Posts Tagged ‘Modernism’

Modernism Chairs

Sunday, August 16th, 2009

MODERNISM
CHAIRS
AS FURNITURE PRODUCTION steadily
shifted emphasis from craft-based manufacturing to industrial methods, so the look of the chair changed dramatically Ornament was doggedly erased from designs as structure became more important to the aesthetic look. Solid wood began to fall from favour (too expensive and inflexible) as moulded plywood and tubular steel stepped into the spotlight.
Just as the notion of open-plan space was creeping into Western architecture, so furniture was freed from fulfilling just one function. Chairs became
increasingly ambiguous, with some made for indoor and outdoor use, and others equally at home in an office or dining room. Chairs became lighter, too, as they were frequently moved around the house.
With mass production in mind, designers began to concentrate their efforts on fixtures. The aim became
to produce a chair made of a minimum number of components that fitted together easily and quickly It’s no surprise, then, that the cantilever chair became so popular, as the continuous loop of legs and base eradicated the need for numerous nuts and bolts.
While the structure of the chair became increasingly celebrated in its design, as opposed to any stylistic conceits, so the designer as an
individual receded into the background. Industry became more important than art, as designers sought to express nothing more romantic than the manufacturing process.
The reason the chair dominated the focus of designers’ effort`_ is because a person’s emotional attachment is far greater to a chair than to, say, a shelving unit. If Modernist designers wanted to alter their audience’s emotional and intellectual outlook, it was through the chair that they tried to do so.
The slender armrests display a use of cushioning that is rare fora chair by Marcel Breuer.
The steel struts beneath the seat have been bowed so they cannot be felt by the sitter.
The chair is made from non-reinforced tubular steel, thereby making it less rigid.
B34 CHAIR WITH ARMS
The frame of this cantilever chair is made from one continuous loop of tubular steel. Although the base looks as though it is all in contact with the floor, the side pieces bend slightly so that only the corners touch the floor — the idea
being that most floors are slightly uneven and the smallest change in level would make the chair wobble. This chair has arms with elbow supports, and a blue canvas seat and back. Designed by Marcel Breuer and produced by Thonet. 1928. H:85cm (33Vzin); W.57.5cm (22Vain); D:63cm (24-Xin), Qu I
This armchair was inspired by a model made by Alvar Aalto. The chair’s seat and back are made from a single sheet of laminated wood and sit within an oak open-arm frame. H:76cm (30in) CA
LANDI CHAIR
This easy chair comprises a series of square-section planks of pine, joined by wooden dowels. It has a slatted section on both seat and chair back. Designed by Hein Stolle. c.1930. BonBay 2
SIDE CHAIR
The seat and back of this early cantilevered chair are made of ebonized moulded plywood and sit on a chrome-plated tubular-steel frame. The armrests are ebonized beech. Mart Stam for Thonet. c.1930. BonBay 2
ZIG-ZAG CHAIR
One of a pair, this chair has a tubular-steel frame reminiscent of Rietveld’s Zig-Zag chair. The wooden seat is supported on steel rods and has a later vinyl cover. H: 82.5cm (321in); W.41.5cm (161in); D:63.5cm (25in). Qu I
Lightweight and durable, this stacking chair is made from pressed and bent aluminium. Each armrest and pair of legs is from one piece of aluminium. Hans Coray. 1938. H: 76cm (290); W.51cm (19in); D:55cm (21in). BonBay 2
CLUB CHAIR
AALTO-INSPIRED CHAIR
EASY CHAIR
The rectilinear frame is made from stained pearwood secured with brass fittings. The chair is upholstered in hand-woven woolen fabric. Peter Keler, Bauhaus Weimar. 1925. H:69cm (27in); W.62cm (24V:ln); D:68cm (26%0). WKA
LOUNGE CHAIR
CANTILEVERED ARMCHAIR
One of a pair, this armchair has a tubular-chrome frame and seat with cushions upholstered in a dark brown, brushed fabric with red trim. The armrests are black-enamelled. H:86.5cm (34in). SDR I
Designed by Gilbert Rohde, this cantilevered armchair has a bright chrome base and black laminated armrests. The cushions are upholstered in ivory leather with a black trim. H:94cm (37in). SDR 1
THE STACKING CHAIR
STILL FOUND IN CAFES WORLDWIDE, THIS ICONIC DESIGN IS PERHAPS THE FIRST STACKING CHAIR, AND CERTAINLY THE FIRST WIDESPREAD DESIGN, OF ITS KIND.
The so-called Bistro chairs These have a pressed-steel frame and are painted red; with plywood seats. c.1926. H:82cm (32Vin). DOR 3
The origins of this chair, despite the efforts of numerous historians, have proved murky at best. The design is most likely to have been developed in France some time around 1925, specifically for the country’s booming cafe culture. The chair bears a strong, albeit rather crude, resemblance to chairs designed by Emile Jacques Ruhlmann, although it’s doubtful whether the French high-society designer ever had a hand in its conception.
What is perhaps most impressive about the chair, apart from its stackability, is its economy of materials. The steel used is incredibly thin and, to give the legs rigidity, the steel has been subtly curved. To save further on metal, holes have been cut from the seat back. While the perfect low-cost, space-saving chair was to become something of a holy grail for 20th-century furniture designers, few ever bettered the chair design that first set the ball rolling.
FREE SWINGER ARMCHAIR
The base of this chromed-steel cantilevered armchair from Austria is the only part of the structure that is exposed. The chair seat and back are filled with down and upholstered in sand-coloured velour. H:84cm (331in). DOR 3
LAMINATED LOUNGE CHAIR
This chair has been made from one sheet of cut and moulded laminated birch and resembles the Gerald Summers classic (see p.438). The arms are fixed to the back with metal brackets. Hans Pieck. 1944. H:76cm (30in). Bon Bay 4
BAUHAUS ARMCHAIR
This chair was designed by Erich Dieckmann for the Weimer Bauhaus, in collaboration with Ernst Mayo. Made from solid beech, it has a bowed back and slatted seat. c.1930. H:81.5cm (321:in); W.52.5cm (21in). WKA
DINING CHAIR
This is one of a pair of stacking birch plywood dining chairs that were produced by Artek. The chair has a circular wooden seat and a pierced plywood back, supported on L-shaped plywood uprights. c.1930s.
DIAGONAL CHAIR
This chrome-plated, tubular steel chair is named after the supports between the seat back and legs. The arms, seat, and back are of laminated wood. W.H. Gispen. c.1927. H:82.5cm (321-in); W-54cm (2111n): D:60cm (23,Xln). QU 2
SLATTED CHAIR
This Viennese chair has a tubular-steel frame and solid, stained-beech wooden slats for the seat and back. The arms have wooden armrests. One of a set of four. 1925. H:84.5cm (33V4in). DOR 3

Collectible Modernsm Period Furnture - Tables

Tuesday, August 11th, 2009

MODERNISM TABLES
AS WITH MOST FORMS of furniture
during the interwar period, tables were subjected to a radical process of reduction. All details deemed superfluous were stripped away to leave what designers considered to be a pure, practical form.
Marcel Breuer, the Hungarian-born student-turned-teacher at the Bauhaus, was the designer who most successfully achieved the desired, pared-down look. Utilizing tubular steel, a material that he is said to have borrowed from the bicycle-making industry, he produced tables that expressed little beyond their own function.
Eileen Gray’s tubular-steel and glass side tables, now known as the E1027 tables in reference to the house for which she designed them, may not be as rudimentary as Breuer’s tables, but they display more invention. The tops of the tables can be adjusted to sit at differing heights, and the table’s stem
is placed at the side to allow the table top to come over air item of furniture (which, in Gray’s case, was her own bed). Such versatility was to become a key feature in table design of the Modern era.
Since many designers in the interwar years were reacting to the excesses of the Art Nouveau style, most table tops were either a simple, unadorned circle or square. It wasn’t until after World War 11, with the advent of a more organic style, that this strict design principle was relaxed and irregular shapes came into use.
Glass, plywood, and tubular steel were always considered the most cutting-edge materials from which to make tables (due to their close association with industry), although some designers did use solid wood. If this was used it was considered important to avoid all efforts to carve or decorate it, thereby keeping its surface as clean to the eye as possible.
The tables “nest” so as to save space in small apartments.
The black-painted tops hide the wood grain and give the tables
an industrial look.
Chrome plating g) ves the tubular steel an alluring gleam.
NESTING TABLES
This series of four nesting tables fits neatly, one above the next, in a stack. They all have the same depth, but increase in width and height as they grow in size. Each table has a simple, rectilinear, chrome-plated tubular-steel
frame and a black-painted wooden top. The top sits flush with the table frame. Designed by Marcel Breuer at Bauhaus Dessau in 1925-26, it is thought that they were initially designed as stools. This example was re-issued by Toots in 2004. Largest table: H:60cm (231-,in);
W.66cin (26in); 0:38cm (151n). TEC 2

GLASS DINING TABLE
Made of tubular steel, the frame of this table consists of a rectilinear base. At the top, at each end of the table, is a semi-circular support for the glass table top that interlocks the base. There are rubber pads on the
supports, where they come into contact with the table top, to cushion the glass and prevent slippage. The glass top has been ground at the corners to produce smooth curves. Attributed to Emile Guillot and produced by Thonet, Paris. 1930. H:79cm (311m): W:120.5cm (471in); D:725cm (281in). WKA 4
BLACK-ENAMELLED TABLE
The chrome-plated tubular-steel frame of this dining table offers a support for the black-enamelled rectangular table top, before dropping to the floor in each corner to form the legs. Each leg is made from two parallel
lengths of steel. As the legs reach the floor, they join in the centre to form one single length of tubular steel below the table top. Designed by Wolfgang Hoffmann for Howell. W.147.5cm (581n). SDR 1
EXTENSION DINING TABLE
This extension dining table was made in America. The simple, straightforward design consists of a plain, rectangular wooden top with two pullout leaves. The leaves, which are concealed
underneath the table top, increase the table’s
width by 45cm (18m) on each side when extended. The top rests on a trestle base that ends in tubular-steel stretchers and bracket feet. Designed by Gilbert Rohde. Closed: W.152.5cm (60n7). SDR 2
SUNSHADE TABLE
This two-tiered end table is one of a pair. Each black laminate table top has a chrome trim. The smaller, top table sits flush with the tubular-steel frame, and the larger, bottom table is supported by the table base and legs. Designed by Gilbert Rohde for Troy. W.45.5cm (17Yin). SDR I
PALADAO DINING TABLE
This flip-top, wooden dining table has a simple rectangular top with rounded corners. It has two additional leaves for extending the table size and a fifth leg for extra support. The legs taper sharply as they reach the floor. Designed by Gilbert Rohde for Herman Miller. H:91.5cm (3617). SDR 1
TABLES 447
MODEL 91 TABLE
The rectangular top of this table is made from unlimed oak and has a black-linoleum surface. The corners have been slightly rounded. The table top rests on four rigid, chrome-plated tubular-steel legs. Designed by Marcel Breuer for Embru. c.1933. W.120cln (48io). DOR 4
SIDE TABLES
These side tables are made from chrome-plated tubular steel, where the table’s stand is placed to one side can be adjusted to raise or lower the height of the circular glass table lop to still a range of purposes. Designed by Eileen Gray. c. /9`/. 1) !z/( m (20in). DOR I
CAFE TABLE
The square top of this table has a black-linoleum surface with a riveted, plate-steel surround. It rests on four chrome-plated tubular-steel legs, which bend to meet each other in the centre above an X-shaped, tubular-steel base. The linoleum top is new. Produced by Thonet Mundus. (-.1930. H:75cm (291m). DOR 3
GAMES TABLE
The square, orange-laminate table top rests on a chrome-plated brass base. The base hinges in the centre, making the table collapsible. At each corner is a swivel plate for holding a glass. Designed by Boris Lacroix. c.1930. H:70cm (271in). DOR 3
BEECH SIDE TABLE
Designed and manufactured in Sweden, this small side, or occasional table has a circular, white laminate top above three bent-beech legs. The legs taper slightly as they reach the floor. Designed by Bruno Mathsson. 1936. D:44.5cm (17Yin). SDR 3
ROSEWOOD TROLLEY
The circular, rosewood top of this trolley table has hinged sides and rests on a chromium tripod base. The front wheels are also made from rosewood. The caster at the rear of the table is used to stabilize the trolley. H:56.5cm (221in); D:80ca) (311in). L&T
BAUHAUS SOFA TABLE
The table’s frame consists of a rectilinear, nickel-plated tubular-steel base, with a rectangle of tubular steel suspended below the circular, plate-glass table top. Designed by Marcel Breuer in 1929 and produced by Thonet. This example is a Tecta re-issue from 2004. H:60cn7 (231,in): D:80cro (311in).

Art Deco Ceramics.

Sunday, May 17th, 2009

Art DecoCeramics
In the 1920s and 1930s the Art Deco style filtered through into the designs of commercial ceramics manufacturers throughout Europe. Factories such as Sevres in France employed top designers to create fashionable pieces with such typical Art Deco motifs as stylized flowers, plants, female nudes, and exotic animals in bold colours. Commercially produced pieces survive
in larger numbers than those of artist-potters and are becomin with Geometric shapes an increasingly popular with collectors.
clean, functional forms were a legacy of the Bauhaus 1 Germany, being eminently suitable for mass production. British ceramics remained essentially traditional, but bold, bright Art Deco designs were produced by Clarice Cliff.
FRENCH ART POTTERY
Immediately prior to and following World War I, many potters continued to work in the tradition of the reform movements of the 19th century, in which the artisan was responsible for all phases of the production of his or her work. Most of these artist-potters were based in France and explored a wide variety of techniques, including
painting, sgraffito and crackle glazing. Many of them employed the typical Art Deco motifs of stylized female figures and animals, often representing episodes from Classical myths, or geometric forms.
An influential forerunner of the artist-potters was Andre Metthey (1871-1921), who produced richly coloured faience and stoneware vases with decoration designed by such well-known avant-garde artists as Henri Matisse, Andre Derain, and Edouard Vuillard. After World War I Metthey turned to painting his wares with pure geometric motifs of his own design, as well as stylized flowers, plants, and Classical figures in bright colours, usually in friezes or set in medallions.
In the early 20th century many French potters were strongly influenced by Oriental ceramics. Among these was Raoul Lachenal (1855–c.1930), who produced simple, symmetrical stonewares inspired by Oriental forms and painted with stylized floral or geometric patterns in strong, plain colours. Henri Simmen (18801969) was greatly interested in French peasant pottery, and worked with salt and flambe glazes before World War I. After the war he produced handmade stonewares, using natural products to create rich glazes. Simmen’s wares were sometimes incised with symmetrically placed
geometric motifs; ivory, precious wood, or horn lids, finials, and stands were carved by his Japanese wife, O’Kin Simmen. The early designs of Emile Decoeur (18761953) were in the Art Nouveau style, but in the 1920s and 1930s he rejected elaborate surface decoration in favour of pure, symmetrical, Oriental-style forms with a single, brilliantly coloured glaze.
One of the best-known figures in Art Deco French ceramics was Rene Buthaud (1886-1987), whose work is rare and highly collectable. In the mid-1920s he produced simple, bulbous vases and bowls with painted, crackle-glazed, or incised decoration, generally in brown tones. His designs of linear, stylized female figures were influenced by the paintings of Jean Dupas and by African art. Buthaud was among the artists who designed wares for Primavera, the design studio of the Printemps department store in Paris. The Longwy factory also produced wares for Primavera, including pieces with crackle-glazed grounds, which were used as a base for painted decoration.
The painter Jean Mayodon (1893-1967) turned to working in ceramics in 1912 but did not exhibit his pieces until after the war. His vases, bowls, and plates are painted in rich colours and decorated with Classical figures. As well as small decorative pieces, Mayodon produced panels and tiles, some of which were used for the French ocean liners of the 1930s. The French painter Raoul Dufy (1877-1953) collaborated with the Catalan potter Josep Llorens Artigas (1892-1980) on ceramic vases, fountains, and planters decorated with Duty’s trademark motifs of dancers, flowers, and nymphs.
COMMERCIAL WARES
Some of the highest-quality Art Deco ceramics were produced at Sevres from 1920, when the factory came under the direction of George Lechevallier-Chevignard. At the 1925 Paris Exhibition, Sevres displayed vases and tablewares with decorations designed by a number of eminent contemporary artists, including Suzanne Lalique (b.1899), daughter of the jeweller and glassmaker Rene Lalique 1860-1945), Jacques-Emile Ruhlmann
933), and the painter Jean Dupas (1882-1964). These wares were traditional in form but were elaborately embellished with Art Deco motifs. The restrained use of gilding to highlight or outline motifs is also a familiar feature of Sevres wares.
The Limoges firm of Theodore Haviland & Cie (est. 1-9–) also employed Suzanne Lalique and Duty and consequently produced pieces similar to those of Sevres. Lalique designed plates depicting grapes and vines in a palette of black, silver, and green, while Dufy’s wares featured foliage and floral motifs in bright colours. Tableware for Haviland by the glass designer Jean Luce 1895-1964) is characterized by gold-and-platinum stylized clouds, angular sunbursts, and zigzags.
In the 1920s and 1930s the design studios of Parisian department stores produced a wide variety of Art Deco wares for the mass market. La Maitrise, the studio of Galeries es Lafayette, produced a range of household wares manufactured in Belgium. The Compagnie des Arts Francais (est. 1919) produced a variety of utilitarian and decorative wares in an architectonic style, as well as tablewares such as tureens and vegetable dishes with heavy scrolls and floral motifs.
The most important manufacturer of Belgian Art Deco ceramics was the firm of Keramis, owned by Boch Freres, in La Louvriere. Its artistic director from 1907
was Charles Catteau (1880-1966), who designed simple, ovoid-shaped vases, with thickly applied glazes on an often ivory, crackle-glazed background. Like Lachenal, Catteau sometimes used patterns imitating cloisonne enamel, although in the 1920s and 1930s his favoured forms of decoration included Such animals as leaping gazelles and stylized pendant flowers and plants.
In Italy the architect Gio Ponti (18911979) created a range of wares between 1923 and 1930 for the porcelain manufacturers Richard-Ginori (est. 1896) in Doccia. His range included tableware, vases, and urns, which were painted with strongly stylized geometric patterns, architectural forms,
figures, or drapery.
FIGURES
Most French figurative ceramics reflect the general trend for stylized forms. Among the earliest Art Deco examples are the porcelain tea- and coffee-sets (1916-17) designed by the Swiss sculptor Edouard Marcel Sandoz (1881-1971) for Haviland. The teapots, creamers, and other items are modelled as formalized, angular animals and birds. The Parisian firm of Robj produced useful wares in the form of brightly coloured, almost toylike figures in national dress or representing different professions.
From 1928 the Italian firm of Lenci (est. 1919) in Turin produced earthenware and porcelain figures, mainly of women, either nude or in contemporary dress. These figures are more naturalistic than most French examples and are distinguished by elongated limbs, bright-yellow hair, and a combination of matt and glossy glazes. Most Lenci designers are anonymous.
French art pottery
• DECORATION sgraffito, painting, and crackle glazing
• INSPIRATION Classical and Oriental wares
Marks
Buthaud: painted “R. Buthaud”, or painted or incised monogram “RB”
Primavera: Dufy/Artigas: each piece w0.V
should be individually numbered (1-110) C)
Sevres
• STYLE conventional forms based on 18th-century designs are typically decorated with stylized leaves and flowers, and geometric patterns; gilding is common
• COLLECTING pieces are high quality so are relatively expensive even though mass-produced
Keramis/Boch Freres
• FORMS simple, ovoid shapes
• DECORATION patterns imitating cloisonne enamel; stylized flowers, plants, or animals; colours: turquoise, also blue, black, green, and brown
France
• FORMS useful wares such as tea- and coffee-services and decanters, as well as decorative pieces, made in the form of stylized animals, birds, or human figures
Lenci
• FORMS figures of women, nude or in stylish modern dress, often wearing hats; mostly single subjects
• GLAZES matt often combined with shiny finish
• COLLECTING sophisticated pieces most sought after
COMMERCIAL WARES
In Germany, the Bauhaus (est. 1919) opened a ceramics workshop at Dornburg near Weimar, but ceramics were abandoned when the school moved to Dessau in 1925. However, the pure, functional forms used by Bauhaus designers did have some influence on mass-produced ceramics. In 1930, at the State Porcelain Factory in Berlin, Marguerite Friedlander-Wildenhaim (1896-1985), a former Bauhaus student, created the simple, geometric designs of the “Halle” service. Geometric shapes, with soft, rounded contours, were also used by Dr Hermann Gretsch for his designs for the “Arzberg 1382″ service of 1931, which was manufactured by the Carl Schumann factory in Arzberg.
Among the factory’s most collectable products today are its terracotta wall masks. These elongated, highly stylized female faces are hand-painted in bold colours, typically red, yellow, green, and black, and usually have
brightly coloured hair in ringlets. The firm also had a subsidiary in Paris, which at the 1925 exhibition displayed Cubist-inspired, angular statuettes with simplified features. In the late 1930s the British firm of Myott, Son & Co. Ltd produced Goldscheider figures. These pieces, clearly marked with their origin, are less collectable than Goldscheider figures made in Austria.
In Germany, fine-quality, detailed, naturalistic porcelain figures of dancers in colourful costumes, women in modern dress, and animals were produced by the firm of Rosenthal (est. 1879) in Selb. However, some of its most distinctive figures of the late 1920s and 1930s are very different in style; modelled by the artist Gerhard Schliepstein (b.1886) they depict svelte, elongated, and stylized women and greyhounds in pure-white porcelain. The Art Deco taste for the exotic was reflected in the figures of snake-charmers, Spanish dancers, and belly-dancers made by the Dux porcelain factory in Bohemia in the 1920s and 1930s.
Among the most distinctive Art Deco ceramics are those designed by Wilhelm Kage (1889-1950), artistic director of the Gustavsberg porcelain works in Sweden. His “Argenta” range of hand-thrown or moulded green-glazed vases, bowls, plates, and boxes (1929-52) is inset with chased silver in typically Art Deco motifs of mermaids, nude female figures, and flowers. Such wares are becoming more popular with collectors but are still relatively inexpensive.
FIGURES
Along with tableware, figures are among the most widely collected Art Deco ceramics today. While some factories continued to produce figures of traditional subjects, such as characters from the Italian commedia dell’arte, many Art Deco figures represent women, either nude or in contemporary dress. Some are accompanied by elegant greyhounds or borzois. Stylized human, animal, or bird figures and wall masks, influenced by contemporary Cubist abstract sculpture, were also popular during this period.
During the 1920s and 1930s the Vienna firm of Goldscheider (1885-1954) was one of the few Austrian producers of earthenware and porcelain in the Modern style. Figures made by Goldscheider include dancing couples in contemporary dress, ballerinas, and Pierrettes from the commedia dell’arte. Colours are typically rich and contrasting, and costumes are exotic.
German commercial waresSTYLE
• , usually influenced by the Bauhaus designs; simple, geometric shapes are typical, often with soft, round contours
Gustaysberg porcelain works
• STYLE Argenta tablewares, vases, and boxes with green-glazed grounds, inset with chased silver motifs; some with diaper-patterned or floral borders
• COLLECTING Argenta wares are increasingly collectable; hand-thrown pieces are more heavily moulded
Marks
Printed in black or gold ( 1910-40) 19
Goldscheider
• FORMS figures of couples in modern dress, dancers, and stylized wall masks
• COLOURS wall masks are painted in bright tones of red, yellow, green, and black
• CONDITION masks are prone to chipping as they are made of earthenware; paint may also be worn
American Art Deco ceramics were mainly inspired by European design, and today many collectors in the USA actually prefer French Art Deco porcelain or pottery to American-made pieces.
COMMERCIAL CERAMICS
Cleveland, Ohio, was the centre for progressive American ceramics during the inter-war years, owing to the influence of Julius Mihalik, a Viennese professor at the Cleveland Institute of Arts and follower of the Wiener Werkstatte. Several students and independent designers worked for the Cowan Pottery, founded outside Cleveland in 1913 by Reginald Guy Cowan 3. 19 30). Cowan designed most of the pottery’s early pieces himself; these consist mainly of inexpensive, slip-cast earthenware figures and figural “flower frogs” with matt monochrome glazes. The work of independent designers, generally made after 1927 for the Cowan Pottery Studio, was often issued in limited editions, and is most collectable. Some pieces show a distinctly Austrian influence, while others, particularly the work of Paul A “Jazz” punchbowl by Victor Schreckengost for the Cowan Pottery Studio
-,-is well-known design depicts scenes of New York City on New Year’s
and is glazed in “Egyptian Blue”. Each piece in the rare limited edition of 50 is slightly different A commercial, mass-produced edition also exists. (1931; ht 20cm18in; value of limited-edition bowl K)
Manship (1885-1966), are sculptural. The designs of Waylande Gregory (1905-71), who worked at Cowan from 1928 and later at the Cranbrook Academy of Art in Bloomfield Hills, near Detroit, Michigan, are often Neo-classical in inspiration.
A famous allegorical image, “Radio”, personifies the medium as a woman depicted in the Classical style, holding a lightning bolt.
The Rookwood Pottery (est. 1880) of Cincinnati, Ohio, produced an extensive range of Art Deco ceramics, mostly figures, bookends, and paperweights, in monochrome glazes. The Art Deco wares of the Roseville Pottery, in Zanesville, Ohio, are generally considered inferior to those of Rookwood, but such lines as “Futura”, introduced in 1928, are lively and attractive, which
makes them of greater interest to collectors. Most common in this line are well-marked vases featuring angular handles or “skyscraper” stepping.
In 1936 Frederick Hurten Rhead (1880-1942) introduced the “Fiesta” line for the Homer Laughlin China Co. (est. 1877) in East Liverpool, Ohio. This was a popular kitchenware in vibrant colours. Collectors are widespread, and Fiesta is sold at special auctions throughout North America. Comparable to Fiesta ware are the monochrome teapots and dinnerware in streamlined style made at the Hall China Co. (est. 1903) in East Liverpool; like the Fiesta range, these have been authentically reproduced.
STUDIO POTTERY
Studio potters active in the inter-war years in the USA include Susi Singer (1895-1949) and Vally Wieseltheir (1895-1945), who were both potters at the Wiener Werks6tte before emigrating in 1932. Typical . pica] of their work are hand-modelled earthenware figures, most of which are clearly signed. Wieseltheir produced designs for General Ceramics in New York. From 1923 to the early 1930s the designer Wilhelm Hunt Diederich (1884-1953) made a limited amount of pottery, rare and now highly sought after, at his studios in Woodstock, New York. Other potters of note include Henry Varnum Poor (1888-1971), Carl Walters, and Maija Grotell.
Cowan Pottery
• COLLECTING Cowan Pottery Studio is the most collectable commercial ware; pieces by independent designers after 1927 (especially limited-edition “Jazz” bowls) are more collectable than early
pieces
Marks
Most pieces are impressed or printed with marks showing artist’s name or monogram
Other commercial ceramics
• ROOKWOOD Art Deco pieces are less collectable and valuable than pre-1914 pieces, although colourful, abstract-patterned vases are popular with collectors
• ROSEVILLE more collectable than Rookwood; “Futura” is most popular; beware of modern forgeries, which arc difficult to distinguish from originals
• FIESTA made until 1972 and reintroduced in 1986; widely collected in USA; early pieces include red (most desirable), blue, yellow, green, and ivory (least popular); most new colours are pastel; modern versions are widely available
Studio pottery
• TYPES various pieces, including polychrome, hand-modelled earthenware figures, and platters hand-painted with stylized figures and animals
• VALUE pieces by independent studio potters are higher in value than mass-produced ceramics
• COLLECTING wares arc generally signed by the artist; work by Hunt Diederich is rare and very collectable
Art Deco had little immediate impact on the forms of commercial British ceramics; most firms simply added the newly fashionable, brightly coloured, geometric, and abstract designs to existing shapes. By the late 1920s the success of such innovative designers as Clarice Cliff (1899-1972) encouraged others to develop original shapes alongside traditional ranges, and by the 1930s the influence of Modernism was evident in the increasingly functional and geometric forms of tableware, minimally decorated in neutral matt glazes. A whimsical trend in ceramics continued in the range of popular ornaments, from Wedgwood’s sculptural animal designs to porcelain figures embellishing such items as dressing-table wares.
CLARICE CLIFF
British Art Deco ceramics are virtually synonymous with Cliff. In 1916 she joined the firm of A.J. Wilkinson Ltd (est. 1896), near Burslem, Staffordshire. In 1920 the firm acquired the nearby Newport Pottery and its range of old-fashioned white wares, and, recognizing Cliff’s talent, set her up in a studio there. Cliff and her team of decorators hand-painted biscuit-fired tablewares with brightly coloured enamels over a distinctive ivory-coloured glaze, known as “honey” glaze. In January 1928 the “Bizarre” range of inexpensive and cheerful pottery for or everyday use was launched; by October of the same year the range had become hugely successful. Cliff went on to design more than 500 shapes, including the “Conical”, “Bonjour”, and “Stamford” ranges, and 2,000 patterns, including “Inspiration” (now rare and desirable), “Applique”, “Tennis”, “Sunray”, “Solitude”, and “Mountain”. As well as traditional shapes, she designed many futuristic or otherwise innovative forms,
such as beehive-shaped honey-pots, cone-shaped sugar-sifters, and highly stylized, geometric versions of conventional items. The majority of her output was tablewares, but she also produced a range of novelty wares, among the most collectable being figures and the newly fashionable wall masks, which usually depicted the subject face-on and featured a floral headdress. Cliff also commissioned designs from other artists, among them Laura Knight ( 1877-1970), who produced the now highly collectable “Circus” series.
SUSIE COOPER
Although somewhat overshadowed by Cliff’s bright, flamboyant designs, Susie Cooper (1902-95) designed an equally distinctive and now sought-after range of shapes (including “Kestrel”,
“Curlew”, “Wren”, “Jay”,
“Falcon”, and “Spiral”) and
patterns (including “Dresden
Spray”, “Tadpoles”, “Scarlet
runner beans”, “Nosegay” “Polka
dots”, and “Cromer”). In 1922 she
undertook a work placement with
A.E. Gray & Co. Ltd (1912-61) in
Hanley, Staffordshire, and her success
in designing surface patterns in lustre
pigments and enamel colours for bought-in
white wares was such that she was given her
own mark. By 1929 she had established a ceramic decoration company at George Street Pottery, Tunstall, and by 1932 was designing her own shapes; these were produced at Wood & Sons, in Burslem, Staffordshire, where Cooper had her own production unit, Crown Works. Most sought after are her tablewares in traditional, rounded shapes such as “Kestrel”, “Curlew”, and “Wren”. Other early and desirable ranges include the more brightly coloured, abstract, geometric designs such as the banded patterns, polka dots, and exclamation marks produced for the large retail outlets of the John Lewis Partnership in the early 1930s. Her hand-painted designs were carefully adapted for transfer-printing, and the two methods of decoration are virtually indistinguishable and equally collectable. After World War II Cooper produced light, translucent, bone-china teawares made in Longton and sent to Burslem for decoration; these are less collectable.
WEDGWOOD AND DOULTON
The commercial giants Wedgwood (est. 1759), in Burslem, Staffordshire, and Doulton & Co. (est. 1815), in London, both produced ranges of functional tablewares and purely decorative Art Deco pieces. For Wedgwood the Modernist architect Keith Murray (1892-1981) designed a range of simple, geometric forms, including vases and bowls, with lathe-turned decoration and semi-matt glazes, often in soft grey, green, and ivory white. In complete contrast to Murray’s plain, functional designs were Wedgwood’s more conventional, intricately decorated lustrewares, the most popular and expensive of which was the “Fairyland” series.
Although the imagery on the “Fairyland” pieces bears no resemblance to that usually associated with Art Deco, the original shapes and bright colours are typical of the period, and the success of Wedgwood’s lustrewares inspired other manufacturers to produce more strictly Art Deco lustre ranges. From 1926 the modeller and sculptor John Skeaping (1901-80) designed a range of 14 stylized Art Deco earthenware animals and birds for Wedgwood in black basalt, cream, celadon, and tan glazes; these pieces proved popular and were produced well into the 1950s.
Doulton produced a range of Art Deco tableware –such as the “Dubarry” dinner service – but it is the company’s decorative bone-china figures of the 1920s and 1930s, many designed by Lesley Harradine (1887-1965), that are particularly collectable
toda.
These figures, most of which are full length, usually depict young, fair-skinned women in informal poses, and as such are celebrations of women’s increasing freedom and independence.
OTHER FACTORIES
The Art Deco wares produced by the Shelley Pottery Ltd (1872-1966; originally Wileman & Co.; trading as Foley 1892-1925, and as Shelley from 1925) owe their continuing popularity at least in part to the talented designers employed by the company in the 1920s and 1930s. These include the illustrator Mabel Lucie Attwell (1879-1964), who in 1926 introduced a range of charming nursery wares. In 1930 Eric Slater (1).1902) introduced two new, Modernist forms – “Vogue” and “Mode” – in clean, streamlined, architectural shapes that were perfectly suited to Shelley’s fine bone china. However, more successful was the “Eve” range of
tablewares, introduced c.1932, combining practicality with stylish, geometric design; it featured cup rims narrowed to prevent heat loss, and
triangular handles pierced, rather than
solid, for easier handling.
The Poole Pottery in Dorset (est. 1873
as Carter & Co.; trading as Carter, Stabler
& Adams from 1921, and from 1963 as
Poole Pottery, the name now also used to
describe early wares) produced collectable
Art Deco tablewares during the 1930s. Designs include “Studland”, which has elaborate angular handles combined with a
plain body of mottled green or blue, or the fashionable leaf and floral pattern; “Picotee” and “Everest” in plain colours with solid diamond-shaped handles, and rounded and ribbed shapes respectively; and “Streamline”, which as the name suggests was influenced by the American streamlined style.
The Carlton Works at Stoke-on-Trent (est. 1890; from 1958 Carltonware Ltd) produced a distinctive range of ceramics during this period. Rare and highly sought after are their geometric-shaped vases, hand-painted in bright contrasting colours. The success of Wedgwood’s lustrewares inspired Carlton to produce a range of richly coloured pieces, featuring enamelled decoration
on a dark glaze and a pearlized effect on the interior. Most of the company’s production took the form of moulded tableware, with leaf-moulded dishes being especially common.
Clarice Cliff
• DESIGNS strong geometric forms in bold, bright colours; some traditional shapes
• BEWARE fakes proliferate: check for washed-out colour,
poor-quality painting, and an uneven or murky glaze
• COLLECING increasingly rare and expensive; pieces are collected by pattern or type; desirability is determined by pattern, shape, and condition; wall masks and “Age of Jazz” figures are highly sought after
Marks
Most pieces marked, with the pattern
name alongside the signature, and a 00″‘ stamped factory mark
Susie Cooper
• DESIGNS traditional, rounded forms; tea-sets usually in autumnal colours
• COLLECTING pre-1939 wares are most collectable; archive catalogues help to distinguish between pre-and post-war issues of the same designs; hand-painted, transfer-printed or lithographed designs
arc all equally collectable
Marks
Printed in brown on carthcnwares from c.1932
Major manufacturers
• DESIGNS Murray for Wedgwood: geometric, often ribbed pieces; Doulton figures: young women, typically bathing or dancing; Shelley: architectural forms with conical bodies and solid, triangular handles; Poole: streamlined shapes produced in combinations of subdued, two-colour glazes
• DECORATION Carlton: flowers, butterflies, chinoiserie, and silver-lustre lightning motifs are typical
• COLLECTING a wide range of tablewares is available; porcelain figures command premium prices;
Wedgwood: designs by Murray and Skeaping are highly sought after, particularly Murray’s lathe-turned wares, “Annular” teawares, and the “Bournvita” drinking set; Shelley: designs by Slater are highly desirable; Carlton: leaf-moulded forms are abundant but not popular with collectors
Marks
Poole Pottery: almost all pieces are impressed with this mark or the entwined initials “CSA” and will include the decorator’s monogram; few pieces are dated

Art Deco American Furniture

Thursday, May 14th, 2009

The late 1920s saw the emergence of a Modern movement” of innovative American furniture designers. Inspired by European immigrants, including several key members of the Bauhaus, they explored new materials such as tubular metal. American Modernism was relatively small-scale, but it set the stage for a generation of industrial designers who from the mid-1930s reshaped interiors with enormous flair.
American Art Deco furniture falls into three broad categories: commercial copies of formal French pieces in exotic wood veneers and inlay; innovative and avant-garde work, which was never produced in large quantities and is scarce today; and industrially produced, mostly metallic and laminated wood furniture, based loosely on Bauhaus concepts. Produced from the 1930s until after World War II, this third category is much collected today.
PAUL T. FRANKL
Frankl (1886-1958), an Austrian architect and engineer, emigrated to the USA at the outbreak of World War I. He began designing and manufacturing furniture in New York City c.1920, working in a traditional European formal style. By the mid-1920s he was designing economical, compact, practical, modular furniture, inspired in part by the architect–designers Walter Gropius (1883-1969) and Le Corbusier (1887-1965). The best Frankl furniture (1925–c.1930), produced Linder the tradename “Skyscraper”, was inspired by the evolving New York skyline. Bookcases and tall cabinetry of stepped, rectilinear form are typical, often with a black, red, or pale-green lacquer finish with silver-leaf edging. Natural woods, including California redwood and oak, were also used, with a red, black, or silver trim.

Dressing tables, desks, and mirrors arc also found, often with mirrored-glass tops or shelving and Bakelite drawer-pulls, which suggest a slightly later date. Bookcase cabinets usually have simple wooden pulls. Skyscraper furniture was designed to be economical, and standards of cabinetry are basic.
During the inter-war years Oriental interiors were extremely fashionable in the USA, and Frankl produced lacquered furniture such as dining-chairs, cocktail bars, dressing-tables, and small tables, usually in black, pale green, or red with gold- or silver-leaf details, sometimes with brass fittings. This furniture is less popular than the Skyscraper range, because collectors prefer pure, Modernist lines, particularly if they evoke the works of the Dutch
painter Piet Mondrian, who was
also inspired by mid-1920s New
York architecture.
DONALD DESKEY
The designer Donald Deskey
(1894-1989) collaborated with Frankl during the late 1920s,
designing screens and large
cabinetry in lacquered and metallic-leaf finish with vivid, jazzy
decoration featuring zigzags. He also produced more mainstream designs for numerous other American manufacturers, working mostly in hardwood veneers. He is best known as the principal interior designer for New York’s Radio City Music Hall,
which preserves many of his pieces in situ. Pieces with Radio City provenance occasionally appear on the market and are eagerly sought.
Between 1927 and 1931 Deskey worked in partnership with Phillip Vollmer, designing furniture in Bauhaus taste, made of metal and glass, sometimes together with Bakelite and cork. Most of Deskey’s work is unsigned, but his designs are well recorded in contemporary catalogues, and many specialist dealers in the USA recognize them.
FRANK LLOYD WRIGHT
Frank Lloyd Wright (1867-1959) is one of the best-known and most influential American architects and designers. Any designs attributed to him command a premium, particularly the Modernist oak creations from the first decade of the 20th century. However, his later post-war commercial furniture, mostly oak and maple tables and low, horizontal seating, is currently of little more than decorative value.
Most of Wright’s work cannot be considered Art Deco, but some of his furniture of the inter-war years appeals to Art Deco enthusiasts. The best examples were designed for Wright’s residential buildings, and are therefore extremely scarce. Pieces for commercial interiors were made in larger numbers and are more common today. Enamelled metal furniture, such as that made for Wright’s S.C. Johnson Administration Building (Wisconsin) in 1937, and several types of wooden chair are relatively common on the market.

THE CRANBROOK ACADEMY OF ART
In 1925 the Finnish architect Eliel Saarinen (18731950) began work on the Cranbrook Academy of Art in Bloomfield Hills, near Detroit, Michigan. In 1932 he became president and art director of the academy, serving there until his death. The building retains many of the original furnishings that he designed.
In most of Saarinen’s designs a formal, Scandinavian influence is evident in the elegant lines and relatively small scale, although some are comparable to the more organic style of the Wiener WerkstRte designer Dagobert Peche (1887-1923). Saarinen preferred rich wood veneers and natural materials, which he sometimes Used in combination with steel or polished metal.
The Cranbrook Academy, like the German Bauhaus school, is best known for its influential alumni. The most celebrated Cranbrook graduates from the 1930s are Florence Knoll (b.1917), whose name appears on much American Modernist furniture made under her direction; Charles Eames (1907-78), who designed laminated wood, leather, and fibreglass furniture for the Herman Miller Co. and others from the late 1930s; and Eero Saarinen (1910-61), Eliel Saarinen’s son, who collaborated with Eames as well as pursuing an independent career as both an architect and a furniture designer. Popular designs were produced over several decades (some are still made); earlier pieces can be identified by tags and generally higher-quality craftsmanship, as well as by wear and tear. Followers of Eames whose work is of interest to collectors include Gilbert Rohde (1894-1944), who designed Bauhaus-influenced tubular steel furniture produced by the Herman Miller Co., and George Nelson (1907-86).
OTHER AMERICAN ART DECO FURNITURE During the 1930s, American Modernism took root throughout the USA, partly because so economical a style of design was appropriate to a country in the grip of the Depression. Leading designers include Russel Wright (1904-76), Walter Dorwin Teague (1883-1960), and Raymond Loewy (1893-1986), who all specialized in industrial-style commercial products and lighting, using new materials such as aluminium, chrome, and plastic. Karl Emmanuel Martin (”Ke”) Weber ,1889-1963) studied under Bruno
Paul in Berlin before moving to California in 1914. He designed both individually commissioned and mass-produced furniture, typically in laminated wood, chromed metal, and sprung steel.
The architect Eugene Schoen 1880-1957) designed elegant furniture in Modernist materials including glass and nickel. Examples of tubular steel furniture influenced by the
Bauhaus include -pieces designed by Wolfgang Hoffman (1900-69), son of the famous Austrian designer Josef Hoffman (1870-1956), during the 1930s. Prestigious firms included John Widdicomb, Johnson Furniture, and Barker Brothers Furniture Co., all in Los Angeles, and S. Karpen of Chicago, all of which employed leading designers.

Paul T. Frankl
•    COLLECTING rarely found outside New York City; Oriental style is less popular than Skyscraper; collectors prefer signed pieces in unrestored condition; surface restoration is common as decoration is easily worn
Marks
Authentic Skyscraper pieces are stamped “SKYSCRAPER FURNITURE, Frank) Galleries, 4 East 48th Street, New York”
Donald Deskey
•    VALUE interesting provenance, such as Radio City Music Hall, adds greatly to value
•    COLLECTING Deskey-Vollmer signed pieces are more desirable than Deskey’s later, traditional designs; vivid, jazzy designs are very collectable – beware of fakes
Marks
Some pieces of Deskey-Vollmer have a metal tag
Frank Lloyd Wright
•    COLLECTING Art Deco style is less valuable than pieces from c.1900 to 1910, but more valuable than post-1945 pieces; original condition is all-important; provenance from notable interior schemes adds greatly to value
Marks
Wright furniture is rarely marked, but is well documented and easily identifiable through style
Saarinen and The Cranbrook Academy of Art
•    COLLECTING Saarinen: designs are scarce but well documented; Eames: very collectable, particularly early work
Other designers
•    COLLECTING identifiable pieces by lesser-known American designers are rare but still not greatly sought after; provenance is important in determining value; commercial furniture is less valuable than domestic
Marks
Pieces are rarely signed by the designer but may bear a maker’s or retailer’s mark; Weber pieces may bear a tag from Lloyd Manufacturing Co.