Posts Tagged ‘ladles’

CLOCKS, WATCHES AND BAROMETERS Bracket Clocks
Repeater clock by Edwardus East with signed and engraved
backplatc in cboniscd case 600 0
A three-train musical clock by Moore of Ipswich with eight tunes in ebony case with gilt metal mounts in mid-eightccnth-century style, 2 ft 2 in high 440 0
George III fruitwood clock by Recordon, late Emery, London, with painted dial and frets at side and front of case, 1 ft 2 in high 290 0
George III walnut clock, the dial signed Joseph Smith, Chester,
and of pronounced Continental character, 1 ft 6 in high 210 0
George III ebonised clock, the 7-in dial signed William Smith, with calendar and strike/silent dial. The movement is contained in an inverted bell-topped case, 1 ft 4 in high 190 0
Louis XV contra-boullc clock with enamel dial signed Darmezin, Paris, and movement signed Crepaux, Paris, in cartouche-shaped case, 3 ft 1 in high 190 0
Louis XV Boulle clock by Pcrrache, Paris, with an enamelled dial, the case surmounted by a youthful figure of Jove, richly mounted in ormolu, 2 ft 6 in high 170 0
George III mahogany clock by Massey, Bridge Road, Lambeth, the circular white-painted dial with a central calendar hand, 1 ft 4 in high 140 0
George III mahogany clock, the 7-in circular dial signed Lamb and Webb, London, with calendar and engraved backplate in bell-top case, 1 ft 4 in high 120 0
Mid-eighteenth-century veneered ebony clock signed John Small-wood, Lichfield, with pull quarter repeat, 1 ft 4 in high (later dial) 85 0
George III mahogany clock, the 8-in arched silvered dial signed Gravell and Tolkien, London, with engraved backplate and tic-tac escapement in broken arch-topped case, 1 ft 6 in high 60 0
Regency rosewood clock signed on dial John P. Smith, 1 ft 3 in
high 20 0
Carriage Clocks
Clock in gilt case by James McCabe, London 675 0
Repeating French brass clock with white dial signed Gibson
and Co Ltd, Belfast, 6J in high 68 0
French brass clock with white dial signed Rowel, Oxford, 4Ј in high
Repeating brass clock with white dial and glazed brass case, 5 in high
Gilt metal timepiece, the glazed case with pierced floral frets at the sides and front, 5 in high and with travelling case
Miniature silver-cased repeating clock with white dial. The case stamped J. Keller, 3J in high
Lantern Clocks
Brass clock with engraved copper dial and an alarm disk, 1 ft 1 in high
Late seventeenth-century brass clock, the dial engraved with flowers and with pierced dolphin cresting, 1 ft 3 in high
Longcase Clocks
Late seventeenth-century marquetry clock, the 11-in dial signed Robt. Williamson, London, with calendar aperture in a walnut case inlaid with shaped panels of birds and flowers, with a bullseye in the waist door and with spirally turned columns at the corners, 6 ft 7 in high (frieze of a later date)
Tall mahogany cased clock with chimes. The elaborately foliated brass dial with a silvered chaptered ring. The case inlaid with classic urns in coloured woods, the arched hood has brass spires and the waist has a bevelled glass door
A carved mahogany cased clock with a grotesque satyr mask to the hood over a brass floral scrolled dial. Westminster, Whittington and St Michael chimes, 7 ft 7 in
Mahogany clock made by Manley of Chatham
Eighteenth-century walnut clock with domed canopy and brass face, the movement by William Stapleton, London, 7 ft 4 in high
Walnut clock, the early eighteenth-century movement signed
Andr. Dunlop, London, the 12-in dial with chestnut and
flower spandrels, 7 ft 4 in high Georgian lacquer clock with brass face and striking movement.
The case, with ‘bullseye’ door, decorated with gilt chinoiseries
on a simulated tortoiseshell ground Eighteenth-century small clock by John Lee, Gookham; with
brass dial and foliated spandrels, in a black lacquer case
decorated with chinoiseries in red and gill
Mantel Clocks
An ormolu clock, the painted dial signed F. Linke, Paris, the movement in a glazed case in well chiselled ormolu with drapery, acanthus leaves and groups of fruit and ending in double cloven-hoof feet, 2 ft 11 in high
Bronze and ormolu mounted clock, the movement contained in a drum upon which is seated a Chinaman holding a parasol, the whole on the back of an elephant, 1 ft 4 in high
A French clock, inscribed Bonniere a Clermont, in a rococo porcelain case. The blue and gilt ground painted with musicians, lovers and flowers. On a similar stand
Louis XVI marble and ormolu clock, the striking movement with enamel dial signed Hessen. The arched architectural case with drapery festoon, pineapple finials, an urn and fluted columns, 1 ft 5 in high 110 0
Regency rosewood clock, the movement by Dwerrihouse &
Carter, Davies Street, 2 ft high 70 0
Philippe clock with glass panels in gilt metal case with corinthian columns and surmounted by an urn. Decorated with coloured enamels, 18 in 68 0
An Empire marble clock mounted in ormolu, the movement with outside count-wheel, the dial surmounted by a white marble urn and suspended between fluted columns capped by ormolu pineapples, 1 ft 4 in high 55 0
Watches
Gentleman’s 18-carat gold half-hunter watch 20 0
Early nineteenth-century verge watch by D. Nevern, in a tor-
toiseshell case, the dial enamelled with a wharf-side scene 13 0
Gentlemen’s 18-carat gold pocket watch by George Harvey,
Wellington 13 0
George III verge watch by William Fowler, London, in a silver
case, London 1783 9 0
Nineteenth-century verge watch by Nicoll, Great Portland
Street, in a tortoiscshcll case 7 10
Barometers
Early   Victorian   mahogany  stick   barometer  by  E. Davis,
Shrewsbury, 3 ft 3 in high 70 0
Regency rosewood inlaid with mother-o’-pearl banjo barometer
and thermometer 46 0
George III mahogany banjo barometer and thermometer with engraved scales by A. M. Ortelli, Godalming, the case outlined with fruitwood lines, 3 ft 2 in high 38 0
Georgian mahogany stick barometer and thermometer by Rout-ledge, Carlisle 38 0
Mahogany stick barometer and thermometer by Salmon, Bath 38 0
A Regency rosewood banjo barometer and thermometer by
Aprile Sudbury 34 0
Early nineteenth-century mahogany banjo barometer by Lione and Tarone, London, with a thermometer and the case inlaid with Prince of Wales plumes and a whorl pattern, 3 ft 2 in high 30 0
Early nineteenth-century mahogany banjo barometer by A.
Celti, Reading, the case inlaid with shells, 3 ft 2 in high 22 0
SILVER
(Troy weight: 20 pennyweights [dwt] = 1 ounce [oz])
Baskets for Bread, Cakes, Fruit, Sugar or Sweetmeats George II oval-shaped cake basket on four cherub mask and scroll feet. The sides pierced and engraved with flowers and
scrolls and the base engraved with a coat-of-arms, by Paul
Crespin, 1753, 62 oz 3,600 0
George III oval pedestal cake basket by John Ernes, London,
1804, 24 oz 10 dwt 400 0
George III boat-shaped pedestal sugar basket with engraved border, reeded edge and swivel handle by Peter, Ann and William Bateman, London, 1793, 5 oz 10 dwt 320 0
Victorian oval basket, the pierced panels embossed with beading
and garlands, London, 1895, 19 oz 62 0
Candelabra and Candlesticks
Pair of George I dwarf table candlesticks, the baluster shafts upon square terraced bases by William Darkeratt, 4J in high, London, 1726, 20 oz 1,500 0
Victorian tabic candelabra with two tiers of six scrolled branches issuing from a bold Corinthian column supported on a square terraced foot, with neo-classic rams’ mask and husk swags by R.H. over R.H., London, 1877, 30 in high 355 0
Pair of George III table candlesticks, the tapering baluster shafts upon half-fluted circular bases by John Green & Co, Sheffield, 1800 195 0
George III chamber candlestick and snuffer, the gadrooned edge
witli shell motif by William Cafe, London, 1761, 12 oz 130 0
Casters
Garniture of three George II vase-shaped sugar casters of plain
design by John Delmester, London, 1758, 15 oz 10 dwt 930 0
William IV Scottish baluster caster engraved with a crest above floral decoration on a granulated ground, by Elder & Co, Edinburgh, 1832, 4 oz 7 dwt 90 0
George III baluster caster with pierced cover and wrythen
finial, by Thomas Satchwell, 1780, 2 oz 4 dwt 85 0
George III vase-shaped caster the otherwise plain body engraved with contemporary crest. The mark of George Giles struck over another, 1783, 2 oz 8 dwt 65 0
Coasters—Wine
Set of four partly fluted circular coasters with gadrooned rims and engraved with crests by John & Thomas Settle, Sheffield, 1818 410 0
Pair of George III coasters with pierced waved galleries, London, 1794 270 0
Pair of William IV circular-shaped wine coasters with foliate borders and crested silver bosses to the wood base, by Henry Wilkinson & Co, Sheffield, 1831 150 0
Pair of George III coasters with beaded rims, the pierced sides stamped with arcading, urns and laurel festoons, maker’s mark missing, 1794 100 0
Coffee Pots
George I small plain cylindrical coffee pot with octagonal spout and low domed cover with baluster finial, by Paul De Lamcrie, London, 1725, 11 oz 3 dwt 1,900 0
George II baluster coffee pot, plain with foliate decorated spout, wood handle and hinged domed lid, probable maker Fuller White, London, 1759, 21 oz 1,350 0
Late George III tapering cylindrical coffee pot, the plain body engraved with contemporary armorials and a crest, by Peter, Ann and William Bateman, London, 1802, 35 ox 2 dwt 1,200 0
George IV coffee pot, vase-shaped, with moulded bands at the neck and waist, leaf-capped scroll handle and foliate finial on lid, by Pearce & Burrowes, London, 1826, 22 oz 5 dwt 210 0
Victorian vase-shaped coffee pot engraved with key pattern
decoration, London, 1872, 24 oz 135 0
Cruets
George II five-bottle cruet frame on four shell feet with detachable baluster handle. Five cut-glass silver-mounted bottles. By Jabez Daniel, 1750, 28 oz 7 dwt 105 0
George III cruet frame for six bottles with reeded loop end handles, ring holders, on four feet. Five glass bottles all chipped, one broken. By Henry Chawner, London, 1792 16 0
Cups and Goblets
Elizabeth I secular wine goblet, the bowl decorated with tulips and strapwork motifs, on a slender baluster stem and circular fluted foot, London, 1593, 5 oz 10 dwt 2,000 0
Pair of George III goblets of plain design, probably by William
Sumner, London, 1800, 20 oz 520 0
Pair of George III two-handled pedestal challenge cups and covers with reeded decoration and urn knops, by Samuel Hcnnell, London, 1806, 32 oz 5 dwt 400 0
George III tumbler cup engraved with armorials, gilt interior and the base with contemporary initials. Possibly by John Garter, London, 1766, 2 oz 1 dwt 150 0
Victorian wine cup, the beaker-shaped bowl and pedestal base cast and chased in low relief with grape-laden vine tendrils, by Hunt and Roskell, London, 1875, 10 oz 1 dwt 52 0
Cutlery—Canteens
George III fiddle thread pattern table silver: 24 tablespoons, 36 table forks, 12 dessert spoons, 12 dessert forks, 12 teaspoons, 6 sauce ladles, 2 soup ladles, 1 marrow scoop, majority by Richard Crossley, 1798/1800/1804, 146 oz 9 dwt 750 0
Victorian fiddle pattern table silver: 12 tablespoons, 12 table forks, 12 dessert spoons, 12 dessert forks, 6 teaspoons, 2 salt spoons, by George Angell, London, 1863, 116 oz 14 dwt 260 0
Cutlery—Forks Dessert
Twelve George I  three-pronged  forks with crest, different
makers, 1718, 14 oz 1 dwt 1,500 0
Twelve George IV fiddle pattern forks by James Scott, Dublin,
1822, 15 oz 75 0
Six George III fiddle pattern forks by G.D., London, 1794,
8 oz 14 dwt 65 0
SOME AUCTION ROOM PRICES ! 1968-69
Cutlery—Forks Table
Twelve Queen Anne three-pronged forks engraved with a crest,
by David King, Dublin, 1708/10, 28 oz Four George II three-pronged forks engraved with two crests,
1755, 7 oz 18 dwt Eleven Victorian fiddle shell pattern forks by George Angell,
1857/61, 36 oz 16 dwt
Cutlery—Forks Toasting
George III fork with knopped shaft and scrolled handle, probably by R. Preston, London, circa 1767, 7 oz 10 dwt. 17f in long
George III fork with knopped shaft and scrolled handle by John Deacon, London, circa 1775, 8 oz. 19i in long
Cutlery—Knives
Forty-eight Victorian table knives and twenty-four dessert knives, kings pattern, steel blades by J.A. or T.S., 1884
Twelve eighteenth-century dessert knives, the multi-faceted bloodstone handles with knopped urn finials and mounts engraved, the scimitar blades of steel. Circa 1700, (Some handles cracked)
Cutlery—Ladles
Four George III sauce ladles, crested Old English pattern by
Hester Bateman, 1783, 5 oz 19 dwt Pair of George III sauce ladles with ribbed and punched beaded
bowls, by Michael Keating, Dublin, circa 1780, 2 oz 16 dwt
Cutlery—Spoons Dessert
Nine engraved spoons, seven by William Soame, 1741, two 1748, 12 oz
Ten Hanoverian spoons engraved with crest, 1760, 11 oz 5 dwt Cutlery—Spoons Serving
Pair of George III Old English pattern spoons by Steven Adams,
London, 1772, 5 oz 15 dwt Pair of Victorian spoons by George Angell, 1854, 10 oz 14 dwt
Cutlery—Spoons Table
Six George I Hanoverian pattern spoons with rat-tail bowls
by Charles Jackson, 1723, 11 oz 2 dwt Six George III Old English pattern spoons with contemporary
initials J.G. by Hester Bateman, 1780, 11 oz 17 dwt
Cutlery—Spoons Tea and Coffee
Six William IV ‘bright-cut’ spoons, 1836, 3 oz 7 dwt Eight George IV fiddle shell pattern spoons by J. McKay, Edinburgh, 1827, 4 oz 8 dwt

Tureens
Tureens were introduced in the early 18th century, reflecting the French fashion for serving stews, soups and sauces. Legend has it that the tureen was named after the 17th-century Vicomte de Turenne, who reputedly ate his soup from his upturned helmet; in fact, the term derives from the French terrine. From the early 18th century, soup usually accompanied boiled meats, fish, and vegetables as part of the first course and was served to the guests by the host or hostess. As such, the tureen became associated with a show of wealth and was often the most richly ornamented and expensive piece in the dinner service. Sauce tureens replaced sauceboats in the second half of the 18th century and were often smaller versions of soup tureens.
SOUP TUREENS
soup tureens were introduced c.1720, but examples dating from before 1750 are very rare today. Generally circular or oval and of heavy-gauge silver, they were set on four cast scroll, hoof, or ball-and-claw feet with cast scroll, ring, or drop handles at the sides and a domed cover with an ornamental finial; most are engraved with a coat of arms. Tureens designed in the 1730s and 1740s by famous French silversmiths such as Juste-Aurele Meissonnier ( 1695-1750) and Thomas Germain are among the most magnificent pieces of Rococo silver pair of tureens (1734-40), designed by Meissonnier for the English Duke of Kingston, is cast in the shape of lame shells on curving scroll bases, with the covers decorated with cast crustacea, game, and vegetables. These pieces were highly influential: vegetable, fish, and game finials are a feature of European tureens from the 1730s to the 1760x. In the I 750s matching stands and ladles became popular, and many tureens were fitted with detachable liners in thin sheet silver with two end handles; these are often sold separately as baskets. Sheffield-plate liners became more common after the 1770x.
In the Neo-classical period architects such as Robert Adam (1728-92) produced designs for tureens to match the dining-room furnishings. Adam’s designs particularly influenced silversmiths, and tureens of this period arc generally oval on a single pedestal foot, with high loop handles, a ring handle, or an urn finial on the cover, and reeled, beaded, and gadrooned edges; decoration includes fluting, swags, palmettos, and bands of Vitruvian scrolls. Soup and sauce tureens were often made as sets from the 1770x, but these are now rare. Tureens were also made in Sheffield plate. The handles and feet of such pieces were not cast but stamped in two halves from thin sheet metal, filled with lead, and soldered together; in many cases a silver panel was inserted for engraving the armorials.
Early 19th-century Regency tureens contrast strongly with the elegant forms of the late 18th century: massive and of heavy-gauge silver, they are richly decorated with lion masks and Classical ornament and have four cast shell, scroll, dolphin, or paw feet. The best pieces have solid cast crests and heraldic devices on the cover. Due to the increasing popularity of the ceramic dinner service, fewer silver tureens were made in the first half of the 19th century. However, a distinctive form of the 1830s and 1840s was the melon-shaped tureen with cast vegetable finials, typical of the Rococo Revival style.
Silver disks for engraved coats of arms or crests, are often easily visible. More ornate and expensive examples have cast-and-applied swag ornament, with fruit- or bud-shaped finials; some especially fine pieces made by the renowned Birmingham manufacturer Matthew Boulton (1728-1809) also have radiating fluting on the covers. In addition, some sauce tureens were engraved with a crest or coat of arms on both the cover and the body; any armorials on the cover should match those on the body. In the late 18th century engraved armorials Such as these were often ten enclosed within wreaths or ribbon cartouches.
In the early 19th century silver sauce tureens were made in fewer numbers (sometimes in Sheffield plate), as ceramic examples (particularly those in creamware) became more popular and widely available. However, some heavier versions in both silver and Sheffield plate, with large, cast, drop-ring handles and elaborate mounts, finials, and decorative borders, standing on four feet, survive from this period, while the Neo-classical boat shape was revived at the end of the century.
SAUCE TUREENS
Sauce tureens became popular from the 1770s. Unlike traditional cold accompaniments to meat, such as mustard and redcurrant sauces, the new French sauces were served hot – meaning that tureens with lids were more practical than open sauceboats for keeping them warm. Sauce tureens were usually made in pairs or sometimes as a set of four – one for each corner of the table – and some had matching ladles. Single tureens are generally less collectable than a pair, and sets of four fetch considerably higher prices. Some examples have matching stands, as with sauceboats, to protect the table from the heat of the tureen’s contents and to hold the ladle when not in use, although other pieces have covers with a notch inside the tureen where the ladle could be placed.
Like soup tureens of the period, sauce tureens from the late 18th century are characteristically oval or boat-shaped, with elegant upswept loop handles and a single pedestal foot. The cover will often be steeply domed in the centre, with the finial at the same height as the top part of the handles. The body of the tureen was raised from a single sheet of silver, while the handles and foot were made separately and soldered onto the body. The majority of early tureens have cast handles, but from about 1790 a number were made from thick silver wire. These delicate handles, which could be very easily damaged by lifting the tureen when full, were sometimes reinforced at the bottom, but it is always important to make sure that the handles have not been pulled away from the body; nor should there be any cracks or tears on the lid where any reinforcing plate that secures the finial has been damaged and/or repaired.
Sauce tureens of this period tended to be sparingly decorated, usually only with reeding, gadrooning, or beading around the rims, covers, and feet; small, urn-shaped finials on the lid were common, but these
were generally replaced with a single reeded or plain ring handle from the early 1790s on onward. On such plain pieces scratches, dents, and, on versions made from Sheffield plate, inserted

Soup tureens• CONDITION seldom good as many pieces suffered from over-use and cleaning; pieces were raised from a single sheet and should therefore not have scams, thinning of metal may indicate removed armorials
• COLLECTING examples were usually made singly but sometimes in pairs; many were produced with stands, liners (often in Sheffield plate), and ladles, but these are typically missing or have been sold separately
Marks
These should appear on both the cover and the base; armorials on the cover should match those on the body
Sauce tureens• CONDITION with the earliest designs (typically featuring a pedestal foot and loop handles) it is particularly important to check for cracking, splitting, and signs of repair where the foot, finial, and handles, join the body
• COLLECTING examples were made from the I 770s, in pairs or sets of four; from c.1790 reeded or plain ring handles were common on the lid instead of the finial
Marks
The cover and body should feature the same mark; a crest on the cover should match that on the body