Posts Tagged ‘brass’

Globes
Pair of early nineteenth-century mahogany library globes by Newton, published in 1838 and 1836. The tripod frames with out-scrolled legs ending in brass castors, 3 ft 8 in high        780 0
Large pair of terrestrial and celestial globes by Newton; published 25 March 1875. Supported in mahogany frames on triple curving legs 205 0
Pair of terrestrial and celestial globes in turned stands by James
Wyld, Charing Cross East; published 1847 185 0
Knife Boxes
A pair of mahogany urn-shaped knife boxes, stamped W. Johnston, with domed lids and bodies inlaid with flowers and stripes, 2 ft 5 in high 115 0
Sheraton  inlaid  mahogany serpentine-fronted knife box in
original condition 32 0
Mirrors—Mantel
Empire-style giltwood overmantel with triple mirrored panels
and decorated with classical figures 105 0
Rectangular mantel mirror in a giltwood frame carved with
acanthus and shell motifs, 31 in by 25 in 60 0
Mirrors—Toilet or Dressing
Sheraton serpentine-fronted box-frame toilet mirror fitted with
two drawers, 17 in wide 36 0
Sheraton box-frame shield-shape toilet mirror with two drawers,
18 in wide 30 0
Mahogany box-frame toilet mirror with three drawers, 15 in
wide 15 0
Edwardian   mahogany   box-frame   toilet  mirror   with three
drawers to base, 22 in wide 9 0
Mirrors—Wall
Pair of Chinese-Chippendale giltwood girandoles of rococo outline mounted with phoenix-birds and clusters of flowers from which issue two scrolled candle branches. The base enriched with acorns and oak leaves, 38

in high 650 0
Mid-Georgian wall glass in a giltwood frame carved with scrolls
and foliage and pierced, 44 in high 200 0
Chippendale mahogany mirror with gilt gesso beading
George IV convex mirror in a gilt frame enriched with spherical ornament with two scrolled candle sconces. Crested with a gilt eagle with outspread wings 76 0
Regency giltwood convex mirror with ball encrusted moulded
frame and ebonised slip, 1 ft 11 in diameter 15 0
Settees, Couches and Chaise Longues
Small carved mahogany sofa, the arched back carved with
rococo motifs. Curved arms, carved seat rail and cabriole legs        135 0
some auction room prices ‘. 1968-69
Decorated satinwood cane-panelled settee with loose seat
cushion, 4 ft 4 in George III painted settee with flat rectangular back and arms,
on turned legs. The arms, seat rails and legs are painted
with husks and flowers on a cream ground, 6 ft wide Early George III mahogany settee with stuffed back and arms.
The seat rail and legs are carved with blind fret, 5 ft 8 in
wide, (some restoration) Victorian rosewood frame serpentine-fronted chaise longue on
short cabriole legs
Settles
Eighteenth-century oak settle, 5 ft 5 in wide Seventeenth-century panelled oak settle with box seat, 4 ft 6 in wide
Seventeenth-century carved and panelled tall-back hall settle, 5 ft 7 in wide
Sideboards
Small nineteenth-century sideboard inlaid with ebony lines. Raised back, the centre drawer flanked by a cupboard and deep drawer. Supported on six turned and tapering legs, 4 ft 8 in wide
Hepplewhite-style mahogany serpentine sideboard of rich mellow colour, cross-banded in kingwood and fitted with a napery drawer and cellaret cupboards with octagonal gilt metal handles and supported on chamfered

legs, 7 ft 2 in wide
Georgian mahogany half-moon sideboard with two cupboards to the sides and two drawers with lion ring handles in the centre. Four tapering legs, 4 ft wide
Large mahogany Sheraton-style sideboard fitted with two long drawers and flanked by two deep drawers, supported on tapering legs
Regency Empire mahogany sideboard of architectural form, with a reverse breakfront with two shallow drawers to the centre flanked by deep cupboards. Supported by two curved and four simulated bamboo legs

terminating in brass paw feet. The whole mounted with ormolu and brass griffins, lions’ masks and sphinx and with Adams-style garlands and patera, 7 ft 6 in long
Late Georgian mahogany sideboard with shaped front, the top back rail fitted with three tambour slides. Two cupboards and a centre drawer to the base over a waved apron. Supported on six slender tapering legs, 5 ft

7 in wide
Early nineteenth-century mahogany bow-front sideboard on spiral-turned legs, 6 ft 1 in wide
Tables—Break fast
Regency mahogany breakfast table with brass stringing on the banded top and a turned pillar ending in a reeded quadruped, 5 ft by 3 ft 5 in
Georgian mahogany oval breakfast table with reeded edge and
Tables—Card
Chippendale mahogany card table with shaped folding top on boldly carved cabriole legs ending in claw and ball feet, 2 ft 7 in wide 370 0
Late George II mahogany card table with border of carved flowerheads and legs and frieze carved with blind fret, 3 ft wide 250 0
Regency card table in figured rosewood inlaid with brass flowers and leaves, the D-top on a ringed stem and quadruple brass capped legs, 3 ft wide 190 0
Sheraton mahogany card table inlaid with satinwood lines and
on tapering legs, 3 ft 2 in wide 180 0
George II walnut card table with rectangular top on turned legs
with mantled knees and club feet, 3 ft wide 95 0
Regency mahogany card table with green baize interior on curving quadruple support, ending in brass claw feet. The top is cross-banded 65 0
Victorian mahogany card table with double Sap top supported
on four tapering shafts, terminating in curved legs 44 0
Tables—Centre
Regency painted centre tabic, the circular top simulating green marble, the border with brass mouldings hinged to a carved turned central support on a curved triangular base with lion’s paw feet, 4 ft diameter 120 0
Edwards and Roberts eboniscd centre table with ormolu beading on cluster column and quadruple base, 5 ft 6 in wide 38 0
Red Buhl shaped centre table with heavy ormolu mounts, two
drawers and on cabriole legs. (Poor condition) 11 0
Tables—Dining
Charles I oak dining table with a triple-plank top and the frieze carved with leaves and interlaced arcading, on column legs, 6 ft 5 in long by 2 ft 7 in wide 360 0
Large late George III mahogany dining table, the top richly carved with acanthus, ribbon motifs, satyr masks and a coat of arms. Supported on ten tapering spiral-twist legs with five loose leaves, 12 ft 4 in long 185 0
Georgian mahogany two pillar dining table with triple curving
legs ending in brass-capped feet 122 0
Georgian mahogany oval drop-leaf dining table on turned legs
and pad feet 75 0
Eighteenth-century mahogany oval drop-leaf cottage dining table
on taper legs with pad feet, 3 ft 6 in wide 44 0
Mahogany gadrooned oval dining table with cabriole legs and
claw and ball feet 40 0
Georgian mahogany drum library table with leather top and four real and four dummy drawers. On triple curving legs with brass-capped feet, 3 ft 3 in diameter 680 0
some auction room prices : 1968-69
George III mahogany library table fitted with seven drawers and dummy drawers with gilt metal lion ring handles, the top with gilt tooled green leather and the whole raised on a curved quadruple support with

brass-capped feet
Tables—Games and Sewing
Eighteenth-century mahogany, shaped folding top, games table on nutcracker frame with cabriole legs and claw and ball feet, 34 in wide
William IV games table with sliding and reversible top inlaid as a chess board opening to reveal a backgammon board with two drawers to the side. Central pillar supported on quadruple curving feet
Nineteenth-century mahogany sewing table with rising top and drawers below. The slender tapering legs ending in brass-capped feet
Tables—Gate-leg
George I elmwood gate-leg table, the oval top with flaps on
cabriole legs carved with scrolls and leaves and ending in
pointed pad feet, 3 ft 9 in wide Seventeenth-century oak oval gate-leg dining table with double
flaps supported on bobbin turned legs with plain cross
stretchers, 4 ft 9 in wide Late George II mahogany gate-leg table, the oval top with two
flaps, on unusual legs fluted and ending in paw feet, 3 ft 9 in
wide
Oak oval gate-leg table on turned underframe with drawer, 4 ft wide
Tables—Occasional
Late George II mahogany piecrust table with bird-cage support on fluted stem with carved legs and claw and ball feet, 2 ft 2 in diameter
Large mahogany piecrust tripod table with baluster stem and
pointed pad feet, 3 ft 5 in diameter Mahogany tripod table, the circular top with raised rim, on
cabriole feet, 1 ft 10 in diameter
Tables—Pembroke
Late Georgian mahogany oval Pembroke table with drawer, on
square tapering legs, 2 ft 7 in wide by 3 ft 6 in long Late Georgian mahogany Pembroke table painted with a floral
border and on turned and fluted legs Georgian mahogany Pembroke table with folding flaps and
single drawer, inlaid with satinwood lines and fan motifs, on
tapering legs, 3 ft 2 in wide
Tables—Refectory
Seventeenth-century oak refectory table of slender plain form, the base having square ends united by a single stretcher, 7 ft 3 in long
Oak refectory table on bulbous end supports with central
stretcher, 7 ft 7 in by 3 ft wide 130 0
An exceptionally long oak refectory table with triple curving
supports, 18 ft 6 in long, 3 ft 3 in wide 90 0
Tables—Side
Queen Anne banded walnut side table with two deep and two
shallow drawers on square legs, 3 ft 3 in wide 170 0
Chinese-Chippendale mahogany side table, the frieze carved with
blind fret. Moulded legs, 3 ft wide 88 0
Oak side table with drawer, on turned legs, 3 ft wide 64 0
Walnutwood side table with cabriole legs carved with acanthus
leaves 31 0
Tables—Sofa
George III satinwood sofa table cross-banded with acacia, fitted with two drawers and false drawers opposite on trestle supports with splayed curved feet and brass castors, 2 ft 10 in wide        750 0
Regency banded mahogany sofa table with tulipwood stringing with two drawers on end supports and central stretcher with brass claw feet, 5 ft 10 in extended 380 0
Late George III mahogany sofa table with two drawers in frieze and raised on flat trestle supports with out-curved legs, 3 ft 2 in wide 270 0
George III mahogany sofa table banded in rosewood and with two drawers. It has trestle supports with tripod splayed legs and brass feet, 3 ft wide 250 0
Tables—Sutherland
Mahogany Sutherland table on turned underframe, 2 ft 9 in
wide 42 0
Victorian walnut-veneered Sutherland table on turned supports,
2 ft 6 in wide 36 0
Tables—Tea
Regency mahogany tea table with folding top on a turned pillar and four curved legs, the whole inlaid with brass stringing, 3 ft wide 120 0
Late George II mahogany tea table, the top with a border of flowerheads and ribbon and the frieze and chamfered legs carved with Chinese blind fret, 3 ft wide 60 0
George III mahogany tea table with folding top, a drawer in
the frieze and square tapering legs, 3 ft 8 in wide 38 0
Tables—Wine
Hepplewhite mahogany wine table, the inlaid octagonal top
supported on triple concave curving legs 105 0
Victorian mahogany wine table on pillar and tripod base, 21 in
diameter 10 0
Tables—Writing
George III mahogany pedestal writing table, the gilt tooled leather top with three drawers at each side of the frieze and
the pedestals with cupboards and drawers at either end, 4 ft wide
Early eighteenth-century banded fruitwood writing table, fitted
with three drawers, a shaped apron and on cabriole legs with
pad feet, 2 ft 4 in wide Victorian lady’s mahogany writing table with two short drawers
on lyre end supports, 3 ft wide Carved mahogany writing table with fitted drawer, the top lined
with leather, on cabriole legs, 2 ft 5 in wide
Tallboys and Lowboys
George II walnut tallboy, the top with reeded and canted corners and three small and three long drawers. The base having three long drawers and bracket feet
Queen Anne small walnut tallboy of mellow colour, the upper chest fitted with two small and three long drawers over a brushing slide, and three long graduated drawers
William and Mary lowboy inlaid with scrolls and motifs. The top fitted with two small and two long drawers and two long drawers to the base, 4 ft 3 in high
Georgian mahogany tallboy with dentil cornice and two small and three long drawers to the top and tliree long drawers to the base which is supported on bracket feet
Georgian mahogany tallboy with dentil cornice, the top fitted with two small and three long drawers, the base with three long drawers and supported on bracket feet, 6 ft 1 in high
Waiters
Mid-Georgian mahogany dumb waiter with turned and carved columns supporting three trays. The whole on cabriole tripod feet, 4 ft high
George III mahogany dumb waiter with two revolving tiers and baluster centre on three curved and moulded legs and castor feet applied with roundels, 3 ft 2 in high
George II mahogany dumb waiter with three graduated revolving tiers and spiral fluting on turned central support. Plain cabriole legs, 3 ft 6 in high
Wardrobes
Mahogany breakfront wardrobe fitted with sliding trays, four
drawers and panelled cupboards Small Georgian mahogany wardrobe enclosed by two panelled
doors with three drawers in the base, 3 ft 9 in wide George III mahogany gents wardrobe with pierced swan-neck
cresting, a pair of doors banded in satinwood and two short
and two long drawers below, 7 ft high by 4 ft 4 in wide Regency mahogany wardrobe the upper part with sliding trays
with four drawers under on splay feet, 3 ft 11 in wide
Washstands
Late George III mahogany washstand, the top hinged and opening to form a back, the front with a pair of cupboard doors above one small drawer, on square splayed legs, 2 ft wide
Edwardian three-tier corner washstand with basin 18 0 George III mahogany corner washstand, the slender legs joined
by a stretcher with a drawer, 2 ft wide                                      14 0
Wine Coolers
Georgian inlaid mahogany sarcophagus wine cooler with lion
mask and ring handle on paw feet 65 0
Georgian mahogany octagonal wine cooler with lifting top and
short square moulded legs, 18 in wide 55 0

SOME AUCTION ROOM PRICES

FURNITURE
Bookcases, Bureau-Bookcases and Bookshelves
Sheraton mahogany bureau-bookcase, swan-neck pediment, 3 ft
3 in wide 1,650 0
George II walnut bureau-bookcase 650 0
Georgian mahogany breakfront bookcase, 7 ft  10 in wide,
7 ft 8 in high 450 0
Regency rosewood cylindrical swivel bookcase with shallow
pierced gilt metal gallery, 25 in diameter, 38 in high 284 0
Large Regency mahogany bookcase with dentil cornice, the upper part enclosed by four glazed astragal doors; the cupboards in the base enclosed by four doors with indented panels 160 0
Edwardian mahogany bureau-bookcase inlaid with ribbon, shell and urn motifs in satinwood. The top with swan-neck pediment with double-glazed astragal doors. The fall flap opening to reveal drawers and recesses.

Four long drawers below on bracket feet, 7 ft 5 in high 132 0
Georgian mahogany secretaire-bookcase, fitted adjustable shelving enclosed by glazed barred doors and cupboard below drawer, 2 ft 6 in wide 120 0
Georgian figured mahogany inlaid secretaire-bookcase, the upper part fitted with adjustable shelving, enclosed by glazed barred doors and fitted with two short drawers enclosed by panelled doors below, 4 ft wide 100
Small oak bureau-bookcase, the top with glazed astragal doors, the base fitted with a single drawer and double panelled doors, 5 ft 7 in high 95 0
A nineteenth-century mahogany bureau-bookcase with satin-wood lines. Top having glazed doors. Fall flap to base, which has four long drawers and is supported on bracket feet 56 0
Bureaux and Writing Cabinets
Early nineteenth-century marquetry inlaid cylinder-front bureau with pierced ormolu gallery, mounts and beading, having interior fittings, writing slide and three drawers, on taper legs, 3 ft 2 in wide 475 0
George III mahogany secretaire cabinet, the upper lancet panelled glazed doors above secretaire and panelled cupboard doors, 8 ft 4 in high, 4 ft 2 in wide 250 0
George II walnut bureau inlaid with boxwood lines. Interior having central well, drawers and recesses. Two small and two long drawers in base, on bracket feet 210 0
Eighteenth-century fruitwood bureau with three long graduated
drawers below the fall, on bracket feet, 3 ft wide 140 0
Georgian mahogany secretaire cabinet, the top drawer opening to reveal eight drawers and recesses inlaid with shell motif and a green baize writing panel. Three long graduated drawers to the base. The upper part

enclosed by panelled doors 95 0
Georgian  mahogany fall-front bureau having four drawers
under and on bracket feet, 3 ft 2 in high 70 0
Edwardian mahogany bureau-cabinet with pierced swan-neck pediment over glazed doors, sloping fall front over four drawers, bracket feet 66 0
George II oak bureau with fall flap and small drawers, two small and two long drawers below and supported on bracket feet, 2 ft 10 in high 60 0
Victorian mahogany bureau with sloping fall front over four
long graduated drawers, on bracket feet 58 0
Cabinets
Georgian mahogany bookcase cabinet with arched pediment surmounting astragal double doors. The base with double doors supported on bracket feet, 6 ft 6 in high 470 0
French display cabinet of Louis XVI design, mounted with ormolu female caryatids, the base with panels in the style of Vernis Martin, 3 ft 9 in wide 410 0
Regency mahogany display cabinet, the upper part enclosed by brass grilled and latticed doors, panelled cupboards to the base and supported on bold paw feet 290 0
Victorian walnut display cabinet in the Louis XVI manner, mounted with ormolu and inset with Sevres porcelain panels, two serpentine glass doors to the side and a door to the centre, 5 ft 1 in wide 126 0
Mahogany display cabinet of Chippendale-style with two glazed astragal doors below a swan-neck pediment and supported on cabriole legs and claw and ball feet, 5 ft 3 in wide 80 0
Canterburys
George III mahogany Canterbury with drawer in frieze on
tapering legs, 1 ft 7 in wide 130 0
George III mahogany Canterbury with turned legs 115 0
Georgian mahogany four-section music Canterbury with drawer
in base 85 0
George III mahogany Canterbury with slatted sides and ringed
legs, 1 ft 4 in wide 60 0
Chairs—Open Arm and Elbow
George II mahogany open arm chair in the French manner. Rectangular back and serpentine fronted seat. Arm supports and cabriole legs carved with rococo foliage and with scroll feet 150 0
George III mahogany open arm chair forming library steps,
the arm supports and curved stretchers with rope twist 150 0
Two early stick-back Windsor elbow chairs
Edwardian inlaid rosewood open arm chair with pierced splats
Chair—Dining Sets
Ten Sheraton-period mahogany dining chairs with cross rail backs and satinwood crestings on turned and reeded legs. Two carvers
Eleven Regency rosewood dining chairs with carved and reeded back rails, caned seats and on reeded sabre legs
Set of eight Regency mahogany dining chairs with padded backs, sabre legs. All are strung with brass, with brass carrying handles on the cresting rails
Set of two carving and six single Hepplewhite mahogany chairs with shield backs and pierced vase splats carved with wheat ears, on tapering legs
Set of six single and one carving Hepplewhite mahogany chairs with shield backs and pierced vase splats, supported on tapering legs
A composite set of eight eighteenth-century Dutch walnut dining chairs, inlaid with marquetry depicting floral bouquets, urns, scrolls and birds. Comprising one carving and seven single chairs
Set of six Sheraton inlaid mahogany single chairs with triple splat backs and stuff-over seats, on tapering legs
Set of nine mahogany dining chairs, one carver, in the Hepplewhite style with triple vase splats and drop-in seats
Set of two carving and six single Chippendale style mahogany ladder-back dining chairs with pierced serpentine splats and moulded legs
Set of six Regency mahogany reeded frame single chairs on sabre legs
Set of six William IV single dining chairs with leather seats and sabre legs
Set of two carving and four single Chippendale style mahogany chairs with carved and pierced splats and loose stuffed leather seats, supported on cabriole legs and claw and ball feet
Set of six Victorian walnut single chairs on slender curving legs
Set of six small Victorian walnutwood single chairs with oval backs and pierced scroll splats, on curved legs
Set of four Georgian reeded mahogany wooden seat hall chairs, crested
Set of six elm rush seat chairs with spindle backs Set of six Victorian single chairs with slender curving legs and damask seats
Set of four Edwardian mahogany shield-back single chairs inlaid
with satinwood lines and a fan Set of six Victorian mahogany balloon-back dining chairs on
turned legs
Chairs—Dining Single
Pair of George III mahogany dining chairs with moulded and rounded arched backs and pierced splats carved with foliage
and husk pendants. Upholstered curved seats on square legs
with block toes 50 0
Sheraton mahogany chair with stuff-over seat 17 0
Three early Victorian yew wood standard chairs 17 0
Pair of Victorian rosewood chairs on turned carved legs 5 0
Regency mahogany standard chair on reeded sabre legs 5 0
Chairs—Easy
George III mahogany wing armchair with an arched back,
shaped sides and chamfered legs 140 0
Early Victorian mahogany frame wing easy chair 50 0
Papier m&chi nursing chair with cane scat and inlaid with
mother-of-pearl 30 0
Victorian button-back nursing chair 29 0
Chests of Drawers and Commodes
Chippendale mahogany serpentine chest with reeded and canted corners and with four graduated drawers, on wide bracket feet, 3 ft wide 980 0
Chippendale mahogany serpentine chest, the canted corners pendant with clusters of fruit and flowers in bold relief, 3 ft 3 in wide, 2 ft 8 in high 620 0
Georgian walnut bachelor’s chest with folding top and four long drawers having brass handles and lockplates; supported on bracket feet, 29 in wide, 13 in deep, 32 in high 165 0
Eighteenth-century walnut chest of three short and three long drawers with tulip wood stringing on stand fitted with two short and one long drawer with cabriole legs and claw and ball feet, 3 ft wide 105 0
Small Georgian mahogany commode with fluted and canted
corners and fitted with two small and three long drawers 66 0
George III mahogany chest of two short and three long drawers,
3 ft 2 in wide 28 0
Chiffoniers
Regency mahogany chiffonier with three stepped shelves above with gilt metal sides pierced in the Chinese style, the fronts with rope twist mouldings. The lower section enclosed by two doors panelled with radiating

pink silk, 3 ft 10 in wide        150 0
Regency rosewood chiffonier, the single shelf at the top with acanthus supports. The single drawer to the front containing writing panel and fitted compartments. The whole with double brass rail and flanked by scrolled

acanthus supports        110 0
Coffers and Chests
Early Charles II oak chest of four panelled drawers with
panelled sides and bun feet, 3 ft 1 in wide 65 0
Late seventeenth-century carved oak coffer with a domed lid. The front carved with four arches and surrounded by stylised carving of leaves, strapwork and birds’ heads, 3 ft high, 5 ft 3 in wide 60 0
Early seventeenth-century carved oak dower chest, 3 ft 6 in wide
Seventeenth-century oak coffer with lifting top, the front panelled and carved in low relief with strapwork and foliage and the initials ‘HP,’ 4 ft 2 in wide
Cu pboards—Corner
Hepplewhite free-standing, serpentine-fronted mahogany corner cupboaid. Double glazed doors at the top enclose three display shelves. Base on square feet with double doors
Mahogany bow-fronted corner cupboard with glazed door enclosing shelves
Georgian standing corner cupboard with four panel doors enclosing shelves
George I blue japanned hanging corner cupboard with small open shelves above a pair of bowed doors. Decorated with chinoiseries, 3 ft 9 in high by 1 ft 11 in wide
Lacquer bow-fronted corner cupboard decorated in gilt with Chinese figures and buildings on a scarlet ground. The whole on cabriole-legged stand {not matching), 1 ft 10 in wide
Bow-fronted hanging corner cupboard with the door painted with King Solomon and the Queen of Sheba, 1 ft 11 in wide
Black lacquer bow-fronted corner cupboard with doors decorated with gilt Chinese landscapes, 1 ft 10 in wide
Davenports and Desks
Eighteenth-century partner’s desk in sabicu with tooled green leather top and fitted with eighteen drawers to the kneehole frieze, with rococo gilt metal handles; circa 1780
Queen Anne walnut kneehole desk crossbanded with fruitwood, with one long drawer and two tiers of three small drawers, 2 ft 5 in wide
George III mahogany tambour desk, the shutter enclosing fitted interior with leather-lined slope, pigeon-holes and drawers with two drawers below on square tapering legs with brass castors, 3 ft 1 in wide
Mahogany pedestal desk with leather-lined top and nine drawers around kneehole, 4 ft 8 in wide
Georgian mahogany Davenport with drawers and slide and with leather-lined fall and brass gallery, 1 ft 8 in
Victorian figured walnut Davenport with carved front supports
Dressers
Eighteenth-century oak dresser with three small drawers with brass handles and lockplates and cabriole legs ending in pad feet, 6 ft 2 in wide
Eighteenth-century oak dresser with three small drawers with brass handles over a waved apron, with cabriole legs on pad feet, 6 ft 2 in wide
Stuart-design oak dresser, the cupboards and drawers with geometrical raised panels with gilt metal drop handles
Oak dresser, the top with a shaped frieze, two cupboard doors
and three ihelvet over three moulded drawers to the base,
with cabriole legs, 5 ft 6 in wide, 6 ft 8 in high 105 0

Core-formed Amphoriskos, dark blue; marvered-in threads combed
to feather pattern; applied handles; Egypt, 1430-1340 B.C.
Ht. 08 mm (385 in.)
Core-formed Amphoriskos, dark blue; combed and marvered-in
threads; Eastern Mediterranean, 2nd-ist century B.C. Ht. 175 mm
(6-88 in.)
Cinerary Urn and burial goods, free-blown; slightly weathered;
Roman Empire, ist~4th century A.D. Urn ht. 213 mm (8-38 in.)
Bottle, pale blue-green clear glass, mould-blown in fish form;
possibly Western Roman Empire, 1st century A.D. Length 240 mm
(9-45 in.) 64
5. Jug in amber glass with weathering, mould-blown, bearing early
Christian symbols; Palestine, 578-636 A.D. Ht. 140 mm (5-5 in.)
6. Bottle in clear green glass, slightly weathered, with applied ’snake
trails’; Roman Empire, 2nd-early 4th century A.D. Ht. 181 mm
(7-13 in.)
7. ‘Dromedary’ Flask in clear yellowish glass, heavily weathered;
Syria, 6th-8th century A.D. Ht. 120 mm (4-7 in.)
8. Covered Daumenglas, clear green; with milled trails and applied
finger and thumb sockets; Germany, c. 1625-1650. Ht. 318-0 mm
(125 in.) 65
9. Covered Goblet in clear colourless and opaque white glass, in the
filigree technique; Murano, Italy, late 16th or early 17th century.
Ht. 369 mm (14-5 in.) (City of Liverpool Museums)
10. Vase in the millefiori technique, signed ‘E. Barovier,’ Murano, Italy,
late 19th century. Ht. 413 mm (16-25 “>•)
11. Beaker in pale straw-tinted clear glass, slightly weathered; enamelled
and gilded; Islamic, c. 1170-1270. Ht. 121 mm (4-75 in.)
12. Humpen, pale straw-tinted clear glass, enamelled and gilded with
Emperor and Seven Electors; Bohemia, dated 1625. Ht. 298 mm
(11 75 in.)
13. Beaker in clear colourless glass in Zwischengoldglas technique;
Bohemia, 1730’s. Ht. 79 mm (3-13 in.)
14. Glass Tile with gilding and black enamel, covered by protective glass
film; Syria, 6th-12th century A.D. 89×83 mm (35 X325 in.)
15. Covered Vase in clear colourless glass, engraved and gilded; made at
the Royal Glass-house, Spain, c. 1775-1800. Ht. 337 mm (13-25 in.)
16. Frigger; England, 19th or early 20th century. Ht. 458 mm (18 in.) 81
17. Buttle in pale green clear glass; linear and facet engraving; slight
weathering; Persia, 10th century A.D. Ht. 216 mm (8-5 in.)
18. Covered Goblet in clear colourless glass with Hochschmll engraving;
probably Silesia, early 18th century. Ht. 321 mm (12-63 ‘n¦)
19. Wine-glass in clear colourless glass; glass probably English, engraving
Dutch; Foot inscribed in diamond-point engraving: Jacob Sang, inv /
el fee I Amsterdam, 1759- Ht. 187 mm (7-38 in.)
20. Vase, clear glass with red flashing on inside, cased in opaque white
glass; engraved in cameo technique by George Woodall; Thomas
Webb & Sons, Stourbridge, England, late 19th century. Ht. 232 mm
(9 13 in.) 128
21. Bowl and Dish in clear colourless glass with cut decoration; Ireland,
c. 1825. Length 220 mm (875 in.)
22. Covered Goblet in clear colourless glass, diamond-point engraved;
Netherlands, late 17th century. Ht. 254 mm (10 in.)
23. Goblet (English) in clear colourless glass; Dutch stipple-engraving in
style of David Wolff”; late 18th century. Ht. 210 mm (8-25 in.)
24. Decanters with stoppers in clear blue glass; gilded decoration;
probably Bristol, England, early 19th century. Ht. 276 mm
25. Jug with pewter lid; opaque light blue glass, engraved and gilded;
made at the Royal Glass-house near the Palace of I.a Granja de San
Ildcfonso, Spain, c. 1775-1800. Ht. 270 mm (1063 in.)
26. Tea Jar in opaque white glass with enamelled decoration; South
Staffs., England, c. 1770. Ht. 143 mm (563 in.)
27. Covered Goblet in opaque white glass with enamelled and gilded
decoration; Bohemia, c. 1785. Ht. 279 mm (11 in.)
28. Small Bowl in black glass; I la ugh ion Green Glasshouse near
Manchester, England, c. 1605-1653. Ht. 32 mm (1-25 in.) 144
29. Beaker in Tithyalin’ glass with gilded cut inscriptions; made by
F. Egcrmann, Blottcndorf hear Haida, Bohemia, c. 1830. Ht. 108 mm
(425 in)
30. Covered Goblet in clear colourless glass with engraved decoration;
Nuremberg, 17th century. Ht. 445 mm (17-5 in.)
31. Posset Pot, in clear colourless ‘lead’ glass; raven’s head seal on spout.
.Made by Ravenscroft, London, England, c. 1677 + . Ht. 84 mm
(33′ >n)
32. Perfume Bottle, clear colourless glass; cut decoration and panels in
the ‘crystallo ceramic’ technique; made by Apsley Pell.itt at Falcon
Street Glasshouses, Southwark, England, after 1820. Ht. 140 mm
(55 ‘n) 145

MODERNISM
CHAIRS
AS FURNITURE PRODUCTION steadily
shifted emphasis from craft-based manufacturing to industrial methods, so the look of the chair changed dramatically Ornament was doggedly erased from designs as structure became more important to the aesthetic look. Solid wood began to fall from favour (too expensive and inflexible) as moulded plywood and tubular steel stepped into the spotlight.
Just as the notion of open-plan space was creeping into Western architecture, so furniture was freed from fulfilling just one function. Chairs became
increasingly ambiguous, with some made for indoor and outdoor use, and others equally at home in an office or dining room. Chairs became lighter, too, as they were frequently moved around the house.
With mass production in mind, designers began to concentrate their efforts on fixtures. The aim became
to produce a chair made of a minimum number of components that fitted together easily and quickly It’s no surprise, then, that the cantilever chair became so popular, as the continuous loop of legs and base eradicated the need for numerous nuts and bolts.
While the structure of the chair became increasingly celebrated in its design, as opposed to any stylistic conceits, so the designer as an
individual receded into the background. Industry became more important than art, as designers sought to express nothing more romantic than the manufacturing process.
The reason the chair dominated the focus of designers’ effort`_ is because a person’s emotional attachment is far greater to a chair than to, say, a shelving unit. If Modernist designers wanted to alter their audience’s emotional and intellectual outlook, it was through the chair that they tried to do so.
The slender armrests display a use of cushioning that is rare fora chair by Marcel Breuer.
The steel struts beneath the seat have been bowed so they cannot be felt by the sitter.
The chair is made from non-reinforced tubular steel, thereby making it less rigid.
B34 CHAIR WITH ARMS
The frame of this cantilever chair is made from one continuous loop of tubular steel. Although the base looks as though it is all in contact with the floor, the side pieces bend slightly so that only the corners touch the floor — the idea
being that most floors are slightly uneven and the smallest change in level would make the chair wobble. This chair has arms with elbow supports, and a blue canvas seat and back. Designed by Marcel Breuer and produced by Thonet. 1928. H:85cm (33Vzin); W.57.5cm (22Vain); D:63cm (24-Xin), Qu I
This armchair was inspired by a model made by Alvar Aalto. The chair’s seat and back are made from a single sheet of laminated wood and sit within an oak open-arm frame. H:76cm (30in) CA
LANDI CHAIR
This easy chair comprises a series of square-section planks of pine, joined by wooden dowels. It has a slatted section on both seat and chair back. Designed by Hein Stolle. c.1930. BonBay 2
SIDE CHAIR
The seat and back of this early cantilevered chair are made of ebonized moulded plywood and sit on a chrome-plated tubular-steel frame. The armrests are ebonized beech. Mart Stam for Thonet. c.1930. BonBay 2
ZIG-ZAG CHAIR
One of a pair, this chair has a tubular-steel frame reminiscent of Rietveld’s Zig-Zag chair. The wooden seat is supported on steel rods and has a later vinyl cover. H: 82.5cm (321in); W.41.5cm (161in); D:63.5cm (25in). Qu I
Lightweight and durable, this stacking chair is made from pressed and bent aluminium. Each armrest and pair of legs is from one piece of aluminium. Hans Coray. 1938. H: 76cm (290); W.51cm (19in); D:55cm (21in). BonBay 2
CLUB CHAIR
AALTO-INSPIRED CHAIR
EASY CHAIR
The rectilinear frame is made from stained pearwood secured with brass fittings. The chair is upholstered in hand-woven woolen fabric. Peter Keler, Bauhaus Weimar. 1925. H:69cm (27in); W.62cm (24V:ln); D:68cm (26%0). WKA
LOUNGE CHAIR
CANTILEVERED ARMCHAIR
One of a pair, this armchair has a tubular-chrome frame and seat with cushions upholstered in a dark brown, brushed fabric with red trim. The armrests are black-enamelled. H:86.5cm (34in). SDR I
Designed by Gilbert Rohde, this cantilevered armchair has a bright chrome base and black laminated armrests. The cushions are upholstered in ivory leather with a black trim. H:94cm (37in). SDR 1
THE STACKING CHAIR
STILL FOUND IN CAFES WORLDWIDE, THIS ICONIC DESIGN IS PERHAPS THE FIRST STACKING CHAIR, AND CERTAINLY THE FIRST WIDESPREAD DESIGN, OF ITS KIND.
The so-called Bistro chairs These have a pressed-steel frame and are painted red; with plywood seats. c.1926. H:82cm (32Vin). DOR 3
The origins of this chair, despite the efforts of numerous historians, have proved murky at best. The design is most likely to have been developed in France some time around 1925, specifically for the country’s booming cafe culture. The chair bears a strong, albeit rather crude, resemblance to chairs designed by Emile Jacques Ruhlmann, although it’s doubtful whether the French high-society designer ever had a hand in its conception.
What is perhaps most impressive about the chair, apart from its stackability, is its economy of materials. The steel used is incredibly thin and, to give the legs rigidity, the steel has been subtly curved. To save further on metal, holes have been cut from the seat back. While the perfect low-cost, space-saving chair was to become something of a holy grail for 20th-century furniture designers, few ever bettered the chair design that first set the ball rolling.
FREE SWINGER ARMCHAIR
The base of this chromed-steel cantilevered armchair from Austria is the only part of the structure that is exposed. The chair seat and back are filled with down and upholstered in sand-coloured velour. H:84cm (331in). DOR 3
LAMINATED LOUNGE CHAIR
This chair has been made from one sheet of cut and moulded laminated birch and resembles the Gerald Summers classic (see p.438). The arms are fixed to the back with metal brackets. Hans Pieck. 1944. H:76cm (30in). Bon Bay 4
BAUHAUS ARMCHAIR
This chair was designed by Erich Dieckmann for the Weimer Bauhaus, in collaboration with Ernst Mayo. Made from solid beech, it has a bowed back and slatted seat. c.1930. H:81.5cm (321:in); W.52.5cm (21in). WKA
DINING CHAIR
This is one of a pair of stacking birch plywood dining chairs that were produced by Artek. The chair has a circular wooden seat and a pierced plywood back, supported on L-shaped plywood uprights. c.1930s.
DIAGONAL CHAIR
This chrome-plated, tubular steel chair is named after the supports between the seat back and legs. The arms, seat, and back are of laminated wood. W.H. Gispen. c.1927. H:82.5cm (321-in); W-54cm (2111n): D:60cm (23,Xln). QU 2
SLATTED CHAIR
This Viennese chair has a tubular-steel frame and solid, stained-beech wooden slats for the seat and back. The arms have wooden armrests. One of a set of four. 1925. H:84.5cm (33V4in). DOR 3

Wall, Long Case and Table Clocks
Early domestic clocks—the development of the “grandfather” or long case clock—characteristics of case design—some famous makers —telling the age by dial and hands—introduction of white dials—effects of the Industrial Revolution—provincial clockmakers and cottage craftsmen.
The domestic clock was an exceptionally rare possession in the 16th century. It would be reasonable to say that before the Tudor monarchy it was unheard of in the English house. In the painting of Sir Thomas More’s family by Holbein, referred to earlier in the book, there is a clock to be seen hanging on the wall next to the dressoir. It is a Gothic clock of probably German origin and was the forerunner of the smaller brass lantern clock which was made only rarely in the British Isles towards the end of the reign of Elizabeth 1.
These early clocks were always weight driven, never went for more than 30 hours and were made to hang upon the wall. They were provided with a wrought-iron ring for suspending from a hook and two spurs at the lower part of the back of the clock to keep it in an upright position. The movements, sometimes referred to as the “works”, were governed by a balance wheel escapement, as the principle of the pendulum was not applied to clock mechanism until the middle of the 17th century.
Another type of clock which was produced in early times was the brass table clock and this also was an importation from the continent. It was constructed in the form of a square or round box, standing on small feet, the dial situated on the top in a horizontal position like a sun-dial. Consequently it was not possible to ascertain the time from a distance. The table clock was spring driven and while a few English examples were made during the 17th and 18th centuries, production ceased around 1770, apart from those later developed as chronometers.
Clocks in wooden cases, which are really the only kind to be included under the heading of furniture, did not appear until the Restoration, either as mantel clocks or in the form usually referred to as “grandfather”. Hitherto, clocks had not been very accurate time-keepers and were often as much as an hour fast or slow in a day. It was the adaptation for clockwork of Galileo’s invention of the pendulum by a Dutch scientist named Huygens in 1657 which allowed a considerable improvement in time recording to be made. This coincided with the introduction of wooden clock cases.
A young Londoner, John Fromanteel, had been apprenticed to a Dutch clockmaker at The Hague about this time. He learned the secret of making pendulum clocks and brought it back to England in 1658. The new controlling mechanism was known as a verge escapement and the pendulum used was quite short, being about 7 inches in length.
It was shortly after 1660 that the first grandfather clocks appeared in this country. The term “grandfather” is really of late Victorian origin and they were always referred to during the 17th and 18th centuries as long case clocks. Some writers on British horology have attempted to trace the development of the long case clock from the brass lantern type. It is true that after 1660 many lantern clocks were covered over with a wooden hood which had a glazed front. This hood was fitted to a bracket upon which the clock stood and the driving weight hung down on a rope below the movement. Presumably the hood was introduced to keep dust away from the mechanism.
The possibility of damage to the clock by clumsy servants, children or domestic animals interfering with the hanging weight would have been a good reason for its enclosure in a long wooden case. In this way the shape of the long case clock could have been developed. However, it is now well known that hooded and long case clocks both appeared at about the same time and, including the lantern clock, all three types continued in production until quite late in the 18th century. Long case clocks, of course, were made until the middle of Victoria’s reign and a few are still produced at the present day.
Mantel clocks appeared on the scene very shortly after the long case type. They were first known as table or bracket clocks, being designed to stand on a side table or wall bracket. It is seldom that a clock is found today with its original wall bracket. When people acquire these early table clocks they often stand them on a mantelpiece where they look far too big and out of place. It was only after the middle of the 18th century that smaller models were made expressly for the mantelshelf. Early table clocks had square brass dials and were housed in ebony veneered cases while those of the early 18th century had the arch dials of the period and walnut and mahogany were used for the cases.
The first long case clocks were of a very attractive size being quite small compared with those produced 150 years later. Because the pendulum was short and did not extend down into the case, the latter could be made comparatively narrow, often as little as 9 inches in width and very seldom over 6 feet in height. The more expensive clocks had ebony veneered cases and the hoods were designed in a pleasingly plain architectural style, usually with some gilded brass ornaments attached to the pediment and hood framework. The base was surrounded by a simple plinth. These very early long case clocks are exceedingly rare and when they do appear on sale the price is usually in the neighbourhood of £1,000.
During the next 30 years some important changes took place in long case design. Around 1670 a longer pendulum was introduced with a beat of one second. This was a purely English invention and was to revolutionise methods of accurate time-keeping. As the new 39-inch pendulum had an extended swing a slightly wider and taller case became necessary. By 1690 long case clocks had an average height of just under 7 feet and the width varied between 10 and 11 inches. The ebony veneered or ebonised pine cases of the earlier period must have appeared rather sombre when the clocks increased in size because the more colourful burr walnut veneer and flower marquetry cases had displaced them by the end of the century. The pediment on the clock hood was replaced with a carved cresting, pegged into the front edge of the flat top. This is rarely present nowadays as, being easily detached, it was liable to be mislaid during a removal of furniture. The hood, which hitherto had been constructed with a glass panel in front and which had to be lifted upwards when access to the hands was required, now had a glazed door fitted instead.
It also became the practice at this time to insert a little circular or oval window, known as a lenticle, in the door of the long case at the height of the pendulum bob. This was intended to show to an observer across the room that the clock was in motion. The gleam of the brass bob as it swung backwards and forwards could be seen clearly from a distance. Originally the lenticle was made of plain glass but in many cases this has been replaced with a piece of thick green glass commonly known as a bull’s eye.
Other features of long case clocks at the end of the Restoration were spiral twist pillars fitted to the edges of the hood door and a wide ovolo moulding placed immedia-tely below the hood. By 1710 this had been altered to a cavetto shape and the use of the ovolo moulding was never revived. Except in a few instances of country manufacture the small bull’s eye windows also became obsolete at about the same time.
Around 1720 long case clocks began to appear with dials surmounted by an arch. This necessitated a taller hood and the case was made higher still by the addition of a moulded or cushion top. The arch of the hood door was matched by a rounded top similar to the trunk door which hitherto had always been rectangular in shape. Cases were also becoming wider and 12 or 13 inches was not an uncommon size. Pillars were still attached to the hood doors but were no longer in the form of spiral twists, being usually plain or fluted columns with brass bases and capitals. During the next 80 years pillars ceased to be placed on the doors but remained free-standing on either side of the hood. A characteristic of Scottish clocks was the retention of the spiral twist pillars in a rather attenuated form until nearly the end of the century.
By 1765 clock cases had reached a height of 7 feet 6 inches or thereabout and had an average width of 14 inches. Mahogany was in general use and the long veneered case doors were often finely figured. While simple wainscot oak versions of the more elaborately veneered London clocks had always been made in the provinces many were now being made in the counties of Lancashire and Yorkshire which were cross-banded with mahogany.
London clocks still maintained a pre-eminence in good design during the latter half of the 18th century but many of the more northerly types were becoming very large indeed. Along with the other pieces of furniture whose design was affected by architectural influences, the broken pediment on the hood was introduced and this in turn developed into the swan-neck pediment. In some cases towards the end of the century the swan-necks became so debased in shape as to appear just like a pair of horns or ears protruding from the top of the hood.
During the early years of the 19th century some rather clumsy long case clocks were being made in the industrial north. Sometimes double sets of pillars appeared on either side of the hood and these on occasion lost any semblance of their architectural origin, becoming merely uninteresting turned spindles. The trunk door had gradually dwindled in size to a small, almost square trap, looking for all the world like the door of a small food larder. As a matter of fact, I have seen very attractive looking small cocktail cabinets, made to hang on the wall, which had been produced from the centre part of the trunks of these large clocks. The craftsmanship of early 19th-century cases was of the highest order but the overall design, generally speaking, was in very poor taste. Such clocks were portents of those monstrosities in furniture design which the Victorians, on occasion, were later to perpetrate.
One of the many interesting characteristics of the long case clocks was that in nearly every instance the name of the maker and place of manufacture were engraved upon the dial. Only in very few examples are clocks found to be anonymous. The earliest of the British clockmakers of whom records are known were probably Nicholas Vallin and Bartholomew Newsam who worked in London towards the end of the reign of Elizabeth 1. When James I came from Scotland to become king of England he brought with him a Scottish clockmaker, David Ramsay. The latter was a great clockmaker and became the first Master of the Clockmakers Company which was founded in 1631, during the reign of Charles I. The Stuart kings were all clock lovers and it was largely due to the enthusiasm of Charles II and his great interest in scientific matters that clock-making in England by the end of the 17th century had become pre-eminent in all Europe. All the makers already mentioned, however, were producers of metal clocks and preceded the era of the clocks in wooden cases.
Ahasuerus Fromanteel, a relation of that John who introduced the pendulum into British clockmaking, was one of the first names to appear on the dial of a long case clock. He was followed during the next 40 years by such famous makers as Edward East, Henry Jones, Thomas Tompion, Joseph Knibb, Daniel Quare and Joseph Windmills. The last I include in this list of the immortals for two reasons. In the first place, he is credited with the introduction of the arch dial in clock design during the first quarter of the 18th century and secondly, I am fortunate to possess a clock in a bird and flower marquetry case of around 1690 made by Joseph Windmills. He was made a member of the Clockmakers Company in 1671, the same year in which Tompion was elected, was Master in 1703 and retired or died in 1740.
There are several sources of information giving details of the early clockmakers such as G. H. Baillie’s Watchmakers and Clockmakers of the World; F. J. Britten’s Old Clocks and Watches and their Makers (Revised 7th Edition); John Smith’s Old Scottish Clockmakers and Iorwith Peate’s Clock and Watch Makers in Wales. So far there has not been a book written on the Irish makers but many of their names are included in Baillie and Britten.
While the general shape of antique clock cases will give an approximate idea of the period in which they were made it must be remembered that, as with all the furniture styles, what was fashionable in London for a decade continued to be produced in the provinces for another 20 or 30 years in many instances. The details of clock dials and hands, however, give a much closer date approximation.
Early dials were seldom more than 9 inches square but by 1775, 14 inches was not an uncommon size. Until the last quarter of the 18th century all dials had a chapter ring, which bears the hour numerals, and ornamental corner spandrels attached to the dial as separate items. Roman numerals were always used for the hours until after 1800 and above them were engraved Arabic figures. In the 17th century the Arabic numerals were about -51th of the size of the Roman but they were gradually enlarged so that by 1770 they were often irds of the size of the latter.
The spandrels were cast in brass and in early clocks were finely chased and gilded. Between 1670 and 1680 a finely modelled but simple cupid’s head was fashionable. By 1690 further decorative motifs were added to this pattern and around 1700 the cupid head design was replaced by a bearded mask or a maiden’s head surrounded by still more elaborate decoration. A theme of flowers in a vase with seashells was popular about 1740 and during the 1770’s the spandrels evolved into an arrangement of rococo arabesques without any realistic representation. In the north about this time there was a revival of the cupid head spandrel but it was much larger than the 17th-century version and appears rather crude when compared with the much finer castings of a hundred years previously.
All domestic clocks before 1660 had only one hand which told the hours and the quarters. More detailed time recording was not considered necessary in those far off and less complicated days. A minute hand was added to some movements early in the Restoration period and a second hand, called a second minute hand, about 1675. In the provinces, nevertheless, country clocks of 30 hours going duration and with only one hand continued in production even as late as 1780 or thereabouts. There seems to have been a dislike for change among the country people who preferred the older and simpler method of time-keeping.
This fact has proved very misleading to many clock owners who think that because a clock has only one hand it must be of an earlier date than 1700 at least.
White dials for long case clocks did not appear before 1775. The earliest were made of fine enamel but these are rare and very soon they were being produced with a painted front. Apart from being much cheaper to manufacture than the engraved brass dial there was the important fact that it was much easier to tell the time from a white dial. The engraving of brass dials towards the end of the 18th century had tended to be much too elaborate and what with hour, minute, centre-second hands and often a calendar indicator all pivoted at the dial centre plus a mass of engraving and over-elaborate spandrels, it became virtually impossible to ascertain the time unless one was standing very close to the clock. White dials for bracket clocks were introduced at the same time as those for the long case variety. In fact, the characteristics of hands, spandrels, chapter rings, etc, followed the same pattern for both types of clock.
The early years of the Industrial Revolution had a considerable effect on the production of clock dials and movements. Although the distribution of goods was still a very slow and arduous matter in the late 18th century, the pack-horse was capable of transporting clock dials, trains of wheels and most of the parts which went to make up a clock movement, to the most out-of-the-way villages in the country. For this reason there exists a marked similarity between late Georgian clocks although they may have been made over quite a large area of the country. The country clockmaker had, in fact, become a mere assembler of parts and no longer constructed the entire clock by hand in his own workshop as he had done earlier in the century.
A feature of 18th-century clockmaking was the very considerable amount of repetition work which was per-formed in the cottage homes of specialist craftsmen such as the clock-hand maker. In many cases their wives and children assisted in the work. Chains for fusee movements, the filing and gilding of spandrels after casting, the engraving of dials and many other particular processes were performed on a small bench at home and taken weekly to the master-clockmaker, who with his assistants would asaemble the movement.
The wooden long cases and also those for the bracket clocks were not made by the clockmaker but by an outside craftsman who specialised in the work. Thus it is that in some instances clocks made by well-known contemporaries like Tompion, Quare, Knibb and Windmills are found in cases which have identical marquetry designs and other features which indicate that they must have originated in the same workshops. Cases for country clocks were usually made by local joiners and like other examples of country-made furniture exhibit a certain naivety in their appearance.

Antiques: Furniture, Porcelain, Silver, Clocks Recently Featured at Antcollectors (6)

EARLY 19TH CENTURY
EUROPEAN INFLUENCES
THE RELATIONSHIP BETWEEN American, British, and French furniture in the early 19th century is complex and there is often no easy way to distinguish the origins of pieces. Although the United States was stylistically dependent on the Old World, it still produced some highly original makers, who adapted the Regency and Empire styles in much the same way as European countries diluted the French Napoleonic style. However, it is Sometimes only possible to confirm that a piece is American by analyzing the construction timbers.
The American interpretation of styles is best seen in the work of Duncan Phyfe and Charles-Honore Lannuier. Phyfe’s Scottish origin probably encouraged him to adopt Thomas Sheraton’s style initially.
Phyfe usually worked in Santo Domingo mahogany, palisander, or purpleheart. He went on to produce pieces in the Empire style before developing the Fat Classical style, which favoured sculptural decoration.
Charles-Honore Lannuier was French and settled in New York in 1803. Having trained in France, he brought with him the Louis XVI style, which evolved into an idiosyncratic form of Empire. His furniture is often difficult to distinguish from the French prototypes, especially as he used costly materials and probably imported gilt-bronze mounts from Paris.
Pattern books produced in Britain and France by Sheraton, Percier, and others disseminated European style to the United States more quickly than in the past, so trends were less delayed.

DIRECTOIRE BERGUE
This French armchair exemplifies the berg&e design. It has a high, curved back with a top rail sweeping forwards to form the armrests, which are padded to provide support for the elbows. The chair has a fully upholstered seat
and back, downswept arm supports, and a gently shaped seat rail. The upholstery fabric is not original. The frame of the berg6re is carved with leaves throughout and is raised on short, tapering, fluted legs to the front and splayed legs to the rear. The front legs are decorated with carved rosettes. c.1800.

AMERICAN TUB CHAIR
Like the curricula chair (left), this Federal mahogany armchair shares characteristics with the bergere: the upholstered seat, back, and arms, and the continuous line of the rounded back and arms. Early 19th century.

ENGLISH PEDESTAL SIDEBOARD
This mahogany sideboard has a raised shell and acanthus-carved, shaped back over four frieze drawers. The breakfront pedestals are carved with lion’s-paw feet and open on to shelves. They stand on plinth bases. c.1820.
AMERICAN PEDESTAL SIDEBOARD
This Classical mahogany sideboard mirrors the English version (above) having a leaf-carved, shaped backboard and pedestals on a plinth base. The rectangular top is stepped and sits above an ogee-moulded frieze fitted with drawers. c.1840.

This mahogany, boxwood, and ebony-strung card table has a rectangular, crossbanded, folding top above a plain frieze and ring-turned, tapering legs with brass casters. Early 19th century.
GEORGE IV CARD TABLE
ENGLISH CENTRE TABLE
AMERICAN CENTRE TABLE
AMERICAN CARD TABLE
Made of mahogany and bird’s-eye maple, this card table has rosewood crossbanding and a hinged top above a serpentine frieze. The ring-turned, fluted legs end in turned feet. Early 19th century.
This rosewood table has a circular tilt-top with a plain, crossbanded frieze. It has an octagonal spreading pedestal and a concave triform base with scrolling paw feet. Early 19th century.
This Empire table has a circular rope-carved top with a plain frieze and a floral carved and gilded pedestal. The base and feet are almost identical to the English example, left.

AMERICAN SECRETAIRE
This Classical-style secretaire a abattant has a marble top and a frieze drawer flanked by figural mounts. The drop front sits above cupboard doors. Early 19th century.
FRENCH SECRETAIRE A ABATTANT
This Empire-style, mahogany tall chest has three drawers above a pair of cupboard doors. The case is flanked by tapered pilasters topped by gilt-metal female busts. Early 19th century

AMERICAN SOFA
This elegant American sofa has a similar shaped and carved top rail and outscrolled arms to the Regency sofa (see left). The back, arms, and seat are upholstered and raised on a leaf-carved seat rail. The sofa is supported
on elaborately carved legs that terminate in paw feet. Compared to the Regency example, this sofa is proportionally more bulky.
ENGLISH CELLARET
The rectangular hinged top of this mahogany cellaret encloses a divided interior. It is supported on a rope-turned plinth and raised on ring-turned brass caps with casters. Early 19th century.

AMERICAN CELLARET
This inlaid cherry-wood cellaret, on a stand, has a hinged lid and compartmentalized interior. The cellaret stands on square-section, tapering legs. Early 19th century.
REGENCY SOFA
This mahogany Regency-style sofa has a framed scrolling back and outscrolled arms with reeded, mahogany fronts. The squab cushion and bolsters are supported on a reeded seat rail with bead-and-reel moulded tablets.
The sofa is supported on splayed, reeded legs with leaf-cast brass caps and casters. The splayed legs are particularly susceptible to damage. Early 19th century.

Lamps & Light Fixtures
Electricity was available to many American homes during the years between the First and Second World Wars. Electric lamps became an important part of the home furnishings market. Businesses such as department stores, offices, restaurants and theaters were another large sector of the economy in need of modern forms of light fixtures. Lighting manufacturers catered to both markets, parlaying topical Deco themes into various forms of light.
Floor lamps and table top lamps are both quite collectible. Selections may be elegant and high style or simply low camp and amusing. Lamps are not only ingenious relics of Deco design but they are also functional. Collectors should check the electrical wiring, however. Many still have the original cords which may be frayed or split, but rewiring is not too expensive. It is well worth the effort to have lamps repaired so that they can be displayed to full advantage. Rewiring does not detract but rather adds to the lamp’s value.
Floor lamps supported widely flared shades or globes. These reflected the light upward and torchere has become the name associated with that particular style. The shades were made of frosted or opaque glass or out of metal such as brass or chrome. This same type of lamp is now frequently reproduced to complement new Deco style furniture. Other Deco floor lamps had conventional parchment or silk shades with the “modern” look showing up in the stems and bases.
Figural table lamps are very much in demand. Both French and American companies made numerous vanities aimed at the middle class market. Women, nude or semi-nude, were fashioned in various stylized poses such as dancing, kneeling or with arms stretched high in the air. The light globe was positioned to the side or behind the figure or even rested in the figure’s hands. These lamps were decorative objects, designed to cleverly disguise the source of light.
Although this type of figural lamp was made in bronze, most of the ones found today were made of metal alloys. The finish may be bronze colored or painted red, black, green and so forth. Because the paint wears and chips over time, it is not uncommon for the lamps to be repainted, especially for resale. But lower prices should be reflected if that is the case, Globes on these lamps, because of their fragile nature, often have been replaced as well. It goes without saying that the most desirable lamps are those with all original parts and finish.
Regarding prices, the French figural lamps are the most expensive, and it is not uncommon for these to cost $1,000 or more, outsided the range for the moderate collector. While American specimens are considerably
less costly, it is still rare to find an all original one for less than $100. Those not in working order and needing repairs are about the only ones which might be bargains The Frankart Company, located in New York City, was probably the most prolific manufacturer of metal figural Deco items. Frankart lamps, like their other products. have become increasingly popular. Consequently, prices continue to rise, ranging from $200 to $600.
Ceramic and glass Deco lamps were also made figural designs. One ceramic lamp shown here, made by  Van Briggle, is a finely executed piece of American a– pottery. The boudoir lamp with the nude glass globe is a mass produced piece imitating the Lalique style. Other- ceramic lamps portray a Deco influence by their hand painted body decor in geometric or stylized configurations. Glass lamps may feature similar Dec: characteristics in either the body or the shade as lustrated in some of the photographs.
Deco light fixtures designed for commercial ente– prises can be turned into attractive lighting for homes. Torchere or conical shaped wall sconces adapt to baths. halls and bedrooms while cascading chandeliers an– other large fixtures can be used to light entrance foyers or porches. Shops specializing in architectural antiques may offer some interesting examples. Most commercial fixtures were made of bronze, brass or even cast iron. and these have survived the years quite well. Shapes are unquestionably Deco!

Smoking Accessories
The cigarette, like the cocktail, became a mark of sophistication, one of the “in” things during the Deco years. To smoke (and drink) showed one was in step with the “modern” world. This was especially true for women as they shed the forbidding Victorian rules dictating “proper” conduct. More and more women began to smoke in public just as they shortened their hemlines and bobbed their hair.
A number of interesting smoker’s items were made which were either desirable or necessary accessories for those addicted to the habit. For example, ashtrays were indispensable. Both table top and free standing varieties became common fixtures in the home. Most were made of metals such as brass, copper, bronze and chrome but glass and ceramic ones were also prevalent. The ever popular nude figures sometimes were incorporated into the design. Two shown here include a rather simple table top model and an elaborate floor style.
In conjunction with ashtrays, “silent butlers” became an appropriate household item. The name was an apt description for this receptacle fitted with a long handle and hinged lid. For those who had no real butler, these were handy gadgets for emptying overflowing ashtrays at one’s party or cleaning up the stale remains the next day! They were usually made of chrome, brass or frequently hammered aluminum. The latter type, however, do not always fit the Deco image even though they are from the period.
Cigarette holders cover a broad category of smoking collectibles. In fact, the term “holder” can have several different meanings when used in connection with cigarettes. Table top holders refer to open or covered boxes for keeping a convenient supply of cigarettes. These were made as individual containers or as a combination piece with space for cigarettes and matches and even an ashtray. The boxes were also often part of a matching set of separate pieces.
Another type of holder was the cigarette dispenser. These are novel items and a good example of the “purely fun” side of the Deco years. One of the dispensers shown is a “pop-up” type, operating with a spring device. Cigarettes encased in metal holders pop up when the lid is removed. Another has concealed push buttons on two sides. When pressed, the hinged lid opens, revealing individual spaces for cigarettes. A third type of dispenser has a roll-top. When it is pushed back, a tray slides out offering five cigarettes.
The term cigarette holder, however, is perhaps most commonly associated with the individual holder. While these were designed for keeping the cigarette from direct contact with the mouth, they were also used for effect, to impact a chic or debonair look! The holders shown here
range in length from two to six inches. They are made of plastic, tortoise shell or celluloid.
Art Deco cigarette lighters comprise still another group of smoking accessories. Collectors are interested in both the table top and the pocket or purse varieties. Most of the pocket lighters have masculine overtones. Of course, it was the custom for a man to light a woman’s cigarette. Two lighters shown here with floral decor appear strictly feminine, however. One, in fact, is a combination compact and cigarette lighter.
The “bar-tender” lighter is probably the most coveted of the table top models among Deco enthusiasts. Several variations of the type featured here were made by different companies such as Ronson and the Art Metal Works. Some functioned as a cigarette dispenser as well as a lighter. Although they were made as novelties, these rather scarce items fetch hundreds of dollars today.
Incense burners are included in this section. They may be used to mask tobacco odors, and they are complementary in a decorative scheme. Other tobacco related Deco collectibles include cigarette and cigar cases, cigar clippers and cutters, pipe stands, tobacco jars and humidors. Beware that general collectors of tobacciana make the market quite competitive.

Vases
Vases are designed for displaying floral arrangements, but as solitary objects they enhance a room’s decor. Instead of being merely flower containers, they are considered art objects or decorative accessories, depending on their price. Like table wares, Deco vases were made of either pottery, porcelain, glass or metal. The photographs in this section are arranged in that order.
French art glass vases are the most expensive. Examples shown here include pieces by Legras, Schneider and Verlys. Other French manufacturers such as Baccarat, Lalique and Galld perhaps are more famous. But as their creations have become scarce and very costly, other factories’ products have gained recognition. Consequently, most French art glass has moved entirely out of the range of the moderate collector.
For Deco image, however, less expensive vases made by European and American factories are quite pleasing. Much of this glass is unmarked and not attributable to any one factory. Lack of identification may serve the collector well when Deco shape rather than company or artist is the major concern. Czechoslovakian glass made between 1918 and 1939 has been gaining interest among Deco collectors for several years. Most of the pieces are marked “Czechoslovakia” or “Made in Czechoslovakia.  The shapes and vivid colors of this good quality glass are quite representative of the Deco era. Prices usually remain moderate. Black milk glass or black amethyst glass made during the 1920’s and 1930’s is another type of relatively inexpensive glass with Deco overtones. Black glass was made by several American factories, but most pieces are unmarked.
American glass makers such as Cambridge, Fostoria, Heisey and New Martinsville, to name a few, are noted for stemware and serving dishes, but vases and other decorative items also were produced by these factories. Clear and colored glass vases were sometimes made to match the modern table ware patterns. Fan shapes, blocked geometric forms and even etched nude designs project a Deco theme. Although this type of glass is avidly collected by Depression glass collectors, prices are far less than those for French art glass.
The most expensive ceramic vases are those made by European art potteries. Art pottery, however, usually is priced lower than art glass. This is apparent when prices are compared for the Amphora and Boch Freres ceramic vases with those for the Legras and Verlys glass examples. American art pottery is generally lower in price than European. Among American Art potteries, attention is being paid to the Deco production made by companies such as Roseville. Less expensive vases are Japanese or American pottery varieties which were sold by dime stores or florists’ shops. The angular white glazed Japanese vase shown here was originally cheap, but the striking Deco shape has caused its current value to increase sharply.
Porcelain vases are medium priced with few being either bargains or exorbitantly high. Porcelain is superior to simple pottery because it is stronger and translucent, but those qualities are not always reflected in prices. Most European porcelain vases are less expensive than European art pottery. The reason is because many decorative items such as urns, vases and jardinieres were produced in quantity by porcelain factories. Moreover, they were often decorated with transfer designs or exported as undecorated vases. The latter were purchased by aspiring amateur china painters, and thus the decoration is not as creative or professional as that of art potteries.
Metal adapts well to angular shapes. Although glass and ceramic vases are more common, those made of brass, bronze, copper or chrome often evoke the Deco image in a more eye-catching way. The chrome vases pictured here are priced at the low end of the scale, but the Deco features are quite obvious. Brass and copper vases vary in price depending on size, but most are over $ 100. The sterling on bronze vases were made by the Heintz Art Metal Company. Such pieces are rarely less than $100 or more than $300. French bronze vases may be out of an affordable price range for moderate collectors. But an urn like the one shown, or similar vases, is usually considerably less than a bronze statue would cost. If French bronze would lend a note of prestige to one’s collection, such vases are a good choice.