Posts Tagged ‘rosettes’

Dishes
Pair of George III oval meat dishes by Frederick Kandler, London, 1765, 73 oz 2 dwt Pair of Victorian octagonal entree dishes and covers with
vegetable dividers for each and ball finials, Sheffield, 1880,
120 oz 14 dwt 450 0
George III circular vegetable dish with ivory grips, pierced sides and four scroll and foliate feet, by W.S., London, 1809, 80 oz 2 dwt 360 0
William IV shaped oblong entree dish and cover with engraved armorials and foliate ring handle, by J. C. Eddington, London, 1835, 61 oz 5 dwt 260 0
George III muffin dish and cover, the domed cover with urn
shaped finial, by Henry Chawner, London, 1791, 15 oz 1 dwt        210 0
Jugs—Cream and Milk
George III helmet-shaped cream jug with ‘bright-cut’ engraving, loop handle and square pedestal foot, by George Smith, London, 1790, 3 oz 7 dwt 80 0
George II cream jug of conch shell type with serpent handle and
three coral-like supports. Circa 1755, 3 oz 5 dwt 80 0
George III oblong milk jug engraved with crests and with gadroon lip and scroll handle, by R. and S. Hennell, London, 1808, 6 oz 2 dwt 70 0
Victorian baluster milk jug chased with flowers and scrolls and on three feet. Possibly by William Brawn, London, 1845, 5 oz 7 dwt 52 0
Jugs—Water
George III pear-shaped hot-water jug, stand and lamp, the jug with rams’ masks and laurel festoons, the stand on three claw feet with female bust terminals, by Andrew Fogelberg. The jug 1776, the stand 1775, 40 oz

780 0
George III vase-shaped hot-water jug, plain with wood handle and on circular foot, by William Fountain, London, 1801, 25 oz 11 dwt 460 0
George II baluster hot-water jug chased with scrolls, leaves and flowers, raffia-covered handle and rim foot, by Gurney and Cook, London, 1755, 19 oz 15 dwt 270 0
Jugs—Wine and Ale
Queen Anne ale jug, die ground embossed with foliage and flowers and a satyr spout, by John Wisdom, London, 1712, 35 oz 280 0
Victorian wine ewer with baluster body and engraved with Grecian figures and leaves, entwined snake handle and butterfly finial, by E. and J. Barnard, London, 1862, 27 oz 11 dwt        170 0
Marrow Scoops
Queen Anne scoop of typical form by Charles Jackson, 1713,
1 oz 10 dwt 68 0
Early George III scoop, the larger bowl engraved with initials,
probably by William Tuite, London, 1767, 1 oz 12 dwt 20 0
Mustard Pots
George III drum mustard with moulded borders, flat hinged lid and simple scroll handle, with spoon of earlier date. Pot by Ernes and Barnard, London, 1813, 5 oz 10 dwt 165 0
some auction room prices : 1968-69
William IV mustard with ribbed baluster body and hinged domed lid with floral finial, scroll handle and shell thumbpiece and spoon of same date but different maker. Pot by C.G., London, 1830, 6 oz 17 dwt
George III oblong mustard with domed cover, urn finial and angular handle on four bun feet, London, 1813, 3 oz 11 dwt
Salts
Four George I plain oval trencher salts with incurved sides, by
Mary Rood, 1723, 6 oz 15 dwt Pair of George III boat-shaped salts, reeded at the lips and
pedestal feet, gilt interiors, by Peter and Ann Bateman, 1792,
4 oz 6 dwt
Pair of George II compressed circular salts, with plain engraved bodies below gadroon lips each on three shell-headed hoof supports, possibly by Isaac Cookson, Newcastle, 1747, 8 oz 1 dwt
Salvers
George II large circular salver on four lions’ mask and shell bracket feet, the shaped border pierced and chased, by George Wickes, 1744, 137 oz
George I plain circular salver on central foot with moulded border, by W.P., 1720, 13 oz 12 dwt
George III circular salver, engraved with initials, chased wave border and gadroon rim, on three claw and ball feet, by Robert Rcw or Rugg, 1766, 24 oz 3 dwt
Victorian salver engraved in the centre with an initial and also with scrolls and foliage, moulded border, by J. and J. Angell, London, 1845, 25 oz 14 dwt
Sauceboats
Pair of George II plain sauceboats each on three shell and scroll feet with gadrooned rims and double scroll handles, by Peter Archambo and Peter Meure, 1754, 29 oz
George II two-handled plain double-lipped sauceboat on collet foot, with double scroll handles and waved rim, with a moulded drop beneath the spout, by Peter Archambo, 1732, 17 oz 5 dwt
Pair of George III sauceboats, each on fluted shaped lozenge foot, with gadrooned borders and double scroll handles, by William Sampcl, 1766, 25 oz
Snuff Boxes—See Small Decorative Antiques Sugar Basins—See Baskets—Sugar Tapersticks—See Candlesticks Tankards
William and Mary tankard on three lion couchant feet, scroll handle, cylindrical body and moulded base, by Robert Cooper, 1692, 31 oz
George II baluster tankard with domed cover, openwork thumb-piece and double-scroll handle, on moulded spreading foot, by William Grundy, 1755, 34 oz 5 dwt 650 0
George III baluster tankard, with domed moulded cover and heart-shaped lower terminal to the scrolling handle, by William Caldecott or Gripps, 1765, 27 oz 15 dwt 570 0
Tea Caddies
George III oval caddy, the body with two bands of bright-cut engraving in beaded borders and the plain hinged lid with urn finial, by Hester Bateman, 1781, 14 oz 10 dwt 900 0
George III shaped oval caddy, the body fluted at intervals, decorated with bright-cut engraving, hinged domed cover with wood finial, by Robert Hennell, 1787, 14 oz 17 dwt 480 0
Teapots and Stands
George II bullet teapot with engraved shoulder decoration of satyr masks, leaves and flowers, straight spout, loose lid, ivory handle and finial, by Isaac Liger, 1729, 15 oz 1 dwt 2,100 0
George III teapot stand on four fluted panel supports, by Hester
Bateman, 1789, 4 oz 15 dwt 280 0
George III oval teapot with moulded girdles and a matching stand, supported on four feet, by Crespin Fuller, London, 1800, 16 oz 15 dwt 270 0
George III oval, semi-lobed teapot, with swan-neck spout, ivory handle and finial, by P. A. and W. Bateman, 1799, 17 oz 3 dwt 170 0
George IV teapot, compressed circular body, ivory handle and
finial, curved spout, by Eley and Fearn, 1823, 25 oz 16 dwt        150 0
William IV compressed circular teapot with moulded girdle, wood finial and similar wood handle, by E. E. J. and W. Barnard, 1830, 14 oz 2 dwt 135 0
Early Victorian bullet-shaped teapot with engraved body, Edinburgh, 1840, 24 oz 82 0
George III oval teapot stand, gadroon border on four panel
supports, but George Fenwick, Edinburgh, 1806, 5 oz 14 dwt 80 0
William IV small melon-shaped teapot, with slightly domed cover and ivory finial, scroll handle and curved spout, London, 1833, 13 oz 18 dwt 60 0
Tea and Coffee Services
Victorian tea and coffee service of compressed circular form, decorated with embossed flowers and foliate handles and on scrolled feet with shell motifs, by Rawlins and Sumner, London, 1838, 72 oz 600 0
George IV three-piece melon-shaped tea service with scroll handles and shell decorated panel supports, by E. E. J. and W. Barnard, London, 1829, 44 oz 7 dwt 500 0
George III circular three-piece tea service with curved lobes, gadroon rims and leaf decorated handles, on paw supports, the pot with rose finial, by John Angell, 1819, 41 oz 6 dwt 380 0
Victorian three-piece tea service of compressed circular form,
the plain ground richly chased, by I. J. Keith, London, 1840, 48 oz
Vinaigrettes—See Small Decorative Antiques Waiters
Pair of George III plain oval waiters each on four shell and beaded bracket feet, beaded rims, by John Scofield, London, 1777, 27 oz
George II plain shaped square waiter on four hoof feet, moulded border, by Thomas Farren, London, 1734, 6 oz 17 dwt
Early George II square waiter with raised border incurved at the angles, 1727, 3 oz 18 dwt
SHEFFIELD PLATE Candelabra and Candlesticks
Pair of candelabra, each for three lights, with reeded scrolling arms, gadroon bordered knops, detachable nozzles and circular bases, 17i in high to centres
Pair of three-light candelabra, the tapering vase stems, circular bases and campana-shaped sconces decorated with chased borders, each fitted with two detachable scrolling branches, one converting to form a

five-light and bearing flame finial, 20 in high
Pair of table candlesticks with V-shaped stems, gadroon shoulders, circular bases and detachable nozzles, llj in high
Pair of table candlesticks with circular bases, vase-shaped stems and gadroon borders, detachable nozzles, 11 in high
Coffee Pots
Vase-shaped coffee pot on pedestal foot with reeded borders, ball finial and wood handle, 13 in high
An oval coffee pot on pedestal base, with reeded shoulder, gadroon borders and angular wood handle, 9] in high
Urn-shaped coffee pot, body semi-lobed between ribbed panels, on pedestal base, ball finial and wood handle, 27 in high
Coasters—Wine
Four circular wine coasters with lobed sides below gadroon lips, the wood bases centred by crested bosses, 5J in diameter
Pair of circular coasters with beaded and ovolo rims, wood bases, 6 in diameter
Caddies—Tea
Two caddies of bombd form embossed with shell motifs Serpentined caddy with hinged lid and beaded borders
Dishes
Set of four entree dishes and covers on heater bases, oblong with scrolling foliate borders, 14 in wide over handles
Pair of entree dishes and covers with gadroon borders and
detachable foliate handles, 11 in wide 22 0
A rectangular entree dish and cover complete with liner, gadroon and leaf borders, wood end handles, on four supports, 141 in wide 20 0
Teapots
An oblong teapot, body semi-Iobed between gadrooned borders, short spout, ivory finial and angular wooden handles, 5J in high 25 0
A compressed circular teapot engraved with swirling leafage,
fruit finial and scroll handle, 5J in high 18 0
Tea and Coffee Services
Oval three-piece coffee service with vase-shaped pot, oval jug and basin decorated with bands of sprays and foliage, 10 in high the pot 160 0
Three-piece tea set with compressed circular bodies, fluted,
foliate collars, scroll handles and foliate panel supports 38 0
Tea Trays
Oblong two-handled tray, engraved with armorials within a chased surround of scrolls and floral sprays, gadroon border, 30 in wide 220 0
An oblong tray, gadroon bordered and reeded end handles
springing from chased foliage, 28 in wide 95 0
Tea Urns
An inverted compressed pear-shaped urn, the body engraved
with a crest, foliate handles and flower finial, 16 in high 75 0
An oviform urn with an applied plain shield, the cover with vase finial, reeded loop handles, on square base with ball feet, 221 in high 45 0
Tureens
Large shaped oval sauce tureen on four feet below heavily
chased floral motifs, detachable liner, 16J in wide 230 0
Pair of oval sauce tureens and domed covers with gadrooned rims, decorated with acorns and oak leaves at the handles, 8Ј in wide (end handles missing from one tureen) 120 0
Wine Coolers
Set of four coolers, the campana-shaped bodies engraved with contemporary armorials above lobing reeded handles and gadroon borders, on pedestal bases, 9i in high 520 0
Pair of coolers with campana-shaped bodies, reeded handles and
on pedestal bases, 9J in high 200 0
NON-PRECIOUS METALS
Brass
Pair of eighteenth-century andirons, with spherical finials, and
masks, 29 in high 100 0
SOME AUCTION ROOM PRICES ! 1968-69
A club fender
A Corinthian column floor standard
An embossed fire kerb
A two-handled log tub on paw feet
An alms dish with lobed centre and inscription border, the rim
with punched rosettes, 15} in diameter Pair of spirally-turned candlesticks on domed feet, 20J in high A hanging oil lamp Pair of chambersticks, with snuffers A heavy log tub with lion mask handles on paw feet Brass

and steel semi-circular fender
An oval fire insurance plate with a crest of a stag, dated 1774 Pair of carriage lamps A helmet coal-scuttle
A warming-pan with turned wood handle Pair of baluster candlesticks, 9 in high
Bronze
Figure of a racehorse and jockey after Isadore Bonhcur, I0j in
high
The Capture of Alexander by G. Halse. Two warriors hold a
struggling youth. Signed and dated 1860, 24 in high Eighteenth-century Italian figure The Dying Gladiator signed
Canova
Figure of a dancing fawn, holding up a bunch of grapes and
balanced on his left foot, 14 in high Figure of an infant satyr playing a set of pipes, 9j in high Pair of busts of Henry IV and Sully, three-quarter length, both
wearing ruffs and decorations, on rouge marble socles, 20} in
high
Pair of Art Nouveau winged figures stamped A. Moreau, 9J in
high
Pair of five-light candelabra on bulbous stems Italian figure of Venus, 7 in high
Copper
Early nineteenth-century tea urn on a square base
A street lamp
Three large saucepans (one with lid) Two coal scuttles A large kettle
Coal helmet with swing handle
Large two-handled urn and cover
A copper and brass tea urn with tap
A long turned wooden-handled warming-pan
Iron and Steel
Steel and brass basket grate with pierced frieze and baluster
uprights, 20 in wide Seventeenth-century Sussex wrought-iron fireback, 2 ft 10 in
by 1 ft 8 in and a log fork Wrought-iron shaped fire-back Regency iron and brass stick stand on paw feet
Victorian cast-iron corner stick stand 5 10
Victorian cast-iron oil heater 3 10
Pewter
A charger with secondary touch of Thomas Lanyon, circa 1730,
20 in diameter 36 0
Five quart tankards 35 0
A four-branch candelabrum, 24 in high 22 0
Eighteenth-century circular charger, 20 in diameter 22 0 Pair of altar candlesticks, baluster-shaped stems on triangular
bases, 20 in high 16 0
Pair of baluster and cup candlesticks, 18 in high 15 0
A hot-water meat dish with two handles and a grill, 22 in wide 15 0
A travelling chamber-pot, stamped Jas. Dixon 14 0
Two tankards and a mug 6 0

Egypt
In Ancient Egypt jewels were an important part of costume; they were worn by men and children as well as by women, and were often used to adorn statues of gods and goddesses. Images of sacred animals such as cats and crocodiles are often given necklaces, bracelets and earrings made of gold. Earrings, introduced from Asia, seem to have appeared later than other types of jewellery and the earliest important example dates from the end of the second intermediary period (circa 1600 BC). This is a pair consisting of several hoops soldered together which would have hung from large holes pierced in the earlobes. Another early type is a simple hoop of gold, glass paste, faience, jasper or other semiprecious stone worn by pulling the earlobe through the open end, something that was possibly done in infancy.
X-ray photographs of mummies in the Cairo Museum show earlobes extremely elongated and deformed by the use of very heavy ear ornaments in childhood. One mummy in the museum of Turin has two earrings worn on the same earlobe. The mummy of Tutankhamen has large holes pierced in the earlobes, proving that earrings were worn by men as well as women.
During the New Kingdom (1559-1085 BC) large earplugs came into fashion and these also caused deformation of the earlobes. They are designed as faience discs and have a groove round the edge which enabled them to fit into an enlarged hole stretched in the earlobes. Other ear ornaments of contemporary date were in the form of mushroom-shaped studs with the stem pushed through such a hole. In both cases these ornaments were worn in the plane of the ear rather than at right angles to it.
By the end of the XVIIIth Dynasty the decoration of earrings was very varied: cascades of drops, flowers and bell-shaped motifs for pendent earrings and rosettes and flowerhead motifs for the large discs.
The Greek World
Around 800 BC contacts between Greece and the East became closer and two centuries of Oriental influence in Greek art followed. Cyprus and Syria — taken in the broad sense to include Phoenicia and the Neo-Hittite North Syria — were the two countries that mainly influenced Greece, the latter acting as a channel for Egyptian and Mesopotamian influence.
The relative abundance of gold artefacts of this period is undoubtedly related to the opening up of the East to the Greek world through colonization, giving access to rich sources of precious metal in Asia Minor, especially to the Lydian gold mines. The preponderance of the ateliers of Eastern Greece throughout the period is evidence of this. Embossing, filigree and granulation grew in popularity and inlaying with stones, amber and glass made its appearance. Gold earrings of flat crescent design, often decorated with granulation and inlays, and suspended with fine chains are well represented, as well as earrings designed as spirals to be thrust through a hole in the lobe. They were either simple gold wire spirals or had a variety of finials decorated with beading and granulation, worn with the ends pointing upwards. Many variations of this type are known, some with more, some with fewer turns of thin and thick gold wire, others splayed out in the form of a letter W with a higher central point. In the late 7th century the W-shaped spiral was sometimes decorated with elaborate finials in the shape of griffins’ heads, pomegranates or rams heads of Oriental inspiration.
The crescent or boat-shaped earring of Eastern tradition, seen in Ur in the middle of the 3rd millennium BC, finally reached Greece via Syria and Cyprus about 700 BC and the type was to flourish there and in the Hellenized centres of the Eastern Mediterranean for some four centuries. Greek examples of the 7th century BC are characterized by a rather fat boat-shaped motif, sometimes decorated with granulation, on a thin gold wire going through the pierced earlobe. The hoop with beaded pendant of Cypriot tradition became popular in the 7th and 6th centuries Bc but remained confined to Eastern Greece.
Greek jewellery of the 6th and early 5th centuries is of artistic brilliance but very little has survived. It is, however, amply documented in vase painting and sculpture. Three of the few regions relatively rich in archaic gold jewellery are Sicily, Rhodes and Cyprus, where crescent earrings of the traditional form continued to be produced.
It was not until after the Persian wars that gold became more plentiful in Greece. By the accidents of history, this Greek Classical jewellery is better known from examples found in Southern Russia, Cyprus and Southern Italy than from Greece proper. The forms were extremely varied and among the abundance of diadems, necklaces, bracelets, pendants and finger-rings, earrings were very popular. They came in three main forms: the boat or crescent, the spiral or helix, and the disc with cone or inverted pyramid pendant.
As in the Archaic period, vase painting and sculpture would seem to suggest that earrings were the most popular form of ornament; statues of female figures were frequently adorned with them, sometimes sculpted in marble and sometimes made of precious metal, as can be inferred from the holes pierced in the ears. It is possible that the ornaments created to adorn statues or donated to temples to be worn by images of goddesses in religious processions were more elaborate, rich and complex than those used in ordinary life, which were buried with the dead and have now been recovered from graves. That they were part of ordinary dress is proved by representation on coins, vase paintings and terracotta figures.
As already mentioned, most of these surviving examples came from areas outside mainland Greece, such as Etruria and Southern Italy.
The boat-shaped earring, which, as we have seen, dates back at least to 13th-century Cyprus, was the most popular form of ear ornament in the Classical period. In its simplest form it consisted of a crescent terminating in a wire for insertion into the earlobe, and remained in fashion, virtually without a break, throughout antiquity. In the 5th and 4th centuries BC it was widespread throughout Southern Russia, Thracia, Macedonia and also Sicily where it was depicted on Syracusae coins of 474-450 Bc adorning the head of Artemis-Arethusa.
P 25 The earliest examples from the Classical period are very simple, consisting of a boat-shaped motif decorated with beading, filigree and granulation. Later, in the second half of the 4th century BC, they tend to be more elaborate in design, often with suspended pendants and chains of various types. Among the most complex examples of the boat-shaped earring is one from Tarentum where the boat is completely encrusted with filigree, granulation, leaf and palmetto motifs and is merely a vehicle
P. 27 for the exuberant decoration of rosettes, nikai, doves, chains and pendants. This decorative repertoire of palmettos, rosettes, flowerheads and spirals can also be found, enlarged, on contemporary vase painting and funerary monuments. The Tarentum example perfectly illustrates the general trend of the period towards increasing elaboration of decoration which is common to the whole Hellenic world. The heavy use of filigree floral motifs and stylized palmettos to enliven the flat surface of the basic boat-shape and the curved surface of the rosette petals are deliberately intended to create a complex chiaroscuro effect with light, shade and reflection and give drama and depth to the object; in later periods this effect was often achieved chromatically by the combination of various different gemstones and by the use of multicoloured enamels.
It is interesting to note that even at this stage the craftsmen of Tarentum were also catering for a less prosperous clientele, making gilt terracotta imitations of the type described above, probably cast in moulds taken from the more expensive gold examples — although it is possible that these cheaper, rather fragile ornaments were made specifically as grave goods.
Another very popular form of earring of the second half of the 5th century BC was that in the form of a disc supporting either one or three pendants, the central one invariably being a female head, an inverted pyramid, an amphora or a cone and the two flanking ones articulated chains with links of various types. By the Hellenistic period disc-and-pendant earrings were to become the most popular and widespread form of ear ornament.
Among the earliest examples is a superb pair from Tarentum, each with a disc decorated at the centre with a filigree rosette within a border of corded wire and beaded work and a female head suspended from a central pendant flanked by two chains of conical beads with bell-shaped terminals. The female head pendants are chased in great detail, with the hairstyle typical of the time as seen on terracottas, vase paintings and coins: parted at the centre, divided in two bandeaux and gathered in a large bun worn low on the nape of the neck. The hair being brushed away from the ears leaves ample space for a large pair of earrings consisting of a pyramidal cluster of beads suspended from a rosette. The great popularitiy of earrings throughout antiquity is certainly linked to the fashion for women to wear the hair gathered at the top or the back of the head, or at least brushed away from the temples.
The head-shaped pendants show an interesting feature: at the base there is a small hole into which it is likely that a piece of sponge or cloth soaked in perfumed oil was inserted. Putting perfumed sponges in necklace pendants was common in antiquity, and Etruscan earrings with perfume compartments have been found. Though not common, such earrings with female head pendants have been recovered in Southern Russia, Cyprus and Etruria.
Another highly significant detail on this example is the presence on the disc and chains of small traces of delicately coloured enamel. The introduction of polychrome enamels in jewellery was an important innovation that dramatically transformed the work of Greek goldsmiths, who had until then achieved effects of movement and contrast through the use of filigree and granulation. It is unfortunate that in this and many other examples the major part of the enamel has now worn away, since polychrome enamels defined the different elements of the decoration, and were therefore essential to the overall effect of the piece.
Rather more widely dispersed were disc earrings with an inverted pyramid pendant often between two chains. This type of pendant, already seen in the Archaic and early Classical periods, became very fashionable towards the end of the 5th century, reaching the height of its popularity in the 4th century BC, and continued to be one of the favourite forms of ear ornament of the Hellenistic period: many examples have been found in Cyprus, Southern Russia, Macedonia and Apulia. The type is also represented on coins from Elis, Locri, Metapontum and Tarentum, on the tetra-drachm of Eukleidas from Syracuse, and on 4th-century BC terracotta antefixes from Tarentum, Metapontum and Heraclea.
The earliest examples are characterized by extremely elaborate gold leaf applications, filigree and granulation on both disc and pyramidal pendant. Later examples are simpler and often completely undecorated apart from a gemstone, usually a garnet, set at the centre of the disc. Gemstones, which made their first appearance in jewellery towards the end of the 4th century BC, became more and more prominent from now until Roman times.
Contemporary with the earring types described above and just as important were
disc earrings with a vase or a cone pendant. They enjoyed a long period of popularity,
P. 26 peaking between the 2nd and i st century BC. Tarentum, Cyprus and Southern Russia
offer the best examples, often set with garnets, coloured glass beads and pearls. This
type is well documented on Syracusae and African coins of the ,3rd and 2nd century
BC.
P. 28, 29 Hellenistic art is cosmopolitan in character, the same forms being found all over the Eastern Mediterranean. Jewellery was no exception-, examples from Apulia are hardly distinguishable from those from Thessaly, Macedonia, Asia Minor, Thrace or Southern Russia.
Particularly popular in the 2nd century BC were disc earrings with bird pendants
made of glass paste. Sirens, peacocks and other winged creatures naturalistically P. 31 modelled in this way were widely popular. The dove was a special favourite because
of its assocation with Aphrodite.
Another variation on the same theme is where the pendant assumes the shape of a miniature Eros. Eros, tutelary god of death and love with his double symbolism, erotic and funerary, is a very common motif in Hellenistic jewellery from the late 4th to the late 2nd century Bc and is represented in various ways. Almost as popular was Nike or Victory, a feminine version of Eros. With time, emphasis on the human figure became so pronounced that the disc disappeared, leaving Eros or Nike simply suspended from the earlobe by means of a hook of gold wire.
Another very popular type of ear ornament from the Classical period is the helix earring, comprising a tubular piece of thin gold leaf twisted into a spiral with various decorative motifs as terminals. This had already existed in the Archaic period and was very well known to the Oriental Greek world as early as the 7th century BC. Many examples have been found in Cyprus, Rhodes, Thrace, Macedonia and Southern Russia, all related to the same prototype, probably of Cypriot origin, descended from the Mycenean spirals of Enkomi. Towards the mid-4th century BC, another form of earring appeared, consisting of an open circle with a small pointed finial on one side and a larger terminal in the shape of a human or animal head on the other. There are similar examples with human or animal heads on both terminals, one larger than the other. These remained popular throughout the Hellenized world until the beginning of the i st century BC. The favourite motif for the terminal was the lion head, but antelopes’, rams’, dogs’ and bulls’ heads are also known, their eyes set with gemstones or coloured glass pastes.
Both helix and animals’ head earrings raise the question of how they were worn. By modern standards they seem too large to be pushed through a hole in the earlobe, but no alternative fitting has ever been found. We must assume, therefore, that in the past women submitted themselves to far greater tortures than we are prepared to suffer today for the sake of fashion.
The conquests of Alexander the Great between 333 and 322 BC transformed the Greek world. Vast territories came within the Greek sphere of influence, while at the same time Greece itself was exposed to influences from Egypt and Asia. The Hellenistic age, as culturally and artistically defined, lasted from about 322 BC until the inauguration of the Roman Empire in 27 BC. Much jewellery has survived from this period. Gold became more widely available through intensive mining in Thrace and the dispersal of captured Persian treasures.
Earrings were designed as simple gold hoops either decorated at the front with a
single motif, such as a bird, a dolphin, a bunch of grapes, or a negro’s head, or hav-
ing a pendant in the form of such a motif. Much use was made of glass paste and gemstones to pick out details and create contrasts of colour, and a new technique known as `dipped enamel’ was introduced to give a multicoloured effect, especially to earring pendants in the shape of birds or other creatures.
Together with these types, which are very typical of their period, many other earrings of older design continued to be produced and amongst these the disc-andpendant model was perhaps the favourite.
Etruscan
The earliest remains of the Etruscans of central Italy are dated about 700 BC, continuing in a recognizable form until about the i st century BC. Their great wealth, attributable largely to the mineral resources of the country, is reflected in the sumptuousness of their tombs. In female graves, vessels of precious metal and silver and gold jewellery such as fibulae, pectorals, bracelets and elaborate earrings reflect not only the important role women had in that society, but also jewellery’s function of `hoard’ and ‘reserve fund’. Although in its earliest manifestations Etruscan art was remarkably free of Greek influences, it did not long remain so, and by the end of the 7th century Be Greek artistic influence was becoming increasingly significant. Etruscan art, however, never lost its identity completely.
The earliest Etruscan earrings, of about 625 BC, in the shape of crescents and hoops, are not dissimilar to those found elsewhere in the Greek world at the same time. The first truly Etruscan form of earring made its appearance just before the
p. 28, 29 mid-6th century. The type is known as a baule, Italian for a bag or a travelling case, and it is perhaps the best known form of Etruscan ornament. Its popularity lasted just over a century. It consists of a strip of gold leaf bent round to form a cylinder, the two ends connected by a gold wire also acting as a suspension hoop. The ends of the cylinder were sometimes closed by a circular gold plate. The decoration, consisting of gold leaf application in the form of stylized flowers and rosettes, embossed leaves or geometrical motifs, filigree and granulation occasionally embellished with polychrome enamels, shows a certain ‘horror vacui’, pressing as many decorative details as possible onto the small gold surface.
Another type of earring of typical Etruscan design, which first appeared in the second half of the 6th century, is the disc richly decorated with concentric bands of
P. 3 I floral and geometrical motifs embossed or made of filigree and granulation, often inlayed with gemstones, amber or glass paste. Earstuds would perhaps be a more appropriate name for this type of ornament, with a hollow tube at the back ending in a loop to be pushed through the earlobe and a safety chain attached to the side of the disc for fixing the loop. The origin of these large ear-ornaments, which in some cases measure as much as 7cms in diameter, is probably Lydia.
In the 5th century BC the most fashionable and widespread form of ornament in the
P 30 Etruscan world was a type of earring consisting of a tubular hoop decorated at one end with the head of a woman, a river-god, a ram or a lion. With slight variations, it remained popular throughout the 4th and 3rd centuries BC.
Among the most characteristic earrings of the 4th and 3rd centuries is the
P 29, 31 horseshoe-shaped plaque type, mounted with a cluster of embossed globules, hollow inside in order to act as containers for perfumed oil. An entirely Etruscan creation, these earrings were very popular throughout the country as can be seen from the many surviving examples and their frequent reproduction on terracotta and vase paintings. Particularly interesting in this respect is a group of votive statues found in Lavinium, depicting female figures bejewelled with necklaces and earrings of this type apparently moulded directly from the gold originals. These cluster earrings remain very frequent in tombs of the 4th century Be and tend to disappear in favour of new models coming from abroad only towards the end of the Classical age.
What we can describe as a ‘Greek Taste’ did not appear in Etruscan jewellery until the last thirty years of the 4th century and must be seen in the context of the general process of Hellenization which followed the conquests of Alexander the Great. The typical Etruscan forms gradually disappeared to be replaced by the more international disc-and-pendants, the pendants supporting shapes such as inverted pyramids, birds, bells and amphorae, or by hoops decorated at the front with amber heads of negroes. In some examples local tradition and external influence blend together; e.g., a gold hoop, decorated at the front with a horseshoe-shaped motif typical of the Etruscan taste, supporting a female head pendant of pure Tarentine inspiration.
Rome and Byzantium
Examples of silver and gold jewellery from pre-Republican and Republican Rome are very scarce. From those that survive we can conclude that between 70o and 250 Be Roman jewellery was for all practical purposes Etruscan. Material is even scarcer for the period between 25o and 27 BC, but we may assume that Roman jewellery, as well as Etruscan, was basically the same as Hellenistic.
For many centuries jewellery was a luxury looked upon with official disapproval in the Roman world. The amounts of gold which might be buried with the dead and which a Roman lady might wear were fixed by law. Certain items of personal adornment, moreover, such as finger rings, were strictly reserved to certain social classes and for specific occasions.
By 27 BC, when the Roman empire was established, Rome had finally swallowed up the remnants of the Hellenistic world with the annexation of Egypt in 30 BC. The political changes, however, had very little effect on minor arts, and during the first years of the empire jewellery continued to be produced in Hellenistic forms. The major centres of jewellery manufacture were the old Hellenistic centres of Antioch and Alexandria, followed by Rome itself. Progressively wealth, luxury and ostentation replaced Republican sobriety and jewellery became important in display.
In the eastern part of the empire and in Egypt earrings designed as plain hoops or hoops decorated with human and animal heads of Hellenistic tradition continued to be produced with only minor variations until the 2nd century AD. Other types consisted of long S-shaped hooks with variously designed pendants. A new type appeared suddenly in the i st century AD and lasted for about a hundred years. It consisted of a gold hemisphere with an S-shaped hook fitted at the back, sometimes surmounted by a similar but smaller boss. This was very popular: many examples have been found as far apart as Rome, Cyprus, Siphnos and Palestine, and it is also frequently depicted on mummy portraits. Closely related is a type consisting of a spherical cluster of pearls or beads.
In the course of the 2nd century AD a whole new class of earrings appeared, quite unrelated to Hellenistic shapes. In its simplest form it consisted of a gemstone set in a large bezel holding a drop pendant, secured to the earlobe by means of an S-shaped hook. During the same period earrings were produced in the form of circular gem-set elements supporting horizontal bars with two or three pendants. Gemstones including sapphires, emeralds, aquamarines and topazes were by now freely employed in jewellery.
Literary sources such as Pliny, Seneca and Petronius have much to say on the subject of inaures andpendentes. Earrings were the favourite manner of displaying wealth for the patrician lady who often turned for advice to the auricolae ornatrices, women whose job was to attend to the problems caused by prolonged wearing of large and heavy earrings. The new extravagance has been referred to by Pliny who tells us that Caligula’s wife Lollia Paulina wore emeralds and pearls on her hair, head, arms and fingers as well as on her ears at everyday functions. Women, he says, liked to wear earrings set with two or three pearl drops that rattled at the slightest movement of the head; hence their name of crotalia.
During the 3rd century AD the Roman empire began to crumble; during the 4th it was divided into an eastern and a western empire; and during the 5th the western half collapsed leaving only the eastern empire, governed from Constantinople (formerly Byzantium). One effect of these changes was that Oriental influences were again powerful in Western art, but as far as jewellery is concerned, Roman techniques and
P. 32, 33 forms continued to be used and earrings with two or three gemset pendent drops remained normal.
Earrings appeared to have fallen from favour during the Byzantine period, with fashionable ladies preferring to wear large and elaborate ornaments on the temple or sides of the face, similar to those worn by the empress Theodora in the mosaic of San Vitale in Ravenna, but they did not completely disappear. The only truly Byzantine form of earring which was popular in the late 6th and 7th centuries consists of a large but light pierced gold crescent decorated with openwork stylized flower and scroll motifs.
In western Europe, jewellery production declined drastically, and only one form of earring stands out as original. This consists of a wire hoop, simple or twisted, decorated with a polyhedral motif, usually inset with garnets. The popularity of this type is confirmed by finds from Ostrogothic, Merovingian and Southern Russian sites dating from the 5th to the 9th century.
The Middle Ages
Although the Middle Ages and the Renaissance are particularly rich periods for jewellery in general, the role of earrings is so minor that one can say that they virtually disappear for the six hundred years between the i i th and i 6th centuries. The reason for this is to be found in hair and dress fashion: elaborate hairstyles, headdresses and high collared costumes left very little scope for earrings.
In the Middle Ages it was customary for a woman, especially married women, to conceal their hair with a coiffe hubet and from the middle of the 12th century with a barbette, which consisted of a stiffened head-band worn with a chin strap concealing the ears. Respectable married women had to keep their heads covered when seen in public, a rule which went back to St Paul: ‘For if the woman be not covered, let her be shorn or shaven: if it be a shame for a woman to be shorn or shaven let her be covered.’ The concealment of a woman’s hair was a way of demonstrating dependency on her husband who was the only man with the privilege of seeing it (a woman loosening her barbette in public would be regarded as unladylike and morally lax) and explains why unmarried girls were allowed to wear long and flowing hair. In both cases, however, the scope for earrings was non-existent; with the barbette the chin band covered the ears and the cheeks, not only preventing the use of earrings but also hindering eating and even speaking; on the other hand unmarried girls with their hair flowing over their ears also did not have the opportunity to display earrings. During the 13th century written evidence for earrings occurs only in books like the Roman de la Rose where unusual jewels such as earrings are listed: ‘Et met a ses deux oreilletes. Deus verges d’or pendans greletes’.
Around the middle of the 14th century hair fashions underwent a considerable change, becoming much more elaborate and frequently embellished with precious
head ornaments. One of the typical coiffures, which developed at the end of the 14th P. 37 century and retained its popularity for more than a hundred years, consisted of two thick braids of hair looped over the ears; another consisted of hair puffed out and padded over the ears and kept in shape by a gold net. The changes, however, did not improve the scope for earrings.

SOFAS IN THE EARLY 19th century: ENGLISH REGENCY SOFA, DANISH DAY BED, AUSTRIAN BIEDERMEIER SOFA, AMERICAN SHERATON SOFA, FRENCH EMPIRE CANAPE.

SOFAS IN THE EARLY 19th century
reached new levels of comfort. Except for the rusbank in the Cape, they were nearly always entirely upholstered, often in silk damask. As a result, the antique motifs that were frequently used on the open backs of chairs of this period were confined to the uprights and top rails of sofas. Similarly because of their weight, the use of splayed legs was less common on sofas than on chairs. At the beginning of the period, the sofa sides tended to be straight or were carved with Neoclassical motifs such as sphinxes. Later, they began to scroll outwards; the sides of a William IV sofa, for example, were often S-shaped.
During the early 19th century there was a revived interest in the day bed and chaise longue. These elegant pieces had a scrolling form and were specifically designed for reclining. They were intended for use in a
drawing room or lady’s bedroom and often had outsplayed legs with brass cappings and casters.
Typically of French Restauration design, the meridienne is a type of canape with two scroll arms, one higher than the other. In Denmark, where people still dined on sofas, meridiennes usually had cupboards on the sides where utensils and glasses could be stored. Because of the nature of their use and the ease with which they could be chipped, sofas were more often made from plain wood rather than completely created in gilt.
As the upholstered surfaces of sofas are particularly susceptible to wear and tear, it is unusual to find pieces from this time with their original
fabrics. Authentic textiles included velvets, silks, damasks, and chintzes. Sprung seats were introduced in this period, bringing a new level of comfort to seating furniture.

The squab cushion provides extra comfort.
The canape has four straight legs at the front and four sabre legs at the back.
Carved sphinx detail
The moulded top rail
has carved lions’
heads at the comers.
The sphinxes have female heads and wings, which form the armrests of the canape.
FRENCH EMPIRE CANAPE
The padded back of this three-seater canape has a straight, moulded top rail, which continues down to form two of the back legs. The front legs and arms are carved in the form of Egyptian sphinxes and terminate in lion’s-paw feet. The
canape seat and back are upholstered in tan suede with black and tan piping and braid. Attributed to the Jacob brothers, this is part of a large suite comprising two canapes, six armchairs, and a pair of stools. c.1800.

This meridienne sofa is typical of its kind, in having one end slightly higher than the other, and is probably French. It is veneered with rosewood and the plinth, supports, and feet are decoratively inlaid with stylized arabesques and
scrolling foliate motifs in a lighter wood. The seat, back, and sides of the piece are generously padded and upholstered in a Neoclassical striped fabric in light green, cream, and gold. The scrolling supports and plinth are supported on volute feet. c.1830.
SWEDISH SOFA
This large, wide, solid sofa has a gently shaped top rail with simple moulding and applied, gilded rosettes at the centre. The form of the sofa is almost entirely rectilinear, with rectangular padded armrests and eight wide,
square-section legs standing on block feet. The seat is upholstered in a striped fabric and is supported on a deep, plain seat rail decorated at intervals with applied rosettes. The sofa is based on a design by Carl Fredrik Sundvall for Skottorp, a manor house in Blekinge, Sweden.
This simulated rosewood and gilt-metal mounted chaise longue has a scrolled three-quarter back and ends and sabre legs. Early 19th century.

SWEDISH PAINTED SETTEE
AMERICAN SHERATON SOFA
This late Gustavian painted and upholstered settee has a rectangular back with three loose cushions. The side panels have circular turned supports, flanking central cross-form supports a frieze with Neoclassical decoration.
The upholstered cushion seat is supported on a carved laurel-leaf frieze and raised on 16 slender, circular, turned legs with long leaf banding. 1800 -10.
This small, inlaid mahogany and flame birch sofa has a sloping top rail with a central raised tablet. The tablet has a contrasting ellipse within an inlaid outline. The edge of the top rail is capped with reeding, which continues
on the downsloping arms. Each arm rests on a reeded baluster support and is supported on tapering, reeded legs. The legs are headed by inlaid panels and terminate in spade feet.
Early 19th century.

AMERICAN NEOCLASSICAL SOFA
This carved mahogany sofa, from the Mid Atlantic States, has a shaped top rail with S-shaped corners, and back-scrolled arms. The upholstered back, sides, and seat are raised on a bolection seat rail, which is supported
on lion’s-paw feet, richly carved with foliage at the knees. The upholstery is not original. Early 19th century.
AUSTRIAN BIEDERMEIER SOFA
This Viennese sofa has a walnut-veneered, partially ebonized frame, and an upholstered seat, arms, and back. It has a high, straight back and outswept, scrolling arms, and is raised on four splayed legs. The upholstery
has a striped, floral design. It has a notably lighter effect than the Anglo-French examples. 1820-30.
The rectangular back of this rosewood-framed Regency sofa has a leaf-carved cresting above square, upholstered arms with moulded terminals. The sofa has a squab seat and is raised on a channel-moulded seat rail. The
whole stands on turned, reeded, tapering feet with brass caps and casters. 1820-30.
DANISH DAY BED
This Danish Louis XVI elmwood day bed has a rectangular, upholstered seat between outscrolled, vertical, slat armrests. With a bolster cushion at either end, the day bed is raised on six square, tapered, and fluted
legs. Unlike a chaise longue, a day bed does not have a back. c.1800.
ENGLISH REGENCY SOFA

Furniture and the Renaissance
There was a revolution in thinking in the fifteenth century which was much apparent in the visual arts but fed through more slowly to the design of furniture. Most of what was made was just a reworking of old themes and styles, even in Italy which was the forerunner of new forms of arts at this time. It was in Italy that late Gothic elements were first replaced by architectural forms such as pilasters, rounded arches, and columns. These designs were decorated with motifs borrowed from classical antiquity.
A 16th century carved cupboard attached to a wall.
This included rosettes, toothed friezes, parallel, and egg and tongue mouldings. Where the structure of the furniture had previously been obvious it was now less obvious and greater emphasis was placed on the beauty of the shape of the piece itself.
Interior furnishing of the home was further extended during the Renaissance with hat stands, mirrors, busts, and bookcases. The choice of furnishings were largely dictated by the architectural character of Renaissance homes.
The functional form of the furniture was partly determined by aesthetic considerations.
CHESTS
This new style was found in chests of the time which became one of the main decorative pieces in the homes of the era. At first the chests were assembled from framing and panels which were initially solely decorated with simple geometric patterns. Subsequently the tops of these chests were embellished with human figures placed at the corners and the panels were often supplemented with mythological or historical scenes.
Chests changed shape in the second half of the fifteenth century, becoming more cubic.
The geometric shapes of the surfaces were now enhanced with figurative decorations and also with plant forms. The feet of these chests were strikingly decorated.
CABINETS
Cabinets and cupboards became increasingly more important in the furnishing of homes. At first these had appeared in town halls and sacristies but they now started to turn up in private homes.
A credence table was used as a dresser. This is a two-door cupboard with sliding leaves beneath a folding leaf with quite limited decoration.
Two cupboards were placed one on top of another in less important rooms that were decorated even less. Cabinets sometimes also possessed a slide out or fold-down leaf which could be used as a surface to write on so that they could act as a bureau.
There were also bookcases, with and without doors and chests of drawers.
A 17th century oak pillow cabinet inlaid with walnut and palisander from the southern Netherlands.
BEDS
A higher standard of living brought a further showpiece into homes — the bed. This formed part of the fitted furniture, attached to the walls. The principal end of the bed was raised and at first sat on a chest-like base but this disappeared around 1500.
During the high Renaissance the bed featured superb examples of sculpture. The richly embellished pillars bore a canopy.

TABLES
Ancient stone furniture inspired Italian craftsmen in their construction of tables leading to two or three highly decorative side-pieces, with caryatids, acanthus scrolls, and winged fantasy animals.
SEATING
Great value was placed upon elegance and comfort by people in this era and this is apparent from their stools, backed chairs, and other seats. Regional variations now arose in the different types of seating.
France
The French were the first to be influenced by Italian arts — because of their eager meddling in Italian politics. Hence the first foreign country to adopt elements of the Italian Renaissance was France. The French were attracted by the reverence for classicism and the humanist attitude of the Italians. Italian artists were attracted to their court circles by the French aristocracy and yet the Gothic influences lived on long after this.
The early French Renaissance period saw development of the Frans I style, which saw late Gothic furniture acquire baluster legs, Corinthian capitals, friezes, pilasters, and decorative mouldings mixed with late Gothic characteristics. Chests, buffets, and benches retained an upright Gothic appearance.
Hence chests remained unchanged for a long time but dressers were used to store cutlery, tableware and other valuables.
The centre section was provided with a drawer for storage or was used to set out the cutlery and tableware. The top sat on Gothic pillars. Early dressers had the corners set back at an angle but later examples were more cubic in form as a result of the pilasters and pilaster legs.
The Gothic form of chair was retained but the armrests were raised and new ,architectural’ details were added. Despite the tremendous influence of the Italians, a new generation of French artists emerged who smothered furniture with a wealth of mouldings. These artists were mainly active in south-western France for in the north there was greater interest in functional design with both form and geometry arrived at logically. This found expression in an harmonic blend of neutral framework with modest decoration.
Cabinets were increasingly constructed with ever more slender legs. The body changed and was decorated with rich reliefs depicting the four seasons, the four elements, and ancient gods. Further south the form remained altogether more plump and cabinets still comprised two parts of equal size.
France already led the way in terms of style for the building of palaces for Royalty and the aristocracy by the sixteenth century. These needed to meet the increasingly refined way of life of the nobility. France also led the way in the style of the interior decoration and furnishings of such aristocratic dwellings. High-backed chairs are very characteristic of this era.
By the late sixteenth century, the shape of people was once more a consideration in the design of chairs and chair backs were lightly curved in order to make them more comfortable. Armrests ending with ram’s heads or scrolls rested on small turned column-like legs.
The high back of the Low Countries was exchanged for the low back of Italy. This development ended though when the Louis XIV style prescribed high chair backs. Very few chairs from this time have survived.
The bed with canopy established a firm place for itself in interior design in France in the sixteenth century. These used upright posts in the form of pilasters or caryatids (female muse forming a pillar) in the Italian manner and for the design of their tables too the French looked to Italy. The leaf was carried by two moulded side-pieces in the form of chimeras or Hermes. There are often column supports between the side pieces and the table leaf. Column legged tables were very popular. These had horizontal stretchers linking them in the form of a double T.
The centre of large halls were often filled with tables with six, eight, or nine legs. It is difficult to differentiate between Louis XIII and Louis XIV tables. This often makes it difficult to date such a piece.
Germany
The Italian Renaissance style die not make headway in Germany before 1500. Its adoption is largely due to the German artists Holbein and Durer. A great deal of work was done between 1525 and 1550 with drawings of ornamentation by the so-called ‘minor masters’. Their influence only extended though to the decoration of the surfaces while form and function remained unchanged.
Only the aristocracy really adopted Italian examples. The citizenry continued to use furniture with Gothic style elements until the arrival of Baroque.
Furniture increasingly became more centrally made in France during the Renaissance but this did not happen in Germany, which was largely fragmented at the time. Furniture in Germany therefore differed from region to region.
NORTHERN GERMANY
The greatest response to the new style was in northern Germany, largely due to examples in the engravings of Heinrich Aldegrever. Yet here too the field was not
wide open for greater ornamentation. There were two important types of cabinet: a large one with a Gothic style front with symmetrical mouldings, and a cabinet on tall legs that resembled a French dresser. The first of these types was decorated in a manner also found with chests from the Rhineland and Westphalia where the Gothic style endured. These chests were often decorated with long panels with lettering.
Most northern cabinets were made of oak while the preference in most other parts of Germany was for ash, larch, or deal (pine).
These timbers remained popular until well into the seventeenth century. High relief carving is particularly characteristic of northern German furniture of the time. The carcass was also decorated with allegorical or religious representations such as fertility rites and scrolls on the top moulding and also with sculptures of female muses as pilasters. This type of cabinet was made in Schleswig-Holstein until late in the Baroque era. Another type of piece that is typical of northern Germany is the small but tall ‘farmer’s’ cabinet.
There were a number of variations in type of northern German chests of the sixteenth and seventeenth centuries. The variant originating from Luneburg was the least changed of these from its predecessors. This type was made by joining planks together and it stood on tall legs.
Those from Holstein were supported on chest-like bases and were decorated in the same manner as cabinets from this region. Chests from Bremen had the form of cube that is slightly taller than it is wide.
SOUTHERN GERMANY
There was a marked preference for fine inlay in southern Germany. Italian architectural features were introduced via Augsburg where the local cabinetmakers were very active in the use of exotic woods such as palisander and ebony and also native timbers like maple, beech, cherry, and poplar for inlaying. A characteristic of late Renaissance furniture is the thoroughness of its making. Decorative designs were made by famous artists such as Burgkmair and Holbein. The plinths, centre parts, and cornices of these cabinets gave them a somewhat horizontal appearance. The main lines of southern German cabinets are largely lost beneath a welter of ornamental and architectural detail.
In reality they still consisted of two pieces. The decoration comprised Doric friezes, vines, symmetrical grotesque motifs, egg and tongue mouldings, and triglyphs. The sculptor and architect Peter Flotner exerted considerable influ-
This early 18th century southern German or Czech trois corps or three part cabinet is of amboyna over deal. These cabinets incorporating a secretaire were made from Strasbourg to the Balkans.
The grain of the wood was also allowed its full expression. Southern German chests often had drawers in the bottom and the lids featured decoration divided into panels. The status of chests gradually reduced until eventually they were only found as furniture in farmhouses. Despite this chests were still made in southern Germany, with walnut being increasingly used.
Tables based on chests arrived in southern Germany from France and remained until late into the Baroque period. The influence of Gothic continued to be readily apparent.
Beds were free-standing with canopies mounted on posts with short valances or curtains. Very few chairs of this period from southern Germany have survived and those that have show clear signs of Italian Renaissance and German Gothic.
The ‘farmer’s chair’ with square seat is the simplest form. Extensively carved chair backs and angled legs were adopted from Italy. This type of chair continued in existence until well into the eighteenth century in the Alps and southern Germany. In addition, there were many chairs with square rear legs that extended upwards to form the uprights of the back of the chair. Richly carved horizontal stringers were placed between the legs to make the chair more rigid.
Another widely found type of chair has arms, leather seat, and scissor-legs. A new type of ‘Dutch’ armchair appeared around 1600 with turned legs or moulded balusters that became very popular in the seventeenth century. Folding chairs also continued in use, especially in Switzerland.
The Low Countries
The Catholic southern part of the Low Countries was mainly influenced by the French but the north went its own way. Furniture makers in the north were influential upon sculptors in Mecklenburg and Lubeck.
The preference in the Dutch Republic of the Seven United Provinces of the sixteenth and seventeenth centuries was for inlay with contrasting coloured woods, especially with ebony and rails, balusters, and carved pilasters were greatly favoured. Chests of this period exhibit the same features. Between 1725 and 1750 there was a marked preference for richly carved pieces.
By the late sixteenth into the seventeenth century many homes had a two-storey cabinet with protruding cornice. The upper part of the cabinet was slightly set back.
There were many regional variants on this theme with cabinetstypical of North and South Holland, Zeeland (with tall legged underframe), and Gelderland. This type of cabinet was also much desired in Cologne where they developed their own richly embellished style.
England
There was some small but increasing influence from the European mainland on England during this period. The dominant style was Elizabethan, after the name of Queen Elizabeth, characterised by simple interpretation of French but mainly Flemish Renaissance. Gradually the Gothic pointed arches and rosettes were replaced by heavy baluster legs, friezes, and other classical architectural elements.
The solid oak ‘four-poster’ canopy beds of this era are famous and many can still to be seen in castles and great stately homes.

Easy chairs before 1840
As the Baroque movement swept through Europe during the late 17th century, the design of seat furniture became increasingly luxurious, elaborate, and more importantly comfortable. Caned and leather chairs, which until this time had sufficed, were largely abandoned in favour of richly upholstered easy chairs as stiff upright backs were discarded and were replaced by sloped and subsequently shaped backs. The number of types of chairs also increased enourmously.
ITALY AND FRANCE
It was in Italy, particularly in Venice, Florence, and Rome, during the late 17th and early 18th centuries, that the Baroque style found its clearest expression. The most elaborate open armchairs of this period are usually of either boxwood or giltwood. They are carved with scrolling acanthus, espagnolette masks, and even mythological figures emblematic of the four seasons. Some Venetian examples feature seahorses in deference to the city’s seafaring tradition. Such pieces were usually the work of trained sculptors who had turned their hand to furniture-making; the most celebrated of these was undoubtedly Andreas Brustolon (1662-1732).
In France, under the influence of Cardinal Mazarin, the court of Louis XIV (1643-1715) became increasingly hungry for foreign luxuries and fashions, especially those from Italy. In the mid-17th century French easy chairs became increasingly comfortable and elaborate, owing to their generous proportions, richly turned decoration, and lavish use of velvet upholstery from Genoa or Utrecht.
The Regence period (1715-23) saw significant developments in the design of seat furniture. Although the menuisiers (joiners) were slow to abandon the traditional Louis XIV fauteuil (armchair) form, they were increasingly lavish in their carving. Chairs were decorated with gadroons, shells, and rosettes, and even richly upholstered in velvet or lavish textiles made at the Savonnerie in Paris (est. 1604 in the Louvre for the production of textiles; from 1627 at the Savonnerie). The stretcher became more sinuous, and was abandoned by the 1720s. Further changes in form and design were
dictated by the fashion for wearing hooped dresses, introduced c.1720, which resulted in the arms of easy chairs being set back by a quarter of the length of the side-rail. The introduction of upholstery it    allowed the loose covering to be changed according to the season.
Under Louis XV (1715-74) the fashion
for placing chairs around the sides of the room was abandoned in favour of a more relaxed arrangement that encouraged intimate conversation and gave birth to the fauteuil en cabriolet, with its Rococo form and exuberant carving in the round. Louis XV seat furniture is usually made of either walnut or beech, the latter wood
always either gilded or painted; a
pegged construction was used, and pieces are very often stamped by the menuisier responsible, in accordance with the strict rules of the furniture-
makers’ guild (Corporation des Menuisiers-Ebenistes). During the 1730s numerous styles of informal easy chair emerged, all of them richly carved. The most luxurious was the bergere, which was popular throughout the 18th century and characterized by its deep seat, padded back and sides, and squab cushion. Widely copied throughout Europe, it was to prove inspirational to chair-makers during the Regency period (c.1790-1830) in Britain, and was also much copied in the late 19th and
20th centuries.
BRITAIN AND NORTH AMERICA
The earliest-recorded wing armchairs, known as bergere en confessionnal because the identity of the sitter was hidden by the side wings, are French examples from the early 1670s. Invariably of walnut, this form was rapidly adopted in Britain. The wing armchairs made during the late 17th and very early 18th centuries were usually of walnut or, in more provincial examples, of beech stained to simulate walnut. These armchairs are characterized by the exaggerated scroll of the arms, the high, slanted back flanked by high wings, and the stylized carving of scrolls and foliage on the legs and stretchers.
The most celebrated form of wing armchair was made from the early 18th century until c.1750. Examples are usually of walnut, and are
supported on cabriole legs, which, unlike their 17th-century prototypes, are rarely joined by stretchers. Wing armchairs made in Britain during the reigns of Queen Anne and George I are often carved with trailed husks and scallop shells on the top of the knees and stand on pad feet, although some later examples have hoof or claw-and-ball feet. The most refined wing armchairs of this period were upholstered in gros and petit point needlework, often with figures on the back (but never on the seat) within a flower-strewn border.
Wing armchairs continued to be made throughout the 18th century in mahogany, and were widely copied in walnut in the 19th and 20th centuries. North American early 18th-century wing chairs were generally of walnut or maple, with a high arched crest, and block and vase turned legs joined by a stretcher. During the 1720s short cabriole legs with “Spanish” feet, were used and front stretchers were eliminated. From the mid-18th century mahogany was used. Stretchers continued to be used in New England, while easy chairs made in Philadelphia generally did not have them. In 1760 the serpentine crest design was introduced, modifying the verticality, and it was used along with the rounded profile until the 1780s. Between 1780 and 1800 American chair-makers used George Hepplewhite’s design for a “Saddle Check Chair”, an easy chair with serpentine contoured wings, straight legs, and “H” stretchers, a chair design also associated with Thomas Chippendale (1718-79). There are regional differences in construction and upholstery. Maple was often used for the one-piece rear legs and stiles in New England chairs, stained to match the mahogany of the front legs.

A Library bergere or “Uxbridge” chair
This British armchair is of a style introduced in the early I8th century for use in the library. It has a cane-filled back and sides, and leather-covered cushions, the best examples have reeled or fluted front legs (early 19th century; ht 1.2ml3ft 1 lin; value 1)
Other types of late 18th-century easy chair were based on designs in The Cabinet-Maker and Upholsterer’s Drawing Book (1791-1802) by Thomas Sheraton (1751-1806) including “conversation” chairs, with deep upholstered seats and padded toprails on which the sitter, facing backward, could rest his or her arms. In Sheraton’s The Cabinet Dictionary (1803) there is a reference to a “curricle” chair, so-called after a tub-shaped carriage, which was popular in libraries at the time. About 1810 to 1820 bergere-type armchairs with deep, upholstered or leather seats and backs, and cane or upholstered sides, were also widely used in libraries.
SCANDINAVIA
Trade between England and Scandinavia was well established by  the mid-17th century, and some English furniture had been exported to Scandinavia by the end of the century. Craftsmen in these countries produced good copies of English furniture; the joiners (although not the cabinet-makers) were very conservative, with the result that early 18th-century styles continued to be produced until c.1800. Around this time, too, mahogany was introduced; before this, walnut was used for expensive pieces. More commonly employed, however, were native light-coloured woods such as birch, ash, and pine; these were left bare, stained, or painted in colours.
By the late 1730s French designs had become increasingly popular at the Swedish and Danish courts and also with the upper classes in these countries; the middle classes did not generally adopt the new fashions until the end of the century. French styles were particularly influential in Sweden, and from the Rococo period court architects were trained in Paris. One of the most influential Swedish designers of the period was Jean Eric Rehn (1717-93). Danish court architects learned their trade in Germany, but this situation changed after the reign of Louis XVI, when both countries adopted the French Neo-
classical style. In Sweden the cabinetmaker Georg Haupt (1741-84), who had trained in both Paris and London is well known for his work in the Louis XVI style. This style developed into the Neo-classical Gustavian style during the I 770S.

AMERICAN “CHIPPENDALE”
The carvers of the most elaborate American Rococo furniture were immigrants from England, Scotland, and Ireland, who had served their apprenticeship in London before going to North America. The first of them arrived in the 1740s, but the great wave of craftsmen tsmen was in the 1760s. Philadelphia was the city most hospitable to immigrants, and more Rococo furniture was produced there than in other colonies. The major cities in America developed distinctive furniture styles, due to the taste of the gentry, the mix of native born and immigrant craftsmen, and the availability of imported
furniture and English pattern books. It is known that there were copies of Chippendale’s Director in Philadelphia. The Library Company of Philadelphia acquired a copy between 1764 and 1769, and two cabinet-makers Thomas Affleck (1740-95) and Benjamin Randolph, owned copies. In America furniture was mostly made of solid pieces of primary wood, rather than veneers over a seconday wood carcase as in England.

RUSSIA
Throughout the 18th century Russian furniture was inspired by French and to a lesser degree English designs; by c.1815 German influence is also apparent. Generally the timbers used for Russian furniture were indigenous; during the early 18th century, when designs were dictated by early Georgian furniture from Britain, they included oak, beech, and walnut. By the 1720s Russian armchairs had tall curved backs with a vase splat and cabriole legs. By the mid-18th century, the taste for Rococo and Chinese ornament had spread to Russia due to the publication of such influential pattern-books as The Gentleman and Cabinet-Maker’s Director (1754-62) by the English cabinet-maker Thomas Chippendale (1718-79). English-style chairs with pierced splats and sweeping cabriole legs with claw-and-ball feet, usually made in mahogany, were increasingly popular.
However, from the beginning of the 19th century the clearest influence on Russian furniture manufacture was that of France. Particularly favoured was the Empire style of the cabinet-maker Georges Jacob (1739-1814), who was based in Paris. About this time, light-coloured woods also became popular, anticipating the Biedermeier style in Germany and Scandinavia. From c.1815 chairs were executed in indigenous woods such as Karelian birch, maple, and poplar, decorated with restrained stringing.
HALL CHAIRS
Hall chairs (and also hall benches) were introduced in Britain from the late 17th century. They may have been inspired by similar chairs known as sgabelli, which were popular in the great Italian palaces during the 16th century. Hall chairs were designed to be placed in the entrance hall or passageways used by servants and tradesmen waiting to be called into one of the main rooms. Consequently such chairs were never upholstered, and generally they lacked arms; however, they were increasingly made of mahogany, with solid backs and dished or shaped scats. The designs were bold and simple and were frequently embellished with the painted crest or coat of arms of the family who commissioned them. In some cases they were carved with motifs intended to impress guests and to emphasize the social status of the owner. The importance given to hall chairs is suggested by the fact that there are six designs for such chairs in The Gentleman and Cabinet-Maker’s Director by Thomas Chippendale, three in The Cabinet-Maker and Upholsterer’s Guide (1788-94) by George Hepplewhite (d.1786), and two in The Cabinet Dictionary (1803) by Thomas Sheraton (1751-1806).

THE BIEDERMEIER STYLE
This decorative style was popular in Germany, Austria, and Scandinavia between c.1815 and c.1848. The name was invented by two German poets who wrote under the pseudonym Gottlieb Biedermeier, formed from a combination of bieder (meaning conventional or honest) and Meier, a common German surname. The solid, comfortable appearance of Biedermeier pieces was thought to mirror the unpretentious elegance of the German bourgeoisie. The simple, geometic designs, which eschewed ornate decoration, were inspired by French furniture of the Empire period. Function and comfort were of supreme importance to the Biedermeier craftsmen and to achieve this end they used coil-spring upholstery.

•    UPHOLSTERY gros and petit point arc very rare and greatly contribute to the value of a wing armchair
•    REGILDING well-executed regilding should not dramatically affect the value of an object; French Louis XV beechwood chairs were usually originally gilded or painted and traces are often found in the crevices
•    HALL CHAIRS these arc usually found in sets of four or more, although it is possible to find single chairs; they are often decorated on the back with a cartouche featuring the armorial of the family who commissioned them; they are generally very good value for money
•    COPIES AND FAKES Brustolon-style chairs were widely copied in the 19th century; Biedermeier chairs have been been widely faked in the 20th century, with many side chairs converted into armchairs – this should be obvious if the proportions seem wrong

Bookcases and bookshelves
The early history of the bookcase is tied up with the development of monastic and collegiate book collections. Books were a great luxury long after the invention of printing, and even the wealthiest people who knew how to read were unlikely to possess more than a few, which Could easily be stored in a chest or cupboard. The bookcase developed both in its own right, as a piece of library furniture, and in conjunction with other pieces such as bureau bookcases. The first bookcases of any significant note date from the early 18th century.
18TH-CENTURY BOOKCASES
Early 18th-century bookcases are extremely rare, and were made in oak veneered in walnut, of simple design and proportions. Examples were flat fronted and of two sections: the upper section was glazed with simple rectangular panes, while the lower section had two doors behind which were drawers. By the mid-1730s the form had become increasingly heavy and architectural, in the manner promoted by William Kent (c.1685-1748). Features include a broken pediment, pilasters, and richly carved Classical decoration.
By the mid-18th century the severely architectural Palladian-style bookcase was displaced by the lighter Rococo style. A familiar bookcase design, comprising a main central break-front section and two side wings retaining its upper glazed section, was developed. The preferred wood for bookcases, as with all furniture of this period, was mahogany. The scrolled pediment above the break-front centre was often pierced after 1750. Thomas Chippendale (1718-79) included 14 designs for bookcases in the third edition of The Gentleman and Cabinet-Maker’s Director (1762). Until c.1750, solid glazing-bars were used to retain the rectangular panes of glass in the upper section. After this time they were largely replaced by astragals (glazing-bars with semicircular profiles), which could be arranged in more elaborate and varied patterns, including Gothic and chinoiserie designs. The astragal decoration usually conforms to that on the rest of the bookcase.
From c.1770, Neo-classicism became by far the most important influence on the design of fashionable bookcases. The architect Robert Adam (1728-92) specifically designed large bookcases to correlate with the architecture and overall decoration of the rooms for which they were intended; they were usually made to stand in recesses. Some bookcases were made in satinwood while others were made in inexpensive pine and painted in various colours with gilded enrichments. Adam’s designs were published and particularly well received in Italy, and his influence may be seen in rare examples of grand, painted, and parcel-gilded Neoclassical Italian bookcases of the late 18th century.
The bookcases detailed in The Cabinet-Maker and Upholsterer’s Guide (1788-94) by George Hepplewhite (d.1786) were even more luxurious; the doors were veneered with waved or curled mahogany, which was sometimes crossbanded and inlaid, and were fitted with simple ring handles. The designs in The Cabinet-Maker and Upholsterers Drawing Book (1791-1802) by Thomas Sheraton ( 1751-1806) illustrated a new fashion for a lighter, narrower bookcase with a taller lower section. This type of bookcase was typically veneered in satinwood and topped with a lightly scrolled or lunette-shaped pediment, vase finials, and delicate mouldings. Some bookcases contained gathered silk curtains behind shelves in the centre, bordered by panels or doors, “calculated to contain all the books that may be required in a sitting-room without reference to the library”. This generally featured applied metal ornaments and gilded columns or terminals. Revolving bookcases were introduced c.1810, initially in circular form, although rectangular shapes were also produced;
rectangula examples of this space-saving form were made during the Victorian and Edwardian periods.
A great change took place in the early 19th century, initiated by the London publisher William Pickering (1796-1854), who issued books in cloth bindings, thus reducing their price and bringing them within reach of the general public. Machines were introduced for gluing, rather than sewing, the pages together. Together with the expansion of education, book-buying was encouraged. The increasingly literate population therefore created a demand for attractive book-storage space. Gothic Revival bookcases were generally made in oak and were in a style that was interpreted either as a basic functional bookcase, with decorative architectural details grafted onto it, or as a more authentic interpretation with exposed joints. This rather masculine style was considered to be an appropriate one for the Victorian library. One of the most popular types during the 19th century was the secretaire bookcase.
19TH-CENTURY BOOKCASES
In The Cabinet Dictionary ( 1803), Sheraton referred to the “bookshelf” or bookstand, which was a set of light, low, open bookshelves with socket casters on the feet, making it easy to move. There was a
variety of designs, some of which resembled the open-tiered whatnot or etagere. Dwarf bookcases were also in use at this time, and were particularly suitable for delicate Neoclassical decoration. In his book A Collection of Designs for Household Furniture and
Interior Decoration (1808), George Smith (active c.1786-1828) recommended placing a dwarf bookcase at each end of a room, with a library table in between, to produce “a grand and pleasing effect”. Also popular was a hybrid version of a low bookcase and a commode, with revolving bookcase.
The patent for the revolving bookcase, a way of storing books and saving wall space, was taken out by Benjamin Crosby in 1808. This type of British rectangular mahogany bookcase was particularly popular in the Edwardian period and continues to be made today.
• ALTERATIONS make sure that the proportions of the bookcase are correct, as some were reduced in height or width in order to fit into the smaller 20th-century room: a large bookcase with up to six sections may well have been reduced to four, which could affect the Value of a piece considerably; pediments have often been flattened off, again so that the bookcases can fit into a room with a lower ceiling.
• GLAZING the astragals should be rebated into the door frame, and this should be visible on the inside of the door; in later 19th-century versions the glass is usually of one piece, and the mullions arc simply laid on top.
• PROPORTIONS the glazed section of a late 18th-century bookcase is frequently less deep than the base.
• MARRIAGES as in all two- or three-part furniture, it is important to establish that all the parts started life together and that the following features correspond: the quality, colour, patina, and figuring of the wood; the methods of construction; the decorative details such as applied moulding.

High chests-of-drawers
Chests-on-stands, also known as high chests-ofdrawers or highboys, were a development of the chest-of-drawers. The form comprises a series of short drawers at the top, three or four long, graduated drawers beneath, and two or three drawers in the stand. The form was made in England from the end of the 17th century in walnut veneer, with double-twist turned supports, barley-twist or cup-and-cover legs, flat stretchers, and a plain moulded cornice. This piece of furniture became a singularly American form after c.1730.
AMERICAN HIGH CHESTS-OF-DRAWERS
From the 1690s to the 1730s, following the popular London styles, cabinet-makers in New England and Pennsylvania made chests-of-drawers on tall barley-twist, scroll, and trumpet-turned legs, with matching dressing tables (lowboys) for use in the bedchamber. Their arched aprons (skirts) generally accommodated three drawers. Blind frieze drawers are found on some made in New York and New England. The finest are veneered with richly figured burr-walnut, their drawers
outlined with herringbone veneer. Others are made
of solid maple or cherry, and some are painted. Several from Boston, with four cabriole legs instead of six turned ]cgs, have their original japanned decoration.
By the 1750s high chests with broken-arch pediments had come into vogue. The Philadelphia high chest was tighter and more graceful, with a richly carved middle drawer in the lower section, the uppercase, like the lower, flanked by fluted quarter columns, and topped
by a richly carved broken-arch pediment with carved rosettes, a cartouche in the centre, and flame finials at the corners. The typanum of the arch, no longer housing a drawer, was filled with Rococo streamers, leaves, and grasses, while carving decorated the apron and knees. The Gentleman and Cabinet-Maker’s Director (1754-62) by Thomas Chippendale (1718-79) influenced the design of a horizontal cornices, which in the 1760s and 1770s separated the carved scrolled pediments from the unadorned facades of the drawer fronts.
High chests made away from the coastal cities are country versions of those made in urban centres. Those made in Lancaster County inland Pennsylvania, reflect the Philadelphia style, while those from the back country of the Shenandoah Valley are largely influenced by Pennsylvania forms that the settlers of that region were familiar with; eccentric maple chests, stained to simulate mahogany, were made in New Hampshire by the Dunlap family, suggesting their Scottish/ Irish origin. In New York and the South they preferred the chest-on-chest form.
• CONSTRUCTION some flat-top high chests were fitted with pedestals for displaying ceramics.
• Alterations high chests were made in two parts, which were sometimes separated; the top was often given feet and sold as a chest-of-drawers, and the bottom given a new top and sold as an over-size dressing table or serving table; even in their altered states, they are considered of value.
• COLLECTING in the USA high chests have long been the most highly priced type of furniture; matching high chests and dressing tables will achieve a premium.