Posts Tagged ‘FIGURES’

PITCHER IN ‘AGATA’ GLASS
New England Glass Company, U.S.A., after 1885.
Ht. 101 mm (7-5 in.)
‘Agata’: Joseph Locke secured the patent
for the making of ‘Agata’ glass shortly
after 1885. According to his patent, it was
made in the following way. The object to
DC decorated was first partially or wholly
coated with a metallic stain of the desired
colour. The part that was stained was
spattered, or had applied to it a volatile
liquid such as benzene, alcohol or naphtha.
When the volatile liquid evaporated, it
left a mottled surface on the glass, which
was fixed to it by firing in a muffle kiln.
The result was an all-over pattern sug-
gestive of a fanciful golden spider-web on
the glass. Sometimes so-called ‘oil spots’
of a blackish-blue colour appear within
the pattern. This type of decoration is
more usually found on glossy pieces than
on matt-finished ones. The New England
(ilass Company, Mass., produced Agata
glass, mostly confined to decorating their
Wild Rose Peach Blow ware.
VASE IN “SECOND GRIND’ POMONA GLASS WITH
BLUEBERRY DECORATION
New England Glass Company, U.S.A., 1886 r .
III. 121 mm (475 in.)
‘Pomona’ glass was yet another invention
of Joseph Locke’s for the New England
Glass Company. His first patent, issued
in 1885, referred to what is now called
‘first grind’ Pomona, and involved cover-
ing the glass with an acid-resistant coating
carved with thousands of minutely en-
graved lines in the parts where a frosted
appearance was required. When the piece-
was plunged into acid, this cut into the
lines, producing the frosted effect once
the acid-resist was removed. Locke-
achieved a cheaper alternative in his
second patent of 1886, now called ’second
grind’ Pomona. To produce a stippled or
frosted ground, the area required was
covered with a thin layer of some finely
pulverised acid-resisting powder; this
adhered to a thin layer of oil or varnish.
All parts of the vessel protected by these
fine particles were not affected by the acid
bath, which produced a fine stippling
over the body of the article. Pomona
glassware was decorated with amber, blue
and rose-coloured stains.
‘Royal Flemish’: The patent for ‘Royal
Flemish’ glassware was issued to Albert
Stcftin in 1894. Raised gold-enamelled
lines divided the glass article into sections,
which were later coloured to give an
appearance rather like a stained glass
window. The different segments were
painted in transparent enamels in con-
trasting colours, usually brown, beige and
gold. The background of this glass is acid-
finished to give a matt appearance. Royal
Flemish glassware was manufactured by
the Mt. Washington Glass Company,
New Bedford, Mass., about 1890, several
years before the patent was registered. It
is noted for its painted enamels with the
designs in high relief, the old Roman
motif medallions often being used, as in
the jar illustrated. Designs include winged
creatures, cherubs and ‘guba-ducks’.
Sometimes Royal Flemish is marked with
‘RF’, the initial ‘R’ being reversed to the
initial ‘F’, and enclosed in a four-sided
diamond, orange-red in colour.
‘Feloton’ glass was patented in 1880 by
Wilhelm Kralik of Newclt, in Bohemia.
According to his specifications a gather of
glass would be dipped or immersed —
cither before or after it was worked into
shape— into a container that held filaments
or threads of coloured glass, this being
continued until sufficiently adhered to the
metal. He stated that these filaments could
be thrown on to the hot paraison, or the
paraison could be rolled on a surface where
the filaments lay, in order to catch them
up. The article would be reheated at the
glory-hole until the filaments became
homogeneous with the original body of the
glass, and it would then be pressed or hand-
tooled to the desired shape. Clear, coloured
and opaque white backgrounds were used.
Sometimes the finished article would be
given an acid bath for a satin finish.
Occasionally, heavy enamelled surface
decoration was added to give a more ‘busy’
effect.
‘Onyx’ glass was produced by the Dalzcll,
Gilmore, Leighton Company, Findlay,
Ohio, from about 1880; it was in this year
that George W. Leighton of Findlay
secured the patent for the firm. Prom the
Specifications il is apparent that “onyx’
glass was made from a sensitive mix con-
taining metallic constituents capable of
producing silver, ruby and other lustres.
The colours were made In subjecting the
glass to heat and gaseous fumes. Lustre
colours applied to the patterns are usually
in contrast to the main bod) ol the piece.
A moulding process was used that involved
two moulds, one lor pattern, one for
ultimate size and shape. Owing to the
difficulty of the technique, il is rare for any
two similar-shaped pieces to be of ihe
same shade. Rough rims arc quite com-
monplace in onyx glassware, since fire-
polishing these extremities could have
caused the sensitive material to change
colour; the rims were therefore cut and
ground to a tolerable smoothness.
K. Varnish, London. England, about 1850
I II 134 mm (o in.)
Silvered Glass: li was not until F. Hale
Thomson’s patent for silvered glass that a
satisfactory and reasonably economic
method of producing it was successfully
introduced. The British patent for the
production of this glass in quantity was
taken out in December, 1841) by Hale
Thomson and Edward Varnish, the piece
illustrated being made by E. Varnish of
I .ondon in about 1850. The goblet consists
of two layers ol glass, with silver mercury
applied to the back of the glass. The silver
has not discoloured, since goblets made b)
Varnish were permanently sealed. In
addition to a clear outer layer of glass, a
coloured transparent outer casing was also
used; this was carved through, to reveal
the silver-reflecting inner layer. Silvered
glass was made in various parts of Europe,
but Varnish was undoubtedly the best
exponent of the technique. Varnish, Hale
Thomson and others used a stamped
metallic disc J-inch in diameter, embedded
underfoot to mark the factory name on the
piece.
Glass with silver decoration was popular
from the last quarter of the 19th century
to just after the First World War. Several
means of depositing silver and other metals
on glass were patented in the last half of
the 19th century, the most notable being
those of Oscar Pierre Krard, a Frenchman
residing in England, and John H. Scharl-
ing of the U.S.A. Erard produced such
exceptional items as the jug illustrated lor
Stevens & Williams of Brierley Hill,
England. In 1889 he and John Benjamin
Round patented their method for electro-
depositing gold, silver, copper and other
metallic designs on glass, porcelain and
earthenware. They prepared a special flux
containing silver, which was formed into
a wash by being mixed with turpentine.
The design was painted on the glass in this
wash and was then fired in a kiln. The
article was placed in a solution of the
particular metal required, and an electric
current caused this to be deposited on the
glass.
Iridescent Glass: From 1863, when Ludwig
Lobmeyer exhibited the first iridescent
glass to be commercially produced in the
19th century, numerous patents were filed
for methods of making this attractive
glassware. The object was to imitate the
iridescence found on ancient pieces of
glass as a result of burial. In 1877 Thomas
Wilkes Webb of Stourbridge, England
was issued with a patent. The secret of his
method lay in the use of a closed muffle
furnace, where the fumes from the evapor-
ation of tin and other metallic salts were
allowed to come into contact with the
surface of the glass vessel. The hot surface
of the glass has an affinity to the acids being
used, thus causing them to remain perm-
anently attached to the glass. The result is
a rainbow-hued, mirror-like appearance.
In 1878 the patent was amplified to include
a fine crackled effect, in conjunction with
iridescence on the surface of the glass.
Patents for iridescent glassware continued
to be registered until the 1800’s, then for
a short time this ware was made only
sporadically. After 1000 the technique
took on a new lease of life both in the
U.S.A. and on the Continent. The best-
known makers of iridescent glassware in
the U.S.A. in the early 20th century were
Tiffany Furnaces, the Quezal Art Glass &
Decorating Company, the Durand Art
Glass Company, the Union Glass Works,
and the Steuben Glass Works. The last-
named produced iridescent glassware
under the trade name ‘Aurene’, which was
granted to Frederick Carder, Samuel
llawkes and W. II. Hawkes of the firm in
Corning, New York, in 1004. Fred Car-
der’s ‘Aurene’ and ‘Verre de Soie’ glass
ranks very highly. He introduced the
technique of spraying the heated glass in
a muffle kiln with a solution of tin crystals
dissolved in distilled water, which attacked
the surface, causing a shining, iridescent
effect.
‘Verre de Soie’, which translated means
literally ‘glass of silk’, shows the iridescent
finish just described. As in the case of the
example illustrated, practically all the
ware is of a soft grey-white appearance.
Occasionally, a very pale green colour is
added in the manufacture. Frederick
Carder, who had been co-founder of the
Steuben works in 1903, looked after most
aspects of the firm’s glass-making until
igi8, when the plant was sold to the
Corning Glass Works. 1 le continued as art
director until 1034, producing a massive
range of new art glassware. Besides the
glasses mentioned, he was responsible for
such specialities as Jade glass, Cluthra
glass, Cintra glass, Acid Cutback, lvrene,
Calcite glass, Intarsia glass, Bubbly glass,
Paperweight glass. Moss Agate glass,
Millcfiori glass, Rouge Flambe glass, and
others.
Louis Comfort Tiffany (1848-1934) de-
veloped many unique forms of art glass,
including iridescent ware. With Arthur J.
Nash and his sons A. Douglas and Leslie
Nash, he set up a factory at Corona, Long
Island, New York. Between the years 1894
and 1920 Tiffany’s registered several trade
marks. Leslie Nash, an accomplished glass
technologist, was granted a partnership in
the Tiffany In maces for his creation of the
‘Peacock’ Iridescent Glassware, which
made Tiffany’s world-famous. It should
be noted that it was also he who developed
‘Cypriote’ glassware for Mr. Tiffany. This
glass, an example of which is shown here,
was an imitation of the pearly and pimpled
effect one sometimes finds on the surface
of ancient pieces of glass that have been
buried for a long period. Tans and blues
are used most frequently as colours for
‘Cypriote’, and the surface looks as if it
were constructed of groups of minute
burst bubbles, the size of pinheads.
Tiffany Furnaces made single-colour iri-
descent glassware in which the surface is
broken up into thousands of fractures that
split ordinary daylight into rainbow col-
ours. They also decorated their iridescent
glass with trails from marvered-in coloured
fibres of glass. The quality of the wares
was enhanced by shapes to complement
the decoration; these include flower forms
such as bulbous tulips, or lily tops on long
stems and wide bases. ‘Lava’ glass is
usually found in deep blue and iridescent
gold glass, as in the example shown. A
splotchy iridescent gold is also found
amongst the deep blue. Tiffany became
famous for many other forms of art glass,
particularly for his Paperweight glass,
Agate, Marbleised ware, Cameo Glass,
Intaglio, Millefiori and Diatreta ware.
Other Tiffany products, apart from vessel
glass, were stained glass windows, mosaics,
enamels, jewellery with iridescent glass
and lamps with shades of floral or insect
design.
VASE IN IRIDESCENT GLASS
J. Ltttz Witwe, Austria, aboui iuoo
in pair de verre
Henri Cros, France, late ii|ih centur) ‘early aoth
». en tun
Some excellent iridescent glassware was
made, during its revived popularity, by the
Austrian firm of Ldtz (Loetz of Austria),
also known as L6tZ Witwe of Klastcrsky
\ll\n. The shapes and surface iridescence
show great similarity to some of the best
American iridescent glass products, not-
ably those of Tiffany furnaces. A com-
bination of iridescent and glossy finishing,
however, is usually restricted to Lbtz, and
is not seen on any Tiffany pieces. Other
makers of fine iridescent glassware were
the Quczal Art Glass & Decorating Com-
pany already mentioned, founded b>
Martin Bach (formerly an employee of
Tiffany Furnaces), in Brooklyn, New
York. The Durand Art Glass Company
produced beautiful iridescent glass at its
factory in Vineland, New Jersey. Late-
pressed iridescent glassware was produced
notably by the Northwood Company of
Wheeling, West Virginia, and Indiana,
Pennsylvania, the Fcnton Art Glass Works
of Williamstown. West Virginia, and the
Imperial Glass Company ol Belaire, Ohio.
Pale de verre, which was known in
antiquity, was revived in modern times by
the Frenchman Henri Cms (1840-1907).
The making of pate de verre is a technique
which lies somewhere between pottery and
glass-making whereby a plastic material of
powdered glass can be made into sculp-
tural forms or vessels by a process of
moulding. Henri Cros started his career as
a sculptor and painter, but was continually
fascinated by ancient techniques, so he
combined both arts in producing models
in coloured wax as craftsmen did in the
16th century. He evidently wished to
discover a plastic substance which could
be used for polychrome sculpture, so he
set to work to discover the lost secret of
plastic glass or pate de verre. It was only
after many years that he found a com-
position of powdered glass that could be
coloured and moulded. At home, and later
at the Sevres factory, he conducted
numerous experiments, and finally suc-
cessfully produced his own pale de verre.
Between 1893 and 1903 Henri Cros
produced a famous series of reliefs in
several colours in pate de verre. To produce
them, he placed in a hollow mould of
refractory clay a mixture of powdered
glass and other constituents in a soft pasty
condition, which was allowed to dry for a
time. It was then fused in a muffle furnace,
the mould breaking away, and the baked
shape was then ready to be polished or
wiped clean. The exact constituents or
how they were worked were never dis-
cussed by Henri Cros; the only informa-
tion he disclosed was that he used ‘un-
coloured powders made from blocks of
glass produced in crucibles’ which was
something of an over-simplification. His
son Jean was the only person to directly
follow in his footsteps, producing works in
pale de verre in his style. Dammouse,
Dccorchcmont and the rest found their
own individual interpretations of pate de
verre.
Albert Dammouse (1848 1926) was a
potter at the Sevres factory and began
experimenting with small vessels in pale
de verre in 1898. The material he used was
a soft enamel paste somewhere between
soft porcelain and glass, basically different
from that used by Henri Cros. The
products had a slight translucency. He
moulded this material into fragile vessels
with delicate flowers in pastel shades. It
could be said of his work that he showed
off the technique of pate de verre to the
best advantage and achieved the finest
harmony between form and material in the
vases he produced. Another worker in
pate de verre who deserves a mention is
Georges Despret (1862-1952); in the
Exhibition in Paris in 1900, he showed
some small bowls in ‘natural’ shapes, of a
heavier pate de verre in dark shades.
Despret’s pate de verre was a dense, almost
opaque, yet richly coloured paste, remin-
iscent of precious stones, which was some-
times engraved. Emile Galle also occasion-
ally made objects in pate de verre.
By Francois Decorchemont, France, i.iuio
Hi. 178 mm (7 in.)
From 1904, Francois Decorchemont dedi-
cated himself completely to the making of
vessels in pale de verre. He had been
originally a painter and potter, but found
the medium of pale de verre more satisfy-
ing. In his early work he used to put his
paste in the mould until it dried sufficiently
to be removed, then he proceeded to shape-
it as a potter did, and bred it in a muffle
furnace. In his later work he never re-
moved the paste from the mould, with
much better results. His first works were
made in a fine but opaque substance which
was rather grey and dull. It was only after
he returned from the First World War,
towards 1920, that he discovered the
formula for a hard, translucent material,
made up of silica and oxide colouring
agents in entirely new proportions. This
material was placed in a mould based on a
plaster model, the thickness being regu-
lated throughout.
vase in green pale de verre
By Francois Decorchemont. France, 1930
Hi. 162 mm (6-38 in.)
Decorchemont’s paste was baked for a
matter of 20 hours in an oil furnace he had
designed on the same lines as an oil lamp.
It was allowed to cool slowly, before being
removed from the mould, and then the
parts that were to look bright against a dull
background were polished. Until 1914 he
had made small vessels decorated with
animal or plant motifs in Art Nouveau
style. Between the wars he continued his
work in pate de verre, which differed from
that of other makers in that he worked with
a fairly heavy material, reminiscent of
natural stone in consistency and colouring.
He moulded this into plain shapes, at
times somewhat hard and angular in
outlines. The vase illustrated, in green
pate de verre, is an excellent example.
When his glasses were exhibited in 1925,
the Recorder of the Glass Section, Antonin
Daum, commented on their ’style, their
form and their sober magnificence’. In
later years Decorchemont did some ex-
quisite sculptural work, which in both
material and shape is reminiscent of jade.
plaque in white vitreous paste depicting
oliver cromw ell
Tassic. England, r.1700. Ht. 152-5 mm (6 in.)
James Tassie (1735-99), his nephew
William (1777-1860), and their successor
(from 1840) John Wilson, made original
portraits and copies of engraved gems in a
white vitreous paste related to pate de verre.
James Tassie was born at Pollokshaws,
near Glasgow, and began his career as a
stonemason. He learnt how to make casts
of engraved gems in glass paste from Dr.
Henry Quin of Dublin and in 1767
established himself in London, where he,
and later William and John Wilson, pro-
duced their medallions, casts and reliefs in
white and coloured paste. Tassie’s medium
was a finely powdered potash-lead glass or
pate de verre, which was first softened by
heating. When fully plastic, the glass was
pressed into a plaster of Paris mould,
which had the impression of the subject
being reproduced on its inner surface.
When an original portrait relief was being
made, a wax impression was first modelled,
from which a plaster mould was then made.
finger bowl and plate in ‘tortoise-shell’ glass
About 1880. Ht. 102 mm (4 in.)
‘Tortoise-SkeW Class was made in both
the U.S.A. and Europe. The ware has a
glossy finish, and the brown mottling is
enclosed between two layers of glass. An
interesting description of the process is
given by a German chemist, Francis Pohl
of Silesia, who received provisional pro-
tection only on a patent registered on
October 25, 1880. Several bubbles of
different shades of brown glass were
blown and then broken into small pieces.
Next, a bubble of plain glass was blown
and cut round the middle, leaving the
lower portion adhering to the blow-pipe.
While this was being done another bubble
of plain glass was being blown and rolled
in the fragments of brown glass, which
were carefully marvered in. This bubble
was inserted in the cut-off upper portion of
the first bulb, and the two were blown
together. The bulb was then reheated and
blown into the required article.
Steuben Glass Works. U.S.A., early 20th century
Ht 254 mm (10 in.)
Cluthra Class: Fred ( .arder of the Steuben
Glass Works of New York was responsible
for many developments in the coloured
glass field. Steuben depended wholly on
its sales of coloured glass to stay in busi-
ness, so vast ranges of colours and a great
variety of shapes were available. One ol
Fred Carder’s developments was the so-
called Cluthra glass, which is a partially
transparent, two-layered glass. The exam-
ple shown is the most common shape in
the Cluthra line. Between the two layers of
glass small air pockets in the centre of
white splotches have been introduced by
the use of chemicals; the air pockets are
slightly off-centre of the white marks.
Cluthra comes in single colours as well as
in shaded pieces; sometimes the pieces arc-
signed. The Kimball Glass Company,
Vineland, New Jersey, also produced a
cluthra-type glass. Knglish Gray Stan
glass, produced in the 1920’s, likewise-
made use of Cluthra decoration.
VASE IN ‘INTARSIA’ GIASS
Hy Frederick (larder. Steuben Cilass Works.
U.S.A., late 1920s early 1930*5
Ht. 15a mm (6 in.)
‘Intarsiu’ glass, made at the Steuben Glass
Works, Corning, New York, in the late
1920’s and early 1930’s, was considered by
Frederick Carder to be his greatest achieve-
ment in artistic glass-making. The name-
was probably derived from mlarsiatura, a
type of 15th-century Italian marquetry.
1 n tarsia pieces are made up of three livers
two clear, colourless layers encasing a layer
of coloured glass which forms the design.
To make a piece such as the one illustrated.
Carder would blow a bubble of clear
colourless glass and case this with a thin
layer of coloured glass. This was allowed
to cool, and a design was etched through
the outer coloured casing. A further gather
of clear, colourless glass was then taken up,
which sealed in the coloured design. The
bubble was then blown to the required
shape—usually a vase or a bowl, though a
few wine-glasses were made.
Powdered Glass Decoration: In 1806, John
Davenport of” the Davenport firm at
Longport, Stoke-on-Trent, England, pa-
tented ‘A New Method of Ornamenting
of all Kinds of Glass in Imitation of
Engraving or Etching, by Means of which
Borders, Cyphers, Coats of Arms, Draw-
ings, and the Most Elaborate Designs may
be Executed in a Stile of Elegance’. A thin
coating of a powdered glass paste was laid
upon the surface of the glass, and a pointed
tool was used to scrape off the coating into
the desired pattern. The glass was then
light!) fired, so that the decoration fused
with the surfaceof the glass. The ornamen-
tation does not really resemble engraving
or etching, but is entirely pleasing. It is
presumed that this patent refers to a group
<il glasses, with the word ‘Patent’ inscribed
on their bases, which arc decorated with a
\anety of patterns, including heraldic-
insignia, and elaborate sporting scenes
with costumed figures dating to the
beginning of the century.
Decorative Inclusions: Apsley Pellatt
(1791-186?) established a glass-house in
Kalcon Street, Southwark, in London. He
was interested in the French process <il
‘cameo incrustations’, or objects contain-
ing ’sulphides’. In 1819 he patented
several methods of embedding small white-
paste figures in clear glass. The process,
which he first called ‘crystallo ceramic-’,
then ‘cameo incrustations’, involved the
enclosing of medallions and ornaments ol
pottery ware, metal or refractory material
in glass. The ornament was pre-heated
then covered with the hot glass; some
difficulties were encountered, due to the
differing rates of contraction and acci-
dental air bubbles. He decorated many
objects in this technique, including paper-
weights, decanters, smelling bottles, wine
glasses, girandoles and plaques. As in the
cup illustrated, the glass vessels were often
finished by fine cutting. The process was
apparently first used in Bohemia in the
mid-18th century, and was later developed
by the French factories such as Baccarat
and Clichy.
The making of objects in crystallo ceramie
has been previously attributed to Bohemia
from the 13th, 16th and late 18th cen-
turies. However, most Bohemian examples
of the technique seem to date to the first
half of the iqth century. Dionysus Lardner
in his treatise on glass-making dated 1832
said that cameo incrustation was first
attempted about 50 years before (that is,
about 1780) by a Bohemian glass manufac-
turer. His success was indifferent, for
‘the material of which he made choice for
his figures, expanded and contracted very
unequally with the surrounding glass, and
their adhesion to it was consequently
imperfect’. Lardner later spoke of the
success of the Frenchmen Saint Amans
and Desprez and of the Englishman
Apsley Pellatt in cameo incrustation. The
most successful of Apsley Pellatt’s methods
involved the use of a mixture of china clay
and supersilicate of potash for his cameos.
These were slightly baked, and then
heated to redness in a muffle furnace,
ready for use with the glass.
Thomas  Sons. Knyiland. 1SX7
Diam. 152 mm (h in.)
A cylindrical flint glass pocket attached to
the end of a hollow iron rod was prepared.
The hot cameo was inserted into this and
the end of the cylinder was closed. Air was
then sucked out of the hollow iron rod,
causing the collapse of the glass on to the
cameo, so that glass and composition figure
became one homogeneous mass. Numer-
ous examples of cameo incrustation can be
found in tqth century glass from French,
Bohemian and English glass factories.
Objects made include plaques, pendants,
scent bottles, covered boxes, tumblers,
goblets, \ ases, and of course paperweights.
Both clear and colourless glass and col-
oured glasses were used in their manufac-
ture. The bowl illustrated is a rarity, since
the cameo incrustation is used in conjunc-
tion with Satinglass, though of course the
cameos are enclosed in clear glass and
applied to the sides of the bowl. Two
cameos of Queen Victoria of England are
attached to the front and back of the bowl,
which was made by Thomas Webb & Sons
in 1887, to commemorate Victoria’s Dia-
mond Jubilee.
doorstop (paperweight in green bottle glass
with ei.ower decoration enclosed
Norlh of Kngland, late igih century
Ml 127 mm (5 in.)
Towards the later part of the 19th century
popular glassware items were the heavy,
clear green glass doorstops or rough
paperweights produced in some factories
in England. These made decorative but
useful glass objects available to working
people. They were made of green bottle
glass, and were of a tall beehive shape, very
often containing the airy pattern of a
flower, as in the example illustrated, or
else enclosing an arrangement of spaced
bubbles. It has been discovered that a few
of these glass doorstops bear the same
stamp that can be found on the base of
bottles made at the Kilner factory in
Wakefield. It is also known that a specially
designed doorstop of this type, enclosing
a ceramic bust—presumably of Queen
Victoria—was made for the 1887 Jubilee
in a glass-works at Knottingley in the
West Riding of Yorkshire.
‘graal’ glass
Simon Gate, Orrefors, Sweden, 1917
When the factory of Orrefors, Sweden,
engaged the two artists, Simon Gate and
Edward Hald to design glass, one of the
major objects of the director and manager
of the factory was that they might be able
to improve on the factory’s production of
cascd-glass vases done in the manner of
Galle since 1914. In 1916 Albert Ahlin, the
manager, Knut Bergqvist, master glass-
blower at the factory from 1914, and Simon
Gate worked out their improvements.
They called their new technique ‘Graal
glass’. In Galle’s cased-glass the process of
cutting and etching the ornamental pattern
from two or three or more layers of glass
was all-important. In ‘Graal glass’ this was
just an intermediate stage, after which the
vessel was subjected to working in the
furnace, where the ornaments acquired
that fluidity which is their greatest fascin-
ation. Gate liked designs in many colours,
with figures in vivid movement.

Earlobes, necks, wrists and fingers are among the chief parts of the human anatomy which lend themselves to applied decoration. As with so many innovations in the field of jewellery, the practice of piercing the fleshy protuberances of the ears for the attachment of ornaments symbolic of race, tribe and status seems to have originated in Western Asia. A sculptured slab from the palace of Ashurnasirpal II (8 83-8 59 BC) in the British Museum depicts the king in profile wearing a long earring with an acorn-shaped terminal. At various stages of history men, women and children have been subjected to the ordeal of ear-piercing, though the male fashion for earrings has been mysteriously intermittent and sometimes a national rather than a cultural phenomenon.
English courtiers adorned themselves with single pearl drop earrings in the late 16th and early 17th centuries but some hundred and fifty years later, when similar ornaments were worn by French officers, the vogue aroused astonishment and hilarity in England. Thomas Rowlandson capitalized on the reaction in 1786 with a cartoon showing French officers in various stages of donning their uniforms-, they all sport earrings. Eleven years later the diarist Mrs Lybbe-Powys was struck by the sight of a French emigre officer in Bath ‘with large gold earrings’. But for all the British distaste, the custom had become general in France and Italy, from the highest to the lowest. Napoleon himself did not wear them, but his brother-in-law Joachim Murat, whom he made King of Naples in 1808, undoubtedly did. In the mid-197os, when the fashion recurred, young Englishmen were among the most enthusiastic proponents of the emblematic use of a single earring.
There is no evidence of the methods employed to pierce ears in prehistoric times but references in more recent centuries establish that the well-to-do employed the services of professional jewellers when the girls in the family were considered old enough to wear earrings. The experience for the victims was usually made palatable by the prospect of possessing a pair of ornaments of their very own. But even that prize was sometimes insufficient. The august presence of a royal jeweller, Dutens, summoned by Mrs Delany to attend her niece Mary Dewes in 1756, failed to persuade the young girl to submit to the operation. She held out for two months before succumbing. Girls of less affluent families were subjected to amateur attention with the aid of a needle, which pierced the ear while the lobe was supported by a piece of wood or other solid material. A cork was popular in the 19th century and later.
Children were dressed as miniature adults until the late 19th century and the ornaments worn by girls reflected contemporary fashions. There are comparatively few breaks in the history of female earrings charted by the authors, the longest being the Middle Ages, when the fashion for swathed heads concealed not only the hair but the ears as well. In the late 16th century women showed a renewed interest in ear ornaments, especially in the pearl drops which predominated for the next century and a half and survived thereafter. They were far more comfortable to wear than the girandole earrings which rivalled the drop type from the late 17th century. Usually comprising a top, an intermediate device such as a bow and three (or more) drops, these articles were so heavy that a secondary loop was often attached to the hook which passed through the ear and a ribbon threaded to the hook to be secured to the hair, taking some of the weight off the ears. This device helped, but many women reduced the period of discomfort by carrying their earrings in their pockets to parties and balls and assuming the ornaments on arrival, padding the backs of the lobes with small pieces of silk.
Fashionable women inevitably suffered permanent distension of the earlobes, which were dragged down by the weight of the girandoles. This fate did not prevent their descendants from participating in another fashion for huge earrings in the late 182os and 183os and suffering the same consequences. One of the most enthusiastic young adherents of the vogue was the future Queen Victoria, who often wore her grandmother Queen Charlotte’s girandole earrings of 1761. Photographs of Queen Victoria in old age, when she sometimes took to simple single-stone or pearl earrings, show them lodged on elongated earlobes. Fortunately the huge variety of new types and fittings means that no one now has to wear one kind of earring for a prolonged period.
The earliest archaeological evidence for earrings dates from the 3rd millennium Bc, but it seems likely that men
and women will have adorned their ears with, for example, shells and polished peb-
bles for centuries before that.
The idea of piercing the earlobe to insert a metallic ornament originated in the Orient. From the start earrings can be divided into two types: the simple rigid hoop in its numerous variations, and the more elaborate articulated pendant. In Antiquity, they were amongst the most popular means of personal ornament.
Around 2500 BC Sumerian women were adorning their ears with gold earrings in the form of single or double crescents, as revealed by findings in the royal graves of Ur in what is now Iraq. The crescent form, comprising two thin sheets of gold soldered together with a hollowed centre, was a simple yet successful design which was to spread towards the West and remains to this day a favourite shape of earring. More elaborate Babylonian examples of the early 2nd millennium Bc, also from Ur, show how the simple crescent motif could be embellished with embossed decoration, the details picked out with filigree and granulation.
Minoan and Mycenean
Early examples of earrings with a tapered hoop design, in a way a thinner version of the crescent- or boat-shaped earring, have been found in graves in Anatolia and Greece. Hooped earrings of gold, silver and bronze, tapered at the ends, have also been excavated in Crete and date from the Middle Minoan period (2000— 1600 BC).
It is not until the second half of the 2nd millennium BC that we find variations and elaborations of the crescent or hoop type; during the Late Minoan and Early Mycenean period (i 600— i 100 Bc) earrings in the form of scalloped or tapered hoops were common in Mycaene, while in Crete during the same period the most widespread form of earring consisted of a tapered hoop decorated with a conical pendant representing a clear progression from the earlier simple hoop.
The tapered hoop supporting a conical pendant was also popular in Cyprus, where several examples come from 13th and 12th century BC graves in Enkomi. Judging from the number of extant examples, this type had a long life; a less elaborate version consisting of a tapered hoop supporting a smaller bead cluster is well testified both in Crete and in Cyprus; it may have been cast in one piece, as a steatite mould of this shape has been found in Crete. This type continued in Cyprus throughout the Dark Ages, reappearing amongst Greek designs of the 7th century BC.
By the end of the 2nd millennium BC, the hoop earring, tapering to a different degree at each end, was widely dispersed in the Aegean world, Western Asia, Cyprus and Syria, as revealed by many excavations.
In Cyprus, from the middle of the 2nd millennium BC, and particularly during the third quarter, earrings were very popular and may have had some supernatural significance, since contemporary painted terracotta idols in the form of stylized nude females, probably fertility symbols, have their earlobes pierced two or three times and large terracotta hoops suspended from them.
The simple, tapered hoop was worn there from about 1400 BC, where it arrived possibly from Crete but more likely from Syria; it continued in Cyprus for a long time, surviving throughout the Dark Ages, and was reintroduced from there into Greece around the 7th century BC.
A variation of this type, of either Cypriot or Syrian invention, consists of a hoop of twisted or plaited gold wire. Also to be found is the ‘leech’ earring, a sort of elongated tapered hoop, the lower part expanded into a fat crescent motif. Hoops supporting clusters of beads or elongated conical pendants decorated with granulation were, as we have already seen, as popular in Crete as they were in Cyprus. A typical Cypriot earring of the 13th century BC was a hoop supporting a bull’s head pendant stamped out of thin sheet gold. Although the shape of the pendant is a common Mycenean motif, no contemporary examples have been found on the Greek mainland.
When, in about 1 100 BC, the Mycenean world succumbed to the Achaean invasion, which was followed by the three centuries of poverty and near-barbarism known as the Dark Ages, the arts declined and jewellery in precious metal became rare. It is likely that the main sources of gold at the time were the tombs of earlier periods. Among the limited number of gold ornaments such as finger-rings, bracelets, pins and fibulae, there survived a small number of spirals, the purpose of which is still not certain, but which may have been earrings or hair-ornaments.
The brilliant civilization of Cyprus was destroyed at the same time, but traditions lived on and the Achaeans left intact the long-established Mycenean techniques. Goldsmiths worked throughout the Dark Ages preserving and perpetuating forms and designs that were to be reintroduced into Greece around the 7th century BC.

Tudor Gothic Period Stools, Chairs and Tables

EVOLUTION OF THE CHEST
We have spoken of the chest as being part of the furnishing of the early house, and we deal with it first, not only because it was a most important piece of furniture, but because so many other pieces were evolved from it. It was used for all sorts of purposes : the storing of clothes or valuables, for a travelling chest, as a seat, or (in the larger sizes) even as a bed. In fact it was its all-round usefulness
that was its great virtue, and accounts for the comparatively large numbers which have survived.
Early Hollowed-out Chests.—In its earliest form it was merely hollowed out of a solid baulk of timber, the lid usually following the line of the trunk in shape and so being rounded. Such chests belong generally to a period before the fourteenth century, after which the more economical method of jointing up timber was evolved. Fig. 2 is an example. It stands in the old church at Harbledown, Kent.
A curious example of how convention sets its stamp on things is shown in the next example, Fig. 3, which exemplifies the next stage in which separate boards were peggedtogether. Note how the lid, although not actually rounded, is raised in the centre and is so a survival of the older hollowed-out solid lid. Another feature of special interest is the way it is hinged. The end pieces into which the lid boards are housed are made extra wide at the back and fit outside the ends of the lower chest portion. Pegs passing through both enable the lid to be raised. It was a system of hingeing (usually termed pin hingeing) which survived until some time during the thirteenth century, when it was replaced by the more convenient metal strap hinges.
Planked Chests.—At the time our story begins—the late fifteenth century—most chests were little more than a series
PROBABLE EVOLUTION OF FORM AND SETTLE.
The construction of the form is practically identical with that of the
planked chest, and it is probable that the one was evolved from the other.
In the same way the early settle was really only a chest with the posts
and back continued upwards.
of four boards nailed or pegged together to form the sides, and a bottom and lid. It was a method of construction about which there was something rather obvious. It was essentially simple, a serious consideration in days when every operation had to be done entirely by hand, and up to a point it served its purpose.
At the same time it had its disadvantages. For one thing it was extremely limited in the form and degree of decoration that could be given (and the Renaissance craftsmen were extremely fond of decoration), and, what was a more serious point, it was not sound structurally. All timber is bound to shrink, and providing the entire shrinkage takes place during the seasoning no harm is done. But this is seldom practicable. A board which has been seasoned for years may still shrink more after it has been worked and built into a piece of furniture.
Now if the grain of these chests is examined (take Fig. 4 for example) it will be seen that that of the front and back runs horizontally from side to side, whereas that of the ends is vertical. As wood always shrinks across the grain, it follows that the front and back are trying to reduce their width but are prevented from doing so by the upright grain
FIG. 18. PANELLED BACK CHAIR DECORATED WITH INLAY AND
CARVING.
About 1600.
A big advancement on the previous chair. The lower part Is open, and
the arms are unpanelled. The back has a definite incline, and, although
back legs are upright, they are made extra thick at the bottom to give
the good stability.
of the ends. As a consequence they have to split, and it is this that accounts for the bad condition in which the fronts of these chests are often found. If the reader turns to P. 21 he will find the point explained yet more fully.
Framed-up Construction.—It was to overcome this fundamental fault that the panelled system of construction was evolved, in which the strength was provided by a frame-work joined at the corners with mortise and tenon joints, the centre portion being filled in with a panel which rested in grooves worked in the inner edges of the framework. The panel was entirely free in the grooves, so that in the event of shrinkage no harm whatever would be done. Fig. 12 shows the idea. It was a system which has remained as a standard practice ever since.
The effect of this new form of construction on the chest is shown in Fig. 5. It is virtually four separate frames except that the legs are part of both front and sides. The
FIG. 19. LONG FORM WITH GOTHIC SHAPINGS.
Early 16th century.
This was the usual seating accommodation for the majority of people.
In a hall there might be one chair, the seat of honour for the principal
person (hence the term “chairman “), but forms or stools were good
enough for the others.
bad effects of shrinkage are eliminated, since the panels are free to shrink.
Whilst still on this subject of panelling, it is instructive to note that the width of the individual panels was seldom more than that of a single board, this saving the necessity of jointing. It is a useful point to remember because it accounts for the comparatively narrow panels found in early oak work.
TREATMENT OF PANELS
Linenfold Panels.—A favourite method of embellishing the panels of these chests was to carve them in the linenfold pattern as in Fig. 5, and many ingenious theories have been put forward to account for the origin of this device. That it was carved to represent a piece of folded linen is un-doubtedly true, but it probably owed its origin to a practical reason, especially as the earlier patterns were of simple form, just an ogee-shaped section, thin at the edges and rising to a point at the centre.
Most early oak was riven, that is, the log was cleft at the end with a wedge and so forced apart. The method was far less laborious than sawing, and it was stronger since it followed the natural line of cleavage. Fig. 9 shows the
FIG. 20. SIMPLE TUDOR GOTHIC STOOLS.
Early 16th century.
Note that the Gothic shaping of the uprights in the stool to the right is
similar to that in the long form in Fig. 19.
FIG. 21. ELIZABETHAN BOX
STOOL.
Late 16th century.
A small box space is formed beneath the seat, the latter acting as a lid.
process. At the same time the boards were not so straight and the surface was liable to have ridges in it. These ridges may have suggested the lines of the folded linen, and in any case the edges had to be reduced in thickness to enable them to fit in the grooves of the framing. Thus it seems to be a case of the craftsmen making the most of the peculiarities of the material, and adapting the design to suit the natural formation.
The enlarged illustration on p. IS shows a linenfold pattern in closer details in which the wood is cut thin at the sides to enable it to enter the grooves. This cutting-away forms a part of the design. Note also that the recessing of the groundwork at top and bottom to throw the folds into relief answers the same purpose.
Curved Rib Panels.—Another form of decoration was what is usually termed the curved rib design, an example of which is also given on p. 18. It probably owed its origin to the same causes as the linenfold. If the two illustrations C and D are compared it will be seen that the linenfold has the same downward curve in the ends of the folds at the top. The only fundamental difference is the introduction of the centre fold. The thinning of the edges occurs in both, and the riving of the timber would make it suitable for either one or the other in accordance with the amount of timber left by the cleavage. In fact it may be that the craftsman decided which treatment he would give after the timber had been riven. Or, alternatively, assuming that he had some timber already riven, he would select that which was the more suitable for the design he had in mind.
Tracery Designs.—This, however, is largely theory, and we may now turn to yet another kind of panel, the origin of which is more certain. This is the traceried panel of which two examples are given on p. 18. They were taken from the Gothic traceried windows which were a common feature of buildings of the period. Generally they were pierced right through, and this had the advantage of providing ventilation for such items as were used for storing food. When this was undesirable, for instance in the front of an ordinary chest, the ” window ” portions were just recessed, leaving the ribs standing up in high relief.
It is sometimes argued that the ecclesiastical appearance of these chests suggests that they were made originally for a church, but this is by no means necessarily the case. That the traceried designs were similar to the work found in churches is true, but it must be remembered the same thing applied to all secular work, because there was no other style than the Gothic. The Gothic style was evolved chiefly from the building of churches, but secular work followed on precisely the same lines.
Renaissance Designs.—The panel at E on p. 19 is of particular interest in that it shows the beginning of the new spirit the Renaissance brought with it. It is true that there are features about it that are reminiscent of the Gothic, but the main design is something outside what the latter pro-duced. It was probably a case of a man brought up in the Gothic tradition feeling his way rather cautiously in an unfamiliar element. It is somewhat meaningless in the treatment of the upper scrolls terminating in the horizontal band with the leafwork sprouting below, and one has the feeling that here was a man to whom new ideas were suggested but who was uncertain what to make with them.
Romayne Panels.—Another basic motif found in early Renaissance work was the Romayne panel, which consisted of a wreath of leafwork encircling the carved representation of a head, usually in profile. Such designs were often found on buildings, for instance, in the Gateway of Hampton Court Palace, and they provided a rich field for the carver’s fancy. Sometimes they were purely mythological head pieces, often of Roman origin, the head having the wreath of victory around the brow. On the other hand, these busts were often carved as a portrait of the person for whom the chest was made, and one can imagine the self-sufficiency of the owner as he would point out the likeness to his friends—though to judge from some of them the result could hardly have been flattering.
We have gone into the details found on these chests at some length because they form the basis upon which ornament of the time was built up. First the Gothic tracery or the linenfold, then the curious intermixture of the Renaissance with the Gothic, and finally the purer Renaissance, if such a term may be applied to a style which was handled in so free a way. Whatever its merits as a design, however, it had this about it, that it was extremely virile and spirited in its execution. A man came across this and that motif, and he worked on them with a complacent disregard for their true meaning and gave of his best in dealing with them. The result was the production of the style we know as Tudor Gothic.
At this point we may leave the chest for the time being. That made during the last phase of the period, that cf Elizabeth, was similar to that in Fig. 5, except that the linen-fold device was replaced by Renaissance details, and the framing was usually more or less elaborately carved. We shall pick up the thread again when we come to the next chapter dealing with the Jacobean times.

Mid 16th century.    About 1530•
FIG. 7. TUDOR GOTHIC PANELS WITH RENAISSANCE
INFLUENCE.

TRESTLE TABLE WITH GOTHIC LINES.
First half 16th century.
These tables were made specially so that they could be taken to pieces
and stacked away flat. The withdrawal of the wedges enabled the rails
to be pulled away clear of the trestle ends.
FIG. 23. DRAW TABLE OF ELIZABETH’S DAYS.
Second half 16th century.
This is the earliest form of extending table, and it is still the most reliable.
The extending leaves rest beneath the main top, and as they are pulled
out they are caused to rise by means of tapering bearers beneath.

USING THE RIVING IRON TO CONVERT TIMBER,
The iron was placed at the end of the timber and struck with the ” beetle to enter it. It was then levered over so that the timber was split.
FIG. 10. THE ADZE.
This was used to clean
the surface after cut-
ting out.
FIG. 11. SCRATCH TOOL.
The chief purpose of this was to work
mouldings. It was simply worked
back and forth.
FIG. 8. CUTTING OUT TIM-
BER WITH THE PIT SAW.
The man at the top was in
control, and it was his job to see
that the saw kept to the line.
He was called the top sawyer.
The man in the pit simply helped
to supply the power.

CARVING OF
FIGURES SEATED ON
A SETTLE.
Late i5th century.
Although the whole thing measures only some IS In. in height, it is of special Interest in that it shows the type of settle in use at the time it was carved. Note the linenfold panels, and the way in which the front framework reaches
right to the floor.

FIG. 16. PENITENT STOOL FROM
FORDWICH CHURCH, KENT.
Date uncertain, but probably earlier than i5th century.
The construction of this is crude in the
extreme. It is simply a solid piece of timber
with the upper part chopped out to form
the seat and back.
FIG. 17. EARLY FORM
OF PANELLED CHAIR
WITH LOWER BOX
PORTION.
First half 16th century.
The general form is
similar to that of the
settle shown in Fig. 15,
and the idea was prob-
ably prompted by the
chest. The back In this
case has a slight slope,
though in many similar
chairs it was quite
upright.

Antique Engraved Glass

Engraving, whereby a decorative pattern is finely cut onto the surface of the glass, dates back to Roman times. The very earliest types of engraving were diamond-point engraving, which involves scratching fine lines into the glass with a sharp instrument (usually a diamond stylus), and wheel engraving, where the design is cut into the glass by means of a rotating
wheel. Stipple engraving, a more sophisticated form of diamond point engraving, where patterns of tiny dots rather than lines at used to create a shaded design, was first used from c.1621 acid etching, which involves burning a design out of the top layer of glass with acid, evolved with the invention
hydrofluoric acid c.1770 and was widely used in Britain.
Although glass was engraved from Roman times, and examples of fine engraving exist on 15th–century Venetian glass, the widespread use of such techniques as diamond-point and stipple engraving dates mainly from the second half of the 16th century. These techniques were introduced to decorators in the Low Countries by itinerant Venetian glassworkers. Wheel engraving was first used in Germany in the late 16th century.
DIAMOND-POINT AND STIPPLE ENGRAVING Diarnond-point engraving, in which the design or decoration is scratched onto the surface of the glass by a sharp diamond stylus, is particularly suited to thin-walled glass too hard to withstand wheel engraving. It was the only engraving technique suitable to
be used on delicate cristallo glass. Diamond-point engraving was therefore quite common on 15th-century Venetian and later facon de Venice (”in the style of Venice”) glass. However, the technique did not reach its apogee until it was taken up in the Low Countries during the 17th century, where it was carried out by both amateur (those who decorated glass as a hobby) and professional glass decorators. Anna Roemers Visscher (1583-1651) was an amateur glass decorator in Amsterdam, where she engraved delicate designs of flowers, fruit, and insects, as well as lines of poetry in calligraphic script, on beakers and Romer (a type of drinking glass). Another distinguished amateur glass decorator, Willem Jacobsz van Heemskerk (1613-92), in Leiden, produced most notably free-flowing calligraphic designs on such wares as bulbous serving bottles and jugs. Among the best-known professional engravers was Willem Mooleyser (active 1685-97), from Rotterdam, who used diamond-point engraving on bowls, flasks, goblets, and Romer.
In stipple engraving, which is a development of diamond-point engraving, a stylus is very gently tapped on the glass to make a design built up of small dots; these dots create areas of light (dense areas of dots) and shade (sparse areas of dots) to create the delicate design. The detail may be so fine that the design will Only be seen clearly when the glass is held to the light. Common designs include portraits and allegorical Subjects. Examples of stipple-engraved glass are rare,
as the technique is slow, extremely difficult, and requires great skill and patience.
As with diamond-point engraving, the most notable designs were produced by glass decorators from the Low Countries. Visscher introduced the technique to The Netherlands c.1621, but perhaps the best-known exponent was Frans Greenwood (1680-1761), an amateur glass decorator in Dordrecht who employed the technique exclusively from c.1722. He incorporated floral and fruit motifs and also copied designs from contemporary mezzotints and paintings. One of his followers was David Wolff (1732-98),
), a painter who
produced his own designs and portraits. Some of Wolff’s pieces are signed and his style inspired other artists towards the end of the century; such pieces are commonly known as “Wolff” glass. Another follower of Greenwood was the painter and engraver Aert Schouman ( 1710-92). Greenwood, Wolff, and Schouman all mainly worked on glass thought to have been made in the factories around Newcastle-upon-Tyne in northern England, which made a soft glass that was better suited to the stippling technique than the more brittle soda glass.
WHEEL ENGRAVING
In wheel engraving, a mechanical wheel fed with an abrasive paste (typically a mix of oil and emery) is used
cut a design onto a glass surface. The technique, which has been used since Roman times, is best suited
thick-walled pieces, because the depth of the cut is an essential part of the design. The modern technique was probably developed between c.1590 and 1605, at the court of the Holy Roman Emperor Rudolph 11 in Prague, by the gem engraver Caspar Lehman 15-0-1622), who engraved plaques and beakers with portraits and allegorical subjects.
In Bohemia a new type of glass known as “lime” glass, in which chalk lime carbonate was added to the batch to give a strong, colourless crystal suitable for deep engraving, was developed c.1683. At about the same time water power was introduced to drive the wheels, and this also enabled deeper cutting. Especially notable is the work of Dominik Biemann (1800 1857), whose training at the Prague Academy of Drawing is reflected in his fine engraved portraits on beakers and medallions. Of particular note are the Baroque pokals lidded goblets) decorated with Hochschnitt (”high cut”) engraving by the Silesian Friedrich Winter (d.C. 17 12). One of Lehman’s pupils was Georg Schwanhardt the Elder 1601-70), who left Prague for Nuremberg where he established a workshop and founded a dynasty of skilled engravers, including his son Heinrich (1624l
The technique was further developed in the 19th century, as Bohemian craftsmen pioneered a process whereby glass was overlaid with a layer of glass in a different colour and then wheel engraved to show the design in the colour of the first laver. Two lavers of glass were standard, but sophisticated pieces were composed of up to four layers. Such pieces demanded great expertise, as each coloured layer cooled at a different rate, and with each additional colour the risk of cracking increased. Common decoration included forest and hunting scenes, rural views, and castles. However, most sought after are special commissions such as portraits of famous people, battle scenes, and important buildings. Highly skilled Bohemian craftsmen travelled across Europe, so many pieces of this type were produced in various countries.
Towards the end of the 19th century some fine wheel-engraved pieces with Hochschnitt and Tiefschnitt (incised or intaglio) decoration were designed by J. & L. Lobmeyr (est. 1823) in Vienna. The firm produced copies of 18th-century designs and worked in Classical and contemporary styles. Leading engravers who worked for Lobmeyr included Karl Pietsch ( 1826-83), Peter Eisert ( 1828-94), and Franz Ullmann (1846-1921 ).
Engraved glass was also produced in Sweden. In the 20th century some outstanding pieces were made at the Orrefors factory (est. 1898) in Orrefors, in the Sul Aland region. In 1916 Simon Gate ( 1883-1945) was brought in as a chief designer, and he was joined the following year by Edvard Hald (1883-1980). Gate’s designs typically feature elegant Neo-classical figures,
while Hald’s figures are more caricatured and are mostly shallow engraved. Between 1928 and 1941 Vicke Lindstrand ( 1904-83) also worked for Orrefors, producing stylish and elegant designs.
Diamond-point and stipple engraving
• CONDITION diamond-point engraving should be shallow, with ragged, slightly broken lines, minor damage will not greatly affect value of early pieces
• BEWARE copies were decorated by
enthusiastic
amateurs in the I 9th century; when dated there is no Confusion, but undated older glasses can be misleading
Marks
Diamond-point pieces may he signed on the foot or in the design
Wheel engraving
• TYPES OF GLASS 19th-century Bohemian coloured glass Was a popular base; this glass should feel heavy
• DECORATION late 18th-century pieces feature formal designs; heavy, ornate engraving is typical; high-quality pieces have elaborately cut, ornate feet

Pressed glass
The invention and development of mould pressing c.1820 revolutionized glass manufacture; previously an exclusive and highly priced commodity, decorative ,,lass became accessible to all. The technique involved pressing a gather of molten glass into a metal mould using a plunger. When the glass cooled, the mould was opened, and any excess glass attached to the seams was removed by hand.
NORTH AMERICA
The most important pressed-glass manufacturer in North America was the Boston & Sandwich Glass Co. 1826-88), founded by Deming Jarves (1790-1869), in Sandwich, Massachusetts. The firm produced inexpensive pressed-glass tableware in “lacy” glass with intricate stippled designs that resembled lace and covered the flaws caused by the pressing process; wares included table services and a range of coloured glassware. The earliest pressed patterns of Gothic arches, acanthus leaves, and scrolls were probably copied from cut glass. Another well-known company was the New England Glass Co. (1818-90), originally of East Cambridge, Massachusetts, and also founded by Jarves. Both firms specialized in the production of oil lamps and candlesticks with contrastingly coloured glass tops and bases. By the 1850s other pressed glass factories were also established throughout the Midwest.
Many firms produced brightly coloured pressed glass with a vivid orange or green iridescent surface, which is known as “Carnival” glass. It was made by spraying pressed glass with metallic powders, and was used to create eye-catching yet inexpensive tumblers, bowls, plates, and vases. Major makers include the Northwood Glass Co. (1888-1925) in Indiana, Pennsylvania, the Imperial Glass Co. (est. 1902) in Bellaire, Ohio, and the Fenton Art Glass Co. (est. 1904) in Williamstown, West Virginia. Between 1925 and 1950 mould pressing was widely used to mass-produce inexpensive glass items, such as trinkets, which were given away as premiums at petrol stations and in boxes of cereal, and also affordable pastel-coloured tablewares; these pieces are now known as -Depression” glass. Primary makers include the Jeanette Glass Co. (est. 1898) in Jeanette, Pennsylvania, and the Indiana Glass Co. (est. 1902) in Indiana, Pennsylvania.
BRITAIN
Mould pressing was used in the North of England before 1827, and from the mid-1870s was widely employed
by such firms as John Sowerby’s Ellison Glassworks (1847-1972) and George Davidson & Co. (est. 1867), both in Gateshead, Henry Greener & Co. (est. 1858) in Sunderland, and John Derbyshire & Co. (1873-6) in Manchester. Commemorative ware was
very popular in Britain, and in the 1870s John Derbyshire & Co. introduced patriotic mould-pressed figures to its range, including those of Britannia and Queen Victoria. In the 1860s
Henry Greener & Co. produced glass with a ground of small raised dots that was especially
well suited to press moulding. One of Sowerby’s most popular ranges was “Vitro-porcelain” glass, which closely resembled china. Launched in 1877, it was produced in several colours, including cream (registered as “Patent Queen’s Ivory Ware”), turquoise, white, green, and a marbled version known as “Malachite”. Ranges by George Davidson & Co., introduced in 1889, include opaque “Pearline” glass, which was produced in different shades of turquoise.
• DECORATION American pressed-glass designs are sharp; pieces with softer patterns are likely to be either copies or European; decoration is often in imitation of cut-glass designs; “lacy” patterns were also popular
• COLLECTING although primarily collected in the USA, pressed glass is now becoming more popular with collectors in Europe; generally, the more ornate the piece, the more desirable it will be
• BEWARE supposedly “rare” examples may be copies

Art Deco Glass
After a decline at the end of the Art Nouveau period, art glass became popular once again during the inter-war years. France was the leader in design and innovation, with the prolific Rene Lalique being the foremost glassmaker in the Art Deco style. Functional pieces were very often turned to purely decorative purposes, and Lalique’s moulded, opalescent, or frosted glass,
ranging from vases to architectural panels, spawned a gre many imitators. In the USA the Steuben Glass Works produce fine engraved stemware. Moulded glass was usually max produced and sometimes hand-finished; makers also used such techniques as enamelling and engraving to embellish glass -will the fashionable stylized motifs of the era.
Lalique, Daum, and Marinot Glass
European industrial decorative-glass manufacturers of the Art Deco period, most of which operated in France or Bohemia, were primarily influenced by the work of Rene Lalique ( 1860-1945). Many chose to copy his style and techniques, making clear or opalescent glass vessels and statuary with a frosted finish. The wealth of output provides a wide range of choice for collectors, and many focus on only one category, or even on one colour or motif. The present-day market is similarly led by Lalique prices, and most glass by other manufacturers, found throughout Europe, North America, and beyond, rarely rises above decorative value.
RENE LALIQUE Glass
Lalique began glassmaking in 1910, having already established a successful career as the leading jeweller of the Art Nouveau period, and in 1921 took over a large glassworks at Wingen-sur-Moder in Alsace to produce his designs. He was a prolific designer, and made an enormous variety of items, ranging from , and tablewares to clocks, lighting, and architectural panels. Most of his work was machine-made to a high standard. Lalique relied on metal moulds for casting or mould-blowing glass, and many items, particularly panels and larger vessels, show evidence of “chill marks”, or ripples, on the surface. Mould seams were often left, or only partially polished off. Certain objects, including vases, were made by Lalique himself (rather than by the workshop) using the cire perdue (lost-wax) technique. Since the mould has to be broken in order to retrieve the glass, each cire perdue cast is unique, and such items are highly collectable.
The majority of Lalique wares, and virtually all architectural panels, lighting, and table glass, are clear with a frosted or partially frosted surface. Opalescent glass was also used. Some vases were produced in colours, including amber, electric blue, and black, and these command
premium prices. Lalique created various forms of lighting, often in inventive shapes or containing geometric or figural decoration. Clear or opalescent light bowls are generally more desirable than those of a Yellow colour. Lalique designed several hundred perfume bottles, the rarest and best of which are as valuable as some coloured vases. Other categories of collectable interest include the range of 27 automobile-hood ornaments (car mascots), made from 1925 to 1932, boxes, inkwells, ashtrays, and letter seals.
THE INFLUENCE OF LALIQUE GLASS
Marius-Ernest Sabino (1878-1961) produced a wide range of vases, statuary, and lighting from c.1923 until the closure of his glassworks in 1939. Much of his work clearl displays the influence of Lalique; however, few examples are as finely executed as Lalique wares, nor were Sabino’s designs as imaginative. The best examples are in deep, opalescent glass of milky blue. Most popular are the highly stylized figures of women, while coloured vases, mostly black or smoky topaz, have a limited following. Sabino also
produced car mascots, often copies of designs by Lalique. Reproductions of Sabino’s wares using the Original moulds have been made since the 1960x.
Edmond Etling &- Cie (active 1920x-1930x) commissioned moulded opalescent glass, comparable in standards of design and manufacture to Sabino. Figures of draped female nudes produced during the mid-1920s, often in a pale-bluish tint, are especially collectable, with values rivalling Sabino and lesser Lalique. Other typical subjects were animals and ships, and some vases were also produced.
Other French glassmakers in Lalique style include the firm of Verlys, which operated in France and the USA; Andre Hunebelle, who specialized in lighting and frosted vases of geometric design; and the firm of Genet & Michon, makers of innovative lighting, frosted architectural panels, and vases. A large variety of frosted glass, geometric-patterned
glass geometric-patte lampshades, and hanging lights is reproduced today and can be found at reasonable cost.
DAUM GLASS
The factory operated by the Daum family in Nancy from 1875 to the present day produced some of the best and most distinctive French Art Deco glass of the late 1920s and early 1930s. Daum Specialized in artistic Art Nouveau overlay and etched glass until the
1920s, but introduced new lines in the Art Deco style before 1930, mostly under the direction of Paul Daum. The two most characteristic types of Art Deco Daum glass are the mottled and the acid-etched lines.
Mottled glass was usually of amber colour, often with golden metallic inclusions, and was used for vases and some lamps (which are far more desirable than vessels), blown into heavy metal armatures. The typical wrought-iron metalwork may be signed “Edgar Brandt” or attributable to the firm of Louis Majorelle 1859-1926) in Nancy. Daum glass of this type is relatively low in value as pieces tend to be cumbersome and a little sombre.
Vases, bowls, and table-lamps in heavy, thick-walled, vividly coloured glass with deeply acid-etched decoration are the most collectable Art Deco Daum. Colours include green, amethyst, amber, turquoise, and grey; monumental vases in “electric” colours, particularly bright blue and vibrant yellow, are highly sought after. Matt and polished surfaces were sometimes combined. Value is directly in proportion to the depth and complexity of the etched decoration; vessels with shallow, sparse decoration tend to be of later origin and are relatively inexpensive. Pale colours and a smoky grey arc also indicative of late origin (possibly post-World War II). Table-lamps are usually in thick, clear glass with a frosted or grainy surface texture and vertically etched grooves forming a geometric, abstract pattern. Lampshades are bullet-shaped (the more popular) or mushroom-shaped. Any authentic Daum etched table-lamp is of considerable value, particularly if it is of large scale. A few- shades of similar style were also made, but are generally less popular than lamps.
MAURICE MARINOT GLASS
Maurice Marinot (1882-1960) was a painter and glass artist who worked largely independently from c.1911. This glass was not mass-produced and is rarely found on the market; however, it is easily identifiable and widely collected, particularly in Europe. Marinot created mostly functional pieces such as vases, jugs, and bowls, often of abstract, sculptural form, and experimented with decorative techniques such as trapping bubbles or metal foil within thick, heavy walls of glass. Between c.1915 and 1918 Marinot made enamelled glass, which is somewhat less collectable than his later work and consists mainly of pale-coloured or bubbly vases and decanters painted with Art Deco-style flora, fauna, or figures in bright polychrome enamel. Later, internally decorated pieces are often in the form of stoppered bottles (the stopper may be a glass sphere), free-blown in thick, clear glass decorated with bubbling, inclusions, and streaks of colour, and sometimes deeply etched with geometric or figural patterns.
Rene Lalique
• TYPES before 1930: clear glass with partially frosted finish is most common; after 1930: almost all frosted and clear; some pale opalescent and pale yellow/amber colour; designs remained in production after Lalique’s death, when a new crystal glass N as used
• ALTERATIONS authentic but altered pieces of Lalique include vases with ground necks, perfume bottles with “married” stoppers, and opaque vases with “plugged” bases; all designs are recorded in a catalogue raisonne
• FAKES mostly inferior and of poor quality with signatures added; beware of post-war Lalique with the pre-war signature added
Marius-Ernst Sabino
• TYPES opalescent glass using typical Art Deco motifs
• REPRODUCTIONS since the 1960s old moulds have been used to make certain items; the opalescence is more intense than on the originals and map appear “oily-
• COLLECTING large, stylized female figures are the most popular
Etling & Cie
• TYPES most pieces are in opalescent glass, comparable in standard to Sabino
• COLLECTING figures of draped female nudes produced during the mid-1920s 920s are especially collectable; values rival Sabino and lesser Lalique; reproductions in frosted glass were made in France in the 1970s
Marks
Opalescent glass is marked with the name, usually with “France” or “Paris” added
Daum
• TYPES most characteristic are mottled and acid-etched
• FAKES these exist as similar but ulterior pieces, including table-lamps, that appear to be acid-etched hut can be identified as moulded on close inspection
• COLLECTING monumental vases in “electric” colours
with deeply acid-etched decoration are preferred; metal armatures are often cracked and should be inspected
carefully;depth, quality,and complexity of decoration Lire vital for determining value – vessels with shallow, sparse decoration tend to be of later origin and have little value; pale colours and a smoky grey are indicative of later origin (possibly post-World War II)
Maurice Marinot
• TYPES handmade, small-scale items with heavy, thick-walled glass arc most typical; much of Marinot’s work is internally decorated or enamelled
• COLLECTING work is rare and consequently expensive
Marks
All pieces are engraved with the Marinot signature
Other French makers
ARGY-ROUSSEAU AND DECORCHEMONT
The style of the pate-de-verre (glass paste) specialists Gabriel Argy-Rousseau (1885-1953) and Francois-Emile Decorchemont (1880-1971) evolved from the Art Nouveau to the Art Deco during the 1920s. Argy-Rousseau produced vases decorated with stylized figures or geometric patterns in rich colours, together with table-lamps (the most valuable of all Art Deco pate-de-verre), plaques, and some translucent pate-de-cristal vessels. Popular Argy-Rousseau Vases were produced in large numbers, each one being hand-finished; motifs included Egyptian and mythological subjects. The output of Decorchemont, whose work is less collectable than that of Argy-Rousseau, is mainly in pate-de-cristal, often of bluish tone. Small vessels of Neo-classical form are typical. External decoration is subtle, and may be in the form of geometric engraving.
GOUPY AND HEILIGENSTEIN
Working from his Paris studio between 1918 and c.1936, Marcel Goupy (1886-1954) designed glass and ceramics sold mostly through the gallery of Georges Rouard in Paris. Goupy glass includes thin-walled vases, decanters, and goblets in clear or pale monochrome glass, painted with stylized flora, fauna, or figural decoration in semi-matt polychrome enamels. Auguste-Claude Heiligenstein (1891-1976) was an assistant to Goupy at Rouard from 1919 until 1926; he produced enamelled glass for several firms and independent commissions until the mid-1930s. Heiligenstein specialized in figural decoration, often featuring Neo-classical women in translucent enamels. Colours are naturalistic, often predominantly bluish and sometimes edged in gilt. Forms include vases, decanters, and pendants.
Other French Art Deco glass artists who used enamel decoration include Andre Delatte, who worked near Nancy in the 1920s and made mostly vases in opaque, bright colours. In his best pieces the decoration combines etching overlay with polychrome enamel painting. The firm of Muller Freres (est. 1895) in Luneville made speckled glass comparable to Daum c.1930, which may be fixed with metal armatures. The most valuable glass of this type was used for a series of lamps in the form of animals.
LESSER-KNOWN MAKERS
French Art Deco glass by small or lesser-known makers is widely available and varies greatly in quality. The unique, deeply acid-etched sculptural work of Aristide Colotte (1885-1959) in clear crystal ranks among the highest achievements in Art Deco decorative glass, but not widely collected. Similarly, the strikingly Modernists geometric glass desk items designed by Jean Luce (1895-1964) arc not greatly sought after, despite the practicality. Luce also designed glass for the ocean liners of the Compagnie Generale Transatlantique
(C.G.T.). Other Art Deco glass includes the
popular range of vases, lamps, and other wares
produced by Charles Schneider (1881-1953) from
c.1918 until the early 1930s. Most is of mottled.
bubbly glass mould-blown into heavily walled
vases and bowls. Vessels of this type, which may have applied feet or handles of contrasting colour, are common and of relatively little value. Schneider produced vases and a few table-lamps as “Lc Verre Francais”, typically in overlay glass etched with Art Deco decoration.
Argy-Rousseau and Decorchement
• WARES before c.1920: mostly small, Art Nouveau pieces, including jewellery and ashtrays; after c. 1920: larger items, including vases, in a more symmetrical style
• CONVERSIONS attention should be paid to large vases,
which may have been drilled for lamp attachments
• RESTORATION this may be visible on heavy, opaque pieces through transmitted light, and reduces value
• COLLECTING rich, deep colours and well-defined decoration are most desirable; heavier vases are popular
Goupy and Heiligenstein
• DECORATION polychrome enamelling
• COLLECTING Goupy: large-scale works and figural work are his most collectable pieces
Marks
Goupy: enamel or gilt script in the design or on underside of foot; Heiligenstein: most have an enamel or gilt signature, dates, and title of decoration
Lesser-known makers
• COLLECTING Luce: desk items arc popular with Art Deco collectors; Schneider: mould-blown vessels are common and of relatively little value; large pieces, geometric forms, lamps, and pieces with applied elements are the more valuable Schneider wares

Most American glass made during the inter-war years was in traditional style and of press-moulded manufacture, but inexpensive interpretations of French glass, particularly that of Rene Lalique (1860-1945), were popular during the early 1930x. American glass of this period is rarely found outside the USA, as it was not exported; a thriving network of American-glass collectors exists, but there is virtually no interest in this type of Art Deco glass elsewhere in the world.
STEUBEN GLASS
Steuben Glassworks (est. 1903) was founded in Corning, New York, by the Englishman Frederick Carder (1864-1963). Steuben is the most prestigious and highly regarded American glassmaker, partly owing to its elegant and distinctive work in the Art Deco style.
Before 1933 Carder designed much of Steuben’s ware himself; after that date most Steuben Art Deco glass was designed by John Monteith Gates (6.1905) or
Sidney Waugh (1904-63), who worked almost exclusively in clear crystal. Steuben glass is not Modernist or avant-garde; vase forms are typically restrained, often of Neo-classical or Chinese inspiration. Engraved decoration is impressive, comparable to that of contemporary glass made by the Swedish firm of Orrefors (est. 1898). Much of the engraving is figural, featuring slender forms with subtle, geometric stylization. During the late 1930s and 1940s Steuben also produced a range of heavy, cast, clear crystal animals, some in geometric Art Deco designs, for use as bookends and paperweights; these are highly collectable today. Decanters, often with air-trapped stoppers, are also common.
Stemware, bar items, and a few elegant vases designed for Steuben by the leading industrial designer Walter Dorwin Teague ( 1883-1960) in the early 1930s are considered among the most innovative American Art Deco glass. Teague’s slender, elegant Art Deco cocktail and wineglasses are comparable in value to the best Lalique pieces.
VERLYS AND CACIQUE-STYLE GLASS
The trademark “Verlys” derives from “Venetic d’Andelys”, a French glassworks (est. 1920) in Les Andelys, Lure, founded by the American Holophane Glass Co. However, from c.1933 until 1955 most decorative Verlys wares were made in the USA, and pieces are often found on the market there today. Verlys ware is growing in popularity in the USA and also has some market in Europe. Typical of the factory’s output arc press-moulded vases and bowls, mostly with symmetrical patterns evocative of Lalique, in deep-bluish Opalescent glass. Smoky-grey, blue, and pink are rare and generally less popular; even the best designs have values comparable only to those of the plainest Lalique. From 1926 the Consolidated Lamp & Glass Co. of
Coraopolis, Pennsylvania, produced an inexpensive range of mould-blown vases and some figural plates in the style of Lalique under the direction of Reuben Haley. Production continued on the same site – trading as the Phoenix Glassworks – until the 1940s, under Reuben’s son, Kenneth Haley.
“RUBA RHOMBIC” AND DEPRESSION GLASS Between 1928 and 1933 the Consolidated Lamp & Glass Co. produced a stylish line of vases and table glass called “Ruba Rhombic”. Examples are highly collectable, although the line was relatively inexpensive when first produced. Liqueur sets and small vases in smoky grey are most common. Collectors focus on vibrant or rare colours such as green, yellow, lavender, and black. It is estimated that fewer than 1,500 pieces exist today.
Ruba Rhombic is the finest of the so-called “Depression” glass that was produced by scores of regional firms, and consisted mostly of heavily moulded kitchen- or tableware in pale monochrome, sometimes in the Art Deco style. Depression glass is collectable in the USA but remains very affordable.
Steuben Glassworks
• FORMS Neo-classical or Chinese-style vases, clear crystal animals,decanters with air-trapped stoppers; Art Deco stemware, vases, and barware by Teague
• ORNAMENT engraved, stylized figures or fauna
• COLLECTING elegant Art Deco cocktail and wineglasses are most valuable
Verlys
• FORMS press-moulded vases and bowls, with Lalique style symmetrical patterns
• COLLECTING becoming increasingly popular; opalescent colours are more desirable than smoky grey, blue, or pink
Phoenix Glassworks
• STYLE some copies of, or attempts to emulate, Lalique are found, but they can be distinguished by their light weight, poor definition, poorly finished rims, sugary frosted texture, and use of matt, pastel staining, sometimes in two colours
• COLLECTING as yet of no significant value

Ruba Rhombic glass
• FORMS angular, heavily moulded vases and tableware, mostly= pale monochrome
• COLLECTING angular “Ruba Rhombic” pieces in vibrant or rare colours such as green, yellow, lavender, and black are most desirable

Art DecoCeramics
In the 1920s and 1930s the Art Deco style filtered through into the designs of commercial ceramics manufacturers throughout Europe. Factories such as Sevres in France employed top designers to create fashionable pieces with such typical Art Deco motifs as stylized flowers, plants, female nudes, and exotic animals in bold colours. Commercially produced pieces survive
in larger numbers than those of artist-potters and are becomin with Geometric shapes an increasingly popular with collectors.
clean, functional forms were a legacy of the Bauhaus 1 Germany, being eminently suitable for mass production. British ceramics remained essentially traditional, but bold, bright Art Deco designs were produced by Clarice Cliff.
FRENCH ART POTTERY
Immediately prior to and following World War I, many potters continued to work in the tradition of the reform movements of the 19th century, in which the artisan was responsible for all phases of the production of his or her work. Most of these artist-potters were based in France and explored a wide variety of techniques, including
painting, sgraffito and crackle glazing. Many of them employed the typical Art Deco motifs of stylized female figures and animals, often representing episodes from Classical myths, or geometric forms.
An influential forerunner of the artist-potters was Andre Metthey (1871-1921), who produced richly coloured faience and stoneware vases with decoration designed by such well-known avant-garde artists as Henri Matisse, Andre Derain, and Edouard Vuillard. After World War I Metthey turned to painting his wares with pure geometric motifs of his own design, as well as stylized flowers, plants, and Classical figures in bright colours, usually in friezes or set in medallions.
In the early 20th century many French potters were strongly influenced by Oriental ceramics. Among these was Raoul Lachenal (1855–c.1930), who produced simple, symmetrical stonewares inspired by Oriental forms and painted with stylized floral or geometric patterns in strong, plain colours. Henri Simmen (18801969) was greatly interested in French peasant pottery, and worked with salt and flambe glazes before World War I. After the war he produced handmade stonewares, using natural products to create rich glazes. Simmen’s wares were sometimes incised with symmetrically placed
geometric motifs; ivory, precious wood, or horn lids, finials, and stands were carved by his Japanese wife, O’Kin Simmen. The early designs of Emile Decoeur (18761953) were in the Art Nouveau style, but in the 1920s and 1930s he rejected elaborate surface decoration in favour of pure, symmetrical, Oriental-style forms with a single, brilliantly coloured glaze.
One of the best-known figures in Art Deco French ceramics was Rene Buthaud (1886-1987), whose work is rare and highly collectable. In the mid-1920s he produced simple, bulbous vases and bowls with painted, crackle-glazed, or incised decoration, generally in brown tones. His designs of linear, stylized female figures were influenced by the paintings of Jean Dupas and by African art. Buthaud was among the artists who designed wares for Primavera, the design studio of the Printemps department store in Paris. The Longwy factory also produced wares for Primavera, including pieces with crackle-glazed grounds, which were used as a base for painted decoration.
The painter Jean Mayodon (1893-1967) turned to working in ceramics in 1912 but did not exhibit his pieces until after the war. His vases, bowls, and plates are painted in rich colours and decorated with Classical figures. As well as small decorative pieces, Mayodon produced panels and tiles, some of which were used for the French ocean liners of the 1930s. The French painter Raoul Dufy (1877-1953) collaborated with the Catalan potter Josep Llorens Artigas (1892-1980) on ceramic vases, fountains, and planters decorated with Duty’s trademark motifs of dancers, flowers, and nymphs.
COMMERCIAL WARES
Some of the highest-quality Art Deco ceramics were produced at Sevres from 1920, when the factory came under the direction of George Lechevallier-Chevignard. At the 1925 Paris Exhibition, Sevres displayed vases and tablewares with decorations designed by a number of eminent contemporary artists, including Suzanne Lalique (b.1899), daughter of the jeweller and glassmaker Rene Lalique 1860-1945), Jacques-Emile Ruhlmann
933), and the painter Jean Dupas (1882-1964). These wares were traditional in form but were elaborately embellished with Art Deco motifs. The restrained use of gilding to highlight or outline motifs is also a familiar feature of Sevres wares.
The Limoges firm of Theodore Haviland & Cie (est. 1-9–) also employed Suzanne Lalique and Duty and consequently produced pieces similar to those of Sevres. Lalique designed plates depicting grapes and vines in a palette of black, silver, and green, while Dufy’s wares featured foliage and floral motifs in bright colours. Tableware for Haviland by the glass designer Jean Luce 1895-1964) is characterized by gold-and-platinum stylized clouds, angular sunbursts, and zigzags.
In the 1920s and 1930s the design studios of Parisian department stores produced a wide variety of Art Deco wares for the mass market. La Maitrise, the studio of Galeries es Lafayette, produced a range of household wares manufactured in Belgium. The Compagnie des Arts Francais (est. 1919) produced a variety of utilitarian and decorative wares in an architectonic style, as well as tablewares such as tureens and vegetable dishes with heavy scrolls and floral motifs.
The most important manufacturer of Belgian Art Deco ceramics was the firm of Keramis, owned by Boch Freres, in La Louvriere. Its artistic director from 1907
was Charles Catteau (1880-1966), who designed simple, ovoid-shaped vases, with thickly applied glazes on an often ivory, crackle-glazed background. Like Lachenal, Catteau sometimes used patterns imitating cloisonne enamel, although in the 1920s and 1930s his favoured forms of decoration included Such animals as leaping gazelles and stylized pendant flowers and plants.
In Italy the architect Gio Ponti (18911979) created a range of wares between 1923 and 1930 for the porcelain manufacturers Richard-Ginori (est. 1896) in Doccia. His range included tableware, vases, and urns, which were painted with strongly stylized geometric patterns, architectural forms,
figures, or drapery.
FIGURES
Most French figurative ceramics reflect the general trend for stylized forms. Among the earliest Art Deco examples are the porcelain tea- and coffee-sets (1916-17) designed by the Swiss sculptor Edouard Marcel Sandoz (1881-1971) for Haviland. The teapots, creamers, and other items are modelled as formalized, angular animals and birds. The Parisian firm of Robj produced useful wares in the form of brightly coloured, almost toylike figures in national dress or representing different professions.
From 1928 the Italian firm of Lenci (est. 1919) in Turin produced earthenware and porcelain figures, mainly of women, either nude or in contemporary dress. These figures are more naturalistic than most French examples and are distinguished by elongated limbs, bright-yellow hair, and a combination of matt and glossy glazes. Most Lenci designers are anonymous.
French art pottery
• DECORATION sgraffito, painting, and crackle glazing
• INSPIRATION Classical and Oriental wares
Marks
Buthaud: painted “R. Buthaud”, or painted or incised monogram “RB”
Primavera: Dufy/Artigas: each piece w0.V
should be individually numbered (1-110) C)
Sevres
• STYLE conventional forms based on 18th-century designs are typically decorated with stylized leaves and flowers, and geometric patterns; gilding is common
• COLLECTING pieces are high quality so are relatively expensive even though mass-produced
Keramis/Boch Freres
• FORMS simple, ovoid shapes
• DECORATION patterns imitating cloisonne enamel; stylized flowers, plants, or animals; colours: turquoise, also blue, black, green, and brown
France
• FORMS useful wares such as tea- and coffee-services and decanters, as well as decorative pieces, made in the form of stylized animals, birds, or human figures
Lenci
• FORMS figures of women, nude or in stylish modern dress, often wearing hats; mostly single subjects
• GLAZES matt often combined with shiny finish
• COLLECTING sophisticated pieces most sought after
COMMERCIAL WARES
In Germany, the Bauhaus (est. 1919) opened a ceramics workshop at Dornburg near Weimar, but ceramics were abandoned when the school moved to Dessau in 1925. However, the pure, functional forms used by Bauhaus designers did have some influence on mass-produced ceramics. In 1930, at the State Porcelain Factory in Berlin, Marguerite Friedlander-Wildenhaim (1896-1985), a former Bauhaus student, created the simple, geometric designs of the “Halle” service. Geometric shapes, with soft, rounded contours, were also used by Dr Hermann Gretsch for his designs for the “Arzberg 1382″ service of 1931, which was manufactured by the Carl Schumann factory in Arzberg.
Among the factory’s most collectable products today are its terracotta wall masks. These elongated, highly stylized female faces are hand-painted in bold colours, typically red, yellow, green, and black, and usually have
brightly coloured hair in ringlets. The firm also had a subsidiary in Paris, which at the 1925 exhibition displayed Cubist-inspired, angular statuettes with simplified features. In the late 1930s the British firm of Myott, Son & Co. Ltd produced Goldscheider figures. These pieces, clearly marked with their origin, are less collectable than Goldscheider figures made in Austria.
In Germany, fine-quality, detailed, naturalistic porcelain figures of dancers in colourful costumes, women in modern dress, and animals were produced by the firm of Rosenthal (est. 1879) in Selb. However, some of its most distinctive figures of the late 1920s and 1930s are very different in style; modelled by the artist Gerhard Schliepstein (b.1886) they depict svelte, elongated, and stylized women and greyhounds in pure-white porcelain. The Art Deco taste for the exotic was reflected in the figures of snake-charmers, Spanish dancers, and belly-dancers made by the Dux porcelain factory in Bohemia in the 1920s and 1930s.
Among the most distinctive Art Deco ceramics are those designed by Wilhelm Kage (1889-1950), artistic director of the Gustavsberg porcelain works in Sweden. His “Argenta” range of hand-thrown or moulded green-glazed vases, bowls, plates, and boxes (1929-52) is inset with chased silver in typically Art Deco motifs of mermaids, nude female figures, and flowers. Such wares are becoming more popular with collectors but are still relatively inexpensive.
FIGURES
Along with tableware, figures are among the most widely collected Art Deco ceramics today. While some factories continued to produce figures of traditional subjects, such as characters from the Italian commedia dell’arte, many Art Deco figures represent women, either nude or in contemporary dress. Some are accompanied by elegant greyhounds or borzois. Stylized human, animal, or bird figures and wall masks, influenced by contemporary Cubist abstract sculpture, were also popular during this period.
During the 1920s and 1930s the Vienna firm of Goldscheider (1885-1954) was one of the few Austrian producers of earthenware and porcelain in the Modern style. Figures made by Goldscheider include dancing couples in contemporary dress, ballerinas, and Pierrettes from the commedia dell’arte. Colours are typically rich and contrasting, and costumes are exotic.
German commercial waresSTYLE
• , usually influenced by the Bauhaus designs; simple, geometric shapes are typical, often with soft, round contours
Gustaysberg porcelain works
• STYLE Argenta tablewares, vases, and boxes with green-glazed grounds, inset with chased silver motifs; some with diaper-patterned or floral borders
• COLLECTING Argenta wares are increasingly collectable; hand-thrown pieces are more heavily moulded
Marks
Printed in black or gold ( 1910-40) 19
Goldscheider
• FORMS figures of couples in modern dress, dancers, and stylized wall masks
• COLOURS wall masks are painted in bright tones of red, yellow, green, and black
• CONDITION masks are prone to chipping as they are made of earthenware; paint may also be worn
American Art Deco ceramics were mainly inspired by European design, and today many collectors in the USA actually prefer French Art Deco porcelain or pottery to American-made pieces.
COMMERCIAL CERAMICS
Cleveland, Ohio, was the centre for progressive American ceramics during the inter-war years, owing to the influence of Julius Mihalik, a Viennese professor at the Cleveland Institute of Arts and follower of the Wiener Werkstatte. Several students and independent designers worked for the Cowan Pottery, founded outside Cleveland in 1913 by Reginald Guy Cowan 3. 19 30). Cowan designed most of the pottery’s early pieces himself; these consist mainly of inexpensive, slip-cast earthenware figures and figural “flower frogs” with matt monochrome glazes. The work of independent designers, generally made after 1927 for the Cowan Pottery Studio, was often issued in limited editions, and is most collectable. Some pieces show a distinctly Austrian influence, while others, particularly the work of Paul A “Jazz” punchbowl by Victor Schreckengost for the Cowan Pottery Studio
-,-is well-known design depicts scenes of New York City on New Year’s
and is glazed in “Egyptian Blue”. Each piece in the rare limited edition of 50 is slightly different A commercial, mass-produced edition also exists. (1931; ht 20cm18in; value of limited-edition bowl K)
Manship (1885-1966), are sculptural. The designs of Waylande Gregory (1905-71), who worked at Cowan from 1928 and later at the Cranbrook Academy of Art in Bloomfield Hills, near Detroit, Michigan, are often Neo-classical in inspiration.
A famous allegorical image, “Radio”, personifies the medium as a woman depicted in the Classical style, holding a lightning bolt.
The Rookwood Pottery (est. 1880) of Cincinnati, Ohio, produced an extensive range of Art Deco ceramics, mostly figures, bookends, and paperweights, in monochrome glazes. The Art Deco wares of the Roseville Pottery, in Zanesville, Ohio, are generally considered inferior to those of Rookwood, but such lines as “Futura”, introduced in 1928, are lively and attractive, which
makes them of greater interest to collectors. Most common in this line are well-marked vases featuring angular handles or “skyscraper” stepping.
In 1936 Frederick Hurten Rhead (1880-1942) introduced the “Fiesta” line for the Homer Laughlin China Co. (est. 1877) in East Liverpool, Ohio. This was a popular kitchenware in vibrant colours. Collectors are widespread, and Fiesta is sold at special auctions throughout North America. Comparable to Fiesta ware are the monochrome teapots and dinnerware in streamlined style made at the Hall China Co. (est. 1903) in East Liverpool; like the Fiesta range, these have been authentically reproduced.
STUDIO POTTERY
Studio potters active in the inter-war years in the USA include Susi Singer (1895-1949) and Vally Wieseltheir (1895-1945), who were both potters at the Wiener Werks6tte before emigrating in 1932. Typical . pica] of their work are hand-modelled earthenware figures, most of which are clearly signed. Wieseltheir produced designs for General Ceramics in New York. From 1923 to the early 1930s the designer Wilhelm Hunt Diederich (1884-1953) made a limited amount of pottery, rare and now highly sought after, at his studios in Woodstock, New York. Other potters of note include Henry Varnum Poor (1888-1971), Carl Walters, and Maija Grotell.
Cowan Pottery
• COLLECTING Cowan Pottery Studio is the most collectable commercial ware; pieces by independent designers after 1927 (especially limited-edition “Jazz” bowls) are more collectable than early
pieces
Marks
Most pieces are impressed or printed with marks showing artist’s name or monogram
Other commercial ceramics
• ROOKWOOD Art Deco pieces are less collectable and valuable than pre-1914 pieces, although colourful, abstract-patterned vases are popular with collectors
• ROSEVILLE more collectable than Rookwood; “Futura” is most popular; beware of modern forgeries, which arc difficult to distinguish from originals
• FIESTA made until 1972 and reintroduced in 1986; widely collected in USA; early pieces include red (most desirable), blue, yellow, green, and ivory (least popular); most new colours are pastel; modern versions are widely available
Studio pottery
• TYPES various pieces, including polychrome, hand-modelled earthenware figures, and platters hand-painted with stylized figures and animals
• VALUE pieces by independent studio potters are higher in value than mass-produced ceramics
• COLLECTING wares arc generally signed by the artist; work by Hunt Diederich is rare and very collectable
Art Deco had little immediate impact on the forms of commercial British ceramics; most firms simply added the newly fashionable, brightly coloured, geometric, and abstract designs to existing shapes. By the late 1920s the success of such innovative designers as Clarice Cliff (1899-1972) encouraged others to develop original shapes alongside traditional ranges, and by the 1930s the influence of Modernism was evident in the increasingly functional and geometric forms of tableware, minimally decorated in neutral matt glazes. A whimsical trend in ceramics continued in the range of popular ornaments, from Wedgwood’s sculptural animal designs to porcelain figures embellishing such items as dressing-table wares.
CLARICE CLIFF
British Art Deco ceramics are virtually synonymous with Cliff. In 1916 she joined the firm of A.J. Wilkinson Ltd (est. 1896), near Burslem, Staffordshire. In 1920 the firm acquired the nearby Newport Pottery and its range of old-fashioned white wares, and, recognizing Cliff’s talent, set her up in a studio there. Cliff and her team of decorators hand-painted biscuit-fired tablewares with brightly coloured enamels over a distinctive ivory-coloured glaze, known as “honey” glaze. In January 1928 the “Bizarre” range of inexpensive and cheerful pottery for or everyday use was launched; by October of the same year the range had become hugely successful. Cliff went on to design more than 500 shapes, including the “Conical”, “Bonjour”, and “Stamford” ranges, and 2,000 patterns, including “Inspiration” (now rare and desirable), “Applique”, “Tennis”, “Sunray”, “Solitude”, and “Mountain”. As well as traditional shapes, she designed many futuristic or otherwise innovative forms,
such as beehive-shaped honey-pots, cone-shaped sugar-sifters, and highly stylized, geometric versions of conventional items. The majority of her output was tablewares, but she also produced a range of novelty wares, among the most collectable being figures and the newly fashionable wall masks, which usually depicted the subject face-on and featured a floral headdress. Cliff also commissioned designs from other artists, among them Laura Knight ( 1877-1970), who produced the now highly collectable “Circus” series.
SUSIE COOPER
Although somewhat overshadowed by Cliff’s bright, flamboyant designs, Susie Cooper (1902-95) designed an equally distinctive and now sought-after range of shapes (including “Kestrel”,
“Curlew”, “Wren”, “Jay”,
“Falcon”, and “Spiral”) and
patterns (including “Dresden
Spray”, “Tadpoles”, “Scarlet
runner beans”, “Nosegay” “Polka
dots”, and “Cromer”). In 1922 she
undertook a work placement with
A.E. Gray & Co. Ltd (1912-61) in
Hanley, Staffordshire, and her success
in designing surface patterns in lustre
pigments and enamel colours for bought-in
white wares was such that she was given her
own mark. By 1929 she had established a ceramic decoration company at George Street Pottery, Tunstall, and by 1932 was designing her own shapes; these were produced at Wood & Sons, in Burslem, Staffordshire, where Cooper had her own production unit, Crown Works. Most sought after are her tablewares in traditional, rounded shapes such as “Kestrel”, “Curlew”, and “Wren”. Other early and desirable ranges include the more brightly coloured, abstract, geometric designs such as the banded patterns, polka dots, and exclamation marks produced for the large retail outlets of the John Lewis Partnership in the early 1930s. Her hand-painted designs were carefully adapted for transfer-printing, and the two methods of decoration are virtually indistinguishable and equally collectable. After World War II Cooper produced light, translucent, bone-china teawares made in Longton and sent to Burslem for decoration; these are less collectable.
WEDGWOOD AND DOULTON
The commercial giants Wedgwood (est. 1759), in Burslem, Staffordshire, and Doulton & Co. (est. 1815), in London, both produced ranges of functional tablewares and purely decorative Art Deco pieces. For Wedgwood the Modernist architect Keith Murray (1892-1981) designed a range of simple, geometric forms, including vases and bowls, with lathe-turned decoration and semi-matt glazes, often in soft grey, green, and ivory white. In complete contrast to Murray’s plain, functional designs were Wedgwood’s more conventional, intricately decorated lustrewares, the most popular and expensive of which was the “Fairyland” series.
Although the imagery on the “Fairyland” pieces bears no resemblance to that usually associated with Art Deco, the original shapes and bright colours are typical of the period, and the success of Wedgwood’s lustrewares inspired other manufacturers to produce more strictly Art Deco lustre ranges. From 1926 the modeller and sculptor John Skeaping (1901-80) designed a range of 14 stylized Art Deco earthenware animals and birds for Wedgwood in black basalt, cream, celadon, and tan glazes; these pieces proved popular and were produced well into the 1950s.
Doulton produced a range of Art Deco tableware –such as the “Dubarry” dinner service – but it is the company’s decorative bone-china figures of the 1920s and 1930s, many designed by Lesley Harradine (1887-1965), that are particularly collectable
toda.
These figures, most of which are full length, usually depict young, fair-skinned women in informal poses, and as such are celebrations of women’s increasing freedom and independence.
OTHER FACTORIES
The Art Deco wares produced by the Shelley Pottery Ltd (1872-1966; originally Wileman & Co.; trading as Foley 1892-1925, and as Shelley from 1925) owe their continuing popularity at least in part to the talented designers employed by the company in the 1920s and 1930s. These include the illustrator Mabel Lucie Attwell (1879-1964), who in 1926 introduced a range of charming nursery wares. In 1930 Eric Slater (1).1902) introduced two new, Modernist forms – “Vogue” and “Mode” – in clean, streamlined, architectural shapes that were perfectly suited to Shelley’s fine bone china. However, more successful was the “Eve” range of
tablewares, introduced c.1932, combining practicality with stylish, geometric design; it featured cup rims narrowed to prevent heat loss, and
triangular handles pierced, rather than
solid, for easier handling.
The Poole Pottery in Dorset (est. 1873
as Carter & Co.; trading as Carter, Stabler
& Adams from 1921, and from 1963 as
Poole Pottery, the name now also used to
describe early wares) produced collectable
Art Deco tablewares during the 1930s. Designs include “Studland”, which has elaborate angular handles combined with a
plain body of mottled green or blue, or the fashionable leaf and floral pattern; “Picotee” and “Everest” in plain colours with solid diamond-shaped handles, and rounded and ribbed shapes respectively; and “Streamline”, which as the name suggests was influenced by the American streamlined style.
The Carlton Works at Stoke-on-Trent (est. 1890; from 1958 Carltonware Ltd) produced a distinctive range of ceramics during this period. Rare and highly sought after are their geometric-shaped vases, hand-painted in bright contrasting colours. The success of Wedgwood’s lustrewares inspired Carlton to produce a range of richly coloured pieces, featuring enamelled decoration
on a dark glaze and a pearlized effect on the interior. Most of the company’s production took the form of moulded tableware, with leaf-moulded dishes being especially common.
Clarice Cliff
• DESIGNS strong geometric forms in bold, bright colours; some traditional shapes
• BEWARE fakes proliferate: check for washed-out colour,
poor-quality painting, and an uneven or murky glaze
• COLLECING increasingly rare and expensive; pieces are collected by pattern or type; desirability is determined by pattern, shape, and condition; wall masks and “Age of Jazz” figures are highly sought after
Marks
Most pieces marked, with the pattern
name alongside the signature, and a 00″‘ stamped factory mark
Susie Cooper
• DESIGNS traditional, rounded forms; tea-sets usually in autumnal colours
• COLLECTING pre-1939 wares are most collectable; archive catalogues help to distinguish between pre-and post-war issues of the same designs; hand-painted, transfer-printed or lithographed designs
arc all equally collectable
Marks
Printed in brown on carthcnwares from c.1932
Major manufacturers
• DESIGNS Murray for Wedgwood: geometric, often ribbed pieces; Doulton figures: young women, typically bathing or dancing; Shelley: architectural forms with conical bodies and solid, triangular handles; Poole: streamlined shapes produced in combinations of subdued, two-colour glazes
• DECORATION Carlton: flowers, butterflies, chinoiserie, and silver-lustre lightning motifs are typical
• COLLECTING a wide range of tablewares is available; porcelain figures command premium prices;
Wedgwood: designs by Murray and Skeaping are highly sought after, particularly Murray’s lathe-turned wares, “Annular” teawares, and the “Bournvita” drinking set; Shelley: designs by Slater are highly desirable; Carlton: leaf-moulded forms are abundant but not popular with collectors
Marks
Poole Pottery: almost all pieces are impressed with this mark or the entwined initials “CSA” and will include the decorator’s monogram; few pieces are dated