Posts Tagged ‘gate leg table’

Antiques: Furniture, Porcelain, Silver, Clocks Recently Featured at Antcollectors (1)

South African Furniture

SOUTH AFRICA
THE DISTINCTIVE FURNITURE of the
Cape of Good Hope reflected the styles of the two major colonial powers in the area: Britain and the Netherlands. The various struggles in Europe had also been played out in the colonies, but by 1800 British dominance was assured. In 1820, more British settlers established themselves further up the East coast. The Cape’s position at the mid-point of the trading routes between Europe and the Far East also gave rise to influences from such places as Batavia.
A wide range of furniture was made in the Cape both for the metropolitan homes of Cape Town and the famous white-painted and gabled homesteads of the vineyards. Their forms and motifs were often simplified versions of those in Europe. A slight delay is generally considered when dating colonial furniture. The Empire style, omnipresent in Europe, appears to have had little influence in the Cape, except maybe in an increased linearity of design. Its preference for highly polished timber and expensive gilt-bronze mounts did not suit the local traditions, life styles, or materials.
The most recognizable aspect of South African furniture is the use of local timbers, which unlike mahogany, do not tend to take a glass-like polish to their surfaces. Most characteristic is the combined and contrasting use of stinkwood and yellowwood.
COLONIAL CHAIRS
A wide variety of different chairs were made in the early 19th century. Some so-called “Adam” chairs from the early
Painting in oil on wood This shows typical wall decoration, curtains, and furniture styles of the early 19th century. All the furniture, with the exception of the writing bureau, was made according to the prevalent Neoclassical style. 1815. PRA
years of the century survive at Groot Constantin. With their upholstered, oval back-panels, this type is luxurious and rare. Far more common are
Sheraton and Neoclassical chairs —the latter with pierced vertical splats, caned or thonged (animal hide strips) seats, and tapering, square-section legs that were sometimes fluted. The Sheraton variety, introduced around 1810, had a wide top rail, generally above a second horizontal bar splat and square seat. Later the front leg was either turned or ring-turned. More provincial chairs, the tulbagh, of simplified box-like form, survived into this period. These shapes are also evident on the rusbank, a Cape type of settee-cum-settle with a chair-back.
TABLES AND CUPBOARDS
D-end dining tables and gateleg tables were also produced during these years. Different timbers were sometimes used for the top, frieze, and legs, which were often tapered and fluted like other chairs of the period. Chests of drawers in the Sheraton style, which were popular in Britain, seem to have been relatively rare in the Cape; South African cabinets tended to favour earlier serpentine lines. However, the monumental armoires, corner-cupboards, and wardrobes, so typical of high-production Cape furniture in the 18th century, seem to have been produced into the early years of the next century.

This round, stinkwood table has a moulded edge above a plain apron with a beaded edge. The table top is supported on four ring-turned, tapering legs terminating in turned feet. 1830-40.
Thonged seat
NORTH EASTERN CAPE CHAIR
The top rail of this stinkwood chair is inlaid in yellowwood with simple geometric motifs, which are repeated in the two additional back rails. The chair has simple, carved uprights and similarly carved legs joined by an H-stretcher. One of a pair. 1830-40.
CAPE OF GOOD HOPE CABINET
This low cabinet is made from amboyna, stinkwood, and satinwood. It has a rectangular top, shaped at the front above two bowed
doors, divided by a fluted pilaster. The canted corners of the cabinet are also fluted and are raised on claw-and-ball feet. Early 19th century.

SOUTH WESTERN CAPE HALF-MOON TABLES
These two half-moon tables, which can be placed together to make one round table, have table tops and aprons made from yellowwood, and square-section, tapering legs made from the darker stinkwood with yellowwood inlay. The aprons have a simple moulded edge with stinkwood beading. Сupboard is of simple rectilinear form and has a moulded rectangular top above two panelled doors. The panels have chamfered edges and are set within an additional, rectangular frame. The case has a shaped apron and stands on shaped, bracket feet. I820 30.
The two panelled doors
have chamfered edges set in a rectangular frame.
A shaped apron
rests above shaped bracket feel.
EASTERN CAPE CUPBOARD
CAPE TOWN TEA TABLE
The rectangular top of this satinwood and stinkwood tea table sits above a plain apron. The table is supported on square-section, tapering legs.

SOUTH AFRICA 227
WESTERN CAPE SETTEE
This stinkwood settee has a carved top rail above a seat back comprising a series of evenly spaced pierced panels – ten in total - and gently outswept arms with simple scroll terminals. The settee is supported on tapering, square-section legs joined by H-stretchers. c.1800.

THONET’S BENTWOOD
THONET’S DEVELOPMENT OF THE BENTWOOD CHAIR- ONE OF THE MOST SUCCESSFUL PRODUCTS EVER CONCEIVED - HAD AN ENORMOUS INFLUENCE ON THE COURSE OF FURNITURE DESIGN.

MICHAEL THONET (1796-1871) WAS BORN in Boppard-
am-Rhein, a picturesque town that was then part of Prussia, now part of Germany. He trained as a cabinet-maker and set up a workshop in his home town as soon as he finished his apprenticeship. However, it was not until he was in his thirties that he began to experiment with steaming laminated wood veneers in order to create bentwood furniture. At first, lie was only able to use this process to produce component parts, such as chair backs, which he incorporated into pieces constructed from
more orthodox, straight, wooden elements. Still, his
work was innovative, and Thonet’s exhibit at an 1841 Koblenz trade show attracted the attention of Chancellor Metternich, who invited him to Austria to make some furniture for the Palais Liechtenstein.

ROCKING CHAIR
The frame of this beech
Thonet rocking chair exemplifies the Thonet technique of using single pieces of wood to create elaborate, elegant, curved structures. The seat and back of the chair arc each made from a simple green fabric sling. c.1880.
TORTUOUS CURVES
To prevent the beech from splitting when it was bent violently into shape, a metal strip was attached to each end of the piece of wood before it was steamed.
BENTWOOD CHAISE LONGUE
Inspired by Arts and Crafts styling, the sinuous lines of the frame and co ms of Thonet’s chaise longue are created from long pieces of bent, solid, laminated beech. The seat is made of woven canc. Suitablefor the conservatory or the garden, this recliner appealed to the taste for more rustic styles of furniture in the late 19th century, although it was, in fact, industrially produced. It is the precursor of Le Corbusiers chaise longue, designed in 1928, which used tubular steel instead of bent wood for the frame. 1883-84.
VERSATILITY AND SIMPLICITY
By 1842, Thonet had perfected his steam-bending process, and in July of that year he was granted an international patent that protected his “chemical mechanical methods” from imitation. The extravagant curlicues of the Kentwood furniture he produced for the interiors of the grand Rococo staterooms at the Palais Liechtenstein are testament to the versatility of his invention.
Once softened through immersion in steam or boiling water, the wood (beech was particularly suitable) could be moulded into almost any shape with the aid of a press. A single piece of timber could be manipulated to form the back legs, uprights, and top rail of a chair. Thonct’s process meant that furniture could be constructed from far fewer members and did away with the need for dovetails, tenons, or any kind of joint; simple screws and nuts would suffice to hold the parts together.
In 1853, Thonet set up his own furniture company — Gebruder Thonet — with his five sons (Franz, Michael, August, Josef, and Jacob) , and designed a factory in Vienna to produce furniture that could be packed flat for shipping and assembled at its destination. Before long, Thonet’s bentwood furniture was being exported all over the world.
WORLD-BEATING DESIGN
Mid-19th-century Vienna was famous for the lively political and cultural debate that found its focus in the city’s cafes, and these establishments proved the ideal testing ground for Thonet’s new bentwood
chairs. Light yet durable, their distinctive but understated style and modest cost made them a hit with the hospitality industry. Thonet’s first large-scale commission was to supply chairs to Vienna’s Daum coffeehouse in the late 1850s, and the world-beating “No.14″ chair was developed for this purpose. It was so successful that before the turn of the century more than 15 million No.14 chairs had been made and sold throughout Europe. This was functional furniture for the masses rather than furniture as a signifier of wealth, and the industrial production lines in Thonet’s factories across central Europe were turning it out in huge quantities.
THE CONTRIBUTION LIVES ON
When compared to the convoluted decoration of so much mid-19th-century furniture, the bentwood designs of Thonet and his sons are positively Spartan. Le Corbusier commemorated this refreshing aspect of Thonet’s oeuvre in 1925 when he used the No.14 chair as part of his hugely influential I’Espirit Nouveau exhibit, espousing his rejection of decoration in favour of function. It is unlikely that John Henry Belter (1804-63) would have had so much success with his carved laminate furniture in New York had Thonet not laid the foundations before him. Thonet’s legacy has endured well into the modern age — he precipitated Charles and Ray Eames’s mass-produced office chairs (see pp.456-57), and, of course, the modern Hat-pack domestic furniture industry.

Middle East Pottery

The countries and regions that embraced early Islam were ideally located to absorb the cultural, commercial, and technical cross-currents of the early medieval world. Chinese commodities were one of the major influences in Islamic lands – an area that stretched from India to the Atlantic Ocean. Trade with China was well established by the Tang Dynasty (AD 618-906), since many Arabs were resident in Guangzhou (Canton), and in addition to spices, perfumes, and silks the Chinese sent ceramics to the Middle East.
EARLY WARES
From the 9th century, potters in Mesopotamia (now Iraq) were so inspired by Chinese wares that they strove to imitate them. The first types of ware made were buff or red earthenwares covered with a tin glaze. In an effort to simulate metals potters also developed the lustre technique, and during the next 300 years this method of decoration spread through Islamic countries, reaching Spain in the 13th or 14th century. Tin-glazed earthen-wares and lustre wares were two of the most important types of pottery bequeathed to Europe by the brilliant Islamic ceramic tradition. In eastern Persia (now Iran) the crisply contoured 10th- and 11th-century slipwares of Nishapur and Samarkand were subtly decorated with abstract leaf or geometric motifs and Kufic script.
PERSIAN WARES
Unique to the Islamic world is fritware, a glassy composition perhaps developed to copy imported Chinese porcelains produced during the Song Dynasty (960-1279). This grainy, white-bodied ware is often covered in a viscous, deep turquoise-blue glaze. Between c.1215 and 1334 plain and lustred wares were made in the town of Kashan, south of Tehran; the technique was probably introduced to Persia in the 12th century by Egyptian potters.
The sophisticated polychrome Mina’i (enamel)
wares of late-12th- or 13th-century Persia may often
seem crowded and confused, but they are nonetheless
outstanding examples of the Islamic decorator’s art.
Mina’i pottery was made in Rayy (now Rhages) near
Tehran, and is decorated with figures and painted in a wide range of colours. Many examples of early Mina’i ware are painted with large-scale figures in the manner of contemporary lustreware, but later the emphasis was
on small-scale, narrative subjects.
Later Persian wares, made during the
Safavid (1501-1732) and subsequent periods, include those from Meshed (eastern Persia), Kirman (western Persia), and Kubachi (northern Persia), most of which were painted in the style of late Ming and Transitional Chinese porcelains. The bodies, glazes, and decorations of these Persian wares Lire very similar and it is difficult to tell them apart.
IZNIK AND KOTAHYA
In the 16th century, extremely fine copies of blue-andwhite Chinese wares were made by the potters in Iznik (east of  Istanbul) and Kutahya in central Anatolia. The potters in these towns created superb, crisply painted
wares with swirling and scrolling foliage, painted either in blue or in a combination of turquoise, green, and, later, a thick red (Armenian bole). In addition to conventional decorative pottery vessels and dishes, Iznik and Damascus potters produced some of the finest tileworks for mosques and secular buildings. These latter wares were highly influential in late 19th-century Europe, as seen in, for example, the work of the English designer William De Morgan (1839-1917).
KEY FACTS
Early wares
•    BODY buff or red earthenware
•    GLAZE tin oxide
•    LUSTRE ruby, brown, yellow, black, red
•    TYPES tin-glazed wares; lustre wares
•    DECORATION fusion of Chinese and Islamic designs, usually abstract
Persian wares
•    BODY Mina’i: coarse; Meshed, Kirman, and Kubachi: white frit paste
•    GLAZE Mina’i: creamy; Meshed, Kirman, and Kubachi: thick and soft
•    DECORATION Mina’i: underglaze colours and overglaze enamels; Meshed, Kirman, and Kubachi: resemble each other; black design outline may suggest a Meshed piece
Turkish wares
•    BODY Iznik: greyish buff, grainy, and absorbent; Kutahya: buff and thinly potted
•    GLAZE Iznik: translucent, but slightly bluish tone; Kutahya: irregular, gathers in bluish or greenish pools
•    STYLES Iznik: “Golden Horn” (c.1530) decorated with knotted pencilled scrolls; “Damascus” (c.1550-70) very sumptuous, with large-scale floral subjects and saw-edged leaf (saz); “Rhodian” (c.1555-1700) mainly floral; Chinese-style blue-and-white wares
•    PALETTE Iznik: wide range of colours dominated by turquoise and a scaling-wax red (Armenian bole)
•    DECORATION Kutahya: crude, floral, and figural
Marks
Islamic pottery is rarely marked, although individual potters’ marks do occasionally appear; corruptions of late Ming seal marks are used on Persian pottery

Pedestal and kneehole desks
Conceived as both dressing tables and bureaux, kneehole desks first appeared in France and The Netherlands in the second half of the 17th century. Since the 19th century, at least, they have been known as bureaux Mazarins after Louis XIV’s First Minister, Cardinal Jules Mazarin (1602-61). Early examples were commissioned by members of the French court as luxury items. Usually mounted with moulded brass borders and elaborate escutcheons or ormolu keyhole mounts, bureaux Mazarins of the late 17th century are most frequently made of brass-inlaid red tortoiseshell in the style associated with Andre-Charles Boulle (1642-1732).
WALNUT KNEEHOLE DESKS
At the end of the 17th century the bureau Mazarin kneehole desk was adapted and simplified into the kneehole “burry” or desk. Until c.1740 these were usually made of walnut or red walnut, although
provincial examples in oak and fruitwood also survive. The most sophisticated examples include those made of burr woods or of stained woods, simulating mulberry, and also “japanned” kneeholes, usually black or red. The most elaborate George I and George II kneeholes (1714-60) have both crossbanded and featherbanded decoration; the tops and sides are often quarter-veneered. The ever-larger kneeholes made under George III (1760-1820) were constructed in mahogany, often in the solid, with mahogany drawer-linings; they are often exotically decorated, and stand on shaped bracket feet, which replaced the earlier bun feet.
PEDESTAL DESKS
The introduction of pedestal desks – a predominantly British form – reflected the demand for large, freestanding desks, which were more comfortable to sit at than the kneehole desk. First made in walnut c.1720 to 1730, they became widespread in mahogany during the reign of George II. Late 18th-century desks usually have three drawers in the friezes; the pedestals are fitted with either drawers or folio cupboards, and stand on moulded plinths, often with hidden casters. Pine or oak examples tend to be painted underneath with a reddish wash, and Regency pedestal desks are also blackened. During the early I 9th century, exotic timbers, particularly rosewood, salamander, amboyna, and ebony, were used, and firms such as Marsh & Tatham of London enriched Regency pedestal desks with brass inlay. Reacting to this trend, the cabinet-maker George Bullock (c.1777-1818) championed the use of indigenous woods, particularly pollard oak and holly. This return to natural woods and utilitarian designs influenced the Victorian cabinet-makers, whose desks are distinguished by their squatter, slightly heavier form and plain wooden knob handles. More elaborate examples were produced in the late 19th century in satinwood and marquetry, or with painted decoration, by firms including Edwards & Roberts.

• BUREAUX MAZARINS late 19th-century copies often have inset leather tops instead of marquetry ones.
• KNEEHOLE DESKS crossbanding and featherbanding to the sides, brushing-slides, or fitted drawers add to their desirability; lacquered-brass handles (often replaced) arc a good indication of quality – the finest examples often have either engraved metalwork or elaborately pierced backplates; most examples have thin dovetailed drawer-linings in oak, but provincial kneeholes are Often made of pine; early provincial examples have different and cheaper stained timber on the sides.