Posts Tagged ‘rectangular vintage coffee table’

EARLY 19TH CENTURY ITALIAN FURNITURE.

LIKE MANY OTHER European states,
the majority of the Italian states and kingdoms followed the lead of Paris. The greatest French-style furniture and interiors were created during the period of Napoleonic patronage, in the first decade of the 19th century. The French Emperor installed his brothers as rulers in Italy: Joseph became King of Naples and Lucian became Prince of Canino. Napoleon’s sisters also created significant interiors in the area: Elisa Baciocchi in Lucca and Florence, Pauline Borghese in Rome, and Caroline Murat in Naples. But it was not just aristocratic patrons who commissioned the cabinet-makers: one of the period’s characteristics was the emergence of middle-class buyers. This widening of the market coincided with the beginnings of mechanization and the gradual organization of the workshop – a trend that continued throughout the 19th century.
ITALIAN EMPIRE
In some ways, the French Empire style did not suit Italian furniture-makers. Its emphasis on large expanses of high-quality timber was a significant problem in an area where this was difficult to find. Also, its rectilinear forms and strict, sober lines seemed antithetical to a furniture tradition that favoured sculptural qualities. However,
symmetry and balance, with few curves and little ornament apart from Neoclassical gilt-bronze mounts, eventually dominated Italian furniture production. To overcome the problem of poor-quality timber, many pieces were painted – white, pale blue, and eau-de-nil were popular colours. Classical architectural forms were favoured, along with motifs from Imperial Rome, such as trophies of instruments or weapons, fasces (banded rods), laurel wreaths, and antique lamps.
FRENCH IMPORTS
The Grand Duchess of Tuscany (one of Napoleon’s sisters) actually brought French ebenistes to Florence to establish workshops and impart their skills and techniques to the Italians. Mounts were also imported from France. Consequently, it is almost impossible to differentiate between the French Empire furniture in the Palazzo Pitti in Florence and the Italian variants. The Empire style remained in fashion after 1815, sometimes combined with French Restauration styles, but the use of mahogany declined in favour of walnut or lighter-coloured timber.
During this period, Italy was made up of a patchwork of small states and kingdoms, dominated by Austro-Hungary in the north. Regional diversity was, therefore, far greater than in Britain or France, and much of the furniture produced echoes the traditions for which they are famous: Classical in Rome, Baroque in Florence, and Rococo in Venice. Lombardy produced some of the greatest innovators of the era, particularly Giocondo Albertolli, who trained at the Accademia di Brera and who published his influential Corso
elementare d’ornamenti architettonici in 1805.
The study of Umberto I This shows a room in the Palazzo Pitti in Florence. Under Elisa Baciocchi, Napoleon’s sister and Grand Duchess of Tuscany, several rooms in the palace were redecorated to reflect Paris fashions.
CARVED MIRROR
This carved and gilded mirror frame is decorated with masks of grotesques at the corners. The pediment is richly decorated with baskets -overflowing with flowers. c.1800.
MURANO MIRROR
This mirror has an applied crystal pediment and a frame with C- and S-scrolls at the corners. The oval mirror is surrounded by mirror sections engraved with leaves and divided with moulding. Early 19th century.
GILTWOOD SIDE CHAIR
two Neoclassical giltwood side chairs
part of a set of six Cardinal Fesch chairs; Fesch. a Corsican cardinal, became French ambassador to Rome in 1804. Each chair has a richly carved, domed back depicting a pair of
carved griffins above a stylized serpentine floral carving on a punched ground. The upright back supports are in the form of fluted pilasters with a frieze of running husks. The padded seats have fluted seat rails and are raised on gilded lion’s-paw legs. c.1810.
MAGGIOLINI
THE MOST FAMOUS NEOCTASSICAL FURNITURE-MAKER OF THE
LATE 18TH AND EARLY 19TH СENTURY, MAGGIOLINI’S NAME
IS ASSOCIATED WITH A PARTICULAR STYLE OF MARQUETRY.
Giuseppe Maggiolini (1738-1814) made furniture that was austere, boxy, and unpretentious in form, with no carving and few mounts. However, its characteristic pictorial marquetry lent his work a brilliant opulence. Maggiolini used many different types and colours of timber to create his marquetry pictures, shunning Stains, artificial colouring, and other tricks to achieve decorative effects. In the tradition of Piranesi and, more recently, the ornamental designer and interior decorator, Giocondo Albertolli, he produced marquetry trophies, still lifes, Chinoiserie and caprici. As a result, his name is used to refer to all work of this type, whether produced in his workshop or not.
Maggiolini started his career as a carpenter in a Cistercian monastery, where he established his first workshop in 1771. He later founded a second workshop in Milan, which was inherited by his son, Carlo Francesco, and Cherubino Mezzanzanica. He crafted some of his most brilliant furniture for the Archduke
Ferdinand of Austria, who was the Governor General of Lombardy, and the King of Poland was also one of his clients.
In keeping with the tastes of his age, Maggiolini’s furniture is simple in design and follows late 18th-century French prototypes. Its defining difference is the intricate marquetry, in Italy this had a long tradition stretching back to Renaissance intarsia works.
Louis XVI commode This rectilinear, marble-topped piece, from the studio of Guiseppe Maggiolini in Milan, is made from rosewood and several exotic woods with inlays of Classical figures in medallions and interlacing festoons. The commode has three drawers with bronze mounts and is supported on square, tapering legs. c.1800.
The frieze drawer is inlaid with a row of interlaced festoons.
The top is not made of marble, unlike French commodes.
The two case drawers are inlaid sans traverse with a symmetrical diagonal pattern centred by a medallion containing Classical figures.
The complicated marquetry patterns are typical of Maggiolim’s work.
ARMCHAIR AUX TETES DE LION
This mahogany armchair has a gently curved top rail, an X-frame back, and armrests terminating in carved and gilded lions’ heads. The X-frame base has gilded paw feet. c.1810
Stop-fluted corner
GILTWOOD AND VERDE ANTICO SIDE TABLE
This rectangular table has a verde antico (old green) veneered marble top above a frieze inset with matching marble panels and fluted corners. The square, tapering legs are also inset with marble panels and are surmounted by carved caryatids, whose hands support the table top. c.1800.
The massive table top is veneered with marble.
The frieze is inset
with marble panels
that match the
table top.
The table legs are inset with marble panels
Caryatids support the table top.

Candelabra – table candlesticks with branches for extra lights – began to be made from c.1660 and increased in popularity, throughout the 18th and 19th centuries. A candelabrum consists of a central shaft with two or more detachable scroll branches supporting candle sockets; sometimes there is also a socket at the top of the shaft. Made in similar styles to candlesticks and by the scone makers, candelabra were likewise generally produced in pairs. Most found today, are in good condition, because they were better made and much more expensive than candlesticks and therefore were not subjected to the same amount of wear or damage.
THE EARLY 18TH CENTURY Silver Candelabra
Although examples are known from the late 17th century, few candelabra dating from before the 1770, survive today. Until the late 18th century most had two branches, but matching branches and stems were not particularly popular or fashionable until c.1750. As on candlesticks, detachable nozzles for the sockets appeared c.1740. To be of value to collectors, a candelabrum should have all its separate parts – the branches, the nozzle, and the stem – in the same style and hearing the same maker’s marks. Before -.1750 branches were often considered awkward and so were discarded and the stem used as a candlestick.
French silversmiths createdd some of the finest Rococo candelabra in the early and mid-18th century. One of the most famous examples is a single three-hranched candelabrum designed in 1734-5 by juste-Aarele Meissonnier (1695-1750), Royal Goldsmith to King Louis XV of France, and executed by Claude DLIVivicr (1688-1747) for the English Duke of Kingston. It has an extraordinary, asymmetrical, spiralling stem with three richly sculpted branches ending in flower-shaped sockets, and a cast finial in the form of a cluster of leaves, which can be removedto hold a fourth candle. Such pieces fully exploit the plastic, sculptural qualities of cast sib, er, and had a particular influence in England, where elaborate Rococo candelabra were made by such leading silversmiths as George Wickes ( 1698-11-61) and Paul de Lamerie (1688-1751) in the 1740s and 1750x. All such pieces are exceptionally rare and valuable today and fetch high prices on the market.
THE LATER 18TH CENTURY Silver Candelabra
In the early 18th century the hour for dining was generally about 3p.m., but lit the latter part of the century it was put back and the main meal of the day was often eaten after dark. For this reason, more light was needed, and so candelabra from the 1770s onward usually have at least three branches. Elegant and light Neo-classical forms, with fluted or plain tapering baluster stems, simple, slender branches, and urn-shaped sockets, all decorated with beading and reeding, were especially popular. Such designs were produced in cast and loaded sheet silver and Sheffield plate; some candelabra have silver stems but Sheffield plate branches, perhaps to reduce the cost. Similarly, candelabra made entirely in Sheffield plate often had a matching set of more expensive silver candlesticks.
THE EARLY 19TH CENTURY Silver Candelabra
Massive, heavy silver-gilt candelabra are characteristic of the Regency period. Made largely to impress, these often form part of elaborate table centrepieces. Magnificent candelabra were made by the leading English goldsmiths Rundell, Bridge & Rundell (est. 1805) and by Paul Story (1771-1844) for the Prince of NXiale, (later King George IV) and his circle. Such pieces – such as one made by Edward Farrell in I824 – have five or more branches, sometimes with double sockets, and stems lit the form of caryatids or mythological figures. Earlier candelabra were often altered to suit new tastes: a pair of candlesticks ordered by the Earl of Carlisle from the firm Parker & Wakelin (est. -.1758) in 1770 was supplemented with double branches in 1780 and triple branches in 1826.
THE LATER 19TH CENTURY Silver Candelabra
Most candelabra made in the later 19th century are of loaded sheet silver or plate, and many have figures supporting the candle sockets or as decoration on the base. After the introduction of oil lighting, some candelabra were converted to oil lamps. in the second half of the 19th century a huge range of items, including candelabra, was produced using the new method of electroplating. Following the invention of the electric battery in the early 19th century, an English doctor named John Wright experimented with electrolysis to coat the surface of base-metal objects with precious metal. In 1840 the Birmingham firm of Elkington & Co. (est. c.1830), in partnership with Wright, took out the first patent for this new process. Known as “electroplating”, it involved the immersion into a plating bath of a nickel object attached to a positive anode and a block of pure silver attached to a negative anode. When the electric current was switched on, silver particles passed through the solution and were deposited on the nickel object; the same process could be used both for gilding and for replacing worn objects.
The introduction of electroplating led quickly to the decline of the Sheffield-plate industry. The new process was far safer than the old one, but its main advantage was that it enabled objects to be formed entirely by traditional silversmithing methods before being plated, making complex sculptural ornament possible. By comparison,handles and borders made in Sheffield plate had to be silver. Condition Is important stamped out from sheet silver, filled with lead, and applied.
Elkington & Co. and the marm, other electroplate manufacturers established in the 1850s and 1860s produced a huge range of electroplated items, from chargers, ewers, and centrepieces richly decorated with valuable ornament in various historical styles to cutlery, frames, and spoon-warmers. Elkington employed the French sculptor Leonard Morel-l.aclertil ( 1820— ) to design splendid Renaissance-style pieces for display at international exhibitions. The firm also used the process of electrotyping - taking a mould front an object and depositing onto it a thin layer of silver, backed with base metal - to produce facsimile copies of a number of historically important pieces of silverware, in particular a collection of Tudor and Jacobean silver held in the Kremlin Armoury in Moscow.
Since such large quantities of electroplate still exist, it is important to buy pieces in the very best condition. Electroplate can usually be distinguished from Sheffield plate by the harsher colour of the pure silver (the sterling standard was used in Sheffield plate) and the lack of visible series, and joins, which are hidden by the layer of deposited silver.