Posts Tagged ‘bulkier’

Antique Sofas After 1840

Thursday, May 14th, 2009

Settles and sofas after 1840
The revival of interest in historical styles from the mid-19th century resulted in a multiplicity of designs for all types of furniture, including sofas, which were often made as part of the new salon or parlour suites. A major technical development during this period was use of the coil spring, patented in 1828, which resulted in sturdier, bulkier, and squatter designs that sacrificed form to comfort. These deeply upholstered seats, with their button backs, culminated in the Chesterfield, which was the first fully upholstered sofa.

Seat furniture
The period c. 1860 to (.1880 was in many ways the golden age of upholstery. Stuffing had been growing steadily thicker from the 1840s, and buttons were introduced to prevent the thread holding the stuffing
in place from pulling the covering material. Extra fabric was necessary to create the familiar diamond pattern of buttons or threads characteristic of the deep, luxurious upholstery, with its air of prosperity and comfort, so admired by the Victorian middle classes. The development of the coil spring made increased demands on buttoning. Whereas sofas had previously been stuffed with layers of wadding and horsehair, coiled metal springs were now used. The springs were supported by a layer of hessian webbing, covered with more webbing, which in turn was covered with horsehair stuffing and padding. As a result, Victorian sofas were much more comfortable than early 19th-century examples, but they were also much bulkier; many sofas had button backs to emphasize the new upholstered look. The luxurious effect was emphasized by the use of velvet and other elaborate fabrics. Sofas with their original worn upholstery arc more collectable today than those with high-quality restoration using an inappropriate fabric.
French sofas were generally lighter in design than British examples, since French craftsmen and manufacturers employed such revival styles as Rococo and Louis XVI, making use of giltwood and lighter upholstery fabrics. In the USA, parlour suites on a grand scale were produced by such leading makers as John Henry Belter (1804-63) of New York, who in the 1850s created laminated and moulded rosewood sofas with deep pierced carving. Renaissance Revival suites, with square-backed sofas, were also popular, while the fashion in Europe and the USA for “Turkish” corners gave rise to over-stuffed upholstered sofas with elaborate fringing.
Edwardian sofas of the first two decades of the 20th century borrowed heavily from Neo-classical styles –especially the designs of Thomas Sheraton (1751-1806) – and from Regency styles, but managed to avoid the excesses of Victorian interpretations. Suites of chairs with matching sofas were produced; these were generally made from mahogany, or occasionally from walnut or satinwood. Sofas and chairs often had caned backs and sides, with silk or damask upholstery.

•    CHALSES-LONGUES these are not particularly commercial as they can be large and not very comfortable to sit on; examples with good shapes are more popular, as are those that are more heavily carved
•    GILDING good-quality regilding is quite acceptable if well executed– the highlights should be burnished, and the quality of the carving evident; beware of spray gilding – this will have a flat, matt appearance, with a very even coverage
•    RE-UPHOLSTERY the condition of the upholstery should be carefully examined, as seating can be very expensive to re-upholster; furniture with taut webbing is
preferable to that with springing, which tends to give an overstuffed look
•    COLLECTING many sofas and settees were originally part of parlour or salon suites, which are now rarely found complete; three-seater examples are generally more commercial than two-seater