Posts Tagged ‘copper’

Dishes
Pair of George III oval meat dishes by Frederick Kandler, London, 1765, 73 oz 2 dwt Pair of Victorian octagonal entree dishes and covers with
vegetable dividers for each and ball finials, Sheffield, 1880,
120 oz 14 dwt 450 0
George III circular vegetable dish with ivory grips, pierced sides and four scroll and foliate feet, by W.S., London, 1809, 80 oz 2 dwt 360 0
William IV shaped oblong entree dish and cover with engraved armorials and foliate ring handle, by J. C. Eddington, London, 1835, 61 oz 5 dwt 260 0
George III muffin dish and cover, the domed cover with urn
shaped finial, by Henry Chawner, London, 1791, 15 oz 1 dwt        210 0
Jugs—Cream and Milk
George III helmet-shaped cream jug with ‘bright-cut’ engraving, loop handle and square pedestal foot, by George Smith, London, 1790, 3 oz 7 dwt 80 0
George II cream jug of conch shell type with serpent handle and
three coral-like supports. Circa 1755, 3 oz 5 dwt 80 0
George III oblong milk jug engraved with crests and with gadroon lip and scroll handle, by R. and S. Hennell, London, 1808, 6 oz 2 dwt 70 0
Victorian baluster milk jug chased with flowers and scrolls and on three feet. Possibly by William Brawn, London, 1845, 5 oz 7 dwt 52 0
Jugs—Water
George III pear-shaped hot-water jug, stand and lamp, the jug with rams’ masks and laurel festoons, the stand on three claw feet with female bust terminals, by Andrew Fogelberg. The jug 1776, the stand 1775, 40 oz

780 0
George III vase-shaped hot-water jug, plain with wood handle and on circular foot, by William Fountain, London, 1801, 25 oz 11 dwt 460 0
George II baluster hot-water jug chased with scrolls, leaves and flowers, raffia-covered handle and rim foot, by Gurney and Cook, London, 1755, 19 oz 15 dwt 270 0
Jugs—Wine and Ale
Queen Anne ale jug, die ground embossed with foliage and flowers and a satyr spout, by John Wisdom, London, 1712, 35 oz 280 0
Victorian wine ewer with baluster body and engraved with Grecian figures and leaves, entwined snake handle and butterfly finial, by E. and J. Barnard, London, 1862, 27 oz 11 dwt        170 0
Marrow Scoops
Queen Anne scoop of typical form by Charles Jackson, 1713,
1 oz 10 dwt 68 0
Early George III scoop, the larger bowl engraved with initials,
probably by William Tuite, London, 1767, 1 oz 12 dwt 20 0
Mustard Pots
George III drum mustard with moulded borders, flat hinged lid and simple scroll handle, with spoon of earlier date. Pot by Ernes and Barnard, London, 1813, 5 oz 10 dwt 165 0
some auction room prices : 1968-69
William IV mustard with ribbed baluster body and hinged domed lid with floral finial, scroll handle and shell thumbpiece and spoon of same date but different maker. Pot by C.G., London, 1830, 6 oz 17 dwt
George III oblong mustard with domed cover, urn finial and angular handle on four bun feet, London, 1813, 3 oz 11 dwt
Salts
Four George I plain oval trencher salts with incurved sides, by
Mary Rood, 1723, 6 oz 15 dwt Pair of George III boat-shaped salts, reeded at the lips and
pedestal feet, gilt interiors, by Peter and Ann Bateman, 1792,
4 oz 6 dwt
Pair of George II compressed circular salts, with plain engraved bodies below gadroon lips each on three shell-headed hoof supports, possibly by Isaac Cookson, Newcastle, 1747, 8 oz 1 dwt
Salvers
George II large circular salver on four lions’ mask and shell bracket feet, the shaped border pierced and chased, by George Wickes, 1744, 137 oz
George I plain circular salver on central foot with moulded border, by W.P., 1720, 13 oz 12 dwt
George III circular salver, engraved with initials, chased wave border and gadroon rim, on three claw and ball feet, by Robert Rcw or Rugg, 1766, 24 oz 3 dwt
Victorian salver engraved in the centre with an initial and also with scrolls and foliage, moulded border, by J. and J. Angell, London, 1845, 25 oz 14 dwt
Sauceboats
Pair of George II plain sauceboats each on three shell and scroll feet with gadrooned rims and double scroll handles, by Peter Archambo and Peter Meure, 1754, 29 oz
George II two-handled plain double-lipped sauceboat on collet foot, with double scroll handles and waved rim, with a moulded drop beneath the spout, by Peter Archambo, 1732, 17 oz 5 dwt
Pair of George III sauceboats, each on fluted shaped lozenge foot, with gadrooned borders and double scroll handles, by William Sampcl, 1766, 25 oz
Snuff Boxes—See Small Decorative Antiques Sugar Basins—See Baskets—Sugar Tapersticks—See Candlesticks Tankards
William and Mary tankard on three lion couchant feet, scroll handle, cylindrical body and moulded base, by Robert Cooper, 1692, 31 oz
George II baluster tankard with domed cover, openwork thumb-piece and double-scroll handle, on moulded spreading foot, by William Grundy, 1755, 34 oz 5 dwt 650 0
George III baluster tankard, with domed moulded cover and heart-shaped lower terminal to the scrolling handle, by William Caldecott or Gripps, 1765, 27 oz 15 dwt 570 0
Tea Caddies
George III oval caddy, the body with two bands of bright-cut engraving in beaded borders and the plain hinged lid with urn finial, by Hester Bateman, 1781, 14 oz 10 dwt 900 0
George III shaped oval caddy, the body fluted at intervals, decorated with bright-cut engraving, hinged domed cover with wood finial, by Robert Hennell, 1787, 14 oz 17 dwt 480 0
Teapots and Stands
George II bullet teapot with engraved shoulder decoration of satyr masks, leaves and flowers, straight spout, loose lid, ivory handle and finial, by Isaac Liger, 1729, 15 oz 1 dwt 2,100 0
George III teapot stand on four fluted panel supports, by Hester
Bateman, 1789, 4 oz 15 dwt 280 0
George III oval teapot with moulded girdles and a matching stand, supported on four feet, by Crespin Fuller, London, 1800, 16 oz 15 dwt 270 0
George III oval, semi-lobed teapot, with swan-neck spout, ivory handle and finial, by P. A. and W. Bateman, 1799, 17 oz 3 dwt 170 0
George IV teapot, compressed circular body, ivory handle and
finial, curved spout, by Eley and Fearn, 1823, 25 oz 16 dwt        150 0
William IV compressed circular teapot with moulded girdle, wood finial and similar wood handle, by E. E. J. and W. Barnard, 1830, 14 oz 2 dwt 135 0
Early Victorian bullet-shaped teapot with engraved body, Edinburgh, 1840, 24 oz 82 0
George III oval teapot stand, gadroon border on four panel
supports, but George Fenwick, Edinburgh, 1806, 5 oz 14 dwt 80 0
William IV small melon-shaped teapot, with slightly domed cover and ivory finial, scroll handle and curved spout, London, 1833, 13 oz 18 dwt 60 0
Tea and Coffee Services
Victorian tea and coffee service of compressed circular form, decorated with embossed flowers and foliate handles and on scrolled feet with shell motifs, by Rawlins and Sumner, London, 1838, 72 oz 600 0
George IV three-piece melon-shaped tea service with scroll handles and shell decorated panel supports, by E. E. J. and W. Barnard, London, 1829, 44 oz 7 dwt 500 0
George III circular three-piece tea service with curved lobes, gadroon rims and leaf decorated handles, on paw supports, the pot with rose finial, by John Angell, 1819, 41 oz 6 dwt 380 0
Victorian three-piece tea service of compressed circular form,
the plain ground richly chased, by I. J. Keith, London, 1840, 48 oz
Vinaigrettes—See Small Decorative Antiques Waiters
Pair of George III plain oval waiters each on four shell and beaded bracket feet, beaded rims, by John Scofield, London, 1777, 27 oz
George II plain shaped square waiter on four hoof feet, moulded border, by Thomas Farren, London, 1734, 6 oz 17 dwt
Early George II square waiter with raised border incurved at the angles, 1727, 3 oz 18 dwt
SHEFFIELD PLATE Candelabra and Candlesticks
Pair of candelabra, each for three lights, with reeded scrolling arms, gadroon bordered knops, detachable nozzles and circular bases, 17i in high to centres
Pair of three-light candelabra, the tapering vase stems, circular bases and campana-shaped sconces decorated with chased borders, each fitted with two detachable scrolling branches, one converting to form a

five-light and bearing flame finial, 20 in high
Pair of table candlesticks with V-shaped stems, gadroon shoulders, circular bases and detachable nozzles, llj in high
Pair of table candlesticks with circular bases, vase-shaped stems and gadroon borders, detachable nozzles, 11 in high
Coffee Pots
Vase-shaped coffee pot on pedestal foot with reeded borders, ball finial and wood handle, 13 in high
An oval coffee pot on pedestal base, with reeded shoulder, gadroon borders and angular wood handle, 9] in high
Urn-shaped coffee pot, body semi-lobed between ribbed panels, on pedestal base, ball finial and wood handle, 27 in high
Coasters—Wine
Four circular wine coasters with lobed sides below gadroon lips, the wood bases centred by crested bosses, 5J in diameter
Pair of circular coasters with beaded and ovolo rims, wood bases, 6 in diameter
Caddies—Tea
Two caddies of bombd form embossed with shell motifs Serpentined caddy with hinged lid and beaded borders
Dishes
Set of four entree dishes and covers on heater bases, oblong with scrolling foliate borders, 14 in wide over handles
Pair of entree dishes and covers with gadroon borders and
detachable foliate handles, 11 in wide 22 0
A rectangular entree dish and cover complete with liner, gadroon and leaf borders, wood end handles, on four supports, 141 in wide 20 0
Teapots
An oblong teapot, body semi-Iobed between gadrooned borders, short spout, ivory finial and angular wooden handles, 5J in high 25 0
A compressed circular teapot engraved with swirling leafage,
fruit finial and scroll handle, 5J in high 18 0
Tea and Coffee Services
Oval three-piece coffee service with vase-shaped pot, oval jug and basin decorated with bands of sprays and foliage, 10 in high the pot 160 0
Three-piece tea set with compressed circular bodies, fluted,
foliate collars, scroll handles and foliate panel supports 38 0
Tea Trays
Oblong two-handled tray, engraved with armorials within a chased surround of scrolls and floral sprays, gadroon border, 30 in wide 220 0
An oblong tray, gadroon bordered and reeded end handles
springing from chased foliage, 28 in wide 95 0
Tea Urns
An inverted compressed pear-shaped urn, the body engraved
with a crest, foliate handles and flower finial, 16 in high 75 0
An oviform urn with an applied plain shield, the cover with vase finial, reeded loop handles, on square base with ball feet, 221 in high 45 0
Tureens
Large shaped oval sauce tureen on four feet below heavily
chased floral motifs, detachable liner, 16J in wide 230 0
Pair of oval sauce tureens and domed covers with gadrooned rims, decorated with acorns and oak leaves at the handles, 8Ј in wide (end handles missing from one tureen) 120 0
Wine Coolers
Set of four coolers, the campana-shaped bodies engraved with contemporary armorials above lobing reeded handles and gadroon borders, on pedestal bases, 9i in high 520 0
Pair of coolers with campana-shaped bodies, reeded handles and
on pedestal bases, 9J in high 200 0
NON-PRECIOUS METALS
Brass
Pair of eighteenth-century andirons, with spherical finials, and
masks, 29 in high 100 0
SOME AUCTION ROOM PRICES ! 1968-69
A club fender
A Corinthian column floor standard
An embossed fire kerb
A two-handled log tub on paw feet
An alms dish with lobed centre and inscription border, the rim
with punched rosettes, 15} in diameter Pair of spirally-turned candlesticks on domed feet, 20J in high A hanging oil lamp Pair of chambersticks, with snuffers A heavy log tub with lion mask handles on paw feet Brass

and steel semi-circular fender
An oval fire insurance plate with a crest of a stag, dated 1774 Pair of carriage lamps A helmet coal-scuttle
A warming-pan with turned wood handle Pair of baluster candlesticks, 9 in high
Bronze
Figure of a racehorse and jockey after Isadore Bonhcur, I0j in
high
The Capture of Alexander by G. Halse. Two warriors hold a
struggling youth. Signed and dated 1860, 24 in high Eighteenth-century Italian figure The Dying Gladiator signed
Canova
Figure of a dancing fawn, holding up a bunch of grapes and
balanced on his left foot, 14 in high Figure of an infant satyr playing a set of pipes, 9j in high Pair of busts of Henry IV and Sully, three-quarter length, both
wearing ruffs and decorations, on rouge marble socles, 20} in
high
Pair of Art Nouveau winged figures stamped A. Moreau, 9J in
high
Pair of five-light candelabra on bulbous stems Italian figure of Venus, 7 in high
Copper
Early nineteenth-century tea urn on a square base
A street lamp
Three large saucepans (one with lid) Two coal scuttles A large kettle
Coal helmet with swing handle
Large two-handled urn and cover
A copper and brass tea urn with tap
A long turned wooden-handled warming-pan
Iron and Steel
Steel and brass basket grate with pierced frieze and baluster
uprights, 20 in wide Seventeenth-century Sussex wrought-iron fireback, 2 ft 10 in
by 1 ft 8 in and a log fork Wrought-iron shaped fire-back Regency iron and brass stick stand on paw feet
Victorian cast-iron corner stick stand 5 10
Victorian cast-iron oil heater 3 10
Pewter
A charger with secondary touch of Thomas Lanyon, circa 1730,
20 in diameter 36 0
Five quart tankards 35 0
A four-branch candelabrum, 24 in high 22 0
Eighteenth-century circular charger, 20 in diameter 22 0 Pair of altar candlesticks, baluster-shaped stems on triangular
bases, 20 in high 16 0
Pair of baluster and cup candlesticks, 18 in high 15 0
A hot-water meat dish with two handles and a grill, 22 in wide 15 0
A travelling chamber-pot, stamped Jas. Dixon 14 0
Two tankards and a mug 6 0

CLOCKS, WATCHES AND BAROMETERS Bracket Clocks
Repeater clock by Edwardus East with signed and engraved
backplatc in cboniscd case 600 0
A three-train musical clock by Moore of Ipswich with eight tunes in ebony case with gilt metal mounts in mid-eightccnth-century style, 2 ft 2 in high 440 0
George III fruitwood clock by Recordon, late Emery, London, with painted dial and frets at side and front of case, 1 ft 2 in high 290 0
George III walnut clock, the dial signed Joseph Smith, Chester,
and of pronounced Continental character, 1 ft 6 in high 210 0
George III ebonised clock, the 7-in dial signed William Smith, with calendar and strike/silent dial. The movement is contained in an inverted bell-topped case, 1 ft 4 in high 190 0
Louis XV contra-boullc clock with enamel dial signed Darmezin, Paris, and movement signed Crepaux, Paris, in cartouche-shaped case, 3 ft 1 in high 190 0
Louis XV Boulle clock by Pcrrache, Paris, with an enamelled dial, the case surmounted by a youthful figure of Jove, richly mounted in ormolu, 2 ft 6 in high 170 0
George III mahogany clock by Massey, Bridge Road, Lambeth, the circular white-painted dial with a central calendar hand, 1 ft 4 in high 140 0
George III mahogany clock, the 7-in circular dial signed Lamb and Webb, London, with calendar and engraved backplate in bell-top case, 1 ft 4 in high 120 0
Mid-eighteenth-century veneered ebony clock signed John Small-wood, Lichfield, with pull quarter repeat, 1 ft 4 in high (later dial) 85 0
George III mahogany clock, the 8-in arched silvered dial signed Gravell and Tolkien, London, with engraved backplate and tic-tac escapement in broken arch-topped case, 1 ft 6 in high 60 0
Regency rosewood clock signed on dial John P. Smith, 1 ft 3 in
high 20 0
Carriage Clocks
Clock in gilt case by James McCabe, London 675 0
Repeating French brass clock with white dial signed Gibson
and Co Ltd, Belfast, 6J in high 68 0
French brass clock with white dial signed Rowel, Oxford, 4Ј in high
Repeating brass clock with white dial and glazed brass case, 5 in high
Gilt metal timepiece, the glazed case with pierced floral frets at the sides and front, 5 in high and with travelling case
Miniature silver-cased repeating clock with white dial. The case stamped J. Keller, 3J in high
Lantern Clocks
Brass clock with engraved copper dial and an alarm disk, 1 ft 1 in high
Late seventeenth-century brass clock, the dial engraved with flowers and with pierced dolphin cresting, 1 ft 3 in high
Longcase Clocks
Late seventeenth-century marquetry clock, the 11-in dial signed Robt. Williamson, London, with calendar aperture in a walnut case inlaid with shaped panels of birds and flowers, with a bullseye in the waist door and with spirally turned columns at the corners, 6 ft 7 in high (frieze of a later date)
Tall mahogany cased clock with chimes. The elaborately foliated brass dial with a silvered chaptered ring. The case inlaid with classic urns in coloured woods, the arched hood has brass spires and the waist has a bevelled glass door
A carved mahogany cased clock with a grotesque satyr mask to the hood over a brass floral scrolled dial. Westminster, Whittington and St Michael chimes, 7 ft 7 in
Mahogany clock made by Manley of Chatham
Eighteenth-century walnut clock with domed canopy and brass face, the movement by William Stapleton, London, 7 ft 4 in high
Walnut clock, the early eighteenth-century movement signed
Andr. Dunlop, London, the 12-in dial with chestnut and
flower spandrels, 7 ft 4 in high Georgian lacquer clock with brass face and striking movement.
The case, with ‘bullseye’ door, decorated with gilt chinoiseries
on a simulated tortoiseshell ground Eighteenth-century small clock by John Lee, Gookham; with
brass dial and foliated spandrels, in a black lacquer case
decorated with chinoiseries in red and gill
Mantel Clocks
An ormolu clock, the painted dial signed F. Linke, Paris, the movement in a glazed case in well chiselled ormolu with drapery, acanthus leaves and groups of fruit and ending in double cloven-hoof feet, 2 ft 11 in high
Bronze and ormolu mounted clock, the movement contained in a drum upon which is seated a Chinaman holding a parasol, the whole on the back of an elephant, 1 ft 4 in high
A French clock, inscribed Bonniere a Clermont, in a rococo porcelain case. The blue and gilt ground painted with musicians, lovers and flowers. On a similar stand
Louis XVI marble and ormolu clock, the striking movement with enamel dial signed Hessen. The arched architectural case with drapery festoon, pineapple finials, an urn and fluted columns, 1 ft 5 in high 110 0
Regency rosewood clock, the movement by Dwerrihouse &
Carter, Davies Street, 2 ft high 70 0
Philippe clock with glass panels in gilt metal case with corinthian columns and surmounted by an urn. Decorated with coloured enamels, 18 in 68 0
An Empire marble clock mounted in ormolu, the movement with outside count-wheel, the dial surmounted by a white marble urn and suspended between fluted columns capped by ormolu pineapples, 1 ft 4 in high 55 0
Watches
Gentleman’s 18-carat gold half-hunter watch 20 0
Early nineteenth-century verge watch by D. Nevern, in a tor-
toiseshell case, the dial enamelled with a wharf-side scene 13 0
Gentlemen’s 18-carat gold pocket watch by George Harvey,
Wellington 13 0
George III verge watch by William Fowler, London, in a silver
case, London 1783 9 0
Nineteenth-century verge watch by Nicoll, Great Portland
Street, in a tortoiscshcll case 7 10
Barometers
Early   Victorian   mahogany  stick   barometer  by  E. Davis,
Shrewsbury, 3 ft 3 in high 70 0
Regency rosewood inlaid with mother-o’-pearl banjo barometer
and thermometer 46 0
George III mahogany banjo barometer and thermometer with engraved scales by A. M. Ortelli, Godalming, the case outlined with fruitwood lines, 3 ft 2 in high 38 0
Georgian mahogany stick barometer and thermometer by Rout-ledge, Carlisle 38 0
Mahogany stick barometer and thermometer by Salmon, Bath 38 0
A Regency rosewood banjo barometer and thermometer by
Aprile Sudbury 34 0
Early nineteenth-century mahogany banjo barometer by Lione and Tarone, London, with a thermometer and the case inlaid with Prince of Wales plumes and a whorl pattern, 3 ft 2 in high 30 0
Early nineteenth-century mahogany banjo barometer by A.
Celti, Reading, the case inlaid with shells, 3 ft 2 in high 22 0
SILVER
(Troy weight: 20 pennyweights [dwt] = 1 ounce [oz])
Baskets for Bread, Cakes, Fruit, Sugar or Sweetmeats George II oval-shaped cake basket on four cherub mask and scroll feet. The sides pierced and engraved with flowers and
scrolls and the base engraved with a coat-of-arms, by Paul
Crespin, 1753, 62 oz 3,600 0
George III oval pedestal cake basket by John Ernes, London,
1804, 24 oz 10 dwt 400 0
George III boat-shaped pedestal sugar basket with engraved border, reeded edge and swivel handle by Peter, Ann and William Bateman, London, 1793, 5 oz 10 dwt 320 0
Victorian oval basket, the pierced panels embossed with beading
and garlands, London, 1895, 19 oz 62 0
Candelabra and Candlesticks
Pair of George I dwarf table candlesticks, the baluster shafts upon square terraced bases by William Darkeratt, 4J in high, London, 1726, 20 oz 1,500 0
Victorian tabic candelabra with two tiers of six scrolled branches issuing from a bold Corinthian column supported on a square terraced foot, with neo-classic rams’ mask and husk swags by R.H. over R.H., London, 1877, 30 in high 355 0
Pair of George III table candlesticks, the tapering baluster shafts upon half-fluted circular bases by John Green & Co, Sheffield, 1800 195 0
George III chamber candlestick and snuffer, the gadrooned edge
witli shell motif by William Cafe, London, 1761, 12 oz 130 0
Casters
Garniture of three George II vase-shaped sugar casters of plain
design by John Delmester, London, 1758, 15 oz 10 dwt 930 0
William IV Scottish baluster caster engraved with a crest above floral decoration on a granulated ground, by Elder & Co, Edinburgh, 1832, 4 oz 7 dwt 90 0
George III baluster caster with pierced cover and wrythen
finial, by Thomas Satchwell, 1780, 2 oz 4 dwt 85 0
George III vase-shaped caster the otherwise plain body engraved with contemporary crest. The mark of George Giles struck over another, 1783, 2 oz 8 dwt 65 0
Coasters—Wine
Set of four partly fluted circular coasters with gadrooned rims and engraved with crests by John & Thomas Settle, Sheffield, 1818 410 0
Pair of George III coasters with pierced waved galleries, London, 1794 270 0
Pair of William IV circular-shaped wine coasters with foliate borders and crested silver bosses to the wood base, by Henry Wilkinson & Co, Sheffield, 1831 150 0
Pair of George III coasters with beaded rims, the pierced sides stamped with arcading, urns and laurel festoons, maker’s mark missing, 1794 100 0
Coffee Pots
George I small plain cylindrical coffee pot with octagonal spout and low domed cover with baluster finial, by Paul De Lamcrie, London, 1725, 11 oz 3 dwt 1,900 0
George II baluster coffee pot, plain with foliate decorated spout, wood handle and hinged domed lid, probable maker Fuller White, London, 1759, 21 oz 1,350 0
Late George III tapering cylindrical coffee pot, the plain body engraved with contemporary armorials and a crest, by Peter, Ann and William Bateman, London, 1802, 35 ox 2 dwt 1,200 0
George IV coffee pot, vase-shaped, with moulded bands at the neck and waist, leaf-capped scroll handle and foliate finial on lid, by Pearce & Burrowes, London, 1826, 22 oz 5 dwt 210 0
Victorian vase-shaped coffee pot engraved with key pattern
decoration, London, 1872, 24 oz 135 0
Cruets
George II five-bottle cruet frame on four shell feet with detachable baluster handle. Five cut-glass silver-mounted bottles. By Jabez Daniel, 1750, 28 oz 7 dwt 105 0
George III cruet frame for six bottles with reeded loop end handles, ring holders, on four feet. Five glass bottles all chipped, one broken. By Henry Chawner, London, 1792 16 0
Cups and Goblets
Elizabeth I secular wine goblet, the bowl decorated with tulips and strapwork motifs, on a slender baluster stem and circular fluted foot, London, 1593, 5 oz 10 dwt 2,000 0
Pair of George III goblets of plain design, probably by William
Sumner, London, 1800, 20 oz 520 0
Pair of George III two-handled pedestal challenge cups and covers with reeded decoration and urn knops, by Samuel Hcnnell, London, 1806, 32 oz 5 dwt 400 0
George III tumbler cup engraved with armorials, gilt interior and the base with contemporary initials. Possibly by John Garter, London, 1766, 2 oz 1 dwt 150 0
Victorian wine cup, the beaker-shaped bowl and pedestal base cast and chased in low relief with grape-laden vine tendrils, by Hunt and Roskell, London, 1875, 10 oz 1 dwt 52 0
Cutlery—Canteens
George III fiddle thread pattern table silver: 24 tablespoons, 36 table forks, 12 dessert spoons, 12 dessert forks, 12 teaspoons, 6 sauce ladles, 2 soup ladles, 1 marrow scoop, majority by Richard Crossley, 1798/1800/1804, 146 oz 9 dwt 750 0
Victorian fiddle pattern table silver: 12 tablespoons, 12 table forks, 12 dessert spoons, 12 dessert forks, 6 teaspoons, 2 salt spoons, by George Angell, London, 1863, 116 oz 14 dwt 260 0
Cutlery—Forks Dessert
Twelve George I  three-pronged  forks with crest, different
makers, 1718, 14 oz 1 dwt 1,500 0
Twelve George IV fiddle pattern forks by James Scott, Dublin,
1822, 15 oz 75 0
Six George III fiddle pattern forks by G.D., London, 1794,
8 oz 14 dwt 65 0
SOME AUCTION ROOM PRICES ! 1968-69
Cutlery—Forks Table
Twelve Queen Anne three-pronged forks engraved with a crest,
by David King, Dublin, 1708/10, 28 oz Four George II three-pronged forks engraved with two crests,
1755, 7 oz 18 dwt Eleven Victorian fiddle shell pattern forks by George Angell,
1857/61, 36 oz 16 dwt
Cutlery—Forks Toasting
George III fork with knopped shaft and scrolled handle, probably by R. Preston, London, circa 1767, 7 oz 10 dwt. 17f in long
George III fork with knopped shaft and scrolled handle by John Deacon, London, circa 1775, 8 oz. 19i in long
Cutlery—Knives
Forty-eight Victorian table knives and twenty-four dessert knives, kings pattern, steel blades by J.A. or T.S., 1884
Twelve eighteenth-century dessert knives, the multi-faceted bloodstone handles with knopped urn finials and mounts engraved, the scimitar blades of steel. Circa 1700, (Some handles cracked)
Cutlery—Ladles
Four George III sauce ladles, crested Old English pattern by
Hester Bateman, 1783, 5 oz 19 dwt Pair of George III sauce ladles with ribbed and punched beaded
bowls, by Michael Keating, Dublin, circa 1780, 2 oz 16 dwt
Cutlery—Spoons Dessert
Nine engraved spoons, seven by William Soame, 1741, two 1748, 12 oz
Ten Hanoverian spoons engraved with crest, 1760, 11 oz 5 dwt Cutlery—Spoons Serving
Pair of George III Old English pattern spoons by Steven Adams,
London, 1772, 5 oz 15 dwt Pair of Victorian spoons by George Angell, 1854, 10 oz 14 dwt
Cutlery—Spoons Table
Six George I Hanoverian pattern spoons with rat-tail bowls
by Charles Jackson, 1723, 11 oz 2 dwt Six George III Old English pattern spoons with contemporary
initials J.G. by Hester Bateman, 1780, 11 oz 17 dwt
Cutlery—Spoons Tea and Coffee
Six William IV ‘bright-cut’ spoons, 1836, 3 oz 7 dwt Eight George IV fiddle shell pattern spoons by J. McKay, Edinburgh, 1827, 4 oz 8 dwt

THE TRIUMPH OF THE GIRANDOLE
The other most characteristic form of earring of the i 8th century was the girandole, which was fashionable throughout the whole of Europe. In the early
j 8th century it tended to have a horizontal shape, the three drops more or less of the same size and at the same level, and the central motif clearly defined and simple in design. Later it became more vertical in emphasis with a longer and larger central drop and a more elaborate central motif.
Above and opposite right: Late i 8th-century girandole earrings from Spain, set with emeralds and diamonds, a characteristic feature of Spanish jewellery. The elaborate central motif combines leaves and spray of flowers.
Centre top: French, circa I 76os, set with foiled rubies and diamonds, the drops and the central motif articulated. The combination of rubies and diamonds and the elaborate bow motif place it in the second half of the century.
Middle: English, second half of the T 8th century, set with foiled garnets. Note the rather stiff design and the clearly defined ribbon motif. The colour of the garnets is enhanced by bright pink foiling.
Bottom: Portuguese, circa 1750, set with foiled topazes. The choice of the gemstones — topazes from Brazil, then a colony of Portugal — and the linear and flat design are typical of Portuguese jewellery.
THE ELEGANT PENDELOQUE
A collection of late i 8th-century silver and diamond pendeloque earrings. These examples show some of the many variations of the pendeloque design, from the cluster, ribbon bow and pear-shaped drop (right and opposite above) to the articulated and elaborate swing centre (centre and opposite below). Note the use of silver as setting metal to complement the whiteness of diamonds. As is normal at this time, all gemstones are mounted in closed settings.
IBERIAN STYLE
Right: A gold and hessonite garnet earring, Catalan, probably early i 9th century. The striking design is a development of the traditional pendeloque design with a cluster surmount, an elaborate floral spray centre and an elongated pear-shaped drop. Many examples are extremely long and heavy, requiring special mounts to support their weight.
Opposite right: A collection of i 8th- and i 9th-century gold earrings, Portuguese and Spanish. These earrings exemplify the persistence, in the Iberian peninsula, of the pendeloque motif based on
surmount, ribbon bow and elongated drop. The great variety of design includes the traditional pendeloque conceived as a cluster surmount set with emeralds or rose diamonds supporting a bow and a pear-shaped drop; the ‘Brincos a Rainha’ with its wide, almost circular, drop with swing centre, entirely pierced in high carat gold; the elongated spindle-shaped earrings chased in gold with scroll motifs known as ‘Fuso’, and the bow pendants (centre of page).
Detail of a portrait of Mary, Countess of Macclesfield, by Francis Coates, exhibited at the Society of Artists in 1763 and much admired by Horace Walpole. The Countess is wearing fashionable diamond girandole earrings.
REFINEMENTS OF THE 18TH CENTURY
Opposite far left: A Portuguese silver and white topaz earring of girandole design, first half of the i 8th century, and (below) front and back view of a diamond girandole earring mounted in silver. The back view shows three typical features of the girandole: the closed setting of the stones; the articulated and detachable drops that allow the earring to be worn in a reduced form; and the additional hoop, through which a ribbon was threaded and secured to the hair.
This page:
Illustrations from 18th-century literature on earrings. Top: An extract from the ‘Discours Preliminaire’ of the Recueil des Dessins by A. Duflos, 1744, where the author expresses his concern about the excessive weight and elaborate design of girandole earrings. Above, left to right: French engraved designs of two girandole earrings and one pendeloque earring by F. LeFebvre (active circa 1635-57); a page of French engraved designs for six girandoles by Pouget, 1762; six engraved designs for pendeloques and girandoles by J. Quien, 1710, published posthumously in London in 1762; and two designs for a two-stone or double-cluster earring, by Duflos, 1744, a fashionable form that cannot be classified as either girandole or pendeloque.
Centre left: A page of French designs by Maria,
175 1-70, engraved by Babel, illustrating fashionable pendeloques and girandoles.
Below left: Four engraved designs for pendeloque and girandole earrings, by an anonymous Italian, circa 1770.
THE PENDELOQUE: Centre right: An unusual and colourful pair of earrings, late T 8th century, set with
THEME AND VARIATIONS cornelian plaques within diamond borders.
Right: A pair of diamond pendent earrings, Russian, mid-i 8th century. The interest in large cushion-shaped brilliant-cut diamonds mounted in closed silver settings is a typical i 8th-century feature.
Opposite: Four pairs of pendeloque earrings mounted in silver or gold and silver with colourless gemstones such as white topazes and rock crystal.
Opposite far right: A pair of diamond pendeloque earrings, English, late i 8th century. Note the large rose diamonds in silver closed settings and the rather severe design typical of many English creations of the time. And (bottom far right) a pair of topaz pendeloque earrings and a matching devant de corsage, Portuguese, mid-i 8th century, interesting for its combination of light yellow and foiled orange stones.
Below: A collection of English diamond jewellery, late i 8th century, comprising typical pendeloque earrings and a flowerhead dress ornament.
OUT OF THE MAINSTREAM
Below: A mid i 9th-century portrait by Joaquin Argasot y Juan of a Spanish lady wearing a pair of large gold and gem-set earrings of girandole inspiration, proving how long earrings of this type continued to be popular in the Iberian Peninsula. Their size explains why additional fittings were required.
Right: Silver and rose diamond pendeloque earrings, probably Flemish; and gold Iberian earrings set with topazes, of modified girandole design, similar to those in the portrait above.
Opposite, top left to bottom right: Gold and gem-set Spanish earrings, a variation of the Catalan type but with a much more slender outline; Catalan earrings; gold Iberian earrings set with emeralds; and garnet Catalan earrings. All on this page late i 8th/early i 9th century.
PEARLS, GEMS AND GLASS
Below: A pair of seed pearl and ruby girandole earrings, Southern Italian, mid-18th century. The use of minute seed pearls threaded on a filigree structure is a typical feature of many Southern Italian and Adriatic jewels of low intrinsic value. Even so the design presents the most typical features of the girandole: cluster surmount, bow and detachable drops.
Opposite: A pair of gilt-metal and glass girandole earrings, probably Italian mid- i 8th century, using copper coloured aventurine glass with gold spangles cut and faceted as if it were a precious stone. Glass paste of various colours was frequently cut and set in i 8th= centuryday jewellery, and even aristocratic ladies who owned precious jewels did not disdain to wear it. The smaller pictures show two pairs of Iberian earrings set respectively with rose diamonds and emeralds, late i 8th century. One is modelled on the traditional girandole, the other on the pendeloque form, which in this region retained their popularity well into the 19th century.
A pair of spectacular Southern Italian gold and seed pearl pendent earrings, late i 8th century. Although this particular type seems to be confined to Southern Italy and the Adriatic regions, its structure conforms to the contemporary pendeloque design. The use of seed pearls had been a typical feature of jewels of this area since the I 7th century, providing an extremely successful and decorative alternative to jewels set with precious gemstones.

Bracket Clocks
The backplate continued to be engraved, usually with such fashionable motifs as foliate scrolls and flowering urns.
In France curvaceous, asymmetrical forms were Popular from the 1690s, typified by the waisted bracket clock with its inward-curving case and matching wall bracket. Extravagant inlay with exotic materials was typical until c.1750, as were tortoiseshell veneer and gilt mounts; ormolu, lacquer, and porcelain were all popular, with ornate asymmetrical scrolls, shells, and flowers. From c.7750 to c.1800 more restrained lines and rustic, sentimental, and Classical motifs prevailed. Dials on most early 18th-century examples have an enamelled centre, with enamel plaques for numerals this is called a 13-piece dial; from the mid-18th century clockmakers used a one-piece, white, enamelled dial.
Early bracket clocks
The invention of the pendulum in the mid-17th century Trade possible the production of spring-driven clocks with a short pendulum, designed to stand on furniture, shelves, or wall brackets. These clocks, often portable, are usually known in Britain as “bracket” clocks, although few few were actually made with matching brackets; they are also known as “mantel” or “table” clocks. The cases and dials of early 17th
and 18th-century examples largely follow those of contemporary longcases.THE 17TH CENTURY
The earliest bracket clocks, made from the 1660s mostly in England, have cases veneered with ebony, walnut, or olivewood, a pediment-shaped or domed top, a brass carrying handle, bun or block feet, and pierced wooden panels or frets at the sides and/or the front, which were backed with fabric so that the striking mechanism could be heard. Damaged delicate wooden frets were often later replaced by glass panes. Some examples have gilded or silver feet, pierced (known as “basket”) brass tops and frets, and tortoiseshell veneer. The square brass dials often feature an applied, silvered chapter ring, spandrels in the form of winged cherubs, and blued-steel hands. Most 17th-century (and 18th-century) bracket clocks are of eight-day duration, strike the hours, and have a verge escapement; some were converted to the more accurate anchor escapement in the 19th century. Backplates were often engraved with Dutch-inspired tulips and leaves.
French 17th-century bracket clocks are usually more ornate than their English counterparts. One of the earliest forms was the pendule religieuse or Louis XIII clock, with tortoiseshell inlaid with silver and brass, gilt finials, and often gilt acanthus leaf swags or scroll mounts. From the 1690s French examples featured white enamel plaques for each numeral on the dial, on a velvet ground. Dutch clocks also featured velvet-covered dial plates, but their cases — typically in ebony — are plainer.
THE 18TH CENTURY
Bracket cases were usually veneered with walnut or ebonized until c.1730, and veneered with mahogany thereafter. Arched brass dials were introduced c.1715, with calendar work or strike/silent dials in the arch,
and an applied, silvered chapter ring. Some 18th-century examples have quarter-hour as well as hour striking and often a repeat mechanism, operated by a cord.
• CASE designs are similar to contemporary furniture and longcase clocks; British clocks tend to have wooden cases; French cases use a variety of materials
• MOVENIENT early bracket clocks have verge escapements: these were sometimes converted to anchor escapements an d if so the apron over the pendulum rod may be missing or the pendulum bob
will be disc-shaped instead of conical; some clocks were reconverted back to verge, often with a new apron in a style different from the rest of the clock
• ALTERATIONS finials and feet arc often missing or replaced in a different style; delicate wooden frets may have been replaced by glass
• COLLECTING clocks with a matching bracket are fairly rare and so especially collectable; original escapements are desirable; early clocks are highly sought after
Later bracket clocks
Although the longcase clock went into decline in the early 19th century, the bracket clock remained popular. The majority of 19th-century European bracket clocks are typified by elaborate case design in a variety of styles. The clock industry expanded in the USA, and from the 1840s mass-produced, inexpensive American bracket clocks, or “shelf” clocks, were imported into Europe, contributing to increased competition but ultimately to a decline in the European industry, especially in Britain.
REGENCY BRACKET CLOCKS
From the 1790s to the 1820s British bracket clocks were produced in diverse styles, from the satinwood-veneered “balloon” case, similar to the French waisted style, to the chamfer-top case. The chamfer-top style has a flattened pediment top, influenced by the contemporary Greek Revival style in architecture, and is crowned by a cast and gilt finial. Cases were usually veneered in mahogany or rosewood or ebonized, often with brass strip inlay in delicate scrolling designs. From the end of the 18th century bracket clocks were usually kept in one position rather than transported around: for this reason they often no longer had carrying handles at the top, although most chamfer-top clocks have ornamental brass ring handles on the sides, often held by lion masks.
The large, round, convex dials are among the easiest of faces to read: made of silvered brass, painted iron, or white-enamelled copper, they are usually very plain except for the maker’s signature. The simple brass or blued-steel hands are typically pierced or feature ornamental spade or heart tips. The movement is spring-driven with an anchor escapement.
VICTORIAN BRACKET CLOCKS
By the mid-19th century novelty of case design was all-important. The numerous revival styles, especially the Gothic Revival, were particularly influential. Gothic Revival clocks, popular between the 1830s and 1850s, have the same basic form as Regency clocks, but the dial plate is in the shape of a pointed arch, the fretted side panels imitate Gothic tracery, and cluster columns, copied from medieval architecture, ornament the corners. In contrast to the simpler Regency forms Victorian clocks tended to be elaborately decorated with heavy carving and mounts. Some featured complex striking mechanisms, with chimes on bells, and gongs on the quarter hour. Substantial three-train chiming “director’s” or “boardroom” clocks arc typical of the high Victorian period.
Dials were made in a wide range of materials, including plain or silvered brass and painted iron; the use of Arabic numerals was common from c.1870.
It is unusual to find a Regency bracket clock with its original
matching bracket. Many chamfer-top clocks of this type were made in mahogany or rosewood, but this example has an ebonized wood case. Brass strip inlay, bun feet, pineapple finials, and large, round, white-painted dials are typical of early 19th-century British bracket clocks. (c. 1820, ht excluding bracket 4Bcmll9in; value H)
of the retailer, although the best makers also sold their own clocks. The British clockmaking industry gradually declined from the 1840s owing to growing imports of mass-produced American and German clocks, but fine bracket clocks were made in Britain until World War I.
AMERICAN SHELF CLOCKS
Large-scale production of clocks first began in the early 19th century. Although many were exported to Europe, most surviving examples are found in the USA, where they are popular with collectors. Connecticut-based Eli Terry ( 1772-18-52) was the first to produce inexpensive movements, mostly of wood, using slick production methods and standard parts. In the 1830s Chauncey Jerome (1793-1868) invented 30-hour duration movements from rolled brass, which were both easier to make and more reliable than wood.
Although less expensive materials were used for American cases than European ones, designs were just as varied. Most carcasses were softwood veneered with mahogany, with a maker’s label on the interior, and thin, sheet-metal or wooden dials painted white. Clocks were simply designed to meet functional domestic demands, and used little brass so as to keep costs down. Notable designs were the “pillar and scroll” clock (until c.1830), with elegant side pillars, a scrolled pediment with finials, and simple, scalloped feet and skirt; the “three deck” design, with the case divided into three and decorated with half columns at the sides; the “acorn” style, with a wide, curving trunk; and the “steeple” clock, with a pointed gable and pinnacled side pillars. Most clocks are embellished on the front door with verre eglomise (reverse-painted glass) panels. At the end of the 19th century many American makers copied French marble mantel clocks, using imitation marble of enamelled iron or painted wood; some cases were of papier-mache inset with mother-of-pearl and painted with floral designs.
Regency bracket clocks
• HANDLES many examples have brass side handles, commonly with lion mask or cornucopia mounts
• CASES a variety of styles was produced but most were made of mahogany or rosewood with ball or bracket feet; the best examples have brass strip inlay in scrolling or floral designs
• DIALS most arc round and convex, and of silvered brass, white-painted iron, or enamelled copper; hands, plain or pierced, arc of simple, elegant design
Victorian bracket clocks
• CASES designs are varied, since originality of case was sometimes considered more important than the movement or any mechanical refinements; cases for chiming clocks were elaborate and heavily carved
• DIALS Arabic numerals were popular from c.1870; any name is often that of the retailer rather than the maker
American shelf clocks
• CASES most are softwood, veneered with mahogany; styles are varied but the majority of cases arc decorated on the front with verre eglomise panels
• DIALS these are usually of wood or metal, painted white; dials were not usually signed – instead a label with the maker’s name was usually pasted to the case
• MOVEMENTS early clocks have wooden movements with steel pivots; thin rolled brass was used from 1830s
FRENCH BRACKET AND MANTEL CLOCKS
The late 18th to early 19th century was a great period for French clockmaking, and a tremendous range of clocks was produced, some of them highly sophisticated. The work of the casemaker was as important as – and sometimes more important than – the complexity of the movement: cases are typically made of marble or bronze, embellished with rich gilt-bronze (ormolu) mounts, and generally more ornate than those on British examples. Most such clocks were made in Paris and reflect the influence of the Neo-classical style; ornamental motifs include Classical urns, vases, palmettos, festoons, and swags. One notable design – intended to illustrate the technical sophistication of the clock – is the lyre clock, which features a central gridiron pendulum with metal rods like the strings of a lyre. The multiple rods that form the gridiron pendulum expand and contract at different rates and in varying directions with changes in temperature, ensuring that the length of the pendulum remains constant and the clock highly accurate.
Most late 18th-century French mantel clocks feature round, convex dials, usually enamelled in white with black numerals. A few rare and highly collectable clocks produced in the 1790s have Revolutionary dials: in 1793 the Revolutionary government decreed that clocks and watches should show decimal time, with ten hours in a day and one hundred minutes for each hour. This system was, however, very short-lived.
Classical influences continued into the Empire period, but case designs became ever more ornamental and elaborate. Some were miniature replicas of the furnishings of the period, with figures in Grecian dress stated at tables or with musical instruments.
As industrial production was encouraged by the French government, mechanisms were increasingly standardized – most were fitted with an anchor escapement.
A huge variety of clocks was made in the mid- to late 19th century. A distinctive French design of the second half of the 19th century was the mass-produced, black marble mantel clock, assembled from pre-shaped marble or marble-faced cement. Polished black slate was often used for facings to reduce costs. Only the better-quality pieces, embellished with bronze relief decoration or such mechanical refinements as a perpetual calendar or moon phase dials, are of interest to collectors today. Other designs included the four-glass clock (from c.1850), featuring four panes of glass, and 18th-century revival styles, most of which were produced in gilt metal in the later 19th century. Most 19th-century examples arc of eight-day duration. After c.1870 many cheaper versions of ormolu clocks were made of inferior gilt speller.
• CASES most have ornate cases made of bronze or marble, decorated with rich ormolu mounts; mass-produced marble- or black-slate-faced mantel clocks were common from the late 19th century and are generally inexpensive
• DIALS most arc round and convex, with ormolu surrounds; gilt-metal hands were used c.1800;
later examples have blued-steel hands
• COLLECTING some clocks were produced with matching pairs of candelabra or vases, designed to stand either side of the clock on the mantelpiece; a complete set is desirable and enhances value

Smoking Accessories
The cigarette, like the cocktail, became a mark of sophistication, one of the “in” things during the Deco years. To smoke (and drink) showed one was in step with the “modern” world. This was especially true for women as they shed the forbidding Victorian rules dictating “proper” conduct. More and more women began to smoke in public just as they shortened their hemlines and bobbed their hair.
A number of interesting smoker’s items were made which were either desirable or necessary accessories for those addicted to the habit. For example, ashtrays were indispensable. Both table top and free standing varieties became common fixtures in the home. Most were made of metals such as brass, copper, bronze and chrome but glass and ceramic ones were also prevalent. The ever popular nude figures sometimes were incorporated into the design. Two shown here include a rather simple table top model and an elaborate floor style.
In conjunction with ashtrays, “silent butlers” became an appropriate household item. The name was an apt description for this receptacle fitted with a long handle and hinged lid. For those who had no real butler, these were handy gadgets for emptying overflowing ashtrays at one’s party or cleaning up the stale remains the next day! They were usually made of chrome, brass or frequently hammered aluminum. The latter type, however, do not always fit the Deco image even though they are from the period.
Cigarette holders cover a broad category of smoking collectibles. In fact, the term “holder” can have several different meanings when used in connection with cigarettes. Table top holders refer to open or covered boxes for keeping a convenient supply of cigarettes. These were made as individual containers or as a combination piece with space for cigarettes and matches and even an ashtray. The boxes were also often part of a matching set of separate pieces.
Another type of holder was the cigarette dispenser. These are novel items and a good example of the “purely fun” side of the Deco years. One of the dispensers shown is a “pop-up” type, operating with a spring device. Cigarettes encased in metal holders pop up when the lid is removed. Another has concealed push buttons on two sides. When pressed, the hinged lid opens, revealing individual spaces for cigarettes. A third type of dispenser has a roll-top. When it is pushed back, a tray slides out offering five cigarettes.
The term cigarette holder, however, is perhaps most commonly associated with the individual holder. While these were designed for keeping the cigarette from direct contact with the mouth, they were also used for effect, to impact a chic or debonair look! The holders shown here
range in length from two to six inches. They are made of plastic, tortoise shell or celluloid.
Art Deco cigarette lighters comprise still another group of smoking accessories. Collectors are interested in both the table top and the pocket or purse varieties. Most of the pocket lighters have masculine overtones. Of course, it was the custom for a man to light a woman’s cigarette. Two lighters shown here with floral decor appear strictly feminine, however. One, in fact, is a combination compact and cigarette lighter.
The “bar-tender” lighter is probably the most coveted of the table top models among Deco enthusiasts. Several variations of the type featured here were made by different companies such as Ronson and the Art Metal Works. Some functioned as a cigarette dispenser as well as a lighter. Although they were made as novelties, these rather scarce items fetch hundreds of dollars today.
Incense burners are included in this section. They may be used to mask tobacco odors, and they are complementary in a decorative scheme. Other tobacco related Deco collectibles include cigarette and cigar cases, cigar clippers and cutters, pipe stands, tobacco jars and humidors. Beware that general collectors of tobacciana make the market quite competitive.

Statues
Figures, more than any other category of decorative accessory, seem to say “Deco” best. The statues exhibit not only features commonly associated with Art Deco, but also they express the spirit of freedom and optimism in the future that prevailed at the time. It is not surprising that these personifications beguile collectors. As noted earlier, figures were so popular that they were fashioned into dual purpose articles as well as art objects. This section, however, contains only the latter. Statues, statuettes or figurines and a few head forms or busts are included. (For additional examples of figures, see Ashtrays, Bookends, Candle Holders, Incense Burners and Lamps.)
Most of the Deco figural subjects were women. Pieces were made with couples forming dance partners or duets. Men were also modeled as sportsmen or represented as mythical gods or even circus clowns. Animals made along Deco lines are not so rare as male examples but they are less prevalent than female themes. All kinds of animals, however, were made as decorative sculpture. Members of the cat family (jaguar, panther, tiger) and deer, elk and gazelles as well as dogs (like the greyhound) projected the essential components of the Deco image—speed, grace and sleekness. Certain animals, especially dogs, were often part of female dominated scenes. Even birds such as cockatoos, ducks, parrots and penquins were shaped in stylized forms to fit in with “modern” decor.
The nude or semi-nude female apparently was the most favorite figural topic of the period. It is held in no less esteem by collectors. Poses varied from lanquid, reclining positions to ones expressing movement. Grace and speed were implied by various dance positions or hair shaped as wings or fashioned in a “wind blown” style. Kneeling or standing figures with arms stretched forward symbolized movement into the future. Arms stretched overhead, perhaps holding a globe or sphere, seem to indicate awareness and interest in the world at large.
While the nude and semi-nude figures may suggest the spirit of the period, fully clothed models portray the dress and hair styles in vogue. Interest in other cultures was also exhibited by the figure’s costume. The Egyptian influence was dominant in the mid 1920’s, after the opening of King Tut’s tomb in 1923. Several of the figures shown in this section and some in other categories (see Lamps and Incense Burners) flaunt the trappings of Egyptian attire such as metal breastplates, harem pants and elaborate headdresses. Female figures with black finishes show the influence of African art and black American entertainers. Jazz musicians and torch singers became very popular during the 1920’s, especially in
France.
Decorative figures not only were made in a number of sizes and poses, but also they were made from many different materials, including bronze, copper, metal alloys, plaster, pottery and porcelain. The French bronzes are the most coveted and most expensive. Bronze combined with ivory and precious jewels, silver or gold is called “chryselephantine” work. D.H. Chiparus, who worked in France, is noted to have excelled in this type of sculpture. Prices for his original pieces are in the tens of thousands of dollars today. Collectors should be aware, however, that current bronze manufacturers reproduce or imitate some of his figures as well as several other famous sculptors of the period. Although advertised as manufactured with the “lost wax” method and sporting the same or similarly spelled names of well known artists such as Chiparus, Zach or Preiss, these bronzes are still only replicas and not from the period. Unfortunately, they are sometimes sold by dealers as authentic sculptures. Wholesale prices are not cheap, but do not be surprised to find that sum multiplied several times over when such an item is sold in a retail outlet.
Because bronzes were expensive to manufacture, it did not take entrepreneuers long to recognize the value of mass producing similar statues from metal alloys. Pot metal, white metal or spelter are names frequently used to identify such alloys. Psuedo bronze figures were made in both Europe and America. Even if a piece can be identified as being of French origin, do not assume the metal is bronze. Many of the pot metal pieces were executed quite well. Different patinations and finishes were used to give either a “bronze” look or colored surface. Some were even made with ivory faces and hands, imitating chryselephatine types. Fabricated ivory, often called “ivorene,” was sometimes used, however.
Patination and cold painted are two terms used to describe bronze finishes. Patination refers to a colored finish which is fired onto the metal and thus becomes pern-ranent. Cold painted means the finish was not fired onto the metal. Lacquer was applied to preserve the color, but this type of finish is not totally permanent. Some of the metal alloy figures were simply painted without any sealing coat. Consequently, over time, the paint has chipped or become noticeably worn. Those with apparent surface damage can sometimes be purchased for bargain prices. Dealers have them repainted, but prices should-not be the same as for those in good or original condition. Inspect figures carefully for detail to note signs of age and wear on finished as well as whether there are chips on the face, hair or limbs.
Because of the demand for Deco figures, pot metal statues are far from cheap. Those in good condition, depending on size, will cost several hundred dollars. It is not uncommon for examples to cost $1,000 or more, especially if it can be determined the piece was made in France. It is rare to find any authentic Deco metal figure for less than $100.
Porcelain figurines were made by several European factories prior to World War II. Goldscheider, an Austrian company, is well known for its Deco pieces. Some of the firms who are more famous for their table wares also produced figural items during that time. The Lenox china company in Trenton, New Jersey, made porcelain figures which portrayed Deco themes. Porcelain pieces are generally much more moderately priced than metal statues, but they still are not cheap. Few cost less than $200.
Earthenware or simple pottery figures were also made in this country and abroad. Usually earthenware
items are less expensive than those made of hard paste porcelain or bone china. Not only was the manufacturing process cheaper, but also earthenware is not as strong. It chips and breaks easily and also can become discolored or crazed over time. Pottery figures, however, are often comparable or higher in price than porcelain ones. Those made by American art potteries are very collectible. Some made by American companies, which produced inexpensive pottery dishes and accessories, also made a few figures. Such items were not the company’s main product, and thus the figures are scarce, as well as popular, and bring high prices compared with other items they manufactured.
The statues and figurines are grouped here according to their composition: Ceramic (pottery and porcelain), Plaster and Metals (bronze, copper & metal alloys).

Vases
Vases are designed for displaying floral arrangements, but as solitary objects they enhance a room’s decor. Instead of being merely flower containers, they are considered art objects or decorative accessories, depending on their price. Like table wares, Deco vases were made of either pottery, porcelain, glass or metal. The photographs in this section are arranged in that order.
French art glass vases are the most expensive. Examples shown here include pieces by Legras, Schneider and Verlys. Other French manufacturers such as Baccarat, Lalique and Galld perhaps are more famous. But as their creations have become scarce and very costly, other factories’ products have gained recognition. Consequently, most French art glass has moved entirely out of the range of the moderate collector.
For Deco image, however, less expensive vases made by European and American factories are quite pleasing. Much of this glass is unmarked and not attributable to any one factory. Lack of identification may serve the collector well when Deco shape rather than company or artist is the major concern. Czechoslovakian glass made between 1918 and 1939 has been gaining interest among Deco collectors for several years. Most of the pieces are marked “Czechoslovakia” or “Made in Czechoslovakia.  The shapes and vivid colors of this good quality glass are quite representative of the Deco era. Prices usually remain moderate. Black milk glass or black amethyst glass made during the 1920’s and 1930’s is another type of relatively inexpensive glass with Deco overtones. Black glass was made by several American factories, but most pieces are unmarked.
American glass makers such as Cambridge, Fostoria, Heisey and New Martinsville, to name a few, are noted for stemware and serving dishes, but vases and other decorative items also were produced by these factories. Clear and colored glass vases were sometimes made to match the modern table ware patterns. Fan shapes, blocked geometric forms and even etched nude designs project a Deco theme. Although this type of glass is avidly collected by Depression glass collectors, prices are far less than those for French art glass.
The most expensive ceramic vases are those made by European art potteries. Art pottery, however, usually is priced lower than art glass. This is apparent when prices are compared for the Amphora and Boch Freres ceramic vases with those for the Legras and Verlys glass examples. American art pottery is generally lower in price than European. Among American Art potteries, attention is being paid to the Deco production made by companies such as Roseville. Less expensive vases are Japanese or American pottery varieties which were sold by dime stores or florists’ shops. The angular white glazed Japanese vase shown here was originally cheap, but the striking Deco shape has caused its current value to increase sharply.
Porcelain vases are medium priced with few being either bargains or exorbitantly high. Porcelain is superior to simple pottery because it is stronger and translucent, but those qualities are not always reflected in prices. Most European porcelain vases are less expensive than European art pottery. The reason is because many decorative items such as urns, vases and jardinieres were produced in quantity by porcelain factories. Moreover, they were often decorated with transfer designs or exported as undecorated vases. The latter were purchased by aspiring amateur china painters, and thus the decoration is not as creative or professional as that of art potteries.
Metal adapts well to angular shapes. Although glass and ceramic vases are more common, those made of brass, bronze, copper or chrome often evoke the Deco image in a more eye-catching way. The chrome vases pictured here are priced at the low end of the scale, but the Deco features are quite obvious. Brass and copper vases vary in price depending on size, but most are over $ 100. The sterling on bronze vases were made by the Heintz Art Metal Company. Such pieces are rarely less than $100 or more than $300. French bronze vases may be out of an affordable price range for moderate collectors. But an urn like the one shown, or similar vases, is usually considerably less than a bronze statue would cost. If French bronze would lend a note of prestige to one’s collection, such vases are a good choice.