Posts Tagged ‘fine bohemian china made in czechoslovakia’

WINE-GLASS, BLUE GLASS CASED OVER
GLASS, with ACID-ETCHED DECORATION
Benjamin Richardson, England, 1857
I It. 143 mm (563 in.)
Acid Etching: Although acid-etched glasses
arc known to exist from the 17th century,
the process was not generally used in glass-
making until the 19th century, with the
discovery of hydrofluoric acid. Heinrich
Schwanhardt (d.1693), son of the Nurem-
berg engraver Georg Schwanhardt, is
recorded to have engraved glasses with
acid, one example attributed to him being
dated 1686. The technique can be used
either to cut through one layer of glass to
another, as in the glass illustrated, or to
provide a single-layered glass with a matt
finish. An acid-resist such as wax paraffin
covers the parts that are not to be affected,
the pattern having been cut through the
resist. The surface of the glass is then
treated in an acid bath (such as a mixture
of 100 parts of water, 10 of potassium
fluoride and t part hydrochloric acid).
Benjamin Richardson of the Richardson
firm of Stourbridge took out a patent to
etch glasses in 1857.
VASE WITH ACID-ETCHED DECORATION
J. & J. Northwood, England, r.1878.
Ht. 216 mm (85 in.)
It was only in the 19th and 20th centuries
that acid-etching became at all an accepted
mode of decoration. In England it is
known that the Dudley firm of Thomas
Hawkes used the technique in the 1830’s.
Besides flat glass objects, wine-glasses,
bottles and vases were being acid-etched
by the 1840’s. John Northwood and T.
Guest were involved in the Richardson
experiments with acid-etching, and in the
186o’s established themselves as individual
firms specialising in etching. They were
known as J. 8c J. Northwood, and Guest
Brothers respectively, and produced a
quantity of etched work in the later 1860’s
and 1870V The skill and delicacy of the
etching they achieved can be seen on the
vase illustrated, made at the J. 8c J.
Northwood works and shown at the Paris
Exhibition of 1878. Acid-etching was by
no means a technique confined to England,
however.
The Techniques of’Taking Away
As Maurice Marinoi of Trance grew to
understand the nature and working of
glass, he experimented with its ornamen-
tation. In 1922 he began using the
technique of acid-etching in a manner
distinctly his own. The process had been
used by French glass-makers since the
mid-19th century. F.mile Galle, comment-
ing on the technique, had said that it would
not do for delicate work, but ‘it cuts into
certain glasses in a manner of its own’. He
used it in his factory from 1890 onwards,
and the Daum factory had also used it to
some extent. Marinot took up acid-etching
because it suited his purpose better than
any other decorative technique. When he
employed acid-etching he used the massi v e
forms he had always favoured, in trans-
parent, occasionally tinted, glass. The
etched designs cut deeply into the surface,
giving an almost sculptural look to the
glass. The whole surface of the glass was
subjected to the treatment, with the most
varied results.
Acid-etching has been used to give a matt
surface to the colourless glass vase illus-
trated. This slender vase has a round foot,
w ith a long stem widening slightly towards
the bowl, which is of an exaggerated tulip
shape. It is just one example of the beaut]
of modern Swedish glass. Even such an
aesthetically difficult technique as etching
has been triumphantly used to give .1
beautiful all-over textural and eye-catch-
ing finish. It has been said that ‘Sweden’s
great contribution to modern design was
to transform Functionalism from an in-
tellectual theory into a practical instru-
ment for better living’ (Polak, 1962). This
was eminently shown in her glass-making;
but besides qualities like fitness for prac-
tical purpose, toughness in wear and
cheapness of production, the general aim
from the beginning was to create objects
of beauty. The Swedes succeeded in their
glassware perhaps more than in any other
branch of modern design.
ENGRAVED AND SAND-BLASTED VASE
Hy Sverre FtTterscn, Hadeland, Norway, 1038
Sand-blasling: In the process of sand-
blasting a stream of sand, crushed flint or
powdered iron is directed on to the surface
of the glass in a jet of air. The parts of the
glass to be left plain are covered with a
stencil plate of steel, or an elastic varnish
or rubber solution painted on to form a
protective shield. The type of finish is
varied by altering the size of the nozzle, or
the abrasive, or the air pressure. The
technique has been in use since 1870,
though it has rarely been applied to vessel
glass, except for lettering on mass-pro-
duced items, and is mainly used on glass
panels for decorative architectural use.
One of the more successful uses of sand-
blasting on vessel glass was by Sverre
Pettersen of Norway (1884-1959), who
was engaged as designer to Hadelands
Cilasswerk in 1928—at that time the only
factory for table glass and decorative glass
in Norway. During the ‘thirties he pro-
duced some very interesting pieces with
sand-blasted decoration.
PLATE WITH SAND-BLASTED ENGRAVING
By I adislav Oliva, Czechoslovakia, 1959
Diam. 362 mm (1425 in,)
Such are the difficulties attached to using
sand-blasting for anything but the heaviest
surface decoration that only very occasion-
ally are satisfying examples of the tech-
nique to be found. One of the exceptions is
this plate, designed and executed by
Ladislav Oliva (b. 1933) in Czechoslovakia.
The plate, in clear colourless lead crystal
glass, has a slightly raised rim, and the
grille-like decoration is in the form of cuts
about to mm (4/ioths in.) deep. Oliva
manages through this technique to give
the glass a new and exciting appearance.
His decorative themes always seem to
result from the natural lights of the heavy
glass mass. The matt finish that sand-
blasting imports to the glass can be very
pleasant to the touch, although sometimes
it can give a fairly rough effect.
The  century has been called the ‘golden
age of glass”, for it added many new tech-
niques to the glass-maker’s repertoire. This
sudden burst of activity can be put down to
many factors, including ‘the industrial revo-
lution, the relaxation of government controls
on the industry (specifically in England) and
a pride of craftsmanship born of freedom’
I Revi, i<)5g). Not since the Italian Renais-
sance had there been such an interest in new
glass-making ideas. In America the larger
firms hired scientists to discover new methods
of colouring glass, one of the best-known
being the Englishman Joseph I^ocke. In
Britain and on the Continent there was keen
rivalry in producing new types of art glass
for a highly competitive market. Demand
rem lied its zenith towards the end of the
I ii torian era. Since then, though new
techniques have still greatly interested glass-
makers, the art glass produced has reflected
the inherent qualities of the material, rather
than added decorative effects.
Pearl Satinglass, also known as Pearl Ware,
Mother-of-Pearl Satinglass and Verre de
Soie, can be found in a variety of patterns
and colours, but basically it shows the
technique of keeping a symmetrical or
controlled pattern of air traps within the
body of a vessel. The vase illustrated shows
a typical example in the so-called hobnail
pattern. Benjamin Richardson of England
filed the first patent for this technique in
1857. His method was quite simple. A
gather of glass was blown into a mould
which carried the pattern in projected
form. The piece, thus indented, was
covered by a further gather of glass, which
caused air traps to form over the pattern.
Another method current in England and
America in the late 19th century was to line
a heated mould with glass tubes, either
clear and colourless or coloured, and to
blow a bubble of glass into this mould.
BOWL OPAQUE IVORI
COLOURED GLASS CASED WITH A P.AIJi RUBY OUTER
LAYER
Stevens & Williams, England, about 1885
lit. 140 mm (55 in.)
The tubes would thus be caught up and
marvered into the body of the glass. By
twisting the paraison the worker produced
articles of glass with pearly swirled stripes
on the outer surface. This method was
probably used to produce the body of the
bowl illustrated, which has been further
worked to form a frilly rim, and has the
heavy applied decoration current around
1885, Patents to produce Pearl Satinglass
were filed by firms in New York in 1881
and France in 1885. The Mt. Washington
Glass Company of the U.S.A. filed patents
in 1886, which also suggested using heat-
sensitive metal to colour the glass, and
giving the article a lustreless finish by
using an acid bath, or by sand-blasting.
The Phoenix Glass Company of Pennsyl-
vania filed patents in 1886, 1887 and 1888;
the final patent described the use of two
moulds, one to pattern the inner wall of
the article, the other to be used after the
outer casing of glass had been applied.
FAIRY LAMP IN PEARL SATINGLASS, RAINBOW STRIPED
IN BLUE, ROSE, YELLOW AND APRICOT
About 1885. lit. 152 mm (6 in.)
The finished product made by the tech-
nique last described displayed a criss-
crossed network of pearly-indented lines
contained in the body of the article.
William Webb Boulton, who had the
Audnam Bank glass-house in England,
filed a patent for Pearl Satin Glass in 1885.
Other English glass-houses manufactured
this type of glass, notably Stevens &
Williams of Brierley Hill, who called it
‘Verre de Soie\ Much of the Pearl Satin-
glass produced in the late 19th century
came from Bohemian and French factories.
These cheaper wares, supplied by factories
at Steinschonau and Altrohlau, Bohemia,
effectively ruined the market for the finer
wares of England and America. Many
different means were used to colour Pearl
Satinglass. The rainbow striping suggested
in this fairy lamp was produced by laying
coloured rods of glass on the body of the
article before it was fully formed.
VASE IN PEARL SATINGLASS
Thomas Webb & Sons, England, probably early
iSoo’s. Hi. 260 mm (1025 in.)
The technical development of trapping air
in moulded recesses between an opaque-
glass body and a tinted layer was further
refined by Thomas Webb & Sons of
England. In the magnificent example
illustrated the vase has a diamond air-lock
pattern between opaque and translucent
layers of glass, but has been covered by an
outer layer etched away to form a floral
pattern in relief; the whole article has a
satin finish. In 1889 Thomas Webb
patented this process for manufacturing
cameo relief designs on articles of Pearl
Satin Ware. After the diamond air lock
pattern had been produced in the usual
way, an extra coating of opaque white or
coloured glass was applied. The design
was painted on to this coating with acid-
resisting inks; when the article was plunged
into an acid bath, the acid dissolved away
all glass not protected by the resist. The
glass-maker had to be extremely careful
not ti) leave the object in the acid too long,
lest the acid reached the air traps.
FOOTED VASE, WITH CORAIE1NE DECOR AI ION
Last quarter of iqih century. 111. 127 mm (j in.)
Corulene: ‘The vase illustrated displays a
type of decoration that became popular
from its introduction in the last quarter of
the 19th century and is known as
‘Coralcne’. A design was painted in enamel
on the surface of a glass. Tiny glass beads,
which could be clear, coloured or opales-
cent, were then applied and stuck to the
enamel paint of the design. The object was
next put into a muffle-kiln, where the
enamel and beads were fired firmly into
place. Decoration could be in the shape of
coral, but is also seen in fleur-de-lis,
herringbone, sheaf of wheat and many-
other patterns. This type of decoration is
found in all colours and on all types of
glassware. Coralenc was so named by the
Mt. Washington Glass Company in the
U.S.A., and by several Continental and
English glass manufacturers. Its use was
not restricted to any one factory.
Amberina is generally recognised as a
clear amber glass shading to red at the top.
The patent for it, dated July 24, 1883, was
granted to Joseph Locke of the Libbey
Glass Company. This remarkable man was
born in Worcester, Kngland, in 1846 and
worked first as a potter. Guest Brothers of
Stourbridge, etchers and decorators of
glass, engaged him, but later he was
persuaded to join the firm of Hodgetts,
Richardson & Company, where he pro-
duced his copy of the Portland vase. After
various employments, Locke finally went
to America in 1882, where he was signed
on by the New Kngland Glass Company
of Cambridge, Mass., later to become the
Libbey Glass Company of Toledo, Ohio.
‘Amberina’, ‘Pomona’, and ‘Agata’ glass
are only a few of his achievements while in
their employment. Amberina was the first
patented method for producing shaded
and parti-coloured glassware from a sen-
sitive homogeneous metal.
To produce Amberina a very small amount
of gold in solution was colloidally dis-
persed in a transparent amber glass metal.
When an object had been made from this
mix, it was allowed to cool below a glowing
red heat and then certain parts were re-
heated at the ‘glory hole’ (a small opening
in the furnace). This caused a red colour to
strike in the reheated portions—but over-
firing caused a fuchsia or purple shading.
Further patents were issued either to
Locke or to Kdward D. Libbey. An
interesting development was the produc-
tion of blanks composed of sensitive
Amberina glass which, after moulding,
were reheated to produce a deep ruby
colour on the outer surface only. A design
would be cut through to the undeveloped
amber colour below, giving a rich effect.
Amberina was made in Cambridge, Mass.,
between 1883 and 1888 by the New
Kngland Glass Company. A fine though
short-lived revival was made between 1917
and 1920, when the firm had moved to
Toledo, Ohio; one of its products is
shown above.
New England Glass Company, U.S.A., 1886
Ht. 178 mm (7 in.)
Almost every glass company in Europe and
America probably made Amberina at some
time during this period. A new technique
was patented for the New England Glass
Company in 1883 and was called ‘Plated
Amberina’; this was unique to that firm.
A piece of opal or opalescent glass plated
with a gold-ruby mixture was reheated at
the ‘glory hole’, so that it would develop
deeper and lighter shadings on its outer
surface. When Amberina metal was used,
the shading would of course be amber-to-
red. However, other colours could be
made: a sensitive cobalt and ruby glass
mixture would produce a plated ware
shading from blue to ruby. Canary, blue
and green colours were also mentioned in
the patent. Plated Amberina invariably has
moulded ribbed decoration, as in the
example shown, though this had no par-
ticular bearing on the specifications men-
tioned in the patent. It was manufactured
only from 1883 to 1886.
PARFA1T oi.ass in rose amber glass
Ml Washington Glass Company, U.S.A., 1886
Ht. 127 mm (5 in.)
The Mt. Washington Glass Company,
New Bedford, Mass., attempted more or
less successfully to produce its own
Amberina glass under the name ‘Rose
Amber’. This was in every way similar to
Locke’s Amberina. Needless to say, the
New England Glass Company had an
injunction granted in 1886 in their suit
against the Mt. Washington Glass Com-
pany for infringement of their patent.
The Circuit Court of the United States
forbade the New Bedford firm to produce
its Rose Amber wares. However, it did not
seem that this injunction had any effect.
The New Bedford Board of Trade Report
of 1889 describes the making of Amberina,
Rose Amber, by ‘two companies, of which
the Mt. Washington was one’, and de-
scribes how ‘it caught the popular fancy
and was all the rage for about two years’.
According to this report it was the success
of the Amberina glass that caused Mt.
Washington to go in for an opaque shaded
ware—Burmese glass.
AMBERINA GLASS
New England Glass Company, U.S.A., iS
iii. 121 mm (475 in.)
WINE-GLASS IN ALEXANDRITE GLASS
English, beginning of 2olh century
Ht. 114 mm (45 in.)
Quite a number of Amberina pieces were
pressed or press-moulded. This piece can
definitely be attributed to the New Eng-
land Glass Company, since it follows a
design sketch made by Joseph Locke in
1884 when he was head designer for the
Cambridge winks. I lobbs Brockunier &
Company of Wheeling, West Virginia,
were licensed to manufacture pressed
Amberina by the New England Glass
Company in 1886. Sowerby’s Ellison Glass
Works Ltd., Gateshead-on-Tyne, Eng-
land, were also licensed to produce pressed
Amberina in 1883. A transparent, homo-
geneous glass shading from pale amber to
a delicate rose tint was press-moulded by
the firm of CristalletICS de Baccarat of
France from 1916. Known as ‘Rose Teinte’,
or to collectors as ‘Baccarat’s Amberina’,
it was reintroduced in 1940 as a popular
item. Its delicate colours were a result of
using less gold salts in the glass, but its
similarity to the American Amberina and
Rose Amber is undisputed.
‘Alexandrite’ glass, a single-layer glass of
three blended colours, first appeared about
1900, and is reputed to have been made by
the two English firms of Thomas Webb &
Sons and Stevens & Williams. 11 started off
as an amber glass; a portion would be re-
heated to rose, and reheated again to blue
on the outer rim, producing an exception-
ally beautiful effect. It is found in plain as
well as patterned surfaces. Stevens &
Williams used a differing technique to
produce the same effect. They cased a body
glass of transparent amber with rose and
blue glass. The outer casings of blue and
rose were then cut away, to reveal the
yellow glass beneath. Kolo Moser, a glass
designer of Bohemia of the early 1900’s,
produced an amethyst transparent glass
which carries the mark ‘Alexandria, but
this one-colour ware should not be con-
fused with the work attributed earlier to
Webb and Stevens & Williams.
PITCHER IN RUBY GLASS WITH DEVELOPED
OPALESCENT DESIGN
I hi i ijih century. I It. 279 mm (11 in.)
Opalescent Glass: In the late 19th century
glasses with raised opalescent white de-
signs became very popular. A coloured
gather of glass was heavily coated with a
sensitive, clear colourless glass containing
bone ash and arsenic. This was blown into
a patterned mould to give it the raised
design. It was then cooled slightly and
reheated, the raised parts striking an
opalescent white, while the background
retained the original colour. Inexpensive
glassware in this technique was produced
by Hobbs Brockunier & Company of
Wheeling, West Virginia; Alexander J.
Beatty & Sons of Steubenville, Ohio;
Phillip Arbogast of Pittsburgh, Pennsyl-
vania ; John Bryce & Company of Pitts-
burgh ; King & Company of Pittsburgh;
and Doyle & Company of Pittsburgh, and
others. Thomas Davidson of George
Davidson & Company Ltd. the Teams
Glass Works, Gateshead-on-Tyne, Eng-
land, patented in 1889 a process for making
a pressed, shaded version, in which the
opalescence was either white or of the
same shade as the body metal.
VASE IN BURMESE GLASS
Ml. Washington Glass Company, U.S.A., 1885
Ht. 305 mm (12 in.)
‘Burmese’ glass is a single-layered glass
shading from opaque greenish-yellow to
deep pink at the top. It was developed by
the Mt. Washington Glass Company,
New Bedford, Mass. Frederick S. Shirley
patented his formula for Burmese in 1885
for the firm. He produced the glass by
adding small amounts of fluorspar, feldspar
and oxide of uranium to essentially the
same ingredients as used by Joseph Locke
to make his Amberina glass. The fluorspar
and feldspar gave the glass its translucency,
and the uranium oxide made the ordin-
arily translucent white glass melt a pale-
yellow in colour; the gold made the glass
sensitive to thermal changes so that when
reheated at the ‘glory hole’ it struck a
salmon pink colour, which shaded down
to the original yellow. A second reheating
caused the pink glass to revert back to its
yellow colour, a feature quite often seen
on the rim of a piece of Burmese glass.
Frederick Shirley’s formula for Burmese-
glass was patented in England in 1886.
Thomas Webb 8i Sons of Stourbridge,
England, purchased a licence to copy-
Burmese products as well as to produce
their own shapes and designs. Most ol t he-
English Burmese ware is acid-finished,
though Mt. Washington produced both
glossy and acid-finished Burmese ware.
Thomas Webb & Sons called their glass
‘Queen’s Burmese Ware’. The glass was
much used for the patent ‘fairy lights’ or
small individual candle shades so popular
in England and America in the late
‘eighties. Queen Victoria ordered a tea-set
in Burmese glass from the Mt. Washington
Glass Company, enamelled with what was
to become known as the ‘Queen’s’ design.
The ornamentation of Burmese ware was
often of a highly decorative order. Verses
by well-known poets, Egyptian scenes, and
bird and animal portrayals were included
in enamelled motifs. Occasionally, finely
wrought applied decoration w ould be used.
Peach Blow: When a ‘Peach Bloom’
coloured Chinese porcelain vase was sold
for $18,000 in 1886, this caused such a
sensation that products labelled ‘Peach
Bloom’ or —slightly changed ‘Peach
Blow’ attracted many sales. ‘The glaze on
the vase was described as being the colour
of ‘crushed strawberries’. The magic of
the name attracted the attention of manu-
facturers of coloured art glasses, who tried
to devise new types suitable for this name.
Hobbs Brockunicr & Company of Wheel-
ing, West Virginia, produced such a glass
and called it ‘Wheeling Peach Blow’.
Replicas of the ‘Morgan’ vase were made,
like the example illustrated, in both glossy
and acid finishes. The moulded Stand with
its five-headed griffin is in an unimportant-
quality amber glass, hut the vase itself is
made of white opal glass plated with 1
transparent amber glass, made heat-sensi-
tive with gold salts. Reheating caused the
glass to strike a ruby colour, shading to
yellow or amber.
The Mt. Washington Glass Company
filed trade-name papers on the terms
‘Peach Blow’ and ‘Peach Skin’ through
Frederick S. Shirley in 1886. As a
colourant for their new products Shirley
substituted a small amount of cobalt or
copper oxide, instead of oxide of uranium
as in making Burmese. This produced a
homogeneous glass shaded pale grey-blue
to a delicate rose tint in the reheated
portions. When plunged in acid the surface
acquired an all-over slightly grey cast. As
it is a single-layered glass, the shading is
the same on the inside as on the exterior.
The Mt. Washington Peach Blow wares
were manufactured in similar shapes to
their Burmese ware. Moulded and applied
decoration were used, as well as gilding
and enamelling. The example illustrated
shows the ‘Queen’s’ design, as ordered by
Queen Victoria from the firm. The pattern
is of conventionalised flowers in raised
enamel, much of the decoration done in
pure gold reduced with acids.
The success of its Amberina glasses caused
the New England Glass Company to
experiment further with heat-sensitive
glasses. One of the resulting products was
patented by Edward D. Libbey in 1886
and called at first ‘Wild Rose’, later ‘Peach
Blow’. It is a single-layered glass shading
down from red to white in the lower part
of the piece. To produce it, an opal glass
was combined with a gold-ruby glass in
one pot. When a vessel had been formed,
reheating produced the rose colouring in
the required parts. Glasses made from this
metal were moulded, decorated with gild-
ing and enamelling and also acidized to a
satin finish. Occasionally, they would be
left in the original glossy state. The vase
illustrated was decorated by Joseph Locke
for his daughter Nora. The etched reliel
designs covering the surface of the glass
have been outlined and highlighted with
gold traceries and a dark brown mineral
stain.
At about the same time that the U.S.A.
glass-making firms were experimenting
with heat-sensitive glasses, both Thomas
Webb & Sons and Stevens & Williams of
England manufactured shaded wares
which they termed ‘Peach Glass’ or ‘Peach
Bloom’. Webb’s Peach Glass was cased,
the inner layer being creamy coloured with
a slight ly greenish cast in the upper portion.
It is similar in appearance to Hobbs
Brockunier & Company’s ‘Wheeling Peach
Blow’. Stevens & Williams of Stourbridge
produced a glass called ‘Peach Bloom’
which was also very much the same in
appearance. The English Peach glasses
were produced in both glossy and acid
finishes, and arc frequently found with
elaborate gold decoration on both finishes.
Occasionally, Webb’s Peach Glass will
have the Webb incised mark on the base;
Stevens & Williams ware also sometimes
bears a mark under the foot.
The Boston & Sandwich Glass Company,
Sandwich, Mass., manufactured a glass
known as ‘Sandwich Peach Blow’. This
was a single-layered glass, strawberry ice
cream pink in shading, often found in
moulded and twisted swirl decoration; see
the example above, which also has the
characteristic thorn handle of the period.
Overlay decorations in a camphor or
greyish colour are quite usual, the com-
plete piece having an acid finish. Many-
other types of glass are loosely termed
‘Peach Blow’, but basically, apart from a
slight variation in colour shading, the
products can be summarised as follows:
Webb and Wheeling Peach Blow are
always lined, but Mt. Washington, New-
England and Sandwich Peach Blow are
never lined. The Bohemian manufacturers
soon cashed in on the vogue of Peach Blow
wares, producing far cheaper glasses,
which forced the better products off the
markets, though their wares in no way-
resembled those made in America and in
England.

LONG AND LIGHT EARRINGS
Right: A pair of gold repousse and turquoise pendent earrings, circa 1840. Turquoise and carbuncles in association with gold repousse work were particularly favoured at the time.
Below: A portrait miniature of a lady, by Leopold Grosz (or Gross), circa 183o. Note the fashionable coiffure with hair arranged in three clusters of curls expanding sideways, counterbalanced by cannetille earrings en girandole.
Bottom: Two pairs of repousse gold earrings, circa 1840, one with carbuncle the other with polychrome enamel.
Left and below: Four pairs of pendent earrings, set with citrines and pink topazes, circa 1835, characterized by the combination of cannetille and repousse work which marks the transition between the two goldsmith techniques used in this type of earring.
Typically all the earrings illustrated on these pages are long, light, set with semiprecious gemstones or decorated with polychrome enamels and of moderate intrinsic value.
Left: Three pairs of pendent earrings circa
I 870-8o, English, set with diamonds or pearl and diamonds. The designs, though more rigid and stiff, are close to the contemporary French examples illustrated above, but their fluttering ribbons and garland motifs are replaced by plain lines of diamonds.
THE 1860s AND 1870s: BIZARRE VARIETY
In the i86os and 187os earrings became extremely popular, and the fashionable lady would suspend virtually anything from her ears providing it was decorative. Objects of common use such as baskets of flowers or hammers, animals and archaeologically
A parure of emerald, pearl and diamond earrings and matching necklace, with the relevant design, commissioned by Napoleon III and Eugenie from the Parisian jeweller Mellerio in 1863 as a wedding gift to Mar6chal Canrobert. The impact of these earrings relies on the use of important gemstones such as the large cabochon emerald drops rather than the explicit archaeological motifs, though the Greek key pattern and the extensive use of yellow gold even for the setting of the diamonds betrays an archaeological interest. Emeralds were the favourite coloured gemstones of the Empress Eugenie and because of this became one of the most popular gemstones of the time.
WAFER-THIN: EARRINGS OF THE EARLY 19TH CENTURY
Right: A portrait of Maria de la Conception Rodriguez of Granada, painted by Jose Gil in 1816. Her earrings, typical of the early i 9th century, are two circular gold plaques set with corals connected by fine chains. Their linearity and two-dimensional quality is well suited to the low d6collet6 and contemporary hairstyle of Classical inspiration.
Above left: A diamond pendent earring, early
i 9th century, showing how the structure of the contemporary gold earrings made of articulated plaques was rendered, almost unaltered, in lavish gemstones such as diamonds.
Above right: Pair of gold earrings, early i 9th century, made of several paper-thin gold plaques of different shapes connected by lateral chains.
Above left: Pair of gold earrings, early i 9th century. Although quite long, these earrings are comfortable to wear because they are cut out of very thin and light gold sheet and not set with gemstones.
Above right: A pair of gold and enamel pendent earrings, probably French, early T 9th century, decorated with portrait miniatures of a man and his wife. Though the design is typical of the
time, this pair presents unusual sentimental imagery: a dove, a pair of flaming hearts, the inscription ‘Fidel’ and forget-me-nots.
TORPEDO-SHAPED DROPS OF THE
1830s AND 1840s
Opposite and below: Three pairs of gold, chalcedony and gem-set pendent earrings, each accompanied by a typical Maltese cross pendant en suite, circa 1830. Contemporary fashion encouraged the use of such elongated drops decorated with applied gold floral motifs, often set with turquoises or other coloured gemstones. They were carved in white or stained chalcedony, usually blue or green.
Right and far right: Two examples of repouss~ gold earrings of elongated drop design, circa 1840, the first applied with turquoise florets, the second decorated with quatrefoil motifs suspended from a shell-shaped surmount. Earrings of this type were usually made of thin foils of metal decorated en repousse and extremely long (i0-12 ems). Their size and lightness were dictated by fashion and economic factors. The exaggerated horizontal lines of dress and hairstyle needed to be offset by long pendants, while at the same time the scarcity of precious metal encouraged the use of wafer-thin foil of embossed gold.
Below centre: A gold and gem-set torpedo-shaped earring, circa 1835, combining embossed and cannetille decoration.
FROM CANNETILLE TO REPOUSSE
Left: Two gold cannetille, diamond and gem-set parures, English, circa T 830. In both cases the parures include a pair of earrings set with rubies and emeralds respectively. Though the design is that of the traditional girandole, the setting in cannetille is typical of the time, the design of the earrings matching those of the necklace
pendants. On the Continent canetille earrings were mainly set with semiprecious stones such as foiled topazes, amethysts and citrines. In England more expensive gemstones such as emeralds, diamonds and rubies were often used.
Right: An exceptional pair of pendent earrings set with aquamarines within repouss~ gold borders, circa 1835. These earrings are typical of the time for their length (12 CMS approximately), for their lightness (15 grams) and for the choice of the stones, two large kite-shaped aquamarines. The lightness of the mount makes them comfortable to wear in spite of their size. Gold repouss~ work replaced cannetille because it was cheaper to manufacture and used small quantities of precious metal.
EGYPTIAN AND CLASSICAL STYLE
Above: An impressive pair of gold earrings and matching necklace, circa I 870. The dominating element of these jewels is the pharaoh mask, so the Egyptian inspiration is sufficiently obvious. Nonetheless the surmount is Classical Greek, a rosette; I 9th-century revivalism was often the result of such combination of elements deriving from different cultures and periods.
Opposite:
A group of Classical revival earrings, circa 1865. Top left: laurel leaf suspended from an Athenian owl surmount. Top right: A pair of gold rams’ head earrings, deriving its design from Greek examples of the late Classical period, the antique counterparts usually consist of a tapered hoop to be inserted into the earlobe terminating with a rams’ head motif, in this case the rams’ head is suspended from a rosette surmount. Below left: A pair of gold and cornelian intaglio earrings, by Castellani, incorporating original Roman intaglios that depict a trophy of arms and a hunting scene. Below right: A pair of gold pendent earrings, by Ernesto Pierret, each designed as a triangular panel decorated with beaded work and corded wire typical of Greek and Etruscan goldsmithwork, flanked by baton motifs with spherical drop terminals.
Opposite: Two pairs of Roman earrings, circa 1870- The first by Civilotti of Rome, combines elements from various sources. The amphora motifs in matt gold find precise counterparts in Greek and Etruscan examples, the gold mosaic plaque with its Christian symbolism is reminiscent of Byzantine mosaics, while the lilies of the circular surmounts belong unmistakably to the i 9th century. The second pair, of gold and Roman mosaic, carry lozenge-shaped plaques with portraits of Sabina and Maximus Caesar. Note in this case the contrast between the sober, classical lines of the pendant and the frivolous design of the floral surmount.
Above: A pair of gold and enamel pendent earrings, circa 1870, in the shape of stylized amphorae. The design has no specific counterpart in Antiquity but is a pastiche of various elements. The amphora motif derives from a popular type of Hellenistic earring; the granulation and corded wire decoration from Greek and Etruscan tradition; and the stylized papyri and palmettos in bright contrasting colours are Egyptian.
Left: A pair of gold and Roman mosaic earrings, circa 1870, in the shape of ewers. The gold chains with pearl terminals are meant to simulate water being poured out — an amusing i 9th-century touch not to be found in Antiquity.
A RANGE OF REVIVALS: THE 1870s
Many Classical designs took the amphora as their model, in, for instance,
tortoiseshell (right) or lapis lazuli (below right). Rams’ heads feature as a pair of gold earrings (below).
Above: Gold and enamel a baule earrings in the Etruscan tradition, seen in front, back and side views. Right top left to bottom right: Hardstonc maenad heads set in elaborate gold and enamel mounts; gold rosette; Wedgwood jasper-ware drops decorated with a white figurative frieze on a blue ground; two earrings based on amphorae in matt gold; and finally a pair of Japanese-influenced gold and polychrome enamel earrings designed as fans on screens.
LIGHTHEARTED EARRINGS OF THE 1860s AND 1870s
Common features of these earrings are a playful naturalistic inspiration, the use of relatively inexpensive material such as gold, enamel, ivory and turquoises, and the combination of bright colours. They are in line with the concept of novelty jewellery, more a fashion accessory —hence the low value of the materials — than precious heirlooms to be treasured.
Left-hand column
Above: A pair of gold and turquoise pendent earrings in the shape of bulrush sprays, the heads pave-set with turquoises. English, circa i 86o.
Below: A pair of gold and enamel earrings, French, circa 18 70, designed as birds nesting in bulrushes.
Centre column
Above: A pair of gold and tinted intaglio earrings, English, circa 1870, depicting goldfish in round bowls.
Middle: A pair of three-coloured gold and enamel earrings, probably French, circa 1860, designed as coiled snakes supporting bunches of grapes.
Below: A pair of gold and enamel earrings, English, circa 1870, in the form of frogs amongst bulrushes in a triangular frame of twigs.
Right-hand column
Above: A pair of gold and tinted ivory earrings, English, circa 1860, designed as cascades of fuchsia blossom carved in tinted pink ivory.
Below: A pair of silver-gilt and turquoise earrings in the form of nesting birds pave-set with turquoises, the wire-work nests containing pearl eggs, French, 18.50-60.
FASHIONS OF THE 1870s
Above: Five designs for earrings from the archives of Mellerio, Paris. Their variety is a reflection of the eclecticism of contemporary jewellery design.
Noticeable, however, is the persistence of motifs of archaeological inspiration such
as the amphora-shaped drops, the cameo supporting a trophy of love and stylized papyri.
Opposite: Among the earrings of naturalistic inspiration fashionable in the I 870s, those designed as acorns found great favour throughout Europe. In Mellerio’s archive are two variations of the same design (below), while similar earrings with a matching pendant are advertised in a contemporary issue of the magazine La Femme et la Famille.
Right: Stylized papyri also form the surmount of this English gold and turquoise earring.
RETURN TO NATURE
During the i 86os women suspended all sorts of ornaments from their ears, from delicate and appealing bouquets of flowers to rather repulsive Brazilian beetles.
Far left: Two pairs of Italian gold earrings, i 86os. The upper pair, set with pearls, has rather disturbing hands supporting a basket of fruits. The lower pair consists of acorns on a two-oak-leaves surmount.
Left: A pair of gold and stained ivory earrings designed as cascading fuchsia blossoms, English, 18 6os.
Above: A pair of Brazilian beetle earrings, English, i 86os. The improved communication with South America prompted the introduction of unusual materials such as Brazilian beetles, whose hard, brilliant and iridescent green shell could be mounted as a gemstone.
EROS, AMPHORAE AND OIL LAMPS
Variations of amphora- and lamp-shaped earrings, circa 1870. Left: A mask of a Maenad supports an amphora carved in lava from Vesuvius, and a pair of gold, enamel and pearl earrings in the shape of oil lamps, by Carlo Giuliano, circa ‘865, modelled on lamps used for votive offerings. Below: a pair of gold earrings designed as amphorae suspended from fine chains; a gold ewer-shaped earring decorated with corded wire and granulation; and a seed pearl, gold and banded agate earring designed as an amphora on a disc surmount, by Carlo Giuliano, bearing the maker’s mark C.G. and the retailer’s mark HR for Hunt and Roskell of London
Eros, or Cupid, a recurrent figure in Hellenistic earrings, appeared frequently, involved in various activities, in earrings of the 18 6os and 18 70s. In two examples (above right) he is riding a gold dove decorated with corded wire and granulation simulating the plumage; the lower pair retains the original fitting, very close in design to the Antique prototype, while the upper is a later alteration.
In a pair of gold and enamel pendent earrings by Eugene Fontenay, circa 1870 (above), Eros is depicted carrying wine jugs on painted enamel plaques imitating Roman wall paintings, while in a pair of gold, seed pearl and enamel earrings by Carlo Giuliano, last quarter of the i 9th century (bottom right) he is playing the lyre and holding a mirror, on circular enamelled plaques.
Left andfar left: Two pairs of earrings set with cameos carved respectively in lava and banded agate, circa 1870.
RENAISSANCE REVIVAL
A pair of gold and polychrome earrings, by Carlo Giuliano, circa 1865, designed as a stork devouring a snake. The subject derives from a Renaissance emblem — the soul overcoming carnal pleasures — and the interest in the sculptural effect from Renaissance jewellery.
Above: A pair of gold and Roman mosaic earrings and matching brooch/pendant, the surmounts of the earrings depicting red, green and white scarabs supporting three elongated drops.
Left: A gold and Roman mosaic pendent earring, the circular surmount decorated with a dolphin and supporting an elaborate drop decorated with the figure of Cupid.
ROMAN AND FLORENTINE MOSAICS OF THE 1870s
Roman and Florentine mosaics, widely exploited in jewellery at the beginning of the i 9th century, came back in great favour in the late i 86os. Roman micromosaic technique was especially favoured, not only because it was suited to render motifs of archaeological
inspiration but also because its technique derived from Antiquity. This consisted in arranging minute coloured glass paste tessarae within hardstone, glass or gold borders.
Left: Gold earrings of archaeological design decorated with Roman mosaic plaques of winged putti, and a brooch/pendant showing a Raphael tondo.
Below left: A pair of Florentine mosaic earrings set with onyx and coloured stones. Florentine mosaic consisted of an inlay of differently coloured hard and semiprecious stones arranged in naturalistic patterns.
Below centre: A pair of gold and Roman mosaic half-hoop earrings in Egyptian revival style. Note the scarab, similar to the example illustrated on the opposite page.
Below right: A Roman mosaic earring of floral design.
SOUVENIR EARRINGS
Since the beginning of the century earrings and other jewels set with Roman mosaic plaques depicting architectural views of Rome or scenes from the Campagna had been popular souvenirs to take back home. Early i 9th-century earrings are characterized by a very simple and linear design. They usually consist of an oval surmount supporting a pear-shaped drop or an oval plaque connected by fine chains. The mosaics are of a high quality, consisting of very small tessarae where the colours are graduated in a very subtle manner giving the illusion of a miniature painting. A good example of this is the pair of earrings (left) set with four mosaic plaques of famous views of Rome including the Pyramid of Cestius and the Columns of Trajan and Antoninus.
Later examples of the 18 6os and 18 70S tend to be more elaborate in design, adapting shapes and decorations to contemporary trends. The quality of the mosaics though, is coarser, a consequence of the increased demand. The earrings and matching pendant (right) with mosaic plaques depicting peasant women of the Campagna in the typical ciociara costume are good examples of the time; their Roman origin is confirmed by the city’s gold hallmark. Note the ubiquitous Egyptian scarab motif on the surmount and the coarse tessarae.
Star motifs first appeared in the late i 86os as an inlaid central decorative motif of earrings set with large cabochon gemstones such as amethysts and carbuncles or enamel bosses as the example illustrated here in black enamel and half pearls (far left). Later six-, eight-, twelve-pointed stars, or more, became extremely popular, often accompanied by a matching pendant and set for instance, with pearls (left).
The popularity of knife-wire setting and the fashion for light and less symmetrical shapes prompted, in the late 18 8os and i 89os, the development of shooting stars and comets.
Opposite centre and far left below:
Numerous points alternate with weightless knife-wires set with diamonds. Left: A pear-shaped drop terminating with a graduated fringe. Above: Set of twelve-pointed star earrings and matching pendant set with pale opals.
Top right: Designs by Mellerio for two variations of star-shaped pendent earrings, part of a parure commissioned by Queen Isabella II of Spain.
INNOVATION AND TRADITION:
FRENCH EARRINGS OF THE 1870s AND 1880s
Two pages of earring designs in pencil and gouache of the late 1870s and early i 88os from the archives of Mellerio, Paris. They range from naturalistic floral creations to pendeloques and girandoles in the i Sth-century tradition, mainly set with pearls and diamonds, together with amusing arrows which appear to pierce the ear, in the style of novelty jewellery. The eclecticism of the sources of inspiration is especially evident on the right-hand page, where Classical archaeology with a typical Greek key pattern, naturalism with floral motifs, Persian and Northern African art with botch and crescent hoops co-exist.
Above: A collection of gold and gem-set earrings spanning the years from 1850 to the 1870s. Noticeable are the small compact earrings of the I 850s designed as clusters of foliate motifs or coiled ribbons; the long pointed drops of the 18 6os in archaeological revival style; the oval panels star-set with half pearls of the early I 87os, and the tiger’s claw earrings fringed by gold drops of the I 870s, brought back from India as souvenirs to commemorate hunting expeditions.
Left: A page of earring drawings from Cartier’s archive in Paris, dated from March 1874 to May 1874, illustrating some of the great number of shapes, both long and short, fashionable at the time.
FRINGED EARRINGS OF THE 1870s
One of the most distinctive forms of earring in the
18 70s consisted of a circular, oval or otherwise shaped panel variously decorated with enamel, gemstones or chased gold, supporting a graduated fringe of articulated pointed drops. The type was particularly fashionable in England where the favourite surmounts for the tagged drops were oval carbuncles (below), or enamel plaques star-set at the centre with various gemstones (opposite). Fringe or tassel earrings with matching pendants were popular throughout Europe as testified by the archival records of the German jeweller Kreuter dating from 1868 to 1872 (right). More unusual surmounts were occasionally exploited, such as the trapeze-shaped Wedgwood jasper-ware plaque (opposite lower right).
CASCADES OF FLOWERS
Among the plethora of 1870s earrings those designed as cascades of flowers, flowerhead clusters with pampille decorations or sprays of leaves and flowers were particularly favoured by a more conservative public.
Far left, top: A pencil and gouache drawing by Mellerio depicting a flower spray earring. It is interesting to note how the design includes the ear to show precisely how the earring should be positioned on it. Beneath it are two ink designs by Mellerio in the form of flowers with
cascading stamens.
Left: Two ink drawings by the German jeweller Kreuter of 1873, depicting earrings in the shape of cascades of flowerheads and leaves.
Lower left: A gold and turquoise demi-parure comprising a pair of fuchsia earrings and a matching pendant. Note the naturalistic rendering of the blossoms and the use of calibr~- cut turquoises. Though turquoise had been a popular stone for many decades it is only in the
i 870s that it began to be cut en calibre in order to fit the shape of the mount.
Opposite: English diamond-set examples belonging to the same type as those by Kreuter.
BEETLES AND BACCHUS
A gold and Brazilian beetle demi-parure comprising a necklace and a pair of pendent earrings of modified girandole design, probably English, circa 18 70. In this case a ‘novelty’ material — the Brazilian beetles — is combined with an overall archaeological design in a bizarre and unconventional way. The iridescent green beetles are turned into miniature tortoises by the addition of feet, head and tail in gold; on the earrings they are clustered in groups of four.
ARTISTRY OF LALIQUE
Right: A pair of opal, enamel and gold pendent earrings, by Rene Lalique, French, circa I goo, in their original case. The fluid line, the thistle motif, the choice of the opal as a gemstone and the opalescent enamel epitomizes Art Nouveau jewellery. Though earrings continued to be worn at this time, they were not a particularly prominent ornament so the large proportions of this pair of Lalique earrings are an exception rather than the rule. Even within Lalique’s unconventional and daring production of jewellery, they may be regarded as a rarity. The back view (bottom) shows the unusual clip fitting which anticipates the fashionable clips of the thirties.
Upper left: A collection of very simple and relatively small earrings typical of late i gth century and of the very beginning of the loth century. From left to right: A peridot and diamond cluster earring, the large peridot claw-set at the centre; a diamond earring simply claw set with a brilliant-cut stone; a carbuncle (cabochon almandine garnet) and rose diamond cluster earring, probably by Boucheron; a diamond earring designed as a circular cluster of table-cut stones.

CUPBOARDS AND SIDE TABLES
It is a rather curious reflection that so many years should have passed without men having devised any means of locking things away privately except in a chest. It tells its own story, that they should have preferred to use something which could be used conveniently for travelling. Once they came to establish their homes on a more convenient basis, however, the necessity for cabinets to hold valuable or private papers, and cupboards to store various other items became felt. Thus wall furniture became increasingly common.
The early form of side table is given in Fig. 26, a piece dating from about I Soo or soon after. It is virtually a chest, with the corner posts continued downwards to raise it well up from the floor. This was probably its origin. Not that a man, having a chest, would decide that by lengthening the posts he could evolve a sideboard, but that the method of construction was automatically adopted once the idea of a sideboard was thought about. There was probably a subconscious connection between the two ideas, so that it is likely that there was a direct evolution from one to the other. The side table exemplifies the use of the pierced panel, and another point that will appeal to practical readers is the use of the ” mason’s mitre ” in the moulding surrounding the panel. The use of this is explained more fully on p. 44•
Another kind of furniture of the early Tudor Gothic period was the cupboard pure and simple as shown in Fig. 27. It is of the simplest possible construction, consisting of so many boards pegged together and held by the angle plates and strap hinges. Often such cupboards had panels pierced with Gothic tracery designs such as those given on p. IS. In fact A is taken from an old cupboard of the kind. Their purpose was probably to hold food, as the pierced panels gave ventilation.
Of a similar type, but of infinitely better construction, is the cupboard shown in Fig. 28. In place of the planks is a framing of four posts, joined by rails with grooves around their edges to hold panels. Here the last-named are pierced and carved in the form of Gothic windows.
The Court Cupboard.—The development in Elizabethan times is shown in the Court cupboard in Fig. 29. This is worthy of a few moments’ attention because it contains many typical features of the period. It was a cupboard which became extremely popular, probably because it gave good accommodation and there was excellent scope for decorative treatment. Note first the lower doors with their three-panel arrangement. Apart from strength, this had the advantage of keeping the panel width down, and so saving the necessity of jointing up. The framing is channel-moulded ; that is a shallow groove moulded at the sides is worked along the centre of each member.
Incidentally, whilst on the subject of mouldings, it should be noted that in every case they are worked ” in the solid,” the substance of the framing being moulded. It is mentioned here in particular because it will be seen in the next chapter that the tendency in the following century was to use applied mouldings instead.
Attention has already been drawn to the bulbous turnings and their elaborate carving, Fig. 29, and we may now turn to the upper cupboard portion with its sloping sides. It was probably the desire to make space for the bulbous turnings that prompted the cutting away of the cupboard, and at the same time to provide a useful standing space at each side. It will be found that when, later, turning began to decline, the upper cupboard became rectangular in shape, being just set back a few inches from the line of the lower cupboard. Eventually the turnings disappeared almost entirely, being replaced by single drop turnings—but of this we shall see more in the following chapter. It is mentioned here because it helps to explain the reason for the shape of the upper cupboard. The carving in the frieze is a typical Elizabethan detail which continued into the seventeenth century.
BEDSTEADS
Sleeping arrangements in the early years were of the simplest and most primitive form for everyone except the chief persons in the household. The fifteenth century saw considerable improvements in this respect, though it was not until the next century that beds became at all common. There were two kinds, the panelled head and foot (very like the modern form of wood bed), and the four-poster. The last-named developed into a really amazing structure in the time of Elizabeth. That the rooms were abominably draughty is the probable reason for its popularity. The tester or panelling above the bed was hung all round with curtains, so that the sleeper was literally lying in a little room built within the main bedroom. It must have been close and unhealthy, but presumably people preferred that to draughts.
That great importance was attached to these bedsteads is shown by the frequent reference made to them in old wills, and in view of the amount of work put into them they must have been costly things to produce. That in Fig. 31 contains features found in most old beds. Note that the bed frame itself is separate at the foot from the front posts. This was usual in Elizabethan beds, though towards the end of the century the tendency was to join them up.
Figs. 32, 33, and 34 will prove of particular interest to practical cabinet makers and draughtsmen, though they are well worthy of the attention of all students because the sections of mouldings and carved details are extremely important factors when dating a period piece.

TABLES
The table is a fairly obvious piece of furniture. It is required for all kinds of purposes in the house, though its chief function is for use when dining. One of the earliest surviving specimens are the huge trestle tables at Penshurst Hall, Kent. They date from the fourteenth century, when it was still the custom for the entire household to dine together in the great hall. One would be placed across the upper end of the hall, usually on a raised dais, and another, or sometimes two, at right angles to it, going lengthwise along the hall. The more important guests used the raisedThe tendency to use a framed-up construction already mentioned in connection with the chest is seen in the next stage of the table, when an underframing of four or six legs joined by rails (such as in the present-day table) was used. There stands in the museum at South Kensington an interesting table dating from the opening years of the sixteenth century. It has square legs with the corners chamfered, and the top rails are shaped on the underside with the Gothic arch formation. The long form in Fig. ig has this shaping—in fact it is a companion to the table of which we are speaking. Its most interesting feature, however, is that it is of the ” draw ” type ; that is, it is provided with extending leaves which, contained beneath the top when not required, can be drawn out, so increasing the size of the top considerably. As a matter of passing interest, this type of table has again become popular at the present time ; indeed, few extending tables are made now which have not this method of extension.
Bulbous Turnings.—The draw table of the Elizabethan period is shown in Fig. 23, and the feature that at once strikes one are the heavy bulbous legs. These represent a fashion in turning that had the most amazing popularity in Elizabethan times and in the first half of the seventeenth century. Turning had been introduced in this country during the sixteenth century, though it does not appear to have been widely used until about the middle of the century. One imagines that the turners, having acquired the technique, decided to make the most of what they had learnt, for there is nothing really logical about such disproportionate legs. The strength of the leg is governed by its thinnest part, so that the heavy bulbous part is entirely wasted from the constructional point of view.
In the particular table shown in Fig. 23 the legs are plain, direct from the lathe, but in most cases they were elaborately carved with nullings, scrolled acanthus leafwork, and other details, as shown on the turnings in the Court cupboard in Fig. 29. Possibly this is another reason why they appealed to the Elizabethans ; they offered such scope for decorative detail.
In most cases the stretcher rails ran round the four sides of the table in the same way as the rails at the top, but occasionally the H arrangement in Fig. 23 is found. In one, and the retainers were accommodated at the others in rotation, the serfs sitting at the lower end.
These trestle tables were generally made with movable tops, so that they could be taken to pieces and stored away when the floor space was required to be cleared. They were extremely massive in build, with tops of 4 in. or so in thickness, supported by heavy trestles or pedestals. The illus-BUFFET WITH BULBOUS TURNINGS.
Late 16th century.
Thiswas the Elizabethan form of sideboard. The modern dinner wagon
is of similar formation. Often a drawer was fitted beneath the top, the
rail acting as the drawer front.
tration of the hall at Penshurst Place on p. 12 shows these tables.
When as the years passed men sought more privacy there arose a demand for smaller tables which could be used in the smaller private room in which the family took their meals. The rise, too, of the merchant class brought about the erection of vast numbers of smaller houses, and so there have survived a fair number of smaller tables dating from the sixteenth century. The term ” smaller ” is used com-paratively. Actually they usually measure 6 ft. to 9 ft. or io ft. in length.
At the end of the fifteenth century and the beginning of the next the Gothic tradition was still strong, and tables
FIG. 31. FOUR-POSTER WITH PANELLED HEAD AND TESTER.
Second half 16th century.
These were extremely massive structures and were held in great value.
They were often specifically mentioned in wills. Note the holes in the
bed frame to support the mattress and clothes.
were often still of the trestle kind shown in Fig. 22. It will be noted that the rails are held to the trestles with wedges, so that the whole thing could be stacked away when not required in use. It is interesting to compare the Gothic shaping of the trestles with that of the small stool in Fig. 20.other types two legs only were used, these being built into the centre of the end rails and fitted with cross pieces at the bottom, and were a revival of the pedestal leg used in Gothic times, as exemplified by the Penshurst table on p. 12, except that the bottom was joined by a stretcher and the top had a framing to contain the mechanism of the extension.

ELIZABETHAN
COURT CUPBOARD.
Late z61h century.
love of Elizabethan crafts. This exemplifies well the men for ornament of every
kind. The upper recessed portion is inlaid with various woods such as apple, holly, cherry, bog oak, and stained woods. The carving is typical of
the time, being virile, deep and bold if somewhat barbaric in execution.