Posts Tagged ‘cabriole’

Antique 18th-19th Century Commodes

THE COMMODE EVOLVED slowly during
the late 18th century, only gradually incorporating Neoclassical elements into its design. In its early transitional stage, in the 1760s, its shape retained many Rococo features, such as rounded corners and cabriole legs, but, the
case became more rectangular and the decoration Neoclassical. However, by the 1770s, the shape of commodes had also been refined, as commodes became plainer and more linear in design, with straight legs. Their angular shape was sometimes augmented by the adoption of a breakfront — the result of inset drawers being placed on either side of protruding drawers — a feature that was particularly popular.
By the 1790s, the French commode generally had two or three short frieze drawers with long parallel drawers below them. Columns of term figures, headed by female masks in Classical or Egyptian garb, flanked the drawers. The columns were also often headed by engine-turned, plain, Tuscan, gilt-bronze capitals. Commodes with three
deep drawers on short feet turned like tops were also common.
In the 1770s and 80s, commodes with sumptuous ormolu mounts and pictorial marquetry were still made for royal households, but decoration became more sparing after 1790.
Mounts were rare and plain ring handles and escutcheons, inspired by simple Grecian design, were used. Transitional commodes used satinwood veneer or mahogany but, as designs became more refined, plain, well-figured wood such as mahogany, or fruitwood for provincial pieces, was used with marble tops. Decoration was provided by moulded wood, ebonized columns, and grisaille panels.
In Britain the side cabinet became plainer but was still of good quality. No particular shape was favoured, but some designers were influenced by Egyptian campaigns. Italian designers used walnut, olive, and tulipwood, combining a pictorial frieze drawer with two plain drawers. Geometric marquetry was used to emphasize the commode’s rectangular shape.
The rounded corners of the case Crossbanded veneers and light
are inlaid with three rectangular boxwood string inlays emphasize
panels corresponding to the the edges of the drawers. depths of the drawers.
Lion’s head brass pulls like these became popular towards the end of the 18th century.
hepplewhite COMMODE
This commode has three walnut-veneered drawers. Its skirt is slightly shaped and it has short, cabriole legs with carved toes.
ITALIAN COMMODE
This rectangular walnut commode has three drawers, the top one narrower than the two below. Its drawers have floral marquetry and a central oval inlaid with an architectural scene. Its handles are lion’s head masks with a circular pull held in each lion’s mouth. c.1780.
ENGLISH CHEST OF DRAWERS
This mahogany william and mary chest of drawers is serpentine in shape. It has a moulded edge, four graduated drawers, a moulded plinth, and the piece terminates in four ogee bracket feet. The top drawer of the chest is fitted as a dressing chest. c.1770.
GERMAN COMMODE
This rosewood commode’s rounded, breakfront shape is echoed in the conforming top, which slightly overhangs the case. It has three drawers of equal size with Rococo-style drawer pulls. Its base moulding is shaped and the case stands on small bracket feet. c.1770.
PARISIAN A LA GRECQUE COMMODE
This commode has three drawers, the upper one hidden by an applied ormolu entrelac frieze. Its two lower drawers are covered with a veneer pattern. The four cabriole legs end in feet ornamented with sabots. c.1775.
SWEDISH COMMODE
This breakfront commode, with three small drawers flanking three larger central drawers, is closely related to French styles. This one is slightly heavier, particularly in the canted corners and the marginally tapering legs.
PARISIAN MARBLE-TOPPED COMMODE
This rectangular commode has three drawers, and doors in the central section, flanked by a single door on each side. It has rounded pilasters on the sides that connect with its turned and tapering legs. It has circular escutcheons with swags, and circular pulls.
MILANESE VENEERED COMMODE
This kingwood-veneered commode has three long drawers, a straight apron, and square, almost bracket-shaped legs. Its light, distinctive colour is a result of the inner sapwood of the kingwood being used for the veneer. Its pulls are Neoclassical in design. c.1790.
ITALIAN COMMODE
This rectangular fruitwood commode has three drawers, the upper one narrower than the others, and stands on short, tapering feet. It has a floral inlay, and its central cartouche, outlined in a darker veneer, is inlaid with birds and flowers. c.1780.
SWEDISH COMMODE
This three-drawer commode has a marble top. Its case has canted corners, as do the feet, which taper slightly towards the base. Its side panels and drawers are veneered, and the central drawer has an inlay of musical instruments c.1790.
FRENCH COMMODE
This three-drawer walnut commode has a moulded top over three graduated panelled drawers and a shaped and moulded apron.
Short, scroll feet, each with a block terminus, support the case. It is decorated with pierced, foliate C-scroll escutcheons and handles. The style of this commode is provincial and rather old-fashioned. c.1765. W.139cm (54 ‘ 7). 4
FRENCH VENEERED COMMODE
This commode has a breakfront shape, created by three short drawers inset either side of three protruding long drawers. It has a moulded
white marble top and geometric parquetry veneer, which includes kingwood, tulipwood, and rosewood. The cabriole legs are squared and veneered, and terminate in gilt-metal sabots. c.1770.
FRENCH DEMI-LUNE COMMODE
This mahogany commode has a semicircular, or demi-lune shape. It contains three central drawers, and curved side doors, which open to
reveal shelves. It has a marble top, gilded bronze escutcheons that are Neoclassical in design, and pulls with swags surrounding them. c.1795.

SOME AUCTION ROOM PRICES

FURNITURE
Bookcases, Bureau-Bookcases and Bookshelves
Sheraton mahogany bureau-bookcase, swan-neck pediment, 3 ft
3 in wide 1,650 0
George II walnut bureau-bookcase 650 0
Georgian mahogany breakfront bookcase, 7 ft  10 in wide,
7 ft 8 in high 450 0
Regency rosewood cylindrical swivel bookcase with shallow
pierced gilt metal gallery, 25 in diameter, 38 in high 284 0
Large Regency mahogany bookcase with dentil cornice, the upper part enclosed by four glazed astragal doors; the cupboards in the base enclosed by four doors with indented panels 160 0
Edwardian mahogany bureau-bookcase inlaid with ribbon, shell and urn motifs in satinwood. The top with swan-neck pediment with double-glazed astragal doors. The fall flap opening to reveal drawers and recesses.

Four long drawers below on bracket feet, 7 ft 5 in high 132 0
Georgian mahogany secretaire-bookcase, fitted adjustable shelving enclosed by glazed barred doors and cupboard below drawer, 2 ft 6 in wide 120 0
Georgian figured mahogany inlaid secretaire-bookcase, the upper part fitted with adjustable shelving, enclosed by glazed barred doors and fitted with two short drawers enclosed by panelled doors below, 4 ft wide 100
Small oak bureau-bookcase, the top with glazed astragal doors, the base fitted with a single drawer and double panelled doors, 5 ft 7 in high 95 0
A nineteenth-century mahogany bureau-bookcase with satin-wood lines. Top having glazed doors. Fall flap to base, which has four long drawers and is supported on bracket feet 56 0
Bureaux and Writing Cabinets
Early nineteenth-century marquetry inlaid cylinder-front bureau with pierced ormolu gallery, mounts and beading, having interior fittings, writing slide and three drawers, on taper legs, 3 ft 2 in wide 475 0
George III mahogany secretaire cabinet, the upper lancet panelled glazed doors above secretaire and panelled cupboard doors, 8 ft 4 in high, 4 ft 2 in wide 250 0
George II walnut bureau inlaid with boxwood lines. Interior having central well, drawers and recesses. Two small and two long drawers in base, on bracket feet 210 0
Eighteenth-century fruitwood bureau with three long graduated
drawers below the fall, on bracket feet, 3 ft wide 140 0
Georgian mahogany secretaire cabinet, the top drawer opening to reveal eight drawers and recesses inlaid with shell motif and a green baize writing panel. Three long graduated drawers to the base. The upper part

enclosed by panelled doors 95 0
Georgian  mahogany fall-front bureau having four drawers
under and on bracket feet, 3 ft 2 in high 70 0
Edwardian mahogany bureau-cabinet with pierced swan-neck pediment over glazed doors, sloping fall front over four drawers, bracket feet 66 0
George II oak bureau with fall flap and small drawers, two small and two long drawers below and supported on bracket feet, 2 ft 10 in high 60 0
Victorian mahogany bureau with sloping fall front over four
long graduated drawers, on bracket feet 58 0
Cabinets
Georgian mahogany bookcase cabinet with arched pediment surmounting astragal double doors. The base with double doors supported on bracket feet, 6 ft 6 in high 470 0
French display cabinet of Louis XVI design, mounted with ormolu female caryatids, the base with panels in the style of Vernis Martin, 3 ft 9 in wide 410 0
Regency mahogany display cabinet, the upper part enclosed by brass grilled and latticed doors, panelled cupboards to the base and supported on bold paw feet 290 0
Victorian walnut display cabinet in the Louis XVI manner, mounted with ormolu and inset with Sevres porcelain panels, two serpentine glass doors to the side and a door to the centre, 5 ft 1 in wide 126 0
Mahogany display cabinet of Chippendale-style with two glazed astragal doors below a swan-neck pediment and supported on cabriole legs and claw and ball feet, 5 ft 3 in wide 80 0
Canterburys
George III mahogany Canterbury with drawer in frieze on
tapering legs, 1 ft 7 in wide 130 0
George III mahogany Canterbury with turned legs 115 0
Georgian mahogany four-section music Canterbury with drawer
in base 85 0
George III mahogany Canterbury with slatted sides and ringed
legs, 1 ft 4 in wide 60 0
Chairs—Open Arm and Elbow
George II mahogany open arm chair in the French manner. Rectangular back and serpentine fronted seat. Arm supports and cabriole legs carved with rococo foliage and with scroll feet 150 0
George III mahogany open arm chair forming library steps,
the arm supports and curved stretchers with rope twist 150 0
Two early stick-back Windsor elbow chairs
Edwardian inlaid rosewood open arm chair with pierced splats
Chair—Dining Sets
Ten Sheraton-period mahogany dining chairs with cross rail backs and satinwood crestings on turned and reeded legs. Two carvers
Eleven Regency rosewood dining chairs with carved and reeded back rails, caned seats and on reeded sabre legs
Set of eight Regency mahogany dining chairs with padded backs, sabre legs. All are strung with brass, with brass carrying handles on the cresting rails
Set of two carving and six single Hepplewhite mahogany chairs with shield backs and pierced vase splats carved with wheat ears, on tapering legs
Set of six single and one carving Hepplewhite mahogany chairs with shield backs and pierced vase splats, supported on tapering legs
A composite set of eight eighteenth-century Dutch walnut dining chairs, inlaid with marquetry depicting floral bouquets, urns, scrolls and birds. Comprising one carving and seven single chairs
Set of six Sheraton inlaid mahogany single chairs with triple splat backs and stuff-over seats, on tapering legs
Set of nine mahogany dining chairs, one carver, in the Hepplewhite style with triple vase splats and drop-in seats
Set of two carving and six single Chippendale style mahogany ladder-back dining chairs with pierced serpentine splats and moulded legs
Set of six Regency mahogany reeded frame single chairs on sabre legs
Set of six William IV single dining chairs with leather seats and sabre legs
Set of two carving and four single Chippendale style mahogany chairs with carved and pierced splats and loose stuffed leather seats, supported on cabriole legs and claw and ball feet
Set of six Victorian walnut single chairs on slender curving legs
Set of six small Victorian walnutwood single chairs with oval backs and pierced scroll splats, on curved legs
Set of four Georgian reeded mahogany wooden seat hall chairs, crested
Set of six elm rush seat chairs with spindle backs Set of six Victorian single chairs with slender curving legs and damask seats
Set of four Edwardian mahogany shield-back single chairs inlaid
with satinwood lines and a fan Set of six Victorian mahogany balloon-back dining chairs on
turned legs
Chairs—Dining Single
Pair of George III mahogany dining chairs with moulded and rounded arched backs and pierced splats carved with foliage
and husk pendants. Upholstered curved seats on square legs
with block toes 50 0
Sheraton mahogany chair with stuff-over seat 17 0
Three early Victorian yew wood standard chairs 17 0
Pair of Victorian rosewood chairs on turned carved legs 5 0
Regency mahogany standard chair on reeded sabre legs 5 0
Chairs—Easy
George III mahogany wing armchair with an arched back,
shaped sides and chamfered legs 140 0
Early Victorian mahogany frame wing easy chair 50 0
Papier m&chi nursing chair with cane scat and inlaid with
mother-of-pearl 30 0
Victorian button-back nursing chair 29 0
Chests of Drawers and Commodes
Chippendale mahogany serpentine chest with reeded and canted corners and with four graduated drawers, on wide bracket feet, 3 ft wide 980 0
Chippendale mahogany serpentine chest, the canted corners pendant with clusters of fruit and flowers in bold relief, 3 ft 3 in wide, 2 ft 8 in high 620 0
Georgian walnut bachelor’s chest with folding top and four long drawers having brass handles and lockplates; supported on bracket feet, 29 in wide, 13 in deep, 32 in high 165 0
Eighteenth-century walnut chest of three short and three long drawers with tulip wood stringing on stand fitted with two short and one long drawer with cabriole legs and claw and ball feet, 3 ft wide 105 0
Small Georgian mahogany commode with fluted and canted
corners and fitted with two small and three long drawers 66 0
George III mahogany chest of two short and three long drawers,
3 ft 2 in wide 28 0
Chiffoniers
Regency mahogany chiffonier with three stepped shelves above with gilt metal sides pierced in the Chinese style, the fronts with rope twist mouldings. The lower section enclosed by two doors panelled with radiating

pink silk, 3 ft 10 in wide        150 0
Regency rosewood chiffonier, the single shelf at the top with acanthus supports. The single drawer to the front containing writing panel and fitted compartments. The whole with double brass rail and flanked by scrolled

acanthus supports        110 0
Coffers and Chests
Early Charles II oak chest of four panelled drawers with
panelled sides and bun feet, 3 ft 1 in wide 65 0
Late seventeenth-century carved oak coffer with a domed lid. The front carved with four arches and surrounded by stylised carving of leaves, strapwork and birds’ heads, 3 ft high, 5 ft 3 in wide 60 0
Early seventeenth-century carved oak dower chest, 3 ft 6 in wide
Seventeenth-century oak coffer with lifting top, the front panelled and carved in low relief with strapwork and foliage and the initials ‘HP,’ 4 ft 2 in wide
Cu pboards—Corner
Hepplewhite free-standing, serpentine-fronted mahogany corner cupboaid. Double glazed doors at the top enclose three display shelves. Base on square feet with double doors
Mahogany bow-fronted corner cupboard with glazed door enclosing shelves
Georgian standing corner cupboard with four panel doors enclosing shelves
George I blue japanned hanging corner cupboard with small open shelves above a pair of bowed doors. Decorated with chinoiseries, 3 ft 9 in high by 1 ft 11 in wide
Lacquer bow-fronted corner cupboard decorated in gilt with Chinese figures and buildings on a scarlet ground. The whole on cabriole-legged stand {not matching), 1 ft 10 in wide
Bow-fronted hanging corner cupboard with the door painted with King Solomon and the Queen of Sheba, 1 ft 11 in wide
Black lacquer bow-fronted corner cupboard with doors decorated with gilt Chinese landscapes, 1 ft 10 in wide
Davenports and Desks
Eighteenth-century partner’s desk in sabicu with tooled green leather top and fitted with eighteen drawers to the kneehole frieze, with rococo gilt metal handles; circa 1780
Queen Anne walnut kneehole desk crossbanded with fruitwood, with one long drawer and two tiers of three small drawers, 2 ft 5 in wide
George III mahogany tambour desk, the shutter enclosing fitted interior with leather-lined slope, pigeon-holes and drawers with two drawers below on square tapering legs with brass castors, 3 ft 1 in wide
Mahogany pedestal desk with leather-lined top and nine drawers around kneehole, 4 ft 8 in wide
Georgian mahogany Davenport with drawers and slide and with leather-lined fall and brass gallery, 1 ft 8 in
Victorian figured walnut Davenport with carved front supports
Dressers
Eighteenth-century oak dresser with three small drawers with brass handles and lockplates and cabriole legs ending in pad feet, 6 ft 2 in wide
Eighteenth-century oak dresser with three small drawers with brass handles over a waved apron, with cabriole legs on pad feet, 6 ft 2 in wide
Stuart-design oak dresser, the cupboards and drawers with geometrical raised panels with gilt metal drop handles
Oak dresser, the top with a shaped frieze, two cupboard doors
and three ihelvet over three moulded drawers to the base,
with cabriole legs, 5 ft 6 in wide, 6 ft 8 in high 105 0

METHODS OF DRAWER CONSTRUCTION
the door-opening. Fit the fillets carefully and glue and pin the front ones in position, making the neat mitre joints at the corners, as in Figs. 9 (d)
and (g). Fit the panel and fix it in place by means of further fillets pinned on the inside of the frame at the back, as also shown in Fig. 9 (g.)
DRAWERS FOR KITCHEN FITMENTS
Success in drawer-making depends primarily upon the accuracy of the drawer-opening in the carcase. If this is at fault, the drawer, however well made, will be difficult to fit and will not run smoothly. Check the opening to see that it is straight and square. If necessary, slight adjustments can be made with it bull-nose plane, or perhaps by moving the runners or kickers.
Dovetailed Drawer. Undoubtedly the best type of drawer is that shown in the first illustration of Fig. 1. It is the standard form used in all well-made furniture. The cut-away portions shown in Fig. 2 (a) give details of construction, but the reader is advised to make a careful
examination of a drawer from an existing piece of furniture. The sides are lap-dovetailed to the front and through-dovetailed to the back. The front is grooved to take the bottom, which is held in place at the sides by means of drawer slips, which also are grooved. The lower edge of the back is made level with the top of the groove, and the bottom can thus be pushed into the groove from the back, and is held in place by screws inserted from underneath into the back. The top edge of the back is
FIG. 1. 1 inished appearance of(above)
a dovetailed drawer► and (top right) a
rehmed th-awer; (bottom right) a
much simpler form of construction
suitable for small drawers.
made about I in. lower than the sides, so that there is no danger of its rubbing on the kickers.
Drawer fronts rarely need be thicker than I in., with sides and back of A in.; for small drawers these dimensions should be reduced.
Plane up the wood, making quite certain that the inside faces are quite flat and out of winding; lay them out in their relative positions as in Fig. 2 (b), and mark the inside bottom corners so that it is known where each piece will be finally fitted.
Commence by making the bottom edge of the drawer front quite true, and fit the bottom corner, X, as in Fig. 2 (c), by planing the end and testing it in the carcase. When this end is correct mark off the exact
length of the drawer front and fit the other bottom corner, Y, in the same way.
Plane the top edge of the drawer so that it will just fit the opening. The drawer front, when fitted, should only just enter the opening for about I in., as shown in Fig. 2 (d), the edges being very slightly tapered to allow this. Next saw and plane the back to length, so that it can be pushed into the opening to make a good, close fit. Plane the sides to ensure a tight fit when the drawer is pushed right back into the opening. Then saw and plane off the ends square to final length, allowing for at least 4-in. clearance at the back of the drawer inside the carcase.
Fig. 2 (e) gives details of the next stage of marking out. Using a gauge (preferably a cutting gauge, but a well-sharpened marking gauge will serve), set it to the distance D, which is the length of the lap of the dovetails. With this setting, gauge thetwo sides and both ends of the drawer front, as in Fig. 2 (e). Re-set the gauge to a shaving less than the thickhess of the drawer sides; gauge a line on the inside of the drawer front from each end, and also two corresponding lines oil the back, shown at S in Fig. 2 (e). Re-set the gauge to the thickness of the back, and gauge a line on the back end of both sides, as at B. Set the gauge to the distance of the top of the groove oil the front from the bottom edge, and gauge a line at the ends of the sides, as at G in Fig. 2 (e); this gives the final position of the lower edge of the back.
Mark out the dovetails on the ends of the side pieces and cut away the waste; the groove in the bottom must be covered by the bottom tail, for otherwise a gap would show at the ends of the drawer front. Cut the tails on the back end. Scribe the pins from the tails, and cut and fit the joints. Plough the groove on the front, allowing at least I in. below the bottom of the groove. Glue the joints and assemble the drawer; make sure that the joints are close, either by cramping or by tapping them together with a hammer, protecting the work from damage by means of a block of waste wood. Test the drawer to see that it is exactly square and out of winding; this is essential if the drawer is to fit the carcase properly. Allow the glue to set, and then clean up the drawer, planing down the sides until the drawer will slide in
FIG. 3. Stages in the preparation and
fitting of slips; (d) shows a stopfitled
to the bottom drawer rail.
smoothly ; finally plane the front to allow it to enter the drawer opening.
Beware of planing the drawer without first being quite certain where it is tight ; tight spots frequently show up as shiny areas where the sides rub on the carcase, and these parts should be lightly planed. When the drawer fits the opening it is ready to receive the drawer slips; these are made, as Fig. 3 (a), by first ploughing the edge of a suitably sized piece of wood, gauging the thickness of the slip and rounding off the top edge, as indicated by the broken line, and then sawing off the required strip. Clean off the sawn surface with the plane. The thickness of the slip should be about equal to the thickness of’ the drawer side, so that the area of the running surface of the sides is approximately doubled when the slips are in place. On the front end of the slip cut a tongue equal to the size of the groove, as in This enables the slip to be located exactly in the groove on the front. At the back end of the slip the top rounded portion is removed, as at B in Fig. 3 (c), so that the top of the groove on the slip will be level with the underside of the back. Glue the slips in place and allow the glue to set.
Fit the bottom into the groove; if solid wood is being used the grain should be parallel with the front of Principal details of construction of a typical rebated drawer.
the drawer, as in Fig. 2 (a). Slots to fit the shank of the screws are cut in the bottom at the back edge to allow for shrinkage, and the bottom is screwed from underneath to the lower edge of the back of the drawer. To allow for possible shrinkage in a solid piece the drawer bottom must project beyond the back of the drawer; if plywood is being used for the bottom no allowance for shrinkage need be made.
A drawer stop should be fitted to the bottom drawer rail to prevent the drawer from running in too far; Fig. 3 (d) shows these details. In order that the front face of the drawer, when closed, may be level with the
framework, the stop must be sit back from the front edge of the rail distance equal to the thickness of t drawer front. Set a gauge to th s thickness and gauge a line on
rail. Two stops should gene ally be used; these are small blocks of wood slightly thinner than t e space below the drawer bottom Glue and pin these stops in position exactly level with the gauge mark on the rail.
Rebated Drawer. A simpler type of drawer, which can be used for small articles, is shown in Fig. 1. It is not 4s strong as the dovetailed drawer, but is easier to make, the sides beings t into a rebate on the front, and glucd and nailed in place, and the back housed into grooves in the sides. The bottom is fixed as for the dovetailed drawer by means of drawer slips; if preferred, a slip could be used oil the front as well, instead of the groove shown.
Fit the front and sides to the c r-case as described for the dovetail d drawer ; the essentials for obtairim a well-flitting drawer are the same in each case. Set the gauge to a distance which is just a shaving less than tlile thickness of the sides, and gauge tie inside of the drawer front as at S in Fig. 4.
Next gauge the amount of lap for the side, as at L in Fig. 4. Saw down the shoulder-line of the rebate, and saw or chisel out the waste down to the gauge line. Place the two sides together and square off the position of the groove for the housing of
back, the distance apart of the t~o lines being exactly equal to the thiqkncss of the back, as at A in Fig. Square these lines across on to I inside of the sides, and saw a chisel the grooves, the depth of which is fixed by a gauge line.
Saw the back of the drawer to its exact length, remembering that it is shorter than the front by twice the distance X in Fig. 4. The depth of the back must be less than that of the sides, and its bottom edge should be level with the top of the groove on the front of the drawer. Glue and nail the sides to the front and back, and be certain to punch the heads of the nails just below the surface, so avoiding damage to the plane when cleaning up the drawer. Test the drawer for squareness and allow the glue to set. Plane Lip the sides so that the drawer fits the carcase, and fit the slips and bottom, as described for the dovetailed drawer.
For a sticking drawer, candle-grease, soap or talcum powder is an excellent lubricant ; waxes such as beeswax have a tendency to be rather too tacky.
Simple Drawer. A simple construction, which could be used for very small drawers is the third example illustrated in Fig. 1. The bottom is rebated into the front and sides
FIG. 5. Drawer of simple glued-andnailed construction. Parts are cut away in the drawing to show details.
Fi(;. 6. Drawer with a groove formed in the side (a); how a drawer may he .fitted under a flat top (b and c).
(Fig. 5), and is nailed or screwed in place. The sides are fitted as for the rebated drawer, the back being the same length as the distance between the shoulders of the rebate on the front. Rebate the front and sides, and k1lue and nail the drawer; test for squareness, and clean up when glue is set. Fit and fix the bottom.
Drawer with Grooved Sides. It is sometimes desired to fit a drawer between two flat vertical members which have no horizontal members to support the runners. This can be achieved as indicated in Fig. 6 (a). A groove is made in each side of the drawer only, the front remaining Untouched. A thin fillet which slides comfortably into the groove is screwed to each side of the carcase, to support the drawer. The front of the drawer at the end of the groove acts as a stop for the drawer.
Drawer Under a Flat Top. When a drawer is required under a flat top, such as the top of a workbench, it can be fitted as shown in Fig. 6 (b). A rebated block is screwed to the bench, and a fillet, which fits the
groove thus formed, is screwed to each of the drawer sides. An alterna.. tive to the rebated block can be built up from two pieces, as shown in Fig. 6 (c), and is just as efficient. A block screwed to the bench at the back of the drawer will effectively prevent it from going too far into the opening.
CUPBOARDS
Small Cupboard. A simple cupboard built up of framed panels fastened together is shown in Fig. 1. The dimensions given in Fig. 2 (a) are for a cupboard 2 ft. high by 16 in. wide and 12 in. deep, but these proportions can be modified to suit the purpose of the article.
The front frame is jointed together by haunched mortise-and-tenon joints, while the rest of the frames and also the door have similar joints, with the addition of the groove for
FIG. 1. Small cupboard made up of framed panels and a boarded top.
the panel (which has to be allowed for in cutting the joints). Details of the grooved joint are shown in Fig. 2 (b); the variations in the dimensions of the different parts to suit the differing widths of the bottom rails of the carcase and door are indicated in Figs. 2 (d) and (c).
After planing the wood to size, all parts that are to be of the same length should be marked out together. Since all eight of the vertical members, or stiles, of the carcase have to be identical, they should be cramped together and the position of the Joints and the final lengths squared across all eight pieces together. Similarly the two front rails and the two back rails can be marked together, and then all four side rails.
Set the mortise gauge to the .’-in. mortise chisel, and gauge all the mortises and tenons at the same time, after first squaring around all the necessary shoulder-lines. Cut all the mortises, and then saw down the cheeks of all the tenons. Next set the plough so that the width of the groove made is equal to the thickness of the material for the panel ; plywood is very suitable, but solid wood may be used if preferred.
Set the stop of the plough to make the groove about J in. deep, and uggested dimensions for the cupboard (a) and details of the grooved
.joints (b). At (c) is shown a plate used for securing the top, and at (d) and (e)
dimensions for the bottom rails ol’the side frame and of the door.
plough the groove on all pieces of the framework, making certain that the work is done from the face side of the wood in every case. Saw off the shoulders of the tenons, and cut the haunches to fit, easing off the plough groove at the ends of the stiles so that the haunch on the tenon will fit the groove at the end. Cramp up each frame to see that the joints fit properly, and carefully measure the size of the frame on the inside to obtain the dimensions of the panel, remembering to add the depth of the groove at both sides, since the panel is to fit into them.
Cut the panel to size, test it in place in the frame, and cramp up. If the joints are forced apart when the pressure of the cramps is slightly eased, then the panel is probably a little too large; this must be adjusted, otherwise the panel will force the joint apart after it is glued up. If the
panel is of solid wood, the width must be ~ in. less to allow for normal expansion in damp weather. Without this allowance expansion would tend to push the joint open, or to cause buckling of the panel.
When satisfied that the frame and panel are correct, glue the joints and assemble, placing a spot of glue on the centre of the edge of the panel as shown at A and B in Fig. 3. This fixes the position of the panel and stops it moving in the frame. Cramp up the frame, test for squareness, see that it is not in winding, and allow the glue to set before cleaning up the frame. It must be remembered that the front frame differs from the others in that it is not grooved on the inside.
When all four frames are prepared, screw or nail the front and back frames on to the two end frames, as shown in Fig. 2 (a), and the main carcase will be complete. Measure Sectional riew showing how the shelf and bottom are fitted.
the size of the door-opening in the front frame, and make the door in exactly the same manner as the other sections. The door is made a fraction
-full” in size as a provision for slight planing down when completed, in order to obtain an exact fit. Hinge the door in place with a pair of 2-in. brass butt hinges. The ends of the hinges are usually placed level with the inside edges of the top and bottom rails, as in Fig. 2 (a).
Fig. 3 gives a sectional view of the cupboard, showing the method of fitting the shelf and bottom. The shelf is held in position by means of fillets screwed to the stiles at each side, and the bottom is secured by fillets screwed all round on the inside of the
base. The front edge of the bottoii acts as a stop for the door.
The top is of solid wood, overlapping the carcase by I in., and he~d in place by small metal plates which allow for the expansion or contra
Q-
of the wood. Details of thefe- plates are given in Fig. 2 (c). If a pliwood top is preferred, it should tie made slightly smaller than the top 6f the carcase, and secured with pan~l pins. A wooden handle is shown in the assembly illustration, and is screwed oil from the inside, but any oth r formof suitable fastening may e used.
Store Cupboard. A good-sized cup board is needed in most homes,
one illustrated in Fig. 4 could be used in the kitchen, as a store cud_ board or as a toy cupboard. The legs are out of I ‘-in. stall’ and the rails are all tenoned into them.
A convenient height is betwee 2 ft. 6 in. and 3 ft. The other dimersions are shown in Fig. 5, where the details on the right illustrate one cf the back legs as seen from the inside. The top rails have haunched tenon $, and all side rails are grooved to take the plywood panels for the sides, the mortises being cut to allow for the reduction of the tenons by the groov
FIG. 4. For a larg,
cupboard than th,t
illustrated in Fig. 1, th,
two-door design show
here is suitable. Le.,
raise the carcase cle,
of the floor.
CONSTRUCTION OF
A STORE CUPBOARD
Note that the back rails are set in from the back face a distance equal to the thickness of the plywood
panel, probably 2. or 3 in., and the
back legs are rebated to the same depth and i in. wide, so that the back can be screwed to the legs as well as to the top and bottom rails.
on them. Cut the mortises and saw down the cheeks of all tenons.
Next plough the required grooves; then saw off the shoulders of the tenons and fit all the joints carefully. Cramp up the ends dry, to make sure that the frame goes together correctly, and then fit the panels. Cramp
I ~6 In. SQUARE
FIG. 5. Principal dimensions of the cupboard illustrated in Fig. 4, together
with details of the jointing of the rails into the left-hand back leg.
‘File legs are grooved to take the side panels only, as seen in Fig. 5.
The front rails are fitted flush with the front surface of the legs, as in the detail drawings Figs. 6 (a) and (b), the ends of the tenons being mitred where they meet inside the leg.
Commence the construction by cramping all four legs together; mark out across them the final lengths and the positions of all mortises. Repeat the procedure with all rails that have to be the same length, and square across the shoulder-lines
up the front and back dry, in the same way. When satisfied that all joints are correct, rebate the back legs for the back panel. Glue up and cramp the two sides first, test for squareness and flatness, and allow the glue to set.
Clean up the ends, taking particular care to remove any excess glue that may be in the mortises. Again cramp up dry to test the final fitting; if satisfactory, dismantle for gluing and then cramp up the whole structure. Clean up when the glue is set, and fit and screw on the back panel to the rebates on the back leg, and to the top and bottom rails.
The bottom is fitted in exactly the same manner as described for the small cupboard on page 226, by screwing fillets to the bottom rails so that the bottom is supported all round. One or more shelves may be
fitted as for .the previous cupboar and supported by light batters screwed to the legs on the inside.
The doors are as described for t e door of the cupboard on page 22 ; a slight fullness in size is allowed f r a little planing down to an exact M. If the meeting stiles of the door a e left butted together as in Fig. 6 (f ?I no complications arise, but if te doors are to overlap with a rebate, is shown in Fig. 6 (c), the inside stile of the left-hand door must be made I in. wider, as indicated, to allow for the overlap, so that the two stiles appear to be the same width from the front.
A lock may be fitted to the cupboard if desired, together with x ready-made knob or wooden handle, as for the previous cupboard.
The top overlaps as shown in Fig,, 5 and 6 (e); it is held in positio by means of metal plates as suggested for the preceding cupboard.
If a larger cupboard is required th~ panels will need one or more cross rails, according to height, as indcated by the broken line in the end view of Fig. 5 (a). The doors also will need a similar rail. These rails are mortised into the vertical me
bers and have grooves on their to) and bottom edges to take the pane~ The mortise is therefore equal to th width of the rail, minus twice tht depth of the groove (Fig. 6d).
Jointing of rails and legs (a and b), and a cross rail necessary in large frames (d); the other sketches give details of the doors, (c) and (f) being allernaHres,for the meeting stiles.

Dressing Tables, Mirrors and Washstands
Restoration appearance of the dressing table—lowboys and kneehole dressing tables—tables with fitted interiors—Vauxhall glass and Restoration wall mirrors—development of table mirrors with desk bases-18th-century wall mirrors—the mirror with candle sockets and arms—lightly made washstands of the 18th century.
Small side tables were used as dressing tables prior to the Restoration but were not constructed specifically for this purpose. Even during the latter half of the 17th century small occasional tables with a shallow drawer under the top were used in bedrooms and dressing rooms for holding toilet preparations and hand mirrors. Standing table mirrors had not yet been introduced and rectangular wall mirrors with wide convex frames were hung upon the wall above the tables used for dressing.
It was not until the reign of William and Mary that
dressing tables, which were designed for the purpose,
appeared on the scene. This type of table is sometimes
referred to as a writing table and in America is known as a
lowboy. It was constructed with two small drawers above a
single, long drawer and usually stood on four cabriole
legs. Like most of the furniture of the period it was made
in veneered, burr walnut. Some versions had a single,
shallow drawer situated under the table top with deeper
and narrower drawers at either side. Another class of
dressing table which was made about the same time was
the knee-hole pattern. This consisted of two nests of small
drawers on either side of a recessed cupboard. Any doubt
as to whether this piece of furniture might have been designed as a knee-hole desk may be dispelled wherever a pull-out brushing or dressing slide is found immediately under the top.
During the first quarter of the 18th century a further development occurred when the dressing table top was made to open like a chest lid. On the underside a framed rectangular mirror was fitted and the space immediately beneath was divided by partitions into numerous receptacles and boxes for holding cosmetics, pins and all the paraphernalia of the toilet set. The dressing table with the lift-up top and fitted interior continued to be made during the greater part of the long Georgian period, often without any drawers at all. On the other hand, there was a vogue for small chests of drawers, where the top drawer contained a mirror and fitted interior, which would also serve as dressing tables.
In an earlier chapter, mention was made of certain ingenious designs for small articles of furniture which were intended for some particular purpose and among these may be included the poudreuse. This was a small dressing table in which a central section of the top opened back to reveal a toilet mirror. On either side of this were two circular lids, let into the table top, which gave access to the powder containers beneath. This was for use in a time when both men and women wore elaborately dressed wigs which were always kept profusely powdered.
Before giving a more detailed description of the types of mirror used during the 17th and 18th centuries, a note on the development of mirror glass production in the British Isles during this time might prove helpful. The manufacture of clear plate glass for mirrors, except in rather small sizes, was not possible before the Restoration. The Duke of Buckingham sponsored the opening of a glassworks at Vauxhall in London about 1665, and a process for making larger sheets of glass was developed here. Because of the method of silvering then in use the makers were unable to produce mirrors of more than 4 feet in length. The thickness of the glass was appreciably less than that of later mirrors and one of the most important characteristics of these early examples was the very slight bevel which was ground on the edges. The steeper and sharper bevel belongs to those mirrors produced during the 19th century or later. Vauxhall glass continued to be made until nearly the end of the Georgian period and mirrors were also manufactured at certain other glasshouses, such as the one at Southwark.
As already mentioned, Restoration mirrors were surrounded with wide, convex framing which is sometimes referred to as bolection moulding. The frame was usually veneered with burr walnut, oystershell or flower marquetry. It was not until the later William and Mary period that swing-mirrors mounted on a stand were introduced. These were rectangular in shape with slightly incurving upper corners. They were pivoted on two straight uprights which fitted into a base containing a till of small drawers. A number of these early mirror bases were quite deep and sometimes had the appearance of miniature bureaux.
Later in the 18th century, bases became somewhat more shallow and had flat tops with serpentine or bow fronts which matched the dressing tables or chests of drawers upon which they were designed to stand. The uprights from which the mirror was suspended were also shaped and the mirrors were set in an oval framing or in one of shield or similar form. Towards the end of the century many small standing mirrors were made which had feet but no bases with drawers.
As the 18th century progressed new methods of silvering enabled larger mirrors to be made and these were usually framed in the architectural tradition with a frieze, cornice and pediment above. Those which were made to hang between the long sash windows of the Georgian withdrawing rooms were known as pier glasses. A small side table of similar design was often placed below the mirror or a console table with one elaborate supporting leg in the centre.
Convex mirrors were in favour after the introduction of sideboards in the time of Adam and Hepplewhite. It is said that they were designed to be hung above the sideboard so that the butler, without embarrassing the diners by too obviously overlooking, could watch the progress of the meal reflected in the mirror and could more unobtrusively direct his waiting servants in their duties. These convex mirrors with an ebony bezel and deep cavetto frames, decorated with a series of small gilded balls, date from those years around the late 18th and early 19th centuries.
The overmantel mirror was another pattern which was becoming more popular during the later Georgian period. It was introduced about 1745 at a time when fireplaces were beginning to be made smaller. This type of mirror was very often designed with three glass panels, one larger central mirror being flanked by two smaller ones. They were frequently produced with architectural embellishments in the Adam style and the frieze above the glass carried a conventional design of husks in swags, ribbons and medallions or a low-relief group of classical figures. As the 19th century progressed the overmantel mirror was made in one large sheet of glass which steadily increased in size until it almost filled the entire wall space over the mantelpiece.
Because it was realised that a good reflecting surface would increase the volume of light, many 18th century wall mirrors were equipped with branches and candle sockets. Small mirrors in plain frames with a single candle branch were known as sconces while those in elaborately carved and gilded settings of rococo design were called girandoles after the French originals. Girandoles were usually of asymmetrical shape but were made in pairs to produce a symmetrical or balanced effect.
Personal cleanliness was not the sort of thing that people of the 17th and 18th centuries worried much about. When the Romans occupied these islands 1500 years earlier, the civilised Britons lived in villas which were well equipped with hot baths and other hygienic amenities. These disappeared after the end of the Roman occupation and were not revived until the reign of Queen Victoria was more than half over.
In Chippendale’s time a superficial rinsing of hands and face was all that was considered necessary in the way of daily ablutions. Consequently, mid-Georgian washstands were very lightly made. There were two main types, the first of which was rectangular in shape with a double lid on the top. The water jug and basin were kept in a small cupboard beneath and when required were lifted out and placed in a circular recess in the top, after the lids had been opened.
The second type was even more lightly made and con-
sisted of a rectangular or triangular stand, on the top of
which the ewer and basin were placed permanently, but a
shelf was provided half-way down on which to stand the
jug while the basin was being used. The triangular wash-
stand was designed to fit into a corner and was probably
intended for the smaller bedrooms where space might
be at a premium. These stands are often employed nowa-
days as bedside tables, to take a reading lamp and a book.
Unfortunately, the original top with the basin hole in it is
sometimes replaced. While it is necessary to carry out
some modification if the stand is to be used as a table, it
is always preferable to leave an antique piece of furniture
in its original state. Here the problem may be solved by overlaying a new top on the original one. A third, but much less common type of small wash-basin stand is dealt with in the following chapter.
The introduction of larger jugs and basins made of the new ironstone china in the early 19th century and the growing demand for better washing facilities produced a larger and more strongly made washstand. This was about 3 feet in length with high sides and back to prevent water being splashed around. The top was plain, without a recess for the basin, and there were two drawers underneath with a shelf nearer the floor. These Regency washstands were usually made in mahogany with turned legs. They make very good writing tables as modern bedrooms with running water or an adjacent bathroom render their original purpose obsolete.

Stools, Chairs and Settees
Early forms of stools—development of the chair—scarcity of chairs before the 17th century—etiquette of the joined stool—upholstered farthingale chairs—”monk seats” and Commonwealth chairs—Restoration chair design—characteristics of William and Mary chairs—Queen Anne cabriole legs and the fiddle splat—wing chairs—Chippendale chair designs—chair backs of Hepplewhite—Adam’s classical shapes—Sheraton elegance—Regency and early Victorian chairs—the mystery of the Windsor chair—harlequin sets—the emergence of the settle—love seats and the development of the settee two tiered tables .
On a marble panel in Athens which dates from around 400 B serving tray antique tea table for sale .c antique butler type ashtrays . a woman is to be seen seated on a chair which has all the characteristics of a British chair of the Regency period antiquing furniture . The designers of Regency furniture, like Thomas Hope and Henry Moses, went to the ancient civilisations for their inspiration and this chair in the Athenian sculpture is an interesting case of “it has all happened before” 6 legged table antique .
After the disorders of the Dark Ages when so much of art and craftsmanship was lost, the way of making beautiful and serviceable things had to be rediscovered or reinvented antique regency revival sideboard . At the beginning of the early Tudor period it can be said that in any house, even of the greatest importance, most people had to be content to sit on stools blacks, meissen, porcelain . Sometimes these were of the planked type as illustrated in Chapter 1, but more often they were made of turned wood with triangular shaped seats women brass lamps . This type of stool was common throughout northern Europe and when they are encountered it is difficult to say what may have been their country of origin painted romer glass .
Small chests were also used as seats in early times and formed one of the sources from which the chair developed, the other being the triangular-seated stool japanese black lacquer round tea table . In both these instances the need to provide additional support for the body brought about the addition of backs and arms to the stools antique french office chair . The first box or chest chairs were very heavy and cumbersome and it became evident that there was little advantage in constructing chairs in this way antique half circle dropleaf table . For a short while this type of chair was made without the lower side and back panels but with the front panel still included staffordshire figure lovers couple . By the middle of the 16th century the oak armchair, without any lower panels in the framework, was to be found in most houses of the reasonably well-to-do antique porcelain +swan +painted .
A custom, lasting for many years, delayed the employment of the chair for general use black stinkwood table sale . During the second half of the 16th and for the greater part of the 17th century it was commonly accepted that only the head of the family or the master of the house should occupy a chair 2 tier adams style table lid . In some homes a thoughtful husband might provide a chair for his wife but as for the rest of the household, they had to use stools or remain standing wiener werkstatte chair . The modern word chairman, to denote the head of a committee, is probably derived from this ancient practice earthenware mixing bowls antique with handles . On a point of etiquette, observed in Britain during the 17th century, a host and his wife would vacate their chairs when entertaining an important guest and would sit on joined stools, as a mark of deference, while the guest occupied a chair american spoonback armchair .
The heavy oak arm-chair of the late Elizabethan and the early Stuart periods was of very much the same pattern with turned legs and a carved or inlaid panel in the chair-back candlestick 17th century church . The only marked difference in construction was in the top rail of the back antique display cabinet half round . While the Elizabethan chair had the top rail jointed between the uprights, the Stuart version had the uprights jointed into the top rail which projected at the sides and was supported by “ears” or small brackets 18th century card table .
The joined stool must have been made in considerable numbers during the 17th century as it was frequently referred to in bequests and inventories empire pier table . Nowadays, it is sometimes called a coffin stool which is rather a misnomer breakfast serving tables . It is true that in many old churches joined stools are to be found carrying piles of hymn books or collecting boxes and occasionally they may have been used for supporting a coffin during a burial service, but they were certainly not designed for that purpose european porcelain marks 1742 . A joined stool was the average person’s seat in the 17th-century household, either at the dining table or around the fire kidney shaped tables antique . It is likely that those found in old churches today were banished there from the vicarage when custom and funds permitted the parson to provide himself with the more comfortable chairs botanical antique ceramics collectors .
While chairs with wooden seats were in use throughout the 17th century and also during the 18th in the houses of country-folk, upholstereed chairs did appear in the early Stuart period antique extend side table . These, like the farthingale chairs, have already been mentioned in a previous chapter but during the Commonwealth somewhat heavy oak dining chairs were taken into use about the same time as the gate-leg table appeared thomas sheraton games table . These were similar to the farthingale chairs but had lower seats and higher backs which were upholstered in thick leather and edged with large brass round-headed nails antique empire pier table .
An interesting, dual-purpose piece of furniture was developed about this time satsuma pottery thousand flower . Known as a table-chair, it was constructed so that when the table-top was tilted to a vertical position it formed the back of a chair kidney shape dressing table . It is sometimes referred to as a monk’s seat, but the Dissolution of the Monasteries and the consequent banishment of the monks from the British way of life had occurred over a hundred years before the table-chair was invented 19th century tables .
The chief characteristic of Restoration chair design was the spiral twist for legs and backs english refectory table . A favourite motif of the wood-carver for chair decoration was the device of two cherubs, or amorini, supporting a royal crown c 1840 antique pedestal card table . This was inspired by the return of the monarchy after the Commonwealth and remained in popular favour until the close of the century antique secretaire . Chairs of the better quality were usually made in walnut but in the provinces many dining chairs were produced in oak 18th century chamber pots . Two varieties of these are usually referred to as Yorkshire and Lancashire chairs antique chair tall skinny back . They were quite heavily made and the former had two shaped and rounded back-rails, decorated with carving and bearing a small bearded mask century hepplewhite walnut card table . Traditionally, this was said to represent the death mask of the martyred Charles I and earned for this Yorkshire type the name of mortuary chair antique soup terrines . The Lancashire chairs, on the other hand, have panelled backs and I have an example in my possession on which the carving is very similar to that on a set in the ancient Chetham’s School, Manchester, which dates from the mid-17th century royal sheffield candlesticks . The finials on the uprights of my chair are the same as those on a settle which appears in Brueghel’s painting The Village Wedding meissen scattered flowers tea sets . The Brueghel picture was painted about 1530 and so we realise the slow movement of continental influence showing itself in the north of England over a hundred years later 16th century japanese tables .
Portuguese and Spanish characteristics, entering England directly through royal marriages or more deviously through France and the Netherlands, considerably affected the design of William and Mary chairs scriptoire . Here is found the tall, narrow back and the scrolled foot which during the reign of Queen Anne was to develop into thy, cabriole leg art deco polished matte lost-wax castings o nude women in bronze by viennese artisans . On these chairs the design of the upper back rail is often repeated in the lower front rail antique chippendale dining chairs with bronze leg decoration .
The type of chair which evolved during the first decade
of the 18th century was very pleasing to the eye antique brown staffordshire . The first cabriole legs were quite plain but the chair-makers of the lime did not consider that the chair legs were sufficiently strong to be made without connecting stretchers antique dining room with bulbous legs . However, by introducing a deeper seat rail it became possible to make a stronger joint at the top of the chair leg and eventually the stretchers were dispensed with altogether antique dresser names . The chair-backs of the Queen Anne period were of a pleasantly rounded appearance with a fiddle-shaped central splat, curved to support the sitter’s back meissen figures .
During the early Georgian period the cabriole leg remained in favour and without the stretchers was more sturdily fashioned than the finer Queen Anne shape 17th century writing desk . Moreover, it became the custom in the better class of chair to ornament the knees of the cabriole legs with carved shells, acanthus leaves or satyr masks american art deco bar furniture . Instead of a simple pad at the bottom of the leg, the ball and claw foot was adopted 19th century pennsylvania furniture prices . This was a pattern derived from a Chinese dragon motif which clasped in its claw a celestial pearl 19th century antique hall table . All-over upholstery of chair backs now became fashionable, but it was a vogue which died out when Chippendale and his contemporaries introduced the elaborately carved chair backs of the mid-18th century duncan phyfe table and buffet .
Chippendale included a straight, square sectioned leg among the designs for his chairs and when made in the Chinese taste these were covered in low-relief carving to simulate lattice work edward round drum tables . As if there was some doubt as to the structural efficiency of these legs, the use of stretchers was re-introduced art deco round glass chinese painted coffee table value . Chair backs were generally rectangular, whether the style was Gothic, Chinese or one of the many rococo patterns which decorated the pierced splats antique bedside toilet . Some of these complicated designs from Chippendale’s Director were rather pleasingly simplified by country craftsmen, e antique silver fish knives ivory handle .g english knife box . the well-known rush-seated ladder-back chair early american wall mirror .
Around the beginning of the 18th century the wing-wardly curving upholstered arms and cabriole feet antique german breakfast table . Later in the century the arms were made more upright and the side wings larger victorian cherry drop leaf table . The wing-chair is deceptive both in size and comfort small antique dressing table with cabriole legs . It often looks smaller than it really is and care should be taken before buying one to ensure that it will really fit in wherever it is intended to go early 19th century mahogany desks with lion feet . Although the winged chair marked a great advance in human comfort at the time, the unsprung seating feels hard compared with the resilience of 20th-century upholstery antique inlaid marquetry dutch chairs .
While George Hepplewhite was known to have made a considerable quantity of furniture to the designs of Robert Adam, he himself was probably responsible for many well-known types of chair such as the shield-back, the oval-back and the feathers pattern sofa table mahogany antique . The backs of Hepplewhite’s chairs were more rounded than those of his predecessors and he also favoured tapered legs which were often fluted utensils used in britain for cooking . His furniture generally was of a lighter appearance than that which had gone before occasional tables painted india . Sets of dining chairs usually consisted of ten or twelve single chairs and two arm-chairs or carvers antique rectangular drop leaf dining table . These latter were designed to accommodate the broad figures and full frock coats of the l8th-century gentlemen and the seats were made proportionately wide rue la la . The curve and sweep of the arms is also noteworthy for they were cut from solid blocks of mahogany of a size which would make it uneconomic to employ in modern reproductions “myott, son & co” .
Robert Adam designed his chairs to match the classical interior decoration of the houses he built vintage wooden card table . They had turned and fluted or tapered legs and the lyre-back pattern was typical 19th century glass fronted cabinet . He contrived some elegant gilded chairs whose backs were adorned with small painted medallions on which appeared figures from Greek and Roman mythology georgian dressing tables . These were painted by contemporary artists like Angelica Kauffmann and Zucchi lenci mermaid figurines . Adam also introduced the fashion for painted beechwood furniture, and chairs in this style were often finished in black or white paint, neatly lined with gilding kem weber furniture designer prices .
For some time previously gilded furniture had enjoyed considerable popularity art deco reproductions clock . It is said that it was first introduced according to the wishes of the wives of those Georgian gentlemen who were filling their Palladian mansions with the rich but somewhat sombre mahogany furniture rare antique drop leaf . Quite a large proportion of this gilded furniture was imported from France and it is very difficult to identify English made chairs from the French originals german antique work tables . French chairs are believed to have upholstered pads on the arms and small peg-like ends to the scrolled feet while English gilded chairs are supposed not to have had any upholstery on the arms while the scrolls reached right down to the end of the legs bauhaus style furniture +scale . 1 have, however, seen both English and French chairs with variations of all these characteristics oriental writing bureau cabinet .
The rectangular chair-back returned with Thomas Sheraton, who of all the 18th-century designers could probably claim to have the greatest delicacy of taste antique chamber cabinets . He owed this success to a lightness of construction, hitherto unattained, and to his use of the natural beauty of the mahogany and satinwood grain directoire sofa . This he left without embellishment except for a slight amount of inlay and some boxwood stringing along the edges antique 18th century cedar chest . Sheraton was very close to the 20th century in his chair designs and I have seen dining chairs produced by well-known designers of the present day where the influence of Thomas Sheraton has been very strong indeed andre delatte .
Regency chairs have a distinctive elegance of their own, and although they could be bought quite cheaply in sets before the 1939-45 War, today they are very much in demand nest of 20 drawers . They are rather simply shaped with slender, turned legs and attractively scrolled backs antique art deco fixture . The back rails are often inlaid with ebony or brass and the lower rail is sometimes found carved like a rope length silver forks made in london . It was during this period that the top back rail was constructed so that it protruded on either side of the uprights, this design often being associated with the so-called sabre-shaped leg small sterling silver clocks .
The Restoration spiral twist now re-appeared in the Abbotsford furniture of the early Victorian period antique kayseri silk carpet pictoral niche . These chairs were usually made of walnut or rosewood but could never be mistaken for late 17th-century pieces antique oakchamber pot chair with hinged top . In spite of their rather fussy character and beadwork upholstery they are attractive and well worth acquiring bone handled fork converted to knive . About 1860 the cabriole leg returned to favour and many sets of attractive chairs, designed for the drawing room or parlour, were produced walnut escutcheons . Country-made rush-seated chairs with turned spindle backs and club legs date from the early 19th century and are still made in some northern counties french table stretcher draw leaf .
The origin of the Windsor chair is shrouded in mystery, as is also the name antique dresser with drawers stamped 54 . The tale that George III discovered this turned-wood type of chair at a house in the Chilterns and found it so to his liking that he had it sent to Windsor for his personal use may be accepted with that degree of credulity accorded to many fables concerning antiques cabinet makers antique work bench . Some authorities date the Windsor chair from the late 17th century and others from the mid-18th edwardian wardrobes . It is more than likely that in areas such as the Chilterns, where there are extensive beech forests, turned-wood stools and chairs have been produced for a very long time, even as far back as the 16th century desk boulle style . The Windsor chair as it is known today was really a product of the 18th century and it was probably during that time that it reached that very high degree of functional design for which it has become famous william kent eagle console table . Traditionally, these chairs have legs and spindles of beech which until a short time ago were shaped on crude lathes in the beechwoods by turners known as bodgers antique draw leaf dining table . The hooped backs and arms were made of ash which could be easily steamed and bent to shape while the seats were of elm because they could be cut in one piece from the broad elm boards silverware sets real fake . Some Windsor chairs have yew-wood arms, backs and spindles but are rather more rare and consequently more expensive to acquire italian provincial furniture . Those which have a shaped central splat in the back with a small wheel-like figure incorporated in the design are usually referred to as wheel-back chairs german antique sideboards and buffets fluted .
I have already mentioned sets of Georgian dining chairs and these command a high price, even when country-made russian porcelain antique . Due to a 19th-century custom of dividing sets of chairs among the beneficiaries of the will on the death of the owner, it is quite common to find single specimens or pairs of chairs of almost any period in sale-rooms and antique shops 18th century victorian toilet in dining room . Accordingly, it is not a difficult matter to collect what is sometimes referred to by the antique trade as a harlequin set of different chairs, either of the same or various periods empire curved bureau . In my dining room I have a very pleasant example of the Hepplewhite period, a pair and one single chair of Sheraton design, and two Regency carvers song dynasty bluish green glazed earthenware . None of these cost more than £5 and some much less countries that art deco was very popular .
High-backed oak settles look cosy and attractive before an open fire in a country inn but they are not really very comfortable and seldom fit in with a modest collection of antique furniture 18th century king george red velvet arm chair value . They often have a chest beneath with a hinged lid in the seat and sometimes shaped wings at the sides to combat the draughts pilaster bookstand price . The low-back settle or panelled settee with cabriole legs and a long overlaid cushioned seat are a better proposition and can be bought for under E10 antique cherry drop leaf table claw foot .
Of much rarer vintage is the double seated settee or love seat, designed according to tradition for the use of courting couples “desk”+”antique” . I believe that this is just another fable as these seats are not infrequently found in pairs, the second one provided, perhaps, for the chaperone simple design dressing table . More likely these love seats were merely part of the seating accommodation provided in a large salon or ballroom for the assem-blies and routs so much beloved by the Georgians ornate antique silver roast serving platter .
Longer settees with cabriole or square Chippendale type legs, and with padded arms and upholstered seats and backs, made an appearance in the second half of the 18th century francaise antique . Apparently they did not develop in popularity as there are comparatively few about and their places were taken by the sofa and couch swansea duck egg .

Tables, Dressers and Sideboards
Medieval boards and trestles—survival of the term “board”—the Tudor refectory table—pull-out or draw-leaf tables—the cre• dence and origin of the gate-leg table—long period of the gate-leg—occasional joined tables-18th-century patterns with club legs—the composite “D” end table—tripod tea tables with dished and pie-crust tops—dating by shape of feet—early games tables-18thcentury card tables–Sheraton quartette or nest tables—variations of the Pembroke style—sofa tables and early 19th-century folding tables—early dressers—dressers developed from side tables—Welsh dressers—appearance of the sideboard—Victorian chiffoniers mason’s patent ironstone china .
In the communal life of medieval times the servant ate with his master and his place at the table was a kind of status symbol regency revival furniture . The master would sit at the head with his guests and family; next would come the retainers of importance such as the steward and the priest and finally the servants expensive antique plates . Accordingly the table was a very long one and as the great hall was also used for recreation and even for sleeping the table had to be constructed so that, in spite of its size, it could be easily dismantled and put to one side when not required furniture+scallop+wheat .
Tables of the Gothic period were referred to as boards and trestles and were made in a variety of styles edwardian c19th construction buildings . Sometimes the supports were as those illustrated in the Luttrell Psalter and later they took the form of pedestals french words for dinner stand . Until the middle of the 16th century the table top consisted of a massive board of oak or elm boards nailed together 1600 century scroll back chair . When laid over the trestles or pedestals the very weight preserved its stability table consoul antiques caried or gold “rococo” . Even to this day, landladies advertise “board and lodging” and we still speak of a board of directors, a board room and a board of governors flemish trestle table . It is interesting to note how this term, used to describe a council of men and women meeting around a table, is a survival in our language from a very distant past catherine the great of russia plates .
By 1550 the communal life of the hall had begun to disappear john bell, porcelain, value . Houses were being built with a greater number of rooms and master and man took their meals apart kent silversmiths bread basket . There was no longer a need for the long trestle table and so a smaller table with a permanent underframe and legs was taken into general use writing cabinet officers antique . It was probably a smaller adaptation of the joined tables used in the abbey refectories and nowadays the term, refectory table, is used to describe it, although it was a purely domestic piece of furniture types of bureaux .
The refectory table, which was in everyday use from about 1550 to 1660, was usually 8 to 12 feet in length art deco brass stool . It was stoutly constructed with four, six or eight legs with bottom rails between them, and the top permanently fixed 19th century chairs’ . The underframing was made of oak but the top was often of elmwood, because of the wide boards which could be obtained from that tree antique neoclassical .
During the reign of Elizabeth I a variant of the refectory table, known as a draw-leaf table, appeared on the scene earthenware mixing bowls antique with handles . It enabled a comparatively short table to be extended to nearly twice its length by pulling out under-leaves from both ends dinnerware silver tureen . It was a design introduced from Flanders and France and it enjoyed an equal popularity with the refectory table botanical whimsies are considered some of the finest examples of art nouveau glass . Both of these types were displaced by the gate-leg table after the Restoration but the draw-leaf table has been revived during the 20th century and many modern homes possess similar, but lighter versions of the Elizabethan prototype steel dining table germany .
During the second half of the 16th and the early years
of the 17th centuries, table legs were massively made and often took the form of heavy bulbous turnings english creamware marks . On Flemish tables these swollen shapes are often spherical, like a melon, but the English versions were considerably more elongated with rounded tops and bottoms dresden german antiques . It has been said that these bulbous legs were functional in that they were designed to prevent rats climbing on to the table tops ant cherry antique dictionary tables . I have it on good authority from a biologist friend that any self-respecting rat could easily leap on to a table without any climbing aids 19th century gothic bedside tables .
Between 1600 and 1630, a small but sturdily constructed kind of side table was developed antique chippendale “solid mahogany” dining table lions paw . It must be considered a somewhat rare example of early Stuart furniture as examples these days are seldom encountered ernst archibald furniture . The tabletop was of the folding type, that is, it consisted of two halves hinged together and normally kept closed cherry ladies writing desk by pennsylvania house . When required for use, the upper leaf would be opened outwards and this would be supported by a fifth leg, which could be swung out as in a gate-leg table serpentine pembroke table . Actually, this small table was the forerunner of the gate-leg pattern turkish style sideboards uk . It is sometimes referred to as a credence table, which was placed at the side of the altar in the churches and on which the wine vessels and plate were arranged for use in the Communion service antique “trestle table” kent .
The gate-leg table, as already mentioned in Chapter 1, became generally fashionable after the Restoration and, in one form or another it is the one type of table which has been in continuous service ever since art deco polished matte lost-wax castings o nude women in bronze by viennese artisans . Usually made with a gate on each side, some larger tables are to be found with quadruple gates “art deco dresser” and “marble top” . These were of the period when spiral twist legs were in vogue and were made of walnut or, occasionally, of oak louis xv antique french commode .
A small type of side table, with a drawer and bobbin turned or baluster legs, must have been made in large numbers towards the end of the 17th century as they are frequently to be found in sale-rooms and antique shops antique music cabinete with mirror at the top . The finer versions are sometimes veneered and have curved stretchers as illustrated in Chapter 2 federal style table with brass paws . A more common and probably country-made variety is the so-called tavern table with its top overhanging the ends to a more than usual degree trent potteries designs by george jones . The drawers of these tables are sometimes found with joiner’s slides on the sides porcelain wincanton .
After being generally adopted as a dining table during the Restoration period, the gate-leg table was given a variety of leg shapes over the next hundred years rene lalique nude woman art deco lamp . Baluster and spiral twists gave place to scrolled legs and eventually to a type of cabriole shape known as the club leg italian,furniture,maker,address . Except for use on extending card tables, the cabriole leg was not ideally suited to larger table design, but the club leg variation remained in vogue until the introduction of the Chippendale square leg and the tapered legs of the Adam and Hepplewhite eras deco style dressing table .
It was customary during the late Stuart and William and Mary periods for a host to seat his guests at several gate-leg dining tables if the company was a large one sheffield rote iron . By the mid-18th century, however, long mahogany dining tables at which all the company could be seated, began to appear in the more important households antique wood cutlery urns . For over fifty years, these long dining tables consisted of one or several gate-leg tables, with rectangular side-leaves, which were joined together and semi-circular “D” end tables were placed at each end to make up the piece ruhimann table . The wide mahogany boards, introduced during the previous decades, rendered the construction of the broad table-tops a relatively simple matter antiques antique oak sideboards dutch style .
When only a few people were at dinner, the “D” ends would be placed against the wall to serve as side tables and only the gate-leg would be in use new york antiques light art deco . These “D” end tables are quite often to be seen in antique shops, either singly or in pairs, and it is not always realised that they have originally been part of a long Georgian dining table antique mahogany handkerchief table . When placed together, a pair of these tables make a very attractive circular dining table, which would be admirably suited to a present-day flat or smaller modern house http://antcollectors.com . The long “D” end tables continued in use well into the 19th century but the tapered legs were in time replaced by centre pedestals, each supported on four long curved feet antique furniture spanish art nouveaux . These were usually reeded and had brass-capped ends with castors or brass leopard-paw ends wheat antique dresser .
Designed during the closing years of the 17th century, but not becoming generally popular until fifty years later, the small, snap-top, tripod table with a circular top is probably one of the commonest pieces of antique furniture to be found today walnut escutcheons . The hinged top of the simpler country-made examples is usually flat but a tea table with a dished or slightly hollow top is not uncommon reproduced oval shaped dinnig table with lion’s paw . The dished top was designed to prevent spilt tea or milk running over on to the carpet campaign furniture pottery furniture . A more elaborate type of the dished top was known as a pie crust early 19th century mahogany desks with lion feet . Here the edge was carved into a series of scallop shapes, but genuine pie-crust tops are rare and there are many reproductions about value of george iii english mahogany gateleg card table? . Some tripod tea tables have an open, box-like structure fitted underneath, known as a birdcage and into which the single, central pillar is made to fit dutch silver 17th century . With this device, the table top not only folds upwards but can also be rotated so that any dish upon the table may be brought within reach of the guests period antique mahonany dining table with lions paw pedestal legs .
It is possible to date a tripod table, to within twenty years, by the shape of the feet tilt-top birdcage tea table . As illustrated on p small antique pembroke table fold-over . 63, the feet of around 1750 to 1770 have a flatter curve with a wider spread, while those of 1770 to 1790 have a more pronounced hump at the knee antique imari porcelain . From 1790 to 1810 approximately, the curve of the feet was reversed and by the time of the Regency, slender, concave shaped feet had been introduced toilet habits during 1800th century . The early Victorian period saw the revival of the “S” shape, but this was usually rather thick in proportion and decorated with elaborate carving bassano maiolica .
Tables which were specially designed for playing games were rare during the 17th century but an interesting piece, known as a shuffleboard table, is sometimes to be found in the long galleries of our greater country houses 18th century antique american gateleg . The long galleries were built for leisure and relaxation so that during the winter months, while the gentlemen went hunting, the ladies could take more gentle exercise indoors dressing table with small tables . The shuffleboard table can best be compared with a shove-ha’penny board, save that large brass discs were used instead of coins and the table top was often very long rh vase austria . There is one at Astley Hall in Lancashire which has twenty stout legs and is 2712 feet long jennens and bettridge . It must have been prefabricated and then assembled in the long gallery as it is far too large ever to have been brought up the staircase in one piece botanical antique ceramics collectors .
During the reign of Queen Anne and the Georgian period, card games were extremely popular and folding top tables with cabriole legs were in general use during that time finmar alvar aalto stool . These tables were, mostly made of walnut and had small recesses near the edges of the top to hold the guineas or counters while small circular platforms were provided at each corner to hold candlesticks for the night’s play fashion in the 16th century netherlands .
Card tables and tea tables, particularly the folding, semi-circular variety with tapered legs, were made to an almost identical pattern, the only difference being that the games tables had inset baize tops while the tea tables were of polished wood how a goldsmith made a candlestick . The early 19th century saw the production of many small games tables with tops inlaid for chess and backgammon and with drawers beneath to hold the apparatus for the games end tables lions head table with brass eagle claws on legs .
To Sheraton must be given the credit of designing the nest of tables, the idea for which appeared in his Cabinet Directory in 1803 antique kidney shaped dressing table . The nest comprises four small, separate tables which all fit one under another splay leg sofa table . They were originally referred to as quartette tables and being very lightly con-structed and somewhat fragile, it is uncommon to find an original, complete set of four istoriato china . Luckily, I have such a set in my possession which I believe was made by Gillow of Lancaster old gateleg wooden drop leaf tables . It was salvaged from a second-hand furniture shop, the tables being scattered around among the jumble and the shopkeeper having no idea, apparently, that they formed a unique set kakiemon bow price .
Small Pembroke tables with side flaps supported by hinged brackets and said to have been designed originally at the request of the Duchess of Pembroke for occasional use, appeared about 1775 mahogany french dining chairs . They were common in late Georgian homes and in the early part of the 19th century a larger version was made to serve as a supper or breakfast table rectangular drop leaf table antique .
Sofa tables were designed to stand behind a sofa and to carry such things as reading and writing matter, trays of refreshments and candelabras rococo display cabinet . A few years ago, they were fairly common but are now in such great demand as bedroom dressing tables, that they have become a somewhat rare and expensive item pop up cigarette deco dispenser .
The Regency and early Victorian periods saw a vast number of tables with folding tops, made to stand on a central pedestal with three or four feet value of clawfoot cabriole legged dressing table? . In this type, the double top, when opened out, could be rotated so that it was supported by a rectangular underframing odiot tureen . These tables were used for games, writing, serving tea and a whole host of leisure activites french scrolling art nouveau style chairs .
A necessary adjunct to every dining room is a sideboard and to every kitchen or living room, a dresser trestle draw leaf table . The sideboard, as its name implies, was a small side table in those far off days when a dining table was referred to as a board gateleg drop leaf table 19th century . As the piece of furniture we know, it did not appear until the second half of the 18th century 18th century french fashion . The dresser, on the other hand, is of far more ancient lineage and in the painting of the More family by Holbein, referred to in Chapter there is shown in the background a high-backed, canopied Gothic dresser, or, as it was called in that period, a dressoir dutch rococo walnut cupboard . These dressers were really related to the cupboard or buffet and further reference will be made to them in the chapter on Cupboards vintage porcelain plate with brass pedestal .
Dressers with a high back were out of fashion during the early Stuart and Commonwealth times but there were two simpler types in general use aaron burr antique furniture . One was made in the form of a long, narrow side table with three or four deep drawers refectory tables trestle . It stood on four or six legs and had an under shelf, as wide as the dresser top, near the floor level antique epergne glass . This was, no doubt, used for the display of brass and copper ware what were wood tables with porcelain tops used for . The other type was a development of the chest and presented a more solid appearance, the entire front being filled with drawers and small cupboards demilune chiffonier . This second kind of dresser was not generally adopted until after the Restoration but both types were used then until the end of the 17th century drop leaf table with lion claw feet .
By the beginning of the Georgian period most dressers were fitted with a set of plate shelves which stood at the rear of the dresser top poole pottery est. 1873 . This version was usually referred to as a Welsh dresser and while it may have been popular in the Welsh farmhouse kitchen, it was undoubtedly made throughout Britain during the 18th and 19th centuries drop leaf table with spiral turned legs . Occasionally dressers are found made in walnut but more frequently in oak with the edges of the drawer fronts and the cupboard doors cross-banded in walnut or mahogany antique cabinets coat of arms .
Long sidetables were normally used as sideboards in early Georgian dining rooms and on these would be placed the knife and fork boxes with the cellaret for wines underneath antique french ormulu furniture . It was about 1775 that the first sideboards were designed with drawers for the silver and cutlery and deep cupboards on either side to hold the wines boulle table . Sheraton is supposed to have added the low brass rail with a small silk curtain at the back to the designs for bow-fronted sideboards, which had originated during the Hepplewhite period goldscheider staffordshire myott .
In Victorian times, some monstrous sideboards were created with the addition of the most elaborate carving chamber pot cabinet . In the great dining room at Charlecote Park, near Stratford upon Avon, there is installed such a piece of furniture with carved effigies of every variety of edible fish, animal and fowl hanging in great swags from every point and corner chestnut tables antique . This monument to the questionable good taste of the Victorians is all meticulously worked in varnished oak, a spectacle which must have made the shade of Grinling Gibbons sadly shake its head turn a silver tray into a table .
On the other hand, it was during the mid-Victorian period that a very attractive little sideboard, known as a chiffonier, made its appearance antique claw foot table . It was equally useful as a sideboard for a small dining room or as a cabinet for a drawing room fish tail knife 16th century fruit knife 15th . Made in mahogany or veneered with burr walnut, it was certainly one of the more commendable inspirations of the designers during the Victorian era american antique slant front desk .

Walnut Period
CHINA CABINETS
It was probably Queen Mary who set the fashion for collecting china. Trade with the East brought about the importation of Chinese pottery and it soon became a popular craze for people of wealth to collect fine specimens. Cabinets to contain them followed as a matter of course, and it was therefore in the last quarter of the seventeenth century that the first china cabinets were made. An example is given in Fig. 85. There are many typical features about it ; the turned legs with the inverted cup detail, the apron piece finished at the edge with a cross-grained bead, the flat stretcher rails, the cross-banded doors, and the shaped cornice, also cross-grained. Glazed doors were essential, and in them we have an early example of the barred door.
The probability is that in the first instance the bars were not purely decorative. Panes of glass in a large size were difficult to produce, and the method of subdividing up the space with bars to enable small panes to be used suggested itself as a solution to the difficulty. In the event it proved extremely successful as a form of decorative treatment ; so much so that during the eighteenth century bars were used in various designs almost as a matter of course. It is just another example of the way in which advantage can be taken of the limitations of material to produce an effect which not only looks well but seems characteristic of the work.
MIRRORS
Whilst on the subject of glasswork, we may turn to the mirror, which was first made in fairly large quantities towards the end of the seventeenth century. Earlier examples are in existence, but they were mostly made in Italy and imported, though a few Italian craftsmen settled in the country early in the seventeenth century and began producing in a small way. The chief impetus came later, when works were established by the Duke of Buckingham in London. Mention of them is made by Evelyn in his diary of 1676, when he paid a visit to them.
Two examples of hanging wall mirrors are given on p. III. That to the left is perhaps the more usual type. The actual framework is a rather flat moulding with the grain running crosswise. Typical sections of the mouldings used are given on p. 125 at the bottom, left. They were built up on a foundation of pine or oak to provide the strength, and the walnut was glued to the upper face in  LACQUERED CABINET ON STAND.
Second half 17th century.
Oriental cabinets were frequently imported, and carved stands were
made to hold them. Later rather crude imitations of Oriental lacquer
were attempted here.
cross-grained strips. The section was then worked as in an ordinary moulding. Usually the top corners were either rounded, as in Fig. 86, or they had the rather typical series of short squares and curves, such as in the door in Fig. 84. The fretted pieces at top and bottom are invariably found in such mirrors.

The other example, Fig. 87, is of quite different feeling, having an architectural character probably inspired by the details found in the windows and doorways of the period. The groundwork is in walnut and the carved mouldings and details are gilt. Both types were produced in fairly large quantities, and the size was invariably small for the reason already given. In addition, small toilet glasses were made, these having either a plain stand with uprights between which the mirror was pivoted, or a small nest of drawers to hold cosmetics arranged with the uprights tenoned in above.

GEORGE IV AND WILLIAM IV
WHEN GEORGE III in 1820, his
scandalous son, who had been ruling as Regent for nine years, became King George IV Known [or his extravagant tastes, the interiors created during his reign, particularly those at Windsor Castle, are some of the most sumptuous in British history. The reconstruction of the apartments on the east and south sides of the Upper Ward of the Castle between 1824 and
1830 was entrusted to the architect Sir Jeffry Wyattville. The furniture and upholstery was supplied by cabinetmaker Nicholas Morel. These heavily gilded interiors have a French flavour.
On George’s death in 1830, his brother became William IV In contrast to the worldly pursuits of his predecessor, William’s reign was dominated by the Reform Act, which brought about parliamentary reform.
However, this period also marked an important period of transition between the Regency and Victorian eras. Much of the furniture was still Neoclassical in style although it was generally
heavier than Regency pieces.
TOUS LES LOUIS
The interest in 18th-century French
styles dates from the late 1810s, when
French furniture became
available after the Revolution.
These pieces, especially those with tortoiseshell and brass boullework, were collected by, amongst others, the Duke of Wellington and the Prince Regent. Sometimes called the Rococo revival, it was known (incorrectly) at the time as the Louis XIV style. The serpentine lines of Louis XV furniture were re-interpreted on furniture typical of Louis XIV or XVI.
style was particularly appropriate to seat furniture with buttoned, upholstered backs or sides and plump, cabriole legs. Case furniture tended to have rectilinear, classical lines.
The Old French Style was promoted in a series of pattern books from 1825, including publications by John Taylor, Henry Whitaker, and Thomas King.
John Weale published reprints of mid 18th-century pattern books by Thomas Chippendale’s .
LATE REGENCY
Much of the mahogany furniture of the period was a heavier version of Regency designs, anticipating Victorian solidity. Carving was often Classically inspired and combined with gadrooning and ribbing. Bun feet were used on chests of drawers or plinth supports. Chair and table legs were often turned and ring-turned rather than outsplayed or sabre-form. Bed-posts were similarly designed, sometimes with acanthus carving.
This burr-oak and ebony-inlaid rectangular George IV library table has a crossbanded top above a frieze with two drawers. The table top is supported on quadruple baluster end columns linked by a stretcher. Stamped Holden & Co, Liverpool. Early 19th century.
LIBRARY TABLE
WILLIAM IV SOFA
The panelled top rail of this elegant mahogany sofa is flanked by scrolling terminals depicting acanthus leaves. The lower arms of the sofa are upholstered to match the back and seat cushion. Two bolster cushions provide added comfort. The piece has leaf-carved urn
terminals and is supported on turned and carved tapering feet with brass caps and casters. Early 19th century.
The arms are decorated with leaf motifs.
The back of the sofa is decorated with scrolling acanthus carving,.
WILLIAM IV TRIPOD TABLE
This painted tilt-top table has a rectangular top above a single column, which is supported on a tripod base. There is an armorial design painted on the surface of the table. The piece terminates in bun feet. c.1835.
This elegant mahogany bed has a moulded cornice decorated with a carved frieze and supported on four turned and carved bed posts. At the foot, the posts are reeded and leaf-carved, while at the head of the bed the posts
GEORGE IV LIBRARY ARMCHAIR
The upholstered tub back of this library armchair has a U-shaped front, which has been faced in mahogany and carved with reeds and roundels. The chair is supported on turned and reeded legs that terminate in brass casters.
The chair is one of a pair. Early 19th century. DN
are plain, enclosing a panelled head board (formerly the foot board). The scalloped pelmet and drapes are made of a floral fabric. Early 19th century.
This mirror has a rectangular plate within a gilt and silvered wooden frame, surmounted by a laurel wreath and carved with berried laurel. The lower section has a central scallop shell motif with a thistle below, flanked by rocaille, plants and foliage. One of a pair. c.1830.
WILLIAM IV MIRROR
LIBRARY TABLE
This tortoiseshell-veneered library table has a moulded edge above a shaped apron, and is supported on cabriole legs. All of the surfaces are decorated with tortoiseshell and embellished with gilt-metal mounts. c.1830.

george i early 18th century chest on chest
george i early georgian furniture
george iii sheraton mahogany bowfront sideboard valuation
george iii welsh dresser
george iv furniture mark
george iv settee with clawfoot
george iv sideboard
george jones & sons majolica vase
george jones abbey design antiques
george jones american ceramic decorator
george jones and sons china
george jones candlesticks
george jones ceramics marks
george jones china for sale
george jones fish lustre
george jones majolica
george jones majolica leaf plate
george jones potter
george jones pottery marks
george jones pottery value
george jones unmarked majolica ware
george jones vintage case knife
george jones” porcelain figures”
george nelson primevera drop leaf table
george oakley cabinet maker
george oakley furniture london
george smith 19th century furniture
george smith gate leg dining table
george smith gate leg table
george smith sofa value
george two pedestal table
george walton arts and crafts chair
georgelll side boards
georges de feure chairs
georges de feure insect
georges jacob
georgian “chamber cabinet”
georgian and victorian tables difference
georgian antique china cabinets
georgian black lacquer chairs
georgian carved round face antique furniture
georgian chippendale dresser+inlaid+”5 drawer”
georgian chippendale dresser+inlaid+mirror+scroll
georgian cylinder bureauand display cabinet
georgian dining chairs sheraton  value
georgian drop leaf side tables
georgian drop leaf writing bureau
georgian footstools
georgian furniture cabinet dresser like house
georgian furniture makers stamps
georgian gateleg drop leaf table
georgian gateleg table scallop corner
georgian mahogany table spider legs
georgian oak drop leaf table
georgian pedestal drop leaf table
georgian period antique doors
georgian period basic chairs
georgian period chair
georgian period chairs
georgian period furniture
georgian period pattern
georgian pie crust pedestal end tables
georgian rectangular gate leg table
georgian reproduction pedestal coffee table
georgian serpentine cutlery boxes
georgian shagreen knife box
georgian sheffie ld war mer
georgian side table marble top
georgian sideboard with ring turned legs
georgian style chest carving
georgian tambour top desk
georgian tub chairs
georgian walnut drop leaf table
georigian period chairs

MID 19TH CENTURY SOFAS
THE MAJORITY OF 19th-century sofas were designed either for comfort or for formal seating. The fluidity of the revival styles during this period allowed for a certain poetic licence in the designs.
COIL-SPRING UPHOLSTERY
The French fashion for upholstering their luxurious canapes with sumptuous, overstuffed seats and padded backs soon spread across Europe. The increased thickness of the upholstery was the result of the introduction of coiled springs. These were, in themselves, quite deep, but they also required a thick layer of padding to prevent them from piercing the seat cover. Deeply set buttons were used to hold both the springs and the padding in place, and became a feature in themselves.
The fabrics used to cover these upholsteries were often extremely expensive, making it necessary to
shield furniture from direct sunlight, hence the Victorian reputation for gloomy interiors. Both petit and gros point were popular.
The confidante, or tote-d-tote, evolved from the standard French canape as a slightly less formal design, allowing couples or parties to sit together and converse while facing each other. These were fairly variable forms, as were many of the Rococo-revival, show-frame sofas, chaises longue, and daybeds made at this time. They contrasted with Neoclassical- and Empire-revival styles, which made greater use of flat planes and regular angles.
Towards the end of the period, influences from the Middle East and the Orient began to infiltrate sofa design in the West. Turkish-style daybeds, Chinese bamboo frames, and the no-nonsense Arts and Crafts aesthetic started to reverse the trend for decadent, comfortable seating.
The lion’s heads are supported on turned columns.
The arched top rail above the panels is inlaid with floral marquetry.
The seat back has scroll-topped supports.
The capriole legs terminate in claw-and-bail feet.
Each seat is CauCaVcfronted with a marquetry inlaid apron
The base of the chair back is galleried, with turned spindles.
DUTCH HALL BENCH
The triple concave-shaped back of this mahogany and marquetry-decorated bench has a moulded crest and a carved lion’s head at each seat division. The sweeping arms terminate in carved heads. The shaped seat
has a similarly shaped apron and is raised on four carved capriole legs to the front and two slightly sweeping, square-section legs to the back. The entire bench is profusely
decorated with marquetry inlay, depicting flowers, leaves, urns, birds, and insects.
This early Victorian, Rococo-revival, show-frame sofa is made of rosewood and has a generously upholstered seat, arms, and back. The serpentine seat is supported on scroll-carved cabriole legs, terminating in ceramic casters. c.1850.
BRITISH WINDOW SEAT
This mahogany, Regency-revival-style window seat has an upholstered back, outswept sides, and seat. The frame of the window seat is carved with acanthus and is supported on scroll legs with paw feet. c.1900.
BRITISH SHOW-FRAME SOFA
FRENCH DAY BED
This carved walnut and upholstered day bed is designed in the Louis XVI style. The reeled and scroll arms carved with leaves and the loose cushion seat are covered in a beige fabric and raised on turned and stop-fluted legs, joined by
a rope-carved apron. This piece would have been made for an alcove and placed parallel to a wall. It may originally have had a canopy of matching fabric suspended above it.
This carved oak and walnut bench has a galleried back with carved panels, depicting dragons, figures, and cherubs. It has square arms above a solid seat and is supported on spiral-turned legs.
This Louis XVI-style walnut canape has a carved crest rail above a padded back. The cushioned seat is supported on fluted, tapered legs, which end in peg feet. c. 1900.
This is one of a pair of Napoleon III-style ebonized sofas. The back is in three sections and has a central shaped, rectangular, upholstered panel flanked by two similarly upholstered oval panels in carved gilt frames.
The padded seat is supported on six turned and fluted legs, terminating in pad feet. The sofa is attributed to Charles-Guillaume Diehl. The tapestry upholstery was probably made by the prestigious Aubusson company. BK 6
AMERICAN SETTEE
This carved walnut settee has an undulating back and a crest rail carved with flowers and grapes. The padded, upholstered arms scroll outwards and show William IV influence. The padded, upholstered seat has a similarly carved
serpentine apron and has additional side cushions. The whole settee is supported on slightly cabriole legs. Chairs and sofas featuring elements of ornate, naturalistic carving in the Rococo-revival style were very popular in the United States, particularly between 1830 and 1865.
This walnut, tub-shaped settee has an upholstered back, armrests, and seat. Originally, it was almost certainly part of a salon suite. The settee has a pierced back and is supported on turned legs, terminating in brass
casters. Neoclassical in style, it was probably inspired by Sheraton’s furniture designs, combining the simple geometric forms of the pierced back with the gentle, curving contours of the seat and upholstered back shape. c. 1900.
This mahogany, Empire-revival settee has a scrolled crest rail, upholstered seat and back, and padded arms. The frame of the settee has Neoclassical gilt-brass applied mouldings throughout and is supported on turned legs. Late 19th
century.

19TH CENTURY CHAIRS
CHAIR DESIGN HAD NEVER been so
diverse as in this eclectic age. The different styles seen in other types of furniture also existed in chairs. Elements from the popular revival styles – from Classical acanthus
carvings to Gothic arches and all points in between – combined to create a multifarious riot of forms.
Chairs were often designed to complement other pieces in a room, but were also influenced by fashion, which resulted in the design of tow, wide seats to accommodate full skirts.
COMFORT FIRST
An emphasis on comfort was at the core of many mid 19th-century chair designs, especially those that emanated from France, where padded arms, seats, and backs were dc rigueur components of the Rococo- and Neoclassical-revival styles. In Britain, the easy chair was thickly padded in fabric or leather and
provided a respite from the more ascetic oak chairs in the Gothic style. There was a renewed interest in the designs of Chippendale, Sheraton, and Adam towards the end of the century.
Two separate interpretations of the Rococo style – the bentwood laminate styles of the Thonet and Belter factories on the one hand, and the padded giltwood offerings of French workshops on the other – both enjoyed popularity Classical motifs such as urns, acanthus, and festoons were equally prolific. Oriental and Anglo-Indian furniture expanded the canon of Western decorative arts to include elements from these two ancient Eastern cultures.
Salon suites al became popular in middle-class homes during this period. The suite typically comprised a sofa, a chaise longue. four side chairs, a lady’s armchair. a gentleman`s armchair, and a stool – all in the Louis XV style.
These open armchairs are made of white-painted wood and each have a flower-carved crest and apron. The seat, arms, and back are upholstered in a pale fabric decorated with a floral and foliate pattern. In each case, the
serpentine seat is supported on painted (formerly gilt) cabriole legs. The chairs are Louis XV in style and make an interesting contrast to the armchairs shown below. c.1880.
FRENCH OPEN ARMCHAIRS
Each one of this pair of giltwood open armchairs has an upholstered back, arms, and seat. The frame of each chair is carved with a scroll, ribbon, and swag crest and stiff lead
borders. Each chair has fluted, finial-surmounted supports and tapering legs, which terminate in brass casters. The chairs are Louis XVI in style. c1900.
GERMAN CHAIR AND ARMCHAIR
This solid mahogany chair and armchair are designed in the Empire style, with scrolled top rails and upholstered backs and seats. The supports. armrests, and seat rails are inlaid
with bronze decoration. The arm supports are giltwood sphinxes, while the cabriole legs have carved and gilt griffin heads and paw feet. c.1880.
BRITISH GENTLEMAN’S CHAIR
This walnut-framed gentleman’s easy chair has a Morocco-leather buttoned back and seat with studded decoration and outscrolled arms. It is a good example of a chair with coil springs. The chair is raised on turned front legs and casters. 1890-1900.
Carved splat panel
CHINESE ARMCHAIRS
These red-lacquered elm armchairs from Shangxi Province each have a scrolling top rail and a panelled splat carved with an animal and objects. Each panel seat with a carved seat rail is supported on square-section legs with stretchers. c.1880.
BLACK FOREST HALL CHAIRS
Each one of this pair of chairs has a stained and carved frame inlaid with hunting scenes on the back and seat. The waisted, pierced, scrolling back rises above a shaped serpentine seat, which is supported on cabriole legs.
AMERICAN SIDE CHAIRS
This pair of Rococo-revival, laminated, rosewood side chairs each has a shaped, moulded back, enclosing scrolling devices. The upholstered seats have a flower-carved rail and are supported on
cabriole legs.
BRITISH EASY CHAIR
This George III-style, mahogany, upholstered easy chair has a curved crest above rolled arms and is raised on cabriole legs with claw-and-ball feet. The chair has rose and beige silk damask upholstery. c.1900.
BRITISH OPEN ARMCHAIR
The rounded back and seat of this armchair in George I style are upholstered with gros and petit-point woolwork. The walnut frame has shepherd-crook arms and shell-carved cabriole legs, terminating in claw-and-ball feet.
ANGLO-INDIAN OPEN ARMCHAIR
This Empire-style armchair has a shaped top rail, a square-section back rail, scrolled arms, and cabriole legs. Every surface is covered with sadeli work decoration set within ivory and
ebony borders. c.1900.
ITALIAN ARMCHAIR
This lime and walnut armchair has an oval back with an upholstered panel framed by carved, gilt surrounds. The seat has a moulded top rail and is supported on cabriole legs. c.1840.
BRITISH SIDE CHAIR
The caned, shield-shaped back of this Sheraton-style, painted satinwood side chair is surmounted by a medallion, depicting a female figure. The seat is raised on square, tapering legs, which terminate in spade feet. c.1900.

antique chair “hale company”
antique chair art nouveau 1930
antique chair carved lions and legs
antique chair curved arm terms
antique chair examples
antique chair from czech
antique chair maple leaf carving
antique chair n.y. city
antique chair oak jacobean bobbin
antique chair patterns, designs
antique chair types pictures
antique chair with 18th century pattern
antique chair with a lion’s head on the back
antique chair with barley twist legs
antique chair with curved seat
antique chair with drilled holes
antique chair with flower pattern on back
antique chair with high arm one side
antique chair with horsehair
antique chair with king carvings
antique chair with lion head
antique chair with lion on the arms
antique chair with mother of pearl inlay
antique chairback settee
antique chairs carved flowers
antique chairs fish arms
antique chairs rococo style
antique chairs vienna
antique chairs with carved fish and inlay
antique chairs with lion head carved in arms
antique chais that folds over to bed

antique arm chair cabriole leg lions
antique arm chairs lion head
antique arm hall chairs
antique armchair with built in footstool
antique armchairs with faces