Posts Tagged ‘century’

Dishes
Pair of George III oval meat dishes by Frederick Kandler, London, 1765, 73 oz 2 dwt Pair of Victorian octagonal entree dishes and covers with
vegetable dividers for each and ball finials, Sheffield, 1880,
120 oz 14 dwt 450 0
George III circular vegetable dish with ivory grips, pierced sides and four scroll and foliate feet, by W.S., London, 1809, 80 oz 2 dwt 360 0
William IV shaped oblong entree dish and cover with engraved armorials and foliate ring handle, by J. C. Eddington, London, 1835, 61 oz 5 dwt 260 0
George III muffin dish and cover, the domed cover with urn
shaped finial, by Henry Chawner, London, 1791, 15 oz 1 dwt        210 0
Jugs—Cream and Milk
George III helmet-shaped cream jug with ‘bright-cut’ engraving, loop handle and square pedestal foot, by George Smith, London, 1790, 3 oz 7 dwt 80 0
George II cream jug of conch shell type with serpent handle and
three coral-like supports. Circa 1755, 3 oz 5 dwt 80 0
George III oblong milk jug engraved with crests and with gadroon lip and scroll handle, by R. and S. Hennell, London, 1808, 6 oz 2 dwt 70 0
Victorian baluster milk jug chased with flowers and scrolls and on three feet. Possibly by William Brawn, London, 1845, 5 oz 7 dwt 52 0
Jugs—Water
George III pear-shaped hot-water jug, stand and lamp, the jug with rams’ masks and laurel festoons, the stand on three claw feet with female bust terminals, by Andrew Fogelberg. The jug 1776, the stand 1775, 40 oz

780 0
George III vase-shaped hot-water jug, plain with wood handle and on circular foot, by William Fountain, London, 1801, 25 oz 11 dwt 460 0
George II baluster hot-water jug chased with scrolls, leaves and flowers, raffia-covered handle and rim foot, by Gurney and Cook, London, 1755, 19 oz 15 dwt 270 0
Jugs—Wine and Ale
Queen Anne ale jug, die ground embossed with foliage and flowers and a satyr spout, by John Wisdom, London, 1712, 35 oz 280 0
Victorian wine ewer with baluster body and engraved with Grecian figures and leaves, entwined snake handle and butterfly finial, by E. and J. Barnard, London, 1862, 27 oz 11 dwt        170 0
Marrow Scoops
Queen Anne scoop of typical form by Charles Jackson, 1713,
1 oz 10 dwt 68 0
Early George III scoop, the larger bowl engraved with initials,
probably by William Tuite, London, 1767, 1 oz 12 dwt 20 0
Mustard Pots
George III drum mustard with moulded borders, flat hinged lid and simple scroll handle, with spoon of earlier date. Pot by Ernes and Barnard, London, 1813, 5 oz 10 dwt 165 0
some auction room prices : 1968-69
William IV mustard with ribbed baluster body and hinged domed lid with floral finial, scroll handle and shell thumbpiece and spoon of same date but different maker. Pot by C.G., London, 1830, 6 oz 17 dwt
George III oblong mustard with domed cover, urn finial and angular handle on four bun feet, London, 1813, 3 oz 11 dwt
Salts
Four George I plain oval trencher salts with incurved sides, by
Mary Rood, 1723, 6 oz 15 dwt Pair of George III boat-shaped salts, reeded at the lips and
pedestal feet, gilt interiors, by Peter and Ann Bateman, 1792,
4 oz 6 dwt
Pair of George II compressed circular salts, with plain engraved bodies below gadroon lips each on three shell-headed hoof supports, possibly by Isaac Cookson, Newcastle, 1747, 8 oz 1 dwt
Salvers
George II large circular salver on four lions’ mask and shell bracket feet, the shaped border pierced and chased, by George Wickes, 1744, 137 oz
George I plain circular salver on central foot with moulded border, by W.P., 1720, 13 oz 12 dwt
George III circular salver, engraved with initials, chased wave border and gadroon rim, on three claw and ball feet, by Robert Rcw or Rugg, 1766, 24 oz 3 dwt
Victorian salver engraved in the centre with an initial and also with scrolls and foliage, moulded border, by J. and J. Angell, London, 1845, 25 oz 14 dwt
Sauceboats
Pair of George II plain sauceboats each on three shell and scroll feet with gadrooned rims and double scroll handles, by Peter Archambo and Peter Meure, 1754, 29 oz
George II two-handled plain double-lipped sauceboat on collet foot, with double scroll handles and waved rim, with a moulded drop beneath the spout, by Peter Archambo, 1732, 17 oz 5 dwt
Pair of George III sauceboats, each on fluted shaped lozenge foot, with gadrooned borders and double scroll handles, by William Sampcl, 1766, 25 oz
Snuff Boxes—See Small Decorative Antiques Sugar Basins—See Baskets—Sugar Tapersticks—See Candlesticks Tankards
William and Mary tankard on three lion couchant feet, scroll handle, cylindrical body and moulded base, by Robert Cooper, 1692, 31 oz
George II baluster tankard with domed cover, openwork thumb-piece and double-scroll handle, on moulded spreading foot, by William Grundy, 1755, 34 oz 5 dwt 650 0
George III baluster tankard, with domed moulded cover and heart-shaped lower terminal to the scrolling handle, by William Caldecott or Gripps, 1765, 27 oz 15 dwt 570 0
Tea Caddies
George III oval caddy, the body with two bands of bright-cut engraving in beaded borders and the plain hinged lid with urn finial, by Hester Bateman, 1781, 14 oz 10 dwt 900 0
George III shaped oval caddy, the body fluted at intervals, decorated with bright-cut engraving, hinged domed cover with wood finial, by Robert Hennell, 1787, 14 oz 17 dwt 480 0
Teapots and Stands
George II bullet teapot with engraved shoulder decoration of satyr masks, leaves and flowers, straight spout, loose lid, ivory handle and finial, by Isaac Liger, 1729, 15 oz 1 dwt 2,100 0
George III teapot stand on four fluted panel supports, by Hester
Bateman, 1789, 4 oz 15 dwt 280 0
George III oval teapot with moulded girdles and a matching stand, supported on four feet, by Crespin Fuller, London, 1800, 16 oz 15 dwt 270 0
George III oval, semi-lobed teapot, with swan-neck spout, ivory handle and finial, by P. A. and W. Bateman, 1799, 17 oz 3 dwt 170 0
George IV teapot, compressed circular body, ivory handle and
finial, curved spout, by Eley and Fearn, 1823, 25 oz 16 dwt        150 0
William IV compressed circular teapot with moulded girdle, wood finial and similar wood handle, by E. E. J. and W. Barnard, 1830, 14 oz 2 dwt 135 0
Early Victorian bullet-shaped teapot with engraved body, Edinburgh, 1840, 24 oz 82 0
George III oval teapot stand, gadroon border on four panel
supports, but George Fenwick, Edinburgh, 1806, 5 oz 14 dwt 80 0
William IV small melon-shaped teapot, with slightly domed cover and ivory finial, scroll handle and curved spout, London, 1833, 13 oz 18 dwt 60 0
Tea and Coffee Services
Victorian tea and coffee service of compressed circular form, decorated with embossed flowers and foliate handles and on scrolled feet with shell motifs, by Rawlins and Sumner, London, 1838, 72 oz 600 0
George IV three-piece melon-shaped tea service with scroll handles and shell decorated panel supports, by E. E. J. and W. Barnard, London, 1829, 44 oz 7 dwt 500 0
George III circular three-piece tea service with curved lobes, gadroon rims and leaf decorated handles, on paw supports, the pot with rose finial, by John Angell, 1819, 41 oz 6 dwt 380 0
Victorian three-piece tea service of compressed circular form,
the plain ground richly chased, by I. J. Keith, London, 1840, 48 oz
Vinaigrettes—See Small Decorative Antiques Waiters
Pair of George III plain oval waiters each on four shell and beaded bracket feet, beaded rims, by John Scofield, London, 1777, 27 oz
George II plain shaped square waiter on four hoof feet, moulded border, by Thomas Farren, London, 1734, 6 oz 17 dwt
Early George II square waiter with raised border incurved at the angles, 1727, 3 oz 18 dwt
SHEFFIELD PLATE Candelabra and Candlesticks
Pair of candelabra, each for three lights, with reeded scrolling arms, gadroon bordered knops, detachable nozzles and circular bases, 17i in high to centres
Pair of three-light candelabra, the tapering vase stems, circular bases and campana-shaped sconces decorated with chased borders, each fitted with two detachable scrolling branches, one converting to form a

five-light and bearing flame finial, 20 in high
Pair of table candlesticks with V-shaped stems, gadroon shoulders, circular bases and detachable nozzles, llj in high
Pair of table candlesticks with circular bases, vase-shaped stems and gadroon borders, detachable nozzles, 11 in high
Coffee Pots
Vase-shaped coffee pot on pedestal foot with reeded borders, ball finial and wood handle, 13 in high
An oval coffee pot on pedestal base, with reeded shoulder, gadroon borders and angular wood handle, 9] in high
Urn-shaped coffee pot, body semi-lobed between ribbed panels, on pedestal base, ball finial and wood handle, 27 in high
Coasters—Wine
Four circular wine coasters with lobed sides below gadroon lips, the wood bases centred by crested bosses, 5J in diameter
Pair of circular coasters with beaded and ovolo rims, wood bases, 6 in diameter
Caddies—Tea
Two caddies of bombd form embossed with shell motifs Serpentined caddy with hinged lid and beaded borders
Dishes
Set of four entree dishes and covers on heater bases, oblong with scrolling foliate borders, 14 in wide over handles
Pair of entree dishes and covers with gadroon borders and
detachable foliate handles, 11 in wide 22 0
A rectangular entree dish and cover complete with liner, gadroon and leaf borders, wood end handles, on four supports, 141 in wide 20 0
Teapots
An oblong teapot, body semi-Iobed between gadrooned borders, short spout, ivory finial and angular wooden handles, 5J in high 25 0
A compressed circular teapot engraved with swirling leafage,
fruit finial and scroll handle, 5J in high 18 0
Tea and Coffee Services
Oval three-piece coffee service with vase-shaped pot, oval jug and basin decorated with bands of sprays and foliage, 10 in high the pot 160 0
Three-piece tea set with compressed circular bodies, fluted,
foliate collars, scroll handles and foliate panel supports 38 0
Tea Trays
Oblong two-handled tray, engraved with armorials within a chased surround of scrolls and floral sprays, gadroon border, 30 in wide 220 0
An oblong tray, gadroon bordered and reeded end handles
springing from chased foliage, 28 in wide 95 0
Tea Urns
An inverted compressed pear-shaped urn, the body engraved
with a crest, foliate handles and flower finial, 16 in high 75 0
An oviform urn with an applied plain shield, the cover with vase finial, reeded loop handles, on square base with ball feet, 221 in high 45 0
Tureens
Large shaped oval sauce tureen on four feet below heavily
chased floral motifs, detachable liner, 16J in wide 230 0
Pair of oval sauce tureens and domed covers with gadrooned rims, decorated with acorns and oak leaves at the handles, 8Ј in wide (end handles missing from one tureen) 120 0
Wine Coolers
Set of four coolers, the campana-shaped bodies engraved with contemporary armorials above lobing reeded handles and gadroon borders, on pedestal bases, 9i in high 520 0
Pair of coolers with campana-shaped bodies, reeded handles and
on pedestal bases, 9J in high 200 0
NON-PRECIOUS METALS
Brass
Pair of eighteenth-century andirons, with spherical finials, and
masks, 29 in high 100 0
SOME AUCTION ROOM PRICES ! 1968-69
A club fender
A Corinthian column floor standard
An embossed fire kerb
A two-handled log tub on paw feet
An alms dish with lobed centre and inscription border, the rim
with punched rosettes, 15} in diameter Pair of spirally-turned candlesticks on domed feet, 20J in high A hanging oil lamp Pair of chambersticks, with snuffers A heavy log tub with lion mask handles on paw feet Brass

and steel semi-circular fender
An oval fire insurance plate with a crest of a stag, dated 1774 Pair of carriage lamps A helmet coal-scuttle
A warming-pan with turned wood handle Pair of baluster candlesticks, 9 in high
Bronze
Figure of a racehorse and jockey after Isadore Bonhcur, I0j in
high
The Capture of Alexander by G. Halse. Two warriors hold a
struggling youth. Signed and dated 1860, 24 in high Eighteenth-century Italian figure The Dying Gladiator signed
Canova
Figure of a dancing fawn, holding up a bunch of grapes and
balanced on his left foot, 14 in high Figure of an infant satyr playing a set of pipes, 9j in high Pair of busts of Henry IV and Sully, three-quarter length, both
wearing ruffs and decorations, on rouge marble socles, 20} in
high
Pair of Art Nouveau winged figures stamped A. Moreau, 9J in
high
Pair of five-light candelabra on bulbous stems Italian figure of Venus, 7 in high
Copper
Early nineteenth-century tea urn on a square base
A street lamp
Three large saucepans (one with lid) Two coal scuttles A large kettle
Coal helmet with swing handle
Large two-handled urn and cover
A copper and brass tea urn with tap
A long turned wooden-handled warming-pan
Iron and Steel
Steel and brass basket grate with pierced frieze and baluster
uprights, 20 in wide Seventeenth-century Sussex wrought-iron fireback, 2 ft 10 in
by 1 ft 8 in and a log fork Wrought-iron shaped fire-back Regency iron and brass stick stand on paw feet
Victorian cast-iron corner stick stand 5 10
Victorian cast-iron oil heater 3 10
Pewter
A charger with secondary touch of Thomas Lanyon, circa 1730,
20 in diameter 36 0
Five quart tankards 35 0
A four-branch candelabrum, 24 in high 22 0
Eighteenth-century circular charger, 20 in diameter 22 0 Pair of altar candlesticks, baluster-shaped stems on triangular
bases, 20 in high 16 0
Pair of baluster and cup candlesticks, 18 in high 15 0
A hot-water meat dish with two handles and a grill, 22 in wide 15 0
A travelling chamber-pot, stamped Jas. Dixon 14 0
Two tankards and a mug 6 0

CLOCKS, WATCHES AND BAROMETERS Bracket Clocks
Repeater clock by Edwardus East with signed and engraved
backplatc in cboniscd case 600 0
A three-train musical clock by Moore of Ipswich with eight tunes in ebony case with gilt metal mounts in mid-eightccnth-century style, 2 ft 2 in high 440 0
George III fruitwood clock by Recordon, late Emery, London, with painted dial and frets at side and front of case, 1 ft 2 in high 290 0
George III walnut clock, the dial signed Joseph Smith, Chester,
and of pronounced Continental character, 1 ft 6 in high 210 0
George III ebonised clock, the 7-in dial signed William Smith, with calendar and strike/silent dial. The movement is contained in an inverted bell-topped case, 1 ft 4 in high 190 0
Louis XV contra-boullc clock with enamel dial signed Darmezin, Paris, and movement signed Crepaux, Paris, in cartouche-shaped case, 3 ft 1 in high 190 0
Louis XV Boulle clock by Pcrrache, Paris, with an enamelled dial, the case surmounted by a youthful figure of Jove, richly mounted in ormolu, 2 ft 6 in high 170 0
George III mahogany clock by Massey, Bridge Road, Lambeth, the circular white-painted dial with a central calendar hand, 1 ft 4 in high 140 0
George III mahogany clock, the 7-in circular dial signed Lamb and Webb, London, with calendar and engraved backplate in bell-top case, 1 ft 4 in high 120 0
Mid-eighteenth-century veneered ebony clock signed John Small-wood, Lichfield, with pull quarter repeat, 1 ft 4 in high (later dial) 85 0
George III mahogany clock, the 8-in arched silvered dial signed Gravell and Tolkien, London, with engraved backplate and tic-tac escapement in broken arch-topped case, 1 ft 6 in high 60 0
Regency rosewood clock signed on dial John P. Smith, 1 ft 3 in
high 20 0
Carriage Clocks
Clock in gilt case by James McCabe, London 675 0
Repeating French brass clock with white dial signed Gibson
and Co Ltd, Belfast, 6J in high 68 0
French brass clock with white dial signed Rowel, Oxford, 4Ј in high
Repeating brass clock with white dial and glazed brass case, 5 in high
Gilt metal timepiece, the glazed case with pierced floral frets at the sides and front, 5 in high and with travelling case
Miniature silver-cased repeating clock with white dial. The case stamped J. Keller, 3J in high
Lantern Clocks
Brass clock with engraved copper dial and an alarm disk, 1 ft 1 in high
Late seventeenth-century brass clock, the dial engraved with flowers and with pierced dolphin cresting, 1 ft 3 in high
Longcase Clocks
Late seventeenth-century marquetry clock, the 11-in dial signed Robt. Williamson, London, with calendar aperture in a walnut case inlaid with shaped panels of birds and flowers, with a bullseye in the waist door and with spirally turned columns at the corners, 6 ft 7 in high (frieze of a later date)
Tall mahogany cased clock with chimes. The elaborately foliated brass dial with a silvered chaptered ring. The case inlaid with classic urns in coloured woods, the arched hood has brass spires and the waist has a bevelled glass door
A carved mahogany cased clock with a grotesque satyr mask to the hood over a brass floral scrolled dial. Westminster, Whittington and St Michael chimes, 7 ft 7 in
Mahogany clock made by Manley of Chatham
Eighteenth-century walnut clock with domed canopy and brass face, the movement by William Stapleton, London, 7 ft 4 in high
Walnut clock, the early eighteenth-century movement signed
Andr. Dunlop, London, the 12-in dial with chestnut and
flower spandrels, 7 ft 4 in high Georgian lacquer clock with brass face and striking movement.
The case, with ‘bullseye’ door, decorated with gilt chinoiseries
on a simulated tortoiseshell ground Eighteenth-century small clock by John Lee, Gookham; with
brass dial and foliated spandrels, in a black lacquer case
decorated with chinoiseries in red and gill
Mantel Clocks
An ormolu clock, the painted dial signed F. Linke, Paris, the movement in a glazed case in well chiselled ormolu with drapery, acanthus leaves and groups of fruit and ending in double cloven-hoof feet, 2 ft 11 in high
Bronze and ormolu mounted clock, the movement contained in a drum upon which is seated a Chinaman holding a parasol, the whole on the back of an elephant, 1 ft 4 in high
A French clock, inscribed Bonniere a Clermont, in a rococo porcelain case. The blue and gilt ground painted with musicians, lovers and flowers. On a similar stand
Louis XVI marble and ormolu clock, the striking movement with enamel dial signed Hessen. The arched architectural case with drapery festoon, pineapple finials, an urn and fluted columns, 1 ft 5 in high 110 0
Regency rosewood clock, the movement by Dwerrihouse &
Carter, Davies Street, 2 ft high 70 0
Philippe clock with glass panels in gilt metal case with corinthian columns and surmounted by an urn. Decorated with coloured enamels, 18 in 68 0
An Empire marble clock mounted in ormolu, the movement with outside count-wheel, the dial surmounted by a white marble urn and suspended between fluted columns capped by ormolu pineapples, 1 ft 4 in high 55 0
Watches
Gentleman’s 18-carat gold half-hunter watch 20 0
Early nineteenth-century verge watch by D. Nevern, in a tor-
toiseshell case, the dial enamelled with a wharf-side scene 13 0
Gentlemen’s 18-carat gold pocket watch by George Harvey,
Wellington 13 0
George III verge watch by William Fowler, London, in a silver
case, London 1783 9 0
Nineteenth-century verge watch by Nicoll, Great Portland
Street, in a tortoiscshcll case 7 10
Barometers
Early   Victorian   mahogany  stick   barometer  by  E. Davis,
Shrewsbury, 3 ft 3 in high 70 0
Regency rosewood inlaid with mother-o’-pearl banjo barometer
and thermometer 46 0
George III mahogany banjo barometer and thermometer with engraved scales by A. M. Ortelli, Godalming, the case outlined with fruitwood lines, 3 ft 2 in high 38 0
Georgian mahogany stick barometer and thermometer by Rout-ledge, Carlisle 38 0
Mahogany stick barometer and thermometer by Salmon, Bath 38 0
A Regency rosewood banjo barometer and thermometer by
Aprile Sudbury 34 0
Early nineteenth-century mahogany banjo barometer by Lione and Tarone, London, with a thermometer and the case inlaid with Prince of Wales plumes and a whorl pattern, 3 ft 2 in high 30 0
Early nineteenth-century mahogany banjo barometer by A.
Celti, Reading, the case inlaid with shells, 3 ft 2 in high 22 0
SILVER
(Troy weight: 20 pennyweights [dwt] = 1 ounce [oz])
Baskets for Bread, Cakes, Fruit, Sugar or Sweetmeats George II oval-shaped cake basket on four cherub mask and scroll feet. The sides pierced and engraved with flowers and
scrolls and the base engraved with a coat-of-arms, by Paul
Crespin, 1753, 62 oz 3,600 0
George III oval pedestal cake basket by John Ernes, London,
1804, 24 oz 10 dwt 400 0
George III boat-shaped pedestal sugar basket with engraved border, reeded edge and swivel handle by Peter, Ann and William Bateman, London, 1793, 5 oz 10 dwt 320 0
Victorian oval basket, the pierced panels embossed with beading
and garlands, London, 1895, 19 oz 62 0
Candelabra and Candlesticks
Pair of George I dwarf table candlesticks, the baluster shafts upon square terraced bases by William Darkeratt, 4J in high, London, 1726, 20 oz 1,500 0
Victorian tabic candelabra with two tiers of six scrolled branches issuing from a bold Corinthian column supported on a square terraced foot, with neo-classic rams’ mask and husk swags by R.H. over R.H., London, 1877, 30 in high 355 0
Pair of George III table candlesticks, the tapering baluster shafts upon half-fluted circular bases by John Green & Co, Sheffield, 1800 195 0
George III chamber candlestick and snuffer, the gadrooned edge
witli shell motif by William Cafe, London, 1761, 12 oz 130 0
Casters
Garniture of three George II vase-shaped sugar casters of plain
design by John Delmester, London, 1758, 15 oz 10 dwt 930 0
William IV Scottish baluster caster engraved with a crest above floral decoration on a granulated ground, by Elder & Co, Edinburgh, 1832, 4 oz 7 dwt 90 0
George III baluster caster with pierced cover and wrythen
finial, by Thomas Satchwell, 1780, 2 oz 4 dwt 85 0
George III vase-shaped caster the otherwise plain body engraved with contemporary crest. The mark of George Giles struck over another, 1783, 2 oz 8 dwt 65 0
Coasters—Wine
Set of four partly fluted circular coasters with gadrooned rims and engraved with crests by John & Thomas Settle, Sheffield, 1818 410 0
Pair of George III coasters with pierced waved galleries, London, 1794 270 0
Pair of William IV circular-shaped wine coasters with foliate borders and crested silver bosses to the wood base, by Henry Wilkinson & Co, Sheffield, 1831 150 0
Pair of George III coasters with beaded rims, the pierced sides stamped with arcading, urns and laurel festoons, maker’s mark missing, 1794 100 0
Coffee Pots
George I small plain cylindrical coffee pot with octagonal spout and low domed cover with baluster finial, by Paul De Lamcrie, London, 1725, 11 oz 3 dwt 1,900 0
George II baluster coffee pot, plain with foliate decorated spout, wood handle and hinged domed lid, probable maker Fuller White, London, 1759, 21 oz 1,350 0
Late George III tapering cylindrical coffee pot, the plain body engraved with contemporary armorials and a crest, by Peter, Ann and William Bateman, London, 1802, 35 ox 2 dwt 1,200 0
George IV coffee pot, vase-shaped, with moulded bands at the neck and waist, leaf-capped scroll handle and foliate finial on lid, by Pearce & Burrowes, London, 1826, 22 oz 5 dwt 210 0
Victorian vase-shaped coffee pot engraved with key pattern
decoration, London, 1872, 24 oz 135 0
Cruets
George II five-bottle cruet frame on four shell feet with detachable baluster handle. Five cut-glass silver-mounted bottles. By Jabez Daniel, 1750, 28 oz 7 dwt 105 0
George III cruet frame for six bottles with reeded loop end handles, ring holders, on four feet. Five glass bottles all chipped, one broken. By Henry Chawner, London, 1792 16 0
Cups and Goblets
Elizabeth I secular wine goblet, the bowl decorated with tulips and strapwork motifs, on a slender baluster stem and circular fluted foot, London, 1593, 5 oz 10 dwt 2,000 0
Pair of George III goblets of plain design, probably by William
Sumner, London, 1800, 20 oz 520 0
Pair of George III two-handled pedestal challenge cups and covers with reeded decoration and urn knops, by Samuel Hcnnell, London, 1806, 32 oz 5 dwt 400 0
George III tumbler cup engraved with armorials, gilt interior and the base with contemporary initials. Possibly by John Garter, London, 1766, 2 oz 1 dwt 150 0
Victorian wine cup, the beaker-shaped bowl and pedestal base cast and chased in low relief with grape-laden vine tendrils, by Hunt and Roskell, London, 1875, 10 oz 1 dwt 52 0
Cutlery—Canteens
George III fiddle thread pattern table silver: 24 tablespoons, 36 table forks, 12 dessert spoons, 12 dessert forks, 12 teaspoons, 6 sauce ladles, 2 soup ladles, 1 marrow scoop, majority by Richard Crossley, 1798/1800/1804, 146 oz 9 dwt 750 0
Victorian fiddle pattern table silver: 12 tablespoons, 12 table forks, 12 dessert spoons, 12 dessert forks, 6 teaspoons, 2 salt spoons, by George Angell, London, 1863, 116 oz 14 dwt 260 0
Cutlery—Forks Dessert
Twelve George I  three-pronged  forks with crest, different
makers, 1718, 14 oz 1 dwt 1,500 0
Twelve George IV fiddle pattern forks by James Scott, Dublin,
1822, 15 oz 75 0
Six George III fiddle pattern forks by G.D., London, 1794,
8 oz 14 dwt 65 0
SOME AUCTION ROOM PRICES ! 1968-69
Cutlery—Forks Table
Twelve Queen Anne three-pronged forks engraved with a crest,
by David King, Dublin, 1708/10, 28 oz Four George II three-pronged forks engraved with two crests,
1755, 7 oz 18 dwt Eleven Victorian fiddle shell pattern forks by George Angell,
1857/61, 36 oz 16 dwt
Cutlery—Forks Toasting
George III fork with knopped shaft and scrolled handle, probably by R. Preston, London, circa 1767, 7 oz 10 dwt. 17f in long
George III fork with knopped shaft and scrolled handle by John Deacon, London, circa 1775, 8 oz. 19i in long
Cutlery—Knives
Forty-eight Victorian table knives and twenty-four dessert knives, kings pattern, steel blades by J.A. or T.S., 1884
Twelve eighteenth-century dessert knives, the multi-faceted bloodstone handles with knopped urn finials and mounts engraved, the scimitar blades of steel. Circa 1700, (Some handles cracked)
Cutlery—Ladles
Four George III sauce ladles, crested Old English pattern by
Hester Bateman, 1783, 5 oz 19 dwt Pair of George III sauce ladles with ribbed and punched beaded
bowls, by Michael Keating, Dublin, circa 1780, 2 oz 16 dwt
Cutlery—Spoons Dessert
Nine engraved spoons, seven by William Soame, 1741, two 1748, 12 oz
Ten Hanoverian spoons engraved with crest, 1760, 11 oz 5 dwt Cutlery—Spoons Serving
Pair of George III Old English pattern spoons by Steven Adams,
London, 1772, 5 oz 15 dwt Pair of Victorian spoons by George Angell, 1854, 10 oz 14 dwt
Cutlery—Spoons Table
Six George I Hanoverian pattern spoons with rat-tail bowls
by Charles Jackson, 1723, 11 oz 2 dwt Six George III Old English pattern spoons with contemporary
initials J.G. by Hester Bateman, 1780, 11 oz 17 dwt
Cutlery—Spoons Tea and Coffee
Six William IV ‘bright-cut’ spoons, 1836, 3 oz 7 dwt Eight George IV fiddle shell pattern spoons by J. McKay, Edinburgh, 1827, 4 oz 8 dwt

Globes
Pair of early nineteenth-century mahogany library globes by Newton, published in 1838 and 1836. The tripod frames with out-scrolled legs ending in brass castors, 3 ft 8 in high        780 0
Large pair of terrestrial and celestial globes by Newton; published 25 March 1875. Supported in mahogany frames on triple curving legs 205 0
Pair of terrestrial and celestial globes in turned stands by James
Wyld, Charing Cross East; published 1847 185 0
Knife Boxes
A pair of mahogany urn-shaped knife boxes, stamped W. Johnston, with domed lids and bodies inlaid with flowers and stripes, 2 ft 5 in high 115 0
Sheraton  inlaid  mahogany serpentine-fronted knife box in
original condition 32 0
Mirrors—Mantel
Empire-style giltwood overmantel with triple mirrored panels
and decorated with classical figures 105 0
Rectangular mantel mirror in a giltwood frame carved with
acanthus and shell motifs, 31 in by 25 in 60 0
Mirrors—Toilet or Dressing
Sheraton serpentine-fronted box-frame toilet mirror fitted with
two drawers, 17 in wide 36 0
Sheraton box-frame shield-shape toilet mirror with two drawers,
18 in wide 30 0
Mahogany box-frame toilet mirror with three drawers, 15 in
wide 15 0
Edwardian   mahogany   box-frame   toilet  mirror   with three
drawers to base, 22 in wide 9 0
Mirrors—Wall
Pair of Chinese-Chippendale giltwood girandoles of rococo outline mounted with phoenix-birds and clusters of flowers from which issue two scrolled candle branches. The base enriched with acorns and oak leaves, 38

in high 650 0
Mid-Georgian wall glass in a giltwood frame carved with scrolls
and foliage and pierced, 44 in high 200 0
Chippendale mahogany mirror with gilt gesso beading
George IV convex mirror in a gilt frame enriched with spherical ornament with two scrolled candle sconces. Crested with a gilt eagle with outspread wings 76 0
Regency giltwood convex mirror with ball encrusted moulded
frame and ebonised slip, 1 ft 11 in diameter 15 0
Settees, Couches and Chaise Longues
Small carved mahogany sofa, the arched back carved with
rococo motifs. Curved arms, carved seat rail and cabriole legs        135 0
some auction room prices ‘. 1968-69
Decorated satinwood cane-panelled settee with loose seat
cushion, 4 ft 4 in George III painted settee with flat rectangular back and arms,
on turned legs. The arms, seat rails and legs are painted
with husks and flowers on a cream ground, 6 ft wide Early George III mahogany settee with stuffed back and arms.
The seat rail and legs are carved with blind fret, 5 ft 8 in
wide, (some restoration) Victorian rosewood frame serpentine-fronted chaise longue on
short cabriole legs
Settles
Eighteenth-century oak settle, 5 ft 5 in wide Seventeenth-century panelled oak settle with box seat, 4 ft 6 in wide
Seventeenth-century carved and panelled tall-back hall settle, 5 ft 7 in wide
Sideboards
Small nineteenth-century sideboard inlaid with ebony lines. Raised back, the centre drawer flanked by a cupboard and deep drawer. Supported on six turned and tapering legs, 4 ft 8 in wide
Hepplewhite-style mahogany serpentine sideboard of rich mellow colour, cross-banded in kingwood and fitted with a napery drawer and cellaret cupboards with octagonal gilt metal handles and supported on chamfered

legs, 7 ft 2 in wide
Georgian mahogany half-moon sideboard with two cupboards to the sides and two drawers with lion ring handles in the centre. Four tapering legs, 4 ft wide
Large mahogany Sheraton-style sideboard fitted with two long drawers and flanked by two deep drawers, supported on tapering legs
Regency Empire mahogany sideboard of architectural form, with a reverse breakfront with two shallow drawers to the centre flanked by deep cupboards. Supported by two curved and four simulated bamboo legs

terminating in brass paw feet. The whole mounted with ormolu and brass griffins, lions’ masks and sphinx and with Adams-style garlands and patera, 7 ft 6 in long
Late Georgian mahogany sideboard with shaped front, the top back rail fitted with three tambour slides. Two cupboards and a centre drawer to the base over a waved apron. Supported on six slender tapering legs, 5 ft

7 in wide
Early nineteenth-century mahogany bow-front sideboard on spiral-turned legs, 6 ft 1 in wide
Tables—Break fast
Regency mahogany breakfast table with brass stringing on the banded top and a turned pillar ending in a reeded quadruped, 5 ft by 3 ft 5 in
Georgian mahogany oval breakfast table with reeded edge and
Tables—Card
Chippendale mahogany card table with shaped folding top on boldly carved cabriole legs ending in claw and ball feet, 2 ft 7 in wide 370 0
Late George II mahogany card table with border of carved flowerheads and legs and frieze carved with blind fret, 3 ft wide 250 0
Regency card table in figured rosewood inlaid with brass flowers and leaves, the D-top on a ringed stem and quadruple brass capped legs, 3 ft wide 190 0
Sheraton mahogany card table inlaid with satinwood lines and
on tapering legs, 3 ft 2 in wide 180 0
George II walnut card table with rectangular top on turned legs
with mantled knees and club feet, 3 ft wide 95 0
Regency mahogany card table with green baize interior on curving quadruple support, ending in brass claw feet. The top is cross-banded 65 0
Victorian mahogany card table with double Sap top supported
on four tapering shafts, terminating in curved legs 44 0
Tables—Centre
Regency painted centre tabic, the circular top simulating green marble, the border with brass mouldings hinged to a carved turned central support on a curved triangular base with lion’s paw feet, 4 ft diameter 120 0
Edwards and Roberts eboniscd centre table with ormolu beading on cluster column and quadruple base, 5 ft 6 in wide 38 0
Red Buhl shaped centre table with heavy ormolu mounts, two
drawers and on cabriole legs. (Poor condition) 11 0
Tables—Dining
Charles I oak dining table with a triple-plank top and the frieze carved with leaves and interlaced arcading, on column legs, 6 ft 5 in long by 2 ft 7 in wide 360 0
Large late George III mahogany dining table, the top richly carved with acanthus, ribbon motifs, satyr masks and a coat of arms. Supported on ten tapering spiral-twist legs with five loose leaves, 12 ft 4 in long 185 0
Georgian mahogany two pillar dining table with triple curving
legs ending in brass-capped feet 122 0
Georgian mahogany oval drop-leaf dining table on turned legs
and pad feet 75 0
Eighteenth-century mahogany oval drop-leaf cottage dining table
on taper legs with pad feet, 3 ft 6 in wide 44 0
Mahogany gadrooned oval dining table with cabriole legs and
claw and ball feet 40 0
Georgian mahogany drum library table with leather top and four real and four dummy drawers. On triple curving legs with brass-capped feet, 3 ft 3 in diameter 680 0
some auction room prices : 1968-69
George III mahogany library table fitted with seven drawers and dummy drawers with gilt metal lion ring handles, the top with gilt tooled green leather and the whole raised on a curved quadruple support with

brass-capped feet
Tables—Games and Sewing
Eighteenth-century mahogany, shaped folding top, games table on nutcracker frame with cabriole legs and claw and ball feet, 34 in wide
William IV games table with sliding and reversible top inlaid as a chess board opening to reveal a backgammon board with two drawers to the side. Central pillar supported on quadruple curving feet
Nineteenth-century mahogany sewing table with rising top and drawers below. The slender tapering legs ending in brass-capped feet
Tables—Gate-leg
George I elmwood gate-leg table, the oval top with flaps on
cabriole legs carved with scrolls and leaves and ending in
pointed pad feet, 3 ft 9 in wide Seventeenth-century oak oval gate-leg dining table with double
flaps supported on bobbin turned legs with plain cross
stretchers, 4 ft 9 in wide Late George II mahogany gate-leg table, the oval top with two
flaps, on unusual legs fluted and ending in paw feet, 3 ft 9 in
wide
Oak oval gate-leg table on turned underframe with drawer, 4 ft wide
Tables—Occasional
Late George II mahogany piecrust table with bird-cage support on fluted stem with carved legs and claw and ball feet, 2 ft 2 in diameter
Large mahogany piecrust tripod table with baluster stem and
pointed pad feet, 3 ft 5 in diameter Mahogany tripod table, the circular top with raised rim, on
cabriole feet, 1 ft 10 in diameter
Tables—Pembroke
Late Georgian mahogany oval Pembroke table with drawer, on
square tapering legs, 2 ft 7 in wide by 3 ft 6 in long Late Georgian mahogany Pembroke table painted with a floral
border and on turned and fluted legs Georgian mahogany Pembroke table with folding flaps and
single drawer, inlaid with satinwood lines and fan motifs, on
tapering legs, 3 ft 2 in wide
Tables—Refectory
Seventeenth-century oak refectory table of slender plain form, the base having square ends united by a single stretcher, 7 ft 3 in long
Oak refectory table on bulbous end supports with central
stretcher, 7 ft 7 in by 3 ft wide 130 0
An exceptionally long oak refectory table with triple curving
supports, 18 ft 6 in long, 3 ft 3 in wide 90 0
Tables—Side
Queen Anne banded walnut side table with two deep and two
shallow drawers on square legs, 3 ft 3 in wide 170 0
Chinese-Chippendale mahogany side table, the frieze carved with
blind fret. Moulded legs, 3 ft wide 88 0
Oak side table with drawer, on turned legs, 3 ft wide 64 0
Walnutwood side table with cabriole legs carved with acanthus
leaves 31 0
Tables—Sofa
George III satinwood sofa table cross-banded with acacia, fitted with two drawers and false drawers opposite on trestle supports with splayed curved feet and brass castors, 2 ft 10 in wide        750 0
Regency banded mahogany sofa table with tulipwood stringing with two drawers on end supports and central stretcher with brass claw feet, 5 ft 10 in extended 380 0
Late George III mahogany sofa table with two drawers in frieze and raised on flat trestle supports with out-curved legs, 3 ft 2 in wide 270 0
George III mahogany sofa table banded in rosewood and with two drawers. It has trestle supports with tripod splayed legs and brass feet, 3 ft wide 250 0
Tables—Sutherland
Mahogany Sutherland table on turned underframe, 2 ft 9 in
wide 42 0
Victorian walnut-veneered Sutherland table on turned supports,
2 ft 6 in wide 36 0
Tables—Tea
Regency mahogany tea table with folding top on a turned pillar and four curved legs, the whole inlaid with brass stringing, 3 ft wide 120 0
Late George II mahogany tea table, the top with a border of flowerheads and ribbon and the frieze and chamfered legs carved with Chinese blind fret, 3 ft wide 60 0
George III mahogany tea table with folding top, a drawer in
the frieze and square tapering legs, 3 ft 8 in wide 38 0
Tables—Wine
Hepplewhite mahogany wine table, the inlaid octagonal top
supported on triple concave curving legs 105 0
Victorian mahogany wine table on pillar and tripod base, 21 in
diameter 10 0
Tables—Writing
George III mahogany pedestal writing table, the gilt tooled leather top with three drawers at each side of the frieze and
the pedestals with cupboards and drawers at either end, 4 ft wide
Early eighteenth-century banded fruitwood writing table, fitted
with three drawers, a shaped apron and on cabriole legs with
pad feet, 2 ft 4 in wide Victorian lady’s mahogany writing table with two short drawers
on lyre end supports, 3 ft wide Carved mahogany writing table with fitted drawer, the top lined
with leather, on cabriole legs, 2 ft 5 in wide
Tallboys and Lowboys
George II walnut tallboy, the top with reeded and canted corners and three small and three long drawers. The base having three long drawers and bracket feet
Queen Anne small walnut tallboy of mellow colour, the upper chest fitted with two small and three long drawers over a brushing slide, and three long graduated drawers
William and Mary lowboy inlaid with scrolls and motifs. The top fitted with two small and two long drawers and two long drawers to the base, 4 ft 3 in high
Georgian mahogany tallboy with dentil cornice and two small and three long drawers to the top and tliree long drawers to the base which is supported on bracket feet
Georgian mahogany tallboy with dentil cornice, the top fitted with two small and three long drawers, the base with three long drawers and supported on bracket feet, 6 ft 1 in high
Waiters
Mid-Georgian mahogany dumb waiter with turned and carved columns supporting three trays. The whole on cabriole tripod feet, 4 ft high
George III mahogany dumb waiter with two revolving tiers and baluster centre on three curved and moulded legs and castor feet applied with roundels, 3 ft 2 in high
George II mahogany dumb waiter with three graduated revolving tiers and spiral fluting on turned central support. Plain cabriole legs, 3 ft 6 in high
Wardrobes
Mahogany breakfront wardrobe fitted with sliding trays, four
drawers and panelled cupboards Small Georgian mahogany wardrobe enclosed by two panelled
doors with three drawers in the base, 3 ft 9 in wide George III mahogany gents wardrobe with pierced swan-neck
cresting, a pair of doors banded in satinwood and two short
and two long drawers below, 7 ft high by 4 ft 4 in wide Regency mahogany wardrobe the upper part with sliding trays
with four drawers under on splay feet, 3 ft 11 in wide
Washstands
Late George III mahogany washstand, the top hinged and opening to form a back, the front with a pair of cupboard doors above one small drawer, on square splayed legs, 2 ft wide
Edwardian three-tier corner washstand with basin 18 0 George III mahogany corner washstand, the slender legs joined
by a stretcher with a drawer, 2 ft wide                                      14 0
Wine Coolers
Georgian inlaid mahogany sarcophagus wine cooler with lion
mask and ring handle on paw feet 65 0
Georgian mahogany octagonal wine cooler with lifting top and
short square moulded legs, 18 in wide 55 0

The Regency style of cutting can be
regarded as the classical standard of
British cut glass. It was not long to survive,
however, for in the new designs of 1825-30
there was a change from mitre-cutting to
flat-cutting or surface slicing in a vertical
pattern, as opposed to the horizontal
patterns of previous years. Horizontal
bands of diamonds were replaced as
decoration by a vertical arrangement of
broad hollow flutes, ‘pillared’ flutes, or flat
vertical facets. The essentials of this new
style can be seen in the pattern drawings
of about 1830 of Samuel Miller, foreman
cutter at the Watcrford glass-works in
Ireland. The style may have started in the
cutting shops of Birmingham. Apsley
Pellatt at the Falcon Glasshouse in South-
wark, London, was producing vessels with
vertical arrangements of fine diamond
panels about 1820. The decanter illus-
trated shows pillar-cutting of about the
toco’s.
The broad-fluted style of cutting was
international, with overtones of the early
18th century, and was especially associated
with the Budermeter glass of Central
Europe. About the same time as this style
of cutting appeared in England, the shape
of glass became more angular and straight-
sided, which was suitable for the new form
of decoration. Decanters, particularly,
changed from the barrel shape to a
cylindrical shape with vertical sides. This
remained the characteristic style of the
1830’s and the early 1840’s. Some elabora-
tion on the style took place on the better
pieces so that flutes would have multiple
profiles and would alternate with panels of
mitre-cutting. Arched patterns became
fashionable around 1840; often complex
in detail, they still retained the strongly
vertical tendency of style. The decanter
illustrated is a good example of the arched
decoration of the 1840’s, with mitre-
cutting enclosed by the arches.
CUT-GLASS DECANTER
By Apsley Pellatl, England, 1851
Ht. 311 mm (12-25 11,1
During the 1830’sand 1840’s glass-makers
in England began to appreciate once more
the curves and rounded shapes one could
attain with glass. Water carafes and
decanters began to have spherical bodies,
and champagne glasses with the new-
hemispherical bowl were introduced.
Wine-glasses now had ogee-shaped and
bill-shaped bowls, and cutting consisted
of plain facets running through from the
bowl to the stem. The spherical carafes and
decanters were often cut with ‘printies’ or
rows of large shallow facets. The decanter
illustrated, made by Apsley Pellatt in
London in 1851, has these rounded
hollows on the body of the vessel. Occas-
ionally heavy mitrc-cutting was used, but
the tendency was to decorate these boldly
curving shapes with engraving as opposed
to cutting. The period of common use for
these shapes in England coincided with the
eclipse of the technique of cutting in the
1860’s and 1870’s.
CUT-GLASS DECANTER
England, about 1850. lit. 381 mm (15 in.)
The Glass Excise in England was removed,
after much agitation, in 1845. Glass could
now be made to any thickness without fear
of taxation. One result was a revival in
interest in deep mitre-cutting, where the
glass was thicker and the cutting deeper
than ever before. The decanter illustrated
is a good example of this. Large-scale
mitre-cutting was to be a feature of this
mid-ioth century work. Intricate curvi-
linear designs became more common, and
the actual shapes of the vessels were freer
and had more variety. Contemporary
engravings illustrated much of the intri-
cately cut glass on display at the Great
Exhibition of 1851. Objects that have
survived to the present day show that the
glasses were not quite the ‘prickly mon-
strosities’ they appeared to be in 19th-
century engravings. Mention should be
made of the firm of F. & C. Osier of
Birmingham, who produced enormous
cut-glass centrepieces for this and other
exhibitions, and for eastern potentates
CUT-GLASS BOWL.
Decorated by E. Hammond, Stevens & Williams,
England, about 1895. Diam. 419 mm (16-5 in.)
After the 1851 Exhibition, cut glass was
largely disregarded for many years in
England. During the later 1850’s, 1860’s
and 1870’s, spherical vessels with en-
graved decoration were the fashion. Some
cut glass was always made in this period,
but without any great originality of
thought so far as the design was concerned.
Pressed glass imitations of cut glass also
spurred the reaction against real cut glass.
The intellectual set were against it on
aesthetic grounds from the middle of the
century. In John Ruskin’s words ‘all cut
glass is barbaric’ (Stones of Venice Vol. II
(1853)). Glass fashions at this period were
more or less international, so the eclipse of
cut glass also took place in Central Europe,
France and the U.S.A. at the same time.
However, it came internationally to the
fore again in the 1880’s and 1890’s. In the
pattern books of British manufacturers for
that period the new designs show cutting
as elaborate as was technically possible.
CUT-GLASS BASKET
Stevens & Williams, England, about 1880
Ht. 175 mm (688 in.)
Glass-cutters in England in the 1880’s and
1890’s aimed at a mathematical precision
in their work. Technical improvements
helped them to achieve this, so that even
shapes that were difficult to decorate with
cutting, such as the cut-glass basket
illustrated, became a commercial proposi-
tion. Cut-glass objects that aspired to lesser
heights were square-section toilet bottles
and whisky decanters with ball stoppers,
which were decorated all over with dia-
mond mitre-cutting. Cut glass was looked
upon as the ‘old legitimate trade’ by glass-
makers, and tended to a conservatism in
design, yet the variety of new shapes in
these years was in line with the freedom
of the fancy-coloured glassware that was
being produced, This decoration became
once more the symbol of social and
material success, and was much patronised
by the middle and upper classes. Pressed
glass imitations were no longer the threat
they had been.
DECANTER IN CLEAR COLOURLESS GLASS WITH CUT
DECORATION
Bakewell, Page & Bakewell, Piltsburgh, U.S.A., 1825
The earliest known specimens of American
cut glass date from 1824, although evi-
dence does exist to indicate that cutting
may have been practised even earlier than
this date. Motifs that were used exten-
sively were flutes, panels, stars and plain
geometric bands. The cut decoration was
hand-polished on wooden wheels, which
gave it a softer lustre than that given by the
later high-speed wheel polishing or acid
bath. North American glass factories that
produced cut glass in the early 19th
century were the Bakewell (Company of
Pittsburgh, the New England Glass Com-
pany, and the Boston and Sandwich Glass
Company. By 1830, the American glass
factories were producing enough glass to
encourage the government to stop foreign
imports, and in that year a high Federal
tariff was levied against imports from
Europe. The Baldwin Bill severely limited
imports, resulting in a boom in the
American glass industry.
COVERED VASE IN CLEAR COLOURLESS GLASS WITH RED
FLASHING AND CUT DECORATION
Probably the New England Glass Company, U.S.A.,
about 1845. Ht. 756 mm (2975 in.)
The new tariff laws of 1830 made the
manufacture of fine tableware in America
especially profitable, and by 1840 at least
81 glass-houses were in operation. In West
Virginia, in 1864, a new glass metal was
developed. Instead of the expensive and
brilliant lead glass, a less costly soda-lime
glass was developed, which although it did
not have the ring or rich appearance of lead
glass, was admirably suited to the great
variety demanded by the American public.
With the introduction of this new metal,
American cut glass was even more threat-
ened by cheaper pressed glass imitations.
Cut glass manufacturers were driven to
using the pressed techniques, or else to
producing cut-glass items that could not
be duplicated on the pressing machine. In
this middle period of American glass-
making (1830-80) cutting continued the
use of the flute, cross-hatching, fan, and
diamond motifs, though with a greater
profusion than in the earlier period. All the
glass, however, subordinated decoration
to the shape of the glass.
SEGMENT OE PI-ATE IN CLEAR COLOURLESS GLASS
WITH CUT DECORATION
T. G. Hawkes& Co., U.S.A.
The ‘brilliant’ period of American glass-
making (c. 1880-1915) was so called be-
cause of the fashion for brilliant cut glass,
which became a symbol of social prestige,
its opulence admirably suited to the
formality of the age. The deep-cut patterns
favoured motifs such as the mitre, the fan,
the notched prism, the single star and the
‘hob-star’. A very brilliant lead glass was
used which, in conjunction with the deep
cutting, produced an effect of extreme
richness and crackling brightness which
has to be seen to be fully appreciated. From
the beginning the glass-cutters tended to
cover most of the’surface of the piece with
their decoration. After the turn of the
century the embellishment became even
more elaborate, and the many firms vied
with each other in creating complicated
patterns, completely subjugating form to
ornament. Social and economic factors led
to the manufacturers pricing themselves
out of existence after World War I.
VASE WITH CUT DECORATION IN BLUE-GREEN GLASS
CASED WITH COLOURLESS GLASS
Use Schargc-Ncbel, Germany, 1064
Ht. 208 mm (82 in.)
The heavy, clear colourless glass that was
created in the Bohemian-Silesian area in
the late 17th century provided the stimulus
for a spectacular development in the art of
cutting as well as engraving. Glass so
decorated was soon being produced in all
the German-speaking countries, and by
the 18th century was being exported all
over the world. In the 19th century the
Bohemian factories adopted the English
style of heavy cutting with great success,
and even today cut wares form a large part
of their export wares. Bohemia has pro-
vided the finest cutters and engravers for
countries which have a less firm tradition
in glass-making. Modern German glass
shows the same quest for simplicity which
is noticeable in Finland, Sweden and
Denmark, and the glass-makers have
returned to the basic qualities of glass and
glass-blowing. This is reflected in the
simple lines and sensitive cutting of the
vase illustrated. It is in bluish-green glass
with a clear, colourless casing, the cut
decoration forming a window-like pattern.
VASE WITH  DECORATION
By Pavel lllava, Czechoslovakia, 1959
A fresh stylistic impulse reached the glass
factories of Bohemia in the first decade of
the twentieth century, which was to change
their traditional attitudes to decoration.
The impulse came from Vienna, where the
architect and designer Josef Hoffmann
(born 1870) had become a powerful influ-
ence. He was an early pioneer of a Func-
tionalist style in decoration and advocated
the use of basic geometric figures like the
square and circle for designs. Through his
work at the Wiener Kunstgewerbeschule
(Viennese School for Applied Arts) where
he taught, he popularised heavy, angular
forms. His style of purely geometric
ornament was transmitted to the Bohemian
glass industry by way of the schools for
glass-making and decoration in Haida and
Steinschonau. After the political revolu-
tion in 1948 the tradition for Bohemian cut
crystal continued, though softer patterns
were favoured over the old rigid cut-glass
designs. Pavel Hlava (born 1924) is best
known for his cut and engraved glass.
The Techniques of Taking Away
DISH WITH FACET-CUTTING AND ‘DIAMOND-POINT-
ENGRAVING
Germany (exported from Egypt ?), 2nd century A.D.
Ht. 6t mm (25 in.)
Dxamnnd-Potnl Engraving: Kngraving
glass with a diamond point was a technique
practised in Italy from before the middle
of the 16th century. Centuries earlier than
this, during the period of the Roman
Empire, engraving in the same style was
being produced. Some sharp instrument
not unlike a diamond point must have been
used; the results arc rather rougher, but
the similarities in technique cannot be
denied. ‘The first instance of this type of
engraved bowl was found in a grave of the
late 1st century A.D. on Siphnos in the
Aegean. However, it is not until the later
2nd century A.D. that a school of such
work can be recognised. The pieces are
colourless, clear glass bowls bearing myth-
ological and genre scenes in facet-cutting
with ‘diamond-point’ engraving for the
details. Many of the bowls have Greek
inscriptions giving the names of the
persons depicted, and all have a curvilinear
engraved band, usually just below the rim.
SEGMENT OE PLATE ENGRAVED IN DIAMOND-POINT
Willi GILDED AND FILIGREE DECORATION
Venice, mid-ihthcentury, Diam. 275 mm(10s in.)
Venetian cristallo glass, with its brittle
soda-lime constitution, was particularly
suited to the technique of diamond-point
engraving. When the diamond point was
pressed against the glass, this took the
impress with precision, yet still allowed
much treedom of movement to the en-
graver. However, although the technique
was practised in Italy, it was never as
popular there as on the glass of Venetian
type (Jacon de Vemse) found in other
European countries, notably in Holland
and also Hall-in-the-Tyrol. The diamond-
point engraving was usually used in con-
junction with gilded decoration. Dishes
with fantastic birds and long-tailed mon-
sters, as in the dish illustrated, were
produced, as well as those with coiled
foliage and coats of arms. The dish shown
is in clear, colourless glass with granular
gilding and a filigree network, as well as
diamond-point engraving. Dragons, birds
confronting a mask and crossed Papal
Keys form part of the engraved decoration.
GOBI II WITH DIAMOND-POINT INGKWING
Attributed to Jacopo Verzelini, Km/land, 1581
iii 210 mm (8-ag in.)
A group ol diamond-point-engraved glas-
ses has commonly been attributed to
Jacopo Verzelini (1522-1606), a Venetian
who came to England from Antwerp in
1571. In 1575 he obtained a privilege from
Queen Elizabeth I for a period of twenty-
one years which gave him the sole right to
make glasses after the Venetian style in
England, and forbade the importation of
foreign glass. In 1592, when he was
seventy, he gave up glass-making and
retired to Downe in Kent, where he died
at the age of 84. All the glasses ascribed to
him are large goblets of various proportions
with hollow moulded or gadrooned knops
on the stems. The goblet illustrated is in
clear, colourless glass with a slight greenish
tinge and diamond-point engraving on the
straight-sided bowl. The engraving on
Verzelini glasses has been attributed to
Anthony de Lysle, an engraver of pewter
and glass who is thought to have come
from France.
BOUQUET  IN DARK BLUE GLASS ENGRAVED WITH
11II DIAMOND POINT AND GILDED
Hall-in-the-Tyrol,
Ht. 202 mm (7-95 in.)
Diamond-point engraving was a charac-
teristic form of decoration at an important
glass-house at Hall-in-the-Tyrol. This
was started in 1534 and flourished in the
third quarter of the 16th century. It was
under the direction of Sebastian Hoch-
stetter, an Augsburg merchant, and event-
ually came under the patronage of the
Archduke Ferdinand. The articles pro-
duced by this works were in blue, green,
and clear and colourless glass, with dia-
mond-point engraving and (often dam-
aged) lacquer painting and lacquer gilding.
In the last third of the 16th century most
European glass-making countries were
producing glasses similarly decorated and
diamond-point engraved. Scrolled arab-
esque foliage, borders of chain or guilloche
pattern, hatched ‘ladder-borders’, and
borders of single formal leaves or of crest-
ing are usually found on all these glasses.
Obviously, these could not all be the work
of the same hand, but more probably the
work of a craftsman from Hall and his
pupils.
‘ROYAL OAK GOBLET’, ENGRAVED IN DIAMOND POINT
England, 1663. Ht. 143 mm (5-63 in.)
Few glasses survive from the period when
the Duke of Buckingham (1628-87) to°k
over from Sir Robert Mansell the making
of fine glass in the Venetian style in
England. The most important glass to
survive is this goblet, engraved in diamond
point with a portrait of Charles II
surrounded by engraved oak branches
with the inscription ‘Royal Oak’. There
are also portraits of Charles and his wife,
Catherine of Braganza and the Royal Coat
of Arms on the reverse, with the date 1663.
The metal is greenish-brown and the style
is facon de Venise. The glass was probably
made to commemorate the marriage of
Charles and Catherine in 1663. Another
famous glass of the same period is the
‘Exeter Flute’, probably made for the
coronation of Charles II. It stands 17
inches high, with a portrait of Charles II,
a sprouting oak stump and the inscription
‘God Bless King Charles the Second’ in
diamond point on the fluted bowl.
HOWL, DIAMOND-POINT-ENGRAED
Probably Savoy Glass-house, England, c. 1676
Hi. 98 mm (1-85 in.)
GOBI.r.T ENGRAVED IN DIAMOND POINT, SIGNED
‘WM. VAN HEEMSKERK’
Netherlands, 1686. Ht. 200 mm (788 in.)
(See alio colour photograph 22)
The bowl illustrated is one of a pair found
in 1037 aI Tring. They are known as the
‘Buggins’ Bowls’, since they depict the
arms of Butler Buggin of North Cray,
Kent, and his wife Winifred Burnett of
Leys, Aberdeen. They were married in
1676, the year that George Ravenscroft of
the Savoy Glass-house in London estab-
lished his glass-of-lead. However, it was
not until the following year that the Glass
Sellers’ Company allowed him to seal his
glasses with a raven’s head seal, so the
Buggins’ Bowls must have been made
prior to this. These heavy lead-glass bowls
have an almost modern look to them, due
to the absence of the intricate cutting that
was to become so characteristic of later
English lead glass. The diamond engrav-
ing on the bowls belongs to the tradition of
the past, since the technique is more
suited to the earlier thin-walled vessels of
the soda-lime type of glass.
In 17th-century Holland diamond-point
engraving was especially fashionable as a
pastime amongst amateurs, many of whom
became very skilled. Two famous names
are Anna Roemcrs Visschcr (1583-1651)
who decorated green glass Romers with
(lowers, fruit and insects, calligraphy and
inscriptions in Roman capital and Greek
letters, and Willcm Jacobsz van Hecms-
kerk (1613-92), a cloth merchant, poet and
dramatist of Leiden, who practised calli-
graphy on glass, mainly bottles, usuall\
adding his signature and the date. Exam-
ples of his work date from between 1648
and 1690. It is thought that much of the
diamond-point engraving found on Eng-
lish glasses of this period is probably
Dutch work. Up to this time Holland had
been producing Venetian-type cristallo
glass, but towards the end of the 17th
century she began to make ‘flint glass
ranglaise’. Possibly as a result, by the
1690’s wheel-engraving replaced diamond-
point engraving as the popular form of
decoration.
WINE-GLASS, ENGRAVED IN DIAMOND
POINT
England, mid-i8ih century
The group of vessels engraved in diamond
point known as ‘Amen’ glasses forms a
sub-division of the type called Jacobite
glasses. These were used to toast ‘The
Cause’ by the clubs and societies which
fostered Jacobite sentiments in England in
the 18th century. ‘Amen’ glasses arc
engraved in diamond point with a royal
crown, the cipher IR and RI entwined, and
the figure 8, together with either two or
four verses of the Jacobite anthem, ending
with the word ‘Amen’. They are essentially
private glasses, used for expressions of
loyalty to James and Prince Charles
Edward, and occasionally Prince Henry.
Some arc dated, like the Dunvegan Castle
glass, 1747, and the Mesham and the
Drummond Castle glasses, 1749. In the
1930’s some good forgeries of ‘Amen’
glasses were put on the market. Jacobite
glasses have been in such demand that all
the various types have been reproduced by
forgers.
GOBLET, STIPPLE-ENGRAVED BY FRAN.N GREENWOOD
Glass, English; engraving, Dutch, dated 1728
Ht. 210 mm (8-25 in.)
Stipple Engraving: For the technique of
stippling, grouped and graded dots were
engraved with a diamond point on the
surface of a glass object, the dots repre-
senting the highlights of the design. The
diamond point was set in a handle which
may have been gently struck with a small
hammer to produce a single dot on the
glass. In the better examples of stippling
the decoration can be compared to a deli-
cate film breathed upon the glass. Frans
Greenwood, a native of Rotterdam,
brought the art of stippling to its greatest
heights in the first half of the 18th century.
Born in 1680, he died in 1762, and was
apparently of English descent. He was
actually an amateur glass-engraver, who
from 1726 held an official post in Dor-
drecht. Nevertheless, he produced a quan-
tity of stippled glasses, often signed and
dated, and usually copying prints after
contemporary paintings. A typical example
is the light baluster glass illustrated, which
depicts a man holding a Rotner signed
‘F. Greenwood 1728′.
Glass, Knglish; engraving, Dutch, about 1790
Laurence Whistler, England, H15-;
Olhcr artists contemporary with Green-
wood also practised the art of stippling.
The best-known names are Aert Schou-
man, G. H. Hoolart and J. van den Blijk.
In the last forty years of the 18th century
stipple-engraving was done by numerous
artists, the most famous of them being
David Wolff in Holland, whose name has
become synonymous with the technique.
He was born in 1732 at ’s-Hcrtogcnbosch
and married in 1762 at The Hague, living
there until his death in 1708. The glass
illustrated shows the portraits of William
V of Orange and his wife, Fredcrica
Wilhelmina Sophia of Prussia. In the 19th
century Andries Melort of Holland (1779-
1849) copied in stipple on to Hat sheets of
glass the work of Dutch painters. D. H. de
Castro (d.1863), a chemist of Amsterdam,
revived the technique of stippling in the
Wolff manner in the mid-19th century,
and more recently E. Voet and others in
I lolland have used the technique.
Since the last World War Laurence Whist-
ler (b.1912) of England has concentrated
upon the art of stippling glass. His designs
are highly personal and imaginative. I le
started his engraving in an unusual way,
for during the 1930’s he used to amuse his
friends and himself by scratching lines of
poetry on windows in the Elizabethan
manner. Later he developed his skill to
engrave wine-glasses, each design being
specially made for a rich and aristocratic
person. At this stage he was employing
diamond-point engraving, frequently us-
ing genuine eighteenth-century wine-
glasses on which to practise his art. His
designs were of the Baroque tradition,
with emblems and allegorical allusions as
favourite themes. In his later work Whis-
tler has also designed the glasses them-
selves, which he decorates so that form and
decor become as one. Most of these glasses
are made for him at Whitefriars.

TRANSLUCENT WINE GLASS IN THE
CAMEO TECHNIQUE
Rinnan Empire, possibly isi century A.I).
Hi. 62 mm (2-44 in.)
PORTLAND VASE IN DARK AND OPAQUE
GLASS, CAMEO-CUT
Roman Empire, late isl century B.C. or early isi
century A.I). III. 245 248 mm (0-65 075 in.)
Cameo Class: This technique is a mixture
of both wheel-cutting and engraving, and
in the later period, of acid etching. This
art, certainly practised by the Romans, in
their glass-houses at Alexandria, was
brought to such perfection between the 1st
century B.C. and 1st century A.D. that
glasses like the Portland Vase could be
produced. It is possibly the most dramatic
form of abraded decoration on a vessel. At
least two layers of differently coloured
glasses were needed for vessels of cameo
glass. These would be carved through to
the under-layers by the lapidary’s wheel.
Roman cameo glass (also called verre
double) was usually made up of translucent
white glass cased on to a darker ground of
blue glass, which was then carved with
ornamental designs or mythological or
genre scenes. The scene depicted on the
blue and white glass cup illustrated is a
mythological scene devoted to the worship
of Priapus, a fertility god.
Roman cameos form only a small group of
Roman glass products, bui they rank high
amongst the achievements of the great
glass-makers of this period. Possibly the
most famous of all Roman cameos is the
Portland vase, said to have been found in
1582 in a sarcophagus on the Appian Way
near Rome. It was bought by the British
Museum from the Duke of Portland in
1045. To make it, two gathers of glass, one
cobalt blue, one opaque white, were fused
together and probably blown and shaped
as one. This would have to have been very
carefully annealed (cooled under con-
trolled conditions), for if the rate of
cooling on cither face was even slightly
different, the glass would shatter. When
annealed, the glass would have been
marked with the desired decoration, and
the larger unwanted areas of white glass
ground away with heavy wheel abrasion to
the blue underneath.
OVAIL CAMEO (WITH A DEMONSTRATION OF HOW IT
WAS MADE)
Roman Empire, 41b century A.D.
Ht. 41 mm (163 in.)
The delicate work necessary to finish off
the figures on a cameo would probably
have been accomplished with fine wheel
abrasion, since even at this early period it
was possible for wheels the size of a
pinhead to be made for fine work. The
manner of carving was very much akin to
the carving of a layered gem-stone such as
onyx or banded agate. The changes in
thickness of the opaque or translucent
white glass layer brought about by the
differences in the depth of the carving
produced subtle tonal variations. The
illustration shows the various stages a
Roman glass-maker would go through to
produce the cameo of a youth’s head and
shoulders. First the two layers of glass
were fused together, then the oval shape
cut out; the main areas of white which
were not needed were then removed, then
the finer details were filled in.
FI.ASK WITH CAMEO CUT DECORATION
Persia, oth-iolh century A.D. Ht. 150 mm (59 in.)
Between the period of Roman cameo-
working to the great revival of the tech-
nique in the 19th century, it is often
assumed that no such work was carried
out. This is not quite the case, for cameo
glass was certainly made in Egypt and
Persia in the 9th and 10th cerituries A.D.
Complete pieces have been found from
those countries, and fragments of cameo
glass of the same period have been found
in Samarra. The overlay glass is either
coloured green or blue. The flask illus-
trated is an outstanding example of Persian
camco-cut work. It is in colourless glass,
cased with green depicting the form of a
hare, the articulation of the joints being
cut away to the colourless glass beneath.
This cameo glass formed part of the school
of relief-cutting which flourished in Persia
and probably Mesopotamia in the 9th and
10th centuries. Cameo glass was also
produced in China well before the 19th
century.
John Northwood, born in Stourbridge,
England, in 1837, was the first, and lead-
ing, exponent in England of the art of
cameo glass. After completing his famous
relief-carved ‘Elgin’ vase, he was commis-
sioned by Phillip Pargeter of the Red
House Glassworks near Stourbridge to
produce a copy of the Portland vase. He
did this successfully, and followed it up by
producing his ‘Milton’ vase and later his
famous ‘Pegasus’ or ‘Dennis’ vase, com-
missioned by Thomas Wilkes Webb,
which is illustrated here. Members of the
Northwood School included his own son
John II, who produced works in the
cameo technique. During the early years
of English cameo glass, (.1870 to 1880,
pieces were carved mainly with hand
tools, and each was normally the work of
an individual artist. To supply public
demand a quicker method for production
had to be found and thus the engraving
wheel came to be used, and the production
became a co-operation between designer,
etcher and engraver.
This new ‘commercial’ production of
English cameo glass lasted roughly from
1880 to 1890, and on the whole the results
tended to be good. Stevens 8c Williams of
Brierley Hill and Thomas Webb & Sons
of Stourbridge produced the greatest
amount of cameo work in this period.
Besides the John Northwood school there
existed a second school of cameo glass
artists at the firm of Hodgetts, Richardson
& Company of Wordsley. The two most
important artists there were Alphonse
Lechevrel and Joseph Locke. Alphonse
Lechevrel, a Frenchman, was taken on by
the firm to instruct a small group of men
in the art of carving glass cameos and was
one of the first to follow John Northwood
in this difficult technique. Lechevrel had
already made his name as a medalist, and
had a good grounding in figure, floral and
geometric designs. A few of his pieces of
cameo glass survive, including the vase
illustrated.
CAMEO GLASS VASE, RUBY BODY
Ctrved by Joseph Locke, New England Glass
Company, U.S.A., c. iMg
Alphonse Lechevrel’s most promising
pupil was Joseph Locke, a perfectionist in
whatever medium he attempted, an accom-
plished glass technologist, a finished pain-
ter, engraver, etcher, sculptor and inven-
tor. When eventually he came to be
employed by Hodgetts, Richardson &
Company he produced his masterpiece,
the second copy of the Portland vase in
cameo glass, exhibited at the Paris Exhibi-
tion in 1878, where it won the Gold Medal
Award. Locke left Hodgetts, Richardson
& Company to work for Phillip Pargcter of
the Red House Glassworks, who had the
Northwood version of the Portland vase.
He went on to Webb & Corbetts, and then
left lor America in 1882 where he joined
the New England Glass Company of
Cambridge, Mass. Hecontinued his cameo
work in America, the vase illustrated being
an example of his work there. Occasionally
he used enamelling to embellish his cameo
work still further.
Carved by George Woodall, late 19th century
Ht. 220 mm (9 in.)
The brothers George and Thomas Woodall
had the good fortune to receive their early
training in cameo work from John North-
wood. Both were engaged by the firm of
Thomas Webb & Sons of Stourbridge to
work exclusively on cameo glass. The
Woodall school is noted for being by far
the most productive of the three schools
of English cameo glass. George had a
natural talent for figure composition, as
did his brother, though Tom seemed to
prefer decorative and floral patterns and
often executed the borders on their joint
works, usually signed ‘T & G Woodall’.
The early works of George Woodall were
mainly hand-carved, and his later pieces
mostly worked on the engraver’s wheel.
Much cameo glass was produced under
his direction by a large group of workers.
Tom and George Woodall and James
O’Fallon were the designers, though some
of their workers were quite capable of
producing and executing their own de-
signs.
‘lace-de-boheme’ cameo glass vase
Bohemia, (.1885. lit. 229 mm (9in.)
Most of the English cameo glass produced
between 1880 and 1890 was destined for
the American market. After 1890 demand
for this tine work dropped, because of the
influx of cheap imitation cameo work on
to the market. These cheaper pieces were
made by giving the glass a thin opal casing
and then applying the pattern to this
casing with acid-resisting ink; the article
was then plunged into a hydrofluoric acid
bath, which dissolved away all parts of the
casing not protected by the acid-resisting
ink. Thus an article was easily made with
a flat opal glass design in very shallow-
relief on a coloured background. Still
cheaper imitations came with ‘Florentine
Art Cameo’, and i.ace-dc-Boheme Cam-
eo’ made in Bohemia, which was simply
heavy white enamelling, often copying
English cameo designs, on a coloured or
satin glass body. ‘Mary Gregory’ glass,
described in the enamelling section, was
also a cheaper imitation of cameo work.
CAMEO GLASS VASE IMITATING  CARVED IVORY
WITH APPLIED GLASS WINDOW’S
Designed by Kretschman and decorated in gold and
enamel by Jules Barbc, Thomas Webb & Sons,
Kngland, 1-.1887
Thomas Webb & Sons of Stourbridge,
England, were the sole producers of a
novelty-type cameo glass which was made
in imitation of old carved ivory. Thomas
Wilkes Webb patented the process in 1887
and in the U.S.A. in 1889. An article made
of ivory coloured or opaque white glass
was etched with a shallow relief design,
which was deepened with an engraving
wheel. The design produced was wiped
clean and then rubbed with a brown or
other coloured stain; the stain made a dark
tint in the recesses of the design, and was
also apparent on the high points of the
design. The result made a piece of’cameo’
glass which looked like old carved ivory.
‘Tom and George Woodall used Oriental
and East Indian objets d’art as models for
this technique, and other members of the
Woodall team, Jules Barbc, Jacob Facer
and Nash, produced designs for this ware.
Both Stevens & Williams of Brierley Hill
and Thomas Webb & Sons of Stourbridge,
England, produced a glassware which was
known as ‘Dolce Relievo’ or ’soft relief. A
gather of clear coloured glass was picked
up on a first gathering of opaque white or
ivory-coloured glass, and the article was
fashioned in the normal way. When the
object had cooled, a design was painted on
the outer coloured glass, which was care-
fully etched away. This left various shad-
ings in shallow relief on the white or ivory
background. Any merit that the piece may
have depends entirely on the original
beauty of the design and on the skill of the
etcher. The vase illustrated, made at
Stevens & Williams, is one of the better
examples of the technique. Thomas Webb
& Sons were also responsible for cameo
glass pieces made to imitate 18th-century
Apart from beads, decorative plaques and
models of animals, very little glass was
made in China before the 5th century A.D.
As already mentioned, it is thought that
the secrets of glass-making were brought
to (ihina from the West in A.D. 435. Little
is known of Chinese glass-making during
the Sung and Ming periods. During the
Ch’ing period a glass workshop was
established in Peking in 1680 under the
patronage of the Kmperor K’afig Hsi, and
cameo-cut glass was featured amongst its
products. The most prolific period of
Chinese glass-making, however, comes in
the reign of the Kmperor Ch’ien Lung
(1735-95). The bottle illustrated is thought
to have come from this period, being in
opaque white glass with an overlay of red
glass depicting mounted warriors, build-
ings and nobles in a stage-like setting. The
effect of layered onyx or other semi-
precious stone was thus simulated, for the
Chinese seemed to be only interested in
glass in so far as it imitated more precious
materials.
CAMEO GLASS VASE IN PINK AND WHITE OPAQUE GLASS
Ml. Washington Glass Company, U.S.A., late
iQth century. Ht. 121 mm (475 in.)
Production of cameo glass in the U.S.A. in
this period was limited, not for lack of
expertise, but because of the high cost of
production. A great deal of English cameo
glass was of course being imported to the
States. However, some was made there,
the example shown being a pink and white
cameo of the Mt. Washington Glass
Company, New Bedford, Mass. The firm
also made blue and white cameo glass,
using the same relatively few patterns for
both. The outline of the ‘cameo’ decora-
tion is finely etched, but there any
resemblance to English cameo work ends,
for the decoration is produced solely by
the use of acid, and the effect of the design
is rather flat. On the other hand, some very
notable cameo work was produced in
America by the firm of Louis Comfort
Tiffany with Arthur J. Nash. Frederick
Carder certainly made traditional cameo
glass objects in England, and later, when
he worked in the U.S.A. he invented
Steuben ‘Acid Cutback’ glass, which is
allied to the cameo technique.
CAMEO GLASS VASE
Venice, Italy, last quarter of 10th century
Cameo glass was produced in Venice in the
late 19th century. It is not known who
produced these pieces, but their chief
characteristic is that they are made of
Venetian soda-lime metal, as opposed to
the heavy lead glass of English cameo
glass. This lighter glass, when used for
both the inner and outer layers of the
objects, gives the carving of the cameo a
more delicate but less distinct appearance.
Small details such as the carving of faces
were not easily achieved with the more
brittle metal. These pieces, all apparently
carved by the same artist, are in deep blue
glass cased by white opal glass. They
attempt to copy some of the ancient
Roman cameos, including the Portland
vase. Small alabastrons, vases, large and
small cups and saucers are copied from
ancient examples. The owners of the
cameos, Pauly & Cie of Venice, produced
a few pieces of cameo engraving on leftover
blanks from the late 19th century.
VASE IN CAMEO GLASS
Kmilc Galle, Nancy, France, end of ihe iqth century
I It 44S mm (17-63 in.)
French cameo glass has en entirely different
artistic feel from that of the meticulously
engraved English type. The French glass-
makers used acid etching to engrave their
designs on to blanks of cased coloured
glass, in a style originally intended to copy
oriental models. Emile Galle (1846 1004)
was the most prominent figure in the
production of French cameo glass. He
learned his trade at Mcisenthal, and then
had a more formal art education in Weimar,
followed by studies in the major museums
of London and Paris. He established his
own workshop for glass decoration in 1867.
With his father he began the regular
production of art glass in Nancy in 1874,
and continued until his death in 1004.
Strongly influenced by the art of Japan, he
took as his favourite subjects flowers,
insects and landscape designs, in contrast
to the figure subjects favoured by English
artists for cameo glass.
CASED-GLASS CAMEO VASE IN AUBERGINE,
WHITE
By Emile Galle, Nancy, France, iSgo 1000
The smaller details on Gallc’s cameo glass
were finished off on the engraving wheel.
The majority of his cased glass vases, with
a decoration of flowers and leaves, date
from after 1890. So-called ’standard Galle’
vases with conventional Art Nouveau
flower patterns in one colour against an
opaque white background as illustrated arc-
probably factory products, rather than
Galle’s personal handiwork. It is very rare
to find two identical pieces among the
massive output of his factory. Like most
French glass-makers of this period, he
usually signed his work. Even after his
death, when the factory continued under
the direction of Victor Prouve, the pro-
ducts were still signed ‘Galle’, hut a star
preceded the name, and production in
Gallc’s style certainly continued until
1913. Closest to Galle’s work came the
products of the firm of Daum in Nancy;
this concern was established by Jean
Daum Urol hers, Nancy, Franee, c. 1895
Jean Daum’s two sons, Auguste and
Antonin, were personally influenced in
glass-making by Emile Galle. They soon
(V.i890) began to produce articles decor-
ated with flowers and leaves in cased glass,
using on their works a monogram incor-
porating the Cross of Lorraine. Their
early productions of Art Nouveau glass
were very fine, and they continued to make
art glass until the First World War, but
their later work is of much poorer quality.
Once Galle died, his inspiration seemed to
die with him. Other makers of cameo glass
in Galle’s style were the factory of Lunc-
ville, near Nancy, and also Sevres, which
produced the designs of the firm of
Landier et Fils. Other lesser-known
workers in French cameo glass were De
Vez, Le Gras, Andre De Lattc, Edward
Michel, M. Walter, Alphonse G. Reyen,
Tessire du Motay, Kessler and Mareschal.
The technique of French cameo glass was
copied by many countries in Europe.
i \MH) glass vasi in KM) imhiiihu 111 ysn
By Tiffany, U.S.A., late i<)th century/early 20th
century. Hi. 146 mm (575 in.)
Louis Comfort Tiffany (1848-1933) joined
forces on a shareholding basis with Arthur
J. Nash, an English glass-maker, and other
investors. Nash later brought in his sons
A. Douglas and Leslie Nash. They oper-
ated the factory at Corona, Long Island,
New York, known as Tiffany Furnaces,
and later as Louis C. Tiffany Furnaces
Inc. When Tiffany left in 1924, it became
the A. Douglas Nash Co. Tiffany products
owed much to L. C. Tiffany from 1 he-
design point of view, but it was the Nashs’
practical knowledge of glass-making that
made them technically outstanding. One
of the products that must be mentioned
here is their cameo glass, which generally
consisted of two or more layers of glass.
The designs were painted on in acid-
resistant materials, then the object was
plunged into an acid bath, which revealed
the under layer or layers. The design was
finished off with engraving and polishing
tools.
VASE IN ‘ACID CUTBACK’
By Frederick Carder, Steuben Glass Works,
U.S.A., early 20th century. III. 305 mm (12 in.)
Frederick Clarder of the Steuben Glass
Works, Corning, New York, established
an etching room for glass at the works in
about 1006. He was familiar with the
etching process in connection with cameo
glass from his Stevens & Williams days in
Kngland, and he carved his cameo plaque
‘The Immortality of the Arts’ while
working under the tutelage of John North-
wood. Until about 1932 Carder produced
at Steuben a cameo-type glass which is
called ‘Acid Cutback’ by collectors. The
design was transferred to the glass by
means of a print made on paper in a ‘wax
ink’. The area of the glass not covered with
the pattern was painted with wax, to
protect it from the etching acid. The glass
was left in the acid bath for the time
required to etch the designs to the desired
depth. Two layers of glass were normally
used, the darker colour most frequently
being the outer layer, though occasionally
single-layer pieces were made.
COLOURLESS GLASS WITH CUT
DECORATION
Ireland, late iSth century. Ht. 13(1 mm (538 in.)
(See also colour photograph 21)
Cut Glass: To most people the term means
the type of deep wheel-cutting used on
Irish glass from the late 18th century
onwards, and also on modern cut wine-
glasses and containers. The popularity of
today’s cut-glass products is a legacy of the
great popularity this type of glassware
enjoyed in Kngland and America during
the 19th century. In this style of decoration
angular cuts are made into the vessel
which, when polished, act as prisms with
adjacent cuts, giving a very brilliant effect.
The glass blank would first be marked
with the pattern, a mixture such as white-
lead and gum water being used. Following
the design, deep cuts would be roughed in
against an iron wheel fed with abrasive
such as sand. Water-cooled stone wheels
which need no abrasive might be used to
add fine lines. The cuts could then be
polished by lead or wooden wheels, or,
after the second half of the 19th century,
by plunging the vessel into a mixture of
hydrofluoric acid and sulphuric acid.
waisted bowl in clear, colouri j.s.s glass, stained decanter in cut glass with mushroom stopper
yellow, vviiti cut decoration England, about 1820. Ht. 241 mm (0-5 in.)
Ireland, 1.1820-30. Diam. 143 mm (563 in.)
The years 1780 to about 1835 can be
described as the period of freedom for
Irish glass-making, when the trade was
unfettered by any serious restraints. It was
during this period that some of the most
notable work in cut glass was produced in
Ireland. The principal glass-house cities
were Dublin, Cork, Waterford and Belfast.
The common belief that Waterford glass
has a blue tint is entirely wrong; some
glasses made on the Continent in imitation
of the Waterford style are markedly blue
in colour, but the original Waterford glass
is clear and colourless. Objects made
included barrel-shaped and straight-sided
decanters, bowls and vases, often with a
turned-over rim and a domed foot, covered
bowls and jars with button finials, urns,
kettle-drum bowls, plates, bowls and
stands, ewers with swan neck handles, jugs
with rounded bodies, and serving dishes.
The cut decoration was mostly done by
English craftsmen, who emigrated to
Ireland after Free Trade had been de-
clared in 1780.
The historical impact of early 19th century
English cut glass can be compared to the
influence on glass-making that Venice had
in the 16th century or to that of the
engraved glass of Central Europe in the
17th and 18th centuries. The inability of
the Venetians, with their lighter soda-lime
metal, to copy cut glass led to their eclipse
as the main glass-making centre at this
period. The success of the French and
Belgian factories in copying English cut
glass was a main cause for their develop-
ment in the first half of the 19th century.
The United States of America quickly
took to cut glass, and even in Central
Europe the style could only be partially
resisted. Mitre-cutting, or the cutting of
V-section grooves into glass, was the
characteristic Regency style. The decan-
ters, like the illustrated one, were mostly
barrel-shaped, with rings applied to their
necks, and usually with ‘mushroom’-
shaped stoppers.
Kngland. probably the 1820’s. lit. 89 mm (3-5 in.)
in m dish i\ tit GLASS
Kngland. about 1820. Length 219 mm (8-6? in.)
The V-section grooves of the mitre-cutting
were usually in straight lines. The main
decoration on the glass was caused by the
intersection of these grooves at ninety or
forty-five degrees. The simplest decora-
tion, when the grooves met at ninety
degrees, was the production of a field ol
plain ‘diamonds’ or small pyramids of
glass. There were many variants of this
sort of decoration, but one of the most
popular was the field of intricate ’straw-
berry diamonds’ found on so many pieces.
The bowl illustrated is a typical example.
Since the middle of the iSth century the
geometrical cutting of the soft English
lead glass had absorbed many glass decora-
tors, but it was the styles of the early 19th
century that were to establish its lasting
popularity. Regency cut glass was in fact a
logical technical development from the
shallow facetted glass of the mid-i8th
century.
Regency cut glass subordinated the shape
of the vessel to the decoration. Its solidity
and sparkling appearance reflected the
ostentation that was prevalent in all the art
forms of the British Regency and Con-
tinental Empire styles. In addition to the
square-cut patterns, other designs on
vessels involved the use of radiating cuts.
Usually the base would be ’star-cut’, and
the edge of the vessel might have ‘fan-
cutting’ on each of a scries of semi-circular
projections. This can be seen in the oval
cut-glass dish illustrated. It is strange that
this style of decoration, which needed such
thick glass for its execution, should coin-
cide with the period of the Glass Excise.
Between 1745 and 1845 the various
governments sought to gain revenue by
taxing the glass output in England.
Strangely enough, the effect of the Excise
seemed to be the concentration of all the
glass-makers upon one current style of
clear glass with cut decoration.
The Techniques of Taking Away
Early 19th-century glass shapes can norm-
ally be distinguished from their late 18th-
century forerunners by their heaviness and
formality. The cut decoration was more
often arranged horizontally than vertically.
This is apparent on the cut-glass dish with
cover that is illustrated. It has generally-
been assumed that most cut glass was
made in Ireland, where until the mid-
1820’s there was no Glass Excise tax. This
cannot in fact be true, since there were
never more than ten factories in Ireland
producing decorative glass, whereas in
England they numbered about fifty. Apart
from a few special cases, it is virtually
impossible to distinguish between English
and Irish glass on the grounds of style or
of the glass used. When the Excise was
introduced into Ireland in 1825, that
country was producing Ј20,000 worth a
year of flint glass, compared with over
Ј20,000 worth in Scotland and Ј170,000
worth in England.
The tendency to call all cut glass ‘Irish’ or
‘Waterford’ probably reflects the way
research has been made into the subject.
Much has been written on the history of
the Irish factories in the early 19th
century, but very little has been done on
the much wider field of English cut glass
in this period. Wine-glasses or ‘rummers’
of the early 19th century in England
usually had convex or straight-sided bowls.
Short bucket shapes were common, as
well as the taller flute shape illustrated.
Stems were short, often with disc-shaped
knops. The intersecting mitre cutting used
so much on other vessels was considered
unsuitable for drinking glasses, so their
decoration usually consisted of flat vertical
facets towards the lower part of the bowl.
Jugs had become a popular form of glass-
ware but in Regency times they tended to
copy pottery shapes and did not have the
fluidity of form of true glass art.

THE JUDGMENT OF PARIS
Nevers, Prance, 1777. Hi. 210 mm (8-25 in.)
Verre de Nevers: This technique origin-
ated in Nevers in the late 16th century, and
it is more closely allied to lamp-working
than to the normal techniques used for
creating glass objects, such as blowing and
moulding. It flourished in Europe for
some two centuries. This delightful group,
depicting the judgment of Paris, was made
in Nevers in the heyday of the glass
figurine, between the late 17th and early
18th centuries. The figures were made by
softening rods of glass of different colours
and winding them over a metal armature.
Every fold of the garments on this group
has a metal base below the glass. When the
glass was sufficiently thick, and after
repeated reheating, it was modelled to
shape with the aid of prods and pinchers. I n
Verre de Nevers groups, decorative details
such as leaves are made entirely of glass,
with no supporting core, while such forms
as birds might be blown.
WINE-GLASS WITH LAMP-WORKED DECORATION
Saxony? early 18th century. 111. 140 mm (55 in.)
Lamp-working is a technique used by
glass-makers to make objects by using only
a single flame as a source of heat. Glass
rods are normally used, held over the
flame and melted or softened to the
desired shape. In modern times, the most
popular lamp-worked objects are small
animals made out of coloured glass rods
melted down, bent and joined to the
required form. Details like eyes are made
by putting a small drop of molten glass on
the object, with possibly another centred
on the first drop to form the pupil. The
ornate stem-work on Venetian and /aeon
de Venise wine-glasses is closely allied to
this technique. One of the rare instances of
true lamp-working on a blown glass is the
wine-glass illustrated, which is one of a
series that have a band of lamp-worked
decoration round the centre of the bowl.
The work stands out in three dimensions
from the bowl, the small Cupid being
almost free-standing; he holds a garnet in
his hand. The provenance of these vessels
is not certain.
TULIP-SHAPED JUG
Karl Kopping, Berlin, c. 1900
I It. .120 mm (126 in.)
Karl Kopping (1848-1914) was a painter
and etcher in Berlin. Between 1892 and
1900 he designed some tall decanters and
goblets made at the lamp from tube glass.
At that time Germany had lor some ten
years been under the influence of the style
for naturalism created by Emile Galle of
France. It became known in Germany as
the Jugendsttl, and Karl Kopping’s exag-
gerated Art Nouveau glass vessels form a
part of this movement. The starting point
for his designs was the flower on its stalk,
and the colours he used could be both bold
and delicate. The stem of the glass
illustrated is in blue, the leaves are in
copper-green glass and the tulip-shaped
bowl has a metallic finish. The piece is
signed on the foot: ‘C. Kopping’. 1 lis work
became popular, and several museums
bought examples of it, but today they are
regarded more as period pieces.
BIRD FOUNTAIN
England, it»th century. III. 4H9 mm (1925 in.)
(See also colour photograph 16))
It has always been the custom for glass-
blowers to amuse themselves in spare
moments by creating fantasies in glass.
These are known in the trade as ‘friggcrs’
—a word which possibly derives from the
Old English ‘Jrician’, to dance. In Scotland
they are called ‘whigmelccrics’. In the
19th and early 20th centuries friggcrs
included elaborate fountains surrounded
by birds with tails of glass fibres and fully
rigged sailing ships on spun glass seas, as
well as the objects mentioned on page 100.
The more elaborate friggcrs are usually
protected by a large glass dome. Friggers
were made for amusement, for family
presents, as an extra source of money, or
even for fully mercantile reasons. Travel-
ling glass-makers who visited fairs and
private houses produced many of these
novelties, having as their kit a bundle of
multi-coloured glass canes and a little
furnace heated by a tallow flame.
The ‘taking away’ or abrasive techniques of
glass-making have as long a history as glass
itself Even earlier, hieroglyphic inscriptions
had been engraved on hard stone vessels, and
we definitely know that as early as the 16th
century B.C. glass was being engraved in
Egypt. Most of this engraving was probably
done with pointed instruments or possibly
with a rotary wheel. Wheel-culling and
wheel-engraving are the two terms most
commonly encountered, and though they are
thought of as almost separate methods,
basically the techniques are the same. In
both, a rotating abrasive wheel cuts into the
glass surface. The mam distinction is that
large wheels are used for cutting, where the
worker holds the glass on lop oj the wheel,
between himself and his tool; and small ones
for engraving, where he holds it below the
wheel, so that he can see what he is doing.
Culling is characterised by large-scale,
geometric designs, usually relatively deeply
incised, and engraving by jine, detailed,
usually pictorial work.
Grinding and Cutting from a Raw Block of
Glass: This was the only ‘taking away’
technique that was used to produce a com-
plete vessel or other object. The method,
which was covered in the first chapter,
dealing with techniques before blowing
was invented, continued in use for a short
time after the 1st century B.C. The ring
illustrated is a good example of the method
used to produce a single decorative object.
One might imagine that a gem or even a
glass cameo was once set in the concavity
left by the glass-cutter at the front of the
ring. (lasting glass in moulds and blowing
glass were so much easier, that this tech-
nique, using rotary abrasion to shape an
object, fell into disfavour. It was con-
tinued primarily as a means of finishing off
already made glass forms, or as a means of
embellishment.
GOBLET BEARING THE NAME OF TUTHMOSIS III
(1504 1450 B.C.)
Egypt III. 130 mm (5-1 in.)
Early Wheel Engraving: The goblet illus-
trated, made of turquoise-blue opaque
glass with a gold ring at the rim and base,
is a famous example of early incised work.
Some glass vessels from the 18th Dynasty
in Egypt are decorated with incised
inscriptions such as that found by Sir
flinders Petrie at Tell el Amarna. A frag-
ment of a bowl at The Corning Museum of
C1 hiss bears a fragmentary inscription
relating to the wife of Amcnhotep III
(1412 1375 B.C.), and is said to reveal ‘the
characteristic tapering ends of wheel cuts’.
Whether the engraving on these early
vessels was done with a point or by means
of a rotating instrument has been tho-
roughly discussed by R. J. Charleston (see
Bibliography). For the most part it seems
that just a pointed instrument was used,
and it was only in the later Egyptian
period that there is evidence of wheel-
engraving on the glass, probably by the use
of a bow-lathe.
SHALLOW BOWL WITH PETAL DESIGN
Roman Empire, 7ih 5th century B.C.
Hi. 39 mm (155 in), diam. 174 mm (685 in.)
In the general Mesopotamia-Assyria-Asia-
Minor region, rotary abrasion was used to
sharpen up decorative motifs, which were
first produced by moulding processes.
There is a large family of bowls with
radiating petal motifs—one being illus-
trated here—the earliest of which is known
to date from not later than 700 B.C. These
were produced by being cast into moulds,
and finished by grinding and cutting. As
abrasive powder on the wheels, emery was
probably used; this was apparently known
in Egypt at least as early as the 18th
Dynasty. The known use by the Egyptians
of tubular metal drills in cutting granite
was probably paralleled further East in the
first millenium B.C. Some such means
must have been employed in the hollowing
out of vessels like the famous ‘Sargon vase’
(see first chapter).
It is not known what type of abrading
equipment was used in Roman times to
decorate glass. It has been suggested that
an all-purpose tool could have been used,
which could be adapted as lathe, drill or
engraving wheel as needed. The Romans
definitely used abrasives such as emery for
cutting, and pumice stone for polishing the
cuts. Probably from Egypt came a group
of facet-cut and ‘diamond’-point engraved
bowls from the ist and 2nd century A.D.
(See Diamond-Point Engraving.) These
are the parent group from which are
descended all late Roman cut and engraved
glasses with figured scenes. The quality of
Alexandrian engraved work deteriorated
during the 3rd and 4th centuries A.D.
However, in the west, from some time in
the 3rd century A.D. onwards, a great
quantity of figured cut or engraved glass
began to be produced in Italy and the
neighbouring provinces, of which the dish
illustrated above is an example.
Figured decoration in engraved work was
not altogether abandoned by workers in
the eastern workshops, as is seen in some
later exports to the west from the east.
However, in general they began to con-
centrate on easier designs, suited to less
skilful engravers, and presumably for more
speedy production. The jug illustrated,
with geometric decoration in friezes, is an
example of the rather rough designs the
West Syrian/Egyptian workshops fav-
oured. It is in dark yellowish-green glass,
which is of rather poor quality, being
bubbly and streaky with impurities. The
fine linear and facet cutting of the earlier
period is not in evidence. Wheel-engraving
was now used to imitate facet cutting, with
designs of curved lines, circles and ovals.
The style took particular root in Egypt,
and probably in Syria also. Many of the
vessels of this type found in the west must
have been imports from these areas.
Diatreta are the most extraordinary and
most outstanding examples of the tech-
nique of abrasion ever made. From experi-
ments carried out by Fritz W. Schafer in
Germany and Barbini and Fuga in Italy it
has been proved with almost complete
certainty that these delicate cage cups were
produced by lapidary means, and not by
any other technique (see Bibliography). A
small battery of wheels and readily avail-
able abrasives, plus the skill of the en-
graver, are all that is needed to make a
diairelum from a solid, carefully annealed
blank. Diatreta are the finest product of
the Cologne and Trier glass-makers in the
4th century A.D. They have been found
in the Rhineland, on the Danube, in
Northern Italy and in Greece. The three
most beautiful, all with inscriptions, came
to light in Cologne. The inscription on the
one illustrated is in Greek, and conveys an
exhortation to drink.
With the decline of the Roman Empire in
the West, glass engraving died out. This
was largely because there was no (ine-
quality glass made after this time that was
suitable for engraving. In the East the
technique never ceased, and glasses with
cut decoration can be traced in unbroken
continuity through Sassanian to Islamic
times. Baghdad and Basra were noted for
cut glass in the 9th century A.D. and later.
In the 9th and ioth cerfturies, after a
renaissance under the dynasty of the
Samanids, a school of relief-cutting flour-
ished in Persia and probably in Meso-
potamia, which in Europe was not rivalled
until the end of the 17th century. The flask
illustrated is an early example of a shape
that was to remain popular throughout the
Islamic period. The scrolling engraved
design was to exert a great influence on the
mind of the Islamic artist.
Hedwigsglas in light brown clear glass, the
gilt-copper foot a later addition
So-called Hedwigsgldser represent the last
wheel-cut glass vessels to be produced in
the Orient, and are recognised as master-
pieces of Egyptian skill. Their origin is by
no means absolutely certain. These thick-
walled glasses carved in hochschnitl (deep
cutting) are maintained by B. Shelkov-
nikov to be the work of a 12th-century
White Russian workshop in Novogrudok,
which was presumably under the influence
of Byzantium. They are certainly a con-
tinuation of the art of rock-crystal cutting,
and more probably originated in Egypt.
The motifs used include stylised lions
and griffins between palm branches, as in
the illustrated example. Two of these
glasses reputedly belonged at one time to
St. Hedwig (1174-1243), wife of the Duke
of Silesia, and it is from her that the glasses
take their name. (Legend has it that the
saint caused water to change into wine in
one of these glasses.) Her niece, St.
Elizabeth (1207-31) also had a Hedwigs-
glas, reputed to give strength to women in
labour, which eventually came into Martin
Luther’s possession.
clp with facet-cltting
Barnwell, Cambridgeshire, England, lasi quarter of
1st century or early 2nd century A.D.
Ht. 90 mm (355 in.)
Facet-Culting is a form of decoration that
goes back certainly to the early Roman
period. Large, broad wheels were needed
to make the facets in the glass. R. J.
Charleston points out that Pliny mentions
some of the abrasives used for grinding in
Roman times, such as ’sand of Naxos’ for
emery, ’sands’ from India, Egypt and
Nubia, and certain stones from Armenia
and Cyprus. He also points out that
Theophrastus mentions pumice and also
emery in his History of Stones. Pliny
mentions Thebaic stone from Egypt and
pumice for the final polishing of marbles.
A wheel with a broad cutting or grinding
edge was certainly used to produce the
facet-cutting on this cup, which is in clear
glass with a greenish tint. Cups like this
found in England and Cyprus are thought
to originate from Western Syria or Egypt
and, in the later 2nd century A.D., from
East Syria.
During the 2nd century A.D. the East
Syrian glass-makers and decorators devel-
oped their knowledge of the art of glass-
engraving including facet-cutting. The
art lived on through Sassanian to Islamic
times. The flask illustrated, in clear glass
with a slight blue tinge, is a typical example
of the continued tradition of wheel-cut
decoration. Oval concave facets cover the
body of the flask, and the neck also has a
ring of facets. Previous to this, in Sassanian
times, wheel-cutting, particularly facet-
cutting, resulted in some striking glass-
ware. Most of the surviving examples from
this period arc cither facet- or linear-cut,
including characteristic shapes such as the
hemispherical bowls with concave cut
facets which were exported to the West
and East, even as far as Japan.
Facet-cutting, particularly for stem-work,
became popular in the second half of the
18th century. Facetted tumblers and
bottles were current in Bohemia, and in
Germany facet-cut knops appear on wine-
glasses from the Laucnstein and other
Hessian glass-houses in the first half of the
18th century. In England at the same time
glass-grinders were facetting the edges of
mirrors, and simple diamond-facetting
was beginning to appear on some glasses.
Scent bottles of opaque white glass and
blue glass, and snuff bottles dating from
about 1770, had all-over facetting and
were often enamelled and gilt. Once
thought to have originated from Bristol,
they more probably came from the Birm-
ingham, South Staffordshire or even Lon-
don area. From the middle of the 18th
century, facet-cutting became an estab-
lished form of decoration in England,
appearing particularly on wine-glass stems,
between c. 1760 to f.1810. Examples can be
found through to the modern period.
VASE WITH FACET CUTTING
By Keith Murray. Stevens & Williams, England,
1939. Ht. 206 mm (8-13 in.)
The architect Keith Murray (b.1893) first
began to take an interest in glass after the
Exhibition in Paris in 1925. He asked
himself why he found the conventional cut
crystal of England so unsatisfactory. After
analysing old English glass, he decided the
glass was better if left plain, or when it was
cut, if the cutting was in a ‘well organised
decoration’, flat cutting being particularly
appealing. The idea of an artist designing
for industry was beginning to be accepted
in England, and in 1932 it was arranged
that Murray should act as designer for
glass for Stevens & Williams at Brierley
Hill, near Stourbridge. During the seven
years he worked in glass he produced
designs for simple unornamented table
services and for some larger pieces. His
most important works are the large vases
and dishes in heavy metal decorated with
facet-cutting reminiscent of early Georgi-
an work. They powerfully express his
architectural feeling, and the decoration
matches the material superbly.
BOWL WITH  FACETTING
By Miluse Roubiekova, Borske sklo, Czechoslovakia,
1958. Diam. 450 mm (17-7 in.)
After the political revolution in Czecho-
slovakia in 1948 the glass industry was
nationalised. The Creative Glass Centre in
Prague was set up in 1952, in order to
establish contact between the glass-works
and the artists and designers, and to
encourage research into new methods of
decorating glass. Czechoslovakian glass
has long been known for its great tradition
in lead crystal cutting, and like its British
counterpart, Bohemian crystal still enjoys
a large public all over the world. The
tradition continues, but finds new expres-
sion in less rigid cut-glass patterns, softer
patterns of a gently formalised character
being increasingly favoured. A good exam-
ple of the new trend is the free irregular
facet-cutting on this bowl designed by
Miluse Roubiekova made at the Borske
sklo, Novy Bor. The usual diamond or
star motifs are no longer in evidence, but
the unsymmetrical lines of the bowl still
enhance the brilliance of the glass.
Later Wheel Engraving: In gem-cutting,
wheels of various materials were certainly
being used by the 15th century to engrave
and polish. By the 16th century, the prin-
ciple of continuous rotary movement had
been established. Engraving equipment
driven by a foot treadle was in use by glass
engravers in the early 17th century. Caspar
I.ehmann, the greatest name in the revival
of glass-engraving in Europe in the late 16th
century, was an engraver of hard-stones
before he was a glass-engraver, and one-
can assume his equipment was more or less
the same for both crafts. Lehmann was
‘Imperial gem-engraver’ to the Emperor
Rudolph II at Prague in 1601, and in 1608
was described as ‘Imperial gem-engraver
and glass-engraver’. From the very begin-
ning, then, the glass-cutter undoubtedly
borrowed his ideas from the gem-cutter,
whose art was so closely allied to his own.
This was a tradition that was to continue
into relatively modern times.
Caspar Lehmann’s engraving is shallow—
because of the thinness of the glass—two-
dimensional and unpolished. Prague was
one of the centres for rock crystal cutting,
and this is reflected in the style of the
engraving, which is flatly cut and gains its
effect from the contrast between the white
engraved lines and the’dark background of
the clear glass. In 1600 I.ehmann obtained
an Imperial Privilege conferring on him
alone the right to practise the art of glass-
engraving in the Imperial domains I le
bequeathed his privilege to his pupil
Gcorg Schwanhardt the Elder, born in
Nuremberg, who worked with him at
Prague. In 1622 Schwanhardt returned to
Nuremberg, where he founded a brilliant
school of wheel-engraving which flourished
to the 18th century. The new potash-lime
glass developed in Bohemia and Germany
in the early 17th century was eminently
suitable for the technique of wheel-
engraving.
COVERED GOBLET IN GREEN GLASS WITH CLEAR GLASS
STEM (DETAIL)
Probably engraved by Hermann Schwinger,
Nuremberg, Germany, about 1665- 80
Hi. 394 mm (15-5 in.)
Schwanhardt’s work in rock crystal and in
glass shows a complete mastery of the
technique of wheel-engraving. His work
was both polished and unpolished, and he
often used as motifs landscapes with
figures, with formal baroque scroll work.
He sometimes added delicate diamond-
point work to his glasses. Among his
pupils were members of his own family,
his sons, Georg the younger and Hcinrich,
and three of his daughters. Other notable
artists among the Nuremberg engravers
were Hermann Schwinger (1640-83) and
Georg Friedrich Killinger (first recorded
1694, died 1726). They all engraved the
same characteristic type of tall goblet,
with hollow knopped stem. The family
of Johann Hess at Frankfort-on-Main
engraved similar glasses in the second half
of the 17th century. Johann Heel (1637-
1709) glass-engraver, silversmith, faience-
painter and engraver of prints in Nurem-
berg also engraved glass in a somewhat
different style, following the motifs he
used in faience painting.
COVERED GOBLET WITH HOCHSCHNITT CUTTING
By Friedrich Winter, Silesia, end of 171I1 century
Ht. 280 mm (11 in.)
{See also colour photograph iH)
During its most flourishing period (c. 1685-
1775) German glass-engraving was done
mainly by unknown artisans working for
themselves in north-eastern Bohemia and
Silesia. However, the best-known work
was done by the engravers to three German
courts. Friedrich Winter set up the first of
these workshops in 1687, with permission
from Count Christoph Leopold von Schaff-
gotsch, at Petersdorf in the Hirschbcrger
Tal. He used water power, and produced
many glasses in the Hochschnitt technique.
Under the patronage of Friedrich Wilhelm,
Elector of Brandenburg, Friedrich Win-
ter’s brother Martin (died 1702) set up an
engraving workshop in Potsdam near
Berlin in 1687. This was also run by a
water-power mill specifically to produce
works in Hochschnitt (deep cutting) and
Tiefschnitt (intaglio work). Martin Win-
ter’s highly gifted nephew Gottfried Spiller
worked here, becoming a partner in 1683.
His engraving included flowers, allegories,
portraits, coats of arms, sometimes in
Hochschnitt, and occasionally he used the
ruby glass of the Potsdam glass-house.

Egypt
In Ancient Egypt jewels were an important part of costume; they were worn by men and children as well as by women, and were often used to adorn statues of gods and goddesses. Images of sacred animals such as cats and crocodiles are often given necklaces, bracelets and earrings made of gold. Earrings, introduced from Asia, seem to have appeared later than other types of jewellery and the earliest important example dates from the end of the second intermediary period (circa 1600 BC). This is a pair consisting of several hoops soldered together which would have hung from large holes pierced in the earlobes. Another early type is a simple hoop of gold, glass paste, faience, jasper or other semiprecious stone worn by pulling the earlobe through the open end, something that was possibly done in infancy.
X-ray photographs of mummies in the Cairo Museum show earlobes extremely elongated and deformed by the use of very heavy ear ornaments in childhood. One mummy in the museum of Turin has two earrings worn on the same earlobe. The mummy of Tutankhamen has large holes pierced in the earlobes, proving that earrings were worn by men as well as women.
During the New Kingdom (1559-1085 BC) large earplugs came into fashion and these also caused deformation of the earlobes. They are designed as faience discs and have a groove round the edge which enabled them to fit into an enlarged hole stretched in the earlobes. Other ear ornaments of contemporary date were in the form of mushroom-shaped studs with the stem pushed through such a hole. In both cases these ornaments were worn in the plane of the ear rather than at right angles to it.
By the end of the XVIIIth Dynasty the decoration of earrings was very varied: cascades of drops, flowers and bell-shaped motifs for pendent earrings and rosettes and flowerhead motifs for the large discs.
The Greek World
Around 800 BC contacts between Greece and the East became closer and two centuries of Oriental influence in Greek art followed. Cyprus and Syria — taken in the broad sense to include Phoenicia and the Neo-Hittite North Syria — were the two countries that mainly influenced Greece, the latter acting as a channel for Egyptian and Mesopotamian influence.
The relative abundance of gold artefacts of this period is undoubtedly related to the opening up of the East to the Greek world through colonization, giving access to rich sources of precious metal in Asia Minor, especially to the Lydian gold mines. The preponderance of the ateliers of Eastern Greece throughout the period is evidence of this. Embossing, filigree and granulation grew in popularity and inlaying with stones, amber and glass made its appearance. Gold earrings of flat crescent design, often decorated with granulation and inlays, and suspended with fine chains are well represented, as well as earrings designed as spirals to be thrust through a hole in the lobe. They were either simple gold wire spirals or had a variety of finials decorated with beading and granulation, worn with the ends pointing upwards. Many variations of this type are known, some with more, some with fewer turns of thin and thick gold wire, others splayed out in the form of a letter W with a higher central point. In the late 7th century the W-shaped spiral was sometimes decorated with elaborate finials in the shape of griffins’ heads, pomegranates or rams heads of Oriental inspiration.
The crescent or boat-shaped earring of Eastern tradition, seen in Ur in the middle of the 3rd millennium BC, finally reached Greece via Syria and Cyprus about 700 BC and the type was to flourish there and in the Hellenized centres of the Eastern Mediterranean for some four centuries. Greek examples of the 7th century BC are characterized by a rather fat boat-shaped motif, sometimes decorated with granulation, on a thin gold wire going through the pierced earlobe. The hoop with beaded pendant of Cypriot tradition became popular in the 7th and 6th centuries Bc but remained confined to Eastern Greece.
Greek jewellery of the 6th and early 5th centuries is of artistic brilliance but very little has survived. It is, however, amply documented in vase painting and sculpture. Three of the few regions relatively rich in archaic gold jewellery are Sicily, Rhodes and Cyprus, where crescent earrings of the traditional form continued to be produced.
It was not until after the Persian wars that gold became more plentiful in Greece. By the accidents of history, this Greek Classical jewellery is better known from examples found in Southern Russia, Cyprus and Southern Italy than from Greece proper. The forms were extremely varied and among the abundance of diadems, necklaces, bracelets, pendants and finger-rings, earrings were very popular. They came in three main forms: the boat or crescent, the spiral or helix, and the disc with cone or inverted pyramid pendant.
As in the Archaic period, vase painting and sculpture would seem to suggest that earrings were the most popular form of ornament; statues of female figures were frequently adorned with them, sometimes sculpted in marble and sometimes made of precious metal, as can be inferred from the holes pierced in the ears. It is possible that the ornaments created to adorn statues or donated to temples to be worn by images of goddesses in religious processions were more elaborate, rich and complex than those used in ordinary life, which were buried with the dead and have now been recovered from graves. That they were part of ordinary dress is proved by representation on coins, vase paintings and terracotta figures.
As already mentioned, most of these surviving examples came from areas outside mainland Greece, such as Etruria and Southern Italy.
The boat-shaped earring, which, as we have seen, dates back at least to 13th-century Cyprus, was the most popular form of ear ornament in the Classical period. In its simplest form it consisted of a crescent terminating in a wire for insertion into the earlobe, and remained in fashion, virtually without a break, throughout antiquity. In the 5th and 4th centuries BC it was widespread throughout Southern Russia, Thracia, Macedonia and also Sicily where it was depicted on Syracusae coins of 474-450 Bc adorning the head of Artemis-Arethusa.
P 25 The earliest examples from the Classical period are very simple, consisting of a boat-shaped motif decorated with beading, filigree and granulation. Later, in the second half of the 4th century BC, they tend to be more elaborate in design, often with suspended pendants and chains of various types. Among the most complex examples of the boat-shaped earring is one from Tarentum where the boat is completely encrusted with filigree, granulation, leaf and palmetto motifs and is merely a vehicle
P. 27 for the exuberant decoration of rosettes, nikai, doves, chains and pendants. This decorative repertoire of palmettos, rosettes, flowerheads and spirals can also be found, enlarged, on contemporary vase painting and funerary monuments. The Tarentum example perfectly illustrates the general trend of the period towards increasing elaboration of decoration which is common to the whole Hellenic world. The heavy use of filigree floral motifs and stylized palmettos to enliven the flat surface of the basic boat-shape and the curved surface of the rosette petals are deliberately intended to create a complex chiaroscuro effect with light, shade and reflection and give drama and depth to the object; in later periods this effect was often achieved chromatically by the combination of various different gemstones and by the use of multicoloured enamels.
It is interesting to note that even at this stage the craftsmen of Tarentum were also catering for a less prosperous clientele, making gilt terracotta imitations of the type described above, probably cast in moulds taken from the more expensive gold examples — although it is possible that these cheaper, rather fragile ornaments were made specifically as grave goods.
Another very popular form of earring of the second half of the 5th century BC was that in the form of a disc supporting either one or three pendants, the central one invariably being a female head, an inverted pyramid, an amphora or a cone and the two flanking ones articulated chains with links of various types. By the Hellenistic period disc-and-pendant earrings were to become the most popular and widespread form of ear ornament.
Among the earliest examples is a superb pair from Tarentum, each with a disc decorated at the centre with a filigree rosette within a border of corded wire and beaded work and a female head suspended from a central pendant flanked by two chains of conical beads with bell-shaped terminals. The female head pendants are chased in great detail, with the hairstyle typical of the time as seen on terracottas, vase paintings and coins: parted at the centre, divided in two bandeaux and gathered in a large bun worn low on the nape of the neck. The hair being brushed away from the ears leaves ample space for a large pair of earrings consisting of a pyramidal cluster of beads suspended from a rosette. The great popularitiy of earrings throughout antiquity is certainly linked to the fashion for women to wear the hair gathered at the top or the back of the head, or at least brushed away from the temples.
The head-shaped pendants show an interesting feature: at the base there is a small hole into which it is likely that a piece of sponge or cloth soaked in perfumed oil was inserted. Putting perfumed sponges in necklace pendants was common in antiquity, and Etruscan earrings with perfume compartments have been found. Though not common, such earrings with female head pendants have been recovered in Southern Russia, Cyprus and Etruria.
Another highly significant detail on this example is the presence on the disc and chains of small traces of delicately coloured enamel. The introduction of polychrome enamels in jewellery was an important innovation that dramatically transformed the work of Greek goldsmiths, who had until then achieved effects of movement and contrast through the use of filigree and granulation. It is unfortunate that in this and many other examples the major part of the enamel has now worn away, since polychrome enamels defined the different elements of the decoration, and were therefore essential to the overall effect of the piece.
Rather more widely dispersed were disc earrings with an inverted pyramid pendant often between two chains. This type of pendant, already seen in the Archaic and early Classical periods, became very fashionable towards the end of the 5th century, reaching the height of its popularity in the 4th century BC, and continued to be one of the favourite forms of ear ornament of the Hellenistic period: many examples have been found in Cyprus, Southern Russia, Macedonia and Apulia. The type is also represented on coins from Elis, Locri, Metapontum and Tarentum, on the tetra-drachm of Eukleidas from Syracuse, and on 4th-century BC terracotta antefixes from Tarentum, Metapontum and Heraclea.
The earliest examples are characterized by extremely elaborate gold leaf applications, filigree and granulation on both disc and pyramidal pendant. Later examples are simpler and often completely undecorated apart from a gemstone, usually a garnet, set at the centre of the disc. Gemstones, which made their first appearance in jewellery towards the end of the 4th century BC, became more and more prominent from now until Roman times.
Contemporary with the earring types described above and just as important were
disc earrings with a vase or a cone pendant. They enjoyed a long period of popularity,
P. 26 peaking between the 2nd and i st century BC. Tarentum, Cyprus and Southern Russia
offer the best examples, often set with garnets, coloured glass beads and pearls. This
type is well documented on Syracusae and African coins of the ,3rd and 2nd century
BC.
P. 28, 29 Hellenistic art is cosmopolitan in character, the same forms being found all over the Eastern Mediterranean. Jewellery was no exception-, examples from Apulia are hardly distinguishable from those from Thessaly, Macedonia, Asia Minor, Thrace or Southern Russia.
Particularly popular in the 2nd century BC were disc earrings with bird pendants
made of glass paste. Sirens, peacocks and other winged creatures naturalistically P. 31 modelled in this way were widely popular. The dove was a special favourite because
of its assocation with Aphrodite.
Another variation on the same theme is where the pendant assumes the shape of a miniature Eros. Eros, tutelary god of death and love with his double symbolism, erotic and funerary, is a very common motif in Hellenistic jewellery from the late 4th to the late 2nd century Bc and is represented in various ways. Almost as popular was Nike or Victory, a feminine version of Eros. With time, emphasis on the human figure became so pronounced that the disc disappeared, leaving Eros or Nike simply suspended from the earlobe by means of a hook of gold wire.
Another very popular type of ear ornament from the Classical period is the helix earring, comprising a tubular piece of thin gold leaf twisted into a spiral with various decorative motifs as terminals. This had already existed in the Archaic period and was very well known to the Oriental Greek world as early as the 7th century BC. Many examples have been found in Cyprus, Rhodes, Thrace, Macedonia and Southern Russia, all related to the same prototype, probably of Cypriot origin, descended from the Mycenean spirals of Enkomi. Towards the mid-4th century BC, another form of earring appeared, consisting of an open circle with a small pointed finial on one side and a larger terminal in the shape of a human or animal head on the other. There are similar examples with human or animal heads on both terminals, one larger than the other. These remained popular throughout the Hellenized world until the beginning of the i st century BC. The favourite motif for the terminal was the lion head, but antelopes’, rams’, dogs’ and bulls’ heads are also known, their eyes set with gemstones or coloured glass pastes.
Both helix and animals’ head earrings raise the question of how they were worn. By modern standards they seem too large to be pushed through a hole in the earlobe, but no alternative fitting has ever been found. We must assume, therefore, that in the past women submitted themselves to far greater tortures than we are prepared to suffer today for the sake of fashion.
The conquests of Alexander the Great between 333 and 322 BC transformed the Greek world. Vast territories came within the Greek sphere of influence, while at the same time Greece itself was exposed to influences from Egypt and Asia. The Hellenistic age, as culturally and artistically defined, lasted from about 322 BC until the inauguration of the Roman Empire in 27 BC. Much jewellery has survived from this period. Gold became more widely available through intensive mining in Thrace and the dispersal of captured Persian treasures.
Earrings were designed as simple gold hoops either decorated at the front with a
single motif, such as a bird, a dolphin, a bunch of grapes, or a negro’s head, or hav-
ing a pendant in the form of such a motif. Much use was made of glass paste and gemstones to pick out details and create contrasts of colour, and a new technique known as `dipped enamel’ was introduced to give a multicoloured effect, especially to earring pendants in the shape of birds or other creatures.
Together with these types, which are very typical of their period, many other earrings of older design continued to be produced and amongst these the disc-andpendant model was perhaps the favourite.
Etruscan
The earliest remains of the Etruscans of central Italy are dated about 700 BC, continuing in a recognizable form until about the i st century BC. Their great wealth, attributable largely to the mineral resources of the country, is reflected in the sumptuousness of their tombs. In female graves, vessels of precious metal and silver and gold jewellery such as fibulae, pectorals, bracelets and elaborate earrings reflect not only the important role women had in that society, but also jewellery’s function of `hoard’ and ‘reserve fund’. Although in its earliest manifestations Etruscan art was remarkably free of Greek influences, it did not long remain so, and by the end of the 7th century Be Greek artistic influence was becoming increasingly significant. Etruscan art, however, never lost its identity completely.
The earliest Etruscan earrings, of about 625 BC, in the shape of crescents and hoops, are not dissimilar to those found elsewhere in the Greek world at the same time. The first truly Etruscan form of earring made its appearance just before the
p. 28, 29 mid-6th century. The type is known as a baule, Italian for a bag or a travelling case, and it is perhaps the best known form of Etruscan ornament. Its popularity lasted just over a century. It consists of a strip of gold leaf bent round to form a cylinder, the two ends connected by a gold wire also acting as a suspension hoop. The ends of the cylinder were sometimes closed by a circular gold plate. The decoration, consisting of gold leaf application in the form of stylized flowers and rosettes, embossed leaves or geometrical motifs, filigree and granulation occasionally embellished with polychrome enamels, shows a certain ‘horror vacui’, pressing as many decorative details as possible onto the small gold surface.
Another type of earring of typical Etruscan design, which first appeared in the second half of the 6th century, is the disc richly decorated with concentric bands of
P. 3 I floral and geometrical motifs embossed or made of filigree and granulation, often inlayed with gemstones, amber or glass paste. Earstuds would perhaps be a more appropriate name for this type of ornament, with a hollow tube at the back ending in a loop to be pushed through the earlobe and a safety chain attached to the side of the disc for fixing the loop. The origin of these large ear-ornaments, which in some cases measure as much as 7cms in diameter, is probably Lydia.
In the 5th century BC the most fashionable and widespread form of ornament in the
P 30 Etruscan world was a type of earring consisting of a tubular hoop decorated at one end with the head of a woman, a river-god, a ram or a lion. With slight variations, it remained popular throughout the 4th and 3rd centuries BC.
Among the most characteristic earrings of the 4th and 3rd centuries is the
P 29, 31 horseshoe-shaped plaque type, mounted with a cluster of embossed globules, hollow inside in order to act as containers for perfumed oil. An entirely Etruscan creation, these earrings were very popular throughout the country as can be seen from the many surviving examples and their frequent reproduction on terracotta and vase paintings. Particularly interesting in this respect is a group of votive statues found in Lavinium, depicting female figures bejewelled with necklaces and earrings of this type apparently moulded directly from the gold originals. These cluster earrings remain very frequent in tombs of the 4th century Be and tend to disappear in favour of new models coming from abroad only towards the end of the Classical age.
What we can describe as a ‘Greek Taste’ did not appear in Etruscan jewellery until the last thirty years of the 4th century and must be seen in the context of the general process of Hellenization which followed the conquests of Alexander the Great. The typical Etruscan forms gradually disappeared to be replaced by the more international disc-and-pendants, the pendants supporting shapes such as inverted pyramids, birds, bells and amphorae, or by hoops decorated at the front with amber heads of negroes. In some examples local tradition and external influence blend together; e.g., a gold hoop, decorated at the front with a horseshoe-shaped motif typical of the Etruscan taste, supporting a female head pendant of pure Tarentine inspiration.
Rome and Byzantium
Examples of silver and gold jewellery from pre-Republican and Republican Rome are very scarce. From those that survive we can conclude that between 70o and 250 Be Roman jewellery was for all practical purposes Etruscan. Material is even scarcer for the period between 25o and 27 BC, but we may assume that Roman jewellery, as well as Etruscan, was basically the same as Hellenistic.
For many centuries jewellery was a luxury looked upon with official disapproval in the Roman world. The amounts of gold which might be buried with the dead and which a Roman lady might wear were fixed by law. Certain items of personal adornment, moreover, such as finger rings, were strictly reserved to certain social classes and for specific occasions.
By 27 BC, when the Roman empire was established, Rome had finally swallowed up the remnants of the Hellenistic world with the annexation of Egypt in 30 BC. The political changes, however, had very little effect on minor arts, and during the first years of the empire jewellery continued to be produced in Hellenistic forms. The major centres of jewellery manufacture were the old Hellenistic centres of Antioch and Alexandria, followed by Rome itself. Progressively wealth, luxury and ostentation replaced Republican sobriety and jewellery became important in display.
In the eastern part of the empire and in Egypt earrings designed as plain hoops or hoops decorated with human and animal heads of Hellenistic tradition continued to be produced with only minor variations until the 2nd century AD. Other types consisted of long S-shaped hooks with variously designed pendants. A new type appeared suddenly in the i st century AD and lasted for about a hundred years. It consisted of a gold hemisphere with an S-shaped hook fitted at the back, sometimes surmounted by a similar but smaller boss. This was very popular: many examples have been found as far apart as Rome, Cyprus, Siphnos and Palestine, and it is also frequently depicted on mummy portraits. Closely related is a type consisting of a spherical cluster of pearls or beads.
In the course of the 2nd century AD a whole new class of earrings appeared, quite unrelated to Hellenistic shapes. In its simplest form it consisted of a gemstone set in a large bezel holding a drop pendant, secured to the earlobe by means of an S-shaped hook. During the same period earrings were produced in the form of circular gem-set elements supporting horizontal bars with two or three pendants. Gemstones including sapphires, emeralds, aquamarines and topazes were by now freely employed in jewellery.
Literary sources such as Pliny, Seneca and Petronius have much to say on the subject of inaures andpendentes. Earrings were the favourite manner of displaying wealth for the patrician lady who often turned for advice to the auricolae ornatrices, women whose job was to attend to the problems caused by prolonged wearing of large and heavy earrings. The new extravagance has been referred to by Pliny who tells us that Caligula’s wife Lollia Paulina wore emeralds and pearls on her hair, head, arms and fingers as well as on her ears at everyday functions. Women, he says, liked to wear earrings set with two or three pearl drops that rattled at the slightest movement of the head; hence their name of crotalia.
During the 3rd century AD the Roman empire began to crumble; during the 4th it was divided into an eastern and a western empire; and during the 5th the western half collapsed leaving only the eastern empire, governed from Constantinople (formerly Byzantium). One effect of these changes was that Oriental influences were again powerful in Western art, but as far as jewellery is concerned, Roman techniques and
P. 32, 33 forms continued to be used and earrings with two or three gemset pendent drops remained normal.
Earrings appeared to have fallen from favour during the Byzantine period, with fashionable ladies preferring to wear large and elaborate ornaments on the temple or sides of the face, similar to those worn by the empress Theodora in the mosaic of San Vitale in Ravenna, but they did not completely disappear. The only truly Byzantine form of earring which was popular in the late 6th and 7th centuries consists of a large but light pierced gold crescent decorated with openwork stylized flower and scroll motifs.
In western Europe, jewellery production declined drastically, and only one form of earring stands out as original. This consists of a wire hoop, simple or twisted, decorated with a polyhedral motif, usually inset with garnets. The popularity of this type is confirmed by finds from Ostrogothic, Merovingian and Southern Russian sites dating from the 5th to the 9th century.
The Middle Ages
Although the Middle Ages and the Renaissance are particularly rich periods for jewellery in general, the role of earrings is so minor that one can say that they virtually disappear for the six hundred years between the i i th and i 6th centuries. The reason for this is to be found in hair and dress fashion: elaborate hairstyles, headdresses and high collared costumes left very little scope for earrings.
In the Middle Ages it was customary for a woman, especially married women, to conceal their hair with a coiffe hubet and from the middle of the 12th century with a barbette, which consisted of a stiffened head-band worn with a chin strap concealing the ears. Respectable married women had to keep their heads covered when seen in public, a rule which went back to St Paul: ‘For if the woman be not covered, let her be shorn or shaven: if it be a shame for a woman to be shorn or shaven let her be covered.’ The concealment of a woman’s hair was a way of demonstrating dependency on her husband who was the only man with the privilege of seeing it (a woman loosening her barbette in public would be regarded as unladylike and morally lax) and explains why unmarried girls were allowed to wear long and flowing hair. In both cases, however, the scope for earrings was non-existent; with the barbette the chin band covered the ears and the cheeks, not only preventing the use of earrings but also hindering eating and even speaking; on the other hand unmarried girls with their hair flowing over their ears also did not have the opportunity to display earrings. During the 13th century written evidence for earrings occurs only in books like the Roman de la Rose where unusual jewels such as earrings are listed: ‘Et met a ses deux oreilletes. Deus verges d’or pendans greletes’.
Around the middle of the 14th century hair fashions underwent a considerable change, becoming much more elaborate and frequently embellished with precious
head ornaments. One of the typical coiffures, which developed at the end of the 14th P. 37 century and retained its popularity for more than a hundred years, consisted of two thick braids of hair looped over the ears; another consisted of hair puffed out and padded over the ears and kept in shape by a gold net. The changes, however, did not improve the scope for earrings.

Desks, Bureaux, Bookcases and Cabinets
Table•desks—desks on stands—the fall-front scrutoire—development of the bureau—secret drawers—knee-hole and partners’ desks –escritoires and military chests—boudoir desks and the “bonheur du jour”-19th-century davenports—Samuel Pepys and the first bookcases—the bureau bookcase and origins of the china cabinet—wall shelves and small standing bookcases.
Even in the 16th century life must have been starting to become a little complicated for the average individual. For the professional man and even for the farmer there were records to be kept and letters written and it was probably due to these facts that by the closing years of Elizabeth’s reign small table-desks began to appear in many households. The steward and the merchant would have to employ a counter and chests as well but for the average man the table-desk was sufficient.
These small antique boxes, almost invariably constructed in oak, were very personal belongings and during the Stuart and Restoration periods it was the custom for the owner to have his name and some commemorative date carved upon the front. Although these table-desks vary in size from the rarer 3 feet in width to the more common 20 inches, they nearly all have the same basic construction. A box shape with a gently sloping lid, hinged with wrought-iron butterfly hinges, contains a small compartment of three drawers. A hasp lock was a normal addition.
These little desks are sometimes mistakenly referred to as bible boxes, as mentioned in Chapter 3. I think it was not unlikely that they contained the Bible in some homes, but there would have been little room left for documents accounts and valuables. I have a table-desk which belonged to a George Lowe who had his name and the date 1666, the year of the Great Fire of London, carved on the front. In it I keep a large bible which has been in my wife’s family since the 17th century. The bible has the date 1668 imprinted with the dedication on the cover and it is an interesting coincidence that bible and desk should be so close together in time.
For anyone requiring an antique desk, it is possible to buy a table-desk for under £10 and placed on a small tavern type table with a drawer in the front they make an excellent substitute for the larger and far more expensive bureau. As a matter of fact, it was rather in this way that the bureau developed. During the latter years of the 17th century two types of desk were in evidence. There was the desk on a stand, which was a development of the table-desk, and a much larger and important piece of furniture called the secretary or scrutoire.
The desk on a stand marked an elementary but noteworthy stage in desk development. Hitherto it had been difficult to gain access to the contents of a desk when the desk lid was already covered with letters and documents. Accordingly, the hinges were changed over to the lower edge of the lid which now opened outwards and was in future referred to as the desk-fall. The fall was supported in the open position by pull-out battens called lopers and in some early stands it was the practice to incorporate two small gate-legs which could be swung out to support the fall instead of using lopers. The fitted interior of small drawers and added pigeon-holes was now much more accessible and it became possible to enlarge the number of drawers with the corresponding increase in the size of the desk.
The scrutoire was a much bigger item than the desk on a stand, being frequently over 5 feet in height. It consisted of a flat-fronted rectangular cabinet mounted on either a stand or a chest of drawers. The whole front of the scrutoire folded outwards and was supported by chains or metal stays. It offered a vastly bigger working area than the desk lid and contained many more drawers and compartments for holding documents and ledgers. Although used in the larger establishments with their corresponding need for more administrative storage space, the scrutoire enjoyed only a short existence and by 1700 was more or less obsolete. Strangely enough it returned to favour about 100 years later in a smaller and more compact form. It was produced in France during the post-Revolution Empire period and re-introduced into this country as the secr&aire a abattant or fall-front desk.
What is rather interesting now is that the furniture designers of the Queen Anne period took the better features of the desk on a stand and the scrutoire and incorporated them in a new form of desk which became known as a bureau. The early bureaux were made in two separate parts, the upper desk section being mounted on a base consisting of a chest of drawers. The sections were provided with carrying handles at the sides so that when being moved each part could be carried separately.
The fall was no longer supported by stays or gate-legs but by lopers. These were almost square in section in the earlier bureaux but by the middle of the 18th century it was found that lopers of greater depth were less likely to sag. Later desks have two small drawers instead of lopers which are pulled out to support the fall when in use. Another characteristic of early 18th-century bureaux was the well or space below the interior pigeon-hole compartment. The well was covered by a sliding panel and was only accessible when the fall was in the open position.
Being rather difficult to get at when the open fall was covered with documents its use was abandoned and it had disappeared from the design of most bureaux by 1750.
The charm of many early desks is enhanced by the Georgian love of secret drawers. It is always the fond dream of the antique furniture collector that one day he or she will buy a bureau and, during that first exciting examination when the new piece has been delivered to the house, a hitherto undiscovered secret drawer will be found. Alas! I have never had the luck although a friend once bought a small wooden casket which proved to have a secret drawer and when this was opened after much patient searching for the secret locking device it was found to contain a gold brooch which had lain hidden for nearly 200 years. The remains of a quill pen, jammed in the back of the well, has been the only personal relic of a previous owner which I have ever found in an old desk.
On the whole, secret drawers were seldom as ingeniously secretive as one could have wished. They follow a certain set pattern of variations; the document slides behind the half pillars on the front of the interior compartment; a false bottom to one of the small drawers; a shallow drawer concealed behind part of the shaped border above the pigeon-holes; the drawer behind a drawer which pulls out on a long handle like a church collecting box. I think the best one I have ever come across was the secret drawer which had a false bottom, a sort of double-bluff. I only hope that the designer never felt the vexation of having it burgled.
Large knee-hole desks with flat tops were made about the middle of the 18th century. Some, being very large and double sided, were known as partners’ desks. They were so designed that two people could work as they sat facing one another. A smaller version of the knee-hole desk appeared during the early Georgian period and is very much sought after today. One in walnut and in good condition might cost anything up to £200. There is some doubt, however, as to whether these smaller kneehole desks were actually made to serve as desks or were really designed as small dressing tables. Further reference will be made to this point in the following chapter.
Another type of desk which was made during the later Georgian period was the secretaire. This has all the appearance of being just a chest of drawers but it is recognisable from the outside when it is recalled that the drawers in an ordinary chest become progressively deeper as they near the floor. The deepest drawer of an escritoire is located at the top and is in fact the fall of a desk. When the top section of the chest is pulled out, pressure on catches at either side of the front will allow the false drawer front to fold outwards when it is normally supported by brass stays. The secretaire has the usual fitted interior of small drawers and pigeon-holes and was a favourite form of writing desk until well into the 19th century. The two stage military chest referred to in Chapter 3 sometimes has an escritoire drawer fitted into the upper part.
A number of small desks, intended specifically for the use of ladies, were designed by Sheraton and his contemporaries. They were lightly made and were referred to as boudoir desks or writing tables. Among them was a revival of the smaller desk on a stand which was called a cylinder top desk. Instead of the usual desk-fall it had a curved top which was made to slide backwards to reveal the fitted interior.
Another version was adapted from a French design and was known as a bonheur du jour. This is a title for which there is no suitable English equivalent; literally it means “the happiness of the day”. As letter writing was one of the chief relaxations of ladies of the more leisured classes in the later 18th century perhaps “bonheur du jour” means just what the name implies.
A little desk known as a davenport was very popular among the Victorians until about 1860. It was supposed to have been first made by Gillows of Lancaster to the design of a Captain Davenport. Early examples were made in mahogany and were rectangular in shape, the desk-top being constructed to slide forward over the knees of the user when required. After 1830 the davenport was usually made in walnut and the desk top was designed to overhang permanently, being supported by carved legs or brackets. Until recently, davenports could be purchased for a few pounds and may still be acquired very reasonably.
Bookshelves have been in use ever since books have been collected into libraries but it was not until the Restoration that the bookcase with glazed doors appeared in this country. Credit for the design is given to the great diarist, Samuel Pepys who was an ardent book-lover. In the Pepys library at Magdalene College, Cambridge, are the original bookcases which Pepys had made for his own use and which he bequeathed with his books to his old university.
At approximately the same time as features of the desk
on a stand and the scrutoire were combined to produce
the bureau, a bookcase was superimposed on some exam-
ples to form the bureau bookcase. It was first made about
1700 and is still being produced in a variety of forms.
Some early bureau bookcases had doors fitted with
mirrors instead of plain glass. These were fashionable
during the Queen Anne period and are very rare today.
Some small walnut bureaux with a single mirrored door
were made to fit between the long sash windows of the
early 18th-century drawing rooms and their value at pre-
sent might be £700 or £800 each. An interesting feature
of the bureaux with mirrors in the doors were the little candlestick slides fitted into the rail just under the doors and above the desk proper. When lighted candles were placed upon them at night the illumination was doubled by the reflected light from the mirrors.
Plain glass doors through which the gilded leather binding of the books could be seen superseded the mirrored doors by 1720. The glazed variety were known as astragal doors from the beading or astragals which formed the framework for the glass. There is a story that all genuine old bookcases have thirteen glazed sections in each door. This would appear to be yet another legend without foundation because I have not infrequently seen genuine old doors with fifteen astragal panels.
Another of the many pieces of furniture which originated during the Restoration was the china cabinet. Collecting the attractive new porcelain from the far east with its translucent body and fine decoration became very popular in London and the larger sea-port towns. To preserve their fragile specimens, lacquered cabinets from China were imported and mounted on heavily carved wooden stands of British manufacture. These were sometimes coated with silver or gilding and were quite a decorative feature of Restoration and William and Mary period furnishing. The fact that the contents of the lacquered cabinets were not visible probably brought about their replacement by the glazed china cabinets of the Queen Anne period. These were usually mounted on a lower stand furnished with the cabriole legs of the times.
For some reason, perhaps because an 18th-century bookcase may be too overpowering in the 20th-century house, it has become the practice in recent years to separate bureaux from their bookcases. The result is that the latter may often be obtained for under £10 and mounted on a small stand or side table they make very attractive china cabinets.
Sets of wall shelves were in use during the 16th and 17th centuries but apart from small racks for holding pewter spoons, few have survived. Small fitments of wall shelves were reintroduced about the middle of the Georgian period. Normally, they consisted of two or three shelves with two small drawers beneath and those of the later Chippendale school had delicately fretted sides. Being very lightly made they could be used only for small books but in all probability they were designed to display ornaments. The later types were of thinly cut mahogany with pleasantly shaped sides and a little boxwood stringing inlaid along the edges of the drawers.
The late Georgian period saw the production of standing bookshelves or bookcases without doors, many made to the designs of Hepplewhite and Sheraton. They were comparatively small, being only about 3 feet in height and width and, as well as being made in mahogany, quite a number were constructed in pine. These were then painted either white or black with gilding and though not particularly common can sometimes be bought quite cheaply at house sales.

Cupboards, Wardrobes and Small Hanging
Cupboards
Evolution of the cupboard—development from a chest form—the Gothic hutch or livery cupboard—origin of the “cup board” or buffet—the court cupboard and press—lasting popularity in Wales of the deuddarn and tridarn—armoires, cloak cupboards and the linen press—later appearance of the wardrobe—hanging dole and medicine cupboards—various fronts of the corner cupboard—painted interiors—Victorian buffets antique porcelain tea pot made in france .
The cupboard may have evolved from a chest form because a chest, when placed on its end, would serve as a narrow cupboard or locker sabino marks . Again, the chest on legs with an overhanging top and hinged doors beneath, like the counter mentioned in Chapter 3, could also have been an ancestor of the cupboard gateleg table imperial furniture .
The counter was sometimes referred to as a hutch in old documents but nowadays the latter name is usually only given to a wired cage for tame rabbits value of antique rectangular drop leaf pedestal dining . In the Gothic period the hutch was a small planked cupboard used chiefly as a food larder antique harlequin figure . The door and front were perforated with frets of an architectural character to allow air to circulate and so keep the food fresh cheap art neuvou side tables . Pieces of loosely woven horse-hair were nailed to the inside of the frets to keep flies and insects away from the contents art deco chairs mahogany . While the horse-hair has long since perished the remains of the small nails which held it in position are sometimes still to be seen antique oak drawleaf trestle table .
Many books on antique furniture show an illustration of Prince Arthur’s Cupboard, which is in the Victoria and Albert Museum antique glass “la granja” . It dates from around 1500 and is one of the finest pieces of English Gothic furniture in existence the most expensive silver tray . It is unique and the chances of discovering a similar piece are negligible king george 1v furniture . However, it is possible that the smaller planked hutch, although very rare, may still be found by the discerning seeker after antique oak peter behrens side chair . I know of one in the possession of a Cotswold antique dealer but he says that f1,000 would not buy it satsuma pottery thousand flower . On the other hand, there are a considerable number of hutches at Haddon Hall in Derbyshire l shaped sideboard . In that part of the house open to public view I have counted nearly a score, so it is not beyond a reasonable possibility that there are hutches lying in old barns and attics elsewhere which might turn up one day and offer themselves to a knowing buyer inlaid moorish bone .
Apparently, it was a custom in the Middle Ages to keep a small supply of food in private rooms for use at any time antique epergnes . This would be stored in hutches which in time came to be referred to as livery cupboards lusterware made in czecho-slovakia . This term was in use until a few years ago and I remember an inn near my home where there was a painted notice over the entrance to the inn-yard, now given over to car parking, which bore the legend “livery and bait” french style porcelain gilded weight driven clock . This indicated that change of horses and refreshments for the journey were always readily available italian spider leg table .
Aumbry is another old name for a hutch or livery cupboard 16th century spanish trunk . There are some antiquaries, however, who maintain that the aumbry was not a standing cupboard but was essentially a recess in a wall which was enclosed by a door in a frame antique drop leaf side table furniture makers mark england . It may be that in different times the word was used to describe several types of cupboard 18th century rococo copper candlesticks .
The “cup board” proper was originally a side table or buffet which was a fitment with two or three shelves made to stand against the wall in the proximity of the dining table aimone mfg co new york . On this were kept the wooden trenchers or platters for use at meal times antique austrian furniture . In the 16th century and later it was used to display the silver or pewter table-ware, according to the opulence of the household georgian kneehole cabinet .
Early buffets vary in the amount of decoration, some being merely a set of shelves with some simple carving on the rails supporting the shelves classic furniture drawing . Others were larger and more elaborate with bulbous turnings on the front uprights and sometimes the centre and top rails concealed long shallow drawers which fitted under the shelves chippendale gateleg table . These were used for storing spoons and knives only as forks had not been adopted for table use at this time cheap art neuvou side tables .
Towards the end of the Elizabethan period it became the practice to construct buffets with the upper staging enclosed with panels and doors old antique sofa tables . This piece of furniture was known as a court cupboard from the French word court, meaning short or low origins art deco . Eventually, the lower stage of the court cupboard was enclosed as well during the early years of the 17th century and the cupboard form became really established from then onward chippendale style coffee table tilt value . In recent years the term court cupboard has been quite often misapplied to these completely enclosed cupboards late 1920s patek winged lugs . The late R american made ceramic french figurine . W christian mayer furniture . Symonds, who was probably one of the most authoritative furniture historians of the 20th century, has been able to confirm by much diligent research into old house inventories and wills that the correct name is actually a press renaisance design dining table made .
The press was invariably made in oak and a considerable
number were produced during the 17th century gate leg table 17thc . They were
built as a rule with three tiers of cupboard doors showing
on the front, two doors being on each of the top and
middle tiers and one on the bottom antique bread rack . The rails were decora-
ted with low-relief strapwork carving and ornamental
mouldings were sometimes applied to the panels and
door frames dining habit tendency . Carved initials of the owner and his wife,
together with a date to commemorate some family hap-
pening, were favourite additions to the design napoleon leather and steel campaign chair . Many of
these cupboards had large pendant turnings on either
side of the overhanging top george 3 style . These were the vestiges of the original bulbous turnings used on the front uprights of the buffet and court cupboard collectors glasgow school of art . The small doors are, for the most part, found with wrought-iron butterfly hinges but early presses had upper doors which turned on wooden dowel pins dutch plate family dining . Small turned wooden knobs were used as handles on the door frames cantagalli marks .
The early press was essentially a cupboard for storing food and table-ware and should not be confused with the linen press of the following century, details of which will be given later in the chapter antique tea set - rh macy . For the most part it was of fairly large size being 6 to 8 feet in length and would have been found in the dining or living rooms of the more prosperous Stuart and Commonwealth farmers dressing a tea table . Consequently, it can seldom be accommodated in a present-day house myott,son&co. .
However, there are smaller and rather attractive versions of the press which were made in Wales and enjoyed a degree of popularity during the 18th century, although the press in England had been superseded by the dresser mother of pearl coffe table fake antique egypt . These Welsh pieces were of two very similar types and were known as the deuddarn and tridarn, the former being constructed with two tiers or stages only while the latter had three pictures of 5 drawer antique library desks and tables . The top tier of the tridarn is seldom a fixture and can usually be lifted off, should this be necessary louis sue . These small press-type cupboards are seldom ornate but being comparatively small, often only 4 to 412 feet in length, the breaking up of the front surface with doors and panelling permits the mellowness of the old oak to be appreciated to the full new york city 18th century pembroke tables . In the deuddarn, drawers are sometimes included between the lower and upper tiers vases ceramic antique carved figures on front .
Tall cupboards for hanging clothes had been in use on the continent since the early 16th century chicken coops shelves . There they were referred to as armoires and it is thought that they were probably used for storing armour and weapons as well as clothes 17th century dutch silver . The few early armoires to be found in Britain are nearly always of French or Flemish origin, and cupboards designed for holding garments were rarely to be found in these islands until the beginning of the 18th century kneehole dressing table styles .
Hitherto, the accepted method of storing gowns and suits of clothes was to use a chest or a large chest of drawers “perspectiva cabinet” . Now a large cupboard with double doors was adopted for the purpose antiques furniture,josef hoffmann . It was mounted on a chest of drawers but a closer examination of the two top drawers will show them to be merely false fronts which do not open antique centre pieces for dining table . Behind them the space is used to afford greater hanging room for the clothes in the cupboard above art deco candle sticks . The lower drawers were made to function in the normal way oak draw refectory table . Before the invention of clothes hangers the contents of the cloak cupboard or clothes press were hung on a series of wooden pegs placed along the back and sides of the cupboard interior 18th century knife boxes .
Sometimes, the cupboard space above the drawers was fitted with wide trays for the storage of linen large rectangle dropleaf table . Although the exterior would be identical to that of a cloak cupboard, the article in this case would be called a linen press and the top drawers would be real ones as a deeper hanging space for clothes would not be necessary candelabrum .
Taller wardrobes without dummy drawers were pro-
duced by Chippendale, Hepplewhite and other cabinet-
makers type of wood used for roman furniture . These were very elegant in appearance with
finely veneered doors and sometimes with bow-fronts 18th century mahogany drop leaf table cabriole legs .
In mid-Victorian times some huge wardrobes were con-
structed in three or four separate sections kashgai carpet . These were
screwed together when assembled in position and included
bays for hanging clothes, long dressing mirrors and sections
with trays for keeping linen wear drop leaf table with spiral legs . Today, these well-made
mahogany and satinwood edifices are indeed white
elephants for they are much too large ever to go into a
modern house or flat royal staffordshire by clarice cliff nancy . Usually they are bought very
cheaply and then taken apart so that the fine wood in them can be used in the manufacture of reproduction pieces, sometimes advertised as “made from genuine old wood”  . I suppose that if one cannot acquire the authentic article then these are the next best thing five legs two leaf oak antique dining table .
Since the late 16th century, small hanging cupboards have always appeared among the more usual furnishings george speight porcelain . Towards the end of the reign of Elizabeth I and in early Stuart times wall cupboards with, fretted fronts or with the door frames filled with rows of baluster shaped spindles were in general use barley sugar twist pillars timber . Nowadays they are referred to as dole, or food, cupboards and were once hung inside churches to contain the bread doles provided by charity bequests antique 19th century nesting tables birds-eye maple . They were probably used as food larders in the kitchens of private houses as well art deco writing sets . Although this cupboard form is rarely found as an antique in England these days it is not an uncommon discovery in Wales social origins of art deco .
In the 17th and 18th centuries when doctors and apothecaries were few and far between, every housewife kept a store of medicinal herbs and remedies for administering to her family in times of sickness care of antique tortoiseshell . These were preserved in small cupboards which hung on the wall or stood on a chest of drawers and contained a number of pigeon-holes and small drawers for separating the various herbs antique paper mache trays . I always regret having failed to acquire one of these little spice or herb cupboards which a dealer friend of mine had in the shop meissen figures dating . Other dealers had passed it by, saying that it was only an old top from a grandfather clock which had been converted into a little cupboard vintage wooden card table . Actually, it was a genuine Queen Anne medicine cupboard with a finely panelled door and a neat compartment of drawers inside maccasar modernism france . However, the question had then arisen, as it does for all collectors sooner or later, of just where it was going to fit in with all the other things, and the opportunity had to be missed the revival of the games in the 19th century .
Corner cupboards, like tripod tables, are probably more numerous than any other type of antique furniture and are still to be had very reasonably antique table footed clock . They were in general use throughout the Georgian period and served many purposes antique dutch coffee table 17th century . Nowadays a corner cupboard with the doors left open makes an attractive setting fora small collection of china or Staffordshire chimney ornaments antique sideboard with built-in pendulum clock . Oak corner cupboards are usually flat-fronted with canted corners but occasionally they are found with bow-fronts patek philippe, 1930s, rectangular, hinged back . This is the pattern which was more often adopted for the mahogany cupboard and with an inlaid frieze at the top and a couple of small drawers beneath, this would make a very desirable acquisition to any modest collection of antique furniture antique dressers yorkshire .
Some flat fronted corner cupboards have glazed, astragal doors, that is with little panes of glass set into a framework of thin bars or beads robinson and leadbeater figure . These are usually original but a door with a single sheet of glass in it has probably had the wooden panel removed and glass substituted for the display of china or silver oak draw leaf table 18. th . Do not be in a hurry to strip or paint over if the interior of your cupboard is decorated in a faded olive green colour american antique slant front desk . This is probably the original finish as the Georgians were very fond of green linings to their cupboards and cabinets and a little toilet soap and warm water will most likely restore the paintwork very nearly to its original condition decoupage on veneer .
Finally, some mention should be made of the reappearance of the buffet in mid-Victorian dining rooms late 1800’s dining table european . Much lighter in design than its Tudor counterpart, it usually consisted of three quite deep shelves supported on four slim mahogany, turned corner uprights renaissance dining tables . These buffets, like the 17th-century press, are often too large for the modern house moser, austrian furniture designer . Occasionally they are to be seen, laden with dish covers, cutlery and cruets, in the spacious dining rooms of those old-fashioned but comfortable coaching inns which have survived into the day of the motor car art deco dresser inlaid wood .
Beds, Day-beds and Cradies
Early beds—rest for the rich and not-so-rich—misnomer of the “four-poster”—characteristics of 17th-century bed construction—development of the tester—beds of the mid-Georgian era—foreign influences on late 18th-century bed design—truckle and folding beds—origin of the day-bed—Restoration and early 18th-century types—Regency elegance of the chaise-longue—the Victorian sofa—cots and cradles padded antique library wood arm chair .
Early beds were looked upon as the most important items in any household 18 century porcelain placks louis xvi . They were handed down from father to son and were always mentioned with some degree of pride of possession czechoslovakia porclian . They were often very heavy, monumental constructions and the occupants depended for their comfort on enormously thick, feather mattresses 19th century parian busts . These were laid either on a network of ropes which passed through holes in the framework or on a foundation of wooden slats scroll planter table y chair .
There must have been a general fear of draughts and fresh air at night or the bedrooms were very cold and draughty because it was the practice to enclose the beds with panelling or heavy curtains until the end of the 18th century antique tea caddies, penwork . It is hardly likely that many people nowadays would sleep in a 17th or 18th-century bed for choice, although I have an old collector friend who nightly repairs to his Georgian four-poster neo classic bookcase maple tuscany . I should add that it has been fitted with a box-spring mattress of the latest slumber-inducing design antique half leaf table .
In medieval times the wealthy slept on free standing
frame beds overhung by a tent-like canopy which was suspended from the ceiling 19th century desk cabinet . Servants and attendants slept on the floor or on straw palliasses antique oak dressing table with mirror . For information about beds in the time of Elizabeth 1, we look again at William Harrison’s Description of England narrow entryway chest of drawers . In it he wrote: “Our fathers have lain full often upon straw pallets, on rough mats covered with a sheet and a good round log under their heads for a pillow 18 century wooden novelty pipes . If the goodman of the house had purchased a mattress or flock bed, and thereto a sack of chaff to rest his head upon, he thought himself to be as well lodged as the lord of the town, that peradventure lay seldom in a bed of down or whole feathers charles neo classism boulle . As for servants, if they had any sheet above them, it was well, for seldom had they any under their bodies to keep them from the pricking straws that ran oft through the canvas of the pallet and rased their hardened hides inexpensive french desks furniture .”
The “four-poster” bed of antiquity is a well-known term but few have stopped to think that the four-poster, at any rate until the early Georgian period, was in fact only a two-poster, the back or bed-head which supported the top, or tester, being a panelled framework without posts dressoir antique . In the 17th century these beds were known as tester or posted beds staffordshire porcelain rococo revival period . Medieval beds are so rare as to be almost non-existent but there are a number of beds with testers which can be dated from the late 16th century 18th century boulle cabinet . Some of these were excessively large like the Great Bed of Ware, now in the Victoria and Albert Museum antique sideboard styles and makers . It was made about 1595 and is 10 feet 9 inches wide antique gate legged side table . The great majority of beds, however, were between 5 and 6 feet in width art nouveau dresser .
Posted beds all followed a similar pattern, having a strong rectangular frame to carry the mattress and at the head a panelled screen, often elaborately decorated with carving and inlaid woods antique american tilt top pedestal table . This screen and two turned pillars at the foot of the bed supported a panelled ceiling or tester from which hung the curtains, to be drawn at night are william and mary chest of drawers rare? . The pillars at the bed-end were usually incorporated in the bed framework and acted as feet for the mattress franl;ng characteristics of english medieval gateleg table . On larger beds, however, the framing would have separate feet and the posts supporting the tester would be freestanding on rectangular pedestal bases period art nouveau galle bronze table lamp .
Some smaller beds were made with panelled screens erected at the bottom end as well as at the head so that they formed, in effect, large panelled boxes with curtained sides american spoonback armchair . They must have been very stuffy and altogether unhealthy japanned bracket clocks . Whether it was a reaction against the unhygienic properties of the enclosed bed or just a simplification for economy’s sake, a plainer type of bed appeared about the middle of the 17th century 19th century lacquered japanese cabinet with paintings . It consisted merely of a framework on short legs and a low panelled bed-head deco porcelain spanish dancers female . It is usually referred to as a farm-house bed victorian renaissance revival credenza . For those who have an ambition to equip their homes with antique furniture entirely, this type of bed, with a box-spring mattress fitted, can be quite an interesting acquisition wileman/shelley vases . They are not uncommon and I have seen them from time to time in several sale-rooms drop leaf table oak uk antique .
The tester undoubtedly developed from the tent-like covering of the medieval bed and during the 16th and 17th centuries was a very heavy structure which demanded a strong supporting bed-framework cupboard design for keeping cockery . During the time of William and Mary and Queen Anne it became fashionable in the noble households to install beds which were most luxuriously appointed antique chairs 1600 s all wood carved . In keeping with the tendency to build houses with higher ceilings to the rooms, these beds were also very high with elaborately decorated testers and the entire framework upholstered with quilted silk and velvet george jones majolica ware . Such beds were usually installed to commemorate the stay of some royal visitor antique chamber cabinet .
Beds of the mid-18th century became altogether lighter in construction and appearance and although in some cases the bed-head screen to support the tester was retained, the more ordinary run of beds had lower bed-heads and four posts to support the tester arabic style lambrequins . By this time the tester consisted only of four curtain poles placed across the tops of the posts with a light covering of material stretched Over them antique telescopic dining tables . Thomas Chippendale made a bed for the Duke of Beaufort about 1750 in the Chinese taste draw leaf tables . It has a pagoda-like top with flying dragons a6 the corners and, finished in black japan and gold, has a very attractive appearance carved oak draw-leaf refectory table . Another bed, painted in the Chinese manner, was made for David Garrick about 1770 antique oak drop leaf table american . It also has a light wooden tester with embroidered silk curtains and like the bed of the Duke of Beaufort indicates the tendency for greater delicacy in construction of furniture during the second half of the 18th century myott son & co hanley 1880 .
For some time during the 18th-century Italian and French beds were imported into the British Isles and although the numbers were small they influenced the design of the English type considerably regency mahogany settee hairy paw . The Italians seem to have been the first to do away with the tester and its hangings sheraton gateleg card table . Probably in a warm climate common sense overruled fashion and tradition maggiolini furniture . French patterns of the late 18th century were very elaborate in the decoration of bed-heads and here also the tester seems to have been abandoned entirely antique dutch desk . Only in England, and the climate was probably the chief reason for its retention, did the use of the tester linger on into the 19th century end tables tall spindle leg antique . Wooden canopies, from which side curtains were hung, were still being fitted over the bed-head about 1850 19th century english sideboard .
Lightly constructed beds, rather like the folding kind used for camping today, became fairly common during the Georgian period red delft tiles religious 17th century value . They were small enough to be kept under th;, posted beds when not required and were used by nurses or servants attending sick people or as extra accommodation for an unexpected visitor bone handled fork converted to knive . I have seen small chests of drawers with dummy fronts which swung open like a cupboard door antiquegames writing table . Inside were folding beds which could be pulled out when wanted heals pair oak tables . All these lighter types were generally known as truckle beds and were fitted with small wheels or castors so that they could easily be moved around dutch marquetry sutherland table .
I have already mentioned in a previous chapter how chests were used as seats in early times and it is evident that the larger ones also served as beds or couches porcelain wincanton . Some years ago in a sale-room I saw a panelled oak chest with raised ends antique porclean handled sheffeld flatware . Although I did not realise it at the time I had come across an archebanc couchette, probably of early French design which had been made to serve both as a chest and a couch inlay antique serving trays . I have never seen another since and only hope that one day the opportunity to acquire such a rarity might present itself again 17 century dining tables .
From these bed-chests probably developed the more lightly constructed single bed or day-bed which appeared towards the end of the 16th century etruscan pottery oriental . Shakespeare has referred to them in his plays and, by the Restoration, day-beds had reached a pleasing standard of design meissen porcelain antic . They were made in walnut with six or eight legs and had an adjustable end frame which, together with the main framework of the bed, was equipped with woven splitcanework to give some resilience to the overlay cushions types of table legs 19 century . Day-beds with double ends are found occasionally but they are very rare antique perpetual calendar .
The day-bed continued in use throughout the 18th century conforming to the fashionable characteristics of the time, but it is rather difficult to separate its development into that form known as the chaise-longue from that of the settee, couch or sofa corbusier furniture vintage . Although all these types were used for lying or for sitting upon, I think it should be remembered that the day-bed was designed primarily for resting during the day-time while the settee or sofa was made to enable a number of people to sit together on the same seat mahogany kommode . Perhaps the best way to remember the difference is that the day-bed or chaise-longue was never made with a back like a couch or a settee kilian brothers carved fruit and bird inlaid table . In its later form, as used in the 19th and 20th centuries, it has become known as the divan having neither end supports nor back antique table drop leaf raise .
The chaise-longue of the late Georgian and Regency periods became the symbol of elegant repose, typified perhaps by Jacques Louis David’s portrait of Madame Wcamier fauteuil art deco brandt . The beautiful piece of furniture with its gracefully curving ends was said to have been designed by the artist himself value of gateleg tables . It was in all probability among the finest of the adaptations by the late 18th and early 19th-century designers from the sources of classical Greece and Rome sideboard turns into dining table . A shorter form of seat which is often identical in appearance to the chaise-longue is the window seat bassano maiolica . Like the former, it has no back but is too short for reclining upon and as its name implies was just a small seat made to fit into a low window bay without obscuring the view causes of the reign of terror in france .
The type of Victorian sofa which has just the one scrolled end and a short back-piece running only half its length is really in the tradition of the day-bed rather than that of the couch or settee antique bread making cabinet . Those made in walnut about 1850 with small cabriole legs are attractive pieces of furniture and become increasingly rare as time goes on sheffield shovels .
Children’s cots and cradles are really among the few antiques which are not normally put to their original use and would hardly be considered suitable for the modern baby regency waterfall bookcase . Nowadays, babies are put to bed and left to sleep or lie awake as they will but in olden times an essential of all cot and cradle design was that they should be able to be rocked 1930s antique square table . The two swinging cots illustrated have basically the same structure although they are separated by more than 300 years dressoir timber . The Gothic cot is just an oak box suspended from a well-made stand while the late Georgian version, dating from around 1820, is a much finer affair in turned and needed mahogany pollard elm furniture . It has a clockwork mechanism incorporated in the suspension of the cot which will actually cause it to rock for nearly an hour lusterware made in czechoslovakia . It might be that the steady ticking of the clockwork also acted as a further soporific josef originals+ballerinas+value .
The more homely cradle of the farmhouse and cottage had a small hood at one end century furniture chinoiserie dining table chair credenza . It was mounted on a pair of rockers so that the mother could rock the baby to sleep with her foot while her hands were busy with some sewing or the preparation of food metal plates and trays from iran .

Tables, Dressers and Sideboards
Medieval boards and trestles—survival of the term “board”—the Tudor refectory table—pull-out or draw-leaf tables—the cre• dence and origin of the gate-leg table—long period of the gate-leg—occasional joined tables-18th-century patterns with club legs—the composite “D” end table—tripod tea tables with dished and pie-crust tops—dating by shape of feet—early games tables-18thcentury card tables–Sheraton quartette or nest tables—variations of the Pembroke style—sofa tables and early 19th-century folding tables—early dressers—dressers developed from side tables—Welsh dressers—appearance of the sideboard—Victorian chiffoniers mason’s patent ironstone china .
In the communal life of medieval times the servant ate with his master and his place at the table was a kind of status symbol regency revival furniture . The master would sit at the head with his guests and family; next would come the retainers of importance such as the steward and the priest and finally the servants expensive antique plates . Accordingly the table was a very long one and as the great hall was also used for recreation and even for sleeping the table had to be constructed so that, in spite of its size, it could be easily dismantled and put to one side when not required furniture+scallop+wheat .
Tables of the Gothic period were referred to as boards and trestles and were made in a variety of styles edwardian c19th construction buildings . Sometimes the supports were as those illustrated in the Luttrell Psalter and later they took the form of pedestals french words for dinner stand . Until the middle of the 16th century the table top consisted of a massive board of oak or elm boards nailed together 1600 century scroll back chair . When laid over the trestles or pedestals the very weight preserved its stability table consoul antiques caried or gold “rococo” . Even to this day, landladies advertise “board and lodging” and we still speak of a board of directors, a board room and a board of governors flemish trestle table . It is interesting to note how this term, used to describe a council of men and women meeting around a table, is a survival in our language from a very distant past catherine the great of russia plates .
By 1550 the communal life of the hall had begun to disappear john bell, porcelain, value . Houses were being built with a greater number of rooms and master and man took their meals apart kent silversmiths bread basket . There was no longer a need for the long trestle table and so a smaller table with a permanent underframe and legs was taken into general use writing cabinet officers antique . It was probably a smaller adaptation of the joined tables used in the abbey refectories and nowadays the term, refectory table, is used to describe it, although it was a purely domestic piece of furniture types of bureaux .
The refectory table, which was in everyday use from about 1550 to 1660, was usually 8 to 12 feet in length art deco brass stool . It was stoutly constructed with four, six or eight legs with bottom rails between them, and the top permanently fixed 19th century chairs’ . The underframing was made of oak but the top was often of elmwood, because of the wide boards which could be obtained from that tree antique neoclassical .
During the reign of Elizabeth I a variant of the refectory table, known as a draw-leaf table, appeared on the scene earthenware mixing bowls antique with handles . It enabled a comparatively short table to be extended to nearly twice its length by pulling out under-leaves from both ends dinnerware silver tureen . It was a design introduced from Flanders and France and it enjoyed an equal popularity with the refectory table botanical whimsies are considered some of the finest examples of art nouveau glass . Both of these types were displaced by the gate-leg table after the Restoration but the draw-leaf table has been revived during the 20th century and many modern homes possess similar, but lighter versions of the Elizabethan prototype steel dining table germany .
During the second half of the 16th and the early years
of the 17th centuries, table legs were massively made and often took the form of heavy bulbous turnings english creamware marks . On Flemish tables these swollen shapes are often spherical, like a melon, but the English versions were considerably more elongated with rounded tops and bottoms dresden german antiques . It has been said that these bulbous legs were functional in that they were designed to prevent rats climbing on to the table tops ant cherry antique dictionary tables . I have it on good authority from a biologist friend that any self-respecting rat could easily leap on to a table without any climbing aids 19th century gothic bedside tables .
Between 1600 and 1630, a small but sturdily constructed kind of side table was developed antique chippendale “solid mahogany” dining table lions paw . It must be considered a somewhat rare example of early Stuart furniture as examples these days are seldom encountered ernst archibald furniture . The tabletop was of the folding type, that is, it consisted of two halves hinged together and normally kept closed cherry ladies writing desk by pennsylvania house . When required for use, the upper leaf would be opened outwards and this would be supported by a fifth leg, which could be swung out as in a gate-leg table serpentine pembroke table . Actually, this small table was the forerunner of the gate-leg pattern turkish style sideboards uk . It is sometimes referred to as a credence table, which was placed at the side of the altar in the churches and on which the wine vessels and plate were arranged for use in the Communion service antique “trestle table” kent .
The gate-leg table, as already mentioned in Chapter 1, became generally fashionable after the Restoration and, in one form or another it is the one type of table which has been in continuous service ever since art deco polished matte lost-wax castings o nude women in bronze by viennese artisans . Usually made with a gate on each side, some larger tables are to be found with quadruple gates “art deco dresser” and “marble top” . These were of the period when spiral twist legs were in vogue and were made of walnut or, occasionally, of oak louis xv antique french commode .
A small type of side table, with a drawer and bobbin turned or baluster legs, must have been made in large numbers towards the end of the 17th century as they are frequently to be found in sale-rooms and antique shops antique music cabinete with mirror at the top . The finer versions are sometimes veneered and have curved stretchers as illustrated in Chapter 2 federal style table with brass paws . A more common and probably country-made variety is the so-called tavern table with its top overhanging the ends to a more than usual degree trent potteries designs by george jones . The drawers of these tables are sometimes found with joiner’s slides on the sides porcelain wincanton .
After being generally adopted as a dining table during the Restoration period, the gate-leg table was given a variety of leg shapes over the next hundred years rene lalique nude woman art deco lamp . Baluster and spiral twists gave place to scrolled legs and eventually to a type of cabriole shape known as the club leg italian,furniture,maker,address . Except for use on extending card tables, the cabriole leg was not ideally suited to larger table design, but the club leg variation remained in vogue until the introduction of the Chippendale square leg and the tapered legs of the Adam and Hepplewhite eras deco style dressing table .
It was customary during the late Stuart and William and Mary periods for a host to seat his guests at several gate-leg dining tables if the company was a large one sheffield rote iron . By the mid-18th century, however, long mahogany dining tables at which all the company could be seated, began to appear in the more important households antique wood cutlery urns . For over fifty years, these long dining tables consisted of one or several gate-leg tables, with rectangular side-leaves, which were joined together and semi-circular “D” end tables were placed at each end to make up the piece ruhimann table . The wide mahogany boards, introduced during the previous decades, rendered the construction of the broad table-tops a relatively simple matter antiques antique oak sideboards dutch style .
When only a few people were at dinner, the “D” ends would be placed against the wall to serve as side tables and only the gate-leg would be in use new york antiques light art deco . These “D” end tables are quite often to be seen in antique shops, either singly or in pairs, and it is not always realised that they have originally been part of a long Georgian dining table antique mahogany handkerchief table . When placed together, a pair of these tables make a very attractive circular dining table, which would be admirably suited to a present-day flat or smaller modern house http://antcollectors.com . The long “D” end tables continued in use well into the 19th century but the tapered legs were in time replaced by centre pedestals, each supported on four long curved feet antique furniture spanish art nouveaux . These were usually reeded and had brass-capped ends with castors or brass leopard-paw ends wheat antique dresser .
Designed during the closing years of the 17th century, but not becoming generally popular until fifty years later, the small, snap-top, tripod table with a circular top is probably one of the commonest pieces of antique furniture to be found today walnut escutcheons . The hinged top of the simpler country-made examples is usually flat but a tea table with a dished or slightly hollow top is not uncommon reproduced oval shaped dinnig table with lion’s paw . The dished top was designed to prevent spilt tea or milk running over on to the carpet campaign furniture pottery furniture . A more elaborate type of the dished top was known as a pie crust early 19th century mahogany desks with lion feet . Here the edge was carved into a series of scallop shapes, but genuine pie-crust tops are rare and there are many reproductions about value of george iii english mahogany gateleg card table? . Some tripod tea tables have an open, box-like structure fitted underneath, known as a birdcage and into which the single, central pillar is made to fit dutch silver 17th century . With this device, the table top not only folds upwards but can also be rotated so that any dish upon the table may be brought within reach of the guests period antique mahonany dining table with lions paw pedestal legs .
It is possible to date a tripod table, to within twenty years, by the shape of the feet tilt-top birdcage tea table . As illustrated on p small antique pembroke table fold-over . 63, the feet of around 1750 to 1770 have a flatter curve with a wider spread, while those of 1770 to 1790 have a more pronounced hump at the knee antique imari porcelain . From 1790 to 1810 approximately, the curve of the feet was reversed and by the time of the Regency, slender, concave shaped feet had been introduced toilet habits during 1800th century . The early Victorian period saw the revival of the “S” shape, but this was usually rather thick in proportion and decorated with elaborate carving bassano maiolica .
Tables which were specially designed for playing games were rare during the 17th century but an interesting piece, known as a shuffleboard table, is sometimes to be found in the long galleries of our greater country houses 18th century antique american gateleg . The long galleries were built for leisure and relaxation so that during the winter months, while the gentlemen went hunting, the ladies could take more gentle exercise indoors dressing table with small tables . The shuffleboard table can best be compared with a shove-ha’penny board, save that large brass discs were used instead of coins and the table top was often very long rh vase austria . There is one at Astley Hall in Lancashire which has twenty stout legs and is 2712 feet long jennens and bettridge . It must have been prefabricated and then assembled in the long gallery as it is far too large ever to have been brought up the staircase in one piece botanical antique ceramics collectors .
During the reign of Queen Anne and the Georgian period, card games were extremely popular and folding top tables with cabriole legs were in general use during that time finmar alvar aalto stool . These tables were, mostly made of walnut and had small recesses near the edges of the top to hold the guineas or counters while small circular platforms were provided at each corner to hold candlesticks for the night’s play fashion in the 16th century netherlands .
Card tables and tea tables, particularly the folding, semi-circular variety with tapered legs, were made to an almost identical pattern, the only difference being that the games tables had inset baize tops while the tea tables were of polished wood how a goldsmith made a candlestick . The early 19th century saw the production of many small games tables with tops inlaid for chess and backgammon and with drawers beneath to hold the apparatus for the games end tables lions head table with brass eagle claws on legs .
To Sheraton must be given the credit of designing the nest of tables, the idea for which appeared in his Cabinet Directory in 1803 antique kidney shaped dressing table . The nest comprises four small, separate tables which all fit one under another splay leg sofa table . They were originally referred to as quartette tables and being very lightly con-structed and somewhat fragile, it is uncommon to find an original, complete set of four istoriato china . Luckily, I have such a set in my possession which I believe was made by Gillow of Lancaster old gateleg wooden drop leaf tables . It was salvaged from a second-hand furniture shop, the tables being scattered around among the jumble and the shopkeeper having no idea, apparently, that they formed a unique set kakiemon bow price .
Small Pembroke tables with side flaps supported by hinged brackets and said to have been designed originally at the request of the Duchess of Pembroke for occasional use, appeared about 1775 mahogany french dining chairs . They were common in late Georgian homes and in the early part of the 19th century a larger version was made to serve as a supper or breakfast table rectangular drop leaf table antique .
Sofa tables were designed to stand behind a sofa and to carry such things as reading and writing matter, trays of refreshments and candelabras rococo display cabinet . A few years ago, they were fairly common but are now in such great demand as bedroom dressing tables, that they have become a somewhat rare and expensive item pop up cigarette deco dispenser .
The Regency and early Victorian periods saw a vast number of tables with folding tops, made to stand on a central pedestal with three or four feet value of clawfoot cabriole legged dressing table? . In this type, the double top, when opened out, could be rotated so that it was supported by a rectangular underframing odiot tureen . These tables were used for games, writing, serving tea and a whole host of leisure activites french scrolling art nouveau style chairs .
A necessary adjunct to every dining room is a sideboard and to every kitchen or living room, a dresser trestle draw leaf table . The sideboard, as its name implies, was a small side table in those far off days when a dining table was referred to as a board gateleg drop leaf table 19th century . As the piece of furniture we know, it did not appear until the second half of the 18th century 18th century french fashion . The dresser, on the other hand, is of far more ancient lineage and in the painting of the More family by Holbein, referred to in Chapter there is shown in the background a high-backed, canopied Gothic dresser, or, as it was called in that period, a dressoir dutch rococo walnut cupboard . These dressers were really related to the cupboard or buffet and further reference will be made to them in the chapter on Cupboards vintage porcelain plate with brass pedestal .
Dressers with a high back were out of fashion during the early Stuart and Commonwealth times but there were two simpler types in general use aaron burr antique furniture . One was made in the form of a long, narrow side table with three or four deep drawers refectory tables trestle . It stood on four or six legs and had an under shelf, as wide as the dresser top, near the floor level antique epergne glass . This was, no doubt, used for the display of brass and copper ware what were wood tables with porcelain tops used for . The other type was a development of the chest and presented a more solid appearance, the entire front being filled with drawers and small cupboards demilune chiffonier . This second kind of dresser was not generally adopted until after the Restoration but both types were used then until the end of the 17th century drop leaf table with lion claw feet .
By the beginning of the Georgian period most dressers were fitted with a set of plate shelves which stood at the rear of the dresser top poole pottery est. 1873 . This version was usually referred to as a Welsh dresser and while it may have been popular in the Welsh farmhouse kitchen, it was undoubtedly made throughout Britain during the 18th and 19th centuries drop leaf table with spiral turned legs . Occasionally dressers are found made in walnut but more frequently in oak with the edges of the drawer fronts and the cupboard doors cross-banded in walnut or mahogany antique cabinets coat of arms .
Long sidetables were normally used as sideboards in early Georgian dining rooms and on these would be placed the knife and fork boxes with the cellaret for wines underneath antique french ormulu furniture . It was about 1775 that the first sideboards were designed with drawers for the silver and cutlery and deep cupboards on either side to hold the wines boulle table . Sheraton is supposed to have added the low brass rail with a small silk curtain at the back to the designs for bow-fronted sideboards, which had originated during the Hepplewhite period goldscheider staffordshire myott .
In Victorian times, some monstrous sideboards were created with the addition of the most elaborate carving chamber pot cabinet . In the great dining room at Charlecote Park, near Stratford upon Avon, there is installed such a piece of furniture with carved effigies of every variety of edible fish, animal and fowl hanging in great swags from every point and corner chestnut tables antique . This monument to the questionable good taste of the Victorians is all meticulously worked in varnished oak, a spectacle which must have made the shade of Grinling Gibbons sadly shake its head turn a silver tray into a table .
On the other hand, it was during the mid-Victorian period that a very attractive little sideboard, known as a chiffonier, made its appearance antique claw foot table . It was equally useful as a sideboard for a small dining room or as a cabinet for a drawing room fish tail knife 16th century fruit knife 15th . Made in mahogany or veneered with burr walnut, it was certainly one of the more commendable inspirations of the designers during the Victorian era american antique slant front desk .