Posts Tagged ‘geometric pattern’

Longcase clocks
The weight-driven longcase clock, regulated by a pendulum, was introduced c.1660. The long case may have developed as protection for the pendulum and weights – they hung below the movement, which was held with the dial in a hood. Cases were mostly made by cabinet-makers and so reflect the style of contemporary furniture. Longcases are especially linked with Britain, but fine versions were also made in continental Europe and in the USA, where they are known as “tallcases”.
EARLY BRITISH LONGCASES
The earliest British longcases, made from the 1660s mainly in London, had cases of ebony-veneered oak with architectural pediment tops, but walnut-veneered clocks, typically with flat or crested tops and Baroque twist columns on the hood, were fashionable toward the end of the 17th century. The square brass dial had a narrow, applied and silvered chapter ring, applied spandrels of cherubs’ heads, scrolls, or foliage, a roughened or matted brass centre, and heat-treated, durable, blued-steel hands; most examples also had a seconds dial. Perhaps the leading clockmaker of this period was Thomas Tompion (1639-1713).
Marquetry decoration was very popular on the best longcases from the 1680s to c.1710. Before the 1690s this usually consisted of panels of birds and flowers, or geometric patterns, or parquetry, on the trunk and base. Later examples are decorated all over with elaborate designs of arabesques, scrolls, flowers, birds, and figures. Another common feature of late 17th-century longcases k the lenticle: a small, oval, glass window in the trunk
door, revealing the pendulum. With the fashion for larger rooms in the early 18th century, very tall longcases –up to 2.5m ( 8ft 2m) in height – were popular. Classical hood columns that were influenced by contemporary architecture replaced Baroque twists. Dials increasingly became larger and c.1715 the arched or break-arch dial was introduced.
Japanned decoration reflected the European interest in Chinese and Japanese art from c.1700 to the 1770s. Japanning was a European version of the costly, time-consuming process of lacquering. Japanning – usually black and green but occasionally red, yellow, blue, or cream – was painted all over the case on a layer of gesso; gilt chinoiserie designs were then added to the ground.
DUTCH LONGCASES
Longcase clocks were produced in the Netherlands from c. 1670 to the end of the 18th century. Although in many ways they resemble contemporary British clocks, some features are distinctively Dutch. These include the bombe base, sometimes with projecting scrolls; C and S scrolls at the top and bottom of the trunk door; a cast-metal Ienticle surround; large paw
or ball feet; and gilded figural finials. Cases were typically veneered in walnut, with ebony or light-coloured wood stringing or marquetry decoration. Musical work and automata in the dial arch were common features.
The earliest dials were square and had narrow, sometimes skeletonized, chapter rings. Around 1715-20 the break-arch dial came into general use the addition of the arch allowed more
elements to be displayed, such as the maker’s name, a strike/silent lever, the phases of the moon, or even automata. After c1800 the minutes were numbered only every 15.
LATER BRITISH AND AMERICAN LONGCASES In the 18th century high-quality longcase clocks were produced in English cities outside London and in Scotland, especially in Bristol, Oxford, Liverpool, and Edinburgh. From c.1750 the majority of fashionable London makers used mahogany for cases, while oak was popular elsewhere in Britain; makers in the USA, where the industry was well established on the eastern seaboard, preferred indigenous woods such as maple and cherry, although mahogany was also used. London cases of this period typically feature an elaborate pagoda top, two or three brass ball-and-spire finials, and sometimes quarter columns at the corners of the trunk and base, with decorative brass stop-fluting.
The arched brass dial with applied chapter ring and spandrels remained popular and some dials from the 1770s also featured a subsidiary calendar dial, instead of
an aperture. Engraved one-piece brass or silvered-brass dials appeared between 1750 and 1770. Iron dials,
painted with floral motifs, portraits, or mythological and allegorical figures, were introduced in the 1770s and used extensively on British provincial longcases and in the USA, where supplies of brass were limited.
In the Victorian period longcases suffered a decline in quality: painted dials, broad, flimsily constructed cases, and mass-produced movements were common. Novelty and bracket clocks were more popular than longcases, although longcase regulators remained in fashion.
FRENCH LONGCASES
Weight-driven longcases were never made on a large scale in France. More popular at the beginning of the 18th century was the pendule stir socle, a spring-driven bracket clock on a matching tall pedestal or plinth. Cases were made by such leading French cabinet-makers as Andre-Charles BOUlle (1642-1732). Examples by Boulle are typically surmounted by a gilt-bronze figure. In the mid-18th century the best French makers produced a type of longcase which, although not a true regulator or precision clock, was known as a it regulateur. With its outward-curving, bombe trunk, it was very different in style from British longcase clocks. Cases were finely veneered in walnut or rosewood, with rich ormolu mounts and details in mahogany, sycamore, tulipwood, and olivewood.
Production of the pendule stir socle and the regulateur was confined mainly to Paris, but other major centres of clockmaking in the 18th and 19th centuries included the Jura region and the Franche-Comte, the latter renowned for its Comtoise longcases. Most late Comtoise clocks
featured an elaborate pressed-brass pendulum, visible through a teardrop-shaped, glazed trunk section where the case was at its most bulbous; these pendulums were matched by elaborate pressed-brass dial frames.
• WOODS Britain: ebony-veneered oak was used in 1660s, walnut and olivewood veneers in 1670; walnut-veneered cases were used c.1715; mahogany first appeared in 1720s and by c.1750 had largely supplanted walnut, oak remained popular in the provinces in the 1 8th century; USA: indigenous woods Such as cherry and maple gave a distinctive style; some mahogany was also used
• DIALS square dials were typical until c.1715; thereafter the break-arch dial, often featuring a rolling moon or the maker’s name, was popular; silvered dials appeared c.1760, white dials c. 1770, circular dials c.1800; painted metal dials are typical on American pieces
• CASES earliest British cases are in simple architectural style; after 1670s marquetry decoration was used, also on Dutch clocks; lacquer was used in the Netherlands mid- to late 17th century and was popular in Britain c.1720-70s; chinoiserie designs were very popular
• MARRIAGES dials and movements -,veto often removed from one case and placed in another: look for a pendulum that appears too large for its case, a dial that does not fit the hood, or any parts that are not original
• CUT-DOWNS longcases that have been shortened are known as “cut-downs”; peg holes will be visible if feet have been removed; outline of removed cresting or finials may be visible; proportions may look awkward

The Art Deco style of the 1920s and 1930x, which derived ‘its name from the 1925 Paris Exhibition – the Exposition des Arts Decoratifs et Industrials Modernes – was the first truly modern style of the 20th century. .In their subject-matter, style, and bright colours, Art Deco furniture, jewellery, ceramics, cs, posters, sculpture, and other decorative arts reflected the general atmosphere of optimism that prevailed after the devastation of World War I. The increased liberation of women, the rise of jazz music and Hollywood film-making, the preoccupation with speed, travel, and leisure pursuits, and the growth of commercial competition and advertising all had a strong Influence on Art Deco designers. Until the late 1970s Art Deco pieces attracted little interest among dealers and collectors, but since that time, with numerous exhibitions and Publications on the subject, the popularity  of collecting Art Deco has increased enormously.

Like the Paris Exhibition of 1900 –which had been the showcase for the Art Nouveau style – the 192-5 Exhibition aimed to promote France as the pre-eminent centre for the production of luxury goods. Most European countries, except for or Germany, were involved; the USA declined to take part, deciding that it could not meet the entry requirements for examples of work of “new and original inspiration” stipulated by the organizers. The exhibition was therefore dominated by pavilions displaying the work of leading French designers, such as the
furniture designer Jacques-Emile Ruhlmann (1879-1933) and the glassmaker Rene Laliquc ( 1860-1945). The design studios of the major Parisian department stores, such as Primavera at Printemps, La Maitrise at Galeries Lafayette,  and Pomona at Au Bon Marche, displayed complete interiors, with examples of furniture, household wares, textiles, and carpets in matching styles.
Most of the exhibits reflected the “official taste” of the exhibition; forms were adapted from historical or traditional styles, but with lavish ornament of stylized flowers, figures, and animals, and geometric patterns such as zigzags and chevrons. This was particularly evident in Ruhlmann’s Pavilion d’un Collectioneur, with its chairs influenced by 18th-century design, boldly  patterned wall coverings, and elaborate chandeliers, and also in the design by Andre Groult for an ambassadorial boudoir with shagreen-covered furniture.
This style contrasted strongly with the few displays by Modernist designers. The Pavilion de I’Esprit Nouveau was designed by the avant-garde Swiss-born architect Le Corbusier (1887-1965) and exemplified his vision of a new, minimalist architecture and lifestyle. His small two-storey house, with its doors, windows, and other structural elements based on a modular system of standard-sized units, contained mass-produced furniture and was decorated with abstract paintings. Although this style made a strong impact, its influence did not become widespread until the 19 30x, when it was represented at the 1937 Universal Exhibition in Paris and also at the 1939 World’s Fair in New York.

THE 1925 PARIS EXHIBITION
The Art Deco style, although mainly associated with the 1920s and 1930s, did not suddenly emerge fully formed in this period. Rich ornament, exotic materials, and emphasis on comfort – all features of the style – were already evident in the decorative arts, especially in French furniture, before and during World War I. However, the development of the Art Deco style is mainly associated with the 1925 exhibition in Paris, which lasted from April to October. This exhibition was originally planned for 1915, Lis a continuation of the French government-sponsored international exhibitions that were held in Paris from the 19th century, but was postponed because of the war.
MOTIFS, INFLUENCES, AND
NEW MATERIALS
The standard motifs of the Art Deco style included such traditional decorative elements as bouquets of flowers, animals, and figures of young maidens. However, these were always stylized and angular rather than naturalistic and were often combined with purely geometric motifs, including chevrons, zigzags, Sunbursts, and lightning bolts. This emphasis on stylization and abstract and repeated forms was influenced by the growing impact of the machine, especially automobiles, trains, and aeroplanes, and by such abstract art movements of the early 20th century as Cubism and Futurism. The taste for bright colours was also inspired by the vibrant Fauvist paintings of Henri Matisse, Andre Derain and Maurice Vlaminck, which used contrasting tones and non-naturalistic colours.
Such movements were in turn influenced by the stylized, abstract forms of African masks and sculpture, which were widely collected and imported into Europe in large quantities at this time. Certain elements of Art Deco decorative arts, such as ceramic wall masks, show the inspiration of African art, while African figures featured as decoration on the ceramics of such potters as Rene Buthaud (1886-1987). Also around this time, black American culture in the form of jazz music was introduced into Europe from the USA; the jazz-inspired Revue Negre in Paris, featuring the black dancer and actress Josephine Baker, influenced the work of Buthaud and other Art Deco designers.
The taste for Oriental art was encouraged between 1911 and 1920 by the exotic stage and costume designs of Leon Bakst ( 1866-1924) for the Ballets Russes. These had a significant influence on the Art Deco style, and sparked a fashion for Oriental black-and-red colour combinations as well as lacquered furniture, metalwork, and objets d’art. One of the best exponents of the style was the Swiss designer Jean Dunand (1877-1942). Leading sculptors in France, such as Dimitri Chiparus 1880-1950), also produced figures of dancers in exotic costumes.

THE MODERN MOVEMENT
An alternative to the luxury Art Deco style developed mainly outside France, especially in Germany, during and after World War 1. Progressive artists, architects, and designers argued that the new era demanded good-quality, functional design for all; that new technology and machine production should be exploited fully;  and that form must be derived from function, Without unnecessary ornament.
This movement began in 1907 with the Deutscher Werkbund, an alliance of designers and industrialists. In 1919 the Bauhaus was founded in Weimar by the German architect and designer Walter Gropius (1883-1969); in 1925 the school moved to Dessau, and it was closed by the Nazis in 1933. Bauhaus members designed high-quality furniture, lighting, metalwork, and textiles for industrial production, using new materials, including plywood and tubular steel. Many designs, such as the tubular steel furniture by Marcel Breuer (1902-81) and the glass and metal lamps by Marianne Brandt (1893-1983), are still widely produced. Other Modernist designers of the period included Le Corbusier in France, Alvar Aalto (1898-1976) in Finland, and Gerrit Rietveld (1888-1964) in the Netherlands.
Both the decorative and the Modern strands of Art Deco had a strong influence in the USA, where the style’s vibrant colours and rhythmic patterns expressed the optimism of a young
country that was also the world leader in the mass production of consumer goods. Designers including Paul T. Frankl ( 1886-19,58) and Donald Deskey (1894-1989) used materials also favoured by European Modernists, such as chrome-plated tubular steel. In the 1930s designers such as Norman Bel Geddes (18931958) and Walter Derwin Teague (1883-1960) began to develop their own distinctive version of Art Deco, known as “streamlining”.

Art Deco designers used an extremely wide range of  materials. Luxury manufacturers, including Jacques-Emile Ruhlmann, Paul Follot (1877-1941), and the cabinet-makers Louis Sue (1875-1968) and Andre Mare (1887-1932), specialized in fine-quality pieces veneered in exotic woods such as amboyna and Macassar ebony, combined with ivory, shagreen, enamel, gold and silver leaf, and lacquer. Modernist and industrial designers, especially in the USA, showed greater interest in new materials such as aluminium, chromium, and tubular steel. Lavish cinema interiors were created relatively inexpensively from combinations of chromium, coloured glass, and painted concrete. Bakelite, a type of cheap, easily moulded plastic patented in 1907, was widely employed as a substitute for wood in such mass-produced items as radios.

Art Deco Table Wares
Companies engaged in manufacturing products for preparing and serving food found it necessary to accommodate the new trends in modern design. Streamlined and angular shapes can be found not only in sets of china but in kitchen equipment as well. In this section, table wares are not confined to dishes but include other utilitarian and decorative pieces. Because of the great diversity of this category, it is possible to show only a sample of items, but the pieces illustrated should alert collectors to the many possibilities table wares offer. Photographs are arranged approximately in alphabetical order according to the function of the item, ranging from candle holders, centerpieces and crumbers, to pitchers and a toaster!
Table wares basically are made of pottery, glass or metal. Ceramics include earthenware or semi-china, stoneware and porcelain. Simplified decoration distinguishes Deco china from that produced during the Victorian years. Floral transfer patterns covering the entire surface of china gave way to colored line borders or abstract geometric patterns. Sometimes china was left undecorated with the shape or mold drawing attention to a modern image. Geometric shapes other than the usual circular form are seen here in the rectangular bowl and the triangular shaped cup and saucer.
Ceramic table wares can be found at all price levels. Pieces designed and handpainted by Clarice Cliff for the Royal Staffordshire Pottery during the late 1920’s and early 1930’s are highly regarded by advanced collectors. Price can reach several hundred to several thousand dollars for some examples, especially those with floral and landscape decor. “Bizarre,” “Geometric,” — and “Fantasque” were some of the pattern names. The English artist’s signature was included on most of her work. Pieces which do not have her name or signature as part of the mark are usually considerably lower in price. “The Biarritz” soup bowl shown here is one such example. Although the pattern is quite simple, it also merits consideration as a form of Deco table ware. Deco patterns by other English potters are also quite collectible. Many good examples in the moderate price ranges are surfacing. These may be found mixed in with other miscellaneous dishes by dealers who do not specialize in Art Deco.
“American Modern, ” designed by Russel Wright for the Ohio based Steubenville Pottery is also quite collec
tible and much lower in price. This line was made from about 1939 through the late 1950’s. Solid colored surfaces without other added decoration implied a modern concept. Many other European and American pottery and porcelain factories produced their own renditions of “modern” style. Japanese table ware companies used similar interpretations to reach the large American market. Deco patterned china made by the Noritake firm has been attracting many collectors during the last few years. Prices are still affordable but not inconsequential. Table china, however, is probably the largest source of Art Deco “sleepers” and possible bargains today.
Angular shapes or stylized designs cut or molded into glass table wares were made to grace the dining tables of the period. Art glass by French manufacturers is usually too expensive for moderate collectors. The large blue centerpiece bowl made by Daum and the smoke glass bowl by Verlys are two such examples. These would fall into the “investment” rather than the “fun” class of Deco collectibles. But, like ceramics, many types of inexpensive table glass were made during the 1930’s and 1940’s by American factories. Depression era glass collectors began to salvage pieces during the 1960’s. A number of the patterns have unmistakable Deco characteristics. “Manhattan,” a clear glass pattern made by Anchor Hocking is just one type finding its way into Deco collections. The ruby red, cobalt blue and deep green colored glass made by other American glass companies also qualifies as Deco. Quite a few pieces are very attractive, some are even elegant and others are just amusing.
Flatware, serving pieces and decorative table articles can be found in silver, brass, copper, chrome and plated metals. Chrome and plated metals are the least expensive. Nude or semi-nude figures were made into metal centerpieces or candle holders. Prices are competitive with other figural items and examples are just as much in demand. A number of metal Deco items were originally silverplated. Because the plating wears off, items become ugly and lose much of their value. Dealers have found it lucrative to have such objects stripped to the base metal which was usually copper or brass. The copper centerpiece with a pot metal nude is an example which was once silver plated. Do not automatically disregard badly worn plated pieces which have obvious Deco signs. It may be wise to have them stripped and polished by a commercial firm which specializes in that kind of work.

Nabeshima and Hirado
NABESHIMA
The porcelain of Nabeshima (named after the ruling clan) was made at Okawachi, north of Arita, probably from the latter half of the 17th century until c.1870, exclusively for the ruling shogun and feudal lords. As this ware was the preserve of the aristocracy, little of it except “kiln wasters”, or seconds, would have reached the West before the late 19th century. A few examples have been sold at auction since World War II (including some of questionable date). Apart from a few pieces of hollow-ware – bottles, vases, boxes, and censers –most surviving items are dishes. In that category the majority are saucer dishes with exceptionally tall foot-rims (over 1.2cm high); the remainder are small pieces of various shapes.
Nabeshima ware is arguably the most refined of all pre-19th-century Japanese porcelain. The decoration is imaginative, timeless, and meticulously executed. The most popular themes are seasonal flowers or wintry trees, sometimes combined with underlying or juxtaposed patterns, which may be derived from waves, Chinese trelliswork, or basketry. This type of decoration could only have been
achieved by using a stencil or some kind of transfer-printing technique. For example, the repetitive geometric pattern called “calm-water” (seigaha) shows no evidence whatsoever of individual strokes, with their inevitable variations in intensity. Designs are often entirely outlined in underglaze blue with enamel infilling of iron red, turquoise, yellow, pale manganese, and black detailing, in a technique that recalls the doucai
porcelains dating from the early Ming period in China. The glaze is of a soft, pale, greyish-blue tone.
A feature of the characteristic Nabeshima saucer dishes is the underglaze-blue decoration on the
tall foot, which is found on most
pieces. The decoration consists
of a continuous band of
elongated “teeth” resembling
a comb, known as kusitakade.
The underside of the rim is
usually painted with beribbonec
coins (known as “cash”), clump
of formal flowers, or undulating foliage. Like much Nabeshima ware, saucer dishes tend to be decorated in colours, as this was
more desirable than the standard blue.
HIRADO
Some of the earliest Japanese blue-and-white porcelain was produced at Hirado, near Arita, toward the beginning of the 17th century. Production at the sites of Kihara and Nanko was made possible through the employment of immigrant Korean potters. The later wares, from another site at Mikawachi where production is thought to have begun c.1760, are the most familiar. These wares, either white or blue and white, were made from the very pure clay from the island of Amakusa, allowing the most intricate modelling and refined potting.
Production consisted of censers, brushpots, jars, vases, bottles, teawares, bowls, and dishes. From c.184( some of the larger pieces were applied with dragons or shi-shi (a depiction of the Buddhist lion) as either handles or knops. Other pieces were moulded in shallow relief with isolated flower-heads, symbols, or trellis. Blue-and-white wares were sensitively painted in a slightly blurred underglaze blue of varying tone. The most popular themes are children at play or vertiginous landscapes, but birds and large botanical subjects were also used. Border embellishment is invariably small and includes pointed leaves and pendant tassels.

Nabeshima
• BODY virtually flawless
• POTTING thin and always very neatly executed
• GLAZE subtly grained; a soft, bluish appearance
• PALETTE usually polychrome – underglaze blue, iron red, yellow, turquoise green, pale manganese/tan, and, very rarely, black
• FORMS mainly flatwares; saucer dishes
• DECORATION natural subjects
Hirado
• BODY pure white with an “icing-sugar” texture
• GLAZE a soft, bluish hue
• PALPATE either white or blue and white
Marks
Nabeshima wares arc never marked; Hirado wares are sometimes marked with the place of manufacture, occasionally with the potter’s or decorator’s name, or, most rarely, with a date