Posts Tagged ‘example’

WINE-GLASS, BLUE GLASS CASED OVER
GLASS, with ACID-ETCHED DECORATION
Benjamin Richardson, England, 1857
I It. 143 mm (563 in.)
Acid Etching: Although acid-etched glasses
arc known to exist from the 17th century,
the process was not generally used in glass-
making until the 19th century, with the
discovery of hydrofluoric acid. Heinrich
Schwanhardt (d.1693), son of the Nurem-
berg engraver Georg Schwanhardt, is
recorded to have engraved glasses with
acid, one example attributed to him being
dated 1686. The technique can be used
either to cut through one layer of glass to
another, as in the glass illustrated, or to
provide a single-layered glass with a matt
finish. An acid-resist such as wax paraffin
covers the parts that are not to be affected,
the pattern having been cut through the
resist. The surface of the glass is then
treated in an acid bath (such as a mixture
of 100 parts of water, 10 of potassium
fluoride and t part hydrochloric acid).
Benjamin Richardson of the Richardson
firm of Stourbridge took out a patent to
etch glasses in 1857.
VASE WITH ACID-ETCHED DECORATION
J. & J. Northwood, England, r.1878.
Ht. 216 mm (85 in.)
It was only in the 19th and 20th centuries
that acid-etching became at all an accepted
mode of decoration. In England it is
known that the Dudley firm of Thomas
Hawkes used the technique in the 1830’s.
Besides flat glass objects, wine-glasses,
bottles and vases were being acid-etched
by the 1840’s. John Northwood and T.
Guest were involved in the Richardson
experiments with acid-etching, and in the
186o’s established themselves as individual
firms specialising in etching. They were
known as J. 8c J. Northwood, and Guest
Brothers respectively, and produced a
quantity of etched work in the later 1860’s
and 1870V The skill and delicacy of the
etching they achieved can be seen on the
vase illustrated, made at the J. 8c J.
Northwood works and shown at the Paris
Exhibition of 1878. Acid-etching was by
no means a technique confined to England,
however.
The Techniques of’Taking Away
As Maurice Marinoi of Trance grew to
understand the nature and working of
glass, he experimented with its ornamen-
tation. In 1922 he began using the
technique of acid-etching in a manner
distinctly his own. The process had been
used by French glass-makers since the
mid-19th century. F.mile Galle, comment-
ing on the technique, had said that it would
not do for delicate work, but ‘it cuts into
certain glasses in a manner of its own’. He
used it in his factory from 1890 onwards,
and the Daum factory had also used it to
some extent. Marinot took up acid-etching
because it suited his purpose better than
any other decorative technique. When he
employed acid-etching he used the massi v e
forms he had always favoured, in trans-
parent, occasionally tinted, glass. The
etched designs cut deeply into the surface,
giving an almost sculptural look to the
glass. The whole surface of the glass was
subjected to the treatment, with the most
varied results.
Acid-etching has been used to give a matt
surface to the colourless glass vase illus-
trated. This slender vase has a round foot,
w ith a long stem widening slightly towards
the bowl, which is of an exaggerated tulip
shape. It is just one example of the beaut]
of modern Swedish glass. Even such an
aesthetically difficult technique as etching
has been triumphantly used to give .1
beautiful all-over textural and eye-catch-
ing finish. It has been said that ‘Sweden’s
great contribution to modern design was
to transform Functionalism from an in-
tellectual theory into a practical instru-
ment for better living’ (Polak, 1962). This
was eminently shown in her glass-making;
but besides qualities like fitness for prac-
tical purpose, toughness in wear and
cheapness of production, the general aim
from the beginning was to create objects
of beauty. The Swedes succeeded in their
glassware perhaps more than in any other
branch of modern design.
ENGRAVED AND SAND-BLASTED VASE
Hy Sverre FtTterscn, Hadeland, Norway, 1038
Sand-blasling: In the process of sand-
blasting a stream of sand, crushed flint or
powdered iron is directed on to the surface
of the glass in a jet of air. The parts of the
glass to be left plain are covered with a
stencil plate of steel, or an elastic varnish
or rubber solution painted on to form a
protective shield. The type of finish is
varied by altering the size of the nozzle, or
the abrasive, or the air pressure. The
technique has been in use since 1870,
though it has rarely been applied to vessel
glass, except for lettering on mass-pro-
duced items, and is mainly used on glass
panels for decorative architectural use.
One of the more successful uses of sand-
blasting on vessel glass was by Sverre
Pettersen of Norway (1884-1959), who
was engaged as designer to Hadelands
Cilasswerk in 1928—at that time the only
factory for table glass and decorative glass
in Norway. During the ‘thirties he pro-
duced some very interesting pieces with
sand-blasted decoration.
PLATE WITH SAND-BLASTED ENGRAVING
By I adislav Oliva, Czechoslovakia, 1959
Diam. 362 mm (1425 in,)
Such are the difficulties attached to using
sand-blasting for anything but the heaviest
surface decoration that only very occasion-
ally are satisfying examples of the tech-
nique to be found. One of the exceptions is
this plate, designed and executed by
Ladislav Oliva (b. 1933) in Czechoslovakia.
The plate, in clear colourless lead crystal
glass, has a slightly raised rim, and the
grille-like decoration is in the form of cuts
about to mm (4/ioths in.) deep. Oliva
manages through this technique to give
the glass a new and exciting appearance.
His decorative themes always seem to
result from the natural lights of the heavy
glass mass. The matt finish that sand-
blasting imports to the glass can be very
pleasant to the touch, although sometimes
it can give a fairly rough effect.
The  century has been called the ‘golden
age of glass”, for it added many new tech-
niques to the glass-maker’s repertoire. This
sudden burst of activity can be put down to
many factors, including ‘the industrial revo-
lution, the relaxation of government controls
on the industry (specifically in England) and
a pride of craftsmanship born of freedom’
I Revi, i<)5g). Not since the Italian Renais-
sance had there been such an interest in new
glass-making ideas. In America the larger
firms hired scientists to discover new methods
of colouring glass, one of the best-known
being the Englishman Joseph I^ocke. In
Britain and on the Continent there was keen
rivalry in producing new types of art glass
for a highly competitive market. Demand
rem lied its zenith towards the end of the
I ii torian era. Since then, though new
techniques have still greatly interested glass-
makers, the art glass produced has reflected
the inherent qualities of the material, rather
than added decorative effects.
Pearl Satinglass, also known as Pearl Ware,
Mother-of-Pearl Satinglass and Verre de
Soie, can be found in a variety of patterns
and colours, but basically it shows the
technique of keeping a symmetrical or
controlled pattern of air traps within the
body of a vessel. The vase illustrated shows
a typical example in the so-called hobnail
pattern. Benjamin Richardson of England
filed the first patent for this technique in
1857. His method was quite simple. A
gather of glass was blown into a mould
which carried the pattern in projected
form. The piece, thus indented, was
covered by a further gather of glass, which
caused air traps to form over the pattern.
Another method current in England and
America in the late 19th century was to line
a heated mould with glass tubes, either
clear and colourless or coloured, and to
blow a bubble of glass into this mould.
BOWL OPAQUE IVORI
COLOURED GLASS CASED WITH A P.AIJi RUBY OUTER
LAYER
Stevens & Williams, England, about 1885
lit. 140 mm (55 in.)
The tubes would thus be caught up and
marvered into the body of the glass. By
twisting the paraison the worker produced
articles of glass with pearly swirled stripes
on the outer surface. This method was
probably used to produce the body of the
bowl illustrated, which has been further
worked to form a frilly rim, and has the
heavy applied decoration current around
1885, Patents to produce Pearl Satinglass
were filed by firms in New York in 1881
and France in 1885. The Mt. Washington
Glass Company of the U.S.A. filed patents
in 1886, which also suggested using heat-
sensitive metal to colour the glass, and
giving the article a lustreless finish by
using an acid bath, or by sand-blasting.
The Phoenix Glass Company of Pennsyl-
vania filed patents in 1886, 1887 and 1888;
the final patent described the use of two
moulds, one to pattern the inner wall of
the article, the other to be used after the
outer casing of glass had been applied.
FAIRY LAMP IN PEARL SATINGLASS, RAINBOW STRIPED
IN BLUE, ROSE, YELLOW AND APRICOT
About 1885. lit. 152 mm (6 in.)
The finished product made by the tech-
nique last described displayed a criss-
crossed network of pearly-indented lines
contained in the body of the article.
William Webb Boulton, who had the
Audnam Bank glass-house in England,
filed a patent for Pearl Satin Glass in 1885.
Other English glass-houses manufactured
this type of glass, notably Stevens &
Williams of Brierley Hill, who called it
‘Verre de Soie\ Much of the Pearl Satin-
glass produced in the late 19th century
came from Bohemian and French factories.
These cheaper wares, supplied by factories
at Steinschonau and Altrohlau, Bohemia,
effectively ruined the market for the finer
wares of England and America. Many
different means were used to colour Pearl
Satinglass. The rainbow striping suggested
in this fairy lamp was produced by laying
coloured rods of glass on the body of the
article before it was fully formed.
VASE IN PEARL SATINGLASS
Thomas Webb & Sons, England, probably early
iSoo’s. Hi. 260 mm (1025 in.)
The technical development of trapping air
in moulded recesses between an opaque-
glass body and a tinted layer was further
refined by Thomas Webb & Sons of
England. In the magnificent example
illustrated the vase has a diamond air-lock
pattern between opaque and translucent
layers of glass, but has been covered by an
outer layer etched away to form a floral
pattern in relief; the whole article has a
satin finish. In 1889 Thomas Webb
patented this process for manufacturing
cameo relief designs on articles of Pearl
Satin Ware. After the diamond air lock
pattern had been produced in the usual
way, an extra coating of opaque white or
coloured glass was applied. The design
was painted on to this coating with acid-
resisting inks; when the article was plunged
into an acid bath, the acid dissolved away
all glass not protected by the resist. The
glass-maker had to be extremely careful
not ti) leave the object in the acid too long,
lest the acid reached the air traps.
FOOTED VASE, WITH CORAIE1NE DECOR AI ION
Last quarter of iqih century. 111. 127 mm (j in.)
Corulene: ‘The vase illustrated displays a
type of decoration that became popular
from its introduction in the last quarter of
the 19th century and is known as
‘Coralcne’. A design was painted in enamel
on the surface of a glass. Tiny glass beads,
which could be clear, coloured or opales-
cent, were then applied and stuck to the
enamel paint of the design. The object was
next put into a muffle-kiln, where the
enamel and beads were fired firmly into
place. Decoration could be in the shape of
coral, but is also seen in fleur-de-lis,
herringbone, sheaf of wheat and many-
other patterns. This type of decoration is
found in all colours and on all types of
glassware. Coralenc was so named by the
Mt. Washington Glass Company in the
U.S.A., and by several Continental and
English glass manufacturers. Its use was
not restricted to any one factory.
Amberina is generally recognised as a
clear amber glass shading to red at the top.
The patent for it, dated July 24, 1883, was
granted to Joseph Locke of the Libbey
Glass Company. This remarkable man was
born in Worcester, Kngland, in 1846 and
worked first as a potter. Guest Brothers of
Stourbridge, etchers and decorators of
glass, engaged him, but later he was
persuaded to join the firm of Hodgetts,
Richardson & Company, where he pro-
duced his copy of the Portland vase. After
various employments, Locke finally went
to America in 1882, where he was signed
on by the New Kngland Glass Company
of Cambridge, Mass., later to become the
Libbey Glass Company of Toledo, Ohio.
‘Amberina’, ‘Pomona’, and ‘Agata’ glass
are only a few of his achievements while in
their employment. Amberina was the first
patented method for producing shaded
and parti-coloured glassware from a sen-
sitive homogeneous metal.
To produce Amberina a very small amount
of gold in solution was colloidally dis-
persed in a transparent amber glass metal.
When an object had been made from this
mix, it was allowed to cool below a glowing
red heat and then certain parts were re-
heated at the ‘glory hole’ (a small opening
in the furnace). This caused a red colour to
strike in the reheated portions—but over-
firing caused a fuchsia or purple shading.
Further patents were issued either to
Locke or to Kdward D. Libbey. An
interesting development was the produc-
tion of blanks composed of sensitive
Amberina glass which, after moulding,
were reheated to produce a deep ruby
colour on the outer surface only. A design
would be cut through to the undeveloped
amber colour below, giving a rich effect.
Amberina was made in Cambridge, Mass.,
between 1883 and 1888 by the New
Kngland Glass Company. A fine though
short-lived revival was made between 1917
and 1920, when the firm had moved to
Toledo, Ohio; one of its products is
shown above.
New England Glass Company, U.S.A., 1886
Ht. 178 mm (7 in.)
Almost every glass company in Europe and
America probably made Amberina at some
time during this period. A new technique
was patented for the New England Glass
Company in 1883 and was called ‘Plated
Amberina’; this was unique to that firm.
A piece of opal or opalescent glass plated
with a gold-ruby mixture was reheated at
the ‘glory hole’, so that it would develop
deeper and lighter shadings on its outer
surface. When Amberina metal was used,
the shading would of course be amber-to-
red. However, other colours could be
made: a sensitive cobalt and ruby glass
mixture would produce a plated ware
shading from blue to ruby. Canary, blue
and green colours were also mentioned in
the patent. Plated Amberina invariably has
moulded ribbed decoration, as in the
example shown, though this had no par-
ticular bearing on the specifications men-
tioned in the patent. It was manufactured
only from 1883 to 1886.
PARFA1T oi.ass in rose amber glass
Ml Washington Glass Company, U.S.A., 1886
Ht. 127 mm (5 in.)
The Mt. Washington Glass Company,
New Bedford, Mass., attempted more or
less successfully to produce its own
Amberina glass under the name ‘Rose
Amber’. This was in every way similar to
Locke’s Amberina. Needless to say, the
New England Glass Company had an
injunction granted in 1886 in their suit
against the Mt. Washington Glass Com-
pany for infringement of their patent.
The Circuit Court of the United States
forbade the New Bedford firm to produce
its Rose Amber wares. However, it did not
seem that this injunction had any effect.
The New Bedford Board of Trade Report
of 1889 describes the making of Amberina,
Rose Amber, by ‘two companies, of which
the Mt. Washington was one’, and de-
scribes how ‘it caught the popular fancy
and was all the rage for about two years’.
According to this report it was the success
of the Amberina glass that caused Mt.
Washington to go in for an opaque shaded
ware—Burmese glass.
AMBERINA GLASS
New England Glass Company, U.S.A., iS
iii. 121 mm (475 in.)
WINE-GLASS IN ALEXANDRITE GLASS
English, beginning of 2olh century
Ht. 114 mm (45 in.)
Quite a number of Amberina pieces were
pressed or press-moulded. This piece can
definitely be attributed to the New Eng-
land Glass Company, since it follows a
design sketch made by Joseph Locke in
1884 when he was head designer for the
Cambridge winks. I lobbs Brockunier &
Company of Wheeling, West Virginia,
were licensed to manufacture pressed
Amberina by the New England Glass
Company in 1886. Sowerby’s Ellison Glass
Works Ltd., Gateshead-on-Tyne, Eng-
land, were also licensed to produce pressed
Amberina in 1883. A transparent, homo-
geneous glass shading from pale amber to
a delicate rose tint was press-moulded by
the firm of CristalletICS de Baccarat of
France from 1916. Known as ‘Rose Teinte’,
or to collectors as ‘Baccarat’s Amberina’,
it was reintroduced in 1940 as a popular
item. Its delicate colours were a result of
using less gold salts in the glass, but its
similarity to the American Amberina and
Rose Amber is undisputed.
‘Alexandrite’ glass, a single-layer glass of
three blended colours, first appeared about
1900, and is reputed to have been made by
the two English firms of Thomas Webb &
Sons and Stevens & Williams. 11 started off
as an amber glass; a portion would be re-
heated to rose, and reheated again to blue
on the outer rim, producing an exception-
ally beautiful effect. It is found in plain as
well as patterned surfaces. Stevens &
Williams used a differing technique to
produce the same effect. They cased a body
glass of transparent amber with rose and
blue glass. The outer casings of blue and
rose were then cut away, to reveal the
yellow glass beneath. Kolo Moser, a glass
designer of Bohemia of the early 1900’s,
produced an amethyst transparent glass
which carries the mark ‘Alexandria, but
this one-colour ware should not be con-
fused with the work attributed earlier to
Webb and Stevens & Williams.
PITCHER IN RUBY GLASS WITH DEVELOPED
OPALESCENT DESIGN
I hi i ijih century. I It. 279 mm (11 in.)
Opalescent Glass: In the late 19th century
glasses with raised opalescent white de-
signs became very popular. A coloured
gather of glass was heavily coated with a
sensitive, clear colourless glass containing
bone ash and arsenic. This was blown into
a patterned mould to give it the raised
design. It was then cooled slightly and
reheated, the raised parts striking an
opalescent white, while the background
retained the original colour. Inexpensive
glassware in this technique was produced
by Hobbs Brockunier & Company of
Wheeling, West Virginia; Alexander J.
Beatty & Sons of Steubenville, Ohio;
Phillip Arbogast of Pittsburgh, Pennsyl-
vania ; John Bryce & Company of Pitts-
burgh ; King & Company of Pittsburgh;
and Doyle & Company of Pittsburgh, and
others. Thomas Davidson of George
Davidson & Company Ltd. the Teams
Glass Works, Gateshead-on-Tyne, Eng-
land, patented in 1889 a process for making
a pressed, shaded version, in which the
opalescence was either white or of the
same shade as the body metal.
VASE IN BURMESE GLASS
Ml. Washington Glass Company, U.S.A., 1885
Ht. 305 mm (12 in.)
‘Burmese’ glass is a single-layered glass
shading from opaque greenish-yellow to
deep pink at the top. It was developed by
the Mt. Washington Glass Company,
New Bedford, Mass. Frederick S. Shirley
patented his formula for Burmese in 1885
for the firm. He produced the glass by
adding small amounts of fluorspar, feldspar
and oxide of uranium to essentially the
same ingredients as used by Joseph Locke
to make his Amberina glass. The fluorspar
and feldspar gave the glass its translucency,
and the uranium oxide made the ordin-
arily translucent white glass melt a pale-
yellow in colour; the gold made the glass
sensitive to thermal changes so that when
reheated at the ‘glory hole’ it struck a
salmon pink colour, which shaded down
to the original yellow. A second reheating
caused the pink glass to revert back to its
yellow colour, a feature quite often seen
on the rim of a piece of Burmese glass.
Frederick Shirley’s formula for Burmese-
glass was patented in England in 1886.
Thomas Webb 8i Sons of Stourbridge,
England, purchased a licence to copy-
Burmese products as well as to produce
their own shapes and designs. Most ol t he-
English Burmese ware is acid-finished,
though Mt. Washington produced both
glossy and acid-finished Burmese ware.
Thomas Webb & Sons called their glass
‘Queen’s Burmese Ware’. The glass was
much used for the patent ‘fairy lights’ or
small individual candle shades so popular
in England and America in the late
‘eighties. Queen Victoria ordered a tea-set
in Burmese glass from the Mt. Washington
Glass Company, enamelled with what was
to become known as the ‘Queen’s’ design.
The ornamentation of Burmese ware was
often of a highly decorative order. Verses
by well-known poets, Egyptian scenes, and
bird and animal portrayals were included
in enamelled motifs. Occasionally, finely
wrought applied decoration w ould be used.
Peach Blow: When a ‘Peach Bloom’
coloured Chinese porcelain vase was sold
for $18,000 in 1886, this caused such a
sensation that products labelled ‘Peach
Bloom’ or —slightly changed ‘Peach
Blow’ attracted many sales. ‘The glaze on
the vase was described as being the colour
of ‘crushed strawberries’. The magic of
the name attracted the attention of manu-
facturers of coloured art glasses, who tried
to devise new types suitable for this name.
Hobbs Brockunicr & Company of Wheel-
ing, West Virginia, produced such a glass
and called it ‘Wheeling Peach Blow’.
Replicas of the ‘Morgan’ vase were made,
like the example illustrated, in both glossy
and acid finishes. The moulded Stand with
its five-headed griffin is in an unimportant-
quality amber glass, hut the vase itself is
made of white opal glass plated with 1
transparent amber glass, made heat-sensi-
tive with gold salts. Reheating caused the
glass to strike a ruby colour, shading to
yellow or amber.
The Mt. Washington Glass Company
filed trade-name papers on the terms
‘Peach Blow’ and ‘Peach Skin’ through
Frederick S. Shirley in 1886. As a
colourant for their new products Shirley
substituted a small amount of cobalt or
copper oxide, instead of oxide of uranium
as in making Burmese. This produced a
homogeneous glass shaded pale grey-blue
to a delicate rose tint in the reheated
portions. When plunged in acid the surface
acquired an all-over slightly grey cast. As
it is a single-layered glass, the shading is
the same on the inside as on the exterior.
The Mt. Washington Peach Blow wares
were manufactured in similar shapes to
their Burmese ware. Moulded and applied
decoration were used, as well as gilding
and enamelling. The example illustrated
shows the ‘Queen’s’ design, as ordered by
Queen Victoria from the firm. The pattern
is of conventionalised flowers in raised
enamel, much of the decoration done in
pure gold reduced with acids.
The success of its Amberina glasses caused
the New England Glass Company to
experiment further with heat-sensitive
glasses. One of the resulting products was
patented by Edward D. Libbey in 1886
and called at first ‘Wild Rose’, later ‘Peach
Blow’. It is a single-layered glass shading
down from red to white in the lower part
of the piece. To produce it, an opal glass
was combined with a gold-ruby glass in
one pot. When a vessel had been formed,
reheating produced the rose colouring in
the required parts. Glasses made from this
metal were moulded, decorated with gild-
ing and enamelling and also acidized to a
satin finish. Occasionally, they would be
left in the original glossy state. The vase
illustrated was decorated by Joseph Locke
for his daughter Nora. The etched reliel
designs covering the surface of the glass
have been outlined and highlighted with
gold traceries and a dark brown mineral
stain.
At about the same time that the U.S.A.
glass-making firms were experimenting
with heat-sensitive glasses, both Thomas
Webb & Sons and Stevens & Williams of
England manufactured shaded wares
which they termed ‘Peach Glass’ or ‘Peach
Bloom’. Webb’s Peach Glass was cased,
the inner layer being creamy coloured with
a slight ly greenish cast in the upper portion.
It is similar in appearance to Hobbs
Brockunier & Company’s ‘Wheeling Peach
Blow’. Stevens & Williams of Stourbridge
produced a glass called ‘Peach Bloom’
which was also very much the same in
appearance. The English Peach glasses
were produced in both glossy and acid
finishes, and arc frequently found with
elaborate gold decoration on both finishes.
Occasionally, Webb’s Peach Glass will
have the Webb incised mark on the base;
Stevens & Williams ware also sometimes
bears a mark under the foot.
The Boston & Sandwich Glass Company,
Sandwich, Mass., manufactured a glass
known as ‘Sandwich Peach Blow’. This
was a single-layered glass, strawberry ice
cream pink in shading, often found in
moulded and twisted swirl decoration; see
the example above, which also has the
characteristic thorn handle of the period.
Overlay decorations in a camphor or
greyish colour are quite usual, the com-
plete piece having an acid finish. Many-
other types of glass are loosely termed
‘Peach Blow’, but basically, apart from a
slight variation in colour shading, the
products can be summarised as follows:
Webb and Wheeling Peach Blow are
always lined, but Mt. Washington, New-
England and Sandwich Peach Blow are
never lined. The Bohemian manufacturers
soon cashed in on the vogue of Peach Blow
wares, producing far cheaper glasses,
which forced the better products off the
markets, though their wares in no way-
resembled those made in America and in
England.

THE JUDGMENT OF PARIS
Nevers, Prance, 1777. Hi. 210 mm (8-25 in.)
Verre de Nevers: This technique origin-
ated in Nevers in the late 16th century, and
it is more closely allied to lamp-working
than to the normal techniques used for
creating glass objects, such as blowing and
moulding. It flourished in Europe for
some two centuries. This delightful group,
depicting the judgment of Paris, was made
in Nevers in the heyday of the glass
figurine, between the late 17th and early
18th centuries. The figures were made by
softening rods of glass of different colours
and winding them over a metal armature.
Every fold of the garments on this group
has a metal base below the glass. When the
glass was sufficiently thick, and after
repeated reheating, it was modelled to
shape with the aid of prods and pinchers. I n
Verre de Nevers groups, decorative details
such as leaves are made entirely of glass,
with no supporting core, while such forms
as birds might be blown.
WINE-GLASS WITH LAMP-WORKED DECORATION
Saxony? early 18th century. 111. 140 mm (55 in.)
Lamp-working is a technique used by
glass-makers to make objects by using only
a single flame as a source of heat. Glass
rods are normally used, held over the
flame and melted or softened to the
desired shape. In modern times, the most
popular lamp-worked objects are small
animals made out of coloured glass rods
melted down, bent and joined to the
required form. Details like eyes are made
by putting a small drop of molten glass on
the object, with possibly another centred
on the first drop to form the pupil. The
ornate stem-work on Venetian and /aeon
de Venise wine-glasses is closely allied to
this technique. One of the rare instances of
true lamp-working on a blown glass is the
wine-glass illustrated, which is one of a
series that have a band of lamp-worked
decoration round the centre of the bowl.
The work stands out in three dimensions
from the bowl, the small Cupid being
almost free-standing; he holds a garnet in
his hand. The provenance of these vessels
is not certain.
TULIP-SHAPED JUG
Karl Kopping, Berlin, c. 1900
I It. .120 mm (126 in.)
Karl Kopping (1848-1914) was a painter
and etcher in Berlin. Between 1892 and
1900 he designed some tall decanters and
goblets made at the lamp from tube glass.
At that time Germany had lor some ten
years been under the influence of the style
for naturalism created by Emile Galle of
France. It became known in Germany as
the Jugendsttl, and Karl Kopping’s exag-
gerated Art Nouveau glass vessels form a
part of this movement. The starting point
for his designs was the flower on its stalk,
and the colours he used could be both bold
and delicate. The stem of the glass
illustrated is in blue, the leaves are in
copper-green glass and the tulip-shaped
bowl has a metallic finish. The piece is
signed on the foot: ‘C. Kopping’. 1 lis work
became popular, and several museums
bought examples of it, but today they are
regarded more as period pieces.
BIRD FOUNTAIN
England, it»th century. III. 4H9 mm (1925 in.)
(See also colour photograph 16))
It has always been the custom for glass-
blowers to amuse themselves in spare
moments by creating fantasies in glass.
These are known in the trade as ‘friggcrs’
—a word which possibly derives from the
Old English ‘Jrician’, to dance. In Scotland
they are called ‘whigmelccrics’. In the
19th and early 20th centuries friggcrs
included elaborate fountains surrounded
by birds with tails of glass fibres and fully
rigged sailing ships on spun glass seas, as
well as the objects mentioned on page 100.
The more elaborate friggcrs are usually
protected by a large glass dome. Friggers
were made for amusement, for family
presents, as an extra source of money, or
even for fully mercantile reasons. Travel-
ling glass-makers who visited fairs and
private houses produced many of these
novelties, having as their kit a bundle of
multi-coloured glass canes and a little
furnace heated by a tallow flame.
The ‘taking away’ or abrasive techniques of
glass-making have as long a history as glass
itself Even earlier, hieroglyphic inscriptions
had been engraved on hard stone vessels, and
we definitely know that as early as the 16th
century B.C. glass was being engraved in
Egypt. Most of this engraving was probably
done with pointed instruments or possibly
with a rotary wheel. Wheel-culling and
wheel-engraving are the two terms most
commonly encountered, and though they are
thought of as almost separate methods,
basically the techniques are the same. In
both, a rotating abrasive wheel cuts into the
glass surface. The mam distinction is that
large wheels are used for cutting, where the
worker holds the glass on lop oj the wheel,
between himself and his tool; and small ones
for engraving, where he holds it below the
wheel, so that he can see what he is doing.
Culling is characterised by large-scale,
geometric designs, usually relatively deeply
incised, and engraving by jine, detailed,
usually pictorial work.
Grinding and Cutting from a Raw Block of
Glass: This was the only ‘taking away’
technique that was used to produce a com-
plete vessel or other object. The method,
which was covered in the first chapter,
dealing with techniques before blowing
was invented, continued in use for a short
time after the 1st century B.C. The ring
illustrated is a good example of the method
used to produce a single decorative object.
One might imagine that a gem or even a
glass cameo was once set in the concavity
left by the glass-cutter at the front of the
ring. (lasting glass in moulds and blowing
glass were so much easier, that this tech-
nique, using rotary abrasion to shape an
object, fell into disfavour. It was con-
tinued primarily as a means of finishing off
already made glass forms, or as a means of
embellishment.
GOBLET BEARING THE NAME OF TUTHMOSIS III
(1504 1450 B.C.)
Egypt III. 130 mm (5-1 in.)
Early Wheel Engraving: The goblet illus-
trated, made of turquoise-blue opaque
glass with a gold ring at the rim and base,
is a famous example of early incised work.
Some glass vessels from the 18th Dynasty
in Egypt are decorated with incised
inscriptions such as that found by Sir
flinders Petrie at Tell el Amarna. A frag-
ment of a bowl at The Corning Museum of
C1 hiss bears a fragmentary inscription
relating to the wife of Amcnhotep III
(1412 1375 B.C.), and is said to reveal ‘the
characteristic tapering ends of wheel cuts’.
Whether the engraving on these early
vessels was done with a point or by means
of a rotating instrument has been tho-
roughly discussed by R. J. Charleston (see
Bibliography). For the most part it seems
that just a pointed instrument was used,
and it was only in the later Egyptian
period that there is evidence of wheel-
engraving on the glass, probably by the use
of a bow-lathe.
SHALLOW BOWL WITH PETAL DESIGN
Roman Empire, 7ih 5th century B.C.
Hi. 39 mm (155 in), diam. 174 mm (685 in.)
In the general Mesopotamia-Assyria-Asia-
Minor region, rotary abrasion was used to
sharpen up decorative motifs, which were
first produced by moulding processes.
There is a large family of bowls with
radiating petal motifs—one being illus-
trated here—the earliest of which is known
to date from not later than 700 B.C. These
were produced by being cast into moulds,
and finished by grinding and cutting. As
abrasive powder on the wheels, emery was
probably used; this was apparently known
in Egypt at least as early as the 18th
Dynasty. The known use by the Egyptians
of tubular metal drills in cutting granite
was probably paralleled further East in the
first millenium B.C. Some such means
must have been employed in the hollowing
out of vessels like the famous ‘Sargon vase’
(see first chapter).
It is not known what type of abrading
equipment was used in Roman times to
decorate glass. It has been suggested that
an all-purpose tool could have been used,
which could be adapted as lathe, drill or
engraving wheel as needed. The Romans
definitely used abrasives such as emery for
cutting, and pumice stone for polishing the
cuts. Probably from Egypt came a group
of facet-cut and ‘diamond’-point engraved
bowls from the ist and 2nd century A.D.
(See Diamond-Point Engraving.) These
are the parent group from which are
descended all late Roman cut and engraved
glasses with figured scenes. The quality of
Alexandrian engraved work deteriorated
during the 3rd and 4th centuries A.D.
However, in the west, from some time in
the 3rd century A.D. onwards, a great
quantity of figured cut or engraved glass
began to be produced in Italy and the
neighbouring provinces, of which the dish
illustrated above is an example.
Figured decoration in engraved work was
not altogether abandoned by workers in
the eastern workshops, as is seen in some
later exports to the west from the east.
However, in general they began to con-
centrate on easier designs, suited to less
skilful engravers, and presumably for more
speedy production. The jug illustrated,
with geometric decoration in friezes, is an
example of the rather rough designs the
West Syrian/Egyptian workshops fav-
oured. It is in dark yellowish-green glass,
which is of rather poor quality, being
bubbly and streaky with impurities. The
fine linear and facet cutting of the earlier
period is not in evidence. Wheel-engraving
was now used to imitate facet cutting, with
designs of curved lines, circles and ovals.
The style took particular root in Egypt,
and probably in Syria also. Many of the
vessels of this type found in the west must
have been imports from these areas.
Diatreta are the most extraordinary and
most outstanding examples of the tech-
nique of abrasion ever made. From experi-
ments carried out by Fritz W. Schafer in
Germany and Barbini and Fuga in Italy it
has been proved with almost complete
certainty that these delicate cage cups were
produced by lapidary means, and not by
any other technique (see Bibliography). A
small battery of wheels and readily avail-
able abrasives, plus the skill of the en-
graver, are all that is needed to make a
diairelum from a solid, carefully annealed
blank. Diatreta are the finest product of
the Cologne and Trier glass-makers in the
4th century A.D. They have been found
in the Rhineland, on the Danube, in
Northern Italy and in Greece. The three
most beautiful, all with inscriptions, came
to light in Cologne. The inscription on the
one illustrated is in Greek, and conveys an
exhortation to drink.
With the decline of the Roman Empire in
the West, glass engraving died out. This
was largely because there was no (ine-
quality glass made after this time that was
suitable for engraving. In the East the
technique never ceased, and glasses with
cut decoration can be traced in unbroken
continuity through Sassanian to Islamic
times. Baghdad and Basra were noted for
cut glass in the 9th century A.D. and later.
In the 9th and ioth cerfturies, after a
renaissance under the dynasty of the
Samanids, a school of relief-cutting flour-
ished in Persia and probably in Meso-
potamia, which in Europe was not rivalled
until the end of the 17th century. The flask
illustrated is an early example of a shape
that was to remain popular throughout the
Islamic period. The scrolling engraved
design was to exert a great influence on the
mind of the Islamic artist.
Hedwigsglas in light brown clear glass, the
gilt-copper foot a later addition
So-called Hedwigsgldser represent the last
wheel-cut glass vessels to be produced in
the Orient, and are recognised as master-
pieces of Egyptian skill. Their origin is by
no means absolutely certain. These thick-
walled glasses carved in hochschnitl (deep
cutting) are maintained by B. Shelkov-
nikov to be the work of a 12th-century
White Russian workshop in Novogrudok,
which was presumably under the influence
of Byzantium. They are certainly a con-
tinuation of the art of rock-crystal cutting,
and more probably originated in Egypt.
The motifs used include stylised lions
and griffins between palm branches, as in
the illustrated example. Two of these
glasses reputedly belonged at one time to
St. Hedwig (1174-1243), wife of the Duke
of Silesia, and it is from her that the glasses
take their name. (Legend has it that the
saint caused water to change into wine in
one of these glasses.) Her niece, St.
Elizabeth (1207-31) also had a Hedwigs-
glas, reputed to give strength to women in
labour, which eventually came into Martin
Luther’s possession.
clp with facet-cltting
Barnwell, Cambridgeshire, England, lasi quarter of
1st century or early 2nd century A.D.
Ht. 90 mm (355 in.)
Facet-Culting is a form of decoration that
goes back certainly to the early Roman
period. Large, broad wheels were needed
to make the facets in the glass. R. J.
Charleston points out that Pliny mentions
some of the abrasives used for grinding in
Roman times, such as ’sand of Naxos’ for
emery, ’sands’ from India, Egypt and
Nubia, and certain stones from Armenia
and Cyprus. He also points out that
Theophrastus mentions pumice and also
emery in his History of Stones. Pliny
mentions Thebaic stone from Egypt and
pumice for the final polishing of marbles.
A wheel with a broad cutting or grinding
edge was certainly used to produce the
facet-cutting on this cup, which is in clear
glass with a greenish tint. Cups like this
found in England and Cyprus are thought
to originate from Western Syria or Egypt
and, in the later 2nd century A.D., from
East Syria.
During the 2nd century A.D. the East
Syrian glass-makers and decorators devel-
oped their knowledge of the art of glass-
engraving including facet-cutting. The
art lived on through Sassanian to Islamic
times. The flask illustrated, in clear glass
with a slight blue tinge, is a typical example
of the continued tradition of wheel-cut
decoration. Oval concave facets cover the
body of the flask, and the neck also has a
ring of facets. Previous to this, in Sassanian
times, wheel-cutting, particularly facet-
cutting, resulted in some striking glass-
ware. Most of the surviving examples from
this period arc cither facet- or linear-cut,
including characteristic shapes such as the
hemispherical bowls with concave cut
facets which were exported to the West
and East, even as far as Japan.
Facet-cutting, particularly for stem-work,
became popular in the second half of the
18th century. Facetted tumblers and
bottles were current in Bohemia, and in
Germany facet-cut knops appear on wine-
glasses from the Laucnstein and other
Hessian glass-houses in the first half of the
18th century. In England at the same time
glass-grinders were facetting the edges of
mirrors, and simple diamond-facetting
was beginning to appear on some glasses.
Scent bottles of opaque white glass and
blue glass, and snuff bottles dating from
about 1770, had all-over facetting and
were often enamelled and gilt. Once
thought to have originated from Bristol,
they more probably came from the Birm-
ingham, South Staffordshire or even Lon-
don area. From the middle of the 18th
century, facet-cutting became an estab-
lished form of decoration in England,
appearing particularly on wine-glass stems,
between c. 1760 to f.1810. Examples can be
found through to the modern period.
VASE WITH FACET CUTTING
By Keith Murray. Stevens & Williams, England,
1939. Ht. 206 mm (8-13 in.)
The architect Keith Murray (b.1893) first
began to take an interest in glass after the
Exhibition in Paris in 1925. He asked
himself why he found the conventional cut
crystal of England so unsatisfactory. After
analysing old English glass, he decided the
glass was better if left plain, or when it was
cut, if the cutting was in a ‘well organised
decoration’, flat cutting being particularly
appealing. The idea of an artist designing
for industry was beginning to be accepted
in England, and in 1932 it was arranged
that Murray should act as designer for
glass for Stevens & Williams at Brierley
Hill, near Stourbridge. During the seven
years he worked in glass he produced
designs for simple unornamented table
services and for some larger pieces. His
most important works are the large vases
and dishes in heavy metal decorated with
facet-cutting reminiscent of early Georgi-
an work. They powerfully express his
architectural feeling, and the decoration
matches the material superbly.
BOWL WITH  FACETTING
By Miluse Roubiekova, Borske sklo, Czechoslovakia,
1958. Diam. 450 mm (17-7 in.)
After the political revolution in Czecho-
slovakia in 1948 the glass industry was
nationalised. The Creative Glass Centre in
Prague was set up in 1952, in order to
establish contact between the glass-works
and the artists and designers, and to
encourage research into new methods of
decorating glass. Czechoslovakian glass
has long been known for its great tradition
in lead crystal cutting, and like its British
counterpart, Bohemian crystal still enjoys
a large public all over the world. The
tradition continues, but finds new expres-
sion in less rigid cut-glass patterns, softer
patterns of a gently formalised character
being increasingly favoured. A good exam-
ple of the new trend is the free irregular
facet-cutting on this bowl designed by
Miluse Roubiekova made at the Borske
sklo, Novy Bor. The usual diamond or
star motifs are no longer in evidence, but
the unsymmetrical lines of the bowl still
enhance the brilliance of the glass.
Later Wheel Engraving: In gem-cutting,
wheels of various materials were certainly
being used by the 15th century to engrave
and polish. By the 16th century, the prin-
ciple of continuous rotary movement had
been established. Engraving equipment
driven by a foot treadle was in use by glass
engravers in the early 17th century. Caspar
I.ehmann, the greatest name in the revival
of glass-engraving in Europe in the late 16th
century, was an engraver of hard-stones
before he was a glass-engraver, and one-
can assume his equipment was more or less
the same for both crafts. Lehmann was
‘Imperial gem-engraver’ to the Emperor
Rudolph II at Prague in 1601, and in 1608
was described as ‘Imperial gem-engraver
and glass-engraver’. From the very begin-
ning, then, the glass-cutter undoubtedly
borrowed his ideas from the gem-cutter,
whose art was so closely allied to his own.
This was a tradition that was to continue
into relatively modern times.
Caspar Lehmann’s engraving is shallow—
because of the thinness of the glass—two-
dimensional and unpolished. Prague was
one of the centres for rock crystal cutting,
and this is reflected in the style of the
engraving, which is flatly cut and gains its
effect from the contrast between the white
engraved lines and the’dark background of
the clear glass. In 1600 I.ehmann obtained
an Imperial Privilege conferring on him
alone the right to practise the art of glass-
engraving in the Imperial domains I le
bequeathed his privilege to his pupil
Gcorg Schwanhardt the Elder, born in
Nuremberg, who worked with him at
Prague. In 1622 Schwanhardt returned to
Nuremberg, where he founded a brilliant
school of wheel-engraving which flourished
to the 18th century. The new potash-lime
glass developed in Bohemia and Germany
in the early 17th century was eminently
suitable for the technique of wheel-
engraving.
COVERED GOBLET IN GREEN GLASS WITH CLEAR GLASS
STEM (DETAIL)
Probably engraved by Hermann Schwinger,
Nuremberg, Germany, about 1665- 80
Hi. 394 mm (15-5 in.)
Schwanhardt’s work in rock crystal and in
glass shows a complete mastery of the
technique of wheel-engraving. His work
was both polished and unpolished, and he
often used as motifs landscapes with
figures, with formal baroque scroll work.
He sometimes added delicate diamond-
point work to his glasses. Among his
pupils were members of his own family,
his sons, Georg the younger and Hcinrich,
and three of his daughters. Other notable
artists among the Nuremberg engravers
were Hermann Schwinger (1640-83) and
Georg Friedrich Killinger (first recorded
1694, died 1726). They all engraved the
same characteristic type of tall goblet,
with hollow knopped stem. The family
of Johann Hess at Frankfort-on-Main
engraved similar glasses in the second half
of the 17th century. Johann Heel (1637-
1709) glass-engraver, silversmith, faience-
painter and engraver of prints in Nurem-
berg also engraved glass in a somewhat
different style, following the motifs he
used in faience painting.
COVERED GOBLET WITH HOCHSCHNITT CUTTING
By Friedrich Winter, Silesia, end of 171I1 century
Ht. 280 mm (11 in.)
{See also colour photograph iH)
During its most flourishing period (c. 1685-
1775) German glass-engraving was done
mainly by unknown artisans working for
themselves in north-eastern Bohemia and
Silesia. However, the best-known work
was done by the engravers to three German
courts. Friedrich Winter set up the first of
these workshops in 1687, with permission
from Count Christoph Leopold von Schaff-
gotsch, at Petersdorf in the Hirschbcrger
Tal. He used water power, and produced
many glasses in the Hochschnitt technique.
Under the patronage of Friedrich Wilhelm,
Elector of Brandenburg, Friedrich Win-
ter’s brother Martin (died 1702) set up an
engraving workshop in Potsdam near
Berlin in 1687. This was also run by a
water-power mill specifically to produce
works in Hochschnitt (deep cutting) and
Tiefschnitt (intaglio work). Martin Win-
ter’s highly gifted nephew Gottfried Spiller
worked here, becoming a partner in 1683.
His engraving included flowers, allegories,
portraits, coats of arms, sometimes in
Hochschnitt, and occasionally he used the
ruby glass of the Potsdam glass-house.

The blank was then subjected to an acid
bath, to give the surface a matt finish.
Knamels were applied somewhat thinly,
except in areas that were to have a raised
design, and these were fired on. The most
popular colours were whiles, tans and soft
pastel shades, though occasionally brighter
colours were employed. The usual floral,
figural, animal, bird and fish motifs of the
Mt. Washington Glass Company were
used on this ware. Ornate handles, finials
and prunts were also to be found. The
initials ‘C apd ‘M’ one upon the other,
with a five-pointed crown above, was the
trademark, though occasionally the crown
was omitted. Thomas Webb & Sons of
Kngland produced a similar ware some
time between 1880 00, as illustrated
above. The New Bedford works may have
produced the so-called ‘Shiny Crown
Milano’, a glossy white opal glass, usually
with gold-coloured floral decoration. It is
found with a red laurel wreath fired to the
bottom of the glass.
In 1870 I lenry Cielhing Richardson of the
firm of Hodgetts, Richardson & Son of
Stourbridge, Kngland, patented a method
for ‘Improvements In Producing Orna-
ments, Designs, And Inscriptions On Or
In Glass’. A wide open-mouthed vessel in
clear glass was made, and when it had
cooled, had a design enamelled on its
inside. The thin-walled vessel was then
heated to a low redness while a second
smaller bubble of opal or other coloured
glass was lowered into it. This was blown
until it attached itself to the inside of the
vessel, thus covering and imprisoning the
enamelled design between the two layers.
The designs were painted so that when the
paraison expanded they did not distort too
much. The same effect could be made by
painting a design in coloured enamels on
an opal or coloured glass and then
immersing this in clear colourless glass to
lock the design in. Once the design was
imprisoned, the glass could be shaped into
the article wanted.
mary gregory vase in green glass with girl and
butter ely net enamelled in white
Atlributcd to Boston & Sandwich Glass Company,
U.S.A., iqth century
So-called ‘Mary Gregory’ glass is a trans-
parent coloured glassware with white or
coloured enamel designs painted and fired
on to the surface. It was a cheap imitation
of English cameo glass, but with a certain
merit of its own. Such wares were made
more prolifically on the Continent than in
America. However, much of the ware has
been erroneously attributed to one of the
older American glass factories in Sand-
wich, Mass., the Boston & Sandwich Glass
Company. The firm is known primarily
for its pressed wares of the early 1830’s,
but later it produced some decorated
glasses, possibly including enamelled glass
of this type. A Mary Gregory is supposed
to have been employed in the decorating
department of the Cape Cod works, which
is the reason for the name given to the
glass. Some genuine Boston & Sandwich
pieces depict young children engaged in
butterfly-collecting, the detail, including
the childrens’ facial features, being beauti-
fully finished.
vase with enamelled decoration
Signed Moser, Bohemia, early 20th century
Ht. 26c mm
Bohemian sources continued to search for
a cheaper method of producing work with
the same surface decorative effect as
English cameo work. They usually
achieved this in Mary Gregory style, with
simulated cameo decoration in extremely
fine white enamel work on overlay vases.
Their work was good, but unfortunately it
depressed the fine English cameo market,
since the genuine cameo work was expen-
sive to produce. In a different category of
enamelling technique comes the work of
Kolo Moser, a Bohemian designer as well
as decorator of glass in the early tooo’s,
who was counted as one of the finer
European glassmen of this period. His
pieces can be recognised by their very fine
enamelling, as in the vase illustrated.
Moser’s work included the introduction to
the market of an amethyst dichroic trans-
parent glass called ‘Alexandria (not to be
confused with the three-coloured ware of
Thomas Webb and Stevens & Williams of
England, which went under the name of
‘Alexandrite’).
VASE WITH ENAMELLED DECORATION
by Maurice Marinoi, France, c. 1920.
Hi. 343 mm (13 50 in.)
Maurice Marinot (born 1882), the most
decisive personality in the history of art
glass between the wars, began as a painter.
Between 1905 and 1914 he was exhibiting
regularly, already showing a tendency for
clear and orderly composition and an
imaginative use of colour. He was intro-
duced to glass-making in 1911, when he
visited the glass factory of Viard near
Troyes, and started to direct the produc-
tion of glass, which he himself decorated
with enamels. His glasses became col-
lectors’ items almost immediately, espec-
ially after his exhibition at the Salon des
link-pendants in 1912. Simple in shape,
they were decorated with the heads and
figures of women. As he began to under-
stand better the technique of enamelling,
his colours became even richer and the
texture finer. The pieces he made after the
First World War showed extraordinary
freedom and refinement, and the colours
had great subtlety, though his pre-war
pieces had a youthful zest which was all
their own.
SPOUTED WINE-GLASS IN CLEAR COLOURLESS GLASS, WITH
GILDING AND PAINTING
Hall-in-ihe-Tyrol, 1536. Ht. 335 mm (1315 in.)
Cold Painted Glass: Unfired colours, such
as lacquer, varnish and oil pigments, have
all been used to decorate glass, but they
easily rub off, and must therefore be con-
sidered a poorer form of coloured decora-
tion than fired enamels. Examples of
Roman glass with unfired paintings have
been found. It is also known that at about
the middle of the 16th century, after
enamelling had gone out of fashion, a form
of decoration in unfired oil colours was in
favour in Italy. Elaborate pictorial sub-
jects were used, often based on Raphael’s
work, with elaborate gilt scroll-work, but
the decoration was naturally very liable to
damage. Unfired lacquer painting and
gilding was used as decoration at the Hall-
in-the-Tyrol glass-house, which flourished
in the third quarter of the 16th century.
The spouted ewer illustrated is typical of
this work. In England, cheaper glass
products of the 19th century, such as
rolling pins and sugar basins, bore unfired
painted decoration.
Adding: The Skill of the Decorator
Lustre-painted Glass: An old technique
which was neither cold painting nor
enamelling, but did involve the firing-on
of a film of pigment to the glass, was known
as lustre painting. Depending on the
firing, the film became more or less
lustrous, and was almost imperceptible to
the touch. Exactly how it was done has
never been discovered, but there is reason
to connect the technique with that of
lustre-painting on tin-glazed pottery which
was practised first in Mesopotamia in the
9th century A.D. The method depended
on the reduction of metallic compounds
such as silver, copper or gold to the
metallic state by means of the carbon in
smoke. Generally speaking, the lustre
produced was reddish-brown in colour.
The technique was first practised in
Egypt, in either the late Byzantine or early
Islamic period, and was probably known
to Syrian glass-makers. In more modern
times platinum and bismuth have been
used as metallic compounds to produce
lusires on glassware (see Iridescent Glass).
Gold Decoration: Gold Sandwich Glass:
Apart from gold included in mosaic glass,
some of the earliest examples of gold
decoration are the gold sandwich glasses
found at Canosa in Apulia, Italy, dating to
the 3rd century B.C. (see Techniques
Before Blowing). After blowing was in-
vented in the 1st century B.C. the tech-
nique of sandwiching gold foil between
two glass layers was not abandoned, but
reached its most prolific period in approx-
imately the 4th century A.D. The majority
of these gilded glasses of the 3rd and 4th
centuries A.D. were found in the cata-
combs around Rome, embedded in the
plaster of the loculi, probably put there by
the relatives of the dead. These early
Christian fondi <f oro, as they are some-
times called, arc in fact the bases of
shallow bowls or dishes. The gold leaf
which was put inside the base ring of the
glass was engraved and sometimes, as in
the above example, had additional painted
decoration. This was covered with a
further protective layer of glass, which
was fused or cemented’to the base of the
bowl.
fragment of a bowi. in gold sandwich glass
depicting christ
lialy, 4ih century A.D. Diam. 90 mm (3′55 >n-)
The glass was broken away to the edge of
the gold decoration, so that a medallion-
like effect was achieved. Sometimes the
outer layer was coloured, but usually both
layers of glass were colourless. The sub-
jects depicted were taken from Jewish and
Christian symbolism and Biblical history,
but pagan motifs also appeared, such as
scenes from games and Classical myth-
ology, and dedications can be found to
circus heroes as well as to saints. The ware
was almost certainly manufactured at a
workshop in or near Rome. The name of a
4th-century A.D. bishop, Damasus, ap-
pears on several fragments, which helps
to date them, and since no more burials
took place in the catacombs after about
410 A.D., this could be assumed to be
their latest date. The workmanship on the
gold sandwich glasses is not usually of high
artistic merit. A disadvantage of the
technique was that air bubbles might get
between the two layers of glass and
disfigure the design.
tumbler in ‘/.mschengoldglas technique
Bohemia, about 1730. Ht. 89 mm (35 in.)
(See also colour photographs /(j and 14)
The gold sandwich technique is believed
to have been used in Rhenish glass
factories in Roman times. Fragments with
painted decoration have been found in
Cologne, in a style not seen on the glasses
from Rome. A series of Byzantine tiles
dating from somewhere between the 6th
and the 12th centuries A.D. differs in
being made up of fused gold glass covered
with a film of colourless glass. The method
was revived in the 18th century in Ger-
many, the products being called Zwischen-
goldgldser. Gold leaf was applied and
engraved on the outside of a tumbler,
which had previously been ground down
for about three-quarters of its height, a
projecting shoulder being left at the top.
A polygonal bottomless glass was then put
over the gold decoration, fitting neatly to
the shoulder. This outer glass projected a
little below the base of the tumbler, and a
further disc of glass, similarly gold-
engraved, was fixed in the space left.
Obviously, perfect precision was needed
if an airtight fit was to be achieved.
Bohemia, about 1710. Hi. 241 mm (9*5 in.)
Silver leaf as well as gold was used in
Zwischengoldgldser, and additions of ruby,
pink and green transparent lacquers occur
on some of the more elaborate later
examples-. This renewal of the gold sand-
wich glass technique seems to have been
concentrated in Bohemia at one or two
workshops. The best specimens date from
the 1730’s, but less skilled work was done
until about 1755. The glasses were deli-
cately engraved in gold with hunting
scenes, figures of saints and shields of arms,
usually of Bohemian families. That the
artists were aware of their early Christian
predecessors seems apparent from the
motifs used for the base discs of their
tumblers, such as the IHS monogram, and
Christian emblems comparable to those of
the early gold sandwich discs. Views of
monasteries and of local Bohemian saints
are among the decorations, the detail on
the gold leaf being scratched on with a
point. Though tumblers were the com-
monest shape used, other forms are found,
such as the covered goblet illustrated.
iimkik with medallions in TwiuhtWtUfUii
Johann Joseph Mildncr, Lower Austria, 1800
Ht. 102 mm (4 in.)
The gold sandwich glass technique was
also used in a highly personal way by
Johann Joseph Mildner (1763-1808) of
Gutenbrunn in Lower Austria. His finely
decorated gift tumblers have medallion
panels, decorated with red lacquer and
gold leaf in the Zwischengoldglas technique,
let in flush with the surface of the glass in
spaces cut exactly to receive them. Por-
traits, monograms, arms, allegories, land-
scapes, still life pieces and representations
of saints were used by him as motifs.
he inserted in his medallions
miniature portraits painted in colours on
parchment. Sometimes the medallions
were inserted in the bottom of the tumblers
as well as on the sides. A poem might be
scratched on the reverse side of the
medallion. Signed works are known be-
tween 1787 and 1808. The glasses arc
usually cylindrical, and are among the best
work produced in the Kmpire period.
Mildner’s technique continued the tradi-
tion established by the ancient Roman
medallions and the Zwischengoldgldser.
Stevens & Williams, England, beginning of 20th
century. Ht. 220 mm (q in.)
Stevens 6k Williams of Brierley Hill,
England, produced a glassware akin to the
gold sandwich glass technique at the
beginning of this century. John North-
wood II was its inventor, and he developed
it about 1000, calling it ‘Silveria’. It was
made by sandwiching a layer of silver foil
between two layers of clear colourless or
coloured glass. Northwood’s method was
to blow the first bubble of glass to almost
full size before the foil was picked up from
the marver on the bubble. It was then
plunged into a pot of hot metal, which put
a protective film of glass over the foil.
Trails of coloured glass, often transparent
green, were put on the surface somewhat
haphazardly. The original silver lustre is
retained as long as no air gets between the
two layers of glass. Pieces of Silveria are
often marked ‘S’ and ‘W’, and the word
‘England’ or a small fleur de lys may
sometimes appear.
picture in verre eglomise
By Zeuner, Netherlands, late 18th century
Ht. 201 mm (8 in.)
Verre Eglomise: When gold or silver leaf
is fixed to the back of a sheet of colourless
glass and etched with a point, the work
known as ‘verre eglomise’ is produced. This
can be backed with colour, e.g., lacquer or
oil pigments, to show through the areas
where the foil has been scraped away. To
protect the unfired painting and gilding, a
layer of varnish or metal foil or another
sheet of glass can be laid on the back of the
object. The term ‘eglomise’1 is taken from
the name of an 18th-century French
picture-framer called Glomy, who used
the technique extensively. It was also used
by an Amsterdam artist, Zeuner; little is
known of him, apart from his signed work,
though he did visit England in 1778, when
he exhibited a ‘landscape in metals’ at the
Society of Artists of Great Britain. Both
Dutch and English scenes can be found,
usually signed by the artist. Some English
views date to the early years of the 19th
century.
PLATE IN verre eglomise
Kngland, early 19th century
Diam. 219 mm (8-6? in.)
SEGMENT OF DISH WITH GILT DECORATION
Italy, first half of the 16th century
Diam. 191 mm (75 in.)
The pictorial and decorative engraving of
gold leaf on glass has been practised since
before the Roman era, although the name
verre eglomise is fairly modern. Early gold
sandwich glasses can be considered to be
a form of verre eglomise, as can the later
forms of gold-glass, such as the Zwischen-
goldgldser. A variation on the theme was
suggested by Johann Kunckel in his book
Ars Vitraria Experimental!! (1679). In this,
in effect, two beakers were made to fit
exactly together as in the Zwischengold-
glaser, the inner surface of the outer beaker
being painted with delicate veining to
resemble marble. The outer surface of the
inner beaker had gold leaf applied, and was
engraved in the usual manner. When the
two were fitted together, a double effect of
marbling and gilding in the glass could be
achieved. The plate illustrated is a skilful
example of verre eglomise belonging to the
early 19th century.
Gilding on the Outer Surface: Gilding is so
often found in conjunction with enamelling
on glass that it is difficult to separate the
two techniques completely. Both gilt and
enamelled decoration are fired to the glass
in an enameller’s kiln. Islamic artists, who
were such great enamcllers, also produced
gilding on their glasses, though true gild-
ing did not usually appear until after the
fall of Fatimid Dynasty in 1171. It was
during the 12th century that the Egyptian
art of gilding glass was transferred to Syria,
when artists from Egypt took service at the
courts of the rulers of Syria and North-
West Mesopotamia. The Venetians also
notably combined gilding with enamelling
on their glasses, the gilding having a
peculiarly light, soft quality. Occasionally
they used gilding on its own for decoration,
as in the dish illustrated, which has an
inscription appearing through a ground of
light gilding.
Gilding put on the outer surface of the
glass was always in danger of being rubbed
off, and with use many poorly gilded glasses
lost all traces of their original decoration.
Unfired gilt decoration (see next column)
would almost certainly rub off. When gold
in powdered form or as thin gold leaf was
stuck to the glass with an oily or adhesive
medium (as described) it could be fired to
it in an enameller’s kiln. This was a far
more durable way to gild glass, but was
rarely entirely successful. Even the gilding
on 18th-century blue, green and opaque
white Bristol glass, which is notably good,
has suffered a little with the passage of
time. The best-known motifs on Bristol
glass are the gilt fret border as on the dark
blue wine-glass cooler illustrated, and a
chain and label inscribed with the names
of drinks, such as Shrub, Rum, Hollands,
Gin and Brandy which are found on many
decanters; the stoppers of the decanters
often bore the initial of the drinks con-
tained.
DSCANTO WITH ENGRAVED AND GII.T DECORATION
France, end ol the 18th century
Ht. 327 mm (12-88 in.)
A somewhat simplified description of the
process of gilding was given first by
Haudicquer de Blancourt in his De F Art
de la Verrerie (1679). The second and more-
convincing method he described involved
painting the surface of the glass with gum-
water, applying gold leaf and washing the
leaf over with a solution of borax. Glass
ground to an impalpable powder was then
sprinkled over the borax, and the vessel
was put into the furnace and fired. Unfired
gilding was described by an English author
in 1735. A combination of chalk, red-lead
and linseed oil was laid on the glass, gold
leaf was applied and, when the solution
had dried, was polished. Dr. W. Lewis,
writing in 1763, recommended a solution
of amber combined with oil of turpentine
and a small amount of white lead and
minium. When this varnish had been
painted on the glass the gold leaf was
applied, the varnish allowed to dry, and
then the gold decoration was polished.
EWER IN BLUE GI.ASS WITH GII.T DECORATION
India, 18th century A.D. Ht. 280 mm (11 in.)
Unfired gilding could never match the
toughness of gilding which was burned
into the surface of the glass. For this, gold
leaf alone could be applied, or a flux could
be used with it. Gold leaf on its own, as
described by Blancourt, demanded an
extreme nicety in the firing of the glass.
When a flux was used under the gold leaf,
the firing was not nearly so difficult, but
the gilding tended to stand out from the
surface of the glass. Instead of gold leaf, a
precipitate of gold could be mixed with the
flux and fired, but the brightness of the
gilding suffered. For polishing the gold,
wolf, bear or hog’s tooth, or polished agate
and Venetian soap and water, were recom-
mended in an 18th-century manuscript.
Among the striking glassware produced in
India between the late 17th and the 19th
centuries were examples of fine gilding.
The glass illustrated is characteristic of the
Mughal industry, the poppy sprays being
a motif much used during the reign of
Shah Jahan (1627-58) and later.
VASE WITH COVER WITH ENGRAVED
DECORATION
Granja de San lldefonso, Spain, second half of
the 18th century. Hi. 508 mm (20 in.)
{See also colour photographs 1$ and 2;)
This vase is an example of the fired gilding
practised at the Spanish royal glass factory
near the palace of La Granja de San
lldefonso, near Segovia. Spain wished to
rival the French and German glass indus-
tries, and thus encouraged foreign work-
men to establish glass-houses from the late
17th century. There was little success until
Juan Goyeneche, with the help of foreign
workmen, managed to produce a good-
quality clear colourless glass. Encouraged
by Queen Isabella, Buenaventura Sit, one
of Goyeneche’s workmen, set up a glass-
house in 1728 near the palace of La Granja,
where he specialised in mirrors and vessels
in the Catalan tradition. First a French-
man, then a Swede, took charge of hollow-
ware manufacture, until 1768, when a
German, Sigismund Brun, took over the
direction of the factory, introducing fired
gilding and cut and engraved decoration.
After a period of expensive mismanage-
ment, the factory passed in 1829 into
private hands, and thenceforward made
only common glass.

BOWL IN DARK RED GLASS, ENAMELLED AND GILT
Byzantine, i ith-t2th century A.D.Ht. 79 mm (3*13 in.)
Theophilus, describing ‘how the Greeks
embellish with Gold and Silver’, said ‘they
take the white, red and green glass, whicb
are used for enamels, and carefully grind
each one separately with water on a
porphyry stone. With them they paint
small flowers and scrolls . . .’. He went on
to describe the furnace in which they fired
window glass, including painted glass, and
specified that the glass be bedded down on
quick-lime. Vasari, who wrote an account
of the stained glass technique of Gugliel-
imo de Marcillat (d.1529) stressed that
‘this burning in of the colours requires the
greatest caution, for if the heat be too great
it will cause the glass to crack, and if
insufficient it will not fix the colours’. To
test the enamel, Theophilus suggested
that you should ’see if you can scratch off
the colour with your nail’. Glasses of the
type described by Theophilus are known,
dating from the 1 ith to the 12th centuries;
one of them is illustrated.
VASE WITH ENAMELLING AND GILDING
Syria, Ј.1320-30 A.D. Ht. 302 mm (11 88 in.)
(See also colour photograph 11)
Not until the 13th and 14th centuries was
the next high point in the history of
enamelling reached, with the great Islamic
mosque lamps and other vessels produced
in the near East, particularly in Syria.
Besides the weli-known lamps which
adorned Moslem holy places, the Syrian
enamellers decorated such objects as
footed bowls, sprinklers, globes, beakers
and long-necked bottles. The vase illus-
trated is decorated with golden arabesques
and fish motifs finely outlined in red. The
inscription round the widest point of the
vessel repeats the words ‘The Wise’
(referring to the God of Mohammed). The
medallions around the neck of the vase
probably contain the armorial symbol of
the nobleman who commissioned the
object. The glass itself is not clear and
colourless, for most of the Islamic glass of
that time is of a brownish or greenish tint,
often clouded with bubbles.
Adding: The Skill of the Decorator
In Islam the art of enamelling came to
maturity from the 13th century, the finest
work being done in Syria. The lamps in
Egyptian mosques exported from Syria
are the most famous examples of all the
Islamic enamelled glass. Strictly speaking,
these objects are lamp-holders or lanterns
rather than lamps, for they enclosed an
oil-vessel which provided the illumination.
They were suspended from the roof of the
mosque by chains which, when the roof
was high, passed through a glass globe or
ball, from where the chains radiated to the
handles of the lamp. Enamelled glass was
used for these lamps, not only for its
obvious decorative effect, but because the
Koran said, ‘God is the light of the
Heavens and the Earth: His light is as a
niche in which is a lamp, the lamp in a
glass, the glass as it were a glittering star’.
Many reproductions of mosque lamps
were made at the end of the 19th century.
Unfortunately, like the Romans, the Is-
lamic glass-making artists left no written
record of the craft which they practised
with such very great skill. It is not until
the 15th century that a contemporary
record of enamelling techniques is found,
but from that time, especially with the
advent of printing, there is no lack of
written evidence. Enamelling on glass was
a speciality of the Venetian glass-makers,
a technique which they developed during
the 15th century, probably reaching tech-
nical maturity by the middle of the
century. In all essentials their enamelling
technique was similar to that of the
Islamic artists, yet it would appear that the
Venetians independently re-invented en-
amelling on glass—possibly borrowing the
idea from the Italian worker in metal. By-
tradition the invention has been ascribed
to the glass-maker Angelo Baroviero.
Throughout the 15th century the coloured
glass the Venetians had invented—blue,
green, white, purple and turquoise—was
richly enamelled and gilded.
GOBLET IN  COLOURED GLASS
ENAMELLED DECORATION
Venice. Italy, late 15th 10 early 16th century
By the beginning of the 16th century the
fashion in Venice for coloured glass had
given way to a desire for clear colourless
glass. Enamelling, along with other forms
of decoration, was usually found on clear
glass specimens from this time, although
the clear metal was far less suited to the
technique. The pictorial work which had
been used so much on coloured glass soon
disappeared, and enamelling was restricted
to a few simple motifs. A favourite of these
was a form of scale pattern in bead-like
dots of enamelling and light gilding,
through which lines were scratched, al-
though simple bands of coloured dots were
sometimes the sole decoration of the piece.
Another familiar motif of the late 15th-
and early 16th-century glasses resembled
a lily-of-the-vallcy or a small fruit with a
calyx attached, as on the goblet illustrated.
This goblet also helps to show how the
Venetians combined their coloured and
clear glass in one vessel.
Although representational painting was no
longer the fashion by the beginning of the
16th century, a transitional phase is
represented by a series of glasses enamelled
with grotesque ornamentation built up
from patterns of flowers, leaves, animal
and human-like forms. Armorial glasses
were probably among the latest Venetian
work in the technique of enamelling. A
shield of arms or an emblem would be
added to the few simple decorative motifs
that were now in use on clear colourless
glass, and at their best, these were very
well drawn, as in the dish illustrated.
However, in some cases there is reason to
suspect that the shields were later addi-
tions. Venetian taste, now inclining to-
wards the new, clear colourless metal,
began to appreciate glass for its own sake
and to be interested more in its quality and
beauty of shape than in its added decora-
tion. By the middle of the 16th century the
technique of enamelling, apart from wares
made for export, had virtually passed out
of fashion in Italy.
beaker with enamelled decoration
Made in Venice for the German market, 1603
Ht. 267 mm (105 in.)
Reuhsadlerhumpen, pale green glass with
enamelled decoration
Bohemia, 1654. Ht. 200 mm (11-4 in.)
Although enamelling became unfashion-
able in Italy, it remained a favourite form
of decoration in Germany until the second
half of the 18th century. The earliest
enamelled glasses thai might have a claim
to being German are some cylindrical
beakers commonly bearing German arms,
but it is now thought that these were
ordered from Venice by German buyers.
The beaker illustrated, inscribed ‘Roccho
Grasl’, is a typical late example of the type.
The most productive enamelling work-
shops in the late 16th and early 17th
centuries were situated in Bohemia,
whence the craft was carried to Germany
by emigrant workmen. German enamel-
ling, with its bold colours, has the attrac-
tiveness of a peasant art, but the enamels
used were not of fine quality nor were the
drawings of any distinction. The glass
itself was relatively poor, and only a few
shapes were attempted: the tall Stangen-
glas, the cylindrical Humpen, jugs, beakers,
and screw-topped spirit flasks.
The subjects used by the German enam-
ellers for the most part belong to peasant
art. Gonventional portraits, simplified
landscapes, scenes of artisans at work,
guild processions, satirical subjects, alle-
gories and inscriptions, usually illiterate
and sometimes obscene, are common.
Biblical subjects, the Emperor and the
Seven Electors and the Reichsadler are also
depicted on these glasses. The Reichsadler
is the Imperial double-eagle, bearing on
its wings the arms with names of a fanciful
hierarchy of the Holy Roman Empire; the
arms are arranged in groups of four in the
so-called Quaternion system derived from
Schedel’s Wellkronik of 1483. They begin
with those of Rome and the three spiritual
Electors (Treves, Cologne, Mayence),
balanced by the four temporal ones
(Bavaria, Brandenburg, Saxony, Palatin-
ate), ending with four ‘Dorffer’ and four
‘Birg’. The Reichsadlerhumpen may have
had some contemporary significance, since
they originated during the strife of the
Thirty Years’ War. The Retchsadler and
the ‘Elector’ glasses remained popular for
a long period.
Adding: The Skill of the Decorator
In the guild regulations of the glass-
makers of Krcibitz in Bohemia (1669) one
of the tasks set the aspiring craftsman was
to ‘prepare with colours an Imperial
Eagle, with all its members, in one and a
half days’. This referred to the Reich-
sadlerhumpen, which most likely had to be
fired more than once, those enamels which
required a higher temperature being fired
before the ones which fluxed at a lower
heat In all essentials the contemporary
descriptions of enamelling agree with each
other, the cakes or beads of enamel being
pounded on marble or porphyry, [he
powder thus resulting being washed and
applied to the already annealed glass vessel
and the glass being carefully reheated so
that the enamels fused to it successfully. It
would seem that enamelled vessel-glass
began to be fired in special ‘muffle kilns’
rather than in the glass furnace itself by
the end of the 17th century. As in ordinary
coloured glass, metal oxides were used to
give the enamels their various colours.
‘SchwarzloT, or black enamelling on glass
was a Dutch invention originally used lor
the decoration of windows; it spread into
Northern Germany, and was developed b\
Johann Schaper in the third quarter ol the
17th century. Schaper was born at Ham-
burg in 1621, was at Nuremberg from
1655, at Ratisbon in 1664 and died in 1670.
Originally a painter of stained window-
glass, he was the first of the South German
llausmaler or independent artists, obtain-
ing undecorated glass and pottery and
decorating it to Ins own invention. I le used
copper oxide mixed with black enamel
pigment, painting this on to the glass ahd
then scratching his design through it with
a needle in the manner of the stained-glass
painter. He painted mainly in black, with
slight touches of red and gold. In the
beaker illustrated he used for inspiration
an engraving of a gypsy procession by
Jacques Callot (1592-1635; Callot’s work,
depicting scenes of Italian life with fan-
tastic caricature, was very popular in the
17th and 18th centuries).
Adding: The Skill of the Decorator
Johann Schaper gained some followers,
one of whom, like himself, was a window-
glass painter. This was Johann Ludwig
Paber, who also painted faience. Herman
Benckcrtt of Frankfort-on-Main was an-
other of Schapers known followers. The
Humpen illustrated is a remarkably fine
example of the Schwarzlot technique,
probably the work of one of Schaper’s
imitators. The scene shows a man being
pushed into a pigsty by a laughing and
gesticulating crowd—presumably for
drunkenness, for the Latin inscription on
the reverse is a diatribe against drinking.
After 1700 the Schwarzlot technique was
carried on in Bohemia and Silesia by
independent decorators. Though they
were using the same medium, in style and
subject their work was very different.
They concentrated on landscapes, hunting
scenes, warriors and scenes from peasant
life, then replaced these by scroll-and-
strap-work, Chinese figures, putti and
fantastic animals.
In Spain a distinct style of enamelling
glass emerged in the late 15th, 16th and
early 17th centuries. It originated in
Barcelona, where glass-makers were in
considerable rivalry with Venice towards
the end of the 15th century. The most
important product of the Barcelona crafts-
men was their enamelled ware, which
surprisingly showed a complete inde-
pendence of Venetian models. The colours
they used for their enamels were notably a
light yellowish-green, in combination with
yellow, white and lavender blue, and
occasionally they used touches of black,
red and brown. Their style of enamelling
has been described as primitive, but also
as powerful in design. The motifs they
used were Near-Eastern in feeling, such as
stylised trees, arabesque foliage, running
animals and pairs of birds. Occasionally,
figures in 16th-century European costume
were used. The vase illustrated was a
favourite shape, showing a typical motif
resembling a small fruit with calyx attached
which was also found on Venetian glass.
Enamelled decoration on glass, though
familiar on the Continent from the 15th
century onwards, was apparently never
attempted in England until the middle of
the 18th century. Two types of enamelling
emerged in the third quarter of the 18th
century, one practised by the Beilby
family of Newcastle-on-Tyne, and the
other practised on the opaque white glass
of the period (see Opaque White Glass).
William Beilby (1740-1819) and his sister
Mary (1749-97) were recorded by Thomas
Bewick, the wood-engraver, to have ‘had
constant employment of enamel-painting
of glass’. William had learned the art of
enamelling in Birmingham, and proceeded
to enamel glasses from about 1762. At
what point Mary joined him in his work is
not known, for their glasses are signed
simply ‘Beilby’. Their brother Ralph
Beilby (1743—1817), to whom Thomas
Bewick was apprenticed, may have had
some influence on their work through his
knowledge of heraldic engraving.
The first Beilby enamelled work was of an
heraldic nature, in both white and coloured
enamel on glasses or goblets with ogee or
bucket-shaped bowls. The Beilbys’ style
changed about 1774, and subjects such as
scenes of hunting, fishing and shooting,
pastoral scenes including ruins, and Chin-
ese subjects appeared, the shapes of the
glasses becoming more diverse. Colours
were not always used on these glasses, and
the subjects were often rendered in white
monochrome, sometimes with a faint tint
of blue or pink. Occasionally they followed
the motifs found on engraved glasses of the
period, such as hops, barley and the flower-
ing vine. Beilby glasses more often than
not have an opaque white enamel-twist
stem. Thomas Bewick became attached to
Mary Beilby, who unfortunately in her
early twenties suffered a paralytic stroke.
The brother and sister left Newcastle-on-
Tyne after the death of their mother in
1778, and went to Fife in Scotland, where
apparently they did not continue their
work.
Hi. 105 mm (4-15 in.)
BEAKER WITH CUTTING, GILDING AND
ENAMEL PAINTING
By Anton kothgasser, Vienna, Austria, r.1825
Hi. 115 mm (4-5 in.)
Many drinking and souvenir glasses with
translucent enamelling still exist which
were decorated by Samuel Mohn (horn
1762 in Weissenfels, died 1815 in Dresden)
and his son, Gottlob Samuel Mohn (born
1789 in Weissenfels and died 1825 in
Vienna). Their chief technical innovation
was the preparation of transparent enam-
els, in contrast with the heavy opaque
enamels used particularly in the 16th and
17th centuries. Samuel Mohn had pre-
viously been a painter of silhouettes on
porcelain. His son, who secured the
patronage of the Emperor, painted sil-
houettes on glass tumblers, as well as views
and allegorical figure-subjects. The Mohns
were among the first to cater for the market
for mementoes caused by the revival of
travel for its own sake, after the finish of
the Napoleonic wars. They worked on a
large scale, helped by apprentices, and
using transfer printing for outlines to
speed up the process, but the delicacy of
their paintings, usually on glasses in the
Ranfthecher form, makes these a worthy
item for collectors.
The Mohns’ discovery of transparent
enamels was further improved by a Vien-
nese porcelain and glass decorator, Anton
Kothgasser (1769-1851). He was a painter
from the Imperial Porcelain Factory, who
started working on stained glass with
Gottlob Mohn. He managed to make his
colours more brilliant than the Mohns’,
and made full use of yellow stain, or the
stain made from a compound of silver, as
used on stained glass windows. His glasses
are usually waistcd, with a heavy cut base
and sometimes lavishly gilt, as in the one
illustrated. Views of towns, portraits,
genre scenes and flowers, sometimes
copied, are featured in his work. His
glasses have been described as the finest
examples of the Viennese Biedermewr
style. Kothgasser and the Mohns had
many pupils and many imitators. In the-
same movement was Franz Anton Siebel
(1777-1842) of Lichtenfels in Upper
Franconia.
PERFUME BOTTLE IN COLOURLESS GLASS,
ENAMELLED AND GILT
Emile Galle, France, dated 1880
I li 157 mm (613 in.)
‘CROWN MILANO’ EWER WITH ROPE HANDLE
Ml. Washington Glass Company, U.S.A.
Ht. 254 mm (10 in.)
Emile Galle (1846 1904) the great French
glass-maker, is less well-known for his
enamelled work than for his work in the
field of cameo glass. Yet he was an expert
in the art of enamelling, and showed this
gift in his first major exhibition in Paris in
1878. It was there that he established his
reputation as an inventive and original
glass artist, using—among other tech-
niques—enamelled decoration on triple-
cased glass with gold leaf insertions. At the
exhibition in Paris in 1884 he showed
examples of clear colourless glass decorated
with enamelling, cutting and engraving.
At the 1889 Exhibition in Paris he showed
his finest works. His colours had taken on
a new softness, and a fresh note of lyricism
could be sensed in his work. The decisive
factor in his work seems to have been
Japanese art, and after 1889 he developed
to maturity the ‘nature-style’ that was to
epitomise his thoughts and ideas and was
to bring him his greatest fame. The
singular lyricism ol his work can be seen in
the enamelled perfume bottle illustrated.
An elegant painted and enamelled glass-
ware was produced by the Mt. Washington
Glass Company, New Bedford, Mass.,
towards the end of the 19th century. It was
first called ‘Albertine’, though a ware that
was the same in texture, shape and
decoration was advertised more cxotically
as ‘Crown Milano’ in about 1890. Unless
the perishable paper label survives, ‘Al-
bertine’ cannot be differentiated from
unmarked ‘Crown Milano’. Frederick S.
Shirley and Albert Steffin of that firm were
issued with a patent in 1886 for a means of
decorating an opal glassware. The articles,
which had a convex ribbed body, were
treated as follows: a perforated corrugated
stencil was laid against them; pulverised
carbon was dusted against this, which left
a design for the enameller to follow when
the stencil was taken away, so that there
was no distortion in the finished product.
When ‘Crown Milano’ was made, a blank
in white opal glass was shaped by free-
blowing, moulding or press-moulding.

THE TRIUMPH OF THE GIRANDOLE
The other most characteristic form of earring of the i 8th century was the girandole, which was fashionable throughout the whole of Europe. In the early
j 8th century it tended to have a horizontal shape, the three drops more or less of the same size and at the same level, and the central motif clearly defined and simple in design. Later it became more vertical in emphasis with a longer and larger central drop and a more elaborate central motif.
Above and opposite right: Late i 8th-century girandole earrings from Spain, set with emeralds and diamonds, a characteristic feature of Spanish jewellery. The elaborate central motif combines leaves and spray of flowers.
Centre top: French, circa I 76os, set with foiled rubies and diamonds, the drops and the central motif articulated. The combination of rubies and diamonds and the elaborate bow motif place it in the second half of the century.
Middle: English, second half of the T 8th century, set with foiled garnets. Note the rather stiff design and the clearly defined ribbon motif. The colour of the garnets is enhanced by bright pink foiling.
Bottom: Portuguese, circa 1750, set with foiled topazes. The choice of the gemstones — topazes from Brazil, then a colony of Portugal — and the linear and flat design are typical of Portuguese jewellery.
THE ELEGANT PENDELOQUE
A collection of late i 8th-century silver and diamond pendeloque earrings. These examples show some of the many variations of the pendeloque design, from the cluster, ribbon bow and pear-shaped drop (right and opposite above) to the articulated and elaborate swing centre (centre and opposite below). Note the use of silver as setting metal to complement the whiteness of diamonds. As is normal at this time, all gemstones are mounted in closed settings.
IBERIAN STYLE
Right: A gold and hessonite garnet earring, Catalan, probably early i 9th century. The striking design is a development of the traditional pendeloque design with a cluster surmount, an elaborate floral spray centre and an elongated pear-shaped drop. Many examples are extremely long and heavy, requiring special mounts to support their weight.
Opposite right: A collection of i 8th- and i 9th-century gold earrings, Portuguese and Spanish. These earrings exemplify the persistence, in the Iberian peninsula, of the pendeloque motif based on
surmount, ribbon bow and elongated drop. The great variety of design includes the traditional pendeloque conceived as a cluster surmount set with emeralds or rose diamonds supporting a bow and a pear-shaped drop; the ‘Brincos a Rainha’ with its wide, almost circular, drop with swing centre, entirely pierced in high carat gold; the elongated spindle-shaped earrings chased in gold with scroll motifs known as ‘Fuso’, and the bow pendants (centre of page).
Detail of a portrait of Mary, Countess of Macclesfield, by Francis Coates, exhibited at the Society of Artists in 1763 and much admired by Horace Walpole. The Countess is wearing fashionable diamond girandole earrings.
REFINEMENTS OF THE 18TH CENTURY
Opposite far left: A Portuguese silver and white topaz earring of girandole design, first half of the i 8th century, and (below) front and back view of a diamond girandole earring mounted in silver. The back view shows three typical features of the girandole: the closed setting of the stones; the articulated and detachable drops that allow the earring to be worn in a reduced form; and the additional hoop, through which a ribbon was threaded and secured to the hair.
This page:
Illustrations from 18th-century literature on earrings. Top: An extract from the ‘Discours Preliminaire’ of the Recueil des Dessins by A. Duflos, 1744, where the author expresses his concern about the excessive weight and elaborate design of girandole earrings. Above, left to right: French engraved designs of two girandole earrings and one pendeloque earring by F. LeFebvre (active circa 1635-57); a page of French engraved designs for six girandoles by Pouget, 1762; six engraved designs for pendeloques and girandoles by J. Quien, 1710, published posthumously in London in 1762; and two designs for a two-stone or double-cluster earring, by Duflos, 1744, a fashionable form that cannot be classified as either girandole or pendeloque.
Centre left: A page of French designs by Maria,
175 1-70, engraved by Babel, illustrating fashionable pendeloques and girandoles.
Below left: Four engraved designs for pendeloque and girandole earrings, by an anonymous Italian, circa 1770.
THE PENDELOQUE: Centre right: An unusual and colourful pair of earrings, late T 8th century, set with
THEME AND VARIATIONS cornelian plaques within diamond borders.
Right: A pair of diamond pendent earrings, Russian, mid-i 8th century. The interest in large cushion-shaped brilliant-cut diamonds mounted in closed silver settings is a typical i 8th-century feature.
Opposite: Four pairs of pendeloque earrings mounted in silver or gold and silver with colourless gemstones such as white topazes and rock crystal.
Opposite far right: A pair of diamond pendeloque earrings, English, late i 8th century. Note the large rose diamonds in silver closed settings and the rather severe design typical of many English creations of the time. And (bottom far right) a pair of topaz pendeloque earrings and a matching devant de corsage, Portuguese, mid-i 8th century, interesting for its combination of light yellow and foiled orange stones.
Below: A collection of English diamond jewellery, late i 8th century, comprising typical pendeloque earrings and a flowerhead dress ornament.
OUT OF THE MAINSTREAM
Below: A mid i 9th-century portrait by Joaquin Argasot y Juan of a Spanish lady wearing a pair of large gold and gem-set earrings of girandole inspiration, proving how long earrings of this type continued to be popular in the Iberian Peninsula. Their size explains why additional fittings were required.
Right: Silver and rose diamond pendeloque earrings, probably Flemish; and gold Iberian earrings set with topazes, of modified girandole design, similar to those in the portrait above.
Opposite, top left to bottom right: Gold and gem-set Spanish earrings, a variation of the Catalan type but with a much more slender outline; Catalan earrings; gold Iberian earrings set with emeralds; and garnet Catalan earrings. All on this page late i 8th/early i 9th century.
PEARLS, GEMS AND GLASS
Below: A pair of seed pearl and ruby girandole earrings, Southern Italian, mid-18th century. The use of minute seed pearls threaded on a filigree structure is a typical feature of many Southern Italian and Adriatic jewels of low intrinsic value. Even so the design presents the most typical features of the girandole: cluster surmount, bow and detachable drops.
Opposite: A pair of gilt-metal and glass girandole earrings, probably Italian mid- i 8th century, using copper coloured aventurine glass with gold spangles cut and faceted as if it were a precious stone. Glass paste of various colours was frequently cut and set in i 8th= centuryday jewellery, and even aristocratic ladies who owned precious jewels did not disdain to wear it. The smaller pictures show two pairs of Iberian earrings set respectively with rose diamonds and emeralds, late i 8th century. One is modelled on the traditional girandole, the other on the pendeloque form, which in this region retained their popularity well into the 19th century.
A pair of spectacular Southern Italian gold and seed pearl pendent earrings, late i 8th century. Although this particular type seems to be confined to Southern Italy and the Adriatic regions, its structure conforms to the contemporary pendeloque design. The use of seed pearls had been a typical feature of jewels of this area since the I 7th century, providing an extremely successful and decorative alternative to jewels set with precious gemstones.

SHERATON PERIOD
THE last of the eighteenth century designers, Thomas Sheraton, came to London from his native town of
Stockton-on-Tees about 1790 rare antique marble . Although he had undoubtedly been a practical cabinet maker, there is no evidence that he ever made any furniture in London myott son & co from the 1920s . Certainly he never had a prosperous business such as Chippendale and Hepplewhite had had antique gilt wood mirror frame . His fame in the furniture world rests upon his book, The Cabinet Maker and Upholsterer’s Drawing Book, published in 1791-1794, and appearing in further editions in later years antique mahogany tea table with glass tray .
It was essentially different from Chippendale’s book, the purpose of which was mainly that of a catalogue to appeal to wealthy patrons 1700’s trestle table . Sheraton’s drawing book was primarily a trade book intended to help the practical man, not only in providing designs but also in supplying a treatise in geometry, perspective, and drawing eighteenth century tripod table . In the long run it brought him posthumous fame, but as a commercial proposition it was a failure 17th/18th century style, open-rack oak dresser . Probably few practical men were interested in learning to draw in perspective or to know of the problems in geometry (except in the limited way it affected the setting out of their work), and in looking back the whole thing certainly seems an ambitious undertaking wellinton chest of drawers .
So far as the designs were concerned, Sheraton certainly showed originality in many of the mechanical movements he introduced, and in the design of his chairs, but it must be confessed that the general run of furniture was little more than a representation of the general style prevailing at the time antique oak drawleaf trestle table . It was noted in Chapter VIII that Hepplewhite and Sheraton furniture (excepting chairs) had a great deal in common ; so much so that it is often impossible to say to which it belongs for sale louis 16th walnut sideboard cabinet . It will be realised then that in speaking of Sheraton furniture it represents for the most part the work of a school of craftsmen working in a certain style sheraton 18th century dresser .
antiquegames writing table . BEECHWOOD
ARMCHAIR antique tripod tilt table .
About 180 mahogany bow fronted chest of drawers scottish .
The chair is painted In
black and gilt, and the
rails of the back have
small decorative panels
painted with floral and
musical Instrument sub-
jects masons patent ironstone chinese peony .
FIG english antique reproduction dining table round with add on leaves . 142a carved seating . MAHOGANY
ARMCHAIR where can i buy a rennie mackintosh table with brass lion paws .
Late 18th century thonet bentwood rocker .
The backs of Sheraton chairs were usually lower than those of other contemporary work cutlery boxes . The sweep of the arms into the back is a characteristic Sheraton touch central part of the library has a display cabinet .
Details found in Sheraton Chairs
In his chairs, however, he undoubtedly did strike an original note georgian kneehole cabinet . They are lighter than the majority of other late eighteenth century examples, the backs are lower, and instead of the top rail forming a more or less continuous sweep with the uprights (see Fig french console table 1830 . 131) it was frankly a separate item tenoned between the uprights dining tables art deco . The legs were either turned or square tapered (see Fig antique 2-tier pedestal table . 151), and the arms, instead of bowing out sideways, were usually shaped in
FIG antique maple desks . 143 arts and crafts +jupe table . MAHOGANY CHAIR art deco kneeling dancer lamp .
Late 18th century georgian peat bucket .
Sheraton used both square tapered and turned legs horses as allegorical figures in art . The cabriole
type was never used old english pattern forks with four tines .
side elevation only, generally springing from the back in a continuous sweep fine porcelain arc .
A good example is given in Fig smith furniture gateleg drop leaf table . 142 empire hall bench . Note the obvious way in which the back rails fit between the uprights (compare with Fig fake brass antiques . 131), and the sweep of the arms into the uprights spanish lacquered cabinet inlaid . The whole thing is different from anything else being made at the period art deco console and germany . The curve of the arms into the turned uprights, the curved turned legs, and the graceful design of the pierced back are typically Sheraton 19th century american rosewood rococo console table . It is painted all over (something else that no other designers SIDEBOARD DECORATED WITH SATINWOOD INLAY BANDINGS catherine the great of russia plates . Late i8th century charles neo classism boulle .
The bow front sideboard became extremely popular at this time antique trestle refectory table . Sometimes the space between the centre
legs was title in with a cupboard having a tambour front made to slide sideways pottery german weimar art deco .
Tapered Legs in Sheraton Chairs
attempted), and some extremely fine art work is put into the small panels of the back florence lamps giuseppe antique .
Another Sheraton chair, this time with tapered legs, is given in Fig who sells maggiolini furniture . 142a decoration metal bureau table desing . In this case the arms meet the turned uprights more or less at right angles, but they sweep into the back as in the previous example extending glass table with wrought iron legs . The back is practically square, and the uprights which continue down to form
II how drop leaf table evolved .C; antique serving cabinet . 1 a & s smee finsbury .15 round “dining table” “six legs” . WHEEL BACK CHAIR irish cabinet makers antique wine coolers .
About i800 antique porclean handled sheffeld flatware .
The finest chairs of this kind came from Norfolk and Suffolk value of primitive antique work bench . They became popular towards the end of the 18th century, and into the 19th century lowenfink . Earlier models had curved arm supports at the front instead of turnings antique drum shaped table .
the legs are shaped only in side elevation wood furniture legs clawfoot . They are straight when looked at from from the front art glass vases antique . This is another feature invariably found in Sheraton chairs, and never in contemporary work of other designers scriptoire . All these features also appear in the chair in Fig oak table 5 legs built in leaves rectangular antique . 143•
Sheraton died in i8o6, and it is unfortunate that towards the end his designs suffered severely decorative spindle legs from antique card table . Probably no man, no matter how individual, is quite free from extraneous circumstances bread/cake baskets 17th century . Prevailing fashions exert their sway, and designers
146 varguenos . TWO WRITING DESKS IN MAHOGANY WITH SATINWOOD BANDINGS antique pedestal mahogany table .
Late i8th century bauhaus style furniture +scale .
The Importation of Ykirious foreir4n fancy woods, satinwood, am boyna, rosewood, ebony, and so on led to the free use of
these for use in inlay bandint!s art nouveau antique drinking cabinet . Satinwood, too, was freely used in the solid, entire pieces being made up in it antique 17th century dresser .
Deterioration of Late Sheraton Work
are often faced with the choice of either following them or retiring from the scene antique mahogany card table, imperial . Many things were happening in Europe at the close of the eighteenth and beginning of the nineteenth century which were to affect design gilt metal mounted pier table . The French revolution, culminating in the establishment of the First Empire, produced a style in France which rapidly found its counterpart this side of the Channel, and the naval victories of this country had an extraordinary effect on furniture 1800 hundred french mantel and candle clock .
FIG antique art deco furniture black lacquer . 147 maurice adams art deco . MAHOGANY SIDE TABLE WITH BANDED DRAWERS anglo indian cabinets .
Late i8th century vintage buttterfly dropleaf tables .
A prominent feature of the Sheraton school was the very limited use of
carving antique 17th century dresser . Probably it was a reaction from its free use in the Chippendale
period dutch cabinet marquetry 18 .
Just as topical events of thirty or forty years ago were commemorated in fretwork designs, so the furniture of the early nineteenth century showed its reaction to the events then happening gillows bow front mahogany chest drawers .
Sheraton fell into the general line and published his E’?IcYc10P,Tdia of 1804-1807, in which was one of the most extraordinary collections of furniture designs ever put together regency occasional table . Naval emblems of all kinds—anchors, lifebelts, pulley blocks, ropes, and so on—abound, and it is a mercy that more of them were not made up,
To revert to his earlier and happier period, Sheraton’s chief form of decoration was inlay 19th century parian busts . Cross-bandings of fine
MAHOGANY WARDROBE WITH BUILT-UP VENEERED
DOORS
Late i8ti century antique chinese circular revolving bookcase .
The fine mahogany imported at this time led to the revival of the built-up
patterns in veneer as the grain had splendid decorative value 17 century elm gateleg table .
foreign woods, such as satinwood, rosewood, tulip wood, ebony, amboyna, and so on, were inlaid around the edges of drawer fronts and panels, and various built-up patterns in veneer were made use of with great effect period style display cabinets . The bow front sideboard in Fig antique ceramic tambour german mantle clocks . 144 shows the use of this cross-banding italy spoons that might be antiques . Painting also he used considerably, naturalesque floral subjects and panels in the style of Angelica Kauffman being the chief forms it took nicholas sprimont solid silver . Carving he used
E; <
FIG value of an antique pembroke table . 152 antique mahogany french bedside commode . MOULDINGS OF THE SHERATON PERIOD dutch 18th century walnut chest on chest .
Mouldings were invariably small and delicate islamic influence furniture . Occasionally carving and inlay
were introduced, though they were usually plain dining tables with wood inlay work .
sparingly and never in the full scrolling form favoured by Chippendale french console table 1830 .
A small Sheraton side table is given in Fig arts and crafts furniture, antique collectors . 147 flemish refectory table . Here again the drawers have an inlaid cross-banding around the edges antique german breakfast table . The turned legs are reeded down their length dresser accessories . Two other Sheraton pieces are given in Fig russian chippendale trays . 146 silver candleabras made in england . Note the inlay again decorative writing styles . Desks of this kind were often fitted with elaborate secret contrivances in which stationery boxes, drawers, and cupboards rose up at the touch of a spring how common is walnut drop leaf table .
The Sheraton Wardrobe
Fig antique chinese chamber pot . 148 shows a fine inlaid wardrobe in which built-up patterns in veneer are used effectively myott son&co hanley 1880 . The dentils in the cornice and the flutes in the frieze are carried out entirely in inlay american crafts armchair upholstered . The curved bracket feet are a typical feature of the late 18th century 17th century oak side table .
CHAIR WITH SABRE LEGS AND
CANED SEAT rococo style flower arranging .
About i8io pembroke style end tables .
This is an extremely fine example of the chairmaker’s craft 18th century marquetry . Despite the somewhat complicated curvature of the back the construction follows conventional methods, the tops of the back legs being tenoned into the cresting rail and the moulded shaping worked across the joints mark vezzi porcelain . The curved rails fit together with a form of halved joint cylindrical crock eared handles cobalt blue .

THE AGE OF THE DESIGNER
HEPPLEWHITE PERIOD
HEPPLEWHITE began his career as a cabinet maker
at a time when the art of cabinet making was at its ifullest tide kakiemon porcelain . The second half of the eighteenth century is often called the golden age of cabinet making, and by I- `6o, when Hepplewhite settled in business at Cripple-gate, the standard of design and craftsmanship was at its zenit1h walnut tripod tea table . The Chippendale school was still in its prime, and they was a strong group of craftsmen who had ingrained in the — a fine trade tradition, a thing which implies something more than a mere ability to use tools antique card table collectors . It means a sense of appreciation and a certain element of originality, tempered with the convention that belongs to a workshop where everything is done by hand silver tripod table .
George Hepplewhite was one of these practical men english bristol teapots . He was scarcely a designer in the sense that Robert Adam was antique english stoneware identification . He did not sit down at his drawing board and sketch out purely original designs, but his work had characteristic features that can usually be recognised andre’ japaneese porcelain . As a cabinet maker he knew his job perfectly, and, in addition, he had a keen appreciation of fine line which enabled him to give his work a certain individuality in a way that would be beyond a man of no imagination eighteenth century women dressing in front of men in their bedchamber . In this sense he no doubt influenced the trade considerably, but beyond this he simply worked in a certain style which a group of cabinet makers was following angouleme guerhard . His name has come to be attached to that style probably because of his book, The Cabinet Maker and Upholsterer’s Guide, and that was not published until 1788, two years after his death antique wooden pot cupboard .
It is apparent, then, in speaking of Hepplewhite furniture a general style popular from about 1760 until practically the end of the century is implied rather than the work of Hepplewhite himself as an individual dutch antique furniture . A great deal of furniture no doubt was made in the workshop at Cripplegate, but except in a few rare instances it is impossible definitely to identify it antique drop-leaf bread table .
Taken generally, Ilepplewhite furniture was comparatively simple antique blue glass kidney shaped end table . There were a few touches of decoration (usually applied), but even the most ornate specimens had nothing like the elaboration found in the richer Chippendale pieces english porcelain parian . Several new forms of decoration were introduced or revived, for whereas Chippendale work had little other form of decoration besides carving, Hepplewhite furniture had
FIG (chineseexportporcelaincoffeeservice) . 130 tambour commode . SHIELD BACK CHAIR french art deco porcelain jaguar .
1770-1780 spoonback armchair .
One of the finest chairs produced in the 18th century “antique collectors blog” .
For all their lightness these chairs were extremely strong art nouveau jugendstil jugs .
being made in the finest mahogany and of the best work-
manship multipurpose dressing table .
inlay, painting, and gilding in addition to carving glass table antique ceramic legs . The inlay usually took the form of bandings and strings in satinwood, rosewood, ebony, and so on, and was in fact very similar to the inlaid work usually associated with Sheraton glass boudoir lamp deco . Carving was of small classical subject, vases, festoons, draped cloth, and swags of husks, an entire departure from the elaborate scrolling acanthus leafwork of the Chippendale school duke extendable dining table .
It is perhaps in the chair that the Hepplewhite charac-
HOOP BACK
CHAIR antique empire or regency style mahogany bookcase .
1770-1780 english seventeenth century cabinets .
A favourite motif of Hepple-
whitewere the ears of wheat ball and claw tripod table antique . These appear at
the top of the pierced splat
in the back 18th century wardrobe .
11
FIG carved japanese tea table . 132 edgar brandt reproductions snake lamp . OVAL BACK
CHAIR pennsylvania house antique sideboard .
1770-1780-
The French influence is
strongly marked In this
chair world market carved brass charger plate . Except for this
French form the cabriole
leg was never used by
the late 18th century
designers antique silver sphinx .
SIDEBOARD WITH BREAK FRONT DECORATED WITH INLAY pembroke end table .
Late i8th century,
It was not until towards the end of the 18th century that the sideboard with drawer and cupboard accommodation
was made epergne antique for sale . It was evolved from the side table with separate pedestals recipe for “soft paste porcelain” . It is difficult to distinguish between
Hepplewhite and Sheraton pieces as both had a great deal in common italian deco furniture .
The Shield Back Chair
teristic is most marked de coene freres . Probably the most famous type is the shield back, of which an example is given in Fig small sutherland table . 130- A really fine example of a shield back ranks amongst the most beautiful things ever produced, but, like the cabriole leg, first-rate examples are rare antique folding “coaching table” . The truth is that it takes a first-class chair maker of considerable experience to make one properly, the difficulty being that the shaping runs in three directions 16th century english joyned table . There is the shield shape seen from the front, the backward rake, and the concave plan shape antique table turned legs . To incorporate all these to form one harmonious whole is something that calls for a great deal of skill and experience antique inlaid table birds .
As a rule the main back framing had a channelled moulding worked all round it, and the probable reason for this was that it helped to emphasise the shield shape steuben stemware deco . It will be realised that, although the lower part of the shield appears to be in one piece, it is in reality in three dresser with mirrors & teardrop pulls & ogee bracket . The side portions in fact continue down, forming the back legs, and a curved bottom rail is fitted in to complete the shape between them 18th century marquetry . By channelling the wood the shield appears to be in one unbroken piece william iv jupe extending circular . The front legs of these chairs were invariably tapered louis sue .
The chief outside influences of Hepplewhite were the Adam and the French raoul dufy, plates ceramique . Of the latter there was Louis XV, which showed itself in the cabriole leg exemplified in Fig classical work/sewing table mahogany,3 drawers,carved legs, pedestal paw feet . 132 olive green and iron red oriental porcelain . Note the French scrolled foot and the flat shaping which continues along the front seat rail in an unbroken sweep arabisque furniture in ny . Another French influence came from the Louis XVI, and one result was the use of the turned leg 18th and 19th century silversmithing . An example of this is the settee in Fig antique spoons italy silver ornate . 129 papier mache tray-c19th .
Other typical Hepplewhite chair backs are the hoop back, of which Fig antique drop leaf or gate leg tables, ,ny . 131 is an example, the oval back (Fig antique 5 leg oak drop leaf table . 132), heart shape, and that with the serpentine shaped top rail curving into the uprights mackintosh wooden chairs .
Pieces such as sideboards, writing tables, bureaux, chests of drawers, tallboys, wardrobes, and so on were, as already mentioned, extremely like Sheraton furniture, and are dealt with more fully in Chapter X curved back chair from 1940s . The bedstead in Fig french chamber pot bed tables . 129 is a four-poster, very like one appearing in Hepplewhite’s book, and shows the general restraint in treatment walnut tripod tea table .
Fig clawfoot dresser . 133 is a sideboard belonging to the last few years of the eighteenth century trestle table double column . It has characteristics of the Hepplewhite style, but there are others which belong equally to Sheraton, and, as we are dealing with what might be termed schools of design rather than the work of individuals, it is apparent that one can do little more than term it late eighteenth century antique french empire . It is probably the work of a cabinet maker whose name has not come down to posterity, and who worked in the traditional style of the period edwards & roberts furniture .
THE AGE OF THE DESIGNER
ADAM PERIOD
N one important sense Robert Adam was entirely
different from the other outstanding characters with
-whose work this book deals serpentine top breakfast table . He was an architect by profession, not a practical cabinet maker, and in turning his attention to furniture he was not in any way fettered by any convention which a tradesman might have 19century british armschairs . It is not suggested that the convention of a good trade tradition is bad ; it is one of the healthiest influences a craft can have ; but it simply is a statement of fact that Adam was able to approach the subject from a fresh angle italian inlaid tea table . He worked from his drawing board and passed on his designs to be carried out by a practical cabinet maker porcelain spanish dancers .
He had travelled a good deal in France and Italy, and on his return in 1758 he set himself up as an architect and rapidly became very successful antique furniture prohibition bar examples . As a result of his foreign studies he was influenced considerably by the classical school, but he had a strong individual turn, and as a result his work had a characteristic touch which made it different from that of other architects working in the classical style antique drop leaf table for sale . It was delicate and refined (some term it effeminate), abounding in small intricate detail, and it superseded largely the rather heavier work of such architects as Sir William Chambers “empire designer, best known for pedestal tables with curved legs .
His connection with furniture was that in designing an interior he included the furniture as an essential part of the scheme blue china tea set with silver inlay england . To the average architect the work was finished when the walls and ceiling had been decorated, but Adam required every detail, even to the ornaments on the sideboard, to harmonise with his ideas japanese portable cherry wood tea tables . Perhaps the most notable example is that of Harewood House, in which the furniture was designed by Adam and executed by Chippendale antique ball and claw desk .
Although there were marked characteristics in Adam furniture, one has to be wary in accepting a piece as genuine Adam Characteristics
Adam chinese furnture form mid 19th centuary . The fact that he had to employ practical cabinet makers, combined with his great success, soon led to a great deal of imitation simple european furniture . In fact, of all the ” Adam ” work that has survived only a very small part can be identified as owing its origin to Adam himself regency period casters .
FIG porcelaine antique motif ming . 137 louis the 14th chair . DINING TABLE WITH FLAP AND PIVOTED BACK LEG japanese laqure tea table .
Abotd 1775•
This is one of a pair of tables Intended to be placed together when used
for dining silver flatware wood handle . The front rail is in reality a drawer front brass ornaments for furniture empire style . It now stands In
the Victoria and Albert Museum South Kensington 1828 sideboard buffet .
self was an individual and original designer, ” Adam ” furniture was, for the most part, the work of a school working in his style antique wood drop leaf table .
Adam used many methods of decoration in his furniture antique oak dropleaf gateleg table . The carving had definite characteristics shearers cupboard heavy . The acanthus leafage was finer and more delicately treated than in the full scrolled form which Chippendale had favoured, and, in addition, he used chains of husks, the honeysuckle device, Greek key, vases, drapery, plaques carved with mythological subjects, rams’ heads, and grotesques antique empire furniture . Inlay and marquetry, too, were revived, and were carried out in satinwood, tulip-wood, rosewood, amboyna, harewood, and so on biedermeier antique de . The subjects were similar to those of the carving furniture designersgerman . Another form of decoration was painting in the style of Angelica Kauffman meissen porcelain antic . A popular treatment was to make these painted panels the main feature of a design of scrolling acanthus leafwork
FIG antique dishes germany pastels with scallops . 138 henry clay bed and furniture . SEMI-CIRCULAR ADAM SIDE TABLE ferniture leg in itali .
T770-1780 antique table in europe .
An extremely fine piece of cabinet work carried out In mahogany antique vase markings newcastle.. on. tyne 1762 . The
curved top rail is veneered, the grain running crosswise 17 century elm gateleg table . The centre
panel and the oval pater2e are typical features brass frame girandole images .
and husks 17th and 18th century french silver marks . In some few instances, too, Wedgwood plaques were introduced bidet square .
A typical Adam sideboard is shown in Fig lion antique mahogany dining table . 136 royal sheffield silver . Properly speaking, it is a side table with two pedestals, but the three pieces were intended to stand together and form a whole In some cases the pedestals were actually joined to the table, though the result never seems quite so successful furniture of meiji period . It gives one the impression that the three pieces were actually separate at one time and were fixed together antique silver candelabras made in england . It is true that there was a general tendency to make the sideboard a single unit, but it was only when the pedestals lost their indivi-The Adam Sideboard
duality as such that the result was really a success labels under boulle furniture . The Sheraton sideboard in Fig makers of antique tea tables . 14 wheat shaped dining table base .4 exemplifies the point furniture  finmar ltd . The origin of the pedestals can just be traced, but they are essentially a part of the design as a whole “art, nouveau”"chiparus”"deer” .
The pedestals owed their origin to the lack of accommodation in the side table andres rosewood solid wood . If one refers back to the side table of Chippendale’s time in Fig chromed trestle table leg . 11 5 it is obvious that its only use was to provide standing space on its top directoire phyfe sofa . There were no drawers or cupboards in which table furniture could be kept opalescent glass perfume france . It fell to Adam to introduce the pedestals antique walnut telescooic dining table . Sometimes they were fitted up with metal grids to enable hot irons to be placed in the cupboards, so providing ? means of warming plates The urns at the top either had metal containers in which iced water was kept, or they were fitted up to hold cutlery antique rosewood armoire with claw feet . The more ornate specimens were often carved with rams’ heads, drapery, husks, and other devices selling japanese tea tables antique .
Towards the end of the century the cabriole leg practically died right out 18th century chippendale dresser . Adam never used it upholstered wood chairs from 1930s . In most cases he preferred the square tapered leg with small square feet fashion 17th century . They were usually recessed in their tapered portion, a pendant of husks often being carved in the recess near the top old gate leg table ball feet . The leg at C, Fig second hand old oak table in staffordshire . 139, shows this detail antique ladik rug . Another common treatment was to carve a series of flutes along the length, the lower part often being filled in with reeds (see A in Fig french antique occasional tables . 139)•
A particularly fine example of an Adam dining table is given in Fig important american girandole mirror . 137 english hepplewhite dressing table . It is one of a pair napoleon antique campaign chair . In use the two would be placed together, flap to flap, so forming one large table meals in eighteenth century england . The flap is supported by a single leg made to pivot frosted glass vase with smokey streaks . Thus when not required for dining the tables could be placed flat against the wall and become useful side tables antique chinese circular revolving bookcase . The decorative treatment is well worth noting antique porclean handled sheffeld flatware . The tapered legs are fluted on all sides except one, this being carved with a crisscross design set in a recess antique table round drop leaf claw foot . At the top are paterx carved with leafwork theodore haviland 1958 pattern . The fluted top rail with the plain centre part carved with swags of husks is typically Adam english stoneware marks . He invariably introduced this centre panel french meals17th century .
An example of a small side table with turned and carved legs is given in Fig furniture cupboard design,side board,wood . 138 george hepplewhite bottle case . It exemplifies well the delicate treatment of which Adam was so fond meissen porcelain animalsfrederick augustus . Note the use of the centre panel again, this time of quite plain form see a silver sauceboat with a heated base . Other kinds of Adam legs and feet are given in Fig antique glass top tea table bird . 139•

19th Century Victorian English Busts and Statues
Parian, or “statuary porcelain”, was possibly the most significant ceramics development in Britain during the Victorian period. Named after the Greek island of Paros for its resemblance to the white marble quarried there, parian was a bone china that contained a high degree of feldspar, which meant that it did not need a separate glaze. Decorative wares could therefore be displayed without becoming dirty, unlike earlier biscuit, or unglazed, white porcelain, which was coarse and difficult to clean. First made in the 1840s, parian was capable of being moulded without losing any detail, with the result that contemporary sculptors could have their works successfully reproduced for the mass market. Parian was also made in the USA at the United States Pottery in Bennington, Vermont.
IMPORTANT MAKERS
There remains Uncertainty as to which factory invented parian. The firms of Minton & Co. (est. 1793) and Copeland (1833-1933), both in Stoke-on-Trent, claimed to have discovered the secret; both were making parianlike porcelain by the mid-1840x, and at the Great Exhibition of 1851 in London they displayed an extensive range of parian subjects. Other famous makers included Royal Worcester (est. 1862), Coalport (est. c.1796), and Wedgwood (est. 1759), all of whom made a range of wares, figures, and busts, while Wedgwood also made impressive, large figure groups. Smaller portrait busts were the speciality of Robinson & Leadbeater (est. early 1860s), in Hanley, and others were made by the firm of Goss ( 1858-1940), in Stoke-on-Trent. Parian dominated English porcelain production for display objects for about 40 years, and a great deal survives.
PORCELAIN BUSTS AND STATUES
Models for parian were provided by eminent Victorian sculptors, whose full-sized statues could be reduced in size and reproduced in quantity for commercial sale without losing quality. The work of contemporary sculptors such as John Bell (1812-95), Raphaelle Monti (1818-81), and Sir Thomas Brock (1847-1922), together with famous Classical statues housed in museums, could be reproduced and sold to a wide public. A device known as “Cheverton’s
Reducing Machine”, patented by Benjamin Cheverton in 1844, was developed to allow subjects to be scaled down and cast in moulds for the ceramics factories. Busts were made of various subjects, including royalty, politicians, philanthropists, poets, composers, and
characters from antiquity. Figures ranged from meaningful allegories to barely disguised eroticism; for example, The Greek Slave, a controversial sculpture by the American sculptor Hiram Powers (1805-73), was displayed at the Great Exhibition of 1851 and copied by Minton & Co. Many parian figures were made either for the Art Union of London or for the Ceramic and Crystal Palace Art Union, which were lotteries set up by philanthropic Victorians to raise funds for the arts; parian works were frequently offered as prizes. The manufacture of artistic parian gradually diminished in favour of the large-scale mass production of portrait busts, and little of any consequence was nude after c.1880.
• BODY fine, highly vitrified, generally pure white
• FINISH matt, semi-matt, or with a slight surface sheen
• PRODUCTION usually slip-cast, therefore quite light
• FORMS sentimental figures; figures Of politicians, royalty, and composers; literary, religious, and allegorical subjects; copies of famous Classical statues housed in museums; works by Victorian sculptors
• IMPORTANT MANUFACTURERS Minton & CO.,
Copeland, and Robinson & Leadbeater

Dress Accessories
Style and fashion were an important part of the Deco era. Styles changed drastically for women, reflecting a more practical and carefree or casual attitude toward life. The clothing from the Deco years chronicles that transition. The long, corseted gowns of the late Victorian period changed to the knee length skirt and flat chested “boyish” look of the 1920’s. Padded shoulders, tight skirts and baggy trousers followed in the late 1930’s and 1940’s. Although there were changes in men’s clothing, styles remained conservative compared to the trends which came about with women’s apparel.
Although time has been unkind to old garments, vintage Deco clothing is collectible, and there are dealers who specialize in fine examples salvaged from the period. Markets for this type of clothing are usually commercial or public, sold for store displays, museum exhibits or theatrical production rather than for individual use. But dresses, suits and coats made from the 1920’s through the 1940’s currently attract some of the teen and college age generations who enjoy actually wearing the outfits. Estate sales and thrift shops may yield some amusing examples at nominal prices.
While it may be difficult to find a piece of Deco clothing which one would care to wear, a number of items used to accessorize such clothing can be worn with enjoyment. Purses, compacts, belt buckles, dress clips and all types of jewelry are quite compatible with today’s fashion. Dress accessories offer the collector an intriguing and almost unending source of Deco designs. It is apparent from the items shown, as is true for most surveys of the era, that dress accessories were primarily confined to women’s articles. But cuff links, stickpins and watches, for example, were made in Deco styles for men.
Compacts are a product of the Deco age. These neat items made for checking or repairing one’s make up, slipped easily into a purse or evening bag. While most contained a bit of mirror and a cake of powder, some were made with lipstick cases, change holders and money clips as well. The most expensive are made of gold and silver, but lower priced varieties made of plated or enamelled metals and celluloid or plastic are also available. Although small in size, compacts exhibit striking Deco traits. Notice the Egyptian influence on two examples, one with hierglyphics and one with Egyptian figures.
Mesh evening bags made from enamelled metals by American manufacturers such as Whiting and Davis were in demand during the 1920’s. Small beaded and fringed bags were also popular accessories for the jazz age costume. Evening bags have become a special topic of collector interest and there are few bargains to be found. It is difficult to find one for less than $50. Large beaded
purses, like the one illustrated, made during the latter part of the era do not cost nearly as much.
Collections of compacts and evening bags can be framed or housed in glass cases to add attractive touches to a room. The same can also be done for much less money with buttons or belt and shoe buckles. These little adornments are sometimes overlooked, but they often created the Deco accent for a garment. Such pieces usually outlived the clothing and many have been saved. Rummage through a box of old buttons and buckles, a Deco souvenir may be found—even a pair of fancy garters!
Jewelry is undoubtedly the most fascinating of all dress accessories. Although gold, silver and precious stones were fashioned into Deco designs, costume jewelry was born and thrived during those years. Many pieces were made from glass, enamelled metals, bakelite, celluloid and plastic. Rhinestones, like other good pieces of Deco costume jewelry, are attracting wide interest today. It is obvious that Deco designs have had a great influence on contemporary costume pieces. Reproductions also are surfacing on antique and collectible markets. Buyers should inspectjewelry carefully to determine if an item is new. Prices for authentic “period” period” pieces are often comparable with those of good quality modern costume jewelry.

Dresser Accessories
Assorted grooming tools can be grouped under the category of dresser accessories simply because the dressing table or vanity is where they were usually kept. This category offers not only variety but also a plentiful supply of Art Deco collectibles. Like dress accessories, men’s dresser items are few in number compared to women’s. Comb and brush sets, cuff link boxes and shaving mugs may be found, however.
During Victorian times, the dresser “set” was in vogue. A set basically consisted of a tray with a matching powder box and hair receiver. Other pieces such as a “Patch” box, pin box, ring tree, talcum shaker and even a chamber stick were sometimes included. The sets were usually made of porcelain, glass or silver. Their popularity carried over into the Deco era, although ring trees and hair receivers seem to have diminished popularity during the latter years.
Shapes and decoration of dresser sets gradually began to reflect the changing trends in designs. The floral and fanciful Art Nouveau decor of the late 1890’s gave way to streamlined and geometric stylized designs in glass and silver. Porcelain sets began to have more vivid handpainted decoration, often with sharply contrasting colors. Deco dresser sets were also made in celluloid, or French ivory, as it was sometimes called. Hand mirrors, manicure tools and even perfume bottles were made to complement the celluloid sets.
Powder boxes, which might also double as small
trinket boxes, are the most collectible items from the complete dresser sets. While it may be difficult to find all the matching pieces of an original set, surviving boxes are quite numerous. They were made in so many different sizes and with such diverse decorations that the search for a “different” one does not become boring. Collections can be easily and attractively displayed. Some of the boxes made during the Deco years were decorates with a nude or semi-nude figure on the lid. Others were even shaped as a figural box as shown in one example here. Powder boxes, like figural bookends, offer an opportunity to acquire a Deco figure for considerably less than a statue or figurine.
Other dresser accessories include combs, clothes brushes, hair brushes, jewelry boxes and perfume bottles. Collector interest in perfume bottles rivals or surpasses interest in powder boxes. Some of the famous European glass manufacturers of the period such as Lalique, Baccarat and Moser designed bottles with sharp Deco styles for perfumes and colognes made by various cosmetic firms. Today those original bottles are quite expensive, but others made by American glass companies, often unmarked and thus not attributable to a certain firm, are affordable. Even colognes sold in dime stores at the time which were bottled in Deco style containers or in dark blue, green or red glass are snapped up by collectors today.