Set of four entree dishes and covers on heater bases, oblong with scrolling foliate borders, 14 in wide over handles
Pair of entree dishes and covers with gadroon borders and
detachable foliate handles, 11 in wide 22 0
A rectangular entree dish and cover complete with liner, gadroon and leaf borders, wood end handles, on four supports, 141 in wide 20 0
Teapots
An oblong teapot, body semi-Iobed between gadrooned borders, short spout, ivory finial and angular wooden handles, 5J in high 25 0
A compressed circular teapot engraved with swirling leafage,
fruit finial and scroll handle, 5J in high 18 0
Tea and Coffee Services
Oval three-piece coffee service with vase-shaped pot, oval jug and basin decorated with bands of sprays and foliage, 10 in high the pot 160 0
Three-piece tea set with compressed circular bodies, fluted,
foliate collars, scroll handles and foliate panel supports 38 0
Tea Trays
Oblong two-handled tray, engraved with armorials within a chased surround of scrolls and floral sprays, gadroon border, 30 in wide 220 0
An oblong tray, gadroon bordered and reeded end handles
springing from chased foliage, 28 in wide 95 0
Tea Urns
An inverted compressed pear-shaped urn, the body engraved
with a crest, foliate handles and flower finial, 16 in high 75 0
An oviform urn with an applied plain shield, the cover with vase finial, reeded loop handles, on square base with ball feet, 221 in high 45 0
Tureens
Large shaped oval sauce tureen on four feet below heavily
chased floral motifs, detachable liner, 16J in wide 230 0
Pair of oval sauce tureens and domed covers with gadrooned rims, decorated with acorns and oak leaves at the handles, 8Ј in wide (end handles missing from one tureen) 120 0
Wine Coolers
Set of four coolers, the campana-shaped bodies engraved with contemporary armorials above lobing reeded handles and gadroon borders, on pedestal bases, 9i in high 520 0
Pair of coolers with campana-shaped bodies, reeded handles and
on pedestal bases, 9J in high 200 0
NON-PRECIOUS METALS
Brass
Pair of eighteenth-century andirons, with spherical finials, and
masks, 29 in high 100 0
SOME AUCTION ROOM PRICES ! 1968-69
A club fender
A Corinthian column floor standard
An embossed fire kerb
A two-handled log tub on paw feet
An alms dish with lobed centre and inscription border, the rim
with punched rosettes, 15} in diameter Pair of spirally-turned candlesticks on domed feet, 20J in high A hanging oil lamp Pair of chambersticks, with snuffers A heavy log tub with lion mask handles on paw feet Brass

and steel semi-circular fender
An oval fire insurance plate with a crest of a stag, dated 1774 Pair of carriage lamps A helmet coal-scuttle
A warming-pan with turned wood handle Pair of baluster candlesticks, 9 in high
Bronze
Figure of a racehorse and jockey after Isadore Bonhcur, I0j in
high
The Capture of Alexander by G. Halse. Two warriors hold a
struggling youth. Signed and dated 1860, 24 in high Eighteenth-century Italian figure The Dying Gladiator signed
Canova
Figure of a dancing fawn, holding up a bunch of grapes and
balanced on his left foot, 14 in high Figure of an infant satyr playing a set of pipes, 9j in high Pair of busts of Henry IV and Sully, three-quarter length, both
wearing ruffs and decorations, on rouge marble socles, 20} in
high
Pair of Art Nouveau winged figures stamped A. Moreau, 9J in
high
Pair of five-light candelabra on bulbous stems Italian figure of Venus, 7 in high
Copper
Early nineteenth-century tea urn on a square base
A street lamp
Three large saucepans (one with lid) Two coal scuttles A large kettle
Coal helmet with swing handle
Large two-handled urn and cover
A copper and brass tea urn with tap
A long turned wooden-handled warming-pan
Iron and Steel
Steel and brass basket grate with pierced frieze and baluster
uprights, 20 in wide Seventeenth-century Sussex wrought-iron fireback, 2 ft 10 in
by 1 ft 8 in and a log fork Wrought-iron shaped fire-back Regency iron and brass stick stand on paw feet
Victorian cast-iron corner stick stand 5 10
Victorian cast-iron oil heater 3 10
Pewter
A charger with secondary touch of Thomas Lanyon, circa 1730,
20 in diameter 36 0
Five quart tankards 35 0
A four-branch candelabrum, 24 in high 22 0
Eighteenth-century circular charger, 20 in diameter 22 0 Pair of altar candlesticks, baluster-shaped stems on triangular
bases, 20 in high 16 0
Pair of baluster and cup candlesticks, 18 in high 15 0
A hot-water meat dish with two handles and a grill, 22 in wide 15 0
A travelling chamber-pot, stamped Jas. Dixon 14 0
Two tankards and a mug 6 0

Globes
Pair of early nineteenth-century mahogany library globes by Newton, published in 1838 and 1836. The tripod frames with out-scrolled legs ending in brass castors, 3 ft 8 in high        780 0
Large pair of terrestrial and celestial globes by Newton; published 25 March 1875. Supported in mahogany frames on triple curving legs 205 0
Pair of terrestrial and celestial globes in turned stands by James
Wyld, Charing Cross East; published 1847 185 0
Knife Boxes
A pair of mahogany urn-shaped knife boxes, stamped W. Johnston, with domed lids and bodies inlaid with flowers and stripes, 2 ft 5 in high 115 0
Sheraton  inlaid  mahogany serpentine-fronted knife box in
original condition 32 0
Mirrors—Mantel
Empire-style giltwood overmantel with triple mirrored panels
and decorated with classical figures 105 0
Rectangular mantel mirror in a giltwood frame carved with
acanthus and shell motifs, 31 in by 25 in 60 0
Mirrors—Toilet or Dressing
Sheraton serpentine-fronted box-frame toilet mirror fitted with
two drawers, 17 in wide 36 0
Sheraton box-frame shield-shape toilet mirror with two drawers,
18 in wide 30 0
Mahogany box-frame toilet mirror with three drawers, 15 in
wide 15 0
Edwardian   mahogany   box-frame   toilet  mirror   with three
drawers to base, 22 in wide 9 0
Mirrors—Wall
Pair of Chinese-Chippendale giltwood girandoles of rococo outline mounted with phoenix-birds and clusters of flowers from which issue two scrolled candle branches. The base enriched with acorns and oak leaves, 38

in high 650 0
Mid-Georgian wall glass in a giltwood frame carved with scrolls
and foliage and pierced, 44 in high 200 0
Chippendale mahogany mirror with gilt gesso beading
George IV convex mirror in a gilt frame enriched with spherical ornament with two scrolled candle sconces. Crested with a gilt eagle with outspread wings 76 0
Regency giltwood convex mirror with ball encrusted moulded
frame and ebonised slip, 1 ft 11 in diameter 15 0
Settees, Couches and Chaise Longues
Small carved mahogany sofa, the arched back carved with
rococo motifs. Curved arms, carved seat rail and cabriole legs        135 0
some auction room prices ‘. 1968-69
Decorated satinwood cane-panelled settee with loose seat
cushion, 4 ft 4 in George III painted settee with flat rectangular back and arms,
on turned legs. The arms, seat rails and legs are painted
with husks and flowers on a cream ground, 6 ft wide Early George III mahogany settee with stuffed back and arms.
The seat rail and legs are carved with blind fret, 5 ft 8 in
wide, (some restoration) Victorian rosewood frame serpentine-fronted chaise longue on
short cabriole legs
Settles
Eighteenth-century oak settle, 5 ft 5 in wide Seventeenth-century panelled oak settle with box seat, 4 ft 6 in wide
Seventeenth-century carved and panelled tall-back hall settle, 5 ft 7 in wide
Sideboards
Small nineteenth-century sideboard inlaid with ebony lines. Raised back, the centre drawer flanked by a cupboard and deep drawer. Supported on six turned and tapering legs, 4 ft 8 in wide
Hepplewhite-style mahogany serpentine sideboard of rich mellow colour, cross-banded in kingwood and fitted with a napery drawer and cellaret cupboards with octagonal gilt metal handles and supported on chamfered

legs, 7 ft 2 in wide
Georgian mahogany half-moon sideboard with two cupboards to the sides and two drawers with lion ring handles in the centre. Four tapering legs, 4 ft wide
Large mahogany Sheraton-style sideboard fitted with two long drawers and flanked by two deep drawers, supported on tapering legs
Regency Empire mahogany sideboard of architectural form, with a reverse breakfront with two shallow drawers to the centre flanked by deep cupboards. Supported by two curved and four simulated bamboo legs

terminating in brass paw feet. The whole mounted with ormolu and brass griffins, lions’ masks and sphinx and with Adams-style garlands and patera, 7 ft 6 in long
Late Georgian mahogany sideboard with shaped front, the top back rail fitted with three tambour slides. Two cupboards and a centre drawer to the base over a waved apron. Supported on six slender tapering legs, 5 ft

7 in wide
Early nineteenth-century mahogany bow-front sideboard on spiral-turned legs, 6 ft 1 in wide
Tables—Break fast
Regency mahogany breakfast table with brass stringing on the banded top and a turned pillar ending in a reeded quadruped, 5 ft by 3 ft 5 in
Georgian mahogany oval breakfast table with reeded edge and
Tables—Card
Chippendale mahogany card table with shaped folding top on boldly carved cabriole legs ending in claw and ball feet, 2 ft 7 in wide 370 0
Late George II mahogany card table with border of carved flowerheads and legs and frieze carved with blind fret, 3 ft wide 250 0
Regency card table in figured rosewood inlaid with brass flowers and leaves, the D-top on a ringed stem and quadruple brass capped legs, 3 ft wide 190 0
Sheraton mahogany card table inlaid with satinwood lines and
on tapering legs, 3 ft 2 in wide 180 0
George II walnut card table with rectangular top on turned legs
with mantled knees and club feet, 3 ft wide 95 0
Regency mahogany card table with green baize interior on curving quadruple support, ending in brass claw feet. The top is cross-banded 65 0
Victorian mahogany card table with double Sap top supported
on four tapering shafts, terminating in curved legs 44 0
Tables—Centre
Regency painted centre tabic, the circular top simulating green marble, the border with brass mouldings hinged to a carved turned central support on a curved triangular base with lion’s paw feet, 4 ft diameter 120 0
Edwards and Roberts eboniscd centre table with ormolu beading on cluster column and quadruple base, 5 ft 6 in wide 38 0
Red Buhl shaped centre table with heavy ormolu mounts, two
drawers and on cabriole legs. (Poor condition) 11 0
Tables—Dining
Charles I oak dining table with a triple-plank top and the frieze carved with leaves and interlaced arcading, on column legs, 6 ft 5 in long by 2 ft 7 in wide 360 0
Large late George III mahogany dining table, the top richly carved with acanthus, ribbon motifs, satyr masks and a coat of arms. Supported on ten tapering spiral-twist legs with five loose leaves, 12 ft 4 in long 185 0
Georgian mahogany two pillar dining table with triple curving
legs ending in brass-capped feet 122 0
Georgian mahogany oval drop-leaf dining table on turned legs
and pad feet 75 0
Eighteenth-century mahogany oval drop-leaf cottage dining table
on taper legs with pad feet, 3 ft 6 in wide 44 0
Mahogany gadrooned oval dining table with cabriole legs and
claw and ball feet 40 0
Georgian mahogany drum library table with leather top and four real and four dummy drawers. On triple curving legs with brass-capped feet, 3 ft 3 in diameter 680 0
some auction room prices : 1968-69
George III mahogany library table fitted with seven drawers and dummy drawers with gilt metal lion ring handles, the top with gilt tooled green leather and the whole raised on a curved quadruple support with

brass-capped feet
Tables—Games and Sewing
Eighteenth-century mahogany, shaped folding top, games table on nutcracker frame with cabriole legs and claw and ball feet, 34 in wide
William IV games table with sliding and reversible top inlaid as a chess board opening to reveal a backgammon board with two drawers to the side. Central pillar supported on quadruple curving feet
Nineteenth-century mahogany sewing table with rising top and drawers below. The slender tapering legs ending in brass-capped feet
Tables—Gate-leg
George I elmwood gate-leg table, the oval top with flaps on
cabriole legs carved with scrolls and leaves and ending in
pointed pad feet, 3 ft 9 in wide Seventeenth-century oak oval gate-leg dining table with double
flaps supported on bobbin turned legs with plain cross
stretchers, 4 ft 9 in wide Late George II mahogany gate-leg table, the oval top with two
flaps, on unusual legs fluted and ending in paw feet, 3 ft 9 in
wide
Oak oval gate-leg table on turned underframe with drawer, 4 ft wide
Tables—Occasional
Late George II mahogany piecrust table with bird-cage support on fluted stem with carved legs and claw and ball feet, 2 ft 2 in diameter
Large mahogany piecrust tripod table with baluster stem and
pointed pad feet, 3 ft 5 in diameter Mahogany tripod table, the circular top with raised rim, on
cabriole feet, 1 ft 10 in diameter
Tables—Pembroke
Late Georgian mahogany oval Pembroke table with drawer, on
square tapering legs, 2 ft 7 in wide by 3 ft 6 in long Late Georgian mahogany Pembroke table painted with a floral
border and on turned and fluted legs Georgian mahogany Pembroke table with folding flaps and
single drawer, inlaid with satinwood lines and fan motifs, on
tapering legs, 3 ft 2 in wide
Tables—Refectory
Seventeenth-century oak refectory table of slender plain form, the base having square ends united by a single stretcher, 7 ft 3 in long
Oak refectory table on bulbous end supports with central
stretcher, 7 ft 7 in by 3 ft wide 130 0
An exceptionally long oak refectory table with triple curving
supports, 18 ft 6 in long, 3 ft 3 in wide 90 0
Tables—Side
Queen Anne banded walnut side table with two deep and two
shallow drawers on square legs, 3 ft 3 in wide 170 0
Chinese-Chippendale mahogany side table, the frieze carved with
blind fret. Moulded legs, 3 ft wide 88 0
Oak side table with drawer, on turned legs, 3 ft wide 64 0
Walnutwood side table with cabriole legs carved with acanthus
leaves 31 0
Tables—Sofa
George III satinwood sofa table cross-banded with acacia, fitted with two drawers and false drawers opposite on trestle supports with splayed curved feet and brass castors, 2 ft 10 in wide        750 0
Regency banded mahogany sofa table with tulipwood stringing with two drawers on end supports and central stretcher with brass claw feet, 5 ft 10 in extended 380 0
Late George III mahogany sofa table with two drawers in frieze and raised on flat trestle supports with out-curved legs, 3 ft 2 in wide 270 0
George III mahogany sofa table banded in rosewood and with two drawers. It has trestle supports with tripod splayed legs and brass feet, 3 ft wide 250 0
Tables—Sutherland
Mahogany Sutherland table on turned underframe, 2 ft 9 in
wide 42 0
Victorian walnut-veneered Sutherland table on turned supports,
2 ft 6 in wide 36 0
Tables—Tea
Regency mahogany tea table with folding top on a turned pillar and four curved legs, the whole inlaid with brass stringing, 3 ft wide 120 0
Late George II mahogany tea table, the top with a border of flowerheads and ribbon and the frieze and chamfered legs carved with Chinese blind fret, 3 ft wide 60 0
George III mahogany tea table with folding top, a drawer in
the frieze and square tapering legs, 3 ft 8 in wide 38 0
Tables—Wine
Hepplewhite mahogany wine table, the inlaid octagonal top
supported on triple concave curving legs 105 0
Victorian mahogany wine table on pillar and tripod base, 21 in
diameter 10 0
Tables—Writing
George III mahogany pedestal writing table, the gilt tooled leather top with three drawers at each side of the frieze and
the pedestals with cupboards and drawers at either end, 4 ft wide
Early eighteenth-century banded fruitwood writing table, fitted
with three drawers, a shaped apron and on cabriole legs with
pad feet, 2 ft 4 in wide Victorian lady’s mahogany writing table with two short drawers
on lyre end supports, 3 ft wide Carved mahogany writing table with fitted drawer, the top lined
with leather, on cabriole legs, 2 ft 5 in wide
Tallboys and Lowboys
George II walnut tallboy, the top with reeded and canted corners and three small and three long drawers. The base having three long drawers and bracket feet
Queen Anne small walnut tallboy of mellow colour, the upper chest fitted with two small and three long drawers over a brushing slide, and three long graduated drawers
William and Mary lowboy inlaid with scrolls and motifs. The top fitted with two small and two long drawers and two long drawers to the base, 4 ft 3 in high
Georgian mahogany tallboy with dentil cornice and two small and three long drawers to the top and tliree long drawers to the base which is supported on bracket feet
Georgian mahogany tallboy with dentil cornice, the top fitted with two small and three long drawers, the base with three long drawers and supported on bracket feet, 6 ft 1 in high
Waiters
Mid-Georgian mahogany dumb waiter with turned and carved columns supporting three trays. The whole on cabriole tripod feet, 4 ft high
George III mahogany dumb waiter with two revolving tiers and baluster centre on three curved and moulded legs and castor feet applied with roundels, 3 ft 2 in high
George II mahogany dumb waiter with three graduated revolving tiers and spiral fluting on turned central support. Plain cabriole legs, 3 ft 6 in high
Wardrobes
Mahogany breakfront wardrobe fitted with sliding trays, four
drawers and panelled cupboards Small Georgian mahogany wardrobe enclosed by two panelled
doors with three drawers in the base, 3 ft 9 in wide George III mahogany gents wardrobe with pierced swan-neck
cresting, a pair of doors banded in satinwood and two short
and two long drawers below, 7 ft high by 4 ft 4 in wide Regency mahogany wardrobe the upper part with sliding trays
with four drawers under on splay feet, 3 ft 11 in wide
Washstands
Late George III mahogany washstand, the top hinged and opening to form a back, the front with a pair of cupboard doors above one small drawer, on square splayed legs, 2 ft wide
Edwardian three-tier corner washstand with basin 18 0 George III mahogany corner washstand, the slender legs joined
by a stretcher with a drawer, 2 ft wide                                      14 0
Wine Coolers
Georgian inlaid mahogany sarcophagus wine cooler with lion
mask and ring handle on paw feet 65 0
Georgian mahogany octagonal wine cooler with lifting top and
short square moulded legs, 18 in wide 55 0

Earlobes, necks, wrists and fingers are among the chief parts of the human anatomy which lend themselves to applied decoration. As with so many innovations in the field of jewellery, the practice of piercing the fleshy protuberances of the ears for the attachment of ornaments symbolic of race, tribe and status seems to have originated in Western Asia. A sculptured slab from the palace of Ashurnasirpal II (8 83-8 59 BC) in the British Museum depicts the king in profile wearing a long earring with an acorn-shaped terminal. At various stages of history men, women and children have been subjected to the ordeal of ear-piercing, though the male fashion for earrings has been mysteriously intermittent and sometimes a national rather than a cultural phenomenon.
English courtiers adorned themselves with single pearl drop earrings in the late 16th and early 17th centuries but some hundred and fifty years later, when similar ornaments were worn by French officers, the vogue aroused astonishment and hilarity in England. Thomas Rowlandson capitalized on the reaction in 1786 with a cartoon showing French officers in various stages of donning their uniforms-, they all sport earrings. Eleven years later the diarist Mrs Lybbe-Powys was struck by the sight of a French emigre officer in Bath ‘with large gold earrings’. But for all the British distaste, the custom had become general in France and Italy, from the highest to the lowest. Napoleon himself did not wear them, but his brother-in-law Joachim Murat, whom he made King of Naples in 1808, undoubtedly did. In the mid-197os, when the fashion recurred, young Englishmen were among the most enthusiastic proponents of the emblematic use of a single earring.
There is no evidence of the methods employed to pierce ears in prehistoric times but references in more recent centuries establish that the well-to-do employed the services of professional jewellers when the girls in the family were considered old enough to wear earrings. The experience for the victims was usually made palatable by the prospect of possessing a pair of ornaments of their very own. But even that prize was sometimes insufficient. The august presence of a royal jeweller, Dutens, summoned by Mrs Delany to attend her niece Mary Dewes in 1756, failed to persuade the young girl to submit to the operation. She held out for two months before succumbing. Girls of less affluent families were subjected to amateur attention with the aid of a needle, which pierced the ear while the lobe was supported by a piece of wood or other solid material. A cork was popular in the 19th century and later.
Children were dressed as miniature adults until the late 19th century and the ornaments worn by girls reflected contemporary fashions. There are comparatively few breaks in the history of female earrings charted by the authors, the longest being the Middle Ages, when the fashion for swathed heads concealed not only the hair but the ears as well. In the late 16th century women showed a renewed interest in ear ornaments, especially in the pearl drops which predominated for the next century and a half and survived thereafter. They were far more comfortable to wear than the girandole earrings which rivalled the drop type from the late 17th century. Usually comprising a top, an intermediate device such as a bow and three (or more) drops, these articles were so heavy that a secondary loop was often attached to the hook which passed through the ear and a ribbon threaded to the hook to be secured to the hair, taking some of the weight off the ears. This device helped, but many women reduced the period of discomfort by carrying their earrings in their pockets to parties and balls and assuming the ornaments on arrival, padding the backs of the lobes with small pieces of silk.
Fashionable women inevitably suffered permanent distension of the earlobes, which were dragged down by the weight of the girandoles. This fate did not prevent their descendants from participating in another fashion for huge earrings in the late 182os and 183os and suffering the same consequences. One of the most enthusiastic young adherents of the vogue was the future Queen Victoria, who often wore her grandmother Queen Charlotte’s girandole earrings of 1761. Photographs of Queen Victoria in old age, when she sometimes took to simple single-stone or pearl earrings, show them lodged on elongated earlobes. Fortunately the huge variety of new types and fittings means that no one now has to wear one kind of earring for a prolonged period.
The earliest archaeological evidence for earrings dates from the 3rd millennium Bc, but it seems likely that men
and women will have adorned their ears with, for example, shells and polished peb-
bles for centuries before that.
The idea of piercing the earlobe to insert a metallic ornament originated in the Orient. From the start earrings can be divided into two types: the simple rigid hoop in its numerous variations, and the more elaborate articulated pendant. In Antiquity, they were amongst the most popular means of personal ornament.
Around 2500 BC Sumerian women were adorning their ears with gold earrings in the form of single or double crescents, as revealed by findings in the royal graves of Ur in what is now Iraq. The crescent form, comprising two thin sheets of gold soldered together with a hollowed centre, was a simple yet successful design which was to spread towards the West and remains to this day a favourite shape of earring. More elaborate Babylonian examples of the early 2nd millennium Bc, also from Ur, show how the simple crescent motif could be embellished with embossed decoration, the details picked out with filigree and granulation.
Minoan and Mycenean
Early examples of earrings with a tapered hoop design, in a way a thinner version of the crescent- or boat-shaped earring, have been found in graves in Anatolia and Greece. Hooped earrings of gold, silver and bronze, tapered at the ends, have also been excavated in Crete and date from the Middle Minoan period (2000— 1600 BC).
It is not until the second half of the 2nd millennium BC that we find variations and elaborations of the crescent or hoop type; during the Late Minoan and Early Mycenean period (i 600— i 100 Bc) earrings in the form of scalloped or tapered hoops were common in Mycaene, while in Crete during the same period the most widespread form of earring consisted of a tapered hoop decorated with a conical pendant representing a clear progression from the earlier simple hoop.
The tapered hoop supporting a conical pendant was also popular in Cyprus, where several examples come from 13th and 12th century BC graves in Enkomi. Judging from the number of extant examples, this type had a long life; a less elaborate version consisting of a tapered hoop supporting a smaller bead cluster is well testified both in Crete and in Cyprus; it may have been cast in one piece, as a steatite mould of this shape has been found in Crete. This type continued in Cyprus throughout the Dark Ages, reappearing amongst Greek designs of the 7th century BC.
By the end of the 2nd millennium BC, the hoop earring, tapering to a different degree at each end, was widely dispersed in the Aegean world, Western Asia, Cyprus and Syria, as revealed by many excavations.
In Cyprus, from the middle of the 2nd millennium BC, and particularly during the third quarter, earrings were very popular and may have had some supernatural significance, since contemporary painted terracotta idols in the form of stylized nude females, probably fertility symbols, have their earlobes pierced two or three times and large terracotta hoops suspended from them.
The simple, tapered hoop was worn there from about 1400 BC, where it arrived possibly from Crete but more likely from Syria; it continued in Cyprus for a long time, surviving throughout the Dark Ages, and was reintroduced from there into Greece around the 7th century BC.
A variation of this type, of either Cypriot or Syrian invention, consists of a hoop of twisted or plaited gold wire. Also to be found is the ‘leech’ earring, a sort of elongated tapered hoop, the lower part expanded into a fat crescent motif. Hoops supporting clusters of beads or elongated conical pendants decorated with granulation were, as we have already seen, as popular in Crete as they were in Cyprus. A typical Cypriot earring of the 13th century BC was a hoop supporting a bull’s head pendant stamped out of thin sheet gold. Although the shape of the pendant is a common Mycenean motif, no contemporary examples have been found on the Greek mainland.
When, in about 1 100 BC, the Mycenean world succumbed to the Achaean invasion, which was followed by the three centuries of poverty and near-barbarism known as the Dark Ages, the arts declined and jewellery in precious metal became rare. It is likely that the main sources of gold at the time were the tombs of earlier periods. Among the limited number of gold ornaments such as finger-rings, bracelets, pins and fibulae, there survived a small number of spirals, the purpose of which is still not certain, but which may have been earrings or hair-ornaments.
The brilliant civilization of Cyprus was destroyed at the same time, but traditions lived on and the Achaeans left intact the long-established Mycenean techniques. Goldsmiths worked throughout the Dark Ages preserving and perpetuating forms and designs that were to be reintroduced into Greece around the 7th century BC.

FIRST HALF OF NINETEENTH CENTURY
1800-1850
THE year i800 is a convenient date in the history of furniture only in the sense that it marked the begin-
ning of a new century antique hexagon ladles . Apart from that it showed no sudden change in style any more than the start of any other century countries that art deco was very popular . The same king was on the throne and was to live for another twenty years, although for the last ten the Prince of Wales was to act as regent lion feet table . Furthermore, Sheraton, who published his first furniture book in the last decade of the eighteenth century (see p jennens and bettridge . 181), brought out his Cabinet Dictionary in 1803, and lived until 18o6 elephant mahogany antq . Change was taking place, but no more quickly than at any previous period j s henry furniture .
At the same time, the period 1800-1850 is momentous in that it saw the beginning of the industrial age in which the machine began to replace hand labour hinges leaves antique table . At first its effect was scarcely felt, for the machines themselves were crude and unreliable and had not stood the test of time “holland & sons” cabinet . Furthermore, no one had had sufficient experience in their use to use them to the best advantage hammered flatware crest urn . In any case, their early use was largely confined to Government departments such as shipyards 18th century rococo copper candlesticks . Being individually built, they were necessarily expensive 4 foot walnut drop leaf table .
The use of machines speeds up work and reduces costs, and that was largely the reason for their introduction scottish art nouveau inlay furniture . There was, however, another and, in the long run, a deeper-reaching effect 18th century soup urn . This was the influence on design itself circular extending dining table . When you install a machine its first use is invariably to quicken and ease the more back-breaking jobs, such as converting logs, ripping out parts, rough planing them, and so on wileman ironstone coffee pot . Very soon, however, other possibilities are realised, and you see that it can be used for other work which would be difficult or at least expensive by hand craftsman for wooden vitrine . Then comes the idea of adapting the machine for other operations, so that more and more handwork is avoided sheffield plate candelabra . At last hand work becomes a thing to be avoided, and then is born that insidious idea of making the design to suit the machine silver candlestick dated 1750 . In a broad sense this is inevitable because any change in technique of
FIG french drop front desk . 156 antique table porcelain top . MAHOGANY CHAIR WITH BRASS INLAY pre war veneer antique bureau . 18io-i815-
This is of special Interest in that the back legs are not set square with
the front but line up with the slope of the side rails (see plan) brass frame girandole images . This is a
feature not found in chairs of earlier date anglo-chinese furniture . See also F in Fig first antique table de chevet . 157 decorating with a pie crust antique table . Owing
to the pronounced side curvature this results in the bottoms of the legs
converging value of mahogany marble side table .
manufacture is bound to have its repercussions on design, but the evil comes when sound construction and form are sacrificed to suit the limitations of a machine poole pottery streamline coffee sets .
However, up to 1850 there had not been any serious sacrifice in this sense, and during the fifty years we are speaking about there was a great deal of sound and delightful furniture made, especially in the first twenty years of the century brass sideboard gallery .
For those interested in the subject the following few notes
FIG identifying furniture makers bookcase oak . 158 cassone with pastiglia . BLACK JAPANNED CHAIR WITH INLAY two tier rectangular victorian table . Mid antique square to round drop leaf table . i9th century mahogany tea caddy tripod leg .
The entire back is in papier mficU screwed to the
lower framing early tables . The back, legs, and seat rail are
inlaid with mother of pearl dresser with kneehole .
on early machines may be of value antique wood trestle table with leaves . It should be realised, however, that machines were not of necessity power driven black bone inlay dressing tables . Many of them required human labour to turn them aimone mfg co furniture . Even in 1914 some circular saws and bandsaws were still being made which were fitted with handles, and sometimes pedals, which either the operator or an assistant had to work antique maple desks . Some-times larger saws were propelled by horse labour, the animal being yoked to bar which revolved a centre pillar, which in its turn was geared to the saw rh vase austria . Water and wind power too were used antique sideboard with desk .
As early as the fifteenth and sixteenth centuries machine saws had been devised, these generally being reciprocating saws worked by cranks antique gate leg tables . They were exceptional, however, most cutting being done by pairs of sawyers over a saw pit italian 18th century cabinet makers .
FIG satin birch bow chest . 160 jacobean antique furniture . FULLY UPHOLSTERED COUCH sheraton period cutlery urn . About i85o marquetry tray brass handles .
This sketch was taken from a small model made about the middle
of the 19th century, and is typical of the period 18th century amboyna card table .
No doubt the reason for the development of woodworking machines in the nineteenth century was largely due to the tremendous importance of wood as a basic material for all purposes was there a change in arts in italy between 1920 and 1940 . It was needed for ships, vehicles, houses, some bridges, engineering, agricultural appliances, furniture, and so on antique continental porcelain . It was in fact in Government shipyards that the first serious and really practical machines were made american 19th century side boards .
Samuel Bentham developed the rotary system of cutting as distinct from the reciprocating, and designed saws, planers, boring machines, tenoners, and veneer-cutting machines antique swedish armchairs . These were mostly patented between 1791 and 1793, but it would have been many years after that such machines became generally available to the woodworking industry generally art deco harlequin fine china . Marc Isambard Brunel had also much to do with early machines, and had in fact patents on circular saws in 1805 and i8o8 czechoslovakia vases . A bandsaw was patented by Newberry in 1808, but its success was hampered by poor quality saws, and it did not become really practicable until 1850 when reliable saws were made round oak table dragon legs . Many planing machines were invented in the first fifty years of the nineteenth century, some in U antique gateleg table small .S antique divans .A pictures of expensive antiques . Most early machines had wood frames chinese qing porcelains . It was, in fact, not until the turn of the mid-century that all-metal frames were made 18th century marquetry bow front commode .
The refined and somewhat delicate style as exemplified in Sheraton’s works continued during the opening years of the century craftsman for wooden vitrine . The deterioration in his last designs, as shown in his Encyclopedia, 1804-1807, mentioned in Chapter X, was little more than a pandering to a passing fashion, and it is fortunate that the more grotesque items were not made in greater numbers antique william and mary oak dining room sets .
Other influences were at work, however, and to trace these we have to turn to France, where the Consulate and Empire periods in which Napoleon was the dominant figure was producing a marked style known as Empire russian chair lion . This is dealt with more fully in Chapter XV, but it had its counterpart here in a style sometimes known as English Empire wedgewook stonewear white . Its chief exponent was Thomas Hope, who published his Household Furniture and Interior Decoration in 1807 19th century lion claw pedestal table . This, like the French Empire, went back to Greek and Roman forms for its inspiration, and produced some rather severe designs, mostly in mahogany with brass mounts in the form of vases, laurel wreaths, helmets, honeysuckle, lyres, and so on antique oak draw leaf table . The style owed little to tradition, however, and, although much of it was well made and of good proportions, it seems to strike a foreign and somewhat jarring note antique writing box . Many of the shapes, especially chair and settee legs, seem curiously unsuitable for making in wood antique refectory tables .
An attractive chair of about 1810 is that in Fig french word for chasing . 155, and shows a high degree of skill in its manufacture pedestal dumb waiter . The shaping of the members at the back, which necessarily have compound curvature owing to the plan curving combined with the elevation shaping, is beautifully worked out gate leg vintage drop leaf tables . The back-ward curve of the front legs is characteristic of the period and suggests Hope influence biedermeier antique de .
Another chair of about ten years later in date and of somewhat similar style is that in Fig aristide colotte . 156 and is given because it embodies a feature not found in chairs of earlier date drop leaf table rectangle vintage . If any of the earlier chairs are examined, it will be seen that if a section is taken through the back legs at seat level the wood from which they are cut is invariably square with the front king george iv side board .

FIG bambocci antique . 161 drapery designs for dressing table . CIRCULAR DINING TABLE OF ROSEWOOD, BRASS
MOUNTED antique oval dutch table .
1810-1820 antique dealer furniture iron louis xvi .
The lyre motif of the centre pedestal was a common feature of the period egyptian figurine manufacturer in spain .
The ” strings ” are brass rods drop leaf table gate leg . A brass line is inlaid around the top
an inch or so from the edge antiquevenercoffeettableclawfeet . The latter is cross-veneered; also the
framework edging arabesque vertical plate racks - 2 tier .
Thus the chairs in Fig william france furniture maker . 4o are as shown at A, Fig what antique furniture maker marks under drawer front with number . 157 bureau bookcase writing desk display cabinet 1930s . Even when curved as in Figs 18th century plate racks . 77 or 107 they are still set square as at B and C, Fig fiddleback walnut louis xiv reproduction desk . 157, any convergence at the feet being arranged by reducing the length of the seat rail and cutting the shoulders at an angle sauce boats . Much the same applies to the chairs in Fig antique carved trestle table . 142 and to that in Fig neo-rococco cabinet . 155 tulip porcelain chamber pots . The only exception is in some Adam and Hepplewhite chairs, which have either round, oval, or hooped-shaped seats (see Fig antique half round side table mermaid . 132) chiffonier 19th century . In such chairs, owing to the shape, the rails are tenoned into opposite sides of the leg instead of into adjacent sides as in all other examples sheffield plate candelabra . As a consequence the back legs, owing to their backward curvature, are further apart at the bottom than at seat level forks and spoons in the 18th century . This is made clear at E, Fig french dining draw leaf table stretcher . 157 plain serving table .
Turning now to the chair under discussion, Fig colbolt blue plates and antique . 156, note from the plan that the legs are not square with the front, but are parallel with the sloping sides as at F, Fig marquetry roll top desk . 157 antique refrectory trestle table . As a result the legs are closer together at the feet than at the seat,
FIG chamberpot flap . 162 american oak drop leaf table antique . VICTORIAN DINING TABLE IN WALNUT queen anne antique dressing table . Mid johnstone and jupe table . 19th century 18th century metal chamber pot .
The top is veneered with figured walnut arranged in a quartered pattern cage leg antique table .
A huge bolt passes through the centre, Joining the tripod stand to the
pillar and sub-top framework art deco and exotic leather .
this being produced without any side curvature in the leg antique gothic table grotesque . The shape looks more elaborate than it actually is, the shaping being confined to the side elevation of the back iron and wood refectory tables .
The chair in Fig wedgwood keith murray slip two tone . 158 dates from about I85o and is more interesting than beautiful photo antiquities furniture in france . The entire back is in papier mftche, this being compressed to shape and fixed to the back of the seat, probably with screws antique sheffield piece marked “royal sheffield” . There is in fact considerable dishing and shaping in the back and, when it is realised that it is no more than I in scandinavian art deco furniture . to $9 in antique wrought iron candle sticks . thick in parts, it becomes obvious that such a back would be impracticable in wood “art deco” “dining table” french walnut extension . It is, in fact, an early example of a mass-produced chair and bears the marks of deterioration in design four pillar trestle table . As a matter of passing interest, note how the rails are tenoned into opposite sides of the back legs owing to the hooped shape, hence the divergence at the feet (see also E, Fig age of jazz shelley vases . 157) walnut gaming table with pillar legs .
A couch showing the classical influence of Greece is that in Fig antique replica, french victorian mahogany empire desk writing table . 159 napoleon leather and steel campaign chair . It belongs to the Hope period of the early
FIG heal and russell art deco antique furniture . 163 16th century small tables . SOFA TABLE VENEERED WITH AMBOYNA AND
MARQUETRY hongwu copper red .
About 1815 delatte nancy .
The flaps were invariably supported by brackets pivoted on knuckle or
finger joints cut in wood drop leaf table with pembroke leg value . The legs were usually dovetailed to the base,
and it was common practice to strengthen the joints with metal plates
screwed to the underside 19th century regency dwarf parlor cabinet value .
nineteenth century 19th century leather chest . Fig george speight porcelain . 16o shows the rather heavy and stuffy appearance of a fully-upholstered couch in the middle of the century antique serpentine swedish chest of drawers .
An interesting contrast in dining tables made within about thirty to forty years of each other is shown in Figs drop leaf sofa table . 161 and x62 lyre based sheffield candlesticks . The former, of the Regency period, has a certain grace and charm about it empire sideboard antique value . Here again we see the old classical Tables of the Mid-Nineteenth Century
influence in the lyre motif wooton chest . Light though it looks, the table is strongly built since the lyre-shaped pillar is not pierced right through, but is recessed at the surface only antique red stoneware spittoon . The legs are dovetailed to the base john widdicomb desk . The whole top pivots, so that the table takes up little space when not in use longcaseclocks chinoiserie 18.century .
In Fig vintage wooden handled three tined dinner forks . 162 we pass to a typical Victorian table of about 185o which, whatever one may think of the design, is beautifully made ashtray daum nancy france antique . To us it may lack the refinement and grace of the earlier table, but it is an interesting speculation as to what folk of A daniel quare 1674 tortoiseshell case pocket watches .D pilaster bookstand price . 2oo0 may think of it 17 century english stoneware . For years it has been the practice of people to speak of Victorian furniture with something like contempt (though no one really familiar with it would ever deny its soundness of craftsmanship) furniture canape antiques italian . Already, however, it is appearing in antique shops, especially early Victorian pieces, and it is quite on the cards that folk of the future will see beauty in what we now call heaviness and vulgarity 1925 antique floding desk . Fashions change, and nearly all generations are contemptuous of the works of their immediate forbears “myott son & co”+oriental . Presumably the Victorian designers did not intentionally design things they knew to be ugly—and for a matter of that who are we to talk in these middle years of the twentieth century r
A type of table popular during the period under discussion was the sofa table, an example of which is given in Fig antique pier tables . 163 name a piece of furniture that begins with v . It was a type made popular by Sheraton and had hinged flaps at the ends supported by pivoted brackets furniture + finmar ltd . There were invariably drawers beneath the top standing silver mirror candlestick styles . As the table was intended for use away from the wall the ” back ” frequently had dummy drawer fronts small dressing table with cupboard and drawers . Its form during the Regency period is shown in Fig queen mary mother ship tea dish antiques . 163, which shows the Greek influence of the period in the ornament antique 17th century gentleman’s dresser .
The Regency version of the sideboard generally had cellaret pedestals reaching down to the floor and joined by a centre table portion quite open beneath torror in france . There was generally a drawer beneath the top as in Fig small antique french writing cabinet . 164 yabu furniture . Tapered pedestals too were becoming popular, and the scrolled back shows the beginning of a feature which was often to assume quite gigantic proportions in the late Victorian period, and was often surmounted by an elaborate piece of carving, frequently of extremely fine craftsmanship antique wash stands .
Bedsteads in the late eighteenth century were generally of the four-poster type, but by the turn of the century two SIDEBOARD IN ROSEWOOD WITH BRASS INLAY
1810-X820 staffordshire figure home .
The tapered form of pedestal was popular in the Regency period how much is an oak butler’s tray table worth . The relatively large size of room in which
it would have been used is shown by the great depth, which is 29 in greek neoclassical porcelain . over the centre portion, and 251 in richard ginori doccia 1924 platter .
over the pedestals art deco console table black .
Bedsteads of the Nineteenth Century
kinds developed rectangular drop leaf sofa table . In the one the head-posts with abbreviated tester were retained and the foot-posts eliminated early ming porcelain . Frequently head curtains were used, and these could either be drawn right back or pulled a foot or so down the bed antique tilt top dinner table photos 1800 century . The other type owed its origin to the Empire style of France english refectory table . In this the bed was intended to stand with its side to the wall vintage wooden handled three tined dinner forks . There was a head and foot often sloped and having rather the appearance of a couch—the couch in Fig chinese porcelain shards . 159 is in fact suggestive of the general form, though this is necessarily on a smaller scale 19 century inventions . In some cases curtains were carried on to a shaped tester art nouveau origins .
CABINET WITH BOULLE MARQUETRY empire furniture.com .
Louis XIV antique tea table glass serving tray .
The work is carried out in brass and tortoiseshell, and is
decorated with some particularly fine mounts of brass 19th-century swedish table . The
top is of marble antique chippendale breakfast table . The accommodation consists of a centre
cupboard with door and four drawers at each side 19th century, federal mirror .

MID 19TH CENTURY GARDEN FURNITURE
BOTANY WAS A HOUSEHOLD SCIENCE in the 19th
century, appealing to the rational, genteel, pious, and relentlessly self-improving Victorian mindset. Its popularity inspired an unprecedented interest in gardening that permeated the social strata. Jane Loudon’s 1840 publication Instructions in Gardening for Ladies advocated the pastime as one eminently suited to the disposition of the fairer sex, and was a runaway success. The terrarium, invented in 1827 by Dr Nathaniel Ward, allowed people to grow exotic plants in a cold climate — even on a window sill —and protected delicate specimens from harsh urban environments. The abolition of glass tax in 1845 made conservatories more affordable, and they became fashionable settings in which to entertain one’s guests.
Gardens of the period were generally bright and bold, with vast beds planted with swathes of colourful plants very much in vogue. Garden ornaments took many forms, but were rarely subtle. The era that witnessed the introduction of the garden gnome to Britain also saw householders hang brightly coloured
glass globes, called gazing balls, as decorative additions to their gardens. Urns, statues, birdbaths, obelisks, and even life-sized reproductions of animals, all in metal or stone, populated the gardens of the wealthy. The same ostentatiousness was at work in garden furniture design of the period. Where garden chairs and tables had been relatively restrained early in the century, they became increasingly elaborate as the 19th century progressed. Simple, wrought-iron forms gave way to industrial cast iron that mimicked the triumverate of styles — Greek, Gothic, and Rococo —that dominated interiors.
IRON CHAIRS FROM IRONBRIDGE Cast iron was far cheaper than wrought iron or bronze and was ideally suited to use in the garden, owing to its strength and resistance to rust. A number of iron foundries across Europe had been engaged in the production of garden furniture for some time when the Darby family owners of a large iron works at Coalbrookdale in Shropshire, turned their attention to the manufacture of iron products. Taking their lead from companies such as Val d’Osne in France, they built the Coalbrookdale
TRAINED TREE
Heinrich Weber ’s engraving shows
a more unusual approach to garden
furniture. Instead of buying a canvas
sunshade for your garden table and
chairs, it suggests creating a natural,
yet rather formal, sunshade by
training the branches of a tree over
an umbrella-shaped trellis. The table
and chair are cast-iron. c 1850.
Company into the pre-eminent manufacturer of
garden furniture of the mid 19th century. Its
most popular designs are still in production
today The process was an industrial one:
iron was cast from moulds in a variety of different shapes, and then pieced together to produce furniture of various styles. At
the Great Exhibition in London in 1851, the company won a Council Medal, and Queen Victoria paid £300 for a statue of Andromeda made by them. The centrepiece of Coalbrookdale’s 1851 exhibit was its new range of Nasturtium chairs and benches, which epitomized garden furniture design of the period. The ironwork was elaborately pierced with floral designs and scrolling to give a Rococo look, yet the actual
construction of the furniture was simple and suited to mass production.
RUSTIC FURNITURE
A vernacular tradition of handcrafted garden
furniture persisted in tandem with the industrial cast-iron aesthetic. Local craftsmen fashioned and sold basic wooden benches and chairs, as well as more elaborate novelty forms. Unfortunately, few examples now survive due to wood’s tendency to rot, especially when exposed to the elements. In the United States, a celebrated form of rustic timber furniture started to gain popularity in the later part of the 19th century. Named after the mountain range – now a national park – in upstate New York from which it originates, Adirondack furniture used native timbers, such as oak, cherry, butternut, birch, and walnut, and often included the bark. It echoed the local Great Camp
style of architecture in that it assimilated the
natural contours of the branches and roots
from which it was fashioned.
CAST-IRON GARDEN CHAIRS AND TABLE
Each of these chairs has a pierced scroll back and circular pierced seat on four scrolling legs. The table has a solid top and stands on three scrolling legs. There is a lady’s mash at the top of each
table leg. 1880
CAST-IRON GARDEN SEAT The back of this green-painted, cast-iron garden seat for two features a lily-of-the-valley design. The seat is a scrolling cast, and there is leaf decoration on the legs. It may have been made by the American A.J. Mott foundry. Late 19th century.
SWAN GARDEN BENCH This garden bench with its simple board seat and back is transformed by the cast-iron ends formed in the shape of swans. There tire traces of old white and orange paint and repainting in places.
KEW GARDENS
The first gardens at Kew Park were laid out by the Capel family during the late 17th century In 1772, George III inherited the Gardens from his mother and, by the end of the 18th century,
many of the monuments and buildings familiar to generations of visitors were in place. The development of the Royal Botanic Gardens at Kew coincided with a revival of interest in Classicism, itself a consequence of the vogue among the landed classes to go on the Grand Tour. Expeditions by botanists throughout Britain’s expanding Empire unearthed myriad newly discovered plants, which were brought back and exhibited at the Gardens under the “kind superintendence” of Sir Joseph Banks, whom George III had established there in 1773. Banks, who became President of the Royal Society in 1778, established the Gardens as the
British centre for economic botany His death in 1820 coincided with George Ill’s, and Kew
Gardens lost its direction for 20 years.
Between 1841 and 1885,
father and son William and Joseph Hooker held consecutive directorships of the Gardens and contrived a renaissance in its fortunes. Among the developments they oversaw were the construction of the iconic Palm House and the Temperate House – the largest surviving mid 19th-century
glass structure in the world. William Nesfield, a watercolourist turned landscaper, designed a new arboretum for the Gardens as well as the cedar-lined Broad Walk and the parterres around the Palm House. The Victorian obsession with botany bequeathed the world an educational and recreational landmark – Kew Gardens became a World Heritage Site in 2003.
The Palm House This was built between 1844 and 1848 by Richard Turner, with Decimus Burton as architectural consultant. Light but strong wrought-iron “ship’s beams” were used to create a vast 15.2m (50ft) open, pillarless span.

Bracket Clocks
The backplate continued to be engraved, usually with such fashionable motifs as foliate scrolls and flowering urns.
In France curvaceous, asymmetrical forms were Popular from the 1690s, typified by the waisted bracket clock with its inward-curving case and matching wall bracket. Extravagant inlay with exotic materials was typical until c.1750, as were tortoiseshell veneer and gilt mounts; ormolu, lacquer, and porcelain were all popular, with ornate asymmetrical scrolls, shells, and flowers. From c.7750 to c.1800 more restrained lines and rustic, sentimental, and Classical motifs prevailed. Dials on most early 18th-century examples have an enamelled centre, with enamel plaques for numerals this is called a 13-piece dial; from the mid-18th century clockmakers used a one-piece, white, enamelled dial.
Early bracket clocks
The invention of the pendulum in the mid-17th century Trade possible the production of spring-driven clocks with a short pendulum, designed to stand on furniture, shelves, or wall brackets. These clocks, often portable, are usually known in Britain as “bracket” clocks, although few few were actually made with matching brackets; they are also known as “mantel” or “table” clocks. The cases and dials of early 17th
and 18th-century examples largely follow those of contemporary longcases.THE 17TH CENTURY
The earliest bracket clocks, made from the 1660s mostly in England, have cases veneered with ebony, walnut, or olivewood, a pediment-shaped or domed top, a brass carrying handle, bun or block feet, and pierced wooden panels or frets at the sides and/or the front, which were backed with fabric so that the striking mechanism could be heard. Damaged delicate wooden frets were often later replaced by glass panes. Some examples have gilded or silver feet, pierced (known as “basket”) brass tops and frets, and tortoiseshell veneer. The square brass dials often feature an applied, silvered chapter ring, spandrels in the form of winged cherubs, and blued-steel hands. Most 17th-century (and 18th-century) bracket clocks are of eight-day duration, strike the hours, and have a verge escapement; some were converted to the more accurate anchor escapement in the 19th century. Backplates were often engraved with Dutch-inspired tulips and leaves.
French 17th-century bracket clocks are usually more ornate than their English counterparts. One of the earliest forms was the pendule religieuse or Louis XIII clock, with tortoiseshell inlaid with silver and brass, gilt finials, and often gilt acanthus leaf swags or scroll mounts. From the 1690s French examples featured white enamel plaques for each numeral on the dial, on a velvet ground. Dutch clocks also featured velvet-covered dial plates, but their cases — typically in ebony — are plainer.
THE 18TH CENTURY
Bracket cases were usually veneered with walnut or ebonized until c.1730, and veneered with mahogany thereafter. Arched brass dials were introduced c.1715, with calendar work or strike/silent dials in the arch,
and an applied, silvered chapter ring. Some 18th-century examples have quarter-hour as well as hour striking and often a repeat mechanism, operated by a cord.
• CASE designs are similar to contemporary furniture and longcase clocks; British clocks tend to have wooden cases; French cases use a variety of materials
• MOVENIENT early bracket clocks have verge escapements: these were sometimes converted to anchor escapements an d if so the apron over the pendulum rod may be missing or the pendulum bob
will be disc-shaped instead of conical; some clocks were reconverted back to verge, often with a new apron in a style different from the rest of the clock
• ALTERATIONS finials and feet arc often missing or replaced in a different style; delicate wooden frets may have been replaced by glass
• COLLECTING clocks with a matching bracket are fairly rare and so especially collectable; original escapements are desirable; early clocks are highly sought after
Later bracket clocks
Although the longcase clock went into decline in the early 19th century, the bracket clock remained popular. The majority of 19th-century European bracket clocks are typified by elaborate case design in a variety of styles. The clock industry expanded in the USA, and from the 1840s mass-produced, inexpensive American bracket clocks, or “shelf” clocks, were imported into Europe, contributing to increased competition but ultimately to a decline in the European industry, especially in Britain.
REGENCY BRACKET CLOCKS
From the 1790s to the 1820s British bracket clocks were produced in diverse styles, from the satinwood-veneered “balloon” case, similar to the French waisted style, to the chamfer-top case. The chamfer-top style has a flattened pediment top, influenced by the contemporary Greek Revival style in architecture, and is crowned by a cast and gilt finial. Cases were usually veneered in mahogany or rosewood or ebonized, often with brass strip inlay in delicate scrolling designs. From the end of the 18th century bracket clocks were usually kept in one position rather than transported around: for this reason they often no longer had carrying handles at the top, although most chamfer-top clocks have ornamental brass ring handles on the sides, often held by lion masks.
The large, round, convex dials are among the easiest of faces to read: made of silvered brass, painted iron, or white-enamelled copper, they are usually very plain except for the maker’s signature. The simple brass or blued-steel hands are typically pierced or feature ornamental spade or heart tips. The movement is spring-driven with an anchor escapement.
VICTORIAN BRACKET CLOCKS
By the mid-19th century novelty of case design was all-important. The numerous revival styles, especially the Gothic Revival, were particularly influential. Gothic Revival clocks, popular between the 1830s and 1850s, have the same basic form as Regency clocks, but the dial plate is in the shape of a pointed arch, the fretted side panels imitate Gothic tracery, and cluster columns, copied from medieval architecture, ornament the corners. In contrast to the simpler Regency forms Victorian clocks tended to be elaborately decorated with heavy carving and mounts. Some featured complex striking mechanisms, with chimes on bells, and gongs on the quarter hour. Substantial three-train chiming “director’s” or “boardroom” clocks arc typical of the high Victorian period.
Dials were made in a wide range of materials, including plain or silvered brass and painted iron; the use of Arabic numerals was common from c.1870.
It is unusual to find a Regency bracket clock with its original
matching bracket. Many chamfer-top clocks of this type were made in mahogany or rosewood, but this example has an ebonized wood case. Brass strip inlay, bun feet, pineapple finials, and large, round, white-painted dials are typical of early 19th-century British bracket clocks. (c. 1820, ht excluding bracket 4Bcmll9in; value H)
of the retailer, although the best makers also sold their own clocks. The British clockmaking industry gradually declined from the 1840s owing to growing imports of mass-produced American and German clocks, but fine bracket clocks were made in Britain until World War I.
AMERICAN SHELF CLOCKS
Large-scale production of clocks first began in the early 19th century. Although many were exported to Europe, most surviving examples are found in the USA, where they are popular with collectors. Connecticut-based Eli Terry ( 1772-18-52) was the first to produce inexpensive movements, mostly of wood, using slick production methods and standard parts. In the 1830s Chauncey Jerome (1793-1868) invented 30-hour duration movements from rolled brass, which were both easier to make and more reliable than wood.
Although less expensive materials were used for American cases than European ones, designs were just as varied. Most carcasses were softwood veneered with mahogany, with a maker’s label on the interior, and thin, sheet-metal or wooden dials painted white. Clocks were simply designed to meet functional domestic demands, and used little brass so as to keep costs down. Notable designs were the “pillar and scroll” clock (until c.1830), with elegant side pillars, a scrolled pediment with finials, and simple, scalloped feet and skirt; the “three deck” design, with the case divided into three and decorated with half columns at the sides; the “acorn” style, with a wide, curving trunk; and the “steeple” clock, with a pointed gable and pinnacled side pillars. Most clocks are embellished on the front door with verre eglomise (reverse-painted glass) panels. At the end of the 19th century many American makers copied French marble mantel clocks, using imitation marble of enamelled iron or painted wood; some cases were of papier-mache inset with mother-of-pearl and painted with floral designs.
Regency bracket clocks
• HANDLES many examples have brass side handles, commonly with lion mask or cornucopia mounts
• CASES a variety of styles was produced but most were made of mahogany or rosewood with ball or bracket feet; the best examples have brass strip inlay in scrolling or floral designs
• DIALS most arc round and convex, and of silvered brass, white-painted iron, or enamelled copper; hands, plain or pierced, arc of simple, elegant design
Victorian bracket clocks
• CASES designs are varied, since originality of case was sometimes considered more important than the movement or any mechanical refinements; cases for chiming clocks were elaborate and heavily carved
• DIALS Arabic numerals were popular from c.1870; any name is often that of the retailer rather than the maker
American shelf clocks
• CASES most are softwood, veneered with mahogany; styles are varied but the majority of cases arc decorated on the front with verre eglomise panels
• DIALS these are usually of wood or metal, painted white; dials were not usually signed – instead a label with the maker’s name was usually pasted to the case
• MOVEMENTS early clocks have wooden movements with steel pivots; thin rolled brass was used from 1830s
FRENCH BRACKET AND MANTEL CLOCKS
The late 18th to early 19th century was a great period for French clockmaking, and a tremendous range of clocks was produced, some of them highly sophisticated. The work of the casemaker was as important as – and sometimes more important than – the complexity of the movement: cases are typically made of marble or bronze, embellished with rich gilt-bronze (ormolu) mounts, and generally more ornate than those on British examples. Most such clocks were made in Paris and reflect the influence of the Neo-classical style; ornamental motifs include Classical urns, vases, palmettos, festoons, and swags. One notable design – intended to illustrate the technical sophistication of the clock – is the lyre clock, which features a central gridiron pendulum with metal rods like the strings of a lyre. The multiple rods that form the gridiron pendulum expand and contract at different rates and in varying directions with changes in temperature, ensuring that the length of the pendulum remains constant and the clock highly accurate.
Most late 18th-century French mantel clocks feature round, convex dials, usually enamelled in white with black numerals. A few rare and highly collectable clocks produced in the 1790s have Revolutionary dials: in 1793 the Revolutionary government decreed that clocks and watches should show decimal time, with ten hours in a day and one hundred minutes for each hour. This system was, however, very short-lived.
Classical influences continued into the Empire period, but case designs became ever more ornamental and elaborate. Some were miniature replicas of the furnishings of the period, with figures in Grecian dress stated at tables or with musical instruments.
As industrial production was encouraged by the French government, mechanisms were increasingly standardized – most were fitted with an anchor escapement.
A huge variety of clocks was made in the mid- to late 19th century. A distinctive French design of the second half of the 19th century was the mass-produced, black marble mantel clock, assembled from pre-shaped marble or marble-faced cement. Polished black slate was often used for facings to reduce costs. Only the better-quality pieces, embellished with bronze relief decoration or such mechanical refinements as a perpetual calendar or moon phase dials, are of interest to collectors today. Other designs included the four-glass clock (from c.1850), featuring four panes of glass, and 18th-century revival styles, most of which were produced in gilt metal in the later 19th century. Most 19th-century examples arc of eight-day duration. After c.1870 many cheaper versions of ormolu clocks were made of inferior gilt speller.
• CASES most have ornate cases made of bronze or marble, decorated with rich ormolu mounts; mass-produced marble- or black-slate-faced mantel clocks were common from the late 19th century and are generally inexpensive
• DIALS most arc round and convex, with ormolu surrounds; gilt-metal hands were used c.1800;
later examples have blued-steel hands
• COLLECTING some clocks were produced with matching pairs of candelabra or vases, designed to stand either side of the clock on the mantelpiece; a complete set is desirable and enhances value

Settles and sofas before 1840
The box-settle was in existence in northern Europe by the 15th century. The earliest examples usually have planked seats and pierced trellis or linen-fold panelled backs, and are often richly carved. A plainer and sturdier form was the oak “monk’s table”, which had a bench-like seat, often set above an enclosed well used for storage, and a hinged back, which when brought forward served as a table. This basic form was adopted by furniture-makers in Britain (particularly in the provinces), and the Low Countries from the 16th century. Early box-settles were usually of oak, although elm, chestnut, and fruitwood were increasingly used during the 18th century; they continued to be made in the provincial tradition until well into the 19th century.

DOUBLE CHAIR-BACK SETTEES
The double chair-back settee dates from the mid-17th century, and its evolution reflects that of the chair back (splat). Invariably of walnut, this type of furniture is distinguished by caned seats, carved upright splats, and baluster-turned or strapwork legs joined by stretchers. By the late 17th and early 18th centuries the double chair-back settee was characterized by a drop-in, upholstered seat, slightly serpentine toprail with vase or baluster-shaped splats, and cabriole legs with pad feet. Usually made of walnut, it became increasingly bold and elaborate in form and decoration; by the reign of Queen Anne (1702-14) settees were frequently veneered with burr-walnut and enriched with seaweed marquetry on the splats and legs. George I examples (1714-27) were often inspired by the architect William Kent (c.16851748), and have carved shells, foliage, lion-masks and paws, and eagle’s-head arm terminals and claws. Mahogany settees were first made under George II (1727-60); those from the 1750s and 1760s frequently follow chair-patterns in the Chinese, Gothick, and French Rococo styles popularized by Thomas Chippendale (1718-79) in The Gentleman and Cabinet-Maker’s Director (1754-62). Continental examples were often gilded or painted with flowers and chinoiserie decoration, and are far more Rococo in form than their English counterparts, with exaggerated cabriole legs, serpentine toprails, and asymmetric splats. This latter feature is also characteristic of Dutch double-chair back settees, which parallel English Queen Anne and early Georgian examples, save for the enrichment of floral marquetry. However, Dutch chair-back settees with floral marquetry on a mahogany, as opposed to a walnut, ground are more usually 19th century. English settees of the late 18th and early 19th centuries are usually of carved mahogany or satinwood. Painted designs include peacock feathers and flowers in the manner of George Seddon & Sons (est. 1785), and Etruscan-black decoration, inspired by Classical vases. These painted examples are usually of beech and often display caned or rush seats with squab cushions.
CANAPES AND CHAISES-LONGUES
Canapes with padded backs and seats dating from the reign of Louis XIV (1643-1715) usually have walnut frames with simple channelled decoration to the legs and stretchers, scrolled arms, and cabriole legs. The most sophisticated canapes of the Regence period (1715-23) are masterpieces of the carver’s art; their giltwood or walnut frames were carved with foliage, shells, and chimerical dragons, and their backs strewn with flowers in the style of Juste-Aurele Meissonnier (1695-1750).
During the 1730s and 1740s, Rococo canapes became even more exaggerated in form and detail. They were usually gilded or of walnut, although Italian craftsmen also employed a mix of silver and gold leaf, a decoration known as mecca. Italian canapes are often less well constructed than French seat furniture.

The chaise-longue was characterized by its long seat, which enabled the sitter to recline horizontally, and was first recorded in France, Italy, and England in the late 17th century. Louis XIV chaises-longues were usually of carved walnut or beech, with caned seats and squab cushions. During the early 18th century the frames became richer and more florid, often being gilded or japanned in imitation of Oriental lacquer, while the caned seats were rejected in favour of fully stuffed and upholstered seats. Usually carved in lime or beech, and intended to be painted or gilded, inid-18th-century Continental chaises-longues were of a pegged construction. Although rarer, day-beds, usually without side-supports, were also made in England during the mid-Georgian period.
It was under the influence of the Prince of Wales (later George IV) and his circle that the chaise-longue reached its apogee in England. The form was the perfect vehicle for the reproduction of Greek, Roman, and Egyptian ornament. Simpler Regency chaises-longues were also widely manufactured, mainly in mahogany or rosewood, perhaps inlaid with brass in the “Buhl” manner. Painted examples with Etruscan-inspired ebonized and parcel-gilt decoration, or with a grained or stencilled finish, also abound. The earliest Regency chaises-longues are light and elegant, with simple, free-flowing lines, sabre legs, and brass caps and casters. Examples from the 1820s and 1830s are increasingly florid and heavy; they are supported on claw feet and arc often richly carved with exaggerated, stylized foliage.
DUNCAN PHYFE (1768-1854)
The best-known New York cabinet-maker of the early and mid-19th century, Duncan Phyfe also gave his name to the generic term for American furniture in the Neo-classical style, making use of the forms and ornament of Classical Greece and Rome. The work of Phyfe and his contemporaries incorporates “curule” (Grecian-cross design) legs or sabre legs, paw feet, harp and lyre backs, caned toprails, and decoration showing sheaves of wheat, thunderbolts, cornucopia, and swags. Unless documented by a bill or label, New York Federal and Classical furniture should be attributed to the Phyfe school. Phyfe-type furniture was made into the mid-19th century, with a revival in the late 19th and early 20th centuries.

EARLY 19TH-CENTURY SOFAS
The development of the chaise-longue in the 19th century was mirrored by that of the sofa. From c. 805 to 1810 sofas became increasingly bold and luxurious. Frames of plain mahogany were initially fashionable, carved with Grecian ornament as promoted by George Smith (active c.1786-1828) in his book A Collection of Designs for Household Furniture and Interior Decoration (1808); these were superseded by more florid examples in rosewood and, later, walnut, upholstered with bolster cushions at each end. This extravagance was continued in the design and decoration of the frames, which often had tightly scrolled arm-terminals and were embellished with gilt-bronze mounts or inlaid in the “Buhl” manner with foliate arabesques, as on sofas by the firm of Gillow (est. c.1730). The sofas were supported by hairy-paw feet. As seen in the designs of Michel Angelo Nicolson (c.1796-1844) in The Practical Cabinet-Maker, Upholsterer, and Complete Decorator (1826), the basic Regency form persisted throughout the 19th century. However, sofa designs became heavier as the century progressed, with the introduction of shorter and fatter legs, often reeded, and tapering to brass caps and casters.

•    BOX-SETTLES the most lavishly decorated settles, particularly those with linen-fold panelled backs, are often examples of 19th-century antiquarianism, in which old panelling has been reused or plain types have been later carved or embellished
•    DOUBLE CHAIR-BACK SETTEES the majority of these are 19th-century copies, which may be identified by the quality of the timber and carving, and by the use of carved ornament borrowed from different periods
•    CHAISES-LONGUES mid-18th century Continental chaises-longues should be of pegged construction; 18th-century examples were widely copied in the 19th century – these later pieces are usually betrayed by the stiffness of the carving; chaises-longues have very often been regilded (this will not affect the value if the work is of a high quality); examples that were once brightly painted have often faded

Easy chairs before 1840
As the Baroque movement swept through Europe during the late 17th century, the design of seat furniture became increasingly luxurious, elaborate, and more importantly comfortable. Caned and leather chairs, which until this time had sufficed, were largely abandoned in favour of richly upholstered easy chairs as stiff upright backs were discarded and were replaced by sloped and subsequently shaped backs. The number of types of chairs also increased enourmously.
ITALY AND FRANCE
It was in Italy, particularly in Venice, Florence, and Rome, during the late 17th and early 18th centuries, that the Baroque style found its clearest expression. The most elaborate open armchairs of this period are usually of either boxwood or giltwood. They are carved with scrolling acanthus, espagnolette masks, and even mythological figures emblematic of the four seasons. Some Venetian examples feature seahorses in deference to the city’s seafaring tradition. Such pieces were usually the work of trained sculptors who had turned their hand to furniture-making; the most celebrated of these was undoubtedly Andreas Brustolon (1662-1732).
In France, under the influence of Cardinal Mazarin, the court of Louis XIV (1643-1715) became increasingly hungry for foreign luxuries and fashions, especially those from Italy. In the mid-17th century French easy chairs became increasingly comfortable and elaborate, owing to their generous proportions, richly turned decoration, and lavish use of velvet upholstery from Genoa or Utrecht.
The Regence period (1715-23) saw significant developments in the design of seat furniture. Although the menuisiers (joiners) were slow to abandon the traditional Louis XIV fauteuil (armchair) form, they were increasingly lavish in their carving. Chairs were decorated with gadroons, shells, and rosettes, and even richly upholstered in velvet or lavish textiles made at the Savonnerie in Paris (est. 1604 in the Louvre for the production of textiles; from 1627 at the Savonnerie). The stretcher became more sinuous, and was abandoned by the 1720s. Further changes in form and design were
dictated by the fashion for wearing hooped dresses, introduced c.1720, which resulted in the arms of easy chairs being set back by a quarter of the length of the side-rail. The introduction of upholstery it    allowed the loose covering to be changed according to the season.
Under Louis XV (1715-74) the fashion
for placing chairs around the sides of the room was abandoned in favour of a more relaxed arrangement that encouraged intimate conversation and gave birth to the fauteuil en cabriolet, with its Rococo form and exuberant carving in the round. Louis XV seat furniture is usually made of either walnut or beech, the latter wood
always either gilded or painted; a
pegged construction was used, and pieces are very often stamped by the menuisier responsible, in accordance with the strict rules of the furniture-
makers’ guild (Corporation des Menuisiers-Ebenistes). During the 1730s numerous styles of informal easy chair emerged, all of them richly carved. The most luxurious was the bergere, which was popular throughout the 18th century and characterized by its deep seat, padded back and sides, and squab cushion. Widely copied throughout Europe, it was to prove inspirational to chair-makers during the Regency period (c.1790-1830) in Britain, and was also much copied in the late 19th and
20th centuries.
BRITAIN AND NORTH AMERICA
The earliest-recorded wing armchairs, known as bergere en confessionnal because the identity of the sitter was hidden by the side wings, are French examples from the early 1670s. Invariably of walnut, this form was rapidly adopted in Britain. The wing armchairs made during the late 17th and very early 18th centuries were usually of walnut or, in more provincial examples, of beech stained to simulate walnut. These armchairs are characterized by the exaggerated scroll of the arms, the high, slanted back flanked by high wings, and the stylized carving of scrolls and foliage on the legs and stretchers.
The most celebrated form of wing armchair was made from the early 18th century until c.1750. Examples are usually of walnut, and are
supported on cabriole legs, which, unlike their 17th-century prototypes, are rarely joined by stretchers. Wing armchairs made in Britain during the reigns of Queen Anne and George I are often carved with trailed husks and scallop shells on the top of the knees and stand on pad feet, although some later examples have hoof or claw-and-ball feet. The most refined wing armchairs of this period were upholstered in gros and petit point needlework, often with figures on the back (but never on the seat) within a flower-strewn border.
Wing armchairs continued to be made throughout the 18th century in mahogany, and were widely copied in walnut in the 19th and 20th centuries. North American early 18th-century wing chairs were generally of walnut or maple, with a high arched crest, and block and vase turned legs joined by a stretcher. During the 1720s short cabriole legs with “Spanish” feet, were used and front stretchers were eliminated. From the mid-18th century mahogany was used. Stretchers continued to be used in New England, while easy chairs made in Philadelphia generally did not have them. In 1760 the serpentine crest design was introduced, modifying the verticality, and it was used along with the rounded profile until the 1780s. Between 1780 and 1800 American chair-makers used George Hepplewhite’s design for a “Saddle Check Chair”, an easy chair with serpentine contoured wings, straight legs, and “H” stretchers, a chair design also associated with Thomas Chippendale (1718-79). There are regional differences in construction and upholstery. Maple was often used for the one-piece rear legs and stiles in New England chairs, stained to match the mahogany of the front legs.

A Library bergere or “Uxbridge” chair
This British armchair is of a style introduced in the early I8th century for use in the library. It has a cane-filled back and sides, and leather-covered cushions, the best examples have reeled or fluted front legs (early 19th century; ht 1.2ml3ft 1 lin; value 1)
Other types of late 18th-century easy chair were based on designs in The Cabinet-Maker and Upholsterer’s Drawing Book (1791-1802) by Thomas Sheraton (1751-1806) including “conversation” chairs, with deep upholstered seats and padded toprails on which the sitter, facing backward, could rest his or her arms. In Sheraton’s The Cabinet Dictionary (1803) there is a reference to a “curricle” chair, so-called after a tub-shaped carriage, which was popular in libraries at the time. About 1810 to 1820 bergere-type armchairs with deep, upholstered or leather seats and backs, and cane or upholstered sides, were also widely used in libraries.
SCANDINAVIA
Trade between England and Scandinavia was well established by  the mid-17th century, and some English furniture had been exported to Scandinavia by the end of the century. Craftsmen in these countries produced good copies of English furniture; the joiners (although not the cabinet-makers) were very conservative, with the result that early 18th-century styles continued to be produced until c.1800. Around this time, too, mahogany was introduced; before this, walnut was used for expensive pieces. More commonly employed, however, were native light-coloured woods such as birch, ash, and pine; these were left bare, stained, or painted in colours.
By the late 1730s French designs had become increasingly popular at the Swedish and Danish courts and also with the upper classes in these countries; the middle classes did not generally adopt the new fashions until the end of the century. French styles were particularly influential in Sweden, and from the Rococo period court architects were trained in Paris. One of the most influential Swedish designers of the period was Jean Eric Rehn (1717-93). Danish court architects learned their trade in Germany, but this situation changed after the reign of Louis XVI, when both countries adopted the French Neo-
classical style. In Sweden the cabinetmaker Georg Haupt (1741-84), who had trained in both Paris and London is well known for his work in the Louis XVI style. This style developed into the Neo-classical Gustavian style during the I 770S.

AMERICAN “CHIPPENDALE”
The carvers of the most elaborate American Rococo furniture were immigrants from England, Scotland, and Ireland, who had served their apprenticeship in London before going to North America. The first of them arrived in the 1740s, but the great wave of craftsmen tsmen was in the 1760s. Philadelphia was the city most hospitable to immigrants, and more Rococo furniture was produced there than in other colonies. The major cities in America developed distinctive furniture styles, due to the taste of the gentry, the mix of native born and immigrant craftsmen, and the availability of imported
furniture and English pattern books. It is known that there were copies of Chippendale’s Director in Philadelphia. The Library Company of Philadelphia acquired a copy between 1764 and 1769, and two cabinet-makers Thomas Affleck (1740-95) and Benjamin Randolph, owned copies. In America furniture was mostly made of solid pieces of primary wood, rather than veneers over a seconday wood carcase as in England.

RUSSIA
Throughout the 18th century Russian furniture was inspired by French and to a lesser degree English designs; by c.1815 German influence is also apparent. Generally the timbers used for Russian furniture were indigenous; during the early 18th century, when designs were dictated by early Georgian furniture from Britain, they included oak, beech, and walnut. By the 1720s Russian armchairs had tall curved backs with a vase splat and cabriole legs. By the mid-18th century, the taste for Rococo and Chinese ornament had spread to Russia due to the publication of such influential pattern-books as The Gentleman and Cabinet-Maker’s Director (1754-62) by the English cabinet-maker Thomas Chippendale (1718-79). English-style chairs with pierced splats and sweeping cabriole legs with claw-and-ball feet, usually made in mahogany, were increasingly popular.
However, from the beginning of the 19th century the clearest influence on Russian furniture manufacture was that of France. Particularly favoured was the Empire style of the cabinet-maker Georges Jacob (1739-1814), who was based in Paris. About this time, light-coloured woods also became popular, anticipating the Biedermeier style in Germany and Scandinavia. From c.1815 chairs were executed in indigenous woods such as Karelian birch, maple, and poplar, decorated with restrained stringing.
HALL CHAIRS
Hall chairs (and also hall benches) were introduced in Britain from the late 17th century. They may have been inspired by similar chairs known as sgabelli, which were popular in the great Italian palaces during the 16th century. Hall chairs were designed to be placed in the entrance hall or passageways used by servants and tradesmen waiting to be called into one of the main rooms. Consequently such chairs were never upholstered, and generally they lacked arms; however, they were increasingly made of mahogany, with solid backs and dished or shaped scats. The designs were bold and simple and were frequently embellished with the painted crest or coat of arms of the family who commissioned them. In some cases they were carved with motifs intended to impress guests and to emphasize the social status of the owner. The importance given to hall chairs is suggested by the fact that there are six designs for such chairs in The Gentleman and Cabinet-Maker’s Director by Thomas Chippendale, three in The Cabinet-Maker and Upholsterer’s Guide (1788-94) by George Hepplewhite (d.1786), and two in The Cabinet Dictionary (1803) by Thomas Sheraton (1751-1806).

THE BIEDERMEIER STYLE
This decorative style was popular in Germany, Austria, and Scandinavia between c.1815 and c.1848. The name was invented by two German poets who wrote under the pseudonym Gottlieb Biedermeier, formed from a combination of bieder (meaning conventional or honest) and Meier, a common German surname. The solid, comfortable appearance of Biedermeier pieces was thought to mirror the unpretentious elegance of the German bourgeoisie. The simple, geometic designs, which eschewed ornate decoration, were inspired by French furniture of the Empire period. Function and comfort were of supreme importance to the Biedermeier craftsmen and to achieve this end they used coil-spring upholstery.

•    UPHOLSTERY gros and petit point arc very rare and greatly contribute to the value of a wing armchair
•    REGILDING well-executed regilding should not dramatically affect the value of an object; French Louis XV beechwood chairs were usually originally gilded or painted and traces are often found in the crevices
•    HALL CHAIRS these arc usually found in sets of four or more, although it is possible to find single chairs; they are often decorated on the back with a cartouche featuring the armorial of the family who commissioned them; they are generally very good value for money
•    COPIES AND FAKES Brustolon-style chairs were widely copied in the 19th century; Biedermeier chairs have been been widely faked in the 20th century, with many side chairs converted into armchairs – this should be obvious if the proportions seem wrong

19th Century Victorian English Busts and Statues
Parian, or “statuary porcelain”, was possibly the most significant ceramics development in Britain during the Victorian period. Named after the Greek island of Paros for its resemblance to the white marble quarried there, parian was a bone china that contained a high degree of feldspar, which meant that it did not need a separate glaze. Decorative wares could therefore be displayed without becoming dirty, unlike earlier biscuit, or unglazed, white porcelain, which was coarse and difficult to clean. First made in the 1840s, parian was capable of being moulded without losing any detail, with the result that contemporary sculptors could have their works successfully reproduced for the mass market. Parian was also made in the USA at the United States Pottery in Bennington, Vermont.
IMPORTANT MAKERS
There remains Uncertainty as to which factory invented parian. The firms of Minton & Co. (est. 1793) and Copeland (1833-1933), both in Stoke-on-Trent, claimed to have discovered the secret; both were making parianlike porcelain by the mid-1840x, and at the Great Exhibition of 1851 in London they displayed an extensive range of parian subjects. Other famous makers included Royal Worcester (est. 1862), Coalport (est. c.1796), and Wedgwood (est. 1759), all of whom made a range of wares, figures, and busts, while Wedgwood also made impressive, large figure groups. Smaller portrait busts were the speciality of Robinson & Leadbeater (est. early 1860s), in Hanley, and others were made by the firm of Goss ( 1858-1940), in Stoke-on-Trent. Parian dominated English porcelain production for display objects for about 40 years, and a great deal survives.
PORCELAIN BUSTS AND STATUES
Models for parian were provided by eminent Victorian sculptors, whose full-sized statues could be reduced in size and reproduced in quantity for commercial sale without losing quality. The work of contemporary sculptors such as John Bell (1812-95), Raphaelle Monti (1818-81), and Sir Thomas Brock (1847-1922), together with famous Classical statues housed in museums, could be reproduced and sold to a wide public. A device known as “Cheverton’s
Reducing Machine”, patented by Benjamin Cheverton in 1844, was developed to allow subjects to be scaled down and cast in moulds for the ceramics factories. Busts were made of various subjects, including royalty, politicians, philanthropists, poets, composers, and
characters from antiquity. Figures ranged from meaningful allegories to barely disguised eroticism; for example, The Greek Slave, a controversial sculpture by the American sculptor Hiram Powers (1805-73), was displayed at the Great Exhibition of 1851 and copied by Minton & Co. Many parian figures were made either for the Art Union of London or for the Ceramic and Crystal Palace Art Union, which were lotteries set up by philanthropic Victorians to raise funds for the arts; parian works were frequently offered as prizes. The manufacture of artistic parian gradually diminished in favour of the large-scale mass production of portrait busts, and little of any consequence was nude after c.1880.
• BODY fine, highly vitrified, generally pure white
• FINISH matt, semi-matt, or with a slight surface sheen
• PRODUCTION usually slip-cast, therefore quite light
• FORMS sentimental figures; figures Of politicians, royalty, and composers; literary, religious, and allegorical subjects; copies of famous Classical statues housed in museums; works by Victorian sculptors
• IMPORTANT MANUFACTURERS Minton & CO.,
Copeland, and Robinson & Leadbeater

Rockingham
During the 1820s all established pottery works at Swinton in South Yorkshire was moved to the Wentworth estate of Earl Fitzwilliam, Marquess of Rockingham, and expanded by the Brameld family to include a porcelain works, with financial support from the Marquess. Bone china was first made there c.1825, and the factory, known as “Rockingham”, soon developed a very individual style.
THE ROCOCO REVIVAL
The Rockingham factory is synonymous with fancy shapes; indeed, the term “eccentric” is often used for the wares, with some justification. While certain Rockingham designs are plain and elegant, the makers became masters of the Rococo Revival, and specialized in lavish moulded decoration. Perhaps the most extravagant examples of this style are the two large “Rhinoceros” vases (c.1826) with rhinoceros-shaped finials, one of which is in the Victoria and Albert Museum in London. Tea-sets were made in the shape of plants with overlapping leaves, and handles were often in the form of gnarled branches. Many of the shapes have a rustic quality- even the most celebrated dessert service made for King William IV c.1830 included curiously shaped centrepieces. Fine painters, including Thomas Steel (1772-1850), famous for painting fruit, and George Speight, famous for figure Subjects, decorated plaques, vases, and dessert services. In competition with similarly styled wares made at the factories of Minton & Co. (est. 1793), in Staffordshire, and Coalport (est. c.17 96), in Shropshire, Rockingham porcelain encrusted with modelled flowers copied the style of contemporary wares made at the factory of Meissen in Germany.
THE ROCKINGHAM CONFUSION
Rockingham teawares competed with those produced by such factories as Ridgway (1792-1848) and Davenport (c.1793-1887), using coloured grounds and painted floral reserves. Rockingham figures were often exact copies of Derby, since all the principal English factories supplied the same
Englis
shops. The reason that Rockingham achieved greater fame than its contemporaries is that it marked so many of its
products. Unfortunately, unmarked tea-sets from factories such as Coalport, Ridgway, and Samuel Alcock & Co. (est. 1826) were mistakenly called “Rockingham” because they represented the same Rococo
Revival fashion and looked similar to
the marked Rockingham wares. Manv
Victorian homes owned such tea-sets,
and these have been passed on as
“Rockingham” china, although
very identify few were actually made by the
Yorkshire factory. To denrify such
sets correctly, it is important to learn the distinctive shapes made at the factory and its pattern numbers. In the same way,
Rockingham marks on small animals led to
the incorrect attribution of a great range of Staffordshire porcelain ornaments, especially
sheep, shaggy served as
shaggy poodles, and cottages, which served pastille burners. Because of such confusion, Rockingham became a household name for inexpensive ornaments.
Rockingham was also renowned for its lavish and ambitious dessert services, such as that commissioned for the coronation of William IV in 1831, which was ready in time for the coronation of Queen Victoria in 1838. Partly because of the costs associated with such services, the factory was forced to close in 1842.
• BODY bone china, ivory toned, prone to crazing and discoloration
• STYLE Rococo Revival
• FORMS decorative wares, pot-pourri vases, lavish tea and dessert services
• DECORATION heavily encrusted with flowers
• COLLECTING output was very small; handle shapes on teawares, and the shapes of vases, must match known Rockingham examples