Posts Tagged ‘kidney dressing table’

JUG  DARK GREEN BOTTLE GLASS Willi
c OMBED OPAQUE WHITE THREADED DECORA I KIN
England, laic iSth early 19thcentury
Hi. 105 mm (4-13 in.)
PIPE IN (TEAR COLOURLESS GLASS WITH OPAQUE
WHITE STRIPED DECORATION
Probably Sowerby’s Ellison Glassworks, England,
about 1X60. I.englh 367 mm (145 in.)
Vessels made from bottle glass, and later
clear glass, with applied glass threads,
usually opaque white in colour, marvered
and combed to the surface of the glass,
have come to be known as ‘Nailsea’ glass.
The tradition that associates this type of
glassware with the Nailsea glass-house,
near Bristol, England, is a strong one, but
since this factory made crown window
glass, the earlier bottle glass wares arc
unlikely to have been made there. Because
most of these vessels were made as a
sideline, little documentary evidence re-
mains to show exactly when and where
they were produced. The few dated
examples come from the early part of the
ioth century. It is known that clear glass
‘Nailsea’ type wares were made at a glass-
house in Warrington in Lancashire. ‘Alloa’
glass is the Scottish term for a ‘Nailsea’
style glass. Though there is little direct
e\ idence, there is no reason why the Alloa
Glass-house in Scotland should not have
produced this glassware.
Many other simple wares in a style akin to
‘Nailsea’ glass were produced in the first
half of the 19th century. Among these were
the friggcrs, or glass fantasies—unlikely
objects such as fantastic tobacco pipes,
rolling pins, walking sticks, shepherds’
crooks, bells, witchballs and musical in-
struments represented in glass. Many of
the rolling pins and most of the tobacco
pipes have applied glass threads in opaque-
white or coloured glass, in true ‘Nailsea’
tradition. It is impossible to say where
most friggcrs were made, and they should
be considered as individual pieces of glass-
makers’ skill made both for amusement
and for commercial purposes. They were
produced as private sidelines in the largest
window glass concerns such as Pilkington
Brothers of St. Helens. Probably triggers
were made throughout the 10th century
but a new interest in them appeared at the
end of the century, when small factories
started to produce ruby pipes and bells,
spun glass ships and birds and walking
sticks in quantity.
JUG IN AMBER GLASS WITH WHITE BLOBBED
DECORATION
Found in one of the Aegean islands, mid-tst
century A.D. Ht. 238 mm (9*35 in.)
Marvering small pieces ofglass into the body
of a vessel is a somewhat cruder form of
decoration than applied glass thread-work.
The Romans certainly favoured this mode
of decoration for their vessels. This jug, in
amber-coloured glass, has opaque white
blobbed decoration. The white blobs cover
the whole of the body and the neck of the
vessel, though only a few stray ones can be
found upon the base. Pieces of white
opaque glass would have been scattered on
a flat stone slab (marver) and caught up on
the hot gather of amber glass on the
Roman glass-worker’s blow-pipe. By work-
ing the gather of glass on the marver, he
would bring the white glass level with the
surface of the amber glass, so that a smooth
surface was achieved when the vessel was
eventually blown. This 1st century A.D.
decoration was probably produced in
Northern Italy.
Adding: The Glass-maker’s Skill
FLASK IN PALE BLUE GLASS WITH ‘PEBBLED’
DECORATION
France, 17th century. Ht. 157 mm (6-13 in.)
Though the technique was never wholly
forgotten, the next notable instance of
small pieces of glass being used as a
decoration on the surface of the vessel
came in France in the second half of the
16th century. The technique had been
practised by the Venetians, and was copied
from them by the French glass-makers.
Their multi-coloured ‘marbled’ or ‘peb-
bled’ glass usually consisted of bright
opaque colours splashed on a light blue
glass ground. Shapes favoured by the
French glass-house which produced this
glass were the characteristically French
pilgrim-bottle and barrel-shaped vessels.
There are ample records that Venetian and
Altarist glass-makers worked in France
from the late 15th century onwards,
though few examples of their work have
been recognised. This ‘pebbled’ glass is a
genuine example of French glass a la
fag on de Venise, but remains distinctly
French in style.
Adding: The Glass-maker’s Skill
JUG IN GREEN BOTTLE GLASS WITH FLECKED
DECORA! IDS
England, 18th century. Ht. 181 mm (7-13 in.)
Glasses with flecked decoration, consisting
of fragmented coloured glasses marvered
into the surface of the glass, have often
been brought under the general heading of
‘Nailsea’ glass. This was indeed a charac-
teristic form of decoration for ‘Nailsea’
glass, besides the bold looped and striped
decoration described in the previous sec-
tion. As already mentioned, ‘Nailsea’
glass must be regarded as a style rather
than as a product of any specific glass-
house. Generally speaking, ‘Nailsea’ glas-
ses were made in green bottle glass,
which was used for its cheapness, as it
avoided the Glass Excise Acts of England
(repealed in 1845). Clear glass with striped
and flecked decoration is sometimes also
ascribed to Nailsea and Wrockwardine
Wood, though it was probably produced at
many of the other centres that made this
type of glassware. Products notably in-
cluded jugs, bottles and flasks in the flecked
ware, though more fanciful examples can
be found, such as top hats.
Hobhs, Brockunier& Company, U.S.A., 1884
Ht. 152 mm (6 in.)
In 1884 a patent was issued to William
Leighton, Jr, of Hobbs, Brockunier &
Company of Wheeling, West Virginia, for
his method of producing ‘Spangled Glass-
ware’. His process was a simple one. Flakes
of biotite or mica were laid on a marver and
picked up on a gather of opaque white or
transparent coloured glass. The gather
with the flakes adhering was then dipped
into a pot of clear colourless glass, which
locked in the ’spangles’. The gather could
then be blown and shaped into the desired
article. Spangled glass became one of the
most popular products in both art and
table glassware produced by the Wheeling
company. Sowerby’s, of Newcastle-upon-
Tyne, England, produced a similar ware,
usually with a deep blue base called ‘Blue
Nugget’. ‘Spatterglass’ is similar to Span-
gled glass, except that instead of metallic
flakes, variously coloured fragments of
glass were marvered into the opaque white
or coloured glass base.
About 1884. Ht. 127 mm (5 in.)
In the same style as the foregoing were the
so-called ‘Vasa Murrhina’ glass products.
Coloured glass and mica flakes were em-
bedded in the opaque base, with an overall
transparent casing. John Charles De Voy
of the Vasa Murrhina Art Glass Company
of Sandwich, Mass., and Hartford, Conn.,
registered a patent for this type of glass-
ware in 1884. Sheets or particles of mica
were coated with gold, silver, copper or
nickel. The coated mica was then incor-
porated on to a gather of glass, which was
subjected to heat. This caused the glass to
flow over and adhere to the mica. The
gather could then be blown into the article
required. Shards of ‘Vasa Murrhina’ type
glass have been found on the site of the
company’s factory in Sandwich, also on
the old factory site of the Boston &
Sandwich Works. Patents for this type of
glassware were registered in England
between 1878 and 1882.
WINE-GLASS INCORPORATING rHREADS Of OPAQUI
WHITE GLASS
Venice, Italy, 16th century. Ht. 131 mm (5-13 in.)
Incorporating threads of opaque white glass
into the body of a vessel was a development
of the Venetian glass-makers. Thin rods
of opaque white glass (lattirno) were
probably set at exact intervals round the
inside of a heat-resistant open container.
A gather of clear, colourless glass would be
blown into the centre of the container, and
the rods of glass caught and worked very
gently into the gather of glass. The bubble,
now containing the white threads, could
then be blown to the desired shape.
Another method that might have been
used by the Venetians was to lay alternate
rods of opaque white and clear, colourless
glass side by side on a tray, and then to fuse
them together in a kiln. These could then
be caught up on a gather of clear, colour-
less glass and blown to the shape required.
In both these processes, in order to make
the ends of the rods meet, the end of the
bubble would have to be pinched together
and the unwanted glass cut away.
The influence of Venetian glass-making
spread all over Europe, notably to Spain,
Germany, France, the Netherlands and
England, during the 16th and 17th cen-
turies. Thus the technique of incorporat-
ing threads of lattimo glass into the body
of a vessel appears in other glass-making
centres besides Venice. Each of the Euro-
pean countries mentioned developed its
own version in the facon de Venise, the
influence of the local glass-blowers making
itself felt, so that pure Venetian inspiration
vanished and strong regional characteris-
tics began to prevail in the glassware. The
jug illustrated—a remarkable example of
the use of broad vertical bands of lattimo
glass between very narrow lines of clear,
colourless glass—is, in shape, a vessel of
typical late mediaeval form in the Southern
Netherlands. The contemporary value of
the piece is reflected in the use of silver-
gilt mounts on rim, handle and base. A
similar glass is listed in the 1559 Inven-
tory of Queen Elizabeth I of England.
In Roman times glass-makers sometimes
decorated the edge of vessels with a rope-
pattern, where an opaque white thread was
twisted and embedded in clear, colourless
or coloured glass. This is the only early
parallel to the Venetian technique of
incorporating threads of white glass into a
vessel. The Italian glass-makers who
migrated to other countries, and their
pupils, certainly had full command of the
technique. As well as the illustrated flute
glass, which has made delicate use of the
technique in the long bowl, handsome-
tankards employing the technique were
produced at Liege or in the Netherlands.
In Germany, the popular tall cylindrical
glass, or ‘Stangenglas’, was not only made
of cristallo glass, but was often decorated
with these bands of lattimo glass incor-
porated into the vessel. Rarely, coloured
as well as opaque white threads were used,
in colours like yellow, purple and blue.
Adding: The Glass-maker’s Skill
A superb sophistication of” the technique
just described is shown in the plate
illustrated. It is in fact made up of two
plates, with opposing white radiating
thread decoration, which were fused to-
gether to form one piece. Tiny air bubbles
were caught between the threads, giving
the plate a rich and delicate appearance—a
wonderful example of the Venetian glass-
maker’s versatility. The essentials of the
technique have been copied successfully
by the American glass artist and tech-
nologist, Dominick Labino, of Grand
Rapids, Ohio. He placed 12 opaque white
threads in a metal container at even dist-
ances and worked these into a gather of
glass, as already described. He then blew
the gather into a bubble, catching the end
of it and twisting the glass one way so that
the threads spiralled to the left. After
forming a bowl shape, he put this into a
specially prepared crucible and placed it in
the annealing kiln to keep warm.
The next stage in the production of
Labino’s vetro di trina was to repeat the
procedure with another gather of glass.
this time with the 12 threads spiralling to
the right. The first bowl shape was then
taken out of the annealing kiln in its
container, and the second partially-blown
gather dropped into it, so that the two were
joined when further blowing was em-
ployed. The two joined paraisons were
then reheated, and a further gather of glass
taken over them, to give the finished object
added strength. From this Labino formed
in the usual way a dish which had opposing
white radiating thread decoration in the
Venetian tradition. The Italian name for
this type of glass means iace glass’; in
German it is known as ‘Netzglas’. Apsley
Pellatt in his book Curiosities of Glass-
making (London, 1849) describes basically
the same technique, whereby two cup-like
formations, one with milk-white canes
spirally applied inside the cup, the other
with milk-white canes spirally applied
outside, were combined, the former over
the latter, to produce a vessel in vetro di
trina. The technique was used in England
and on the Continent in the 19th century.
In the mid-iqth century, Bohemian,
French and English glass factories all
imitated Venetian techniques of glass
manufacture. This included the incor-
poration of opaque white or coloured
threads of glass into the body of a vessel.
So-called 19th-century ’striped’ glass fol-
lowed this technique. Coloured and clear,
colourless glass rods would line a mould.
A bubble of glass blown into the mould
picked up the rods, and they became as one
with the body glass. When the bubble of
glass was deftly twisted, the embedded
rods could be made to spiral around the
body of the finished vessel. To produce
the fine effect seen on the ewer illustrated
demanded a considerable amount of skill
on the part of the glass-maker. A patent
for ‘Improvements In Decorating Glass
With Stripes’ was taken out in 1885 by
V\ illiam Webb Boulton of Bonbon &
Mills, who had the Audnam Bank glass-
house in England.
Ice Glass: The Venetians decorated some
clear glass by plunging a bubble of hot
glass for a moment in water and then
reheating it. This produced a roughened,
fro/en or crackled appearance, given the
name ‘Ice Glass’. A further means of
producing a frosted effect upon glass is to
roll a bubble of glass over a marver that
has previously been covered with frag-
ments of broken glass. The fragments
adhere to the hot bubble, and when the
whole is slightly reheated, form an ‘icy’
effect. The bubble can then be worked to
form the desired article. The beaker
illustrated is a handsome example of the
Venetians’ work. The frosted texture is
only on the outer surface of the glass, the
interior surface remaining smooth to the
touch. Visually, these pieces appear to be
covered with cracks, but the reheating
makes them perfectly whole and quite sale
for use. Once the technique had been
invented by the Venetians, it spread
quickly throughout the Continent.
Apsley Pellatt (1791-1863), the 19th-
century glassmakcr of the Falcon Glass-
house in Southwark, London, continued
to make his mark on his trade by the
publication of two books on glass-making,
published respectively in 1821 and 1849.
In his Curiosities ofGlassmaking, published
in 1849, he described several of the
Venetian techniques, including the pro-
duction of ‘Ice Glass’ or frosted glass. At
the 1851 exhibition his firm made a special
display of the technique, which he called
‘Anglo-Venetian’. In his explanation he
shows how a gather of glass was slightly
inflated, then plunged at nearly white heat
into cold water; it was then immediately
reheated, giving a crackled effect on its
outer surface. The bottom of the bubble
was flattened and a pontil rod attached;
the blow-pipe was removed and the article
finished on the pontil rod. Great care had
to be taken not to overheat the article, as
this would melt out the frosting.
Apsley Pellatt claimed that the technique
of ‘Ice Glass’ was known and practised
only by the Venetians until he revived it in
the mid-i9th century. This would seem to
be incorrect, since several examples of the
technique are to be found from the
Continent between these dates. At first,
only clear colourless ‘Ice Glass’ was pro-
duced, to simulate real ice, but mid-igth
century fashion soon desired it to be
coloured. Usually the base glass was
coloured in ruby, rose, yellow, blue or
green, the fragments picked up being clear
and colourless. Occasionally the reverse
happened, the fragments being coloured
and the base glass clear and colourless. Ice
Glass known as ‘Craquelle’ and ‘Overshot’
was produced by the Boston & Sandwich
Works, and possibly by some other
American factories. It was advertised in
1883 by Hobbs, Brockunier & Company in
‘Rose, Sapphire, Old Gold and Marine
Green’ colourings.

FIRST HALF OF NINETEENTH CENTURY
1800-1850
THE year i800 is a convenient date in the history of furniture only in the sense that it marked the begin-
ning of a new century antique hexagon ladles . Apart from that it showed no sudden change in style any more than the start of any other century countries that art deco was very popular . The same king was on the throne and was to live for another twenty years, although for the last ten the Prince of Wales was to act as regent lion feet table . Furthermore, Sheraton, who published his first furniture book in the last decade of the eighteenth century (see p jennens and bettridge . 181), brought out his Cabinet Dictionary in 1803, and lived until 18o6 elephant mahogany antq . Change was taking place, but no more quickly than at any previous period j s henry furniture .
At the same time, the period 1800-1850 is momentous in that it saw the beginning of the industrial age in which the machine began to replace hand labour hinges leaves antique table . At first its effect was scarcely felt, for the machines themselves were crude and unreliable and had not stood the test of time “holland & sons” cabinet . Furthermore, no one had had sufficient experience in their use to use them to the best advantage hammered flatware crest urn . In any case, their early use was largely confined to Government departments such as shipyards 18th century rococo copper candlesticks . Being individually built, they were necessarily expensive 4 foot walnut drop leaf table .
The use of machines speeds up work and reduces costs, and that was largely the reason for their introduction scottish art nouveau inlay furniture . There was, however, another and, in the long run, a deeper-reaching effect 18th century soup urn . This was the influence on design itself circular extending dining table . When you install a machine its first use is invariably to quicken and ease the more back-breaking jobs, such as converting logs, ripping out parts, rough planing them, and so on wileman ironstone coffee pot . Very soon, however, other possibilities are realised, and you see that it can be used for other work which would be difficult or at least expensive by hand craftsman for wooden vitrine . Then comes the idea of adapting the machine for other operations, so that more and more handwork is avoided sheffield plate candelabra . At last hand work becomes a thing to be avoided, and then is born that insidious idea of making the design to suit the machine silver candlestick dated 1750 . In a broad sense this is inevitable because any change in technique of
FIG french drop front desk . 156 antique table porcelain top . MAHOGANY CHAIR WITH BRASS INLAY pre war veneer antique bureau . 18io-i815-
This is of special Interest in that the back legs are not set square with
the front but line up with the slope of the side rails (see plan) brass frame girandole images . This is a
feature not found in chairs of earlier date anglo-chinese furniture . See also F in Fig first antique table de chevet . 157 decorating with a pie crust antique table . Owing
to the pronounced side curvature this results in the bottoms of the legs
converging value of mahogany marble side table .
manufacture is bound to have its repercussions on design, but the evil comes when sound construction and form are sacrificed to suit the limitations of a machine poole pottery streamline coffee sets .
However, up to 1850 there had not been any serious sacrifice in this sense, and during the fifty years we are speaking about there was a great deal of sound and delightful furniture made, especially in the first twenty years of the century brass sideboard gallery .
For those interested in the subject the following few notes
FIG identifying furniture makers bookcase oak . 158 cassone with pastiglia . BLACK JAPANNED CHAIR WITH INLAY two tier rectangular victorian table . Mid antique square to round drop leaf table . i9th century mahogany tea caddy tripod leg .
The entire back is in papier mficU screwed to the
lower framing early tables . The back, legs, and seat rail are
inlaid with mother of pearl dresser with kneehole .
on early machines may be of value antique wood trestle table with leaves . It should be realised, however, that machines were not of necessity power driven black bone inlay dressing tables . Many of them required human labour to turn them aimone mfg co furniture . Even in 1914 some circular saws and bandsaws were still being made which were fitted with handles, and sometimes pedals, which either the operator or an assistant had to work antique maple desks . Some-times larger saws were propelled by horse labour, the animal being yoked to bar which revolved a centre pillar, which in its turn was geared to the saw rh vase austria . Water and wind power too were used antique sideboard with desk .
As early as the fifteenth and sixteenth centuries machine saws had been devised, these generally being reciprocating saws worked by cranks antique gate leg tables . They were exceptional, however, most cutting being done by pairs of sawyers over a saw pit italian 18th century cabinet makers .
FIG satin birch bow chest . 160 jacobean antique furniture . FULLY UPHOLSTERED COUCH sheraton period cutlery urn . About i85o marquetry tray brass handles .
This sketch was taken from a small model made about the middle
of the 19th century, and is typical of the period 18th century amboyna card table .
No doubt the reason for the development of woodworking machines in the nineteenth century was largely due to the tremendous importance of wood as a basic material for all purposes was there a change in arts in italy between 1920 and 1940 . It was needed for ships, vehicles, houses, some bridges, engineering, agricultural appliances, furniture, and so on antique continental porcelain . It was in fact in Government shipyards that the first serious and really practical machines were made american 19th century side boards .
Samuel Bentham developed the rotary system of cutting as distinct from the reciprocating, and designed saws, planers, boring machines, tenoners, and veneer-cutting machines antique swedish armchairs . These were mostly patented between 1791 and 1793, but it would have been many years after that such machines became generally available to the woodworking industry generally art deco harlequin fine china . Marc Isambard Brunel had also much to do with early machines, and had in fact patents on circular saws in 1805 and i8o8 czechoslovakia vases . A bandsaw was patented by Newberry in 1808, but its success was hampered by poor quality saws, and it did not become really practicable until 1850 when reliable saws were made round oak table dragon legs . Many planing machines were invented in the first fifty years of the nineteenth century, some in U antique gateleg table small .S antique divans .A pictures of expensive antiques . Most early machines had wood frames chinese qing porcelains . It was, in fact, not until the turn of the mid-century that all-metal frames were made 18th century marquetry bow front commode .
The refined and somewhat delicate style as exemplified in Sheraton’s works continued during the opening years of the century craftsman for wooden vitrine . The deterioration in his last designs, as shown in his Encyclopedia, 1804-1807, mentioned in Chapter X, was little more than a pandering to a passing fashion, and it is fortunate that the more grotesque items were not made in greater numbers antique william and mary oak dining room sets .
Other influences were at work, however, and to trace these we have to turn to France, where the Consulate and Empire periods in which Napoleon was the dominant figure was producing a marked style known as Empire russian chair lion . This is dealt with more fully in Chapter XV, but it had its counterpart here in a style sometimes known as English Empire wedgewook stonewear white . Its chief exponent was Thomas Hope, who published his Household Furniture and Interior Decoration in 1807 19th century lion claw pedestal table . This, like the French Empire, went back to Greek and Roman forms for its inspiration, and produced some rather severe designs, mostly in mahogany with brass mounts in the form of vases, laurel wreaths, helmets, honeysuckle, lyres, and so on antique oak draw leaf table . The style owed little to tradition, however, and, although much of it was well made and of good proportions, it seems to strike a foreign and somewhat jarring note antique writing box . Many of the shapes, especially chair and settee legs, seem curiously unsuitable for making in wood antique refectory tables .
An attractive chair of about 1810 is that in Fig french word for chasing . 155, and shows a high degree of skill in its manufacture pedestal dumb waiter . The shaping of the members at the back, which necessarily have compound curvature owing to the plan curving combined with the elevation shaping, is beautifully worked out gate leg vintage drop leaf tables . The back-ward curve of the front legs is characteristic of the period and suggests Hope influence biedermeier antique de .
Another chair of about ten years later in date and of somewhat similar style is that in Fig aristide colotte . 156 and is given because it embodies a feature not found in chairs of earlier date drop leaf table rectangle vintage . If any of the earlier chairs are examined, it will be seen that if a section is taken through the back legs at seat level the wood from which they are cut is invariably square with the front king george iv side board .

FIG bambocci antique . 161 drapery designs for dressing table . CIRCULAR DINING TABLE OF ROSEWOOD, BRASS
MOUNTED antique oval dutch table .
1810-1820 antique dealer furniture iron louis xvi .
The lyre motif of the centre pedestal was a common feature of the period egyptian figurine manufacturer in spain .
The ” strings ” are brass rods drop leaf table gate leg . A brass line is inlaid around the top
an inch or so from the edge antiquevenercoffeettableclawfeet . The latter is cross-veneered; also the
framework edging arabesque vertical plate racks - 2 tier .
Thus the chairs in Fig william france furniture maker . 4o are as shown at A, Fig what antique furniture maker marks under drawer front with number . 157 bureau bookcase writing desk display cabinet 1930s . Even when curved as in Figs 18th century plate racks . 77 or 107 they are still set square as at B and C, Fig fiddleback walnut louis xiv reproduction desk . 157, any convergence at the feet being arranged by reducing the length of the seat rail and cutting the shoulders at an angle sauce boats . Much the same applies to the chairs in Fig antique carved trestle table . 142 and to that in Fig neo-rococco cabinet . 155 tulip porcelain chamber pots . The only exception is in some Adam and Hepplewhite chairs, which have either round, oval, or hooped-shaped seats (see Fig antique half round side table mermaid . 132) chiffonier 19th century . In such chairs, owing to the shape, the rails are tenoned into opposite sides of the leg instead of into adjacent sides as in all other examples sheffield plate candelabra . As a consequence the back legs, owing to their backward curvature, are further apart at the bottom than at seat level forks and spoons in the 18th century . This is made clear at E, Fig french dining draw leaf table stretcher . 157 plain serving table .
Turning now to the chair under discussion, Fig colbolt blue plates and antique . 156, note from the plan that the legs are not square with the front, but are parallel with the sloping sides as at F, Fig marquetry roll top desk . 157 antique refrectory trestle table . As a result the legs are closer together at the feet than at the seat,
FIG chamberpot flap . 162 american oak drop leaf table antique . VICTORIAN DINING TABLE IN WALNUT queen anne antique dressing table . Mid johnstone and jupe table . 19th century 18th century metal chamber pot .
The top is veneered with figured walnut arranged in a quartered pattern cage leg antique table .
A huge bolt passes through the centre, Joining the tripod stand to the
pillar and sub-top framework art deco and exotic leather .
this being produced without any side curvature in the leg antique gothic table grotesque . The shape looks more elaborate than it actually is, the shaping being confined to the side elevation of the back iron and wood refectory tables .
The chair in Fig wedgwood keith murray slip two tone . 158 dates from about I85o and is more interesting than beautiful photo antiquities furniture in france . The entire back is in papier mftche, this being compressed to shape and fixed to the back of the seat, probably with screws antique sheffield piece marked “royal sheffield” . There is in fact considerable dishing and shaping in the back and, when it is realised that it is no more than I in scandinavian art deco furniture . to $9 in antique wrought iron candle sticks . thick in parts, it becomes obvious that such a back would be impracticable in wood “art deco” “dining table” french walnut extension . It is, in fact, an early example of a mass-produced chair and bears the marks of deterioration in design four pillar trestle table . As a matter of passing interest, note how the rails are tenoned into opposite sides of the back legs owing to the hooped shape, hence the divergence at the feet (see also E, Fig age of jazz shelley vases . 157) walnut gaming table with pillar legs .
A couch showing the classical influence of Greece is that in Fig antique replica, french victorian mahogany empire desk writing table . 159 napoleon leather and steel campaign chair . It belongs to the Hope period of the early
FIG heal and russell art deco antique furniture . 163 16th century small tables . SOFA TABLE VENEERED WITH AMBOYNA AND
MARQUETRY hongwu copper red .
About 1815 delatte nancy .
The flaps were invariably supported by brackets pivoted on knuckle or
finger joints cut in wood drop leaf table with pembroke leg value . The legs were usually dovetailed to the base,
and it was common practice to strengthen the joints with metal plates
screwed to the underside 19th century regency dwarf parlor cabinet value .
nineteenth century 19th century leather chest . Fig george speight porcelain . 16o shows the rather heavy and stuffy appearance of a fully-upholstered couch in the middle of the century antique serpentine swedish chest of drawers .
An interesting contrast in dining tables made within about thirty to forty years of each other is shown in Figs drop leaf sofa table . 161 and x62 lyre based sheffield candlesticks . The former, of the Regency period, has a certain grace and charm about it empire sideboard antique value . Here again we see the old classical Tables of the Mid-Nineteenth Century
influence in the lyre motif wooton chest . Light though it looks, the table is strongly built since the lyre-shaped pillar is not pierced right through, but is recessed at the surface only antique red stoneware spittoon . The legs are dovetailed to the base john widdicomb desk . The whole top pivots, so that the table takes up little space when not in use longcaseclocks chinoiserie 18.century .
In Fig vintage wooden handled three tined dinner forks . 162 we pass to a typical Victorian table of about 185o which, whatever one may think of the design, is beautifully made ashtray daum nancy france antique . To us it may lack the refinement and grace of the earlier table, but it is an interesting speculation as to what folk of A daniel quare 1674 tortoiseshell case pocket watches .D pilaster bookstand price . 2oo0 may think of it 17 century english stoneware . For years it has been the practice of people to speak of Victorian furniture with something like contempt (though no one really familiar with it would ever deny its soundness of craftsmanship) furniture canape antiques italian . Already, however, it is appearing in antique shops, especially early Victorian pieces, and it is quite on the cards that folk of the future will see beauty in what we now call heaviness and vulgarity 1925 antique floding desk . Fashions change, and nearly all generations are contemptuous of the works of their immediate forbears “myott son & co”+oriental . Presumably the Victorian designers did not intentionally design things they knew to be ugly—and for a matter of that who are we to talk in these middle years of the twentieth century r
A type of table popular during the period under discussion was the sofa table, an example of which is given in Fig antique pier tables . 163 name a piece of furniture that begins with v . It was a type made popular by Sheraton and had hinged flaps at the ends supported by pivoted brackets furniture + finmar ltd . There were invariably drawers beneath the top standing silver mirror candlestick styles . As the table was intended for use away from the wall the ” back ” frequently had dummy drawer fronts small dressing table with cupboard and drawers . Its form during the Regency period is shown in Fig queen mary mother ship tea dish antiques . 163, which shows the Greek influence of the period in the ornament antique 17th century gentleman’s dresser .
The Regency version of the sideboard generally had cellaret pedestals reaching down to the floor and joined by a centre table portion quite open beneath torror in france . There was generally a drawer beneath the top as in Fig small antique french writing cabinet . 164 yabu furniture . Tapered pedestals too were becoming popular, and the scrolled back shows the beginning of a feature which was often to assume quite gigantic proportions in the late Victorian period, and was often surmounted by an elaborate piece of carving, frequently of extremely fine craftsmanship antique wash stands .
Bedsteads in the late eighteenth century were generally of the four-poster type, but by the turn of the century two SIDEBOARD IN ROSEWOOD WITH BRASS INLAY
1810-X820 staffordshire figure home .
The tapered form of pedestal was popular in the Regency period how much is an oak butler’s tray table worth . The relatively large size of room in which
it would have been used is shown by the great depth, which is 29 in greek neoclassical porcelain . over the centre portion, and 251 in richard ginori doccia 1924 platter .
over the pedestals art deco console table black .
Bedsteads of the Nineteenth Century
kinds developed rectangular drop leaf sofa table . In the one the head-posts with abbreviated tester were retained and the foot-posts eliminated early ming porcelain . Frequently head curtains were used, and these could either be drawn right back or pulled a foot or so down the bed antique tilt top dinner table photos 1800 century . The other type owed its origin to the Empire style of France english refectory table . In this the bed was intended to stand with its side to the wall vintage wooden handled three tined dinner forks . There was a head and foot often sloped and having rather the appearance of a couch—the couch in Fig chinese porcelain shards . 159 is in fact suggestive of the general form, though this is necessarily on a smaller scale 19 century inventions . In some cases curtains were carried on to a shaped tester art nouveau origins .
CABINET WITH BOULLE MARQUETRY empire furniture.com .
Louis XIV antique tea table glass serving tray .
The work is carried out in brass and tortoiseshell, and is
decorated with some particularly fine mounts of brass 19th-century swedish table . The
top is of marble antique chippendale breakfast table . The accommodation consists of a centre
cupboard with door and four drawers at each side 19th century, federal mirror .