Posts Tagged ‘Exhibition’

covered goblet with engraved portrait ok carl
Landgrave of Hesse-Cassel, by Franz Gondelaeh,
Germany, c. 1700.
Spillcr’s contemporary and pupil was
Jager, an outstanding glass-
engraver. He was born at Reichenberg in
Bohemia, appeared in Berlin in 1606 and
was made a member of the Berlin glass-
cutters’ guild in 1606. Both Spiller’s and
Jager’s glasses often show crisselling (a
network of tiny cracks in the glass), a
defect found in the Potsdam glass used at
the Berlin workshop. The third engraving
workshop to be set up for a German court
was that of Franz Gondelaeh (or Gunde-
lach) for the Court of the Landgrave Carl
of Hesse Cassel. Gondelaeh, sometimes
called the greatest German master of the
art, was born at Gross-Almerode in Hesse
in 1663 and becameJiirstlicheGIasschneider
to Carl in 1695. It is not known when he
died, but he was still described as Hof-
glasschneider at Cassel in 1716. He some-
times used Potsdam glass for his work,
occasionally marking his pieces with an
eight-rayed star.
It is only towards the end of the 17th
century that a genuine distinction between
glass-cutting and glass-engraving can be
made. For the first time it is obvious that
different types of equipment were being
developed for cutting and for engraving.
The glass-engraver’s equipment was light
enough at this period to be carried, where-
as the glass-cutter’s equipment, used for
facetting, intaglio (deep cutting) or rough-
ing out for finer engraving, was hardly
portable. The large interchangeable
wheels for cutting were rotated on a heavy
hand-turned cutting machine, a form of
equipment which survived until the
modern period. By the end of the 17th
century, water power was in use for turn-
ing the wheels, and was probably used to
do the all-over facetting as an obligatory
prelude to the engraving on glasses of
Bohemia and Silesia in the 18th century.
Intaglio or Hochschnitt cutting would not
have been possible without this extra
power.
The Bohcmian-Silcsiart glass-engraving
industry produced glasses that were event-
ually exported as far as Persia and the East,
as well as all over Europe. The Bohemian
workshops were predominant in the late
17th and early 18th centuries, but after
1725 Silesia overtook them in importance.
There were workshops in Schreiberhau,
Hermsdorf, Kynast, Warmbrunn, Peters-
dorf and Breslau, as well as other places in
the Hirschberger Tal. The finest Silesian
work occurs partly in the Rococo period,
when characteristic forms appear, such as
shell-shaped, lobed and scrolled cups,
which were frequently gilded as well. Most
of the work remains anonymous, but some
of the finest work is known to have been
done by an artist of Warmbrunn, Christian
Gottfried Schneider (1710-73). All other
German centres remained subordinate to
the Bohemian-Silesian workshops, but the
name of Anton Wilhelm Mauerl (1672-
¦737) of Nuremberg should be mentioned
for his work with its accent on Chinoiserie.
By the beginning of the 18th centur;
wheel-engraving as a decoration on glass
(often of English manufacture) was be-
coming established in popularity in Hol-
land. The chief exponent of the art there
was Jacob Sang, a Saxon who worked in
Amsterdam. Dutch wheel-engraving was
very German in style, and certainly at first
was the work of German craftsmen resi-
dent in Holland. Jacob Sang engraved and
signed a number of glasses with dates
between 1752 and 1769 during his stay at
Amsterdam. He was probably related to
Andreas Friedrich Sang, the Thuringian
glass-engraver. In 1738 A. F. Sang was
recorded at Weimar, as Hoch/iirstlich
sdchsiscke Glasschneider. His son was the
Brunswick Court glass-engraver, Johann
Heinrich Balthasar Sang. Wheel-engrav-
ing had already been practised in Holland
in the first half of the 18th century,
possibly by another member of the Sang
family.
WINE-GLASS ENGRAVED 165 mm (6-5 in.)
DRINKING GLASS IN COLOURLESS GlASS WITH
ENGRAVED DECORATION
John Frederick AmelungGlassworks, L.S.A. 1703
III. 220 mm (805 in)
A group of engraved glasses thai enjoys
great popularity with collectors comprises
the so-called Jacobite glasses, all engraved
with symbols of the Jacobite cause in
England. The various emblems include the
star, oak-leaf, butterfly, caterpillar, grub,
carnation, forget-me-not, lily-ot-the-val-
ley, daffodil, honeysuckle and sunflower.
The most important symbol, however, is
undoubtedly the Jacobite Heraldic Rose,
which may have six, seven or eight petals,
representing, it is thought, the Crown of
England. Other glasses have actual por-
traits of Prince Charles Edward, the Young
Pretender, engraved (not very skilfully) on
their bowls. The words FIAT, AUDEN-
TIOR UK) and REDEAT are often found
on these glasses. The exact significance of
each symbol, including buds in relation to
the roses, is the subject of much discussion,
bin no one yet knows all the answers. The
majority of the glasses have air-twist
stems, but baluster stems and opaque
twists are also lound.
Some of the most noteworthy engraved
glass of North America was produced at
John Frederick Amelung’s glass-works
which was established at New Bremen
near Frederick, Maryland, in 1784. Efforts
to establish a glass industry had been made
during the 17th century, notably at James-
town in Virginia, where the first attempt
was made around 1608. However, the first
successes in the business were scored
mainly by Germans and Englishmen in the
18th century, when several important
glass manufactories were started, the
Amelung glass-house being the most
successful. It operated for only one decade,
but its clear glass decanters, glasses and
goblets set a high standard. The glass
illustrated is European in style, showing a
sturdy form and restrained engraving,
with foliage and a finely drawn inscription
‘George Trisler’ and the date 170.!, en-
closed in the foliage. The shallow wheel-
engraving found on these glasses often
features commemorative inscriptions and
dales
The period of prosperity after the Napo-
leonic wars known in Germany as the
Biedermeierzeil brought about the revival
of the art of glass-engraving, particularly
in Bohemia. Massive feet and bold poly-
gonal facetting are characteristic of these
heavy engraved pieces. The commoner
examples arc somewhat clumsily engraved,
but the finer pieces are equal to anything
from the previous periods. Glass-engravers
tended to work independently and to move
about; thus Dominik Bimann (1800-57)
worked at Prague, but went to Franzens-
bad during the season, and August Bohm
(1812-90) visited England and America.
Romantic landscapes and hunting scenes
showing faithful perspective were popular.
The Pelikan family of Meistersdorf near
Kamnitz and the Simms of Jablonec were
also notable engravers in this style.
Engraving through a silver stained surface
to clear colourless glass was popular, as in
the goblet illustrated, which has engraved
panels flashed with clear yellow glass.
It is worth while taking a close look at 19th
century English wheel-engraving, since so
much of it is still to be seen. As Hugh
Wakefield points out, the early years of the
century could truthfully be called the
heyday of cut glass, and engraving was
only used where cutting could not reason-
ably be used on a glass vessel. Simple
wheel-engraved motifs appeared often
enough on wine-glasses, and larger vessels
might have lettering in the form of mottoes
and inscriptions. Floral and other plant
motifs were used effectively as in the loving
cup illustrated. On the other hand, repre-
sentatives of figures were unusual, and
appeared only on the more special pieces.
Difficult subject matters were avoided, and
it could be said that engraving in the early
years of the 19th century was considered
suitable only for commemorative pieces
and for the bowls of wine-glasses, where
cutting could not be used.
Kngraved by a member of the Wood family of
Brettell I ..me, Kngland, 1840-50
Hi. 209 mm (117; in.)
JUG WITH  DECORATION
Shown ai the 1851 exhibition by J. Ci. Green,
Kngland. Ht. 337 mm (13*25 in.)
In the early 1840’s surface stains were
being used in the Stourbridge area on
glassware, broad flute cutting being added.
The stain was normally ruby-red, derived
from copper rather than the yellowish-
brown given by silver. The bottle illus-
trated is ruby-red stained and was en-
graved by a member of the Wood family of
Brcttell Lane, near Stourbridge. The
bottle forms part of the movement in the
1830*1 and 1840’s, when the scope of
engraved work seems to have widened in
England. The Wood family had an im-
portant engraving shop in Stourbridge
around the 1840’s, and Thomas Wood was
established enough to produce an inde-
pendent display for the 1851 exhibition.
\i the firm of Thomas I lawkes in Dudley,
near Stourbridge, William Herbert and
the rest of his family were becoming noted
during the 1830’s for the engravings they
produced for the firm. It was soon to
become apparent that wheel-engraving
was a technique well suited to Victorian
taste.
Shapes popular for wheel-engraving in
Victorian times included globular decan-
ters and water carafes. These forms were
developed in the early years of Victoria’s
reign, and proved so suitable to the
technique of wheel-engraving that they
probably helped to popularise it. The
hemispherical champagne glass introduced
about this time could only be whccl-
engraved and not deep-cut. At the 1851
Exhibition the most significant engraved
glass was that exhibited by the London
dealers, particularly by the firm of J. G.
Green. Their ‘Neptune’ jug, a large Greek
oinochoe shape elaborately engraved, was
much illustrated at the time and is
illustrated here. The oinochoe shape be-
came very popular in the later part of tlu-
cent ury, but the most usual shapes for
engraving for the late 1850’s, 1860’s and
1870’s were footed ovoid shapes used lor
decanters, claret jugs and vases. These
were blown thinly, and offered a large ana
By Frederick E. Kny, Thomas Webb & Sons,
England, probably later 1870’s
Ht. 308 mm (12-13 in.)
The decanter illustrated was engraved by
the Bohemian Frederick E. Kny, one of
the most distinguished engravers in Eng-
land in the 1860’s, who remained prom-
inent for the rest of the century. He had a
separate workshop on the premises of
Thomas Webb & Sons at Stourbridge.
He, like other artists, favoured the well-
known three-lipped decanter shape for
engraving. This shape, as seen in the
illustration, with its high shoulder and
spherical stopper, often with a tiny ball
finial, was a result of the current admira-
tion for Greek pottery forms. It looked
best when blown thin, and called for the
lighter work of wheel-engraving for decor-
ation. The shape came into its fullest
popularity in the early 1870’s, appearing
in the Stevens & Williams pattern books in
January, 1871, and in the Thomas Webb
and Richardson firms at roughly the same
time. By the last decade of the century it
was one of the best-known international
shapes.
The Techniques of Taking Away
JIG WITH ENGRAVED FERN PATTERN
John Eord, Scotland, about the i88o’s
Hi. 247 mm (075 in.)
Another shape that was most popular for
wheel-engraving in England in the 1860’s
was the tankard-shaped water jug, with
straight, slightly tapering sides. This style
of jug was used for fine engraving until
near the end of the 19th century, but since
then the shape has become too common-
place for such elaborate treatment. Motifs
for engraving in the 1860’s were Renais-
sance arabesques and Greek-inspired de-
signs, while in the later 1860’s and 1870’s
naturalistic designs of flowers, birds and
hunting scenes became more common.
The fern patterns on the jug illustrated
originated with the Scottish firm of John
Ford of the Holyrood glass-works. To-
wards the end of the 1850’s an emigrant
Bohemian, J. H. B. Millar, set up a work-
shop for engraving glass in Edinburgh,
closely connected with the firm of John
Ford. He introduced the fern patterns at
the London exhibition of 1862 and they
remained very popular for a long period.
VASE WITH ‘ROCK CRYSTAL.’ ENGRAVING
by Frederick K. Kny, Thomas Webb & Sons,
Kngland, abou” 1880. Hi. 235 mm (0/25 in.)
WINE-GLASS WITH INTAGLIO FLORAL ENGRAVING
Slcvcns & Williams, Kngland, about 1000
Hi. 159 mm (625 in.)
A new style of decoration appeared in
England towards the beginning of the
1880’s, which was called ‘rock crystal’
engraving. What differentiated the new
technique from normal wheel-engraving
was that all parts of the work were
polished, instead of the engraving being
kept unpolished to contrast with the
surrounding surface. This uniformly
bright appearance led to a new approach
in the design of the engraving. Instead of
the engraving being a pattern on the glass,
it took over the whole surface of the vessel
and became deeper cut, and more in the
character of carving. The effect was an
even more sumptuous method of decorat-
ing English lead glass, in line with the
international trend for brilliant cut glass,
and it was also in keeping with the
simultaneous development of carved cam-
eo glass. The workshops of F. E. Kny
(see illustration) and of William Fritsche,
which were attached to Thomas Webb &
Sons, produced ‘rock crystal’ glass
throughout the 1880’s and 1890’s.
‘Rock crystal’ glass was produced in
France in this period, and possibly Thomas
Webb’s work was inspired by the work of
the French glass-makers. Stevens & Wil-
liams at Brierley Hill near Stourbridge
also produced ‘rock crystal’. In the early
1880’s there was a phase when ‘rock
crystal’ pieces were made to imitate
Chinese jades. The final fling for Victorian
engraving came with Stevens & Williams
intaglio work of the 1890’s, as in the wine-
glass illustrated. Intaglio is deep engraving
carried out on wheels that would normally
be used for cutting, a technique some-
where between cutting and engraving. The
names of John Northwood and Joshua
Hodgetts are particularly associated with
the development of this method. The
technique was worked out at the beginning
of the 1890’s, and was an established part
of the Stevens & Williams output by the
later 1890’s. It was also being used by
American firms, such as T. G. Hawkes of
Corning, New York.
Intaglio work was produced notably by the
firm of L. C. Tiffany at the factory at
Corona, Long Island, in the U.S.A.
towards the end of the ioth century and
the beginning of the present century.
Their ‘intaglio’ glass differed from English
intaglio, since besides referring to the
cutting and engraving of glass, the term
also referred to the practice of applying
contrasting coloured glass in the engraved
parts and re-cutting so that engraved work
appears on decorative inlays. The flower
and leaves on the vase illustrated have been
treated in this manner, being in contrast-
ing colours to the base glass. Glass that
had been cut or engraved either in intaglio
or in cameo relief by the Tiffany factory
was always referred to as ‘Carved’ in their
brochures and catalogues. The glass fac-
tory also produced simpler relief-cut
objects without colour contrasts and used
coppcr-wheel-cngraving on many of their
vases, bowls, lampshades and tablewares.
The finest achievement of Wilhelm v. Eiff
(1890-1943) was his work in high relief
(Hochschnitt) on glass. He raised it from a
miniature art, giving the technique the
dignity of sculpture. Von Eiff was the son
of a craftsman at the Goppingen branch
of the Wiirttembergische Metallwaren-
fabrik, and at a very early age mastered the
techniques of engraving both metal and
glass. He worked for a time in Lalique’s
jeweller’s studio, and also with the famous
glass-engraver Charles Michel in Paris. In
1913 he paid a short visit to the Art School
in Stuttgart, and in 1921 he worked for a
while with the glass designer Stephan
Rath. In 1922 he was appointed professor
in cutting and engraving on glass and
precious stones at the school in Stuttgart.
He had a great influence on his pupils, who
now can be found from Scotland to Japan,
doing work in many different ways, from
each other’s products as well as from v.
‘GIRLS PLAYING BALI-’
engraving by Edward Hald, Orrefors, Sweden, 1019
BOWL IN PALE BILE GLASS ENGRAVED WITH ANGEL
AND DANCING MAIDENS
By Simon Gale, Orrefors, Sweden. 1927
Hi. 160 mm (63 in.)
Of great importance to the history of art
glass were the appointments in 1916 and
1917 respectively of Simon Gate and
Edward Hald as designers to the glass-
works at Orrefors. Edward Hald (b. 1883)
was a painter who had studied with
Matisse in Paris, and had already designed
pottery for the factory at Rorstrand.
Orrefors, founded in 1898, is situated in
Smaland, the main glass-producing dis-
trict in Sweden. Here, Hald had to learn
the very basics of glass-making from K nut
Bergqvist, master glass-blower at the
factory from 1914. It was the engraved
glass produced at Orrefors which won the
factory its first international fame. There
was already an engravers’ shop at Orre-
fors, with Gustaf Abels at its head, before
Gate and Hald were appointed. As soon
as they settled in, they began to experi-
ment with this technique. Hald preferred
a more delicate approach to engraving
than Gate’s style, producing exquisite
objects like the vessel illustrated, directly
inspired by the art of Matisse.
Simon Gate (1883-1945) the first glass-
designer employed by the Orrefors glass-
works, was the son of a prosperous farmer
and trained as an artist in the grand
classical manner at the Academy in Stock-
holm. Like his contemporary Hald, he had
to learn glass-making from the beginning
when he joined Orrefors, and he concen-
trated first on the art of engraving. The
style of the early engraved work of the
Orrefors glass-works reflects the taste for
luxury products in prosperous post-war
Stockholm —an elegant nec—classicism.
Within this tradition both Gate and Hald
developed their own styles. Gate’s work is
noted for the heaviness and large dimen-
sions of the vessels, decorated in deep
carving with figure subjects from the
Bible, classical mythology and like sources.
It is claimed of Orrefors that no other
glass-works has had such an international
influence over glass-production. For the
first three decades of this century the
attention of the glass-works was directed
to the art of engraving glass.
Jarosla Horejc (b. 1886) is a glass designer
of Hungarian origin. One of Drahoftov-
sky’s pupils, he produced for the Paris
Exhibition in 1925 four vases with en-
graved decoration, one illustrated here,
decorated in magnificent classical style
with figures cut in very high relief
(Hochschnitt). The well-known Viennese
glass firm, J. & L, I.obmeyr was estab-
lished in 1823; since that date three
generations of Lobmcyrs had worked as
dealers in and refiners of glass in Vienna.
In 1918 Stephen Rath, a nephew of
Ludwig Lobmcyr, established a branch
cil the firm called ‘J. & L. Lobmeyrs Neffc
Stephan Rath’ in the North Bohemian
town of Steinschonau (or Kamcnicky
Seno). Here glass was made to Rath’s
specifications and decorated to the design
of artists by the finest engravers of the
district. Horejc’s work is a direct result of
this; in 1962 he was still continuing his
classical tradition of engraving with richly
varied figure subjects from the Lobmeyr
Studio.
John 1 lutton was born in New Zealand in
1906. He is probably best known for his
work in England, at Guildford, and for the
engraved panels he produced for Coventry
Cathedral. The freencss of his style of
engraving owes much to his equipment, a
movable wheel driven through a sheathed
flexible shaft by an electric motor. Water
is fed to the wheel by a wet piece of cloth
held in a bracket attached to the hand grip.
Instead of applying the glass to a stationary
wheel in the conventional manner of
engraving, Hutton is able to move his
wheel at will over the whole surface of the
glass. The result is a fine, shallow, light
engraving with rather a rough finish.
Hutton has translated some of the Coven-
try figures on to large vessels produced by
Whitefriars, one of which is illustrated.
His art is forceful and dramatic, and
reveals a new facet to the technique of
engraving glass.
Steuben Glass Works, U.S.A., 1045-50
Hi. 1525 mm (6 in.)
Frederick Carder (1863-1963) of the
Steuben Glass Works at Corning, New
York, developed the ancient cire perdue
(lost wax) process for the production of
Diatreta. In this process a wax model of
the object was made from a gelatin mould
taken from a plaster of Paris replica of the
object. The wax model was covered with a
ceramic mould. After a drying period of
twenty-four hours the mould was placed
over boiling water which melted the wax,
leaving the moulded impression in reverse
of the original model. Cold glass in the
form of rods or lumps was placed in the
mould, which was then fired in a kiln until
the glass had run into every part of the
mould. The mould and glass were next
slowly annealed, and finally the mould was
broken away, leaving a glass casting of the
original model. The Diatretum pieces
made between 1945 and 1959 show how
Carder had perfected this method of
glass-casting.
ENGRAVED BY Ј. JANE WEBSTER
England, 1963
One of the more successful modern free-
lance wheel-engravers of Britain is Jane
Webster, a former student of Stourbridge
College and Royal College, where she
gained the Princess of Wales scholarship.
Her chief concern, as it also is with her
contemporaries Laurence Whistler and
David Peace, is the satisfactory relation-
ship between the design on one side of the
glass and the part that shows through from
the other. Her husband, Cyril P. Aron,
designed her copper wheel-engraving
lathe. She specialises in commemorative
presentation pieces such as the one pre-
sented to Princess Anne on the occasion of
her visit to Pilkington Brothers’ St. Asaph
factory in Wales in 1972. She has also
engraved a set of twelve windows in a
synagogue at Stanmore, and an overdoor
panel for the Edinburgh Weavers’ show-
room in London. The chalice and paten
illustrated were commissioned by the
architect, Harry M. Fairhurst to be pre-
sented by the academic staff for the chapel
of the St. Anselm University Hall of
Residence at Manchester.

Art Deco British Furniture: ART DECO TUB CHAIR, NEST OF TABLES, CHEST OF DRAWERS, BURR MAPLE TABLE, OAK BOOKCASES

DURING THE FIRST HALF of the 1920s,
most British furniture designers remained loyal to the principles of the Arts and Crafts Movement (see p.330), but occasionally used decorative elements inspired by French Art Deco in their work. One of London’s most successful retailers and manufacturers, Heal & Son, produced Arts and Crafts designs made from sycamore, oak, or limed oak, quietly embellished with some Art Deco features. The furniture was essentially machine-made but was finished by hand.
RESTRAINED STYLE
Gordon Russell’s furniture designs of the 1920s exhibited the more traditional Art Deco style. He adopted motifs, such as sunbursts and chevrons, and used exotic materials such as ivory and
macassar ebony Exhibiting to great acclaim at the 1925 Exhibition in Paris, Russell rejected the opulence favoured by his French counterparts, and displayed a cabinet that celebrated the simplicity of traditional Georgian design with a minimum of decoration.
The 1925 Paris Exhibition influenced the Heal’s designer, J.E Johnson. From 1926 to 1927, he displayed a range of bedroom furniture made from macassar ebony and influenced by the high Parisian Art Deco style of Emile Jacques Ruhlmann (see p.393). In 1928 Waring & Gillow, who provided luxury furniture for ships and hotels,
displayed fine furniture in the high Art Deco style in an exhibition called “Modern Art in French and English Furniture and Decoration”. The
exhibition marked the launch of their Department of Modern Art, which was headed by the Russian emigre Serge Ivan Chermayeff. Although Chermayeff favoured the use of opulent veneers, he soon moved away from the French Art Deco style towards a more Modernist aesthetic. His sofas and coffee tables were geometric in form and the upholstery and carpets featured geometric patterns. His designs were widely copied, using less expensive materials, and were mass produced for the middle class home.
A TASTE FOR LUXURY
Fashionable Art Deco furniture made of sumptuous, expensive materials. and echoing traditional shapes – albeit with a Modernist twist – was also created in Britain by Betty Joel and Sir Edward Maufe. Sir Edward Maufe had won a medal at the 1925 Paris Exhibition for his mahogany camphor wood, and ebony writing desk, which was gessoed and gilded with hire gold, and featured silk tasselled handles. Betty Joel’s prestigious and exclusive clientele included the King and Queen and Louis Mountbatten.
By the 1930s, Gordon Russell was producing more Modernist pieces, developing a successful range of good quality, mass-produced furniture that made use of new materials such as tubular steel. Sir Ambrose Heal was also firmly aligned with the Modernist movement. However, elements of Art Deco persisted in Britain. The sunburst motif and stepped tiling could be seen in many suburban houses, and household objects, such as radios, telephones, and vacuum cleaners, exhibited the streamlined style of American Art Deco. In 1933, Maurice Adams produced the archetypal streamlined cocktail cabinet in ebonized mahogany with metal casing and chromium mounts.
The lobby of the former Daily Express building in Fleet Street, London The lobby was designed in 1932 by Robert Atkinson and was inspired by Hollywood film sets. It features a starburst
ceiling with a silvered pendant lamp and a huge silver and gilt plaster relief panel along one side.

OAK BOOKCASES
This pair of Betty Joel bookcases is made from Australian silky oak. Each bookcase is asymmetrical, with random open and enclosed shelves and two cupboard doors. The circular door handles contrast with the rectangular and
square shapes of the cupboards and shelves. The bookcases stand on fluted square feet. Each one bears the following label on the base: “Token Hand-Made Furniture by Betty Joel, made by J. Emery at Token Works Portsmouth.” 1932.
BURR MAPLE TABLE
DINING CHAIR
MIRROR
This Art Deco mirror, by Whytock and Reid of Edinburgh, has a shaped, rectangular red-lacquered frame. The stylized plant motifs in the crested moulding are highlighted in gilt.

CHEST OF DRAWERS
This English chest of drawers, made from walnut, has black-lacquer banding around the drawers and the edges of the case which accentuate Its rectilinearity. The distinctive, slender drawer handles are attached vertically in juxtaposition to the horizontal, rectangular drawers. c.1930
NEST OF TABLES
These three tables are made from amboyna and satinwood with a decorative inlay. Each table top has a geometric sunburst design, made from contrasting woods, and a moulded edge. The tables are supported on tapering splayed legs and have moulded pad feet. c.1925.
TUB CHAIR
This squat, geometric tub chair, one of a pair, has a U-shaped framework with a curved back and arms that are veneered in oak from top to bottom. The back and apron of the chair, and the loose cushion seat, are upholstered in a striped fabric. The other chair of the pair has a slightly taller back.

MACASSAR SIDEBOARD
Heal & Son designed this Art Deco, ebony-veneered macassar sideboard. Its unusual appeal arises from the panels of green shagreen on the surface of the sideboard combined with an ogee-moulded ebony edge. The sides and front of the sideboard are veneered in boldly figured timber with a geometric border at
the top and base of ebony with ivory lines. The fluted, turned legs terminate in ivory feet, and the square door and drawer handles are also made of ivory. The overall shape of the sideboard is reminiscent of an 18th-century commode. c.1930.
The fluted, turned legs terminate in ivory feet.
Geometric borders of ebony and ivory line the top and bottom of the sideboard.
The sideboard echoes the shape of an 18th-century French commode.
Square, tapering ivory handles contrast with the boldly figured veneer.

Coloured glass
Coloured glass is made by adding metallic oxides to the glass batch. This technique was widely practised in ancient Egypt and Rome, where brightly coloured glass was often favoured over clear glass. In the 15th century opaque white glass, slightly translucent glass, and glass in imitation of hardstones were produced in Venice; in Bohemia glass in bold colours of blue and
ruby-red was widely produced before 1800. In the 19th century, with advanced technical and mass production methods production was much more widespread with notable firm operating not only in Italy and Bohemia but also in Britain France, and the USA. Experimention with new staining any overlay techniques produced a wide array of coloured designs.
EARLY GLASS
The Egyptians experimented with coloured glass, exploiting their extensive trade routes to acquire the necessary materials. Ancient Egyptian glass comes in a myriad of bright, pure colours. One of the most common was bright turquoise blue, coloured by adding copper oxide to the batch. Antimony and tin oxide, imported from Assyria, were used to colour glass an opaque white, while pure opaque yellow was trailed over dark blue core-formed objects, with white or pale blue, and
combed into festoons or feathery patterns and zigzags. Fine alabastra (bottles or flasks) known as “gold-band” incorporate stripes of real gold.
The Romans continued to experiment with coloured glass, producing most famously dark blue glass overlaid with opaque white and cut with cameo decoration. Mosaic glass was made from brilliantly coloured canes of glass cut into tiny slices and fused together in a mould. Most coloured glass was blue, although purple and amber pieces are also found. Much excavated Roman glass will have an iridescent surface; this is the result of a chemical reaction with the metal oxides in the earth after the glass was buried. Roman wares include bowls, bottles, flasks, and cups.
VENETIAN GLASS
From the mid-15th century the sophisticated know-how of Venetian glassmakers gave rise to many different types and effective combinations of coloured glass. In the late 15th century a “milky” opaque-white glass made by adding tin oxide to the batch was developed. This glass (known as lattimo in Italy) resembled porcelain, and it became particularly popular in the late 17th and early 18th centuries, when imported Chinese porcelain was in vogue. From the late 15th century a fine marbled glass known as “chalcedony” ” or “agate” glass was created by mixing together coloured opaque metals to resemble hardstones. Opaline glass, which was slightly translucent and less dense than opaque-white glass, was probably first made in Venice in the 17th century by the addition of oxides and the ashes of calcified
bones to the batch; when held to the light it can be distinguished from opaque-white glass by a red or yellow tint, which is known as the “fire’
BOHEMIAN GLASS
In the 16th century a distinctive dark-blue glass was produced in Bohemia by the addition of cobalt oxide. The clear vivid body colour was a perfect canvas for the brightly coloured naive enamelling popular at that time. At the end of the 17th century a deep pink glass was invented by by Johann Kunckel (c.1630-1703), a chemist and director at the Potsdam Glasshouse (est. 1679). The colour was produced by adding gold chloride to the batch. This “gold-ruby” glass (known as “Kunckel red” or, in German, Rubinglas or Goldrubinglas) was also produced in Nuremberg and other glasshouses in southern Germany. Gold-ruby glass was decorated with engraving, cutting, or gilding, and was considered a luxury product.
• MAIN AREAS OF PRODUCTION ancient coloured glass was made in Egypt and Rome; it was produced from c.1450 in Venice and from the 16th century in Bohemia
• TYPES blue glass; porcelain-like “milk” glass; coloured glass in imitation of hardstones; opaline glass; gold-
ruby glass
• FORMS densely coloured pieces may appear heavy bodied
• COLOURS ancient glass: many pieces have dark blue bodies sometimes with yellow and white decoration
• COLLECTING ancient Egyptian glass is very rare and valuable; generally colour will not play an important part in its value; gold-ruby glass is rare and valuable
Bohemia
The 19th century was an age of experimentation in glass technology. Glassmakers, some of whom were also skilled chemists, developed new colours, new ways of applying colour, and innovative techniques to produce glass
The most celebrated types of Bohemian glass from this period are “Lithyalin”, “Hyalith”, stained, and flashed glass.
LITHYALIN AND HYALITH GLASS
Count Georg Franz August Langueval von Buquoy 1811-1851), the owner of a number of glasshouses in southern Bohemia, produced an opaque black glass c.1817, which was inspired by the black basalt wares produced from the end of the 18th century at the Wedgwood factory (est. 1769) in England. In 1819 lie produced another dense opaque glass, known as -Hyalith”, usually in sealing-wax
red or jet-black. Hyalith was usually decorated with gilding.
Von Buquoy’s experiments may have inspired Friedrich Egermann (1777-1864), who in 1829 at his factory in Haida, northern Bohemia, patented “Lithyalin” glass, a polished opaque glass that resembled hardstones, which he continued to produce until 1840. The surface of the glass was brushed with metal oxides to resemble veining and marbling. Strong colours are typical, especially red; more unusual are dark-green, blue, and purple. Wares were usually cut and polished and occasionally gilded or enamelled. Lithyalin glass was used mainly
~, vases,
for purely decorative items, notabl
and scent bottles. Lithyalin glass was also produced at the Harrach Glassworks (est. 1`14) in Neuwelt (now Novy Svet in the Czech Republic), and by Hautin & Co. in France. Although these copies are difficult to distinguish from pieces by Egermann, they are usually slightly lighter in colour.
STAINED, FLASHED, AND OVERLAY GLASS Egermann also invented an effective and inexpensive method of colouring glass with a
thin stain of colour, which was called flashing. This involved painting a clear object with a stain and firing it at a low temperature to fix the colour. This gave a solid, even, pale colour. Egermann is particularly noted for his yellow coloured stain, developed in 1818 using silver chloride, and his ruby-red stain, perfected in 1832, using gold
chloride and copper oxide. Wares were often cut through to the thin colour to reveal the clear glass beneath.
In casing – a technique reinvented by Egermann –the glass vessel is covered in a differently coloured glass and then fired; as the glass cools, the two layers fuse together. Some pieces were “double-cased”, i.e. dipped into two differently coloured batches of glass to give a multicoloured effect. The flashing technique is sometimes confused with casing as the terms were used interchangeably by some glassworks; however, in casing the layers of glass are much thicker. If there is a sharp line between the two colours, this suggests flashing, whereas shading or thinning between two colours suggests overlay. Flashing and staining are characteristic of 19th-century Bohemian glassmakers as they are inexpensive methods of colouring glass and thus well suited to the mass-produced wares made during the 19th century.
OTHER COLOURED GLASS
During the 1820s and 1830s a series of
industrial exhibitions held in Prague gave rise to the development of other types of coloured glass, including violet, pink, green, and blue. Further experimentation with colour in the early
I 9th century sparked the discovery in Bohemia of other ways to colour glass. Of particular note is the work of Josef Riedel (active 1830-48), who in the 1830s used uranium to produce a vivid fluorescent greenish-yellow (Annagriin) and yellowish-green (Annagelb) glass, both named after his wife Anna. However, this glass was mildly radioactive, and the process was later abandoned.
Lithyalin and Hyalith glass
• CONDITION ceramic restoration techniques are often used, so repairs can be difficult to spot
• COLLECTING display vessels such as vases and bowls arc most common; display cups and saucers and pieces with gilt oriental and chinoiserie decoration are rarer; lithyalin overlaid on dark-green hyalith is valuable
Flashed, stained, and overlay glass
• CONDITION check pieces carefully, as damage is often hard to detect on coloured glass; good condition is vital
• COLLECTING the condition and depth of the colour determine the value; beware when collecting blue stained glass as it fades easily and can lose value
Other Bohemian coloured glassTYPES
• vivid green Annagriin and Annagelb glass
Britain, France, and the United States after 1800
Coloured glass was widely produced during the 19th century in Britain, France, and the USA. In Britain two important events gave a new impetus to the manufacture of coloured glass in the middle of the century. The first was the removal of excise tax on glass in 1845, which encouraged makers to experiment with new techniques and styles, among them coloured glass. The second was the Great Exhibition held in London in 1851 at which glassmakers from Europe and the USA were keen to show their new skills and techniques. In France glassmakers at all the major factories manufactured coloured glass in a range of styles and forms, and in the USA firms experimented widely with colour, producing an extensive range of designs, most characteristically in delicate pastel shades with subtle
BRITAIN
All blue, green, and amethyst glass produced in Britain from the end of the 18th to the middle of the 19th century is generically described as “Bristol” glass. The most characteristic colour is a brilliant royal blue, produced by adding cobalt oxide to the batch; such glass is frequently embellished with cold gilding. Drinking glasses were generally green, ranging from grass green to a turquoise green. Amethyst glasses are rare, but when found the colour is true and clear, with no sign of red, unlike the plum tone found on later Victorian glass.
In the mid-19th century the influence of coloured glass manufactured by well-established glass companies in Bohemia became increasingly visible in the products of British factories. Not only did important Bohemian factories such as the Harrach Glassworks (est. 1714) in Neuwelt (now Novy Svet in the Czech Republic) exhibit quantities of coloured glass at the Great Exhibition, but Bohemian glassworkers were also employed by British factories where, freed from the constraint of having to produce wares in traditional styles, they were able to manufacture very exciting wares in an outstanding range of new colours.
In the late I 870s a type of
type
opalescent glass, known as
“Vaseline” glass due to its greasy,
vaseline-like appearance, was developed
in Britain and designed to resemble 15th-
and 16th-century Venetian glass. The opalescent colour was produced by using tiny amounts of uranium together with other metal oxides to create shades of yellow, green, blue, and, more rarely, red. Stevens & Williams Ltd (est. 1847), of Brierley Hill, near Stourbridge, was one of the leading innovators in the field of patent colours and colour combinations in the late 19th and early 20th centuries. The company’s rare double-cased “Rockingham” ware is particularly sought after, as are the Bohemian-style
pieces with alternating panels of engraved colour-flashed and clear glass produced by WIT.,
B. & J. Richardson (est. c.1836), also near Stourbridge. Amber was the most commonly used colour for the vases, decanters, and claret jugs in this style, although some pieces were also produced in purple, green, and red.
Gold and uranium oxides combined with sodium nitrate were used to manufacture the “Queen’s Burmese” range of glass by Thomas Webb & Sons (est. 1837), near Stourbridge, patented in 1886. Queen’s Burmese was inspired by the “Burmese” glassware patented in 1885
by the Mount Washington Glass Co. (est. 1837), in South Boston, Massachusetts, and favoured by Queen Victoria who ordered a set – hence the name. It had a body colour that shaded from a pale lemon-yellow (sometimes light green) at the bottom through to salmon-pink at the top. Some pieces feature enamelled and gilded designs. Although Queen’s Burmese ware was made by other British companies – including WIL, B. & J. Richardson –pieces by Webb are the most desirable. Typical wares include vases, posy bowls, and lampshades. Another type of glass introduced by Webb was “Peach” glass, a type of cased glass that shaded from pink through to a deep red.
A Tazza
The tazza is a distinctive Venetian form of serving dish. The revival of 15th- and 16th-century Venetian glass forms and styles of decoration was started in Venice during the mid-19th century and gradually spread throughout Europe. In Britain the Revival was supported by William Morris, who disapproved of the heavily cut glass prevalent at the time. One of the leading British manufacturers of Venetian Revival glass was James Powell & Sons (est. 1834), which produced “Vaseline” glass wares similar to the example shown above, and in delicately tinted glass from the 1870s.
FRANCE
In France, the Baccarat Glassworks (est. 1764 as the Sainte-Anne Glassworks) in Baccarat, near Luneville, Lorraine, produced glass c.1880 in a distinctive, delicate shade of pink known as “tinted-rose”.Many
wares feature acid-etched Classical decoration. Another fashionable trend was the production of coloured opaline glass, a semi-opaque white glass, opacified by the addition of the ash of calcined bones and coloured with metallic oxides. The Venetians had been the first to introduce this translucent glass, which was later made in Bohemia and Britain, but the French opaline glass first produced c.1823 at Baccarat was more translucent. The finest French opaline was made at Baccarat, at the Saint-Louis Glassworks est. 1767) near Bitche, in the Munzthal, Lorraine, and at the Choisy-le-Roi Glassworks (est. 1821) in Paris. Wares were made in delicate pastel shades such
as turquoise, pink, and pale green, and include pairs Of vases with enamelled decoration, and vases, jugs, and dishes of inventive forms, often with coloured cane rims. Saint-Louis Glassworks made many pieces IT soft pink or blue, with latticinio decoration and glass cane rims.
THE UNITED STATES
Throughout the 19th century American glass manufacturers launched and developed a range of innovative coloured glass. One of the most popular and now widely collected colours is the transparent “Cranberry” glass, which has a distinctive raspberry pink tint, first produced in the glassmaking region of Stourbridge in England. Huge quantities of useful and ornamental wares were made, most notably at the Boston & Sandwich Glass Co. (1826-88) in Sandwich, Massachusetts.
However, it was only during the 1880s, when there was a move away from cut and pressed glass by the leading glass manufacturers, that they began to experiment in earnest with a more sophisticated range of coloured art glass. One of the leading companies at this time was the Mount Washington
Glass Co., which launched the widely copied and enormously popular “Burmese” glass in 1885. Most Burmese glass has a satin finish, although some has a glossy surface, and is characterized by subtle gradations of shading from a light lemon at the bottom of the piece to a delicate pink at the top. In 1883 the firm of Hobbs, Brockunier & Co. (est. 1863) in Wheeling, West Virginia, developed “Peachblow” glass and incorporated it into its range of coloured wares. This cased glass is a warm buttery yellow at the base shading through to a purplish-red at the top and is lined in a white opal glass. Peachblow was made at other companies, including the New England Glass Co. (1818-90), originally in East Cambridge, Massachusetts, which called it “Wild Rose”. New England was also notable for its “Amberina” range of glass, which it produced as “Pressed Amberina”. Both Wild Rose and Pressed Amberina were developed by Joseph Locke (1846-1936), an English glassworker, who emigrated to the USA in 1882. Patented in 1883, Amberina glass contained small amounts of gold, and graduated from pale amber at the base through to a rich fuschia at the top. It was made until 1900. Hobbs, Brockunier & Co. also made Pressed Amberina under licence from the New England Glass Co.
France
• MAJOR FACTORIES Baccarat, Saint-Louis, Choisy-le-Roi
• TYPES pastel-coloured opaline glass and wares with decoration are most notable
• COLLECTING wares by Baccarat are sought after
Marks
Saint-Louis: this mark was used from 1870 to the present day; some pieces marked “Argental” or Munzthal the German for Argental, often with a tiny cross of Lorraine
The United States
• COLLECTING Cranberry glass: very popular with
collectors; later Cranberry tends to have a less warm hue and a bluey tinge when held to the light
Marks
Mount Washington Glass Co.: mark used on Burmese ware from the 1880s
New England Glass Co.: Amberina ware; mark used from 1880s
Britain
• TYPES Bristol glass, overlay glass, Vaseline glass, decorated opaque and opaline glass
• BEWARE there are many early 20th-century copies of Bristol glass: beware of glasses that are larger than usual (more than c. I Ocin/4in high) and thin glass
Marks
Thomas Webb & Son

Many major British designers used elements of the Art Deco style in their furniture, while remaining true to their Arts and Crafts roots and making little use of lavish ornament or exotic woods. Art Deco furniture was more typically produced by minor makers, whose work included copies of popular pieces shown at the 1928 Exhibition of Modern Art in Decoration and Furnishing. Held in London, the exhibition introduced decorative, continental Art Deco furniture into Britain. The Modernist influence of the 1930s is seen in the mass-produced furniture by Isokon (1932-9).
TRADITIONALISTS
The designers of the Cotswold School concentrated on the Arts and Crafts tenets of truth to materials, form derived from function, and traditional construction techniques. Native woods such as oak and walnut were favoured, and decoration was minimal. Luxury furniture was made by, among others, Sidney Barnsley (1865-1926), Peter Waals, and Robert Thompson (d.1955), the Houseman”, who used a carved mouse as his signature. Gordon Russell (1892-1980) made the most successful transition to both traditionalist and Modernist styles of Art Deco. While using traditional construction techniques, he incorporated such exotic materials as Macassar ebony and ivory into some pieces, together with Art Deco motifs like sunbursts and chevrons. His belief in the need for good-quality, mass-produced furniture led him to develop a range of furniture that used tubular steel and other synthetic materials, with machine-made parts.
Heal & Son (est. 1800), in London, maintained its role as a major manufacturer and retailer. Oak, especially limed oak, was most commonly used for a range of traditional Arts and Crafts designs with some Art Deco features. Again, decoration was minimal, and although contemporary construction techniques such as screw-fixing were used, pieces were hand-finished.

MODERNISTS
In 1934-5 Finmar Ltd was
set up in Britain to distribute Alvar
Aalto’s moulded plywood furniture. The plain, simple pieces had clean contours, decorated with blocks of colour; solid wood was often combined with laminates. The firm of Isokon (Isometric Unit Construction), founded in London by the architect Jack Pritchard (b.1899), produced a range of simple furniture, generally more adventurous than that distributed by Finmar. Designers associated with the company include Marcel Breuer (1902-81). Typical of the period are its lightweight stacking “cutout” tables and chairs made from a single sheet of cut and moulded plywood.
More exclusive Modernist Art Deco furniture was designed by Betty Joel (1896-1984), who used curving shapes, minimal decoration – wood grain or contrasting veneers – and native woods such as sycamore; from the 1930s she also used chromed steel and plywood laminates. One of the few truly innovative British Art Deco designers was Gerald Summers (1899-1967). In the 1930s he designed side-chairs and open armchairs, cut and shaped with curved backs and seats, in laminated birchwood. The Birmingham firm of PEL (Practical Equipment Ltd, est. 1931) commissioned collectable steel-frame furniture from such designers as Oliver Bernard (1881-1939) and Wells Coates (1895-1958).

•    MATERIALS light woods were popular – sycamore, limed oak, walnut, and burr-walnut
•    CONDITION plywood furniture must be in good condition: check laminated pieces for chips or flaking
•    COLLECTING one-off, commissioned pieces by well-known makers are very expensive; minor furniture is collectable if well designed and in good condition; pieces by members of Cotswold School most desirable; forms associated with Jazz Age most sought after
Marks
Heal & Son: work is stamped with this mark, inset in a circular ivory plaque on the insides of doors or inside drawers

After World War I, furniture designers combined luxury and practicality in their products, and created both traditional types of furniture and innovative forms. In France, traditional Art Deco furniture was typified by elegant styles looking back to the 18th or 19th centuries, using inlay and exotic woods. After 1925 French makers started to incorporate the “new” materials
that were part of the Modernist aesthetic, such as chromium, aluminium, and tubular steel — as advocated by the innovative German Bauhaus, whose industrial designers created functional furniture for mass production. In the USA, designers were influenced by both traditional and Modern European Art Deco, using materials such as laminated wood and chromed metal.

In the early 20th century, Dutch, German, and
Scandinavian furniture designers were at the forefront of the Modern movement. Designing specifically for Machine production, they rejected ornament and experimented with the new materials of tubular steel, aluminium, chromium, and preformed plywood, aiming to create standardized, functional furniture accessible to all markets.
THE NETHERLANDS
Among the earliest furniture designs inspired by the new machine aesthetic ere those of Gerrit Rietveld 1888-1964). From c.1918 Rietveld was associated with the Dutch magazine De Stijl (Style), whose contributors, a group of avant-garde architects, painters, designers, and theorists, aimed
to create a new “universal” art based on lines, geometric shapes, primary colours, and black and white. Rietveld’s “Red-Blue” chair, designed in 1918, is one of the best-known expressions of De Stijl ideas. Its straightforward construction meant that it was highly suitable for mass production. Versions made before 1923 are stained, varnished, or limed, reflecting Rietveld’s traditional training in carpentry. Only after this date was the chair painted in red, blue, black, and yellow. From c.1918 Rietveld’s furniture designs were constructed from linear wooden elements; from the mid-1920s they featured flat Wooden planes. Rietveld produced his own furniture until 1924, when he sold his business to his assistant Gerard van der Groenekan. Rights to the designs were sold in 1971 to the Italian furniture company Cassina, which still reproduces them today.
GERMANY
Most of the well-known furniture designers in Germany in the inter-war period were associated with the Bauhaus. Founded in 1919 in Weimar by the architect Walter Gropius (1883– 1969), the Bauhaus was one of the first schools to train artists and craftsmen to design high-quality goods specifically for industrial production. It is particularly renowned for the functional, geometric style of its products and its experimentation with new Materials such as tubular steel and plywood.
The best-known furniture designs associated with the Bauhaus were those produced by the Hungarian-born architect Marcel Breuer (1902-81), head of the school’s carpentry workshop from 1925 to 1928. His earliest designs feature linear wooden components, similar in
style to Rietveld’s furniture. However, by c.1925, Breuer was designing chairs with tubular steel frames, and his “Wassily” chair (1925) was one of the first tubular steel pieces to be produced on a large scale. Designs including the “Wassily” chair and the tubular steel-framed, cantilevered “B32″ chair (1926) were manufactured by such firms as Standard-Mobel Lengyel & Co. in Berlin and Thonet in Vienna. In 1932 Breuer began to design aluminium furniture for the Wohnbedarf furnishings stores in Switzerland; since aluminium is weaker than steel, these designs are more complex in construction than his tubular steel pieces. In 1935 Breuer emigrated to Britain, where he met Jack Pritchard (b. 1899), owner of Isokon (1932-9), which produced furniture in the Modern style and promoted the use of plywood. For Isokon, Breuer designed the “Long Chair”, a sculptural plywood reclining chair that moulded to the position of the body, and lightweight tables and chairs created from single sheets of cut and moulded plywood.
The avant-garde architect Ludwig Mies van der Rohe (1886-1969), artistic director of the Bauhaus from 1930 to 1933, designed cantilevered tubular steel furniture for mass production by the firm of Berliner Metallgewerbe
from 1927 to 1931. Many of his other designs, although functional in appearance, were in fact handmade for the luxury market. A notable example is his padded leather and chrome “Barcelona” chair and stool, designed for
the German pavilion at the 1929 International Exhibition in arcelona. With a curved X-frame inspired by Classical furniture, the chair was designed as a “throne” for King Alfonso XIII of Spain for the opening ceremony of the exhibition. Original Berliner Metallgewerbe models are exceptionally rare and valuable today, but since 1947-8 the chair has been mass-produced by the American firm of Knoll, and these reproductions are more accessible to collectors.
SCANDINAVIA
In the 1920s and 1930s, Scandinavia was less industrialized than the rest of Europe or the USA, and
its craft tradition was still highly evident in furniture and interior design. This tradition continued even with the advent of Modernism, Scandinavian designers preferring curving forms and wood to the angular shapes and tubular steel favoured by their German peers. This is well illustrated by the furniture designed by the Finnish architect Alvar Aalto (1898-1976), who from from 1929 experimented with plywood for such items as chairs and trolleys, and in 1933 patented a method of bending wood to make stacking stools. Like other Modernist furniture of the period, Aalto’s designs are simple in construction, with no surface decoration, although they may be painted in bright primary colours. His furniture was produced from 1930 to 1933 by the firm of Otto Korhonen in Turku and from 1935 by his own manufacturing company, Artek, in Helsinki. Aalto’s versatile furniture, especially his stacking stools, proved particularly popular in Britain, where it was imported and distributed by Finmar Ltd (est. 1934-5).

•    COLLECTING original 1920s and 1930s pieces are rarer and more valuable than recent versions; many designs were sold to large furniture companies from the 1940s and have been in continuous production since
Gerrit Rietveld
•    CONSTRUCTION linear elements were typical before the early 1920s; planar designs thereafter
•    COLOURS primary colours, plus black and white; early versions of “Red-Blue” chair are unpainted
Marcel Breuer
MATERIALS tubular steel, aluminium, or bent and
laminated plywood; leather arid cane for seats
•    CONSTRUCTION simple contours
construction; chairs and tables made after 1925 have runners rather than feet; Isokon side-chairs and tables are made from single sheets of cut plywood

Ludwig Mies van der Rohe
•    MATERIALS tubular steel combined with padded leather upholstery, raffia, or glass
•    CONSTRUCTION Some chairs are cantilevered; the “Barcelona” chair and stool have a distinctive X-frame; careful hand-finishing is typical
•    COLLECTING on early, handmade “Barcelona” chairs the top rail is in bent chromed steel with lap joints and chrome-headed bolts; on later, mass-produced pieces (after 1947-8) the top rail is of cut and welded stainless steel
Alvar Aalto
•    MATERIALS woods, especially plywood, bent laminated (which may flake), and solid birch
Marks
Some Finnish furniture is marked “Aalto Mobley, Svensk Kvalitet Sprodurt”; most pieces have an applied metal label bearing a model number

The Art Deco style of the 1920s and 1930x, which derived ‘its name from the 1925 Paris Exhibition – the Exposition des Arts Decoratifs et Industrials Modernes – was the first truly modern style of the 20th century. .In their subject-matter, style, and bright colours, Art Deco furniture, jewellery, ceramics, cs, posters, sculpture, and other decorative arts reflected the general atmosphere of optimism that prevailed after the devastation of World War I. The increased liberation of women, the rise of jazz music and Hollywood film-making, the preoccupation with speed, travel, and leisure pursuits, and the growth of commercial competition and advertising all had a strong Influence on Art Deco designers. Until the late 1970s Art Deco pieces attracted little interest among dealers and collectors, but since that time, with numerous exhibitions and Publications on the subject, the popularity  of collecting Art Deco has increased enormously.

Like the Paris Exhibition of 1900 –which had been the showcase for the Art Nouveau style – the 192-5 Exhibition aimed to promote France as the pre-eminent centre for the production of luxury goods. Most European countries, except for or Germany, were involved; the USA declined to take part, deciding that it could not meet the entry requirements for examples of work of “new and original inspiration” stipulated by the organizers. The exhibition was therefore dominated by pavilions displaying the work of leading French designers, such as the
furniture designer Jacques-Emile Ruhlmann (1879-1933) and the glassmaker Rene Laliquc ( 1860-1945). The design studios of the major Parisian department stores, such as Primavera at Printemps, La Maitrise at Galeries Lafayette,  and Pomona at Au Bon Marche, displayed complete interiors, with examples of furniture, household wares, textiles, and carpets in matching styles.
Most of the exhibits reflected the “official taste” of the exhibition; forms were adapted from historical or traditional styles, but with lavish ornament of stylized flowers, figures, and animals, and geometric patterns such as zigzags and chevrons. This was particularly evident in Ruhlmann’s Pavilion d’un Collectioneur, with its chairs influenced by 18th-century design, boldly  patterned wall coverings, and elaborate chandeliers, and also in the design by Andre Groult for an ambassadorial boudoir with shagreen-covered furniture.
This style contrasted strongly with the few displays by Modernist designers. The Pavilion de I’Esprit Nouveau was designed by the avant-garde Swiss-born architect Le Corbusier (1887-1965) and exemplified his vision of a new, minimalist architecture and lifestyle. His small two-storey house, with its doors, windows, and other structural elements based on a modular system of standard-sized units, contained mass-produced furniture and was decorated with abstract paintings. Although this style made a strong impact, its influence did not become widespread until the 19 30x, when it was represented at the 1937 Universal Exhibition in Paris and also at the 1939 World’s Fair in New York.

THE 1925 PARIS EXHIBITION
The Art Deco style, although mainly associated with the 1920s and 1930s, did not suddenly emerge fully formed in this period. Rich ornament, exotic materials, and emphasis on comfort – all features of the style – were already evident in the decorative arts, especially in French furniture, before and during World War I. However, the development of the Art Deco style is mainly associated with the 1925 exhibition in Paris, which lasted from April to October. This exhibition was originally planned for 1915, Lis a continuation of the French government-sponsored international exhibitions that were held in Paris from the 19th century, but was postponed because of the war.
MOTIFS, INFLUENCES, AND
NEW MATERIALS
The standard motifs of the Art Deco style included such traditional decorative elements as bouquets of flowers, animals, and figures of young maidens. However, these were always stylized and angular rather than naturalistic and were often combined with purely geometric motifs, including chevrons, zigzags, Sunbursts, and lightning bolts. This emphasis on stylization and abstract and repeated forms was influenced by the growing impact of the machine, especially automobiles, trains, and aeroplanes, and by such abstract art movements of the early 20th century as Cubism and Futurism. The taste for bright colours was also inspired by the vibrant Fauvist paintings of Henri Matisse, Andre Derain and Maurice Vlaminck, which used contrasting tones and non-naturalistic colours.
Such movements were in turn influenced by the stylized, abstract forms of African masks and sculpture, which were widely collected and imported into Europe in large quantities at this time. Certain elements of Art Deco decorative arts, such as ceramic wall masks, show the inspiration of African art, while African figures featured as decoration on the ceramics of such potters as Rene Buthaud (1886-1987). Also around this time, black American culture in the form of jazz music was introduced into Europe from the USA; the jazz-inspired Revue Negre in Paris, featuring the black dancer and actress Josephine Baker, influenced the work of Buthaud and other Art Deco designers.
The taste for Oriental art was encouraged between 1911 and 1920 by the exotic stage and costume designs of Leon Bakst ( 1866-1924) for the Ballets Russes. These had a significant influence on the Art Deco style, and sparked a fashion for Oriental black-and-red colour combinations as well as lacquered furniture, metalwork, and objets d’art. One of the best exponents of the style was the Swiss designer Jean Dunand (1877-1942). Leading sculptors in France, such as Dimitri Chiparus 1880-1950), also produced figures of dancers in exotic costumes.

THE MODERN MOVEMENT
An alternative to the luxury Art Deco style developed mainly outside France, especially in Germany, during and after World War 1. Progressive artists, architects, and designers argued that the new era demanded good-quality, functional design for all; that new technology and machine production should be exploited fully;  and that form must be derived from function, Without unnecessary ornament.
This movement began in 1907 with the Deutscher Werkbund, an alliance of designers and industrialists. In 1919 the Bauhaus was founded in Weimar by the German architect and designer Walter Gropius (1883-1969); in 1925 the school moved to Dessau, and it was closed by the Nazis in 1933. Bauhaus members designed high-quality furniture, lighting, metalwork, and textiles for industrial production, using new materials, including plywood and tubular steel. Many designs, such as the tubular steel furniture by Marcel Breuer (1902-81) and the glass and metal lamps by Marianne Brandt (1893-1983), are still widely produced. Other Modernist designers of the period included Le Corbusier in France, Alvar Aalto (1898-1976) in Finland, and Gerrit Rietveld (1888-1964) in the Netherlands.
Both the decorative and the Modern strands of Art Deco had a strong influence in the USA, where the style’s vibrant colours and rhythmic patterns expressed the optimism of a young
country that was also the world leader in the mass production of consumer goods. Designers including Paul T. Frankl ( 1886-19,58) and Donald Deskey (1894-1989) used materials also favoured by European Modernists, such as chrome-plated tubular steel. In the 1930s designers such as Norman Bel Geddes (18931958) and Walter Derwin Teague (1883-1960) began to develop their own distinctive version of Art Deco, known as “streamlining”.

Art Deco designers used an extremely wide range of  materials. Luxury manufacturers, including Jacques-Emile Ruhlmann, Paul Follot (1877-1941), and the cabinet-makers Louis Sue (1875-1968) and Andre Mare (1887-1932), specialized in fine-quality pieces veneered in exotic woods such as amboyna and Macassar ebony, combined with ivory, shagreen, enamel, gold and silver leaf, and lacquer. Modernist and industrial designers, especially in the USA, showed greater interest in new materials such as aluminium, chromium, and tubular steel. Lavish cinema interiors were created relatively inexpensively from combinations of chromium, coloured glass, and painted concrete. Bakelite, a type of cheap, easily moulded plastic patented in 1907, was widely employed as a substitute for wood in such mass-produced items as radios.