Posts Tagged ‘Cabinets’

WINE-GLASS, BLUE GLASS CASED OVER
GLASS, with ACID-ETCHED DECORATION
Benjamin Richardson, England, 1857
I It. 143 mm (563 in.)
Acid Etching: Although acid-etched glasses
arc known to exist from the 17th century,
the process was not generally used in glass-
making until the 19th century, with the
discovery of hydrofluoric acid. Heinrich
Schwanhardt (d.1693), son of the Nurem-
berg engraver Georg Schwanhardt, is
recorded to have engraved glasses with
acid, one example attributed to him being
dated 1686. The technique can be used
either to cut through one layer of glass to
another, as in the glass illustrated, or to
provide a single-layered glass with a matt
finish. An acid-resist such as wax paraffin
covers the parts that are not to be affected,
the pattern having been cut through the
resist. The surface of the glass is then
treated in an acid bath (such as a mixture
of 100 parts of water, 10 of potassium
fluoride and t part hydrochloric acid).
Benjamin Richardson of the Richardson
firm of Stourbridge took out a patent to
etch glasses in 1857.
VASE WITH ACID-ETCHED DECORATION
J. & J. Northwood, England, r.1878.
Ht. 216 mm (85 in.)
It was only in the 19th and 20th centuries
that acid-etching became at all an accepted
mode of decoration. In England it is
known that the Dudley firm of Thomas
Hawkes used the technique in the 1830’s.
Besides flat glass objects, wine-glasses,
bottles and vases were being acid-etched
by the 1840’s. John Northwood and T.
Guest were involved in the Richardson
experiments with acid-etching, and in the
186o’s established themselves as individual
firms specialising in etching. They were
known as J. 8c J. Northwood, and Guest
Brothers respectively, and produced a
quantity of etched work in the later 1860’s
and 1870V The skill and delicacy of the
etching they achieved can be seen on the
vase illustrated, made at the J. 8c J.
Northwood works and shown at the Paris
Exhibition of 1878. Acid-etching was by
no means a technique confined to England,
however.
The Techniques of’Taking Away
As Maurice Marinoi of Trance grew to
understand the nature and working of
glass, he experimented with its ornamen-
tation. In 1922 he began using the
technique of acid-etching in a manner
distinctly his own. The process had been
used by French glass-makers since the
mid-19th century. F.mile Galle, comment-
ing on the technique, had said that it would
not do for delicate work, but ‘it cuts into
certain glasses in a manner of its own’. He
used it in his factory from 1890 onwards,
and the Daum factory had also used it to
some extent. Marinot took up acid-etching
because it suited his purpose better than
any other decorative technique. When he
employed acid-etching he used the massi v e
forms he had always favoured, in trans-
parent, occasionally tinted, glass. The
etched designs cut deeply into the surface,
giving an almost sculptural look to the
glass. The whole surface of the glass was
subjected to the treatment, with the most
varied results.
Acid-etching has been used to give a matt
surface to the colourless glass vase illus-
trated. This slender vase has a round foot,
w ith a long stem widening slightly towards
the bowl, which is of an exaggerated tulip
shape. It is just one example of the beaut]
of modern Swedish glass. Even such an
aesthetically difficult technique as etching
has been triumphantly used to give .1
beautiful all-over textural and eye-catch-
ing finish. It has been said that ‘Sweden’s
great contribution to modern design was
to transform Functionalism from an in-
tellectual theory into a practical instru-
ment for better living’ (Polak, 1962). This
was eminently shown in her glass-making;
but besides qualities like fitness for prac-
tical purpose, toughness in wear and
cheapness of production, the general aim
from the beginning was to create objects
of beauty. The Swedes succeeded in their
glassware perhaps more than in any other
branch of modern design.
ENGRAVED AND SAND-BLASTED VASE
Hy Sverre FtTterscn, Hadeland, Norway, 1038
Sand-blasling: In the process of sand-
blasting a stream of sand, crushed flint or
powdered iron is directed on to the surface
of the glass in a jet of air. The parts of the
glass to be left plain are covered with a
stencil plate of steel, or an elastic varnish
or rubber solution painted on to form a
protective shield. The type of finish is
varied by altering the size of the nozzle, or
the abrasive, or the air pressure. The
technique has been in use since 1870,
though it has rarely been applied to vessel
glass, except for lettering on mass-pro-
duced items, and is mainly used on glass
panels for decorative architectural use.
One of the more successful uses of sand-
blasting on vessel glass was by Sverre
Pettersen of Norway (1884-1959), who
was engaged as designer to Hadelands
Cilasswerk in 1928—at that time the only
factory for table glass and decorative glass
in Norway. During the ‘thirties he pro-
duced some very interesting pieces with
sand-blasted decoration.
PLATE WITH SAND-BLASTED ENGRAVING
By I adislav Oliva, Czechoslovakia, 1959
Diam. 362 mm (1425 in,)
Such are the difficulties attached to using
sand-blasting for anything but the heaviest
surface decoration that only very occasion-
ally are satisfying examples of the tech-
nique to be found. One of the exceptions is
this plate, designed and executed by
Ladislav Oliva (b. 1933) in Czechoslovakia.
The plate, in clear colourless lead crystal
glass, has a slightly raised rim, and the
grille-like decoration is in the form of cuts
about to mm (4/ioths in.) deep. Oliva
manages through this technique to give
the glass a new and exciting appearance.
His decorative themes always seem to
result from the natural lights of the heavy
glass mass. The matt finish that sand-
blasting imports to the glass can be very
pleasant to the touch, although sometimes
it can give a fairly rough effect.
The  century has been called the ‘golden
age of glass”, for it added many new tech-
niques to the glass-maker’s repertoire. This
sudden burst of activity can be put down to
many factors, including ‘the industrial revo-
lution, the relaxation of government controls
on the industry (specifically in England) and
a pride of craftsmanship born of freedom’
I Revi, i<)5g). Not since the Italian Renais-
sance had there been such an interest in new
glass-making ideas. In America the larger
firms hired scientists to discover new methods
of colouring glass, one of the best-known
being the Englishman Joseph I^ocke. In
Britain and on the Continent there was keen
rivalry in producing new types of art glass
for a highly competitive market. Demand
rem lied its zenith towards the end of the
I ii torian era. Since then, though new
techniques have still greatly interested glass-
makers, the art glass produced has reflected
the inherent qualities of the material, rather
than added decorative effects.
Pearl Satinglass, also known as Pearl Ware,
Mother-of-Pearl Satinglass and Verre de
Soie, can be found in a variety of patterns
and colours, but basically it shows the
technique of keeping a symmetrical or
controlled pattern of air traps within the
body of a vessel. The vase illustrated shows
a typical example in the so-called hobnail
pattern. Benjamin Richardson of England
filed the first patent for this technique in
1857. His method was quite simple. A
gather of glass was blown into a mould
which carried the pattern in projected
form. The piece, thus indented, was
covered by a further gather of glass, which
caused air traps to form over the pattern.
Another method current in England and
America in the late 19th century was to line
a heated mould with glass tubes, either
clear and colourless or coloured, and to
blow a bubble of glass into this mould.
BOWL OPAQUE IVORI
COLOURED GLASS CASED WITH A P.AIJi RUBY OUTER
LAYER
Stevens & Williams, England, about 1885
lit. 140 mm (55 in.)
The tubes would thus be caught up and
marvered into the body of the glass. By
twisting the paraison the worker produced
articles of glass with pearly swirled stripes
on the outer surface. This method was
probably used to produce the body of the
bowl illustrated, which has been further
worked to form a frilly rim, and has the
heavy applied decoration current around
1885, Patents to produce Pearl Satinglass
were filed by firms in New York in 1881
and France in 1885. The Mt. Washington
Glass Company of the U.S.A. filed patents
in 1886, which also suggested using heat-
sensitive metal to colour the glass, and
giving the article a lustreless finish by
using an acid bath, or by sand-blasting.
The Phoenix Glass Company of Pennsyl-
vania filed patents in 1886, 1887 and 1888;
the final patent described the use of two
moulds, one to pattern the inner wall of
the article, the other to be used after the
outer casing of glass had been applied.
FAIRY LAMP IN PEARL SATINGLASS, RAINBOW STRIPED
IN BLUE, ROSE, YELLOW AND APRICOT
About 1885. lit. 152 mm (6 in.)
The finished product made by the tech-
nique last described displayed a criss-
crossed network of pearly-indented lines
contained in the body of the article.
William Webb Boulton, who had the
Audnam Bank glass-house in England,
filed a patent for Pearl Satin Glass in 1885.
Other English glass-houses manufactured
this type of glass, notably Stevens &
Williams of Brierley Hill, who called it
‘Verre de Soie\ Much of the Pearl Satin-
glass produced in the late 19th century
came from Bohemian and French factories.
These cheaper wares, supplied by factories
at Steinschonau and Altrohlau, Bohemia,
effectively ruined the market for the finer
wares of England and America. Many
different means were used to colour Pearl
Satinglass. The rainbow striping suggested
in this fairy lamp was produced by laying
coloured rods of glass on the body of the
article before it was fully formed.
VASE IN PEARL SATINGLASS
Thomas Webb & Sons, England, probably early
iSoo’s. Hi. 260 mm (1025 in.)
The technical development of trapping air
in moulded recesses between an opaque-
glass body and a tinted layer was further
refined by Thomas Webb & Sons of
England. In the magnificent example
illustrated the vase has a diamond air-lock
pattern between opaque and translucent
layers of glass, but has been covered by an
outer layer etched away to form a floral
pattern in relief; the whole article has a
satin finish. In 1889 Thomas Webb
patented this process for manufacturing
cameo relief designs on articles of Pearl
Satin Ware. After the diamond air lock
pattern had been produced in the usual
way, an extra coating of opaque white or
coloured glass was applied. The design
was painted on to this coating with acid-
resisting inks; when the article was plunged
into an acid bath, the acid dissolved away
all glass not protected by the resist. The
glass-maker had to be extremely careful
not ti) leave the object in the acid too long,
lest the acid reached the air traps.
FOOTED VASE, WITH CORAIE1NE DECOR AI ION
Last quarter of iqih century. 111. 127 mm (j in.)
Corulene: ‘The vase illustrated displays a
type of decoration that became popular
from its introduction in the last quarter of
the 19th century and is known as
‘Coralcne’. A design was painted in enamel
on the surface of a glass. Tiny glass beads,
which could be clear, coloured or opales-
cent, were then applied and stuck to the
enamel paint of the design. The object was
next put into a muffle-kiln, where the
enamel and beads were fired firmly into
place. Decoration could be in the shape of
coral, but is also seen in fleur-de-lis,
herringbone, sheaf of wheat and many-
other patterns. This type of decoration is
found in all colours and on all types of
glassware. Coralenc was so named by the
Mt. Washington Glass Company in the
U.S.A., and by several Continental and
English glass manufacturers. Its use was
not restricted to any one factory.
Amberina is generally recognised as a
clear amber glass shading to red at the top.
The patent for it, dated July 24, 1883, was
granted to Joseph Locke of the Libbey
Glass Company. This remarkable man was
born in Worcester, Kngland, in 1846 and
worked first as a potter. Guest Brothers of
Stourbridge, etchers and decorators of
glass, engaged him, but later he was
persuaded to join the firm of Hodgetts,
Richardson & Company, where he pro-
duced his copy of the Portland vase. After
various employments, Locke finally went
to America in 1882, where he was signed
on by the New Kngland Glass Company
of Cambridge, Mass., later to become the
Libbey Glass Company of Toledo, Ohio.
‘Amberina’, ‘Pomona’, and ‘Agata’ glass
are only a few of his achievements while in
their employment. Amberina was the first
patented method for producing shaded
and parti-coloured glassware from a sen-
sitive homogeneous metal.
To produce Amberina a very small amount
of gold in solution was colloidally dis-
persed in a transparent amber glass metal.
When an object had been made from this
mix, it was allowed to cool below a glowing
red heat and then certain parts were re-
heated at the ‘glory hole’ (a small opening
in the furnace). This caused a red colour to
strike in the reheated portions—but over-
firing caused a fuchsia or purple shading.
Further patents were issued either to
Locke or to Kdward D. Libbey. An
interesting development was the produc-
tion of blanks composed of sensitive
Amberina glass which, after moulding,
were reheated to produce a deep ruby
colour on the outer surface only. A design
would be cut through to the undeveloped
amber colour below, giving a rich effect.
Amberina was made in Cambridge, Mass.,
between 1883 and 1888 by the New
Kngland Glass Company. A fine though
short-lived revival was made between 1917
and 1920, when the firm had moved to
Toledo, Ohio; one of its products is
shown above.
New England Glass Company, U.S.A., 1886
Ht. 178 mm (7 in.)
Almost every glass company in Europe and
America probably made Amberina at some
time during this period. A new technique
was patented for the New England Glass
Company in 1883 and was called ‘Plated
Amberina’; this was unique to that firm.
A piece of opal or opalescent glass plated
with a gold-ruby mixture was reheated at
the ‘glory hole’, so that it would develop
deeper and lighter shadings on its outer
surface. When Amberina metal was used,
the shading would of course be amber-to-
red. However, other colours could be
made: a sensitive cobalt and ruby glass
mixture would produce a plated ware
shading from blue to ruby. Canary, blue
and green colours were also mentioned in
the patent. Plated Amberina invariably has
moulded ribbed decoration, as in the
example shown, though this had no par-
ticular bearing on the specifications men-
tioned in the patent. It was manufactured
only from 1883 to 1886.
PARFA1T oi.ass in rose amber glass
Ml Washington Glass Company, U.S.A., 1886
Ht. 127 mm (5 in.)
The Mt. Washington Glass Company,
New Bedford, Mass., attempted more or
less successfully to produce its own
Amberina glass under the name ‘Rose
Amber’. This was in every way similar to
Locke’s Amberina. Needless to say, the
New England Glass Company had an
injunction granted in 1886 in their suit
against the Mt. Washington Glass Com-
pany for infringement of their patent.
The Circuit Court of the United States
forbade the New Bedford firm to produce
its Rose Amber wares. However, it did not
seem that this injunction had any effect.
The New Bedford Board of Trade Report
of 1889 describes the making of Amberina,
Rose Amber, by ‘two companies, of which
the Mt. Washington was one’, and de-
scribes how ‘it caught the popular fancy
and was all the rage for about two years’.
According to this report it was the success
of the Amberina glass that caused Mt.
Washington to go in for an opaque shaded
ware—Burmese glass.
AMBERINA GLASS
New England Glass Company, U.S.A., iS
iii. 121 mm (475 in.)
WINE-GLASS IN ALEXANDRITE GLASS
English, beginning of 2olh century
Ht. 114 mm (45 in.)
Quite a number of Amberina pieces were
pressed or press-moulded. This piece can
definitely be attributed to the New Eng-
land Glass Company, since it follows a
design sketch made by Joseph Locke in
1884 when he was head designer for the
Cambridge winks. I lobbs Brockunier &
Company of Wheeling, West Virginia,
were licensed to manufacture pressed
Amberina by the New England Glass
Company in 1886. Sowerby’s Ellison Glass
Works Ltd., Gateshead-on-Tyne, Eng-
land, were also licensed to produce pressed
Amberina in 1883. A transparent, homo-
geneous glass shading from pale amber to
a delicate rose tint was press-moulded by
the firm of CristalletICS de Baccarat of
France from 1916. Known as ‘Rose Teinte’,
or to collectors as ‘Baccarat’s Amberina’,
it was reintroduced in 1940 as a popular
item. Its delicate colours were a result of
using less gold salts in the glass, but its
similarity to the American Amberina and
Rose Amber is undisputed.
‘Alexandrite’ glass, a single-layer glass of
three blended colours, first appeared about
1900, and is reputed to have been made by
the two English firms of Thomas Webb &
Sons and Stevens & Williams. 11 started off
as an amber glass; a portion would be re-
heated to rose, and reheated again to blue
on the outer rim, producing an exception-
ally beautiful effect. It is found in plain as
well as patterned surfaces. Stevens &
Williams used a differing technique to
produce the same effect. They cased a body
glass of transparent amber with rose and
blue glass. The outer casings of blue and
rose were then cut away, to reveal the
yellow glass beneath. Kolo Moser, a glass
designer of Bohemia of the early 1900’s,
produced an amethyst transparent glass
which carries the mark ‘Alexandria, but
this one-colour ware should not be con-
fused with the work attributed earlier to
Webb and Stevens & Williams.
PITCHER IN RUBY GLASS WITH DEVELOPED
OPALESCENT DESIGN
I hi i ijih century. I It. 279 mm (11 in.)
Opalescent Glass: In the late 19th century
glasses with raised opalescent white de-
signs became very popular. A coloured
gather of glass was heavily coated with a
sensitive, clear colourless glass containing
bone ash and arsenic. This was blown into
a patterned mould to give it the raised
design. It was then cooled slightly and
reheated, the raised parts striking an
opalescent white, while the background
retained the original colour. Inexpensive
glassware in this technique was produced
by Hobbs Brockunier & Company of
Wheeling, West Virginia; Alexander J.
Beatty & Sons of Steubenville, Ohio;
Phillip Arbogast of Pittsburgh, Pennsyl-
vania ; John Bryce & Company of Pitts-
burgh ; King & Company of Pittsburgh;
and Doyle & Company of Pittsburgh, and
others. Thomas Davidson of George
Davidson & Company Ltd. the Teams
Glass Works, Gateshead-on-Tyne, Eng-
land, patented in 1889 a process for making
a pressed, shaded version, in which the
opalescence was either white or of the
same shade as the body metal.
VASE IN BURMESE GLASS
Ml. Washington Glass Company, U.S.A., 1885
Ht. 305 mm (12 in.)
‘Burmese’ glass is a single-layered glass
shading from opaque greenish-yellow to
deep pink at the top. It was developed by
the Mt. Washington Glass Company,
New Bedford, Mass. Frederick S. Shirley
patented his formula for Burmese in 1885
for the firm. He produced the glass by
adding small amounts of fluorspar, feldspar
and oxide of uranium to essentially the
same ingredients as used by Joseph Locke
to make his Amberina glass. The fluorspar
and feldspar gave the glass its translucency,
and the uranium oxide made the ordin-
arily translucent white glass melt a pale-
yellow in colour; the gold made the glass
sensitive to thermal changes so that when
reheated at the ‘glory hole’ it struck a
salmon pink colour, which shaded down
to the original yellow. A second reheating
caused the pink glass to revert back to its
yellow colour, a feature quite often seen
on the rim of a piece of Burmese glass.
Frederick Shirley’s formula for Burmese-
glass was patented in England in 1886.
Thomas Webb 8i Sons of Stourbridge,
England, purchased a licence to copy-
Burmese products as well as to produce
their own shapes and designs. Most ol t he-
English Burmese ware is acid-finished,
though Mt. Washington produced both
glossy and acid-finished Burmese ware.
Thomas Webb & Sons called their glass
‘Queen’s Burmese Ware’. The glass was
much used for the patent ‘fairy lights’ or
small individual candle shades so popular
in England and America in the late
‘eighties. Queen Victoria ordered a tea-set
in Burmese glass from the Mt. Washington
Glass Company, enamelled with what was
to become known as the ‘Queen’s’ design.
The ornamentation of Burmese ware was
often of a highly decorative order. Verses
by well-known poets, Egyptian scenes, and
bird and animal portrayals were included
in enamelled motifs. Occasionally, finely
wrought applied decoration w ould be used.
Peach Blow: When a ‘Peach Bloom’
coloured Chinese porcelain vase was sold
for $18,000 in 1886, this caused such a
sensation that products labelled ‘Peach
Bloom’ or —slightly changed ‘Peach
Blow’ attracted many sales. ‘The glaze on
the vase was described as being the colour
of ‘crushed strawberries’. The magic of
the name attracted the attention of manu-
facturers of coloured art glasses, who tried
to devise new types suitable for this name.
Hobbs Brockunicr & Company of Wheel-
ing, West Virginia, produced such a glass
and called it ‘Wheeling Peach Blow’.
Replicas of the ‘Morgan’ vase were made,
like the example illustrated, in both glossy
and acid finishes. The moulded Stand with
its five-headed griffin is in an unimportant-
quality amber glass, hut the vase itself is
made of white opal glass plated with 1
transparent amber glass, made heat-sensi-
tive with gold salts. Reheating caused the
glass to strike a ruby colour, shading to
yellow or amber.
The Mt. Washington Glass Company
filed trade-name papers on the terms
‘Peach Blow’ and ‘Peach Skin’ through
Frederick S. Shirley in 1886. As a
colourant for their new products Shirley
substituted a small amount of cobalt or
copper oxide, instead of oxide of uranium
as in making Burmese. This produced a
homogeneous glass shaded pale grey-blue
to a delicate rose tint in the reheated
portions. When plunged in acid the surface
acquired an all-over slightly grey cast. As
it is a single-layered glass, the shading is
the same on the inside as on the exterior.
The Mt. Washington Peach Blow wares
were manufactured in similar shapes to
their Burmese ware. Moulded and applied
decoration were used, as well as gilding
and enamelling. The example illustrated
shows the ‘Queen’s’ design, as ordered by
Queen Victoria from the firm. The pattern
is of conventionalised flowers in raised
enamel, much of the decoration done in
pure gold reduced with acids.
The success of its Amberina glasses caused
the New England Glass Company to
experiment further with heat-sensitive
glasses. One of the resulting products was
patented by Edward D. Libbey in 1886
and called at first ‘Wild Rose’, later ‘Peach
Blow’. It is a single-layered glass shading
down from red to white in the lower part
of the piece. To produce it, an opal glass
was combined with a gold-ruby glass in
one pot. When a vessel had been formed,
reheating produced the rose colouring in
the required parts. Glasses made from this
metal were moulded, decorated with gild-
ing and enamelling and also acidized to a
satin finish. Occasionally, they would be
left in the original glossy state. The vase
illustrated was decorated by Joseph Locke
for his daughter Nora. The etched reliel
designs covering the surface of the glass
have been outlined and highlighted with
gold traceries and a dark brown mineral
stain.
At about the same time that the U.S.A.
glass-making firms were experimenting
with heat-sensitive glasses, both Thomas
Webb & Sons and Stevens & Williams of
England manufactured shaded wares
which they termed ‘Peach Glass’ or ‘Peach
Bloom’. Webb’s Peach Glass was cased,
the inner layer being creamy coloured with
a slight ly greenish cast in the upper portion.
It is similar in appearance to Hobbs
Brockunier & Company’s ‘Wheeling Peach
Blow’. Stevens & Williams of Stourbridge
produced a glass called ‘Peach Bloom’
which was also very much the same in
appearance. The English Peach glasses
were produced in both glossy and acid
finishes, and arc frequently found with
elaborate gold decoration on both finishes.
Occasionally, Webb’s Peach Glass will
have the Webb incised mark on the base;
Stevens & Williams ware also sometimes
bears a mark under the foot.
The Boston & Sandwich Glass Company,
Sandwich, Mass., manufactured a glass
known as ‘Sandwich Peach Blow’. This
was a single-layered glass, strawberry ice
cream pink in shading, often found in
moulded and twisted swirl decoration; see
the example above, which also has the
characteristic thorn handle of the period.
Overlay decorations in a camphor or
greyish colour are quite usual, the com-
plete piece having an acid finish. Many-
other types of glass are loosely termed
‘Peach Blow’, but basically, apart from a
slight variation in colour shading, the
products can be summarised as follows:
Webb and Wheeling Peach Blow are
always lined, but Mt. Washington, New-
England and Sandwich Peach Blow are
never lined. The Bohemian manufacturers
soon cashed in on the vogue of Peach Blow
wares, producing far cheaper glasses,
which forced the better products off the
markets, though their wares in no way-
resembled those made in America and in
England.

THE AGE OF THE DESIGNER
CHIPPENDALE PERIOD
IT is as well to realise at the outset that the title of this chapter, The Age of the Designer, is one largely of convenience, and must not be accepted without certain qualifications 1930 chairs dining black . That it implies an age when certain men were working out styles in an individual way is perfectly true, but it does not mean that these were the only men working in those styles ; neither does it mean that they were necessarily the originators of them greek designs and motifs . This may sound some-,A hat of a paradox, but the case is simple when one comes to analyse it kem weber designed art deco .
Take two outstanding cases, those of Thomas Chippendale and George Hepplewhite brass railings marble furniture . Both these names have come to stand for certain styles in furniture, and a chair, or w hatever it may be, can be picked out and dubbed as one or the other antique epergnes and marks on bottom . But this does not necessarily imply that it was made by either of these cabinet makers deco legs . When one comes to consider the vast amount of mahogany furniture of the period which has survived (discounting the many fakes and reproductions) it must be obvious that all of it could not possibly have been made in the workshops of just two firms decorated night tables . That both firms prospered and turned out a good deal of furniture is true, but against this was the fact that it was all made entirely by hand, so that the labour and time involved must have been tremendous rococo eagle dresser .
It becomes obvious then that, taking just this aspect of the case, there must have been many cabinet makers who were making furniture in these styles, and we have now to consider whether these were plagiarists copying the ideas of just two men, or whether the names Chippendale and Hepplewhite have come to be applied to certain furniture merely because these two fashionable cabinet makers happened to be working in styles which had evolved naturally delftware pottery . Opinion on the subject has changed considerably during the last twenty-five to thirty years antique german desk . Chippendale FIG rene prou . 107 how to distinguish a 19th century empire sofa . ARMCHAIR
WITH FLATTENED
TOP BACK RAIL wooden upholstered arm chair .
About 1755 makers of silver table ware in late 1800’s .
The tendency to replace the rounded or hooped back by the flattened top rail is shown in its culmination in this chair calamander wood bookcase .
FIG 18 century hall tables . 108 frosted glass vase with smokey streaks . CHAIR WITH
SQUARE MOULDED
LEGS “18th century desserts” .
About 176o what, what+british vernacular .
When this square form of
leg was introduced, the
stretchers were once
again used anttic dishes . The double
ogee section of the legs
was used almost ex-
clusively antique blue side table .
FIG chippendale dining double pedestal . 109 antique gateleg drop leaf round table . LADDER BACK ARMCHAIR belgium porcelain dining tables .
About 1760 making cabriole legs with padded feet .
The back Is a departure from the upright slat type which had been used almost exclusively since Queen Anne’s time swedish antique round carved tables . It was probably a resurrection of the tall ladder back of James II time parts of chambersticks .
FIG oriental drop front . 110 typical art deco furniture . SIMPLE
MAHOGANY CHAIR antique folding card table dutch painting .
x76o-1770 baltimore fancy chairs .
For less wealthy cus-
tomers plain chairs were
made which in a general
way followed the pre-
vailing fashion but with
costly carving and other
detail omitted late medieval sideboard . They
were sometimes made in
beech chest on legs sofa table .
funtature dating . CHAIR WITH CHINESE INFLUENCE antique white chamber pot .
About 76o early soft paste teapots .
The Chinese influence is shown in particular in the use of the lattice work in the back and the frets in the rails whitle marble tables. consols, sideboards, dining . At best it was but a grafting of Oriental detail on a purely Western form spergne antique .
FIG guilloche antique frame -russian -ebay . 112, UPHOLS• TERED ARMCHAIR 1850s gateleg with butterfly leaf .
About i26o,
t II Note that the back has lost the winged form seen in the last example of an upholstered chair in Fig english walnut club chair . 79, p how african art inspired art deco . 101 rectangular drop leaf sofa table . Small fretted brackets between the front legs and sea, rail were often used as
in this example russian neoclassical secretaire .
Strong Trade Tradition
used to be held up as a great designer and practical cabinet maker, so great and individual in style that the whole trade automatically turned to him as a leader and copied his works in sheer admiration george oakley furniture . To-day people are more cautious in accepting this theory blue glass pheasant .
Both Chippendale and Hepplewhite were practical cabinet makers antique furniture made with scottish pine . Their places of business are known to have been, the former in St lovers on a swing’ meissen porcelain . Martin’s Lane and the latter in Cripplegate, and both published books of designs georges jacob furniture . Possibly it was these books that gave rise to the theory that they were the leaders of design, the fact being lost sight of that these were virtually catalogues aaron burr desk . The more likely theory is that both men were extremely successful interpreters of styles which were a natural development along traditional lines 17th century silver tableware . In the sense that both were able, practical cabinet makers, with a gift of originality, they helped to establish styles on thoroughly sound traditional lines and at the same time impart to their work a feeling of individuality thonet recliner . Apart from this, it can hardly be claimed that either was a great designer, turning out purely original work in the way that, say, Wren designed buildings which were entirely individual and obviously the work of a great inventive genius jackfield pottery animals .
The case of Robert Adam as a designer of furniture is in a rather different category antique silver fish knives and forks . Adam was an architect, not a practical cabinet maker, and he designed his furniture specially to suit the houses he built edgar brandt deco tables . It was natural, then, that his furniture should show more of a definite break from tradition, because he was not fettered by years of training in a certain established school (with whatever advantages and disadvantages that carries with it) flatware forks types . At the same time, the fact that he became an extremely successful architect with a large clientele made it inevitable that he should attract the attention of many cabinet makers, who would make furniture which was either a copy of pure Adam work or was just founded upon it display cabinet design in royal style . Thus, except for certain authentic specimens, one cannot hope to do more than classify a piece as being in the style of Adam
THE CHIPPENDALE PERIOD
With this explanation of a title which might otherwise be regarded as misleading we may turn our attention to the first C’hippendale’s Status
school of design, which began at about the time when the second rising for the house of Stuart took place, 1745 coalport 1920s vogue collection . We have seen that by this time mahogany was used exclusively—that is, so far as the towns were concerned warm entree dish . There still was a certain amount of oak furniture made in country districts, but it was mainly in the style of years before and cannot be said to be typical of the period pennsylvania dutch antique china cabinet hand painted pictures . It has also been noted that in some respects the Queen Anne feeling was retained, especially in the pieces which had always been made in solid wood funtature dating . In particular, the chair had still much in it that was reminiscent of early times, although the gradual flattening of the top rail and the straightening of the uprights had introduced a new element furnuture pieces supboards style bambocci .
Taken generally, the early Georgian period was disappointing from the point of view of design cockerel mark pottery . It is to be admitted that design is largely a matter of individual taste square white occassional table . One man can find satisfaction in work that has no appeal to another mallard furniture . At the same time the models of about 1730 make a poor showing when compared with the best work of Queen Anne’s time, especially in the chairs for sale antique pedestal candle table 3 legs brass claw feet . Chair making then, as to-day, had become largely a specialised job, and for some curious reason the craftsmen somehow failed to make the best of their opportunities pop up cigarette deco dispenser . Not that the work was generally inferior in the quality of the workmanship ; the carving was often of a high order ; but that the outlines and general shapes were often poor rare antique japanese tea bowls . For instance, the cabriole leg often degenerated into an overshaped thing, and the claw and ball foot lost a great deal of its former vigour british deco table . The shapes of the backs, too, were often unsatisfactory and give one the impression that in feeling round for a new expression the craftsmen were lacking in appreciation of a well-balanced line, good craftsmen though they might be “antique collectors blog” .
By 1745 or so there was a definite upward tendency again steel dining table germany . This has often been put down to the advent of Chippendale antique austria 1855 - 1953 statues . That his individual work was generally of a high order, showing a fine appreciation of line backed up by the best craftsmanship, is true, and in that sense he probably did influence the trade, but it is doubtful whether this alone could have been the guiding force in the whole world of cabinet making black desk curved legs . It is too much to expect that his influence could have become general in so short a time and extend all over the country The probable truth is that that particular age produced a number of men all largely gifted with an eye for good proportions and line porcelain table clocks . It is difficult to explain just why this should have been, but parallel cases happen in all the arts and crafts at certain periods english sterling silver chambersticks . They lapse for a while and then a whole number of capable men come along, and the art is lifted from the rut into which it seemed to be sinking antique designs of dinner tables .
Chippendale’s Director paul de lamerie sauce boat .—We may, at this point, turn to what little we know of Chippendale himself antique ivory chinese queen ang king . This is derived chiefly from his book, The Gentleman and Cabinetmaker’s Director, first published in 1754, and from bills for goods supplied by him regency era anquite beds . His workshop was first in Conduit Street, Long Acre, and afterwards in St design italian crockery cupboard . Martin’s Lane, and it is apparent that he conducted a very flourishing and fashionable business antique walnut tall boys . It appears that in 1755 fire broke out, and a notice of the event states that there were twenty-two workmen’s chests in the shop antique english knights dining tables . When one adds to this the men who would have been engaged in polishing, fitting, and general work it is apparent that a great deal of work must have been turned out antique imari porcelain . Later in his life (he died in 1779) he made a good deal of furniture to the designs of Robert Adam blonde french deco vitrine .
That he himself was a practical carver and cabinet maker there is no doubt, and this makes it all the more remarkable that so many of the designs in his book were impractical bernard palissy . It is to be admitted that the plates were the -work of an engraver who may have used considerable licence, but, even so, it is difficult to conceive of a practical man passing designs which he must have known could not have been made as they were frosted glass opalescent glass . From the preface of a later edition it is apparent that many people of the time had their doubts as to the practicability of some of the designs, for he makes a sort of apology, and attributes the adverse criticisms to ” Malice, Ignorance, and Inability antique dressers by northern furniture .” Possibly there was something in it metal plates and trays from iran . No man becomes successful without somebody feeling the jaundice of jealousy, but all the same Chippendale would have had his work cut out had he had to make some of the items exactly as they appeared in his book glass cabinets display printers type .
In some rare instances it has been possible to identify pieces of furniture with illustrations from the Director and the differences where the practical cabinet maker has had to adapt the design are obvious davenport desk 19 century . Probably the truth is that the The Gentlemen and Cabinet Maker’s Director
book was intended primarily as a catalogue which would attract men of wealth to the workshop antique elm table & chairs . The list of subscribers includes many titled people and rich merchants, who would be likely to have money to spend, and these were objective of the book ; people who would turn over the leaves and make a selection of things they would order from him british longcase makers .
It is true that the book was also described as a trade book which would include directions for making the various
FIG, 114 charles side table stretcher walnut . SIMPLE SIDE TABLE WITH MOULDED LEGS swedish furniture 1930 .
About i76o marquetry drop leaf side table .
The straight leg moulded along its length was used considerably by the Chippendale school swedish antique side table . Note that the inner corners are deeply chamfered antique bookcases london .
pieces antique commodes chamber pot . In the event the main bulk of the subscribers were cabinet makers (this probably accounts for the defensive preface he wrote for his second edition), but from Chippendale’s own point of view these were probably incidental to the main object decortive burr rosewood vase .
CHAIRS
The middle and second half of the eighteenth century has often been called the golden age of cabinet making, and it was in this Chippendale period that it blossomed 1920 art deco antique dressing table . As a first example, take the armchair shown in Fig walnut armchair josef urban art noveau . 107 antique side table with sloped shelves . It represents a type that has never been excelled dining table glass silver antique . Individual taste may prefer, say, the fine shield back chair of the Development of the Chair
Hepplewhite school (and certainly that is beautiful enough), but in its own particular way this Chippendale chair has all the parts that go to making a really fine piece, satisfying in line, sound in construction, and of the finest workmanship lancashire antique bureau 1790 .
In many ways this chair is a direct descendant from the Queen Anne models with which we are already familiar antique drop front writing desks . Other influences were to creep in later, but here almost every detail has something about it that shows its origin in the traditional line ancient gothic furniture . The legs are of the cabriole type and have the turned club foot used as early as the late seventeenth century czechoslovakia r porcelain . They are finely proportioned, with the full, high knee completely free from the overdone, bandy shape often found in earlier mahogany work antique bidet table . The knee carving is of acanthus leafage, which was the first stage of development from the shell and husk detail of Queen Anne models ancient greece furniture . The back is the culmination of the stages of evolution shown in Fig scroll planter table y chair . 102, Chapter VI leopold stickly table 1959 . The uprights have only a slight curve—both backwards and sideways—the combined effect of which is to give a sort of serpentine shape when seen from the three-quarter view revolving chipendale bookcase . The right-hand upright shows this clearly antique little silver . The top rail is straight (the word is used in contrast with the full rounded shape of Queen Anne models), and the slight dip at the ends gives an acute corner “18th century desserts” . This detail should be compared with those in Fig 19th century sewing tables with . ioz 1800 furniture desk ivory inlay wood . Tradition, too, is preserved in the retention of the single splat in the back, though it is pierced and carved to give the effect of a series of interlacing straps and scrolls buy antique pembroke inlaid table .
An innovation of the Chippendale period was that of the square leg office chair french . In some cases it was completely plain, but as a rule it was moulded along its length as in the chair in Fig i8th century english silver table . io8 metal borders friezes fretwork . In section the moulding was usually a double ogee, and at the top it was cut away to leave a plain flat surface to which the upholstery materials could be fixed antique desks by wilkinson and son . It should be noted that in this type of chair the stretcher rails are introduced once again antique oval table with middle drop leaf . The shaping of the back is similar to that in Fig antique wheel engraved glass patterns . 107, though the splat is rather more reminiscent of an earlier pattern like that in Fig arts and crafts liberty of london oak furniture . 102 george 1 style mahogany stool .
At the same time that these fine chairs were being made for the fashionable people in town a simpler form was being turned out in country districts black lacquer armchairs . Sometimes these were in mahogany, but quite a number were made in beech or even oak and stained to resemble mahogany english fcbinet makers 19th century . Fig antique telescopic dining tables . i i o shows a Oriental and Gothic Influence
chair of this kind “liberty furniture” . The legs are plain and the back splat has the simplest possible piercing voysey furniture . As a rule these chairs have a certain coarseness and heaviness about them, and are obviously the effort of a man working in an unfamiliar element augsburg marquetry table cabinet .
A particularly effective pattern of chair was the ladder back shown in Fig furniture ornaments ny . iog mahogany inlaid console table . It was a completely new departure so far as the cabinet maker was concerned, though it may have had its origin in some of the tall back chairs made in the latter part of Charles 11 reign sideboard lacquer mother of pearl . These often had a series of plain horizontal slats, with shaped edges fitting between turned uprights antique table with off centered middle leg . In the present chair the slats are pierced as well as shaped, and are fitted to the characteristic curved uprights 19th century german furniture makers . It will be seen that the same straight moulded legs are used as in Fig jacobean monks chair . ic,8, and the curious fact may be noted here that, except for one or two occasional variations, the same pattern of moulding is used practically always in these chairs prohibition parlor clock . It seems rather odd that a trade convention, or whatever it may be called, was so strong that almost every chairmaker followed it american art deco bar furniture .
Chinese Influence duncan table claw drop leaf drawer .—A rather curious influence that took a considerable hold on the world of furniture after the middle of the century was the Chinese curule friedrich schinkel . There was a popular rage for things oriental at the time ; Nvalls were covered with Chinese wall papers, and Chinese pottery was in demand jourdain modernist chair . Sir William Chambers had made a visit to China and on his return published a book of drawings of oriental studies exoticism, furniture . Its effect on furniture was the introduction of such motifs as temples, bells, lattice work, and elaborate frets, the whole often being seasoned with a strong French feeling art nouveau and august endell . In mirror frames especially the intermingling of the Chinese and French was strongly marked serrurier-bovy, silex . A chair having its origin in the popularity of this Chinese style is shown in Fig antique french candelabra . i i i black amethyst dishes . Note in particular the detail in the back and the frets of the rails berkey & gay american empire furniture . Furniture treated in this way is often spoken of as Chinese Chippendale, but it will be realised that it is only a rather bizarre adaptation of a few Eastern motifs to typical Western work, and is not really Chinese in feeling clock 1700th century wood . Chippendale shows a number of chairs of this kind in his book reproduction potboard dressers .
Oriental and Gothic Influence
chair of this kind inexpensive antique wardrobes . The legs are plain and the back splat has the simplest possible piercing antique sideboard 1825 . As a rule these chairs have a certain coarseness and heaviness about them, and are obviously the effort of a man working in an unfamiliar element value of empire style china closet 1910 .
A particularly effective pattern of chair was the ladder back shown in Fig antique shaving supplies quartz . iog antique furniture “made in france” coffee table art deco . It was a completely new departure so far as the cabinet maker was concerned, though it may have had its origin in some of the tall back chairs made in the latter part of Charles 11 reign art deco silver train straight on view image . These often had a series of plain horizontal slats, with shaped edges fitting between turned uprights turn of the century drop leaf table imperial . In the present chair the slats are pierced as well as shaped, and are fitted to the characteristic curved uprights curved walnut dining chair . It will be seen that the same straight moulded legs are used as in Fig baltimore & annapolis 18c cabinet makers . ic,8, and the curious fact may be noted here that, except for one or two occasional variations, the same pattern of moulding is used practically always in these chairs rent baroque wood carving furniture . It seems rather odd that a trade convention, or whatever it may be called, was so strong that almost every chairmaker followed it french antique writing secretaire .
Chinese Influence thonet rail styles .—A rather curious influence that took a considerable hold on the world of furniture after the middle of the century was the Chinese antique english tea tables . There was a popular rage for things oriental at the time ; Nvalls were covered with Chinese wall papers, and Chinese pottery was in demand arita porzellan in deutschland kakiemon . Sir William Chambers had made a visit to China and on his return published a book of drawings of oriental studies andre hunebelle glass . Its effect on furniture was the introduction of such motifs as temples, bells, lattice work, and elaborate frets, the whole often being seasoned with a strong French feeling “john dwight” potter fulham . In mirror frames especially the intermingling of the Chinese and French was strongly marked philadelphia chippendale antique dining . A chair having its origin in the popularity of this Chinese style is shown in Fig inexpensive french desks furniture . i i i porcelain figures of famous people . Note in particular the detail in the back and the frets of the rails 19th century american rosewood rococo console table . Furniture treated in this way is often spoken of as Chinese Chippendale, but it will be realised that it is only a rather bizarre adaptation of a few Eastern motifs to typical Western work, and is not really Chinese in feeling early imperial ming porcelain . Chippendale shows a number of chairs of this kind in his book painted silver trays .
FIG 18th century forks . 117 antique wrought iron candle sticks . SIMPLE BUREAU IN MAHOGANY 4 section antique cutlery box .
About 176o antique monk’s table .
The drawer fronts are edged with a cocked bead, and at the front corners
quarter-round turned pillars are inset cabinet maker 1840s .
FIG decorative writing styles . 118 bureau furniture . WRITING DESK WITH LEATHER COVERED TOP old fashioned wooden tray with silver legs .
About 1765 when were tea tables first used .
The moulding above the knee space is carved, a common feature of
Chippendale work antique metal tables with drop leaves . This would have been Impossible in walnut work
because the moulding was built up with a thin layer of walnut louis xiv roll top desk .

Walnut Period
MARQUETRY
We have had occasion to refer to this form of decoration, and we may here conveniently explain what this was. We saw in Elizabethan and Jacobean work that inlay was used considerably as decoration. This consisted of recessing out a solid background to a depth of-in, or more and insert-
ing pieces of wood of a different kind from that of the background. The whole point about it was that it was cut in the solid and that the recesses had to be chopped out with chisel and gouge. With solid work there was no other alternative.
We saw also that a new method of treatment was introduced in the form of veneering, and the coming of this enabled an entirely new method of ” inlaying ” to be used. In this the inlaying was done in the veneer before being laid, and, although this at first may not seem to carry with it any special advantage, it did in reality make a tremendous difference, involving an. entirely new technique. The reason for this was that the veneer, being thin, could be cut out with a saw instead of having to be laboriously chopped away with the chisel. A comparison is that of fretwork. The reader knows what fine sweeping curves can be cut with the fretsaw, But imagine how limited the result would be if all the spaces had to be chopped away with the gouge !
This use of the saw, then, in itself made a tremendous difference in the designs that could be cut, but there was more in it than this. By fixing together two sheets of veneer of different kinds of wood and cutting through them at the same time both would have exactly the same design. Thus it was only necessary to separate the sheets and interchange the parts and a perfect fit was obtained.
It was obviously necessary to use an extremely fine saw blade—it was very like a fretsaw blade—and it had to be held so that it would cut a trifle out of right angles with the veneer, so that the one sheet would be a trifle larger than the other, thus ensuring a tight fit. To ensure this a special sawing bench, known as a ” donkey,” was made. The worker sat astride and rested the feet on a treadle connected with a vice above which gripped the veneer. The saw frame was horizontal and was worked with the right hand, whilst the veneer was moved about with the left. When the whole design had been cut it was assembled on a bench, the parts being interchanged as required. Any shading required was done by dipping the parts into hot sand. The whole was then glued to a sheet of paper and handed to the cabinet maker for gluing down,
It was first used about 1675, and the early efforts were in comparison crude, consisting for the most part of flowers, leaf and scroll work arranged in a conventional design. A few years of experience, however, made the workers extremely skilful, and they began to produce some extremely elaborate patterns, known usually as seaweed marquetry, in which the detail was very fine. Curiously enough, however, marquetry did not retain its popularity for very long, for in Queen Anne’s reign plain walnut was mostly used in which the beauty of the grain, combined with cross-banding, provided the decorative appearance.
TABLES
It is a remarkable thing that there do not appear to have been made any large dining tables in the walnut style during the reigns of either William and Mary or Queen Anne. Possibly it was that the cabinet makers found a serious difficulty in veneering such large tops owing to the liability of the groundwork to shrink and split. They never used walnut in the solid except for such parts as legs and turnings. However this may be, one can only draw the conclusion that the old Jacobean table in oak continued to be used, and a strangely inconsistent arrangement it must have seemed.
Small side tables, card tables, and so on, were made largely, and two examples are given in Fig. 93. That to the left belongs to the William and Mary period (note the inverted cup turned legs and flat stretchers), and the other is a later type made in the early years of the eighteenth century. Card tables were similar in appearance, the top being made double so that it would open out to form an approximately square shape. The two back legs were pivoted so that they could pull out and support the overhanging top. Cards had become an extremely popular form of amusement at the period.
LACQUERED FURNITURE
Mention has already been made of the increased trade with the East resulting in the importation of Oriental pottery. Other items imported were lacquered cabinets of Queen Anne Bedsteads
entirely Chinese workmanship. These were plain rectangular cupboards with the interior fitted up with small drawers and cupboards. To be of practical use in a Western room they needed mounting upon a stand, and it therefore became the custom to import the cabinets and to make special stands for them which were either gilt or silvered. Fig. 95 is such a cabinet and stand, and shows the elaborate carving with which the stands were invariably decorated. Later it became customary for the lacquered cabinets themselves to be imitated in this country—in fact lacquering became a popular craze for people of leisure to take up. A Treatise on japanning and varnishing was published by Stalker and Parker which purported to explain the whole art of lacquering, but no lacquering was ever produced here which could in the slightest degree compare with the true native oriental work.
The craze for lacquered work quickly spread to other forms of furniture, and clock cases, bedsteads, and cabinets of all kinds were made in beech and lacquered in various colours. Red and black were the chief shades. Sometimes existing cabinets which had been finely veneered with walnut were lacquered over to satisfy the fashionable craze.
THE BEDROOM
The wooden bedstead of Jacobean times was replaced by the material-covered type in the William and Mary period, though as early as James I’s time the fashion of covering over the woodwork entirely with tapestry, plush, and other materials had become popular—at any rate amongst the people of leisure. One of the rooms at Knole House, Seven-oaks, was refurnished specially in honour of a visit by James I, and the bedstead is of the covered type.
Fig. 96 shows a covered bedstead dating from about 1700. Note that the cornice is made up of a number of short pieces of moulding mitred together, some straight and others curved. The material is strained over these. The actual wood used was generally beech and oak, except the exposed feet which were of walnut.
Other pieces used in the bedroom would be the chest of drawers, usually a tallboy, with which we have already dealt, or a wardrobe or press, which in appearance was somewhat similar to the secretaire in Fig. 83, except that the upper carcase was fitted with two doors instead of the fall front.

Walnut Period
CHINA CABINETS
It was probably Queen Mary who set the fashion for collecting china. Trade with the East brought about the importation of Chinese pottery and it soon became a popular craze for people of wealth to collect fine specimens. Cabinets to contain them followed as a matter of course, and it was therefore in the last quarter of the seventeenth century that the first china cabinets were made. An example is given in Fig. 85. There are many typical features about it ; the turned legs with the inverted cup detail, the apron piece finished at the edge with a cross-grained bead, the flat stretcher rails, the cross-banded doors, and the shaped cornice, also cross-grained. Glazed doors were essential, and in them we have an early example of the barred door.
The probability is that in the first instance the bars were not purely decorative. Panes of glass in a large size were difficult to produce, and the method of subdividing up the space with bars to enable small panes to be used suggested itself as a solution to the difficulty. In the event it proved extremely successful as a form of decorative treatment ; so much so that during the eighteenth century bars were used in various designs almost as a matter of course. It is just another example of the way in which advantage can be taken of the limitations of material to produce an effect which not only looks well but seems characteristic of the work.
MIRRORS
Whilst on the subject of glasswork, we may turn to the mirror, which was first made in fairly large quantities towards the end of the seventeenth century. Earlier examples are in existence, but they were mostly made in Italy and imported, though a few Italian craftsmen settled in the country early in the seventeenth century and began producing in a small way. The chief impetus came later, when works were established by the Duke of Buckingham in London. Mention of them is made by Evelyn in his diary of 1676, when he paid a visit to them.
Two examples of hanging wall mirrors are given on p. III. That to the left is perhaps the more usual type. The actual framework is a rather flat moulding with the grain running crosswise. Typical sections of the mouldings used are given on p. 125 at the bottom, left. They were built up on a foundation of pine or oak to provide the strength, and the walnut was glued to the upper face in  LACQUERED CABINET ON STAND.
Second half 17th century.
Oriental cabinets were frequently imported, and carved stands were
made to hold them. Later rather crude imitations of Oriental lacquer
were attempted here.
cross-grained strips. The section was then worked as in an ordinary moulding. Usually the top corners were either rounded, as in Fig. 86, or they had the rather typical series of short squares and curves, such as in the door in Fig. 84. The fretted pieces at top and bottom are invariably found in such mirrors.

The other example, Fig. 87, is of quite different feeling, having an architectural character probably inspired by the details found in the windows and doorways of the period. The groundwork is in walnut and the carved mouldings and details are gilt. Both types were produced in fairly large quantities, and the size was invariably small for the reason already given. In addition, small toilet glasses were made, these having either a plain stand with uprights between which the mirror was pivoted, or a small nest of drawers to hold cosmetics arranged with the uprights tenoned in above.

WALNUT PERIOD
HAVING seen in the last chapter how new methods
of construction enabled a far more refined kind of
furniture to be made, we may now turn to the actual pieces that were produced from the Restoration up to the end of Queen Anne’s reign in 1714. Perhaps the first thing that strikes one is the multiplicity of types compared with what men had known in the first half of the seventeenth century.
It seems that people had come to have a new outlook on life and were demanding an altogether more luxurious way of living. Perhaps a fair comparison is the way that the average man’s point of view has changed since 1913. Not that the results have been the same, but the Great War and all that it brought with it set men’s minds working along fresh channels. In 166o it was the Restoration instead of war that prompted the change, and in comparison the changes were even greater.
For one thing there was the reaction from a stern, rigorous form of government to one of licence and laxity. For another there was the strong foreign influence which came as the natural result of the accession of a king who had spent most of his life abroad, soon followed by the reign of a king who actually was a foreigner. The remarkable thing is that the resultant style was not more extravagant than it really was. As it turned out, the walnut period was notable rather for its restraint and dignity, especially in its later stages. The probable reason was that William of Orange did a good deal to check the depraved condition into which the court of Charles II had fallen.
Amongst the pieces that made their first appearance during the walnut period were china cabinets fitted with glass doors, bookcases (also often glazed), writing cabinets, chests of drawers, mirrors, tall clock cases, card tables, and various cabinets elaborately fitted up with small drawers and cup-boards. To these may be added chairs with fully upholstered seats and backs. These introductions in themselves reflect the altered conditions, and show that people were no longer content with things which had to answer several purposes. Consider how in earlier days the chest had served as a seat, table, and travelling chest ; or the dining table for every possible purpose for which a table could be needed. By the end of the seventeenth century people indulged in the luxury of collecting china, hence the cabinets for the purpose ; they spent their leisure in playing cards and so needed card tables books were more plentiful, making bookcases essential and they required not one chair and a few stools in a room, but a full set so that everyone could be comfortable.
CHESTS OF DRAWERS
We saw in Chapter III how the chest developed into the chest of drawers, and it is interesting to make a comparison between the Jacobean type in Fig. 53, p. 66, and the Charles II example in Fig. 70. In date there are not many years’ difference between them, but whereas the former is entirely in oak and is made in the old traditional way, the other is of veneered walnut with a flat stretcher and legs of a kind that are not only entirely new in form, but involve a fresh form of construction. From the constructional point of view it is certainly not an advancement upon traditional methods in which the stretcher rails would be strongly tenoned into the legs. As it is the shaped legs have a hole bored at each end, the top one holding a dowel which passes into the bottom of the chest, and the other taking the projecting dowel of the foot, the stretcher fitting between. It is worth taking particular note of this flat stretcher with the foot beneath because it became very popular in the late years of the seventeenth century.
A glance at the chest itself shows that in construction and form it bears out the changes dealt with more fully in the last chapter. The drawer fronts are flat, and around the edges is a herring-bone banding, a typical ” walnut ” feature. One special note of interest is that along the drawer rails and front edges of the ends is a flat half-round moulding with the grain running crosswise. Charles II and William and Mary work often had this feature. Later it declined, its place being taken by a cocked bead fixed around the edges of the drawer fronts. The latter was really a more practical idea because the bead helped to protect the edges of the veneer, preventing the latter from being chipped away.
Cross-grained Mouldings.—Mention of the cross-grained bead brings us to another feature which was used almost exclusively in walnut work, the cross-grained moulding. It will be appreciated that to make a solid cross-grained moulding would not be practical. It would have no strength, it would be liable to twist, and it would certainly shrink. The plan was therefore adopted of applying a thin strip of cross-grained wood to a solid groundwork, the grain of which ran lengthwise. The groundwork provided the strength and the thinness of the layer had sufficient
give ” to overcome the shrinkage difficulty.
If the moulding were extra big the work would be allowed to stand until full shrinkage had taken place, when the inevitable splits would be filled in. All but the smallest mouldings were made in this way, and even these in the best work were cross-grained. It is a point to look for in an old piece. Fig. 71 shows how a cornice moulding was built up, and the plate on p. 125 gives a number of sections, in some of which the facing layer of walnut is also shown.
A rather later chest, dating from about 1690, is given in Fig. 72, and it will be noticed that, although it embodies many similar features to the chest in Fig. 70, it is of altogether better proportions and approaches a period when walnut furniture was at its best. The drawer fronts are veneered and have the herring-bone banding around the edges, and there is the half-round moulding on the drawer rails and cabinet ends. The frieze of flat rounded section veneered with cross-grained walnut should be noted because a great deal of walnut furniture had this detail. It was copied from the cornice and frieze built in many houses of the period. Turned legs with the inverted cup shape are peculiar to William and Mary pieces, and, although other shapes were used, they are usually a good indication of the period. Note that the flat stretcher similar to that in Fig. 70 is still used.
One other point to note is that the veneering has the effect of hiding the construction almost entirely. Take the stand, for instance. There is no indication of where the rails are joined to the legs. This is in contrast with the older oak furniture in which all the joints were apparent, and in which the grain always ran in the direction which strength demanded. The appreciation of points such as this enables one to understand the root of the changes that were taking place.
Tallboys.—Two other chests are given in Fig. 73. That to the left is late seventeenth century, but the other is of Queen Anne’s reign and shows the final development of the walnut period. It is a close approach to that delightful looking, but rather impractical, article the tallboy chest. Presumably men felt that the drawer was so extremely useful (and it undoubtedly was) that the more they could fit into a piece the more useful it became. It was like many another good idea, spoilt by being taken to extremes. Any reader who has possessed one of these tallboys will appreciate the nuisance of having to mount up on a chair to reach the contents of the top drawers.
In this chest we also have a feature which we shall frequently run across in Queen Anne work, the apron piece. This is the shaped rail joining the legs beneath the lower drawers. It appears in the chest in Fig. 72, and in the left-hand example in Fig. 73. It was the natural result of the introduction of veneering, or, to be more accurate, it was a detail which was made possible only by veneering. If, for instance, the veneer were stripped off, the joints of the various rails would be exposed with the applied apron piece showing beneath. Such an arrangement would be unsightly, but when covered with veneer makes an attractive and characteristic feature. Sometimes the shaped edges were covered with a cocked bead. The chest in Fig. 72 has this detail.
One other outstanding feature of this chest, Fig. 73, is that in it we have the first introduction to the cabriole leg which enjoyed so vast a popularity in the eighteenth century. We shall deal with this more fully presently when we come to speak about chairs, but it is worth while noting its use in pieces of this kind.
Drawer Construction.—In all these chests, the drawer sides, backs, and bottoms were invariably of oak. Walnut was still a comparatively rare wood—it was probably not planted in this country until Elizabeth’s reign—and on that account was costly. Furthermore oak was the better calculated to withstand the wear inevitable on the sliding surfaces. Oak was also used for the groundwork of the drawer fronts, though there was a tendency to use pine for the purpose, because experience showed that oak did not grip the glue as well as pine. Also, the figure in the oak was liable to show through the veneer eventually because of the shrinkage of the softer parts of the timber. However, it is no criterion, for both were used for the purpose.
When a walnut moulding was required at the edges (except in the case of the cocked bead) a slip of cross-grained walnut was first let in all round and the veneer laid over this. This enabled the moulding to be worked in the walnut at the edges. It was unnecessary in a cocked bead, for this could be applied afterwards in a rebate worked for the purpose.

FIG. 70. WALNUT CHEST OF DRAWERS ON STAND.
About 1670.
The upright grain of the veneered drawer fronts, the herringbone banding,
the cross-grained bead on the rails, and the flat stretchers are typical
of the period.

FIG. 71. HOW CROSS-GRAINED WALNUT
MOULDINGS WERE BUILT UP.
Strips of cross-grained walnut are glued to a
groundwork of pine or oak.

FIG. 72. WILLIAM AND MARY CHEST OF DRAWERS ON
STAND.
The inverted cup turned legs and flat stretcher were extremely popular at the period. The rounded frieze continued into the Queen Anne period.

TABLES OF THE SEVENTEENTH CENTURY (FIRST HALF)
The Elizabethan table, either of the draw or fixed top type, continued with little variety in form during the reigns of the early Stuarts and Cromwellian times. The legs were of the heavy bulbous turned kind, generally carved, though the tendency as the seventeenth century progressed was to thin down the turning and omit the carving. In the full bulbous early Jacobean leg extra pieces were glued on at all four sides to provide wood for the required thickness. This can be seen clearly in the table in Fig. 23, P. 29, in which the squares at top and bottom of the legs show the original thickness of the wood. Later Jacobean legs were usually no thicker than could be turned from the squares of wood with no extra applied pieces. Fig. 44 shows a table dating from about the middle of the seventeenth century with turned baluster legs of this kind.
Up to this time the chief, and practically only, use of a table was that of dining, and now that people were settling into a more comfortable way of living the usefulness of a smaller form of table must have become felt. For instance, in the smaller private rooms a huge draw table was unnecessary, yet some form of table was essential. Again, in the smaller houses there would not be room for the large dining table, yet a fairly large one would be needed to seat everyone at meals. The result was the introduction of the gate-leg table, with its circular, oval, or rectangular top divided into three pieces, the centre one of which was fixed to the main framework, the others being hinged to it.

That in Fig. 46 is an example of the better kind, the legs being turned and the whole thing framed together with mortise and tenon joints. A cruder example is that in Fig. 45, in which the uprights are merely solid pieces with a rather crude shaping cut at the sides. The ” gates,” too, are made up from plain strips of square wood.

VARIOUS CABINETS
There were two kinds of cabinets chiefly in use in Jacobean dining-rooms, the Court cupboard and the buffet, with its three tiers open at all sides. Both of these came into use in Elizabethan times, and we now come to the form they took in the seventeenth century. It is instructive to turn to the Elizabethan example of a Court cupboard on p. 38 and compare it with its Jacobean counterpart in Fig. 48. In the former the upper stage is canted at the sides, and the turnings are of the full bulbous kind, richly carved all over. In the later example the upper stage is rectangular and is recessed only slightly, and the turnings are considerably smaller and are plain. In this they follow the tendency already noted in regard to the legs of tables. As the century progressed the turnings became mere pendants beneath the frieze without reaching down to the lower part of the cabinet. This was the final stage of the Court cupboard. It died a natural death during the second half of the century, for it was essentially a piece for the well-to-do man, and when walnut came into popularity it just disappeared.
It was in a different class from the dresser, which belonged more to the farmhouse, and which continued to be made even throughout the eighteenth century. Such a dresser is given in Fig. 49. It may be noted in passing that this was evolved directly from the side table of the kind shown on p. 34. There was no upper staging of shelves, the latter being added later when plates and dishes became more plentiful.

A smaller item that may be mentioned here is the Bible Box, see Fig. 50. Every family of any note had its Bible in those days, and it was a most treasured possession. A place in which it could be kept safely was desirable, hence the various small boxes which have survived. Some of them were provided with a stand and a sloping lid upon which the Bible could rest at a convenient angle when being read. In the finer specimens the fronts were carved with the usual conventional floral work as in the examples given.

Occasionally one finds the interior of these boxes fitted up, probably for the purpose of holding deeds and other valuable papers. It is possible that some were intended specifically for the purpose of writing, but against this there is the fact that few people could write in the seventeenth century, and it would have been most uncomfortable to write at, being far too high. Reading was the more probable purpose of the sloping top, any writing that was done being incidental.

FIG. 49. FARMHOUSE DRESSER WITH PLATE RACK.
Second half 17th century.
Although made in oak there are features which suggest the walnut
period, specially in the shaped headings to the upper cupboards. The
turned legs, however, are purely Jacobean.

FIG. 48. COURT CUPBOARD IN JACOBEAN TIMES.
Mid. 17th century.
An interesting comparison can be made with the cupboard on p. 38. Note the substitution of thinner and plain turnings in the upper storey.

FIG. 50. SMALL BIBLE BOXES AND DESKS.17th
century.
The object of the sloping lid was probably to provide a convenient rest
for the Bible when being read, though it is possible that some were
intended for writing.

CUPBOARDS AND SIDE TABLES
It is a rather curious reflection that so many years should have passed without men having devised any means of locking things away privately except in a chest. It tells its own story, that they should have preferred to use something which could be used conveniently for travelling. Once they came to establish their homes on a more convenient basis, however, the necessity for cabinets to hold valuable or private papers, and cupboards to store various other items became felt. Thus wall furniture became increasingly common.
The early form of side table is given in Fig. 26, a piece dating from about I Soo or soon after. It is virtually a chest, with the corner posts continued downwards to raise it well up from the floor. This was probably its origin. Not that a man, having a chest, would decide that by lengthening the posts he could evolve a sideboard, but that the method of construction was automatically adopted once the idea of a sideboard was thought about. There was probably a subconscious connection between the two ideas, so that it is likely that there was a direct evolution from one to the other. The side table exemplifies the use of the pierced panel, and another point that will appeal to practical readers is the use of the ” mason’s mitre ” in the moulding surrounding the panel. The use of this is explained more fully on p. 44•
Another kind of furniture of the early Tudor Gothic period was the cupboard pure and simple as shown in Fig. 27. It is of the simplest possible construction, consisting of so many boards pegged together and held by the angle plates and strap hinges. Often such cupboards had panels pierced with Gothic tracery designs such as those given on p. IS. In fact A is taken from an old cupboard of the kind. Their purpose was probably to hold food, as the pierced panels gave ventilation.
Of a similar type, but of infinitely better construction, is the cupboard shown in Fig. 28. In place of the planks is a framing of four posts, joined by rails with grooves around their edges to hold panels. Here the last-named are pierced and carved in the form of Gothic windows.
The Court Cupboard.—The development in Elizabethan times is shown in the Court cupboard in Fig. 29. This is worthy of a few moments’ attention because it contains many typical features of the period. It was a cupboard which became extremely popular, probably because it gave good accommodation and there was excellent scope for decorative treatment. Note first the lower doors with their three-panel arrangement. Apart from strength, this had the advantage of keeping the panel width down, and so saving the necessity of jointing up. The framing is channel-moulded ; that is a shallow groove moulded at the sides is worked along the centre of each member.
Incidentally, whilst on the subject of mouldings, it should be noted that in every case they are worked ” in the solid,” the substance of the framing being moulded. It is mentioned here in particular because it will be seen in the next chapter that the tendency in the following century was to use applied mouldings instead.
Attention has already been drawn to the bulbous turnings and their elaborate carving, Fig. 29, and we may now turn to the upper cupboard portion with its sloping sides. It was probably the desire to make space for the bulbous turnings that prompted the cutting away of the cupboard, and at the same time to provide a useful standing space at each side. It will be found that when, later, turning began to decline, the upper cupboard became rectangular in shape, being just set back a few inches from the line of the lower cupboard. Eventually the turnings disappeared almost entirely, being replaced by single drop turnings—but of this we shall see more in the following chapter. It is mentioned here because it helps to explain the reason for the shape of the upper cupboard. The carving in the frieze is a typical Elizabethan detail which continued into the seventeenth century.
BEDSTEADS
Sleeping arrangements in the early years were of the simplest and most primitive form for everyone except the chief persons in the household. The fifteenth century saw considerable improvements in this respect, though it was not until the next century that beds became at all common. There were two kinds, the panelled head and foot (very like the modern form of wood bed), and the four-poster. The last-named developed into a really amazing structure in the time of Elizabeth. That the rooms were abominably draughty is the probable reason for its popularity. The tester or panelling above the bed was hung all round with curtains, so that the sleeper was literally lying in a little room built within the main bedroom. It must have been close and unhealthy, but presumably people preferred that to draughts.
That great importance was attached to these bedsteads is shown by the frequent reference made to them in old wills, and in view of the amount of work put into them they must have been costly things to produce. That in Fig. 31 contains features found in most old beds. Note that the bed frame itself is separate at the foot from the front posts. This was usual in Elizabethan beds, though towards the end of the century the tendency was to join them up.
Figs. 32, 33, and 34 will prove of particular interest to practical cabinet makers and draughtsmen, though they are well worthy of the attention of all students because the sections of mouldings and carved details are extremely important factors when dating a period piece.

Antiques: Furniture, Tables, Cabinets, 18th Century Furniture, Art Deco Furniture Recently Featured at Antcollectors (3)

Early 19th Century Chairs

ALL “THE CHARACTERISTICS oF Regency
and Empire furniture, from the Neoclassical motifs – often on pierced backs – to the choice of timbers, are displayed on early 19th-century chairs.
One of the most typical types of chair of the period is the Trafalgar chair, which was made in Britain and used for dining. The chair had two horizontal splats – one usually of bar form, the lower one sometimes a rope-twist, set above a caned or drop-in seat. Caning, with all its exotic overtones, was revived again during this period, particularly on British or Cape furniture. During the first two decades of the century the front and back legs were usually of sabre form, but turned or ring-turned legs, which are Structurally stronger, were used later.
These chairs, and many that they inspired, were often made of solid mahogany or rosewood, with veneered
panels on the bar back. Beech was used, and was often painted; light-coloured woods were favoured outside Britain. Chairs from this period rarely had stretchers.
One type of armchair, inspired by Georges Jacob, had a rectangular, scrolled, upholstered back and open arms with straight supports, often carved with sphinx heads or female masks. It also had turned and tapered front legs. These more comfortable fauteuils might be used in the drawing room, whilst Regency bcrgeres, which had caned backs, sides, and seats, were probably made for the library. These chairs had squab cushions, often covered in leather and buttoned. Other pieces might be upholstered in silk or velvet. Needlework was rare, although a suite of furniture from the Winter Palace in Russia, was covered in tapestry, in a mixture of wool and silk.

ENGLISH TRAFALGAR CHAIR
FRENCH DIRECTOIRE CHAIR
This Regency mahogany dining chair has a plain top rail and a rope-twist back rail. The needlework-covered drop-in seat is supported on a plain seat rail and sabre legs. One of a set of four. Early 19th century.
This is one of a pair of Directoire side chairs, each with a rectilinear back rail and splat inlaid with brass musical instruments. The upholstered stuffover seat is supported on sabre legs. c.1800.
SWEDISH BIEDERMEIER ARMCHAIR
CHINA TRADE ARMCHAIR
This birch open armchair has a stepped yoke backrest with a decorative oval inlay and scrolled armrests. The drop-in seat has a plain seat rail and is raised on sabre legs. c.1825.
This Asian hardwood armchair, has a Greek-key carved top rail and a shaped, carved back rail. The cane seat rests on a reeded seat rail above slender reeded legs joined by an T-stretcher. Early 19th century.
All the surfaces of the chair are carved and decorated in shades ofgreen, blue, and red, highlighted with gold.
INDIAN THRONE CHAIR
This polychrome-painted, ivory-veneered chair is in an exaggerated Regency style. It has an arched, slightly panelled back with a reeded top rail, carved uprights, sabre legs, and paw feet. c.1830.

AMERICAN FEDERAL SIDE CHAIR
This walnut and fruitwood side chair has a gently reclining back with a rectangular top and back rail. The padded seat is supported on a plain seat rail above stylized cabriole legs. Early 1901 century.
These Biedermeier mahogany-veneered dining chairs were made in Berlin. Each chair has a bar top rail, a solid, shaped back rail with a central oval, and elegant, slightly sweeping uprights. The shaped caned seats are set
within a curved frame with a rounded seat rail and are supported on tour outswept sabre legs. 1820-30.
This mahogany side chair has a moulded and rope-carved shield back around an urn, Princeof-Wales feathers, draped swags, and leaves. The serpentine seat rests on reeded, tapering legs. Early 19th century.
FRENCH RESTAURATION CHAIR
GERMAN BIEDERMEIER CHAIRS

AMERICAN GONDOLA CHAIR
ITALIAN GONDOLA CHAIRS
GEORGE III SHIELD-BACK CHAIR
This is one of a pair of Neoclassical figured mahogany gondola chairs, each with a curved back and vasiform, solid splat, a padded slip seat, and downswept stiles continuing into shaped sabre front legs. c.1830.
These six dining chairs are made of walnut and are designed in the Neoclassical style. Each chair has an unusual fluted, rectangular backrest positioned above a pierced, stylized leaf border. The cane seats have an applied
roundel at each side and are supported on plain seat rails. The chairs are raised on sabre legs. The elegant sweeping uprights give the chairs their characteristic shape, which is reminiscent of the style of the gondola boats found in Venice.
Early 191h century.
This mahogany armchair has a shield-shaped, curved back, outlined with guilloche moulding, with five reeded splats, curved downswept arms, a bowed seat rail, and reeded, tapering front legs.
RUSSIAN OPEN ARMCHAIR
AMERICAN DINING CHAIRS
SWEDISH GUSTAVIAN SIDE CHAIR
This birch open armchair has a stepped yoke backrest, with carved fan detail, and slender, scrolled armrests. The upholstered seat is raised on sabre legs. It is one of a pair. Early 19th century.
These eight Neoclassical-style dining chairs are made of mahogany. Each chair has a flat curved top rail carved with a foliate pattern and a slender horizontal splat, also decorated with leaf carving, plus a rosette. The seats
are upholstered with black Naugahyde and are showing considerable signs of wear. The seats are supported on plain seat rails and raised on sabre legs. The armchairs have gently curving supports. The set comprises two armchairs and six side chairs, and is attributed to Anthony Quervelle. c.1820.
This white-painted side chair has a shield-shaped back with a solid, carved splat. The padded seat is supported on a moulded seat rail and is raised on stop-fluted legs joined by an H-stretcher. Early 19th century.

Antiques and Antique Furniture at Antique Shop UK: Tudor Antiques Centre
UK based antique furniture supplier offers> decorative antique furniture such as antique chairs, antique tables, antique dining tables, antique occasional tables, antique bookcases, antique chest of drawers, antique dressers, antique cupboards, antique desks and antique coffers. Also offers decorative antiques likes antique mirrors, antique lighting, antique metalware, antique paintings and antique ceramics at Tudor Antique shop in Sussex.

Antique Tables UK: Farmhouse Tables - Antique Dining Tables - Antique Kitchen Tables
Antique tables supplier in UK offers farmhouse tables, refectory tables, antique dining tables and antique kitchen tables like antique oak tables, trestle tables, cherry tables, ash tables, elm tables, fruitwood tables, chestnut tables and walnut tables. Other antique furniture and antique furniture restoration service also available.
Antique Furniture - Oak Furniture - Antique Oak Furniture - Oak Antiques
Period Oak Antiques, Antique shop in UK offers antique furniture and oak furniture which mainly includes antique tables, antique chairs, antique cupboards, antique dressers, antique chest of drawers, antique coffers and antique four poster beds. Apart from oak antique furniture, we also sell antique carvings, antique metalware, antique delft and antique oil paintings.

>Antique Furniture Upholstered Furniture - Regency Furniture - Georgian Furniture
Antique Furniture supplier offers English antique furniture like regency furniture, Georgian furniture and upholstered furniture which includes antique chairs, antique stools, antique dining chairs, antique tables, antique chests, antique linen press, antique desks, antique cabinets, antique bookcases, antique wall hanging furniture and antique mirrors at Thakeham Furniture shop in Sussex, UK.

MID 19TH CENTURY LOW COUNTRIES FURNITURE

THENEOCLASSICAL REVIVAL persisted in
the Netherlands under the auspices of the Waterstaat ministry, who presided over church construction until 1875. This Waterstaatstjil was primarily inspired by Grecian temple forms and became firmly entrenched in the Dutch consciousness, informing furniture design throughout the mid-19th century.
HISTORICISM BY NUMBERS
The interiors of many Catholic churches constructed at this time were decorated in an approximation of the Baroque style, although many of the features were false: plaster vaulting and walls painted to look like marble were common. This falsification was also a feature of Willem II Gothicism, an early Dutch Gothic-revival style that was championed by Pierre Cuyper among others.
Despite having studied under Viollet-le-Duc, the architect of so many sympathetic restorations, Cuyper’s work was more of a pastiche than a genuine representation of the Gothic era. Native oak was used to construct Gothic-revival furniture, often with a similarly scant regard for the fundamental principles of the Gothic style.
INFLUENCES FROM THE EAST The Dutch enjoyed their privileged position as the only Western people to trade with the Japanese until the 1850s. They imported lacquer furniture inlaid with fine pieces of shell, and restrained, plain versions of Western forms such as chairs, tables, and high cabinets finished in the finest lacquer.
Other colonial interests in the region, particularly in Indonesia, provided the Netherlands with fine exotic hardwoods. These were often quite different from the woods used elsewhere in Europe, where they were imported predominantly from the Caribbean and Africa. Dutch cabinet-makers used satinwood from the East Indies to create copies of 18th-century Neoclassical furniture, with slim, tapering legs. metal mounts and fine inlays, and stringing made from contrasting timbers.
A PASSION FOR MARQUETRY The main centres of furniture production in Belgium were Antwerp and Malines. Many of the craftsmen active in these areas were very adept in marquetry techniques, a perennially popular form of surface decoration in the Low Countries. Apart from the appearance of Neoclassical elements in the late 18th century. the distinctive style of Dutch marquetry did not change much from the early 18th century to the end of the 19th century. Ebony, kingwood, satinwood, and other fine and exotic timbers were used to create intricate and arresting floral designs, often in a variety of colours.
This practice was not limited to new furniture – demand was such that these same craftsmen adapted older pieces of plain walnut furniture and made them more saleable through the application of their art. Table tops, drawer fronts, back splats, friezes, and skirts were all considered appropriate places for marquetry design. However, With the advent of mass production in the late 19th century, the quality of the marquetry work deteriorated.
Brass, ebonized, and tortoiseshell mirror This wall
mirror has raised foliate brass decoration centred and surmounted by a mask motif. The bevelled rectangular plate sits within a brass and ebonized frame, which in turn is surrounded with a further panelled and moulded tortoiseshell frame. The piece is Baroque in its overall appearance.
CORNER CABINET
This satinwood corner cabinet is painted to simulate marquetry decoration and has leaf-cast, gilt-brass mounts. The shaped triangular top is centred by an oval panel of oak leaves and has padouk banding. It sits above a frieze
of scrolling roses issuing from a basket of fruit, below which is a single door centred by a putti mask in a panel. The case is raised on pyramidal legs with small, brass bun feet. Predominantly Neoclassical in style, the central mount is
distinctly Rococo in design. Late 19th century.
MARQUETRY CABINET
he rectangular top of this mahogany and marquetry cabinet sits above a single, long gee frieze drawer, below which is a pair of cons, flanked on each side by a pilaster. The ase is supported on a plinth and turned feet.
All the surfaces of the chest are richly decorated with a marquetry design of baskets, flowers, and birds. The moulded frieze drawer is typical of 19th-century designs. The marquetry on the doors is a little awkward but still identifiably Neoclassical in style. Mid 19th century
The cartouche crest is carved
with scrolls and acanthus.
SIDE CHAIR
This early 18th-century-style floral marquetry side chair has a solid vase-shaped back splat and drop-in seat. The shaped seat rail is supported on cabriole legs, which
terminate in claw-and-ball feet. Mid 19111 century DN
The top of the lower cabinet has a serpentine edge.
RECTANGULAR SIDE TABLE
This ebony and floral marquetry side table takes inspiration from the late 18th century. The table top is centred with marquetry birds on an urn and has a moulded edge above a frieze drawer of similar decoration. The table top is supported on spiral-turned legs, joined by a flat cross-stretcher, and terminating in bur feet.
The lower cabinet is bombe in form, which is typical of Dutch furniture.
The moulded cornice is in the Baroque style.
The arched door and shaped edge are a mixture of Baroque and Rococo styles.
The glazed front door opens on to a shelved interior.
The velvet-lined interior is intended for the display of porcelain artefacts.
SPANISH MOORISH DRESSING TABLE
This walnut and ebony dressing table is inlaid with intarsia. The cabinet is surmounted by an arched mirror, at the base of which are two small drawers. A frieze drawer sits above a pair of panelled doors, which enclose a fitted interior. The case stands on block feet with casters. Mid 19th century.
SPANISH CABINET
The parquetry top of this tortoiseshell, mother-of-pearl, and walnut cabinet has projecting corners. The case has seven drawers, flanked by free-standing columns, and arranged around a central door and two drawers below. The Moorish influence is apparent in the Arab-style design. Mid 19th century.
PORTUGUESE COMMODE
This is one of a pair of carved Rosewood petite commodes. The exaggerated waisted shape is a very common Portuguese form during this period. The ball-and-claw feet on cabriole legs are taken from mid 18th-century English designs. Late 19th century.

THE GERMAN-SPEAKING world developed its own style years before the modern German state took shape. Although the Biedermeier style had evolved from the Neoclassical movement, particularly the Empire look that emerged from Napoleonic France, it was distinctly Germanic. Its popularity was such that Biedermeier furniture never quite disappeared in the 19th century and a number of popular revivals occurred, particularly in the 1860x. At the same time,
Germany and Austria embraced the same eclectic historicism that was popular throughout Europe during the mid 19th century.
ROCOCO REVIVAL
The Rococo revival was met with particular favour in Vienna, a city whose conservative nature was such that the court had never relinquished the original Germanic Rokoko of the 18th century, and so there was a seamless progression to the revival
style. New processes and technologies ushered in by the Industrial Revolution made it possible to recreate Rococo forms from published patterns at a Fraction of the original cost and in less time, making them accessible to a wider market. Machines cut much finer veneers and carved Rococo ornament for application to carcases constructed from local woods.
One of the pinnacles of the Rococo-revival style was the refurbishment of the Palais Liechtenstein in Vienna,
which made a lasting impression on public taste. Michael Thonet (see pp.284-85), who assisted Peter Hubert Desvignes in this mammoth task between 1837 and 1849, went on to revolutionize the furniture industry in his adopted Austria with his mass-produced bentwood furniture. Other accomplished masters included Anton POssenbacher, whose lavish carved and embroidered chairs for King Ludwig 11 represent the zenith of Bavarian Rococo.
SIDE CHAIRS
These two chairs are from a set of six Biedermeier style, walnut veneered and polished side chairs made in Austria. The curved crest rail is supported on flat supports above a rounded, upholstered seat with lightly sweeping legs. c.1900.
GAMES TABLE
This Louis-Philippe-style mahogany games table has a moulded table top above a serpentine apron with carved finials at the corners. The rectangular table top opens up to reveal a playing surface, supported on a baluster column and four cabriole legs with floral carving. 1850-60.
PRESS CUPBOARD
This massive cupboard is made of oak, and is decorated with architectural style motifs. The design is completely symmetrical, in keeping with the Neoclassical style. The Lipper section of the cupboard consists of a moulded cornice, which projects above a carved frieze. Pilaster supports are positioned either side of two trained doors, which are designed
to resemble those found in Classical architecture. Below this are four narrow drawers. The lower section of the cabinet consists of two small cupboards with heavily inlaid and carved doors, also flanked by fluted pilasters. The whole piece is supported on a base that contains a further four drawers. Such an impressive piece would have belonged to a wealthy household. Late 19th century.
UNIFICATION AND RENAISSANCE Reworking of historical styles was characteristic of German and Austrian furniture design at this time. The same Gothic, Rococo, and Renaissance revivals that informed furniture design in Paris and London diffused through the continent far more quickly after the development of an integrated rail network in the mid 19th century. After the eventual unification of the German states under Bismarck in 1871, there was a general reappraisal of the roots
of German culture, creating a fusion of traditional vernacular design with these wider European trends.
Just as the United States embraced the Neo-Renaissance style after winning their independence from Britain, German designers developed a particular affinity for the style following the Franco-Prussian war in 1871. Known as the Granderzeit, this style continued to be popular into the 20th century, remaining fashionable in some circles in parallel with the
more radical jugendstil. New wealth, industrialization, overseas trade, and colonial acquisitions all contributed to a burgeoning confidence in the
new German state.
GOTHIC STYLE
The German Gothic revival, a lighter and fussier aesthetic than its British counterpart, often featured boullework – a product of Louis XIV’s France
rather than of the
medieval period.
The German version of the Gothic style was more elaborate, making use of multiple colours where the original French version had been predominantly monochrome. A carved oak bookcase designed in Gothic style by Austrian cabinet-makers Bernardo de Bernardis (1808-68) and Joseph Cremer (1808-71) was displayed at the Crystal Palace exhibition in 1851, and afterwards it was presented to
Queen Victoria by Emperor
Franz Josef.
Ebonized cupboard This piece is richly decorated with Meissen porcelain mounts, the most prominent being the oval panel on the cupboard door. They have chased gilt-metal borders and depict courting couples. The cupboard has a rectangular top with conforming gallery and is flanked by four polychrome, floral-decorated detached columns above turned, bulbous feet. c.1880.
PORCELAIN MOUNTS
GERMANY MAY NOT HAVE BEEN AT THE CUTTING EDGE OF EUROPEAN FURNITURE DESIGN IN THE MID I 9TH CENTURY, BUT THE PORCELAIN MOUNTS PRODUCED WON INTERNATIONAL ACCLAIM.
Ever since Meissen produced the first European porcelain, Germany has been a market leader in the ceramics industry. During the mid 19th century, enterprising cabinetmakers undertook to harness this resource and combine it with their own stock-in-trade. Cabinets decorated with porcelain mounts were not an entirely new concept - Oriental craftsmen had been making furniture with applied ceramic plaques For centuries, although their minimalist designs
were a far cry from the elaborate models produced in Germany. In France, Sevres plaques had been used to adorn cabinets on occasion, but it was in Germany that the most celebrated examples were made.
The carcases of these cabinets were roughly constructed from pine in Renaissance forms. An ebony veneer or, more usually, a coat of black paint provided a suitably dark ground on which to mount elaborate porcelain plaques, pillars, and feet: the dark wood acted as a foil to the richly decorated white ceramic. The best examples, many of which came from the Meissen factory, were hand-painted with scenes taken from 17th-century paintings with antiquarian or folk themes. The public appetite for these cabinets was vast, and William Oppenheim won widespread acclaim for an example he exhibited in Paris in 1878 For the Royal Dresden Factory.