Posts Tagged ‘elegant designs’

Antique Engraved Glass

Engraving, whereby a decorative pattern is finely cut onto the surface of the glass, dates back to Roman times. The very earliest types of engraving were diamond-point engraving, which involves scratching fine lines into the glass with a sharp instrument (usually a diamond stylus), and wheel engraving, where the design is cut into the glass by means of a rotating
wheel. Stipple engraving, a more sophisticated form of diamond point engraving, where patterns of tiny dots rather than lines at used to create a shaded design, was first used from c.1621 acid etching, which involves burning a design out of the top layer of glass with acid, evolved with the invention
hydrofluoric acid c.1770 and was widely used in Britain.
Although glass was engraved from Roman times, and examples of fine engraving exist on 15th–century Venetian glass, the widespread use of such techniques as diamond-point and stipple engraving dates mainly from the second half of the 16th century. These techniques were introduced to decorators in the Low Countries by itinerant Venetian glassworkers. Wheel engraving was first used in Germany in the late 16th century.
DIAMOND-POINT AND STIPPLE ENGRAVING Diarnond-point engraving, in which the design or decoration is scratched onto the surface of the glass by a sharp diamond stylus, is particularly suited to thin-walled glass too hard to withstand wheel engraving. It was the only engraving technique suitable to
be used on delicate cristallo glass. Diamond-point engraving was therefore quite common on 15th-century Venetian and later facon de Venice (”in the style of Venice”) glass. However, the technique did not reach its apogee until it was taken up in the Low Countries during the 17th century, where it was carried out by both amateur (those who decorated glass as a hobby) and professional glass decorators. Anna Roemers Visscher (1583-1651) was an amateur glass decorator in Amsterdam, where she engraved delicate designs of flowers, fruit, and insects, as well as lines of poetry in calligraphic script, on beakers and Romer (a type of drinking glass). Another distinguished amateur glass decorator, Willem Jacobsz van Heemskerk (1613-92), in Leiden, produced most notably free-flowing calligraphic designs on such wares as bulbous serving bottles and jugs. Among the best-known professional engravers was Willem Mooleyser (active 1685-97), from Rotterdam, who used diamond-point engraving on bowls, flasks, goblets, and Romer.
In stipple engraving, which is a development of diamond-point engraving, a stylus is very gently tapped on the glass to make a design built up of small dots; these dots create areas of light (dense areas of dots) and shade (sparse areas of dots) to create the delicate design. The detail may be so fine that the design will Only be seen clearly when the glass is held to the light. Common designs include portraits and allegorical Subjects. Examples of stipple-engraved glass are rare,
as the technique is slow, extremely difficult, and requires great skill and patience.
As with diamond-point engraving, the most notable designs were produced by glass decorators from the Low Countries. Visscher introduced the technique to The Netherlands c.1621, but perhaps the best-known exponent was Frans Greenwood (1680-1761), an amateur glass decorator in Dordrecht who employed the technique exclusively from c.1722. He incorporated floral and fruit motifs and also copied designs from contemporary mezzotints and paintings. One of his followers was David Wolff (1732-98),
), a painter who
produced his own designs and portraits. Some of Wolff’s pieces are signed and his style inspired other artists towards the end of the century; such pieces are commonly known as “Wolff” glass. Another follower of Greenwood was the painter and engraver Aert Schouman ( 1710-92). Greenwood, Wolff, and Schouman all mainly worked on glass thought to have been made in the factories around Newcastle-upon-Tyne in northern England, which made a soft glass that was better suited to the stippling technique than the more brittle soda glass.
WHEEL ENGRAVING
In wheel engraving, a mechanical wheel fed with an abrasive paste (typically a mix of oil and emery) is used
cut a design onto a glass surface. The technique, which has been used since Roman times, is best suited
thick-walled pieces, because the depth of the cut is an essential part of the design. The modern technique was probably developed between c.1590 and 1605, at the court of the Holy Roman Emperor Rudolph 11 in Prague, by the gem engraver Caspar Lehman 15-0-1622), who engraved plaques and beakers with portraits and allegorical subjects.
In Bohemia a new type of glass known as “lime” glass, in which chalk lime carbonate was added to the batch to give a strong, colourless crystal suitable for deep engraving, was developed c.1683. At about the same time water power was introduced to drive the wheels, and this also enabled deeper cutting. Especially notable is the work of Dominik Biemann (1800 1857), whose training at the Prague Academy of Drawing is reflected in his fine engraved portraits on beakers and medallions. Of particular note are the Baroque pokals lidded goblets) decorated with Hochschnitt (”high cut”) engraving by the Silesian Friedrich Winter (d.C. 17 12). One of Lehman’s pupils was Georg Schwanhardt the Elder 1601-70), who left Prague for Nuremberg where he established a workshop and founded a dynasty of skilled engravers, including his son Heinrich (1624l
The technique was further developed in the 19th century, as Bohemian craftsmen pioneered a process whereby glass was overlaid with a layer of glass in a different colour and then wheel engraved to show the design in the colour of the first laver. Two lavers of glass were standard, but sophisticated pieces were composed of up to four layers. Such pieces demanded great expertise, as each coloured layer cooled at a different rate, and with each additional colour the risk of cracking increased. Common decoration included forest and hunting scenes, rural views, and castles. However, most sought after are special commissions such as portraits of famous people, battle scenes, and important buildings. Highly skilled Bohemian craftsmen travelled across Europe, so many pieces of this type were produced in various countries.
Towards the end of the 19th century some fine wheel-engraved pieces with Hochschnitt and Tiefschnitt (incised or intaglio) decoration were designed by J. & L. Lobmeyr (est. 1823) in Vienna. The firm produced copies of 18th-century designs and worked in Classical and contemporary styles. Leading engravers who worked for Lobmeyr included Karl Pietsch ( 1826-83), Peter Eisert ( 1828-94), and Franz Ullmann (1846-1921 ).
Engraved glass was also produced in Sweden. In the 20th century some outstanding pieces were made at the Orrefors factory (est. 1898) in Orrefors, in the Sul Aland region. In 1916 Simon Gate ( 1883-1945) was brought in as a chief designer, and he was joined the following year by Edvard Hald (1883-1980). Gate’s designs typically feature elegant Neo-classical figures,
while Hald’s figures are more caricatured and are mostly shallow engraved. Between 1928 and 1941 Vicke Lindstrand ( 1904-83) also worked for Orrefors, producing stylish and elegant designs.
Diamond-point and stipple engraving
• CONDITION diamond-point engraving should be shallow, with ragged, slightly broken lines, minor damage will not greatly affect value of early pieces
• BEWARE copies were decorated by
enthusiastic
amateurs in the I 9th century; when dated there is no Confusion, but undated older glasses can be misleading
Marks
Diamond-point pieces may he signed on the foot or in the design
Wheel engraving
• TYPES OF GLASS 19th-century Bohemian coloured glass Was a popular base; this glass should feel heavy
• DECORATION late 18th-century pieces feature formal designs; heavy, ornate engraving is typical; high-quality pieces have elaborately cut, ornate feet

The eighteenth century
The somewhat oppressive style of Louis XIV died with him. After his death life at court was characterised by elegance and a lighter touch. The effect was also felt in art with the salons of Paris being at the heart of the cultural life. The luxury of city life worked through to the country homes of the aristocracy which set an example to all Europe. The houses were extended with libraries, boudoirs, dining rooms, ballrooms, dressing rooms, bedrooms, workrooms and quarters for the servants being added. To give each room
its distinctive function, the range of furniture also became extended.
France — Regency and Rococo
During the Duke of Orleans’ regency rooms were still furnished with robust furniture but in the second half of the eighteenth century this altered radically. The fashion switched to lighter, more elegant designs that were also somewhat decadent in their decorative style. This made itself apparent in furniture with flowing lines, S-forms, and scrolls. Rococo was a fairly radical style period that endured for a shorter period in France than in other European countries. Customers made ever increasing demands on the furniture makers and furniture was required that was larger in size.
This caused a demarcation among the furniture makers with them specialising for instance in a particular type of expensive wood which they then made into furniture of the very highest standards. This was equally true of the bronze founders who engraved their adornments as if it were jewellery.
Increased demand brought about a certain amount of standardisation. The ebenistes started to buy in timber, drawers, mouldings, marquetry, and handles and catches. All the ebenistes were required to sign their work from 1743, except for those working in the service of the King and yet it can be extremely difficult to identify a maker. This is because all the ebenistes also sold furniture made by others and it was their custom to sign all the furniture that they sold.
Daily life for the upper echelons of French society was extremely lively. Lots of callers were received and many visits also made, and in the evening they either attended or gave dinner parties. Lots of different types of seating were therefore needed which had to be comfortable.
Only curved forms would do for these. Among the new types of seating there was a short upholstered sofa of which one type was known as a berg&e.
This had a closed back.
There was also the bergere a joue, which somewhat resembled a modern wing chair, and a number of versions of the chaise longue for lounging on. A chaise longue that was open at the front was known as a turquoise, while the variety with upholstered armrests was known as a vieilleuse.
A canape has open armrests at the side, while a sofa has S-form closed side arms. The dressing table was accompanied by a fauteuil de toilette and a desk or bureau by a fauteuil de bureau. Rococo furniture was decorated with brocade, damask, velvet, or satin. Damask came from Genoa, Lyon, or Peking. Gobelin tapestry and cloth with petit-point embroidery from the state factory at Aubusson were used to upholster furniture. Woven reed was also used to make seats and chairs backs.
The gilt carved cartouches and shells of Italy disappeared from decorations to be replaced with unrestricted compositions with ribbons and flower stems.
The rocaille from which some say Rococo got its name came into vogue around 1750. There was a movement, up to the middle of the century, away from structure-led form towards ornamental design and was expressed also in the bronze embellishments. These were applied to table legs for example where stringers and legs met. A piece of furniture with a purely decorative function is the Rococo console which eventually replaced the console table.
Cabinets disappeared from interiors during the Rococo period except for in country homes and those of the citizenry, although there were half-height cabinets with two doors serving as wash-stand chiffoniers known as meuble d’entre deux and small bookcases with two doors. There would be a games table in
the salon, sometimes with a chessboard inlaid into its top and the round gueridon or pedestal table was made for all manner of small items. There would be a large table in the dining room together with a whole series of smaller tables and for when they wished to talk without being overheard by the servants, there would be a ‘dumb waiter’ on which the staff would leave the food before retiring. In a ladies’ room there would certainly be a dressing table or table de toilette which later became known as a poudreuse. The lady would also have a writing table or bonheur du jour in one of her rooms. Men’s desks were much heavier in appearance, usually made from palisander but other words were also used for bureaux. Flat-fronted bureaux were popular until 1750 after which the cylindrical bureaux became more fashionable.
There would be several night tables in the sleeping quarters: the tables de nuit and tables de lit. During the Rococo period beds became more elegant and graceful but often with whimsical valances from which their names were derived of lit a la Chinoise, l’Anglaise, l’Allemagne, or l`Italienne. No chests or coffers were to be seen anywhere in the salons, these had been replaced by a commode with two attendant corner cabinets.
The form of the commode had also changed. The curves of the front had now disappeared and the bronze handles and catches were geometrically arranged. The bottom of the commode was bowed. As the years passed, Rococo became increasingly more complex. Bronze ornamentation and intarsia inlays now covered the entire fronts of pieces, without regard for the drawers.
Subsequently the decoration moved more to the sides of pieces. Bronze ornamentation became more simple with cleaner lines after 1740. Whatever their specialisation, virtually every furniture maker produced commodes during the Rococo era. Some of the famous names are J.P.
Latz, J.F. Leleu, Nicolas Pineau, F. Oeben, J.H. Riesener, Bernard van Risen-burgh, and Abraham Roentgen.
There was strongly exotic side to Rococo so that lacquered furniture was extremely popular at this time. Rococo flourished most during the first half of the eighteenth century and at this time French lacquer-work production overtook even that of the Dutch who had been the biggest producers of reproduction chi-
noiserie and the largest importers of Chinese and Japanese lacquer items. The Dutch Martin brothers were the major producers of reproduction chinoiserie.
Germany and Austria
The political situation had as great an influence on the furniture industry during the Rococo period as during the preceding era.
The artistic and cultural leanings of the individual courts depended both on their geographical position and political realities. Hence the main cities of Berlin, Dresden, Munich, and Vienna took their lead from the French court.
The German/Dutch Rhineland and the area between Liege and Achen differed markedly from the German/French Rhineland. There was a clear preference for Dutch and English style furniture in northern Germany.
The biggest variation in types of furniture and their styles resulted from the personalities of the persons commissioning them. When German makers did follow French inspiration they did not do so closely. This resulted in the Bandestil or `banded style’ which got its name from the banding motif popularly used until the mid eighteenth century on much furniture, but specially on bureaux.
A German Rococo secretaire had a style of its own, with a curved form which gave a far from restful appearance. The legs and corners were also slightly bowed and slanted. These secretaires were mainly made of ebony and fitted with drawers. Colourful marquetry was very popular for decoration. Frankfurt cabinets had a similar appearance and were therefore also extremely popular.
Northern makers who followed French ideas for commodes fitted them with three, four, or five drawers but they used no veneer. Further south, in contrast, a commode was deemed to be a tall cabinet finished in walnut veneer. This was finished unpretentiously with iron handles and fittings and had straight sides. The only decorated examples were those for aristocratic houses of the princes. The commode was a piece of furniture for the common folk. These were finished with refined carving in unvarnished oak and walnut in both Achen and Liege. These cities also made corner cabinets for tableware, wardrobes,
small and tall dressers, and display cabinets.
The bureau was adopted from France too but German versions were both lower and less deep.The glazed fronted Dutch cabinet was further developed in north-west Germany and there was also clearly a Dutch influence in their lacquered furniture. Some chairs were both lacquered and decorated with inlays. The most common furniture though is made of stained walnut and oak.
The most precious pieces were gilded. Furniture made of beech or lime was usually painted yellow or white. Luxury items of furniture were also made in some places in Austria and Switzerland, often with the help of important artists. There are also delightful country pieces from this era. Rocaille motifs continued to be used in painted decoration until the middle of the nineteenth century.
France - Louis XVI
A desire for the classical world returned in the middle of the eighteenth century resulted in a number of artists making journeys to Greece and Italy. Classicism became more widely known through their books, lectures, and works of art. Excavation of Herculaneum and Pompeii produced a great array of artistic treasures which inspired many contemporary artists.
This also coincided with a movement in art towards simplicity and naturalism. This trend manifested itself first in furniture, before the other arts. Furniture makers once more used motifs such as plaited garlands, egg and tongue mouldings, Hermes, nymphs, lion’s heads, vines, rosettes, bull’s heads, and Doric friezes. Rococo had shown a preference for gilding, white paint, and light colours. The mouldings and bronze ornamentation now faded into the background. Muted coloured veneers
Louis XVI dining chair.
From the 1880’s, at the end of Rococo, inlays of Sevres porcelain had been used together with glass painting and lacquer from Asia. Floral motifs were popular for upholstery fabrics. Chairs were not just required to look fine but also to be comfortable. The backs of chairs became rounded or oval in the 1870’s. These were crested with carved decoration. Legs resembling fluted columns were popular. The types of seating did not change though.
A newcomer was the three-seat sofa known as a confidente. The sides of both sofas and bergeres were now generally straight. Console tables stood on a fluted column. Beds were no longer placed in an alcove and the side not against the wall was decorated.The common folk’s furniture remained conservative. Items made for the citizenry
included two-door cabinets, ladies’ and medium height two-door dressers. Commodes were rectangular, smooth, and mainly set on conical legs.
A newcomer to less exalted homes was the cylinder bureau.One of the best furniture makers of the time was undoubtedly J.H. Riesener.
His pieces are decorated with marquetry flowers, urns, and fruits. Furniture was decorated with many allegorical figures and bronze embellishments. Riesener partially changed his approach towards the end of the eighteenth century with the introduction of straight legs and more geometrical marquetry. He undoubtedly gave his closest attention to his rectangular secretaires and commodes with rounded corners Most of the ebenistes working for the French court were actually German.
Great names among suppliers to the court include J.F. Schwerdtfeger and Adam Weisweller. The greatest of all were Abraham and David Roentgen, who also sold to the courts of other European rulers.
A provincial Louis XVI cabinet with basin for rinsing glasses.
David Roentgen’s speciality was furniture with secret mechanisms. His marquetry decorations were based on designs by the fresco artist Januarius Zick.
David Roentgen lived in Paris between 1775 and 1780 and it was at this time that his finest pieces were made. Most of them were light in colour with bronze decoration.
The first to incorporate English ideas in furniture in France was G. Jacob, a woodcarver, who made armchairs of mahogany. The backs of his chairs were in the form of an oval medallion and they had console legs.
The fan-like fretwork form of his chair backs was very fine. The German maker J.G. Bennemann specialised after 1779 in large horizontally arranged dressers that were decorated with bronze adornments specially made by P.P. Thomire.