Posts Tagged ‘kidney shaped dressing table’

TRANSLUCENT WINE GLASS IN THE
CAMEO TECHNIQUE
Rinnan Empire, possibly isi century A.I).
Hi. 62 mm (2-44 in.)
PORTLAND VASE IN DARK AND OPAQUE
GLASS, CAMEO-CUT
Roman Empire, late isl century B.C. or early isi
century A.I). III. 245 248 mm (0-65 075 in.)
Cameo Class: This technique is a mixture
of both wheel-cutting and engraving, and
in the later period, of acid etching. This
art, certainly practised by the Romans, in
their glass-houses at Alexandria, was
brought to such perfection between the 1st
century B.C. and 1st century A.D. that
glasses like the Portland Vase could be
produced. It is possibly the most dramatic
form of abraded decoration on a vessel. At
least two layers of differently coloured
glasses were needed for vessels of cameo
glass. These would be carved through to
the under-layers by the lapidary’s wheel.
Roman cameo glass (also called verre
double) was usually made up of translucent
white glass cased on to a darker ground of
blue glass, which was then carved with
ornamental designs or mythological or
genre scenes. The scene depicted on the
blue and white glass cup illustrated is a
mythological scene devoted to the worship
of Priapus, a fertility god.
Roman cameos form only a small group of
Roman glass products, bui they rank high
amongst the achievements of the great
glass-makers of this period. Possibly the
most famous of all Roman cameos is the
Portland vase, said to have been found in
1582 in a sarcophagus on the Appian Way
near Rome. It was bought by the British
Museum from the Duke of Portland in
1045. To make it, two gathers of glass, one
cobalt blue, one opaque white, were fused
together and probably blown and shaped
as one. This would have to have been very
carefully annealed (cooled under con-
trolled conditions), for if the rate of
cooling on cither face was even slightly
different, the glass would shatter. When
annealed, the glass would have been
marked with the desired decoration, and
the larger unwanted areas of white glass
ground away with heavy wheel abrasion to
the blue underneath.
OVAIL CAMEO (WITH A DEMONSTRATION OF HOW IT
WAS MADE)
Roman Empire, 41b century A.D.
Ht. 41 mm (163 in.)
The delicate work necessary to finish off
the figures on a cameo would probably
have been accomplished with fine wheel
abrasion, since even at this early period it
was possible for wheels the size of a
pinhead to be made for fine work. The
manner of carving was very much akin to
the carving of a layered gem-stone such as
onyx or banded agate. The changes in
thickness of the opaque or translucent
white glass layer brought about by the
differences in the depth of the carving
produced subtle tonal variations. The
illustration shows the various stages a
Roman glass-maker would go through to
produce the cameo of a youth’s head and
shoulders. First the two layers of glass
were fused together, then the oval shape
cut out; the main areas of white which
were not needed were then removed, then
the finer details were filled in.
FI.ASK WITH CAMEO CUT DECORATION
Persia, oth-iolh century A.D. Ht. 150 mm (59 in.)
Between the period of Roman cameo-
working to the great revival of the tech-
nique in the 19th century, it is often
assumed that no such work was carried
out. This is not quite the case, for cameo
glass was certainly made in Egypt and
Persia in the 9th and 10th cerituries A.D.
Complete pieces have been found from
those countries, and fragments of cameo
glass of the same period have been found
in Samarra. The overlay glass is either
coloured green or blue. The flask illus-
trated is an outstanding example of Persian
camco-cut work. It is in colourless glass,
cased with green depicting the form of a
hare, the articulation of the joints being
cut away to the colourless glass beneath.
This cameo glass formed part of the school
of relief-cutting which flourished in Persia
and probably Mesopotamia in the 9th and
10th centuries. Cameo glass was also
produced in China well before the 19th
century.
John Northwood, born in Stourbridge,
England, in 1837, was the first, and lead-
ing, exponent in England of the art of
cameo glass. After completing his famous
relief-carved ‘Elgin’ vase, he was commis-
sioned by Phillip Pargeter of the Red
House Glassworks near Stourbridge to
produce a copy of the Portland vase. He
did this successfully, and followed it up by
producing his ‘Milton’ vase and later his
famous ‘Pegasus’ or ‘Dennis’ vase, com-
missioned by Thomas Wilkes Webb,
which is illustrated here. Members of the
Northwood School included his own son
John II, who produced works in the
cameo technique. During the early years
of English cameo glass, (.1870 to 1880,
pieces were carved mainly with hand
tools, and each was normally the work of
an individual artist. To supply public
demand a quicker method for production
had to be found and thus the engraving
wheel came to be used, and the production
became a co-operation between designer,
etcher and engraver.
This new ‘commercial’ production of
English cameo glass lasted roughly from
1880 to 1890, and on the whole the results
tended to be good. Stevens 8c Williams of
Brierley Hill and Thomas Webb & Sons
of Stourbridge produced the greatest
amount of cameo work in this period.
Besides the John Northwood school there
existed a second school of cameo glass
artists at the firm of Hodgetts, Richardson
& Company of Wordsley. The two most
important artists there were Alphonse
Lechevrel and Joseph Locke. Alphonse
Lechevrel, a Frenchman, was taken on by
the firm to instruct a small group of men
in the art of carving glass cameos and was
one of the first to follow John Northwood
in this difficult technique. Lechevrel had
already made his name as a medalist, and
had a good grounding in figure, floral and
geometric designs. A few of his pieces of
cameo glass survive, including the vase
illustrated.
CAMEO GLASS VASE, RUBY BODY
Ctrved by Joseph Locke, New England Glass
Company, U.S.A., c. iMg
Alphonse Lechevrel’s most promising
pupil was Joseph Locke, a perfectionist in
whatever medium he attempted, an accom-
plished glass technologist, a finished pain-
ter, engraver, etcher, sculptor and inven-
tor. When eventually he came to be
employed by Hodgetts, Richardson &
Company he produced his masterpiece,
the second copy of the Portland vase in
cameo glass, exhibited at the Paris Exhibi-
tion in 1878, where it won the Gold Medal
Award. Locke left Hodgetts, Richardson
& Company to work for Phillip Pargcter of
the Red House Glassworks, who had the
Northwood version of the Portland vase.
He went on to Webb & Corbetts, and then
left lor America in 1882 where he joined
the New England Glass Company of
Cambridge, Mass. Hecontinued his cameo
work in America, the vase illustrated being
an example of his work there. Occasionally
he used enamelling to embellish his cameo
work still further.
Carved by George Woodall, late 19th century
Ht. 220 mm (9 in.)
The brothers George and Thomas Woodall
had the good fortune to receive their early
training in cameo work from John North-
wood. Both were engaged by the firm of
Thomas Webb & Sons of Stourbridge to
work exclusively on cameo glass. The
Woodall school is noted for being by far
the most productive of the three schools
of English cameo glass. George had a
natural talent for figure composition, as
did his brother, though Tom seemed to
prefer decorative and floral patterns and
often executed the borders on their joint
works, usually signed ‘T & G Woodall’.
The early works of George Woodall were
mainly hand-carved, and his later pieces
mostly worked on the engraver’s wheel.
Much cameo glass was produced under
his direction by a large group of workers.
Tom and George Woodall and James
O’Fallon were the designers, though some
of their workers were quite capable of
producing and executing their own de-
signs.
‘lace-de-boheme’ cameo glass vase
Bohemia, (.1885. lit. 229 mm (9in.)
Most of the English cameo glass produced
between 1880 and 1890 was destined for
the American market. After 1890 demand
for this tine work dropped, because of the
influx of cheap imitation cameo work on
to the market. These cheaper pieces were
made by giving the glass a thin opal casing
and then applying the pattern to this
casing with acid-resisting ink; the article
was then plunged into a hydrofluoric acid
bath, which dissolved away all parts of the
casing not protected by the acid-resisting
ink. Thus an article was easily made with
a flat opal glass design in very shallow-
relief on a coloured background. Still
cheaper imitations came with ‘Florentine
Art Cameo’, and i.ace-dc-Boheme Cam-
eo’ made in Bohemia, which was simply
heavy white enamelling, often copying
English cameo designs, on a coloured or
satin glass body. ‘Mary Gregory’ glass,
described in the enamelling section, was
also a cheaper imitation of cameo work.
CAMEO GLASS VASE IMITATING  CARVED IVORY
WITH APPLIED GLASS WINDOW’S
Designed by Kretschman and decorated in gold and
enamel by Jules Barbc, Thomas Webb & Sons,
Kngland, 1-.1887
Thomas Webb & Sons of Stourbridge,
England, were the sole producers of a
novelty-type cameo glass which was made
in imitation of old carved ivory. Thomas
Wilkes Webb patented the process in 1887
and in the U.S.A. in 1889. An article made
of ivory coloured or opaque white glass
was etched with a shallow relief design,
which was deepened with an engraving
wheel. The design produced was wiped
clean and then rubbed with a brown or
other coloured stain; the stain made a dark
tint in the recesses of the design, and was
also apparent on the high points of the
design. The result made a piece of’cameo’
glass which looked like old carved ivory.
‘Tom and George Woodall used Oriental
and East Indian objets d’art as models for
this technique, and other members of the
Woodall team, Jules Barbc, Jacob Facer
and Nash, produced designs for this ware.
Both Stevens & Williams of Brierley Hill
and Thomas Webb & Sons of Stourbridge,
England, produced a glassware which was
known as ‘Dolce Relievo’ or ’soft relief. A
gather of clear coloured glass was picked
up on a first gathering of opaque white or
ivory-coloured glass, and the article was
fashioned in the normal way. When the
object had cooled, a design was painted on
the outer coloured glass, which was care-
fully etched away. This left various shad-
ings in shallow relief on the white or ivory
background. Any merit that the piece may
have depends entirely on the original
beauty of the design and on the skill of the
etcher. The vase illustrated, made at
Stevens & Williams, is one of the better
examples of the technique. Thomas Webb
& Sons were also responsible for cameo
glass pieces made to imitate 18th-century
Apart from beads, decorative plaques and
models of animals, very little glass was
made in China before the 5th century A.D.
As already mentioned, it is thought that
the secrets of glass-making were brought
to (ihina from the West in A.D. 435. Little
is known of Chinese glass-making during
the Sung and Ming periods. During the
Ch’ing period a glass workshop was
established in Peking in 1680 under the
patronage of the Kmperor K’afig Hsi, and
cameo-cut glass was featured amongst its
products. The most prolific period of
Chinese glass-making, however, comes in
the reign of the Kmperor Ch’ien Lung
(1735-95). The bottle illustrated is thought
to have come from this period, being in
opaque white glass with an overlay of red
glass depicting mounted warriors, build-
ings and nobles in a stage-like setting. The
effect of layered onyx or other semi-
precious stone was thus simulated, for the
Chinese seemed to be only interested in
glass in so far as it imitated more precious
materials.
CAMEO GLASS VASE IN PINK AND WHITE OPAQUE GLASS
Ml. Washington Glass Company, U.S.A., late
iQth century. Ht. 121 mm (475 in.)
Production of cameo glass in the U.S.A. in
this period was limited, not for lack of
expertise, but because of the high cost of
production. A great deal of English cameo
glass was of course being imported to the
States. However, some was made there,
the example shown being a pink and white
cameo of the Mt. Washington Glass
Company, New Bedford, Mass. The firm
also made blue and white cameo glass,
using the same relatively few patterns for
both. The outline of the ‘cameo’ decora-
tion is finely etched, but there any
resemblance to English cameo work ends,
for the decoration is produced solely by
the use of acid, and the effect of the design
is rather flat. On the other hand, some very
notable cameo work was produced in
America by the firm of Louis Comfort
Tiffany with Arthur J. Nash. Frederick
Carder certainly made traditional cameo
glass objects in England, and later, when
he worked in the U.S.A. he invented
Steuben ‘Acid Cutback’ glass, which is
allied to the cameo technique.
CAMEO GLASS VASE
Venice, Italy, last quarter of 10th century
Cameo glass was produced in Venice in the
late 19th century. It is not known who
produced these pieces, but their chief
characteristic is that they are made of
Venetian soda-lime metal, as opposed to
the heavy lead glass of English cameo
glass. This lighter glass, when used for
both the inner and outer layers of the
objects, gives the carving of the cameo a
more delicate but less distinct appearance.
Small details such as the carving of faces
were not easily achieved with the more
brittle metal. These pieces, all apparently
carved by the same artist, are in deep blue
glass cased by white opal glass. They
attempt to copy some of the ancient
Roman cameos, including the Portland
vase. Small alabastrons, vases, large and
small cups and saucers are copied from
ancient examples. The owners of the
cameos, Pauly & Cie of Venice, produced
a few pieces of cameo engraving on leftover
blanks from the late 19th century.
VASE IN CAMEO GLASS
Kmilc Galle, Nancy, France, end of ihe iqth century
I It 44S mm (17-63 in.)
French cameo glass has en entirely different
artistic feel from that of the meticulously
engraved English type. The French glass-
makers used acid etching to engrave their
designs on to blanks of cased coloured
glass, in a style originally intended to copy
oriental models. Emile Galle (1846 1004)
was the most prominent figure in the
production of French cameo glass. He
learned his trade at Mcisenthal, and then
had a more formal art education in Weimar,
followed by studies in the major museums
of London and Paris. He established his
own workshop for glass decoration in 1867.
With his father he began the regular
production of art glass in Nancy in 1874,
and continued until his death in 1004.
Strongly influenced by the art of Japan, he
took as his favourite subjects flowers,
insects and landscape designs, in contrast
to the figure subjects favoured by English
artists for cameo glass.
CASED-GLASS CAMEO VASE IN AUBERGINE,
WHITE
By Emile Galle, Nancy, France, iSgo 1000
The smaller details on Gallc’s cameo glass
were finished off on the engraving wheel.
The majority of his cased glass vases, with
a decoration of flowers and leaves, date
from after 1890. So-called ’standard Galle’
vases with conventional Art Nouveau
flower patterns in one colour against an
opaque white background as illustrated arc-
probably factory products, rather than
Galle’s personal handiwork. It is very rare
to find two identical pieces among the
massive output of his factory. Like most
French glass-makers of this period, he
usually signed his work. Even after his
death, when the factory continued under
the direction of Victor Prouve, the pro-
ducts were still signed ‘Galle’, hut a star
preceded the name, and production in
Gallc’s style certainly continued until
1913. Closest to Galle’s work came the
products of the firm of Daum in Nancy;
this concern was established by Jean
Daum Urol hers, Nancy, Franee, c. 1895
Jean Daum’s two sons, Auguste and
Antonin, were personally influenced in
glass-making by Emile Galle. They soon
(V.i890) began to produce articles decor-
ated with flowers and leaves in cased glass,
using on their works a monogram incor-
porating the Cross of Lorraine. Their
early productions of Art Nouveau glass
were very fine, and they continued to make
art glass until the First World War, but
their later work is of much poorer quality.
Once Galle died, his inspiration seemed to
die with him. Other makers of cameo glass
in Galle’s style were the factory of Lunc-
ville, near Nancy, and also Sevres, which
produced the designs of the firm of
Landier et Fils. Other lesser-known
workers in French cameo glass were De
Vez, Le Gras, Andre De Lattc, Edward
Michel, M. Walter, Alphonse G. Reyen,
Tessire du Motay, Kessler and Mareschal.
The technique of French cameo glass was
copied by many countries in Europe.
i \MH) glass vasi in KM) imhiiihu 111 ysn
By Tiffany, U.S.A., late i<)th century/early 20th
century. Hi. 146 mm (575 in.)
Louis Comfort Tiffany (1848-1933) joined
forces on a shareholding basis with Arthur
J. Nash, an English glass-maker, and other
investors. Nash later brought in his sons
A. Douglas and Leslie Nash. They oper-
ated the factory at Corona, Long Island,
New York, known as Tiffany Furnaces,
and later as Louis C. Tiffany Furnaces
Inc. When Tiffany left in 1924, it became
the A. Douglas Nash Co. Tiffany products
owed much to L. C. Tiffany from 1 he-
design point of view, but it was the Nashs’
practical knowledge of glass-making that
made them technically outstanding. One
of the products that must be mentioned
here is their cameo glass, which generally
consisted of two or more layers of glass.
The designs were painted on in acid-
resistant materials, then the object was
plunged into an acid bath, which revealed
the under layer or layers. The design was
finished off with engraving and polishing
tools.
VASE IN ‘ACID CUTBACK’
By Frederick Carder, Steuben Glass Works,
U.S.A., early 20th century. III. 305 mm (12 in.)
Frederick Clarder of the Steuben Glass
Works, Corning, New York, established
an etching room for glass at the works in
about 1006. He was familiar with the
etching process in connection with cameo
glass from his Stevens & Williams days in
Kngland, and he carved his cameo plaque
‘The Immortality of the Arts’ while
working under the tutelage of John North-
wood. Until about 1932 Carder produced
at Steuben a cameo-type glass which is
called ‘Acid Cutback’ by collectors. The
design was transferred to the glass by
means of a print made on paper in a ‘wax
ink’. The area of the glass not covered with
the pattern was painted with wax, to
protect it from the etching acid. The glass
was left in the acid bath for the time
required to etch the designs to the desired
depth. Two layers of glass were normally
used, the darker colour most frequently
being the outer layer, though occasionally
single-layer pieces were made.
COLOURLESS GLASS WITH CUT
DECORATION
Ireland, late iSth century. Ht. 13(1 mm (538 in.)
(See also colour photograph 21)
Cut Glass: To most people the term means
the type of deep wheel-cutting used on
Irish glass from the late 18th century
onwards, and also on modern cut wine-
glasses and containers. The popularity of
today’s cut-glass products is a legacy of the
great popularity this type of glassware
enjoyed in Kngland and America during
the 19th century. In this style of decoration
angular cuts are made into the vessel
which, when polished, act as prisms with
adjacent cuts, giving a very brilliant effect.
The glass blank would first be marked
with the pattern, a mixture such as white-
lead and gum water being used. Following
the design, deep cuts would be roughed in
against an iron wheel fed with abrasive
such as sand. Water-cooled stone wheels
which need no abrasive might be used to
add fine lines. The cuts could then be
polished by lead or wooden wheels, or,
after the second half of the 19th century,
by plunging the vessel into a mixture of
hydrofluoric acid and sulphuric acid.
waisted bowl in clear, colouri j.s.s glass, stained decanter in cut glass with mushroom stopper
yellow, vviiti cut decoration England, about 1820. Ht. 241 mm (0-5 in.)
Ireland, 1.1820-30. Diam. 143 mm (563 in.)
The years 1780 to about 1835 can be
described as the period of freedom for
Irish glass-making, when the trade was
unfettered by any serious restraints. It was
during this period that some of the most
notable work in cut glass was produced in
Ireland. The principal glass-house cities
were Dublin, Cork, Waterford and Belfast.
The common belief that Waterford glass
has a blue tint is entirely wrong; some
glasses made on the Continent in imitation
of the Waterford style are markedly blue
in colour, but the original Waterford glass
is clear and colourless. Objects made
included barrel-shaped and straight-sided
decanters, bowls and vases, often with a
turned-over rim and a domed foot, covered
bowls and jars with button finials, urns,
kettle-drum bowls, plates, bowls and
stands, ewers with swan neck handles, jugs
with rounded bodies, and serving dishes.
The cut decoration was mostly done by
English craftsmen, who emigrated to
Ireland after Free Trade had been de-
clared in 1780.
The historical impact of early 19th century
English cut glass can be compared to the
influence on glass-making that Venice had
in the 16th century or to that of the
engraved glass of Central Europe in the
17th and 18th centuries. The inability of
the Venetians, with their lighter soda-lime
metal, to copy cut glass led to their eclipse
as the main glass-making centre at this
period. The success of the French and
Belgian factories in copying English cut
glass was a main cause for their develop-
ment in the first half of the 19th century.
The United States of America quickly
took to cut glass, and even in Central
Europe the style could only be partially
resisted. Mitre-cutting, or the cutting of
V-section grooves into glass, was the
characteristic Regency style. The decan-
ters, like the illustrated one, were mostly
barrel-shaped, with rings applied to their
necks, and usually with ‘mushroom’-
shaped stoppers.
Kngland. probably the 1820’s. lit. 89 mm (3-5 in.)
in m dish i\ tit GLASS
Kngland. about 1820. Length 219 mm (8-6? in.)
The V-section grooves of the mitre-cutting
were usually in straight lines. The main
decoration on the glass was caused by the
intersection of these grooves at ninety or
forty-five degrees. The simplest decora-
tion, when the grooves met at ninety
degrees, was the production of a field ol
plain ‘diamonds’ or small pyramids of
glass. There were many variants of this
sort of decoration, but one of the most
popular was the field of intricate ’straw-
berry diamonds’ found on so many pieces.
The bowl illustrated is a typical example.
Since the middle of the iSth century the
geometrical cutting of the soft English
lead glass had absorbed many glass decora-
tors, but it was the styles of the early 19th
century that were to establish its lasting
popularity. Regency cut glass was in fact a
logical technical development from the
shallow facetted glass of the mid-i8th
century.
Regency cut glass subordinated the shape
of the vessel to the decoration. Its solidity
and sparkling appearance reflected the
ostentation that was prevalent in all the art
forms of the British Regency and Con-
tinental Empire styles. In addition to the
square-cut patterns, other designs on
vessels involved the use of radiating cuts.
Usually the base would be ’star-cut’, and
the edge of the vessel might have ‘fan-
cutting’ on each of a scries of semi-circular
projections. This can be seen in the oval
cut-glass dish illustrated. It is strange that
this style of decoration, which needed such
thick glass for its execution, should coin-
cide with the period of the Glass Excise.
Between 1745 and 1845 the various
governments sought to gain revenue by
taxing the glass output in England.
Strangely enough, the effect of the Excise
seemed to be the concentration of all the
glass-makers upon one current style of
clear glass with cut decoration.
The Techniques of Taking Away
Early 19th-century glass shapes can norm-
ally be distinguished from their late 18th-
century forerunners by their heaviness and
formality. The cut decoration was more
often arranged horizontally than vertically.
This is apparent on the cut-glass dish with
cover that is illustrated. It has generally-
been assumed that most cut glass was
made in Ireland, where until the mid-
1820’s there was no Glass Excise tax. This
cannot in fact be true, since there were
never more than ten factories in Ireland
producing decorative glass, whereas in
England they numbered about fifty. Apart
from a few special cases, it is virtually
impossible to distinguish between English
and Irish glass on the grounds of style or
of the glass used. When the Excise was
introduced into Ireland in 1825, that
country was producing Ј20,000 worth a
year of flint glass, compared with over
Ј20,000 worth in Scotland and Ј170,000
worth in England.
The tendency to call all cut glass ‘Irish’ or
‘Waterford’ probably reflects the way
research has been made into the subject.
Much has been written on the history of
the Irish factories in the early 19th
century, but very little has been done on
the much wider field of English cut glass
in this period. Wine-glasses or ‘rummers’
of the early 19th century in England
usually had convex or straight-sided bowls.
Short bucket shapes were common, as
well as the taller flute shape illustrated.
Stems were short, often with disc-shaped
knops. The intersecting mitre cutting used
so much on other vessels was considered
unsuitable for drinking glasses, so their
decoration usually consisted of flat vertical
facets towards the lower part of the bowl.
Jugs had become a popular form of glass-
ware but in Regency times they tended to
copy pottery shapes and did not have the
fluidity of form of true glass art.

LONG AND LIGHT EARRINGS
Right: A pair of gold repousse and turquoise pendent earrings, circa 1840. Turquoise and carbuncles in association with gold repousse work were particularly favoured at the time.
Below: A portrait miniature of a lady, by Leopold Grosz (or Gross), circa 183o. Note the fashionable coiffure with hair arranged in three clusters of curls expanding sideways, counterbalanced by cannetille earrings en girandole.
Bottom: Two pairs of repousse gold earrings, circa 1840, one with carbuncle the other with polychrome enamel.
Left and below: Four pairs of pendent earrings, set with citrines and pink topazes, circa 1835, characterized by the combination of cannetille and repousse work which marks the transition between the two goldsmith techniques used in this type of earring.
Typically all the earrings illustrated on these pages are long, light, set with semiprecious gemstones or decorated with polychrome enamels and of moderate intrinsic value.
Left: Three pairs of pendent earrings circa
I 870-8o, English, set with diamonds or pearl and diamonds. The designs, though more rigid and stiff, are close to the contemporary French examples illustrated above, but their fluttering ribbons and garland motifs are replaced by plain lines of diamonds.
THE 1860s AND 1870s: BIZARRE VARIETY
In the i86os and 187os earrings became extremely popular, and the fashionable lady would suspend virtually anything from her ears providing it was decorative. Objects of common use such as baskets of flowers or hammers, animals and archaeologically
A parure of emerald, pearl and diamond earrings and matching necklace, with the relevant design, commissioned by Napoleon III and Eugenie from the Parisian jeweller Mellerio in 1863 as a wedding gift to Mar6chal Canrobert. The impact of these earrings relies on the use of important gemstones such as the large cabochon emerald drops rather than the explicit archaeological motifs, though the Greek key pattern and the extensive use of yellow gold even for the setting of the diamonds betrays an archaeological interest. Emeralds were the favourite coloured gemstones of the Empress Eugenie and because of this became one of the most popular gemstones of the time.
WAFER-THIN: EARRINGS OF THE EARLY 19TH CENTURY
Right: A portrait of Maria de la Conception Rodriguez of Granada, painted by Jose Gil in 1816. Her earrings, typical of the early i 9th century, are two circular gold plaques set with corals connected by fine chains. Their linearity and two-dimensional quality is well suited to the low d6collet6 and contemporary hairstyle of Classical inspiration.
Above left: A diamond pendent earring, early
i 9th century, showing how the structure of the contemporary gold earrings made of articulated plaques was rendered, almost unaltered, in lavish gemstones such as diamonds.
Above right: Pair of gold earrings, early i 9th century, made of several paper-thin gold plaques of different shapes connected by lateral chains.
Above left: Pair of gold earrings, early i 9th century. Although quite long, these earrings are comfortable to wear because they are cut out of very thin and light gold sheet and not set with gemstones.
Above right: A pair of gold and enamel pendent earrings, probably French, early T 9th century, decorated with portrait miniatures of a man and his wife. Though the design is typical of the
time, this pair presents unusual sentimental imagery: a dove, a pair of flaming hearts, the inscription ‘Fidel’ and forget-me-nots.
TORPEDO-SHAPED DROPS OF THE
1830s AND 1840s
Opposite and below: Three pairs of gold, chalcedony and gem-set pendent earrings, each accompanied by a typical Maltese cross pendant en suite, circa 1830. Contemporary fashion encouraged the use of such elongated drops decorated with applied gold floral motifs, often set with turquoises or other coloured gemstones. They were carved in white or stained chalcedony, usually blue or green.
Right and far right: Two examples of repouss~ gold earrings of elongated drop design, circa 1840, the first applied with turquoise florets, the second decorated with quatrefoil motifs suspended from a shell-shaped surmount. Earrings of this type were usually made of thin foils of metal decorated en repousse and extremely long (i0-12 ems). Their size and lightness were dictated by fashion and economic factors. The exaggerated horizontal lines of dress and hairstyle needed to be offset by long pendants, while at the same time the scarcity of precious metal encouraged the use of wafer-thin foil of embossed gold.
Below centre: A gold and gem-set torpedo-shaped earring, circa 1835, combining embossed and cannetille decoration.
FROM CANNETILLE TO REPOUSSE
Left: Two gold cannetille, diamond and gem-set parures, English, circa T 830. In both cases the parures include a pair of earrings set with rubies and emeralds respectively. Though the design is that of the traditional girandole, the setting in cannetille is typical of the time, the design of the earrings matching those of the necklace
pendants. On the Continent canetille earrings were mainly set with semiprecious stones such as foiled topazes, amethysts and citrines. In England more expensive gemstones such as emeralds, diamonds and rubies were often used.
Right: An exceptional pair of pendent earrings set with aquamarines within repouss~ gold borders, circa 1835. These earrings are typical of the time for their length (12 CMS approximately), for their lightness (15 grams) and for the choice of the stones, two large kite-shaped aquamarines. The lightness of the mount makes them comfortable to wear in spite of their size. Gold repouss~ work replaced cannetille because it was cheaper to manufacture and used small quantities of precious metal.
EGYPTIAN AND CLASSICAL STYLE
Above: An impressive pair of gold earrings and matching necklace, circa I 870. The dominating element of these jewels is the pharaoh mask, so the Egyptian inspiration is sufficiently obvious. Nonetheless the surmount is Classical Greek, a rosette; I 9th-century revivalism was often the result of such combination of elements deriving from different cultures and periods.
Opposite:
A group of Classical revival earrings, circa 1865. Top left: laurel leaf suspended from an Athenian owl surmount. Top right: A pair of gold rams’ head earrings, deriving its design from Greek examples of the late Classical period, the antique counterparts usually consist of a tapered hoop to be inserted into the earlobe terminating with a rams’ head motif, in this case the rams’ head is suspended from a rosette surmount. Below left: A pair of gold and cornelian intaglio earrings, by Castellani, incorporating original Roman intaglios that depict a trophy of arms and a hunting scene. Below right: A pair of gold pendent earrings, by Ernesto Pierret, each designed as a triangular panel decorated with beaded work and corded wire typical of Greek and Etruscan goldsmithwork, flanked by baton motifs with spherical drop terminals.
Opposite: Two pairs of Roman earrings, circa 1870- The first by Civilotti of Rome, combines elements from various sources. The amphora motifs in matt gold find precise counterparts in Greek and Etruscan examples, the gold mosaic plaque with its Christian symbolism is reminiscent of Byzantine mosaics, while the lilies of the circular surmounts belong unmistakably to the i 9th century. The second pair, of gold and Roman mosaic, carry lozenge-shaped plaques with portraits of Sabina and Maximus Caesar. Note in this case the contrast between the sober, classical lines of the pendant and the frivolous design of the floral surmount.
Above: A pair of gold and enamel pendent earrings, circa 1870, in the shape of stylized amphorae. The design has no specific counterpart in Antiquity but is a pastiche of various elements. The amphora motif derives from a popular type of Hellenistic earring; the granulation and corded wire decoration from Greek and Etruscan tradition; and the stylized papyri and palmettos in bright contrasting colours are Egyptian.
Left: A pair of gold and Roman mosaic earrings, circa 1870, in the shape of ewers. The gold chains with pearl terminals are meant to simulate water being poured out — an amusing i 9th-century touch not to be found in Antiquity.
A RANGE OF REVIVALS: THE 1870s
Many Classical designs took the amphora as their model, in, for instance,
tortoiseshell (right) or lapis lazuli (below right). Rams’ heads feature as a pair of gold earrings (below).
Above: Gold and enamel a baule earrings in the Etruscan tradition, seen in front, back and side views. Right top left to bottom right: Hardstonc maenad heads set in elaborate gold and enamel mounts; gold rosette; Wedgwood jasper-ware drops decorated with a white figurative frieze on a blue ground; two earrings based on amphorae in matt gold; and finally a pair of Japanese-influenced gold and polychrome enamel earrings designed as fans on screens.
LIGHTHEARTED EARRINGS OF THE 1860s AND 1870s
Common features of these earrings are a playful naturalistic inspiration, the use of relatively inexpensive material such as gold, enamel, ivory and turquoises, and the combination of bright colours. They are in line with the concept of novelty jewellery, more a fashion accessory —hence the low value of the materials — than precious heirlooms to be treasured.
Left-hand column
Above: A pair of gold and turquoise pendent earrings in the shape of bulrush sprays, the heads pave-set with turquoises. English, circa i 86o.
Below: A pair of gold and enamel earrings, French, circa 18 70, designed as birds nesting in bulrushes.
Centre column
Above: A pair of gold and tinted intaglio earrings, English, circa 1870, depicting goldfish in round bowls.
Middle: A pair of three-coloured gold and enamel earrings, probably French, circa 1860, designed as coiled snakes supporting bunches of grapes.
Below: A pair of gold and enamel earrings, English, circa 1870, in the form of frogs amongst bulrushes in a triangular frame of twigs.
Right-hand column
Above: A pair of gold and tinted ivory earrings, English, circa 1860, designed as cascades of fuchsia blossom carved in tinted pink ivory.
Below: A pair of silver-gilt and turquoise earrings in the form of nesting birds pave-set with turquoises, the wire-work nests containing pearl eggs, French, 18.50-60.
FASHIONS OF THE 1870s
Above: Five designs for earrings from the archives of Mellerio, Paris. Their variety is a reflection of the eclecticism of contemporary jewellery design.
Noticeable, however, is the persistence of motifs of archaeological inspiration such
as the amphora-shaped drops, the cameo supporting a trophy of love and stylized papyri.
Opposite: Among the earrings of naturalistic inspiration fashionable in the I 870s, those designed as acorns found great favour throughout Europe. In Mellerio’s archive are two variations of the same design (below), while similar earrings with a matching pendant are advertised in a contemporary issue of the magazine La Femme et la Famille.
Right: Stylized papyri also form the surmount of this English gold and turquoise earring.
RETURN TO NATURE
During the i 86os women suspended all sorts of ornaments from their ears, from delicate and appealing bouquets of flowers to rather repulsive Brazilian beetles.
Far left: Two pairs of Italian gold earrings, i 86os. The upper pair, set with pearls, has rather disturbing hands supporting a basket of fruits. The lower pair consists of acorns on a two-oak-leaves surmount.
Left: A pair of gold and stained ivory earrings designed as cascading fuchsia blossoms, English, 18 6os.
Above: A pair of Brazilian beetle earrings, English, i 86os. The improved communication with South America prompted the introduction of unusual materials such as Brazilian beetles, whose hard, brilliant and iridescent green shell could be mounted as a gemstone.
EROS, AMPHORAE AND OIL LAMPS
Variations of amphora- and lamp-shaped earrings, circa 1870. Left: A mask of a Maenad supports an amphora carved in lava from Vesuvius, and a pair of gold, enamel and pearl earrings in the shape of oil lamps, by Carlo Giuliano, circa ‘865, modelled on lamps used for votive offerings. Below: a pair of gold earrings designed as amphorae suspended from fine chains; a gold ewer-shaped earring decorated with corded wire and granulation; and a seed pearl, gold and banded agate earring designed as an amphora on a disc surmount, by Carlo Giuliano, bearing the maker’s mark C.G. and the retailer’s mark HR for Hunt and Roskell of London
Eros, or Cupid, a recurrent figure in Hellenistic earrings, appeared frequently, involved in various activities, in earrings of the 18 6os and 18 70s. In two examples (above right) he is riding a gold dove decorated with corded wire and granulation simulating the plumage; the lower pair retains the original fitting, very close in design to the Antique prototype, while the upper is a later alteration.
In a pair of gold and enamel pendent earrings by Eugene Fontenay, circa 1870 (above), Eros is depicted carrying wine jugs on painted enamel plaques imitating Roman wall paintings, while in a pair of gold, seed pearl and enamel earrings by Carlo Giuliano, last quarter of the i 9th century (bottom right) he is playing the lyre and holding a mirror, on circular enamelled plaques.
Left andfar left: Two pairs of earrings set with cameos carved respectively in lava and banded agate, circa 1870.
RENAISSANCE REVIVAL
A pair of gold and polychrome earrings, by Carlo Giuliano, circa 1865, designed as a stork devouring a snake. The subject derives from a Renaissance emblem — the soul overcoming carnal pleasures — and the interest in the sculptural effect from Renaissance jewellery.
Above: A pair of gold and Roman mosaic earrings and matching brooch/pendant, the surmounts of the earrings depicting red, green and white scarabs supporting three elongated drops.
Left: A gold and Roman mosaic pendent earring, the circular surmount decorated with a dolphin and supporting an elaborate drop decorated with the figure of Cupid.
ROMAN AND FLORENTINE MOSAICS OF THE 1870s
Roman and Florentine mosaics, widely exploited in jewellery at the beginning of the i 9th century, came back in great favour in the late i 86os. Roman micromosaic technique was especially favoured, not only because it was suited to render motifs of archaeological
inspiration but also because its technique derived from Antiquity. This consisted in arranging minute coloured glass paste tessarae within hardstone, glass or gold borders.
Left: Gold earrings of archaeological design decorated with Roman mosaic plaques of winged putti, and a brooch/pendant showing a Raphael tondo.
Below left: A pair of Florentine mosaic earrings set with onyx and coloured stones. Florentine mosaic consisted of an inlay of differently coloured hard and semiprecious stones arranged in naturalistic patterns.
Below centre: A pair of gold and Roman mosaic half-hoop earrings in Egyptian revival style. Note the scarab, similar to the example illustrated on the opposite page.
Below right: A Roman mosaic earring of floral design.
SOUVENIR EARRINGS
Since the beginning of the century earrings and other jewels set with Roman mosaic plaques depicting architectural views of Rome or scenes from the Campagna had been popular souvenirs to take back home. Early i 9th-century earrings are characterized by a very simple and linear design. They usually consist of an oval surmount supporting a pear-shaped drop or an oval plaque connected by fine chains. The mosaics are of a high quality, consisting of very small tessarae where the colours are graduated in a very subtle manner giving the illusion of a miniature painting. A good example of this is the pair of earrings (left) set with four mosaic plaques of famous views of Rome including the Pyramid of Cestius and the Columns of Trajan and Antoninus.
Later examples of the 18 6os and 18 70S tend to be more elaborate in design, adapting shapes and decorations to contemporary trends. The quality of the mosaics though, is coarser, a consequence of the increased demand. The earrings and matching pendant (right) with mosaic plaques depicting peasant women of the Campagna in the typical ciociara costume are good examples of the time; their Roman origin is confirmed by the city’s gold hallmark. Note the ubiquitous Egyptian scarab motif on the surmount and the coarse tessarae.
Star motifs first appeared in the late i 86os as an inlaid central decorative motif of earrings set with large cabochon gemstones such as amethysts and carbuncles or enamel bosses as the example illustrated here in black enamel and half pearls (far left). Later six-, eight-, twelve-pointed stars, or more, became extremely popular, often accompanied by a matching pendant and set for instance, with pearls (left).
The popularity of knife-wire setting and the fashion for light and less symmetrical shapes prompted, in the late 18 8os and i 89os, the development of shooting stars and comets.
Opposite centre and far left below:
Numerous points alternate with weightless knife-wires set with diamonds. Left: A pear-shaped drop terminating with a graduated fringe. Above: Set of twelve-pointed star earrings and matching pendant set with pale opals.
Top right: Designs by Mellerio for two variations of star-shaped pendent earrings, part of a parure commissioned by Queen Isabella II of Spain.
INNOVATION AND TRADITION:
FRENCH EARRINGS OF THE 1870s AND 1880s
Two pages of earring designs in pencil and gouache of the late 1870s and early i 88os from the archives of Mellerio, Paris. They range from naturalistic floral creations to pendeloques and girandoles in the i Sth-century tradition, mainly set with pearls and diamonds, together with amusing arrows which appear to pierce the ear, in the style of novelty jewellery. The eclecticism of the sources of inspiration is especially evident on the right-hand page, where Classical archaeology with a typical Greek key pattern, naturalism with floral motifs, Persian and Northern African art with botch and crescent hoops co-exist.
Above: A collection of gold and gem-set earrings spanning the years from 1850 to the 1870s. Noticeable are the small compact earrings of the I 850s designed as clusters of foliate motifs or coiled ribbons; the long pointed drops of the 18 6os in archaeological revival style; the oval panels star-set with half pearls of the early I 87os, and the tiger’s claw earrings fringed by gold drops of the I 870s, brought back from India as souvenirs to commemorate hunting expeditions.
Left: A page of earring drawings from Cartier’s archive in Paris, dated from March 1874 to May 1874, illustrating some of the great number of shapes, both long and short, fashionable at the time.
FRINGED EARRINGS OF THE 1870s
One of the most distinctive forms of earring in the
18 70s consisted of a circular, oval or otherwise shaped panel variously decorated with enamel, gemstones or chased gold, supporting a graduated fringe of articulated pointed drops. The type was particularly fashionable in England where the favourite surmounts for the tagged drops were oval carbuncles (below), or enamel plaques star-set at the centre with various gemstones (opposite). Fringe or tassel earrings with matching pendants were popular throughout Europe as testified by the archival records of the German jeweller Kreuter dating from 1868 to 1872 (right). More unusual surmounts were occasionally exploited, such as the trapeze-shaped Wedgwood jasper-ware plaque (opposite lower right).
CASCADES OF FLOWERS
Among the plethora of 1870s earrings those designed as cascades of flowers, flowerhead clusters with pampille decorations or sprays of leaves and flowers were particularly favoured by a more conservative public.
Far left, top: A pencil and gouache drawing by Mellerio depicting a flower spray earring. It is interesting to note how the design includes the ear to show precisely how the earring should be positioned on it. Beneath it are two ink designs by Mellerio in the form of flowers with
cascading stamens.
Left: Two ink drawings by the German jeweller Kreuter of 1873, depicting earrings in the shape of cascades of flowerheads and leaves.
Lower left: A gold and turquoise demi-parure comprising a pair of fuchsia earrings and a matching pendant. Note the naturalistic rendering of the blossoms and the use of calibr~- cut turquoises. Though turquoise had been a popular stone for many decades it is only in the
i 870s that it began to be cut en calibre in order to fit the shape of the mount.
Opposite: English diamond-set examples belonging to the same type as those by Kreuter.
BEETLES AND BACCHUS
A gold and Brazilian beetle demi-parure comprising a necklace and a pair of pendent earrings of modified girandole design, probably English, circa 18 70. In this case a ‘novelty’ material — the Brazilian beetles — is combined with an overall archaeological design in a bizarre and unconventional way. The iridescent green beetles are turned into miniature tortoises by the addition of feet, head and tail in gold; on the earrings they are clustered in groups of four.
ARTISTRY OF LALIQUE
Right: A pair of opal, enamel and gold pendent earrings, by Rene Lalique, French, circa I goo, in their original case. The fluid line, the thistle motif, the choice of the opal as a gemstone and the opalescent enamel epitomizes Art Nouveau jewellery. Though earrings continued to be worn at this time, they were not a particularly prominent ornament so the large proportions of this pair of Lalique earrings are an exception rather than the rule. Even within Lalique’s unconventional and daring production of jewellery, they may be regarded as a rarity. The back view (bottom) shows the unusual clip fitting which anticipates the fashionable clips of the thirties.
Upper left: A collection of very simple and relatively small earrings typical of late i gth century and of the very beginning of the loth century. From left to right: A peridot and diamond cluster earring, the large peridot claw-set at the centre; a diamond earring simply claw set with a brilliant-cut stone; a carbuncle (cabochon almandine garnet) and rose diamond cluster earring, probably by Boucheron; a diamond earring designed as a circular cluster of table-cut stones.

Tables, Dressers and Sideboards
Medieval boards and trestles—survival of the term “board”—the Tudor refectory table—pull-out or draw-leaf tables—the cre• dence and origin of the gate-leg table—long period of the gate-leg—occasional joined tables-18th-century patterns with club legs—the composite “D” end table—tripod tea tables with dished and pie-crust tops—dating by shape of feet—early games tables-18thcentury card tables–Sheraton quartette or nest tables—variations of the Pembroke style—sofa tables and early 19th-century folding tables—early dressers—dressers developed from side tables—Welsh dressers—appearance of the sideboard—Victorian chiffoniers mason’s patent ironstone china .
In the communal life of medieval times the servant ate with his master and his place at the table was a kind of status symbol regency revival furniture . The master would sit at the head with his guests and family; next would come the retainers of importance such as the steward and the priest and finally the servants expensive antique plates . Accordingly the table was a very long one and as the great hall was also used for recreation and even for sleeping the table had to be constructed so that, in spite of its size, it could be easily dismantled and put to one side when not required furniture+scallop+wheat .
Tables of the Gothic period were referred to as boards and trestles and were made in a variety of styles edwardian c19th construction buildings . Sometimes the supports were as those illustrated in the Luttrell Psalter and later they took the form of pedestals french words for dinner stand . Until the middle of the 16th century the table top consisted of a massive board of oak or elm boards nailed together 1600 century scroll back chair . When laid over the trestles or pedestals the very weight preserved its stability table consoul antiques caried or gold “rococo” . Even to this day, landladies advertise “board and lodging” and we still speak of a board of directors, a board room and a board of governors flemish trestle table . It is interesting to note how this term, used to describe a council of men and women meeting around a table, is a survival in our language from a very distant past catherine the great of russia plates .
By 1550 the communal life of the hall had begun to disappear john bell, porcelain, value . Houses were being built with a greater number of rooms and master and man took their meals apart kent silversmiths bread basket . There was no longer a need for the long trestle table and so a smaller table with a permanent underframe and legs was taken into general use writing cabinet officers antique . It was probably a smaller adaptation of the joined tables used in the abbey refectories and nowadays the term, refectory table, is used to describe it, although it was a purely domestic piece of furniture types of bureaux .
The refectory table, which was in everyday use from about 1550 to 1660, was usually 8 to 12 feet in length art deco brass stool . It was stoutly constructed with four, six or eight legs with bottom rails between them, and the top permanently fixed 19th century chairs’ . The underframing was made of oak but the top was often of elmwood, because of the wide boards which could be obtained from that tree antique neoclassical .
During the reign of Elizabeth I a variant of the refectory table, known as a draw-leaf table, appeared on the scene earthenware mixing bowls antique with handles . It enabled a comparatively short table to be extended to nearly twice its length by pulling out under-leaves from both ends dinnerware silver tureen . It was a design introduced from Flanders and France and it enjoyed an equal popularity with the refectory table botanical whimsies are considered some of the finest examples of art nouveau glass . Both of these types were displaced by the gate-leg table after the Restoration but the draw-leaf table has been revived during the 20th century and many modern homes possess similar, but lighter versions of the Elizabethan prototype steel dining table germany .
During the second half of the 16th and the early years
of the 17th centuries, table legs were massively made and often took the form of heavy bulbous turnings english creamware marks . On Flemish tables these swollen shapes are often spherical, like a melon, but the English versions were considerably more elongated with rounded tops and bottoms dresden german antiques . It has been said that these bulbous legs were functional in that they were designed to prevent rats climbing on to the table tops ant cherry antique dictionary tables . I have it on good authority from a biologist friend that any self-respecting rat could easily leap on to a table without any climbing aids 19th century gothic bedside tables .
Between 1600 and 1630, a small but sturdily constructed kind of side table was developed antique chippendale “solid mahogany” dining table lions paw . It must be considered a somewhat rare example of early Stuart furniture as examples these days are seldom encountered ernst archibald furniture . The tabletop was of the folding type, that is, it consisted of two halves hinged together and normally kept closed cherry ladies writing desk by pennsylvania house . When required for use, the upper leaf would be opened outwards and this would be supported by a fifth leg, which could be swung out as in a gate-leg table serpentine pembroke table . Actually, this small table was the forerunner of the gate-leg pattern turkish style sideboards uk . It is sometimes referred to as a credence table, which was placed at the side of the altar in the churches and on which the wine vessels and plate were arranged for use in the Communion service antique “trestle table” kent .
The gate-leg table, as already mentioned in Chapter 1, became generally fashionable after the Restoration and, in one form or another it is the one type of table which has been in continuous service ever since art deco polished matte lost-wax castings o nude women in bronze by viennese artisans . Usually made with a gate on each side, some larger tables are to be found with quadruple gates “art deco dresser” and “marble top” . These were of the period when spiral twist legs were in vogue and were made of walnut or, occasionally, of oak louis xv antique french commode .
A small type of side table, with a drawer and bobbin turned or baluster legs, must have been made in large numbers towards the end of the 17th century as they are frequently to be found in sale-rooms and antique shops antique music cabinete with mirror at the top . The finer versions are sometimes veneered and have curved stretchers as illustrated in Chapter 2 federal style table with brass paws . A more common and probably country-made variety is the so-called tavern table with its top overhanging the ends to a more than usual degree trent potteries designs by george jones . The drawers of these tables are sometimes found with joiner’s slides on the sides porcelain wincanton .
After being generally adopted as a dining table during the Restoration period, the gate-leg table was given a variety of leg shapes over the next hundred years rene lalique nude woman art deco lamp . Baluster and spiral twists gave place to scrolled legs and eventually to a type of cabriole shape known as the club leg italian,furniture,maker,address . Except for use on extending card tables, the cabriole leg was not ideally suited to larger table design, but the club leg variation remained in vogue until the introduction of the Chippendale square leg and the tapered legs of the Adam and Hepplewhite eras deco style dressing table .
It was customary during the late Stuart and William and Mary periods for a host to seat his guests at several gate-leg dining tables if the company was a large one sheffield rote iron . By the mid-18th century, however, long mahogany dining tables at which all the company could be seated, began to appear in the more important households antique wood cutlery urns . For over fifty years, these long dining tables consisted of one or several gate-leg tables, with rectangular side-leaves, which were joined together and semi-circular “D” end tables were placed at each end to make up the piece ruhimann table . The wide mahogany boards, introduced during the previous decades, rendered the construction of the broad table-tops a relatively simple matter antiques antique oak sideboards dutch style .
When only a few people were at dinner, the “D” ends would be placed against the wall to serve as side tables and only the gate-leg would be in use new york antiques light art deco . These “D” end tables are quite often to be seen in antique shops, either singly or in pairs, and it is not always realised that they have originally been part of a long Georgian dining table antique mahogany handkerchief table . When placed together, a pair of these tables make a very attractive circular dining table, which would be admirably suited to a present-day flat or smaller modern house http://antcollectors.com . The long “D” end tables continued in use well into the 19th century but the tapered legs were in time replaced by centre pedestals, each supported on four long curved feet antique furniture spanish art nouveaux . These were usually reeded and had brass-capped ends with castors or brass leopard-paw ends wheat antique dresser .
Designed during the closing years of the 17th century, but not becoming generally popular until fifty years later, the small, snap-top, tripod table with a circular top is probably one of the commonest pieces of antique furniture to be found today walnut escutcheons . The hinged top of the simpler country-made examples is usually flat but a tea table with a dished or slightly hollow top is not uncommon reproduced oval shaped dinnig table with lion’s paw . The dished top was designed to prevent spilt tea or milk running over on to the carpet campaign furniture pottery furniture . A more elaborate type of the dished top was known as a pie crust early 19th century mahogany desks with lion feet . Here the edge was carved into a series of scallop shapes, but genuine pie-crust tops are rare and there are many reproductions about value of george iii english mahogany gateleg card table? . Some tripod tea tables have an open, box-like structure fitted underneath, known as a birdcage and into which the single, central pillar is made to fit dutch silver 17th century . With this device, the table top not only folds upwards but can also be rotated so that any dish upon the table may be brought within reach of the guests period antique mahonany dining table with lions paw pedestal legs .
It is possible to date a tripod table, to within twenty years, by the shape of the feet tilt-top birdcage tea table . As illustrated on p small antique pembroke table fold-over . 63, the feet of around 1750 to 1770 have a flatter curve with a wider spread, while those of 1770 to 1790 have a more pronounced hump at the knee antique imari porcelain . From 1790 to 1810 approximately, the curve of the feet was reversed and by the time of the Regency, slender, concave shaped feet had been introduced toilet habits during 1800th century . The early Victorian period saw the revival of the “S” shape, but this was usually rather thick in proportion and decorated with elaborate carving bassano maiolica .
Tables which were specially designed for playing games were rare during the 17th century but an interesting piece, known as a shuffleboard table, is sometimes to be found in the long galleries of our greater country houses 18th century antique american gateleg . The long galleries were built for leisure and relaxation so that during the winter months, while the gentlemen went hunting, the ladies could take more gentle exercise indoors dressing table with small tables . The shuffleboard table can best be compared with a shove-ha’penny board, save that large brass discs were used instead of coins and the table top was often very long rh vase austria . There is one at Astley Hall in Lancashire which has twenty stout legs and is 2712 feet long jennens and bettridge . It must have been prefabricated and then assembled in the long gallery as it is far too large ever to have been brought up the staircase in one piece botanical antique ceramics collectors .
During the reign of Queen Anne and the Georgian period, card games were extremely popular and folding top tables with cabriole legs were in general use during that time finmar alvar aalto stool . These tables were, mostly made of walnut and had small recesses near the edges of the top to hold the guineas or counters while small circular platforms were provided at each corner to hold candlesticks for the night’s play fashion in the 16th century netherlands .
Card tables and tea tables, particularly the folding, semi-circular variety with tapered legs, were made to an almost identical pattern, the only difference being that the games tables had inset baize tops while the tea tables were of polished wood how a goldsmith made a candlestick . The early 19th century saw the production of many small games tables with tops inlaid for chess and backgammon and with drawers beneath to hold the apparatus for the games end tables lions head table with brass eagle claws on legs .
To Sheraton must be given the credit of designing the nest of tables, the idea for which appeared in his Cabinet Directory in 1803 antique kidney shaped dressing table . The nest comprises four small, separate tables which all fit one under another splay leg sofa table . They were originally referred to as quartette tables and being very lightly con-structed and somewhat fragile, it is uncommon to find an original, complete set of four istoriato china . Luckily, I have such a set in my possession which I believe was made by Gillow of Lancaster old gateleg wooden drop leaf tables . It was salvaged from a second-hand furniture shop, the tables being scattered around among the jumble and the shopkeeper having no idea, apparently, that they formed a unique set kakiemon bow price .
Small Pembroke tables with side flaps supported by hinged brackets and said to have been designed originally at the request of the Duchess of Pembroke for occasional use, appeared about 1775 mahogany french dining chairs . They were common in late Georgian homes and in the early part of the 19th century a larger version was made to serve as a supper or breakfast table rectangular drop leaf table antique .
Sofa tables were designed to stand behind a sofa and to carry such things as reading and writing matter, trays of refreshments and candelabras rococo display cabinet . A few years ago, they were fairly common but are now in such great demand as bedroom dressing tables, that they have become a somewhat rare and expensive item pop up cigarette deco dispenser .
The Regency and early Victorian periods saw a vast number of tables with folding tops, made to stand on a central pedestal with three or four feet value of clawfoot cabriole legged dressing table? . In this type, the double top, when opened out, could be rotated so that it was supported by a rectangular underframing odiot tureen . These tables were used for games, writing, serving tea and a whole host of leisure activites french scrolling art nouveau style chairs .
A necessary adjunct to every dining room is a sideboard and to every kitchen or living room, a dresser trestle draw leaf table . The sideboard, as its name implies, was a small side table in those far off days when a dining table was referred to as a board gateleg drop leaf table 19th century . As the piece of furniture we know, it did not appear until the second half of the 18th century 18th century french fashion . The dresser, on the other hand, is of far more ancient lineage and in the painting of the More family by Holbein, referred to in Chapter there is shown in the background a high-backed, canopied Gothic dresser, or, as it was called in that period, a dressoir dutch rococo walnut cupboard . These dressers were really related to the cupboard or buffet and further reference will be made to them in the chapter on Cupboards vintage porcelain plate with brass pedestal .
Dressers with a high back were out of fashion during the early Stuart and Commonwealth times but there were two simpler types in general use aaron burr antique furniture . One was made in the form of a long, narrow side table with three or four deep drawers refectory tables trestle . It stood on four or six legs and had an under shelf, as wide as the dresser top, near the floor level antique epergne glass . This was, no doubt, used for the display of brass and copper ware what were wood tables with porcelain tops used for . The other type was a development of the chest and presented a more solid appearance, the entire front being filled with drawers and small cupboards demilune chiffonier . This second kind of dresser was not generally adopted until after the Restoration but both types were used then until the end of the 17th century drop leaf table with lion claw feet .
By the beginning of the Georgian period most dressers were fitted with a set of plate shelves which stood at the rear of the dresser top poole pottery est. 1873 . This version was usually referred to as a Welsh dresser and while it may have been popular in the Welsh farmhouse kitchen, it was undoubtedly made throughout Britain during the 18th and 19th centuries drop leaf table with spiral turned legs . Occasionally dressers are found made in walnut but more frequently in oak with the edges of the drawer fronts and the cupboard doors cross-banded in walnut or mahogany antique cabinets coat of arms .
Long sidetables were normally used as sideboards in early Georgian dining rooms and on these would be placed the knife and fork boxes with the cellaret for wines underneath antique french ormulu furniture . It was about 1775 that the first sideboards were designed with drawers for the silver and cutlery and deep cupboards on either side to hold the wines boulle table . Sheraton is supposed to have added the low brass rail with a small silk curtain at the back to the designs for bow-fronted sideboards, which had originated during the Hepplewhite period goldscheider staffordshire myott .
In Victorian times, some monstrous sideboards were created with the addition of the most elaborate carving chamber pot cabinet . In the great dining room at Charlecote Park, near Stratford upon Avon, there is installed such a piece of furniture with carved effigies of every variety of edible fish, animal and fowl hanging in great swags from every point and corner chestnut tables antique . This monument to the questionable good taste of the Victorians is all meticulously worked in varnished oak, a spectacle which must have made the shade of Grinling Gibbons sadly shake its head turn a silver tray into a table .
On the other hand, it was during the mid-Victorian period that a very attractive little sideboard, known as a chiffonier, made its appearance antique claw foot table . It was equally useful as a sideboard for a small dining room or as a cabinet for a drawing room fish tail knife 16th century fruit knife 15th . Made in mahogany or veneered with burr walnut, it was certainly one of the more commendable inspirations of the designers during the Victorian era american antique slant front desk .

FIRST HALF OF NINETEENTH CENTURY
1800-1850
THE year i800 is a convenient date in the history of furniture only in the sense that it marked the begin-
ning of a new century antique hexagon ladles . Apart from that it showed no sudden change in style any more than the start of any other century countries that art deco was very popular . The same king was on the throne and was to live for another twenty years, although for the last ten the Prince of Wales was to act as regent lion feet table . Furthermore, Sheraton, who published his first furniture book in the last decade of the eighteenth century (see p jennens and bettridge . 181), brought out his Cabinet Dictionary in 1803, and lived until 18o6 elephant mahogany antq . Change was taking place, but no more quickly than at any previous period j s henry furniture .
At the same time, the period 1800-1850 is momentous in that it saw the beginning of the industrial age in which the machine began to replace hand labour hinges leaves antique table . At first its effect was scarcely felt, for the machines themselves were crude and unreliable and had not stood the test of time “holland & sons” cabinet . Furthermore, no one had had sufficient experience in their use to use them to the best advantage hammered flatware crest urn . In any case, their early use was largely confined to Government departments such as shipyards 18th century rococo copper candlesticks . Being individually built, they were necessarily expensive 4 foot walnut drop leaf table .
The use of machines speeds up work and reduces costs, and that was largely the reason for their introduction scottish art nouveau inlay furniture . There was, however, another and, in the long run, a deeper-reaching effect 18th century soup urn . This was the influence on design itself circular extending dining table . When you install a machine its first use is invariably to quicken and ease the more back-breaking jobs, such as converting logs, ripping out parts, rough planing them, and so on wileman ironstone coffee pot . Very soon, however, other possibilities are realised, and you see that it can be used for other work which would be difficult or at least expensive by hand craftsman for wooden vitrine . Then comes the idea of adapting the machine for other operations, so that more and more handwork is avoided sheffield plate candelabra . At last hand work becomes a thing to be avoided, and then is born that insidious idea of making the design to suit the machine silver candlestick dated 1750 . In a broad sense this is inevitable because any change in technique of
FIG french drop front desk . 156 antique table porcelain top . MAHOGANY CHAIR WITH BRASS INLAY pre war veneer antique bureau . 18io-i815-
This is of special Interest in that the back legs are not set square with
the front but line up with the slope of the side rails (see plan) brass frame girandole images . This is a
feature not found in chairs of earlier date anglo-chinese furniture . See also F in Fig first antique table de chevet . 157 decorating with a pie crust antique table . Owing
to the pronounced side curvature this results in the bottoms of the legs
converging value of mahogany marble side table .
manufacture is bound to have its repercussions on design, but the evil comes when sound construction and form are sacrificed to suit the limitations of a machine poole pottery streamline coffee sets .
However, up to 1850 there had not been any serious sacrifice in this sense, and during the fifty years we are speaking about there was a great deal of sound and delightful furniture made, especially in the first twenty years of the century brass sideboard gallery .
For those interested in the subject the following few notes
FIG identifying furniture makers bookcase oak . 158 cassone with pastiglia . BLACK JAPANNED CHAIR WITH INLAY two tier rectangular victorian table . Mid antique square to round drop leaf table . i9th century mahogany tea caddy tripod leg .
The entire back is in papier mficU screwed to the
lower framing early tables . The back, legs, and seat rail are
inlaid with mother of pearl dresser with kneehole .
on early machines may be of value antique wood trestle table with leaves . It should be realised, however, that machines were not of necessity power driven black bone inlay dressing tables . Many of them required human labour to turn them aimone mfg co furniture . Even in 1914 some circular saws and bandsaws were still being made which were fitted with handles, and sometimes pedals, which either the operator or an assistant had to work antique maple desks . Some-times larger saws were propelled by horse labour, the animal being yoked to bar which revolved a centre pillar, which in its turn was geared to the saw rh vase austria . Water and wind power too were used antique sideboard with desk .
As early as the fifteenth and sixteenth centuries machine saws had been devised, these generally being reciprocating saws worked by cranks antique gate leg tables . They were exceptional, however, most cutting being done by pairs of sawyers over a saw pit italian 18th century cabinet makers .
FIG satin birch bow chest . 160 jacobean antique furniture . FULLY UPHOLSTERED COUCH sheraton period cutlery urn . About i85o marquetry tray brass handles .
This sketch was taken from a small model made about the middle
of the 19th century, and is typical of the period 18th century amboyna card table .
No doubt the reason for the development of woodworking machines in the nineteenth century was largely due to the tremendous importance of wood as a basic material for all purposes was there a change in arts in italy between 1920 and 1940 . It was needed for ships, vehicles, houses, some bridges, engineering, agricultural appliances, furniture, and so on antique continental porcelain . It was in fact in Government shipyards that the first serious and really practical machines were made american 19th century side boards .
Samuel Bentham developed the rotary system of cutting as distinct from the reciprocating, and designed saws, planers, boring machines, tenoners, and veneer-cutting machines antique swedish armchairs . These were mostly patented between 1791 and 1793, but it would have been many years after that such machines became generally available to the woodworking industry generally art deco harlequin fine china . Marc Isambard Brunel had also much to do with early machines, and had in fact patents on circular saws in 1805 and i8o8 czechoslovakia vases . A bandsaw was patented by Newberry in 1808, but its success was hampered by poor quality saws, and it did not become really practicable until 1850 when reliable saws were made round oak table dragon legs . Many planing machines were invented in the first fifty years of the nineteenth century, some in U antique gateleg table small .S antique divans .A pictures of expensive antiques . Most early machines had wood frames chinese qing porcelains . It was, in fact, not until the turn of the mid-century that all-metal frames were made 18th century marquetry bow front commode .
The refined and somewhat delicate style as exemplified in Sheraton’s works continued during the opening years of the century craftsman for wooden vitrine . The deterioration in his last designs, as shown in his Encyclopedia, 1804-1807, mentioned in Chapter X, was little more than a pandering to a passing fashion, and it is fortunate that the more grotesque items were not made in greater numbers antique william and mary oak dining room sets .
Other influences were at work, however, and to trace these we have to turn to France, where the Consulate and Empire periods in which Napoleon was the dominant figure was producing a marked style known as Empire russian chair lion . This is dealt with more fully in Chapter XV, but it had its counterpart here in a style sometimes known as English Empire wedgewook stonewear white . Its chief exponent was Thomas Hope, who published his Household Furniture and Interior Decoration in 1807 19th century lion claw pedestal table . This, like the French Empire, went back to Greek and Roman forms for its inspiration, and produced some rather severe designs, mostly in mahogany with brass mounts in the form of vases, laurel wreaths, helmets, honeysuckle, lyres, and so on antique oak draw leaf table . The style owed little to tradition, however, and, although much of it was well made and of good proportions, it seems to strike a foreign and somewhat jarring note antique writing box . Many of the shapes, especially chair and settee legs, seem curiously unsuitable for making in wood antique refectory tables .
An attractive chair of about 1810 is that in Fig french word for chasing . 155, and shows a high degree of skill in its manufacture pedestal dumb waiter . The shaping of the members at the back, which necessarily have compound curvature owing to the plan curving combined with the elevation shaping, is beautifully worked out gate leg vintage drop leaf tables . The back-ward curve of the front legs is characteristic of the period and suggests Hope influence biedermeier antique de .
Another chair of about ten years later in date and of somewhat similar style is that in Fig aristide colotte . 156 and is given because it embodies a feature not found in chairs of earlier date drop leaf table rectangle vintage . If any of the earlier chairs are examined, it will be seen that if a section is taken through the back legs at seat level the wood from which they are cut is invariably square with the front king george iv side board .

FIG bambocci antique . 161 drapery designs for dressing table . CIRCULAR DINING TABLE OF ROSEWOOD, BRASS
MOUNTED antique oval dutch table .
1810-1820 antique dealer furniture iron louis xvi .
The lyre motif of the centre pedestal was a common feature of the period egyptian figurine manufacturer in spain .
The ” strings ” are brass rods drop leaf table gate leg . A brass line is inlaid around the top
an inch or so from the edge antiquevenercoffeettableclawfeet . The latter is cross-veneered; also the
framework edging arabesque vertical plate racks - 2 tier .
Thus the chairs in Fig william france furniture maker . 4o are as shown at A, Fig what antique furniture maker marks under drawer front with number . 157 bureau bookcase writing desk display cabinet 1930s . Even when curved as in Figs 18th century plate racks . 77 or 107 they are still set square as at B and C, Fig fiddleback walnut louis xiv reproduction desk . 157, any convergence at the feet being arranged by reducing the length of the seat rail and cutting the shoulders at an angle sauce boats . Much the same applies to the chairs in Fig antique carved trestle table . 142 and to that in Fig neo-rococco cabinet . 155 tulip porcelain chamber pots . The only exception is in some Adam and Hepplewhite chairs, which have either round, oval, or hooped-shaped seats (see Fig antique half round side table mermaid . 132) chiffonier 19th century . In such chairs, owing to the shape, the rails are tenoned into opposite sides of the leg instead of into adjacent sides as in all other examples sheffield plate candelabra . As a consequence the back legs, owing to their backward curvature, are further apart at the bottom than at seat level forks and spoons in the 18th century . This is made clear at E, Fig french dining draw leaf table stretcher . 157 plain serving table .
Turning now to the chair under discussion, Fig colbolt blue plates and antique . 156, note from the plan that the legs are not square with the front, but are parallel with the sloping sides as at F, Fig marquetry roll top desk . 157 antique refrectory trestle table . As a result the legs are closer together at the feet than at the seat,
FIG chamberpot flap . 162 american oak drop leaf table antique . VICTORIAN DINING TABLE IN WALNUT queen anne antique dressing table . Mid johnstone and jupe table . 19th century 18th century metal chamber pot .
The top is veneered with figured walnut arranged in a quartered pattern cage leg antique table .
A huge bolt passes through the centre, Joining the tripod stand to the
pillar and sub-top framework art deco and exotic leather .
this being produced without any side curvature in the leg antique gothic table grotesque . The shape looks more elaborate than it actually is, the shaping being confined to the side elevation of the back iron and wood refectory tables .
The chair in Fig wedgwood keith murray slip two tone . 158 dates from about I85o and is more interesting than beautiful photo antiquities furniture in france . The entire back is in papier mftche, this being compressed to shape and fixed to the back of the seat, probably with screws antique sheffield piece marked “royal sheffield” . There is in fact considerable dishing and shaping in the back and, when it is realised that it is no more than I in scandinavian art deco furniture . to $9 in antique wrought iron candle sticks . thick in parts, it becomes obvious that such a back would be impracticable in wood “art deco” “dining table” french walnut extension . It is, in fact, an early example of a mass-produced chair and bears the marks of deterioration in design four pillar trestle table . As a matter of passing interest, note how the rails are tenoned into opposite sides of the back legs owing to the hooped shape, hence the divergence at the feet (see also E, Fig age of jazz shelley vases . 157) walnut gaming table with pillar legs .
A couch showing the classical influence of Greece is that in Fig antique replica, french victorian mahogany empire desk writing table . 159 napoleon leather and steel campaign chair . It belongs to the Hope period of the early
FIG heal and russell art deco antique furniture . 163 16th century small tables . SOFA TABLE VENEERED WITH AMBOYNA AND
MARQUETRY hongwu copper red .
About 1815 delatte nancy .
The flaps were invariably supported by brackets pivoted on knuckle or
finger joints cut in wood drop leaf table with pembroke leg value . The legs were usually dovetailed to the base,
and it was common practice to strengthen the joints with metal plates
screwed to the underside 19th century regency dwarf parlor cabinet value .
nineteenth century 19th century leather chest . Fig george speight porcelain . 16o shows the rather heavy and stuffy appearance of a fully-upholstered couch in the middle of the century antique serpentine swedish chest of drawers .
An interesting contrast in dining tables made within about thirty to forty years of each other is shown in Figs drop leaf sofa table . 161 and x62 lyre based sheffield candlesticks . The former, of the Regency period, has a certain grace and charm about it empire sideboard antique value . Here again we see the old classical Tables of the Mid-Nineteenth Century
influence in the lyre motif wooton chest . Light though it looks, the table is strongly built since the lyre-shaped pillar is not pierced right through, but is recessed at the surface only antique red stoneware spittoon . The legs are dovetailed to the base john widdicomb desk . The whole top pivots, so that the table takes up little space when not in use longcaseclocks chinoiserie 18.century .
In Fig vintage wooden handled three tined dinner forks . 162 we pass to a typical Victorian table of about 185o which, whatever one may think of the design, is beautifully made ashtray daum nancy france antique . To us it may lack the refinement and grace of the earlier table, but it is an interesting speculation as to what folk of A daniel quare 1674 tortoiseshell case pocket watches .D pilaster bookstand price . 2oo0 may think of it 17 century english stoneware . For years it has been the practice of people to speak of Victorian furniture with something like contempt (though no one really familiar with it would ever deny its soundness of craftsmanship) furniture canape antiques italian . Already, however, it is appearing in antique shops, especially early Victorian pieces, and it is quite on the cards that folk of the future will see beauty in what we now call heaviness and vulgarity 1925 antique floding desk . Fashions change, and nearly all generations are contemptuous of the works of their immediate forbears “myott son & co”+oriental . Presumably the Victorian designers did not intentionally design things they knew to be ugly—and for a matter of that who are we to talk in these middle years of the twentieth century r
A type of table popular during the period under discussion was the sofa table, an example of which is given in Fig antique pier tables . 163 name a piece of furniture that begins with v . It was a type made popular by Sheraton and had hinged flaps at the ends supported by pivoted brackets furniture + finmar ltd . There were invariably drawers beneath the top standing silver mirror candlestick styles . As the table was intended for use away from the wall the ” back ” frequently had dummy drawer fronts small dressing table with cupboard and drawers . Its form during the Regency period is shown in Fig queen mary mother ship tea dish antiques . 163, which shows the Greek influence of the period in the ornament antique 17th century gentleman’s dresser .
The Regency version of the sideboard generally had cellaret pedestals reaching down to the floor and joined by a centre table portion quite open beneath torror in france . There was generally a drawer beneath the top as in Fig small antique french writing cabinet . 164 yabu furniture . Tapered pedestals too were becoming popular, and the scrolled back shows the beginning of a feature which was often to assume quite gigantic proportions in the late Victorian period, and was often surmounted by an elaborate piece of carving, frequently of extremely fine craftsmanship antique wash stands .
Bedsteads in the late eighteenth century were generally of the four-poster type, but by the turn of the century two SIDEBOARD IN ROSEWOOD WITH BRASS INLAY
1810-X820 staffordshire figure home .
The tapered form of pedestal was popular in the Regency period how much is an oak butler’s tray table worth . The relatively large size of room in which
it would have been used is shown by the great depth, which is 29 in greek neoclassical porcelain . over the centre portion, and 251 in richard ginori doccia 1924 platter .
over the pedestals art deco console table black .
Bedsteads of the Nineteenth Century
kinds developed rectangular drop leaf sofa table . In the one the head-posts with abbreviated tester were retained and the foot-posts eliminated early ming porcelain . Frequently head curtains were used, and these could either be drawn right back or pulled a foot or so down the bed antique tilt top dinner table photos 1800 century . The other type owed its origin to the Empire style of France english refectory table . In this the bed was intended to stand with its side to the wall vintage wooden handled three tined dinner forks . There was a head and foot often sloped and having rather the appearance of a couch—the couch in Fig chinese porcelain shards . 159 is in fact suggestive of the general form, though this is necessarily on a smaller scale 19 century inventions . In some cases curtains were carried on to a shaped tester art nouveau origins .
CABINET WITH BOULLE MARQUETRY empire furniture.com .
Louis XIV antique tea table glass serving tray .
The work is carried out in brass and tortoiseshell, and is
decorated with some particularly fine mounts of brass 19th-century swedish table . The
top is of marble antique chippendale breakfast table . The accommodation consists of a centre
cupboard with door and four drawers at each side 19th century, federal mirror .

Mid 19th Century Furniture: Styles.
FURNITURE THAT DEBUTED during the
mid 19th century was imbued with the innovative spirit, social mores, and the whimsy of its age. Metamorphic furniture allowed cabinet-makers to show off their technical expertise.
The German-born American cabinetmaker, George Hunzinger, pioneered the design of functional, mechanical pieces in the United States, and many manufacturers soon followed suit.
Stephen Hedges patented a desk in 1854 that converted from an elegant side table to an ecritoire combined with a seat. It became known as the Aaron Burr desk after an article appeared in the New York Herald in 1911, stating that Burr had challenged the presidential candidate Alexander Hamilton to a duel in a letter written at one of them. In fact, Hedges had patented the ingenious desk 50 years after the duel and 18 years after Burr’s death, but the desk became forever known as the Aaron Burr desk.
Various collapsible and extendible forms, including dining tables and buffets, proliferated as people became enamoured with their ingenuity and space-saving qualities.
SOCIAL MORES
The fashion for lavish entertaining gave rise to the cocktail cabinet, which contained crystal decanters and perhaps a cigarette case or humidor. The wealthy displayed their valuables in a glass-topped bijouterie — the name is derived from the French word for “jewellery”. The Sutherland table, named for Queen Victoria’s Mistress of the Robes, was used for taking tea and playing cards. A precursor of the coffee table, it was never very popular.
The repressive morality of the period conspired to create the dos-a-dos and the conversation suite. Both these seat forms enabled courting couples to become acquainted in what was regarded as a seemly manner.
The exterior surface of the desk has a simple panel with beading.
The hinged top opens to reveal a seat and a drawer.
The seat is upholstered In leather, fixed to the wood with rivets.
The underside of the desk
bears the patent label, “by
Stephen Hedges”.
Lockable drawer
The scroll feet terminate in brass casters.
AMERICAN AARON BURR DESK
This ingenious, space-saving design was patented by Stephen Hedges. The long, oval top of an unassuming mahogany side table is hinged so that it can fold back on itself, and the case of the desk is also hinged to open at
the front. When both are opened, the table is transformed into a writing desk with a drawer to one side and a leather upholstered seat to the other. The piece is supported on cabriole legs and scroll feet on casters for portability.
CONVERSATION SUITE
this upholstered suite in Louis XV manner comprises four independent buttoned sections - two long sides and two short ends – arranged Dock-to-back with each other. The angled ends of each section make it easy for a person
seated with another in one of the long sections to turn towards a person seated in the adjacent smaller section and converse. The sections are supported on rosewood scrolling feet and casters: a 19th-century innovation allowing ease of movement around the room. Late 19th century.
s early Victorian show-frame sofa is made
rosewood. it has two high-backed,
ends and a lower back section with
2 l fluted supports. The seat, back, and
arms are upholstered in green raised
fabric. The seat is supported on carved legs with ceramic casters. The sofa is a combination of styles: the twist decoration is Jacobean, while the cabriole legs are inspired by Louis XV style. c.1850.
METAMORPHIC OAK CHAIR
This chair converts into a set of library steps. The chair seat is hinged near the front so the chair back swings up and over the seat to become the rear support for the steps, which double as the back legs of the chair. Late 19th century.
GOTHIC-STYLE CHAIR
This walnut chair features Gothic-style, needlework upholstery and Jacobean twist carving. The tall back is framed by barley-twist columns above a spreading seat. The high back and low legs make this a new form.
SCOTTISH DINING TABLE
The top of this extending dining table has demi-lone ends and boldly moulded edges above a plain frieze. The table top is raised on turned and tapering legs with fluted decoration, ending in brass caps and casters. The table is extended by using a winding mechanism operated by a key. The mechanism was
invented in 1835 but became popular later in the century. It can use up to six extra leaves. Late 19th century.
ENGLISH MAHOGANY BUFFET
The top of this buffet has moulded angles and a counterbalanced undershelf. Beneath that lies a third shelf. On opening the buffet, the bottom shelf slides down the supports at each end of the table, the middle shelf remains in place, and the top opens out to form the upper tier. It is raised on panelled trestle supports and scrolled console brackets. c.1860.
MAHOGANY COCKTAIL CABINET
This cabinet has a divided, hinged top, which encloses a rising interior with crystal decanters, glasses, and a cigarette box. It is supported on square-section, tapering legs with brass caps and casters. c.1900.
MAHOGANY BIJOUTERIE CABINET
The circular hinged top of this cabinet is inset with bevelled glass. The capriole legs have gilt mounts, terminate in hoof feet, and are joined by a shaped stretcher. Late 19th century.
BIJOUTERIE CABINET
This mahogany and gilt-metal mounted cabinet has a serpentine top with floral marquetry, inset with glass. The case is supported on slender cabriole legs, which are united by an undertier.
ENGLISH ROSEWOOD CARD TABLE
The serpentine top of this Victorian table opens out and swivels to provide a playing surface. It has a moulded edge, enclosing a round baize lining, and rests on four scroll supports with a central finial and scroll legs with recessed casters. Mid 19th century.
SUTHERLAND TABLE
This burr walnut, oval, drop-leaf table has a veneered top over twin, carved, baluster uprights with carved cabriole supports on casters, joined by a turned stretcher. It has a swinging action to each side.

Glass is distinguished from other materials by its transparency.
People like glass because of its shine and the way drinker.
glass refracts the light that passes through it. Glass is also extremely practical. It does not allow liquids to permeate it and is a poor conductor of heat. On the other side of course is glass’s only disadvantage — its fragility. Glass today is something modern humankind takes for granted. There is an involved process before glass objects reach the consumer.
Glass is formed by heating various metal oxides and quartz. In addition to the raw materials of glass (quartz and borax), there are also alkaline substances (potassium or sodium oxide). These make the silicates indissoluble.
The right composition of substances for glass is the result of centuries of experience. Glass was probably first made about 4,000 years ago — perhaps discovered in ancient Egypt by chance.
The production of glass was then a relatively straightforward process. The glass-makers first smelted glass in earthenware vessels over an open fire. The glowing pieces of glass adhered together and were then plunged into cold water where they splintered.
These shards of glass-like material were known as frit. The frit was then ground between millstones under powdered when it was smelted once more to achieve the desired result.
This principle was in use until some time after 1500. Old illustrations often show two glass furnaces: one is for the initial smelting of the raw materials and the second for melting the powdered frit.
The production of glass was changed in the eighteenth century in Britain. Coal replaced wood for the glass furnace but this turned the glass yellow from the sulphur dioxide that is released. This meant that glass had to be smelted in a sealed kiln.
This also made it more difficult to keep an eye on the smelting process. A solution was found by producing softer glass mixtures.
Means of decoration
Glass can be decorated in a number of ways. The most direct method is to apply layers of other glass or to mark the surface during the glassblowing process while the glass is soft. Such results depend on the skill and artistry of the glassblower. Glass has been blown since early times and had reached a state of high art in Roman times.
There are various waysin which glass can be decorated during blowing. One way is to add small pieces of glass or `prunts’. Another way is to spin the glass of the same or contrasting colour so that it forms a spiral on the glass surface. Many of the varying techniques are based upon centuries old traditions.
An entirely different way of decorating glass is to enamel or paint it.
This technique does not rely on the artistry of the glassblower. This is done with either ‘cold’ or fired enamel. Glass can also be gilded with precious metals such as silver or gold. Further ways of decorating glass are by cutting or engraving it. Glass is engraved with a diamond which ‘draws’ a design on its surface and it can also be stippled (a Dutch invention) with either a diamond or softer stylus.
Different effects can be created by making either open or dense stipple marks.
Glass has been cut since early times but etching was discovered by the Swede Sheele who notice that the acidic gases of hydrogen fluoride ate in to glass. Glass can also be ‘etched’ by sand-blasting. Encapsulation is done by placing objects in glass while it is still soft that then become fixed in the solid glass. This method was especially popular in Europe between 1800 and 1850.
Glass production from east to west
The production of glass spread to other countries from Egypt around 1000 BC. The techniques were extensively improved between the sixth and second centuries before Christ.
A very important discovery was made at Sidon in Syria in the first century before Christ – the glassblower’s ‘blowing iron’.
This enabled objects to be made of thin glass. It was a technique that spread throughout the Roman empire to Italy and Spain to the west but also to Gaul (France), Britain, and Germany in the north. The major glassblowing centres were established along the Rhine and in Gaul (France).
Production in the east
In common with many other techniques, glass-making was also largely forgotten following the fall of the Roman empire but this was not true in the east. The most important glass-producing region was Byzantium where new techniques were also developed that can be seen in cut and engraved goblets, bottles, ewers, and mosaics of the era.
Arabs were extremely fond of glass embellished with gilt or enamel and major Arab glass centres were Damascus and Aleppo in Syria.
Very fine coloured glass goblets, bottles, ewers, lamps, and dishes were made in these towns between the twelfth and fifteenth centuries. These were often decorated with bright painting.
Persian glass-making took over the leading position in the fifteenth century and Persian glass even influenced Spanish glass. Surviving Persian glass from this era consists mainly of bottles of green or blue glass.
Medieval European glass
Glass production in the former western Roman empire after its fall only survived in Gaul (France), Germany, Flanders, and Britain.
In the early Middle Ages the preference was for decoration with grooves, flattening, and decoration with ‘threads’
of glass. Several new types of object appeared such as `trunked’ and ’studded’ beakers. Otherwise just simple medicine bottles were made from green glass that was far from perfect.
Glass production even went into decline in the ninth century and many in Christian countries regarded glass as a heathen product. After all the heathens used bottles for their ‘pagan’ burials. Pope Leo IV even banned the liturgical use of glass. Not everyone was of the same opinion.
Bishop Isidorus of Seville in Spain wrote a treatise about glass based on Naturalis Historiae, written by the Roman Plinius. The monk Theophilus wrote an extremely important work about glass —probably during the late tenth or early eleventh century, somewhere along the Rhine.
In a piece about the art of glass he described the constituents of Roman and Asian glass, wrote down many legends, and described the process of glassblowing in great detail.
Venice
Sometime around the birth of Christ, glass was produced in northern Italy. The technique was maintained by cloistered orders and spread from these during the Middle Ages throughout Europe. It was in this region that the one of the most famous glass-making centres was established.
Benedictine monks in Venice specialised in making bottles by the year 1000. Following the conquest and pillage of Constantinople by the crusaders in 1204, many Byzantine glassblowers sought to escape to the powerful trading city of Venice.
They strengthened Venetian glass-making with techniques such as glass mosaics. The first thin and hollow glass-ware and first glass jewellery were made in Venice in about 1250. Soon afterwards the production of glass became a monopoly of the Venetian state. The glassblowing works though were forced to move outside the city. With their extensive use of fire they threatened the safety of the city and hence were moved to the island of Murano.
The first reports of exports of glass from Venice are also recorded around 1250. They also made optical glass for spectacles and window glass.
A great deal of glass incorporating soda from burnt seaweed was made in the fourteenth century. The Venetians also began to make latticinio glass with thin white threads around 1400. The Venetians were also known to make golden coloured glass by chemical means and other colours too with copper and cobalt.
They also decorated their glass by `burning’ colours into it. This is very characteristic of fifteenth century Venetian glass. In the sixteenth century the Venetians mainly decorated their glass with patterns of opaque white threads. Vegetal and abstract designs were also created on the thin-walled soda glass.
In addition to clear cristallo glass, Venice also made opaque white lattimo glass that was translucent but not transparent, millefiori containing tiny rods of coloured glass, and frosted glass with a cracked surface. The glassblowers also produced all manner of decorative forms with glass. The chemical composition of Venetian glass was a secret with severe penalties for anyone who revealed the procedures to make it. Despite this, many Venetian glassblowers left for other parts in the early sixteenth century and became involved abroad in the production of imitations of Venetian glass. Excellent copies of glass d la facon de Venice were made in Spain, France, and the Low Countries. These are so good that it is very difficult to determine whether a piece is made in Venice or elsewhere. The main differentiation is that the metal (body of the glass) of the imitations is not so clear, fine, and thin as that produced on the Venetian island of Murano.
Developments elsewhere in Europe
In Bohemia and Germany they also tried to join in Venice’s success. The glass works there only flourished after the Middle Ages. Many attempts were made in France employing Italian immigrants to make totally transparent and clear glass. Dutch glass makers began to make diamond engraved fluted glasses in the sixteenth and seventeenth centuries and it was the Low Countries too that made glasses with a characteristic ‘winged foot’. It was also quite common for glass made in one place to be decorated elsewhere.
BOHEMIAN AND GERMAN FOREST GLASS
The extensive forests of Bavaria were home to many glass works. The production area lay within an area bordered by the Thuringia and Bavarian forests, and the Alps and Fichtel mountains. Because of iron and potash in the raw materials the glass produced was mainly green.
New types of glassware were created that were primarily functional with the main output being glass beakers but ink pots and alchemists’ and apothecaries’ jars were also made.
This was often decorated with prunts and molten threads of glass. Glass was also decorated with bizarre relief forms. All these products were small icrean size in the fourteenth and fifteenth century. Larger pieces were noss bt made until the sixteenth century.
The most widespread of these are so maigelein: shallow beakers of blown gas
A 17th century Dutch green Romer glass. This type first appeared in the 15th century.
of which the bottom is pressed inwards. There were also much larger Pasglas measured glasses, beakers in the form of cabbage stalk, beakers with finger grips, and vertically ribbed cylindrical beakers. The classical slim and tall beakers of Bohemian glass were made in the fourteenth and fifteenth centuries. Their small stems are externally decorated with prunts of molten glass. The Romer glass was first made in the fifteenth century. These wine glasses were extraordinarily popular in the Rhineland. A bellied glass, shaped like an onion with a curved neck consisting of several plaited tubes of glass also appeared in Bohemia in the late Middle Ages.
ENAMELLING
Every glass works outside Italy strived to improve on Italian glass with their local products but the shape of their glassware is clearly different from that of Renaissance Italy. This is because of different local drinking customs. Wine was drunk in Italy but north of the Alps people mainly drank beer. This caused different demands of glasses. The Humpen beer glasses were made from the middle of the sixteenth century.
At first these were conical in form but later only cylindrical Humpen were made. This latter type had a low sole and sometimes also had a hinged lid. The style of painting was intended to give the impression of an Italian product and this also helped to mask the imperfections in the glass.
Enamelling was commonplace on sixteenth century central European glass. The best period for this form of decoration was reached in the earlier seventeenth century. The quality of glass was then improved through the addition of chemicals.
Another category of glassware was the beakers that bore the owner’s crest of arms.
These were also monogrammed and dated. Others, known as ’state eagle’ Humpen were decorated with the German state arms. Quite separate from these glasses though were the Fichtel mountain ox-head glasses that were painted with pictures of the wooded hills from which the Eger, Main, Naa, and Saale rivers rise. Old and New Testament references, fables, and allegories were also common painted decorations in both the Renaissance and Baroque eras.
Although enamelled glass originally came from Venice it gradually became the speciality of central Europe. This method of decoration was used for more than 250 years.
Spun stem Dutch glass. Spinning a thread of glass of the same or contrasting colour around a glass core is one method of decoration.
Enamel became less expensive in the later seventeenth century so that ‘ordinary’ citizens were able to buy it. Finally it became a product for the masses and when applied to milchglass became a cheap alternative to porcelain.
Finding out the origins of a piece is no easy matter. There are countless different types with regional and local characteristics but these became less pronounced as glassblowers moved to work at different places.
PAINTED TRANSPARENT GLASS
A new manner of decorating hollow glass objects was introduced in the later eighteenth century using transparent enamels instead of opaque ones. The porcelain artist Samuel Mohn of Dresden was the first to use this technique.
His ‘friendship’ glasses are painted with portraits, landscapes, allegories, and verses. He customarily signed his work with Mohn fecit. His son, Gottlob Mohn, established himself in Vienna in 1811 and signed himself G. Mohn in Wien. His first work was the painting of town views.
The Viennese porcelain and glass artist Hothgasser took up this popular subject, working mainly on bell-shaped glasses on long branched stems. He mainly signed his work with his monogram between the ‘teeth’ of the branched stem.
Sometimes though he used his full signature on his glasses. These were given as a present or friendship’s token, or served as souvenir. Kothgasser’s glasses with playing cards were very popular around 1875. Kothgasser’s work was in great demand and hence widely copied but reproductions are easily spotted by the naive compositions and lack of technique.
BOHEMIAN ENGRAVED GLASS
The process of engraving was already known during Roman times but the ancient technique was re-invigorated during the sixteenth century in southern German with fresh demand for this style of decoration. This arose because of exports of engraved crystal from Milan. The so-called ‘mountain’ crystal was rare and hence expensive. This led to people in southern Germany deciding to apply the decorative technique used with crystal on glass. Lehmann One of the most famous engravers is
Kasper Lehmann, engraver to the court at Prague. Until recently he was even deemed to have been the ‘inventor’ or glass engraving.
Engraved ginger glass, circa 1700. Although known since Roman times, it was not re-introduced until the 16th century, in southern Germany. Engraved glass became very popular in the north of the Low
Countries.
He established himself in Prague around 1600 and in 1609 he gained a monopoly from the king for the engraving of glass. Lehmann had a number of students, including Georg Schwanhardt, the most important of them, who returned to his home town of Nuremberg following Lehmann’s death. There were many engravers working in this town but each had his own area of speciality.
Schwanhardt mainly worked with Venetian-type goblets, although Venetian glass itself is not suitable for engraving because it is too fragile. Glass with lime added was used for engraving. This sparkling glass was clear and pure with strong refractory properties. It became known as Bohemian crystal.
Bohemian ‘crystal’ was discovered between 1670 and 1680 more or less simultaneously in three glashutten in southern and northern Bohemia. Knowledge of the process spread quickly throughout Bohemia.
Painting with enamel was depressed here by engraved Bohemian ‘crystal’. The first decorations were copies of motifs used in Venice. Because of the high quality of the new material it quickly became a formidable competitor for Venetian glass. Traders not only succeeded in selling Bohemian glass throughout Europe, it was also shipped to other parts of the world.
When the engraving switched to the Baroque style Bohemian glass was even more successful.
SILESIAN ENGRAVED GLASS
The successful formula of Bohemian glass works was also followed in Silesia. The works of Count Schaffgotsch were very important to this region. The glashut in Hermesdorf in particular produced some fine pieces. This was due to the engraver Friedrich Winter who engraved a series of friendship goblets and beakers there after 1690.
The engraved glass from the works at Lobkowitz in Wiesau and Warmbrunn were also of exceptionally high quality. Silesian glass is characterised by the narrowing at the bottom of the drinking vessel. Although Bohemian glass itself was of higher quality, the exceptional Silesian engraving was better than that of Bohemia.
Glass production was advanced following Prussia’s capture of Silesia from Austria in 1742. Glass production in Silesia and Bohemia began to become less significant in the mid eighteenth century due to a number of factors. These included a smaller market through European wars that had caused economic collapse and also a reduction in the size of the market through the development of porcelain and lead crystal. Superb glass goblets made way for simple beakers. Both form and decoration were simplified and more suited to the new circumstances.
The Bohemian glass industry searched for a way to emerge from the crisis.
One of their developments was milchglas that was supposed to compete with the rapidly growing market for porcelain. Entire sets of tableware and drinking services were produced from 1760 to the mid nineteenth century by works at Harrachov in Bohemia.
The opaque ‘milk glass’ was much cheaper than porcelain but could emulate it in both form an enamelled decoration.
GERMAN DEVELOPMENTS
The discovery of the addition of lime to forest or potash glass in Bohemia was also important for the German glashutten.
This was especially true of those works of the electors of Saxony and Brandenburg which bordered Bohemia. Silesian experience in both glass making and engraving was utilised at Brandenburg works at Potsdam, Berlin, and later also at Zechlin. Potsdam attracted Martin Winter, brother of the highly regarded Helmdorf engraver.
The glass specialist and alchemist Johann Kunckel was given the task of researching the best composition for glass. He is credited with discovery of Zwischengoldglas or ‘gold-ruby’ glass. Other gifted engravers also worked for Brandeburg glass makers in addition to Winter.
Glass from this time is solid and heavy. The foot or stem, drinking vessel, and lid were decorated with leaf motifs. Pieces were lighter after 1720 under the influence of the engraver Elias Rosbach. Zechlin glass though (which had gilt medallions melted into its surface) remained fairly robust.
Knowledge of how to produce Bohemian glass spread via Nuremberg northwards. Important centres were established at Brunswick and Hesse, while the glashutten of Thuringia were also important parts of the German glass industry. Just as with porcelain, the electors of Saxony also initiated establishment of glassworks in their domain.
The Saxon works copied Bohemia so precisely that their glassware closely resembles Bohemian glass. Saxon glass though uses slightly different forms, such as horizontal, diagonal, and faceted rims on the stem and underbelly of the bowl. There is a difference too in the gilded relief and gilded engraving
‘RUBY GOLD’ GLASS
In addition to engraved glass, Bohemian glass works also produced ‘ruby gold’ glass or Zwischengoldglas during the prime era for Baroque style. This type of glass had been known in Roman times but forgotten. Following its rediscovery by Johann Kunckel in Brandenburg, Bohemian glass makers also started to make it. The same type of decoration was employed as was used for Bohemian `crystal’.
This consisted of engraving, silver gilt or gilt leaf motifs placed between two layers of glass. Only a few pieces were double layered at that time.
English lead crystal and Dutch glass
Around 1750, glass that was stabilised with lead became important in Europe. The heavy lead ‘crystal’ was well adapted to practically-shaped pieces following
Painted glass box, circa 1850. This type of movingly painted glass boxes were made in Friesland in the Low Countries Classical lines. Lead crystal has unique properties.
It is absolutely clear and is decorated in an entirely different way. By use of a diamond cutting disc a large number of facets can be created that cause light refraction — acting as a series of prisms. Dutch glass was extensively engraved with diamond cutters and lead crystal became extremely popular there. After 1750, some exceptional Dutch pieces were made by stippling the glass with a diamond.
The solid goblets used for this purpose were partly imported from Britain.
Nineteenth century glass
Bohemian crystal found a strong competitor with English lead crystal cut glass. This was because the lead crystal was ideally suited to the forms of the fashion for Classicism. The Bohemian glass makers reacted by adopting the English cut-glass technique but Bohemian glass was not suitable for cutting. The consequences were therefore limited and the technique was restricted so that cutting remained solely an extension to engraving. The subjects for engraving were determined by the current fashion and this can be seen by the motifs used.
Count Georg Buquoy of Neugrdtzen in southern Bohemia became very taken with Wedgwood’s ‘Egyptian Black’. In common with Friedrich Egermann in Haida, Neugrdtzen began making black Hyalith glass that was mainly decorated in a golden chinoiserie style.
The wares included carafes, coffee services, dishes, and vases. Egermann created Lithyalin, a different form of opaque glass that resembled jasper and agate. Like these stones it could be facet cut. Egermann’s glass works also used a golden yellow glass paint that he invented. This was used on goblets and beakers from 1820. Egermann’s greatest achievement though was his contribution to the enriching of glass.
With the help of copper he was able to create cheap imitations of expensive
golden-coloured ruby glass. Glass makers sought an ever greater range of colours and forms for their wares. On the one hand they attempted to improve the process of applying coloured glass to a clear glass base while on the other they sought to develop new methods.
This led to a new technique in which several layers of coloured glass were applied to a base. It was a process that had originated in China. By cutting away parts of the different coloured layers, all manner of colour effects could be created. The use of several layers of milchglas was particularly popular. With this, when a pattern had been cut out it was further decorated with enamel.
Bohemian glass companies exported lots of this type of ware in the 1850’s. Around 1820 the Bohemian glassworks also made glass that was smelted with embedded plaster or porcelain with portraits of famous persons. From 1830 onwards the glass market changed radically because of the major changes in how glass was made. Until that time each piece was individually crafted by a glassblower. During the nineteenth century factories began to press mould glass. This process made it possible to mass produce glass making.
The artistic level of the output dropped of course but commercial considerations were generally more important than aesthetic ones. Very few managed to avoid this trend. One who did was the Viennese artist Ludwig Lobmeyr, who owned a quality glass making works in Steinsch6nau. He was one of a group of artists who opposed the levelling down and increasing lack of taste of the mass produced wares.
This group studied ancient and exotic forms of glass and this led to their works making new types of glassware with simple and functional shapes. Before this trend gained wider acceptance though it was consumed in an even more radical movement that swept Europe under the Art Nouveau and Jugendstil names. The artists A. Daum and E. GaI16 gave glass-making back its individual power of expression and returned to the old traditions. In the United States Louis Comfort Tiffany was inspired by oriental and classical glass. His work was widely admired and echoed in Europe.
One glass works that copied his lead was the Liitz works at Klostermiihle in Bohemia.
Glass and jewellery
Glass paste and beads were used for jewellery back in the age of the ancient Egyptians. Alexandria supplied the then known world with glass beads during the
ancient Greek civilisation and during the Roman empire. The strings of beads made with them were of different colours. The glass was decorated with wavy melted threads of lighter-coloured glass. The production of beads spread through Constantinople and the other towns of the Roman empire to Europe.
Venice was an important production centre for glass beads in the eleventh century. Imitation gem stones had been made in Bohemia as early as the fourteenth century. In the eighteenth century
Louis XIV style mirror of the 19th century.
They also started to make glass beads. Production of glass beads had started in the German Nuremberg in the sixteenth century followed by the Fichtel mountains area of Bavaria in the seventeenth century, and soon afterwards by Potsdam and Thuringia.
Bead production of importance got under way in France in the seventeenth century.