Posts Tagged ‘quality plates’

18th-19th Century Silver Entree Dishes and Sauceboats
Entree dishes and sauceboats were among the new items of dining silver introduced in France in the late 17th century. French fashion changed European tastes in food: as the new trend developed, the typical plain roast meat served with cold sauces was replaced by soups, stews, and dishes accompanied by hot sauces made from seafood or veal stock, ham and bacon, and herbs and spices. Silver was a particularly useful material for vessels containing these hot foods as it retains heat well. In the 18th century dishes and sauceboats were decorated en suite with plates, tureens and other dining utensils, as the complete dinner service with matching ornaments became the height of fashion.
SILVER ENTREE DISHES
Entree dishes were used for serving the “entree” – the first course of cooked food that came before the main meat course – for example, small game such as hare, pheasant, or partridge. From about the middle of the 18th century they were also known as “hash” or “curry dishes”, from the hot and spicy curries that were introduced to Britain via its extensive trade with India. Today, entree dishes are more popular for serving vegetables or salads.
Made in various sizes and often in pairs or sets of four, these dishes are shallow with a flat bottom and/or four low feet and usually a domed cover with a handle. As with candlesticks, single entree dishes are generally less collectable than a pair or set. The handles, which are sometimes wooden on early examples, are generally detachable, so that the cover can be used by itself as a separate dish. The cover should always fit comfortably into the dish, and both should bear the same marks. Some entree dishes had Sheffield-plate covers, possibly to reduce the cost of the whole piece.
Entree dishes from the mid- and late 18th century are usually oval in form, with a handle on the cover and very little ornament other than gadrooning or fluting around the edges. The finest entree dishes have heavy cast handles in the form of a family crest, but simple reeded or plain ring handles, with leaf decoration covering the locking plate, are more common. Most examples are also engraved with a coat of arms, but some pieces have a coat of arms on the cover and a crest on the base. Those made in the late 18th century tend to Lie much lighter than earlier ones, as the gauge of metal used was considerably thinner. Such pieces should therefore be carefully checked for denting or splitting.
In the early 19th century entree dishes became larger and heavier, with a more pronounced domed shape to the cover, and with ornate cast handles sometimes in the form of vegetables, reflecting the contemporary taste for naturalistic ornament. Shapes became more varied, being square, oblong, round, and cushion-like as well as oval. The simple gadrooning around the rims was often replaced by more elaborate reeding interspersed with flowers, scrolls, or shells.
To keep the food warm, the dish was generally placed either on a dish cross (incorporating a burner) or, from the early 19th century, on a plated heater base, usually made from Sheffield plate, which contained hot water or a block of heated iron. Only a very few entree dishes are found today with their original heater base.
Fewer dishes were being made for the entree course by the mid-19th century, principally because the custom of laying out dishes on the table so that diners could help themselves was replaced by the practice of servants serving food to each of the diners individually as they moved around the table.
SILVER SAUCEBOATS
First introduced c.1715, sauceboats were used for serving gravy or the rich, thick sauces that accompanied meat and fish dishes. They were often made in pairs, and sometimes in sets of four or six for larger services. Like other items commonly made in pair or sets, a single sauceboat is generally less desirable than a pair. The earliest examples of the George I period were double-lipped and stood on a flat oval base with simple scroll handles on either side of the body. The only decorative features were the moulded, wavy rim and engraved armorials. However, this form, which was copied by early European porcelain manufacturers, proved impractical for pouring, and by c.1725 the familiar bulbous form of sauceboat had appeared, with its single everted (out-turned) lip opposite a handle. It was first made with a central pedestal foot; three or four cast hoof, shell, or scroll feet were introduced in the 1740s, and cast masks or shells applied where the feet joined the body. Some sauceboats were made with a matching circular or oval stand and ladle and sometimes a cover.
The body of the sauceboat was generally raised from a single sheet of silver, so no seaming should be evident. For practical reasons, decoration was restricted to gadrooning or punching to strengthen the wavy rims and the shells or masks where the feet joined the body, although crests were sometimes engraved on either side
of the body or under the lip. Cast double-scroll handles were usual until c.1745 and flying-scroll handles (with only one end joined to the body) thereafter, sometimes with leaf decoration.
The sauceboat was a form particularly well exploited in the 1730s and 1740s by the best Rococo silversmiths, often of Huguenot descent – in England, Paul Crespin (1694-1770), Paul de Lamerie (1688-1751), and Nicholas Sprimont (1716-71) – who produced shell-shaped bodies with ornate cast handles
in the form of dolphins, caryatids, birds, griffins, and animals, and cast and applied shells and marine creatures. The bodies of Rococo sauceboats are also sometimes decorated with cast and applied scrolls
and cartouches. Some of the highest-quality sauceboats are gilded inside. Among the finest examples of this period are the set of naturalistic shell-shaped sauceboats with sculptural figural handles made by Sprimont in 1743-4 for Frederick, Prince of Wales.
The prevalence of sauceboats with shell-and-fish motifs indicates the popularity during this period of rich sauces made with fish. Some rare examples have
a body with a double thickness of silver, to be filled with hot water to keep the sauce warm at the table.
In the 1770s the central foot
again became fasionable and bowls were deeper, with a tall loop handle replacing the
scroll handle. However, sauceboats were generally superseded by sauce tureens in this period, although they returned after the 1820s. In the 19th
century, sauceboats were often made in 18th-century styles as part of a ceramic dinner service. Common features of 19th-century sauceboats include a heavy cast foot, applied shell decoration, leaf-capped scroll handles, and three feet. The shell shape was also revived
and was produced in Sheffield plate as well as silver; similarly, the early double-lipped sauceboat was popular in the 1820s and 1830s; examples of this date can be distinguished from the early 18th-century versions by their high, inward-curving handles. Sauce-boats of this period were commonly produced in large sets of varying sizes, especially in response to the expansion of the hotel and catering trades after the mid-19th century.
Entree dishes•
DESIGN the cover may have gadrooned rims on the inside to match the base when turned over and used as a dish.
• CONDITION the cover and handle should both fit properly; lead may show on Sheffield-plate examples –this is caused by bleeding from lead-filled plated and applied handles under heat.
• COLLECTING most entree dishes found today are not in good condition because they have been subjected to considerable use – only the best are collectable; lack of detachable handle (or handle soldered on) reduces value; plated heater bases are often found separately.
Marks
The cover and dish should bear the same marks; armorials on the cover should match those on the base
Sauceboats
• CONDITION the handle should be securely attached –seaming under the handle may indicate repairs; pieces in good condition, raised from a single sheet of silver, should have no seaming; rims are thin and often damaged or repaired; feet are vulnerable to damage.
• COLLECTING pairs are more valuable than singles.
Marks
These are under the body on three-footed pieces and on the edge or inside the foot on pieces with a central foot.

Decorative tableware
In the 18th and 19th centuries the utilitarian plate on dining-tales was complemented by richly
decorative pieces such as bread-, fruit- and cake-baskets, epergnes, and centrepieces. Made as much to display wealth as to be practical, these are characterized by high-quality casting, chasing, and, especially on baskets and epergnes, piercing. Such objects are among the most popular with collectors today because they are particularly attractive as
display pieces on a table.
SILVER EPERGNES
First used at the French court in the 1690s and in England c.1715, the epergne was an elaborate centrepiece for the dinner-table or sideboard. The name “epergne” is probably derived from the French word epargner, meaning “to save”: space could be saved on the table by
bringing together several dishes on one stand. By the 1740s the epergne was associated with the dessert course and generally took the form of a central
pierced basket surrounded by four to six pierced dishes or baskets for holding fruit or sweetmeats. It was most popular during the mid-18th century, when the light and delicate pierced forms, often ornamented with cast shells and flowers, were particularly suited to the Rococo style. Some epergnes, particularly those by the leading English maker Thomas Pitts (c.1723-93), demonstrate the contemporary vogue for chinoiserie, with their pagoda-like canopies with suspended bells.
In the 1760s and 1770s epergnes became wider and headier with the addition of more baskets, and in the 1-80s the influence of the Neo-classical style was
evident, with simpler oval or circular baskets, sometimes with blue glass liners, and decorated with Vitruvian scroll borders and swags. The leading specialist maker of epergnes in late 18th-century England was Thomas Pitts’s son William Pitts (active 1781-1806). Like other silversmiths, he offered clients a choice between more expensive epergnes, which had cast branches and decoration, and less expensive examples with mechanically produced ornament.
Heavier and more solid than 18th-century examples, Regency epergnes are usually mounted on a heavy Square or round foot, with branches ending in large floral sockets supporting cut-glass bowls rather than pierced silver baskets. Very few epergnes were made after this period, as they were generally replaced by the ornamental centrepiece.
SILVER CENTREPIECES
Large centrepieces as a decorative focal point for the dining-table or sideboard have always been among the most expensive items of plate and were often displayed as a sign of the wealth and status of the owner. One of the most famous and inventive pieces is the English silver-gilt Poseidon or Neptune centrepiece of 1741, made for Frederick, Prince of Wales. It features an elaborate stand of sculptural cast dolphins and mermen and is decorated with shells and marine creatures. Although this piece bears the maker’s mark of Paul Crespin (1694-1770), it may in fact have been designed and made by Nicholas Sprimont (1716-71 ); both were
leading English Huguenot makers of Rococo silver. The centrepiece was made with many matching salt-cellars and sauceboats, as befitting a grand table service for a royal patron.
Regency and Victorian centrepieces from the
19th century appear more frequently frequently at auctions today (although North American pieces are rare). Made with or without branches for candles, they usually have a central bowl, either solid silver or pierced with a glass liner, for fruit or sweetmeats. Centrepieces with all their original glass liners are rare today. Female caryatid figures supporting a bowl on a stand with heavy scroll or paw feet are characteristic of the Regency period, whereas later 19th-century centrepieces were made in
a huge variety of designs – naturalistic, sculptural figures were particularly popular. Many Victorian centrepieces were supplied with a flat, mirrored stand known as a “plateau” to enhance the decorative effect, but very often these became separated from the centrepiece and were sold on their own.
In the 19th century there was also a great demand for presentation plate, and the most important firms, such as Hunt & Roskell (est. 1844), Garrards (est. 1802), and Elkington & Co. (est. c.1830) in England, and Odiot in France, employed sculptors to design magnificent silver or electroplate centrepieces for historic or sporting occasions. Such pieces were shown at the 1851 Great Exhibition in London. Centrepieces were also made in Germany and Austria, notably by the firm of Klinkosch, but these are not always of such good quality as English and French pieces because the metal is often thinner. By the second half of the 19th century centrepieces had been scaled down in size and elaborateness, with a single basket on a stand becoming the usual form. This developed into the dessert stand, which had replaced the centrepiece by the end of the century.
Regency and early Victorian baskets were produced in a wide variety of styles, but in many cases they can be distinguished from 18th-century examples by an unpierced body that is embossed and chased with heavy scrolls, flowers, and foliage, or radiating lobes. Silversmiths in the 19th century also reproduced the shell-shaped designs and elaborate patterns that were typical of the Rococo period.
Victorian baskets are generally less expensive and more readily available to collectors today than examples from the 18th and 19th centuries. The handles on these baskets are sometimes bent or damaged (or have been removed altogether), as the weight of the unpierced body puts strain on them. Any basket that does not have a handle should be carefully examined to see if the handle has been removed. As on earlier examples, the feet may also have been pushed up into the body of the basket if it has at some stage been overloaded.
SILVER BASKETS
Silver baskets designed for holding bread, fruit, cake, or sweetmeats are known from the early 17th century, but most of those surviving today date from (.1730 onward. They are oval or circular with pierced sides,
a flat base on a raised foot or four cast feet, and a fixed or swinging bail handle. In many cases, the flat base was engraved with a coat of arms. In the late 1730s and 1740s the leading English silversmiths Paul de Lamerie (1688-1751), Paul Crespin (1694-1770), and
James Schruder (active 1737–(.1752) produced intricate Rococo baskets with delicate pierced designs of scrolls, circles, crescents, and quatrefoils, elaborate engraving and chasing, and asymmetrical handles with cast and applied masks, animals, figures, and birds.
Another feature typical of the Rococo fashion for novelty was the imitation of inexpensive materials in silver; on baskets dating from the first half of the 18th century the sides are often pierced and chased to give the impression of wickerwork strips. Some extremely rare and expensive baskets by the best makers were made in the form of sculptural scallop shells with scroll handles.
By the late 18th century silversmiths used hand-piercing only for the finest baskets, as the majority of pierced parts were mass-produced quickly and
accurately using the newly developed fly-punch. The silver sheet was also much thinner than on earlier pieces, so baskets of this date should always be carefully checked to make sure that the piercing is intact. Simple wirework baskets embellished with chased and applied motifs such as flowers, vine leaves, and sheaves of wheat (for bread-baskets) were also popular in the late 18th century.
Epergnes
• COLLECTING individual baskets may be sold separately; check branches and feet for cracks or repairs
Marks
All detachable parts should be marked; crests or coats of arms on each piece should match
Centrepieces
• COLLECTING mirrored plateaux are now often sold on their own; inscriptions do not add value unless of particular historical interest
Marks
All detachable parts should be marked
Baskets
• DESIGNS solid forms with chased scrolls, flowers, and shells were typical in the early 19th century
• CONDITION piercing is particularly vulnerable to damage and should be checked carefully; ensure that the handle is not bent or damaged due to wear or overloading the basket; feet are prone to pushing LIP through the body on light, sheet-metal baskets
• COLLECTING early 18th-century baskets in heavy-gauge metal are more valuable than later, lighter ones
Marks
Both the handle and body should feature the same mark; marks arc sometimes pierced out.

Dining silver
Plates, salvers, tureens, and other items of dining silver first appeared in the late 17th century, when the complete dinner service, NN ith matching dishes and cutlery, was introduced at the French court. From that period, and especially in the 18th century, elaborate dining silver in the latest fashions was often used to display the wealth and status of the host, and finely engraved coats of arms or crests, identifying the owner, are common features of items such as salvers. For collectors today, heavy and elaborately decorated items including tureens and centrepieces are generally more rare and expensive than flatware, utilitarian drinking vessels such as tankards, and casters, cruets, mustard-pots, and salt-cellars, all available in a great variety of styles.
Plates and salvers
Dinner services, comprising individual plates and cutlery as well as serving dishes for specific courses and foods, were first introduced at the French court in the late 17th -century. Initially they were the preserve of royalty and the aristocracy, but the fashion for complete services spread in the early 18th century to the minor nobility and gentry, who often acquired different parts of the service over a period of time as their finances allowed. Silver plates, of various sizes, were generally made in sets of 12 (and are normally sold as such today). On both plates and salvers, the main decorative feature is usually the engraved coat of arms or crest of the owner, and sometimes the engraving is of very high quality.
PLATES
The earliest plates found on the market today tend to date from the early 18th century, when the first complete dinner services were made. These plates are seldom larger than 25cm (10in) in diameter and are starkly plain, except for a crest or coat of arms engraved on the broad, flat rim. Marks on these plates are generally found on the underside of the rim and should be clearly visible.
Missing or distorted marks usually indicate that the
plate has been altered; new borders may have been added and the rim reshaped to accommodate them.
More common than early 18th-century
plates are those dating from the 1740s
onward. During this time the fashion
for complete dinner services, unified by
matching ornament, reached its peak
and the custom of dining on a grand scale
necessitated services of up to 200 pieces. The standard service included six dozen meat plates, generally 25cm (10in) in
diameter (first-course and dessert plates were slightly smaller), and two dozen soup plates. Larger oval dishes for serving roasts were also made en suite.
Eighteenth- and nineteenth-century plates vary little in design except for the borders. During the 1730s the broad, plain, flat rim was replaced by a narrower, wavy rim (giving the plate a five-sided appearance) with gadrooning. With the development of the Rococo style in the 1740s, shell and gadrooned borders became most common; some of the finest plates have separately cast and applied borders, which should be marked. Simpler patterns of reed-and-tie or beading became fashionable in the 1770s and 1780s. The more elaborate gadroon, shell, and foliage border is characteristic of the Regency period. After about 1840 porcelain services were more popular than silver, and most silver plates made were replacements for or additions to earlier services.
17TH- TO EARLY 18TH-CENTURY SALVERS
Dating from the mid-17th century, the earliest salvers were of thin-gauge metal with a raised central foot, and were made as stands for porringers or candle cups. The finest examples were gilded and richly chased and embossed around the border with acanthus leaves, fruit, and flowers in the Dutch Baroque style. From (.1680 to (.1720 heavier-gauge metal was used, and the central foot, sometimes detachable, was often strengthened with applied cut-card work. In the 1720s the central foot was replaced by three or four small cast (usually bracket) feet, eet, especially on the rarer square, octagonal, or octafoi I -sh aped salvers popular during this period. Salvers before c.1740 often had moulded and applied rims of convex and concave curves.
LATER 18TH- AND 19TH-CENTURY SALVERS
Like plates, salvers from (.1740 onward are generally circular or five- or six-sided in shape, with only the borders and engraved armorials changing in style. On salvers, however, the armorials usually appear in
the centre rather than on the rim. The style of engraving should be contemporary with that of the border and correspond to the date of the marks. In the Baroque period, designs of arms and cartouches were relatively symmetrical, with strapwork and interlacing scrolls; the finest designs on English pieces were by Huguenot engravers such as the Gribelin fatuity.
In the mid-18th century, delicate, asymmetrical designs of flowers, shells, and scrolls reflected Rococo fashions. Salvers were particularly in demand for carrying tea and coffee services. Smaller versions, known as “waiters” (generally less than 20cm/8in in diameter),
ENGRAVING
Engraved designs were traditionally cut into the metal surface by hand with a sharp steel tool known as a “burin” or “graver”; today, most engraving is done
by machine. The technique was particularly popular for reproducing coats of arms, ciphers, and crests. Some of the finest engraving was done in early 18th-century England by such specialists as William Hogarth (1697-1764) and Simon Gribelin (1661-1733). The style of engraving can help to date a piece, but it is not always a reliable method as arms were often re-engraved with a change of ownership.
were also made, and sets of two or more salvers became common. The largest, measuring up to 38cm (15in would usually be engraved with a coat of arms; smaller ones (15-20cm/6-8in) had only a crest. Elaborate Rococo borders appeared, sometimes cast separately, featuring forward and reverse scrolls interspersed with shells, and feet took the form of scrolls or shells. The finest salvers were also flat-chased around the outer edge with designs of scrolls, shells, and foliage.
In the Neo-classical period more restrained borders of gadrooning, reeding, and beading, together with bright-cut engraving of ribbons, husks, and swags, were introduced. However, the taste for more ornate plate in the Regency period led to the appearance of large and heavy, often silver-gilt, salvers with paw feet and richly cast borders of shells, vine leaves, and gadrooning. Throughout the 19th century salvers in 18th-century styles were popular; some earlier salvers were also redecorated with chasing, but the 19th-century style is more elaborate and covers more of the flat surface than on 18th-century examples.