Posts Tagged ‘bureau plat’

Early 19th Century Desks: CANADIAN DROP-FRONT DESK, GERMAN PEDESTAL DESK, FRENCH CLERK’S DESK, BIEDERMEIER CYLINDER BUREAU, FRENCH DIRECTOIRE CYLINDER DESK, AMERICAN FEDERAL DESK

DESKS GENERALLY TENDED TO BE Of two
forms: flat- or slant-topped. Neither of these types were new in the early 19th century. Of the former, which were generally intended for a library, several outstanding examples survive. The Jacob brothers of France provided Napoleon with a flat-topped desk for his study at the Tuileries, which is now at Malmaison. A type of mechanical bureau plat, the box-like top slides back to expose the working surface. It is supported on side pylons formed from paired lion monopodia painted and gilded to simulate bronze.
A late Empire “Ferdinandino” style desk in mahogany survives in the Spanish Royal Palace in Madrid. With a leather top, which is typical of flat-topped desks of the period, it is supported on gilt swans linked by a platform stretcher. Chippendale the Younger’s desk for Sir Richard Colt Hoare at Stourhead demonstrates a British variation of this type. Unusually,
the top of the desk is rounded and has Egyptian mask pilasters running around all sides.
Slant-fronted bureaux were still produced, particularly in provincial centres in Britain and the United States. The cylinder bureau, which had a rounded fall that pushed upwards into the carcase of the piece remained popular on the Continent, particularly in the north. The cliatol in Denmark was a variation with a cabinet above it. Similar bureau-cabinets were produced in Britain, as was a much smaller desk called the Davenport. In some instances the slant provided the actual writing surface rather than covering it, while others were made with a piano-top style. They are thought to be named after a version made by Gillows for a Captain Davenport. Other small desks, , were in vogue on both sides of the channel. The secretaire a abottant continued to be popular, especially in France.

The ebony inlay takes the form of leaf sprays and geometric motifs.
Each side panel hasa lion’s head brass ring pull.
The frieze has three drawers.
Arched bracket lion’s paw foot.
ENGLISH REGENCY DESK
This shaped rectangular pedestal desk has a black gilt-tooled leather writing surface and is decorated around the edges with ebony inlay depicting sprays of leaves and geometric motifs. The frieze has three drawers to the front above
a kneehole, flanked on either side by a door enclosing three drawers. The reverse of the desk has three conforming frieze drawers and cupboard doors enclosing a shelf. The case stands on eight arched bracket lion’s-paw feet.
c.1820.

AMERICAN SLANT-FRONT DESK
This Federal maple and tiger-maple slant-front desk from New England has a moulded slope front with a fitted interior and four long graduated drawers. There is a moulded base and the case sits on French feet. The secondary wood is white pine. c.1800.

FRENCH DIRECTOIRE CYLINDER DESK
This roll-top desk has a white marbled galleried top above three frieze drawers. The panelled fall opens to reveal a fitted interior with small drawers and a leather-inset brushing slide. The desk is raised on turned, tapered legs, ending in toupie feet. c.1800.
ITALIAN LIFT-TOP DESK
This desk has a lift-top with iron strap hinges and lock that folds back to reveal a fitted interior. The desk is supported on canted, scrolled ends with carved supports. Early 19th century.

AMERICAN FEDERAL DESK
The slant front of this Federal cherry-wood clerk’s desk encloses a fitted interior of four drawers and valanced compartments on both sides of a central, shell-carved, prospect door flanked by two document drawers. Below is a single long drawer. Early 19th century.
SWEDISH PAINTED DESK
This is a late Gustavian painted desk, with a wide overhanging rectangular writing surface above three reeded frieze drawers. Each pedestal has three graduated short drawers, again reeded, and is raised on a narrow
plinth with block feet. 1800-20.
BIEDERMEIER CYLINDER BUREAU
FRENCH CLERK’S DESK
This German walnut-veneered cylinder desk has a frieze drawer above the roll-top and two long drawers below. The front opens to reveal a fitted interior with six small drawers and compartments. The case is supported on square-section tapering legs. c.1820.
This mahogany desk has a three-quarter gilt-metal gallery and a leather inset slope. There is a gilt-metal mounted frieze with a drawer above a grille door and sides with folio divisions, flanked by turned columns. The desk is raised above a platform with square supports on bun feet.

GERMAN PEDESTAL DESK
This pedestal writing table is covered with cherry wood veneer. The rectangular top has a higher, moulded edge to the back and sits above one long and two short frieze drawers with locks. Either side of the kneehole, the
deep, rectilinear pedestals have unusual tapered doors with applied moulding above, which give the piece an architectural feel. The interiors of the pedestals are fitted with shelving. The whole piece is supported on a plinth base. c.1825.
CANADIAN DROP-FRONT DESK
This rare Quebec pine desk has a fall front, which opens to reveal a fitted interior. On either side of a central cubbyhole are three wide, graduated drawers, and above it is a series of pigeonholes. The case has three long
drawers and is supported on a moulded plinth. The exterior of the desk has been stripped, but still bears traces of its original paint finish. c.1820

NAPOLEON CROWNED HIMSELF Emperor
in 1804. From this date until his abdication in 1814, and final defeat by Wellington at the Battle of Waterloo in 1815, he dominated the European scene. Moreover, his taste, and the Empire style that he cultivated, became omnipresent in Europe.
Already emerging before 1804, this austere style sought to associate Napoleon’s Empire with the glories of ancient Egypt and ancient Rome. This aim manifested itself in an almost archaeological interest in Classical motifs, promoted by Perrier and Fontaine, whose Recueil was
The frieze is decorated with
a central gilt-bronze rosette,
flanked by palmettes.
The protruding columns
have gilt-bronze
capitals and bases.
republished in 1812. The light style of furniture that prevailed before the turn of the century was now transformed into a truly imperial idiom in keeping with Napoleon’s despotic tendencies.
EMPIRE MOUNTS
Neoclassical influences are evident in the ubiquitous bronze dore mounts on Empire furniture: griffons, lions, and sphinxes abound. Martial motifs were especially popular, such as trophies or crossed swords. Some of the best-quality mounts were produced in the
workshop of Pierre Thomire. His mounts appear on furniture by Beneman and Weisweiler. Other Beneman pieces are known to have similar, high-quality applique details made by Antoine-Andre Ravario.
EMPIRE MAKERS
The dissolution of the Guild of Joiners and Cabinet-Makers in 1791 meant that craftsmen could now establish workshops comprising several trades in a single location. The workshops of the ancien regime were quick to
re-open after the Revolution, seeking a wider, often middle-class, clientele, who were sometimes less demanding. Some feared that this might lead to a decline in quality French furniture. However, the finest pieces, made for the Emperor and his circle, reveal the same technical brilliance as items produced in the previous century. Many of the great ebenistes had previously worked for Louis XVI, including Bellanger, Benenian, Georges Jacob, Molitor, and Weisweiler. It was also a period of great productivity between 1810 and 1811, as much as 17,000 francs was spent on furniture for Imperial residences, and half a million francs went to Georges Jacob Desmalter alone for furniture made for the Palais des Tuileries. There
were 10,000 workers involved with furniture production in Paris during the first decade of the 19th century, making pieces for both the local and export markets. Jacob-Desmalter
employed at least 88 workers, some at his Porte Saint-Denis workshop.
Upholstery and drapery sometimes overpowered the Empire room. Ceilings could be tented in strong, usually striped, colours (blues, reds,
The Empire style was born from a merger of art and political aspirations in a heady, post-Revolution atmosphere upheaval. It was
greens, and yellows) to echo tented military accommodation. The embroidered patterns on chair upholstery were both large and bold.
NOVEL FORMS
Several novel forms also appeared. The lit en bateau was very fashionable, often with scrolled ends, raised on a dais, and draped in fabric. It was similar in form to the recamier, or day bed, and the meridienne, a type of sofa with scrolled ends, one higher than the other. For middle-class homes, the less expensive lit droit was popular; it had a headboard under a triangular pediment. For the first time,
bedrooms were furnished with a Psyche mirror, or Cheval glass. The small, round gueridon, or candlestand, served a variety of functions, and sometimes had metal legs, patinated green to simulate ancient metals, possibly set with a porphyry top.
The commode slowly became more functional and occasionally the drawers were set behind doors. Chairs were often supported by Grecian sabre back legs, and had either rectangular or over-scrolled backs. Usually the
arms were supported on human or swan forms. Empress Josephine’s dressing room at Fontainebleau probably houses the most famous Empire chairs – those with a curved back en gondole.
Finally, there were various furniture forms for writing, from the box-like secretaire d abattant (and its relative the secretaire de compiegne) to the bureau plat, which assumed grand and monumental proportions under the Empire.
ARMCHAIRS “AUX TETES DE LION”
are made of mahogany. Each has
rectilinear back, an upholstered seat
and armrests, upholstered seats are
on sabre legs, with those at the front
terminating in lion’s-paw feet. The chairs are attributed to the maker Jean-Baptiste Demay of Paris. Although lion’s masks appear frequently on British furniture of the period, they are a
relatively unusual feature on French Empire pieces. 1805
This fine-quality flame-veneered tric trac, or games, table has a removable writing table top with inset brass corners and a baize playing-card surface on the reverse. Each side has one false drawer and one drawer for playing pieces. The table stands on square, tapering legs terminating in brass casters. c.1810.

Trays, knife-boxes, cutlery-urns, wine coolers, cellarets, and buckets
TRAYS
Known as “voyders” in the Middle Ages, and conceived not only for clearing away but also for the presentation of delicacies and sweetmeats, the earliest utilitarian trays were probably made of pewter and wood. During the late 17th century lacquered trays imported by the East India companies and European japanned versions revolutionized tray designs. The fashion for tea in the early 18th century was directly reflected upon all of the component parts of the tea ceremony.
Modest trays in oak and elm also survive from the early 18th century, and from the 1750s mahogany trays first appeared in pattern-hooks. Thomas Chippendale (1718-79), in the first edition of The Gentleman and Cabinet-Maker’s Director (1754), included four designs for trays in the Chinese style with carved fret borders. However, this type is very rare, and Chippendale also supplied designs for plain rectangular trays. From the 1780s trays became increasingly decorative; they were made in mahogany, and other exotic timbers, were sometimes richly inlaid with shells, fan-parquetry, and foliate arabesques of stained fruitwood, or were painted. Late 18th- and early 19th-century trays were dominated by the fashion for japanning, particularly in papier-mache. A process long practised in Persia (now Iran), it was patented in 1772 by the firm of Henry Clay, in Birmingham, and later by Jennens &, Bettridge (active 1816-64) in London. Although papier-mache trays were often of scalloped form, rectangular trays with similar decoration were also fashionable, particularly those of tole peinte or polychrome-painted metal.
KNIFE-BOXES AND CUTLERY-URNS
Supplied in pairs as ornamental containers for silver and enamel-handled cutlery and designed to stand prominently on the serving table, knife-boxes came into fashion during the reign of George II ( 1727-60). Although the basic form, with a serpentine front, remained remarkably unchanged until the 1780s, George 11 knife-boxes were often ten covered with silk-velvet or shagreen, rather than veneered. From the 1760s knife-boxes in mahogany were made and are characterized by their bow-fronted form, hinged slope with drop-handles, and shaped bracket or claw-and-ball feet; they are unembellished apart from the cockbeaded or chequerbanded edges. The interiors, with slopes pierced with holes to display the cutlery in tiers, were also often silk lined but otherwise restrained. During the 1770s their decoration became increasingly lavish, with crossbanding and featherbanding, ebony-inlaid star parquetry to the slopes, and even stylized green-stained shell inlay – a motif particularly identified with North Country workshops – while the feet were discarded altogether in favour of Classical plinths. With the age of satinwood ( 1780-1800), elaborate Neo-classical embellishments became commonplace, and these were often complemented by richly engraved Sheffield plate Mounts. During the 1780s the vase-form knife-box, published by George Hepplewhite (d.1786) in The Cabinet-Maker and upholsterer’s Guide ( 1788-94), was designed to stand either set at each end of the sideboard or on pedestals. Made of satinwood or other light woods, the most refined examples were painted or inlaid with Neo-classical marquetry, arabesques, and simulated flutes, while the spring-loaded lids opened to reveal a chequerbanded interior with concentric tiers for the display of cutlery. During the early 19th century, knife-boxes and cutlery-urns became increasingly redundant both by sideboards with fitted drawers for storage, and by cutlery-urns being affixed to pedestals.
WINE COOLERS AND CELLARETS
As wine was an expensive luxury, receptacles for cooling and storing wine – whether of open-topped cistern (wine cooler) or lidded cellaret form, fitted with a lock, with divisions for bottles –were often lavishly decorated. Although metal and marble cellarets were first recorded in Britain in the late 17th century, it was not until the mid-18th century that lead-lined mahogany examples carved in the Rococo taste were made. Perhaps the most celebrated wine cooler is the Georgian form with a hexagonal or oval body, made of vertical sections of mahogany held together with two or three brass bands.
Neo-classical wine coolers and cellarets were usually conceived en suite with sideboards and pedestals, and were still predominantly of mahogany, although exotic timbers such as satinwood, padouk, and rosewood were also used. Although wine coolers with serpentine-channelled flutes to the body, which were directly inspired by Roman sarcophagi, and those with elaborate marquetry in a lighter style, continued to be made in the 1780s and 1790s, the most common examples were plainer mahogany- hooped with brass, with the lead-lined inside divided with partitions for the bottles. It is from this date that the majority of canted rectangular, circular, dome-lidded, and octagonal examples survive. Increasingly restrained in form and decoration, cellarets were rendered somewhat redundant by the inclusion of cellaret-drawers within designs for dining-room pedestals and sideboards.
During the early 19th century the lidded cellarets of Roman sarcophagus form, which were often of much larger size than its 18th-century predecessors, dominated Regency
pattern-books, and generally do not have stands. While firms such as Dillow (est. c.1730) of
Lancaster, Continued to supply cellarets in superbly figured
mahogany, from 1810 cabinet-makers under the
influence of George Bullock (c.1777-1818) increasingly promoted the use of indigenous English woods such as pollard oak and elm, frequently enriched with foliate marquetry arabesques in the “Buhl” style. However, from the 1830s this decoration became increasingly lavish, often combined with carving, and later Victorian cellarets arc often betrayed by their squatter, heavier proportions.
PLATE-BUCKETS AND PEAT-BUCKETS Plate-buckets are distinguished by their one-dished side that enabled servants to remove plates easily and straight-sided, or even polygonal form. Inspired by the need to ferry- plates the long distances from the kitchen to the dining-room, and usually made in pairs, plate-buckets were initially intended to be placed near the fire to keep the plates warm. The plate-bucket lent itself easily to embellishment and carving with pierced Gothick arcades, Chinese blind fretwork, and even marquetry inlay in the Neo-classical style; plain types were also made. The role of the plate-bucket was superseded in the late 18th century by the warmers enclosed within dining-room pedestals, and thus plate-buckets became increasingly plain, purely for use by servants for carrying china to the dining-room. The “peat-bucket” is an Irish term for a container traditionally thought to have been used for carrying peat to the fireplace. However, this is now thought to be unlikely as the bucket and peat together would have been very heavy indeed. It is now thought that they were used for carrying any number of items, including oysters. Although buckets are usually considered an English form, 18th- and 19th-century ones from The Netherlands arc among the most common found today, and can be distinguished from their English counterparts by their slightly smaller proportions, ribbed tapering bodies and, most characteristically, by the alternating use of light fruitwood and mahogany to give a streaked effect to the bodies.
• TRAYS 18th-century mahogany trays are rare; those that exist are often made from the leaves of old dining-tables; papier-mache trays may suffer from craquelure and
flaking; the best papier-mache examples have mother-of-pearl inlay.
• KNIFE-BOXES many have had the insides removed so that they could be converted to other uses – often as writing-cases in the 19th century; a premium is attached to those that retain their original fitments; examples with shell inlay sire usually from the North Country and Scotland; pairs of cutlery urns are very desirable.
• WINE COOLERS rare examples are those from the 18th century of carved mahogany or walnut.
• PLATE- AND PEAT-BUCKETS these are faked in huge numbers, often from old timber; look out for indications of consistent old damage, shrinkage, and seams to the brass bands, and beware of suspicious stains.

Screens
The earliest known screens were made in China, but they are recorded in Europe from at least the Middle Ages and regularly mentioned in 15th-century inventories. It wa
until the coming of electricity that their role in the household changed dramatically, from temperature regulator to decorative art form.
TYPES OF SCREEN
Screens developed from sheer need; until recently, draughts and the excesses of heat from open fires were a way of life in every region where the chills of winter were felt. A number of pieces of furniture were developed to combat these problems — the wing armchair enclosed the sitter and helped him or her to keep warm, and settles, Often curved and with solid backs,
draughts and contained the heat.
However, the most versatile piece of
furniture was the folding screen. It could
be large with hinged leaves, sometimes up
to 12 in number and occasionally even
more. It was practical because, however
large, it could easily be folded and stored
away. Alternatively, a small screen with
an adjustable panel could protect a localized area from the heat of the fire. The screen’s place was at the heart of the household, so its quality openly reflected the status of the owner. Screens were therefore made of a variety of materials, from wood to leather and the most
expensive and decorative cloths. They could also be made of wicker: one featured in the painting The Virgin Child before a Firescreen (c.1440; National Gallery, London) by a follower of the Flemish artist Robert Campin. It shows the Virgin sitting on a low settle, with her head framed halo-like against a circular wicker screen placed before a fireplace.
LACQUERED AND JAPANNED SCREENS
The voyages of discovery opened up the trade routes with the East, and the East India companies were set up to foster this business. By the mid-17th century trade in Oriental curiosities with China and japan established a taste for the East, which spread and had an enduring impact on furniture ornament and design.
China and Japan had long enjoyed a tradition of sophisticated workmanship. In the West there was a fascination with their blue-and-white porcelain, but furniture was also imported into Europe. The screen Was an important feature of the Oriental interior.
There the room settings were highly formalized, and in Japan, particularly, solid pieces of furniture were few. Screens were used as room dividers, gave privacy when required, and protected against draughts. They were also designed to be easily movable and, therefore, were ideal for export. The flow to Europe rapidly increased, as Oriental screens translated well to the European interior. More importantly, they gave broad displays of sought-after Oriental lacquer and ornamentation. Chinese lacquer screens were known as “Coromandel” or “bantamwork” screens in the West. However, the demand for lacquer soon outstripped supply; Oriental screens are mentioned in the inventories of every great house between 1700 and 1750. True Oriental lacquer could not be produced in Europe because its main ingredient was the sap of the Rhus vernicifera tree,
China and later introduced to Japan and to C South-East Asia, but not grown in Europe. Once the sap had been dried, it could be applied in coats, forming a crust so hard that it could be carved in relief. Colour, traditionally black, red, and aubergine, could also be added to the sap. In Europe an imitation based on shellac (made from insect secretions) was developed, known as japanning.
The drawing-room was not the only part of the house heated by open fires and so requiring screens. In the dining-room, people often made strenuous efforts to avoid being the ones who sat at table with their backs to the fire. To relieve scorching backs and protect the sitter, a screen of woven cane was introduced, which Could be hooked to the back of a chair and extend from the head to the seat. Such small, easily movable screens were also used as splashbacks on washstands to protect the walls.
The increasing introduction of enclosed fires,
and particularly of electricity and central heating, has made the screen almost redundant. Some fine-quality examples are works of art in their own right and survive as a result, but vast numbers have been put away and damaged through neglect. Some, for example scrapwork and leather screens, are rarely in complete and undamaged condition. A screen that is in its original state and not in need of repair is a real find.

• CONDITION leather and scrapwork screens are vulnerable – check that they arc complete, as repair is costly; if the panels on a screen display an incomplete picture, the value will be lowered; scrapwork screens in good condition are generally collectable
• ALTECATIONS some polescreens have been converted into tripod tables or music stands; check for strange proportions of the top to the stand; check that polescreen insets are contemporary to the frame
• COLLECTING fire- and polescreens are the least commercial – other types are more popular, and value is based on scarcity of material, rarity of maker, and quality; when wallpaper and paints replaced 17th-century wall panels of embossed Icatherwork, sections of the leather were often made into screens; on 19th screens, surrounds of giltwood are more desirable than gilt gesso, and less likely to be damaged

Pedestal and kneehole desks
Conceived as both dressing tables and bureaux, kneehole desks first appeared in France and The Netherlands in the second half of the 17th century. Since the 19th century, at least, they have been known as bureaux Mazarins after Louis XIV’s First Minister, Cardinal Jules Mazarin (1602-61). Early examples were commissioned by members of the French court as luxury items. Usually mounted with moulded brass borders and elaborate escutcheons or ormolu keyhole mounts, bureaux Mazarins of the late 17th century are most frequently made of brass-inlaid red tortoiseshell in the style associated with Andre-Charles Boulle (1642-1732).
WALNUT KNEEHOLE DESKS
At the end of the 17th century the bureau Mazarin kneehole desk was adapted and simplified into the kneehole “burry” or desk. Until c.1740 these were usually made of walnut or red walnut, although
provincial examples in oak and fruitwood also survive. The most sophisticated examples include those made of burr woods or of stained woods, simulating mulberry, and also “japanned” kneeholes, usually black or red. The most elaborate George I and George II kneeholes (1714-60) have both crossbanded and featherbanded decoration; the tops and sides are often quarter-veneered. The ever-larger kneeholes made under George III (1760-1820) were constructed in mahogany, often in the solid, with mahogany drawer-linings; they are often exotically decorated, and stand on shaped bracket feet, which replaced the earlier bun feet.
PEDESTAL DESKS
The introduction of pedestal desks – a predominantly British form – reflected the demand for large, freestanding desks, which were more comfortable to sit at than the kneehole desk. First made in walnut c.1720 to 1730, they became widespread in mahogany during the reign of George II. Late 18th-century desks usually have three drawers in the friezes; the pedestals are fitted with either drawers or folio cupboards, and stand on moulded plinths, often with hidden casters. Pine or oak examples tend to be painted underneath with a reddish wash, and Regency pedestal desks are also blackened. During the early I 9th century, exotic timbers, particularly rosewood, salamander, amboyna, and ebony, were used, and firms such as Marsh & Tatham of London enriched Regency pedestal desks with brass inlay. Reacting to this trend, the cabinet-maker George Bullock (c.1777-1818) championed the use of indigenous woods, particularly pollard oak and holly. This return to natural woods and utilitarian designs influenced the Victorian cabinet-makers, whose desks are distinguished by their squatter, slightly heavier form and plain wooden knob handles. More elaborate examples were produced in the late 19th century in satinwood and marquetry, or with painted decoration, by firms including Edwards & Roberts.

• BUREAUX MAZARINS late 19th-century copies often have inset leather tops instead of marquetry ones.
• KNEEHOLE DESKS crossbanding and featherbanding to the sides, brushing-slides, or fitted drawers add to their desirability; lacquered-brass handles (often replaced) arc a good indication of quality – the finest examples often have either engraved metalwork or elaborately pierced backplates; most examples have thin dovetailed drawer-linings in oak, but provincial kneeholes are Often made of pine; early provincial examples have different and cheaper stained timber on the sides.

Library and writing tables.
The earliest-known tables specifically designed for writing date from 16th-century Italy, when cabinetmakers produced elaborately carved walnut tables with sloping desks fitted into the tops and small drawers below for the storage of writing materials. Similar tables, or bureaux, probably originated in France during the third quarter of the 16th century.
THE 18TH CENTURY
Tables designed specifically for writing were introduced in England after the Restoration (1660). French tables influenced English designs during this period, and both French and English examples were usually made of oak or walnut with a rectangular folding top. The flap was supported by baluster or tapered pillar legs they are often decorated with “seaweed” or floral marquetry and closely parallel the Dutch models. During the early 18th century the Louis XIV concept of a free-standing bureau plat (a flat-topped writing table) invented by Andre-Charles Boulle (1642-1732) was taken up and adapted by English cabinet-makers. Intended to occupy a central position in the library, and to act as a statement of the wealth and power of its owner, such desks reached the zenith of their popularity in England during the mid-18th century, and by the third edition of The Gentleman and Cabinet-Maker’s Director (1762) by Thomas Chippendale (1718-79), no less than 11 types of carved open pedestal desk were illustrated.
As postal systems developed, and as paper became cheaper and standards of education improved, so the need arose for less stately versions of the writing table, particularly for use by women. Some of these tables appeared in Chippendale’s Director; while others featured in The Universal System of Household Furniture (1762) by John Mayhew (1736-1811) and William Ince (c.1738-1804). A great range of new forms came into use at this time, which were notably lighter than their predecessors. Neo-classical tables were made in exotic hardwoods such as satinwood, an expensive and very fashionable wood that was particularly suited to this lighter style of table, and many examples were adorned with fine marquetry.
THE 19TH CENTURY
Several new types of writing table developed during the Regency period (c.1790-1830), including the Carlton House desk, named after the London home of the Prince of Wales (later George IV). Another fashionable form featured curved X-shaped supports at either end, with drawers in the frieze, and the flat top enclosed by a three-quarter brass gallery. At the end of the Napoleonic Wars in 1815, furniture designers were given the opportunity to create a wide range of new forms, when the technology required to marry wood
to metal – developed for military purposes – was applied to furniture. The furniture of the Regency period was therefore characterized by elegant design combined with ambitious construction techniques. New features included galleries at the top of the table, used either for decorative effect or to hold books safely; numerous small drawers, hinged flaps, and curved ramps, which could be pulled out as required, extending the available surface and facilitating activities such as drawing and painting; and screens that extended beyond the main structure in order to shield the writer’s face from the heat of the fire. In addition, revolving circular or polygonal “drum”tables were invented for the library, where they were used for storing and displaying books and paper.
• “BUHL” WORK examples tend to be inferior to those of the 17th and early 18th centuries: the gilding is generally brassier and the tops are inlaid, in contrast to the leather-lined tops of the 17th-century prototypes; the drawer-linings of original examples were usually in oak, while on the copies they are in walnut.
• ALTERATIONS leather tops can get ripped and have often been replaced – this should not affect value; heavy legs have often been replaced with lighter legs of an earlier style to make the table more commercial.