Posts Tagged ‘settee’

MID 19TH CENTURY SOFAS
THE MAJORITY OF 19th-century sofas were designed either for comfort or for formal seating. The fluidity of the revival styles during this period allowed for a certain poetic licence in the designs.
COIL-SPRING UPHOLSTERY
The French fashion for upholstering their luxurious canapes with sumptuous, overstuffed seats and padded backs soon spread across Europe. The increased thickness of the upholstery was the result of the introduction of coiled springs. These were, in themselves, quite deep, but they also required a thick layer of padding to prevent them from piercing the seat cover. Deeply set buttons were used to hold both the springs and the padding in place, and became a feature in themselves.
The fabrics used to cover these upholsteries were often extremely expensive, making it necessary to
shield furniture from direct sunlight, hence the Victorian reputation for gloomy interiors. Both petit and gros point were popular.
The confidante, or tote-d-tote, evolved from the standard French canape as a slightly less formal design, allowing couples or parties to sit together and converse while facing each other. These were fairly variable forms, as were many of the Rococo-revival, show-frame sofas, chaises longue, and daybeds made at this time. They contrasted with Neoclassical- and Empire-revival styles, which made greater use of flat planes and regular angles.
Towards the end of the period, influences from the Middle East and the Orient began to infiltrate sofa design in the West. Turkish-style daybeds, Chinese bamboo frames, and the no-nonsense Arts and Crafts aesthetic started to reverse the trend for decadent, comfortable seating.
The lion’s heads are supported on turned columns.
The arched top rail above the panels is inlaid with floral marquetry.
The seat back has scroll-topped supports.
The capriole legs terminate in claw-and-bail feet.
Each seat is CauCaVcfronted with a marquetry inlaid apron
The base of the chair back is galleried, with turned spindles.
DUTCH HALL BENCH
The triple concave-shaped back of this mahogany and marquetry-decorated bench has a moulded crest and a carved lion’s head at each seat division. The sweeping arms terminate in carved heads. The shaped seat
has a similarly shaped apron and is raised on four carved capriole legs to the front and two slightly sweeping, square-section legs to the back. The entire bench is profusely
decorated with marquetry inlay, depicting flowers, leaves, urns, birds, and insects.
This early Victorian, Rococo-revival, show-frame sofa is made of rosewood and has a generously upholstered seat, arms, and back. The serpentine seat is supported on scroll-carved cabriole legs, terminating in ceramic casters. c.1850.
BRITISH WINDOW SEAT
This mahogany, Regency-revival-style window seat has an upholstered back, outswept sides, and seat. The frame of the window seat is carved with acanthus and is supported on scroll legs with paw feet. c.1900.
BRITISH SHOW-FRAME SOFA
FRENCH DAY BED
This carved walnut and upholstered day bed is designed in the Louis XVI style. The reeled and scroll arms carved with leaves and the loose cushion seat are covered in a beige fabric and raised on turned and stop-fluted legs, joined by
a rope-carved apron. This piece would have been made for an alcove and placed parallel to a wall. It may originally have had a canopy of matching fabric suspended above it.
This carved oak and walnut bench has a galleried back with carved panels, depicting dragons, figures, and cherubs. It has square arms above a solid seat and is supported on spiral-turned legs.
This Louis XVI-style walnut canape has a carved crest rail above a padded back. The cushioned seat is supported on fluted, tapered legs, which end in peg feet. c. 1900.
This is one of a pair of Napoleon III-style ebonized sofas. The back is in three sections and has a central shaped, rectangular, upholstered panel flanked by two similarly upholstered oval panels in carved gilt frames.
The padded seat is supported on six turned and fluted legs, terminating in pad feet. The sofa is attributed to Charles-Guillaume Diehl. The tapestry upholstery was probably made by the prestigious Aubusson company. BK 6
AMERICAN SETTEE
This carved walnut settee has an undulating back and a crest rail carved with flowers and grapes. The padded, upholstered arms scroll outwards and show William IV influence. The padded, upholstered seat has a similarly carved
serpentine apron and has additional side cushions. The whole settee is supported on slightly cabriole legs. Chairs and sofas featuring elements of ornate, naturalistic carving in the Rococo-revival style were very popular in the United States, particularly between 1830 and 1865.
This walnut, tub-shaped settee has an upholstered back, armrests, and seat. Originally, it was almost certainly part of a salon suite. The settee has a pierced back and is supported on turned legs, terminating in brass
casters. Neoclassical in style, it was probably inspired by Sheraton’s furniture designs, combining the simple geometric forms of the pierced back with the gentle, curving contours of the seat and upholstered back shape. c. 1900.
This mahogany, Empire-revival settee has a scrolled crest rail, upholstered seat and back, and padded arms. The frame of the settee has Neoclassical gilt-brass applied mouldings throughout and is supported on turned legs. Late 19th
century.

Settles and sofas after 1840
The revival of interest in historical styles from the mid-19th century resulted in a multiplicity of designs for all types of furniture, including sofas, which were often made as part of the new salon or parlour suites. A major technical development during this period was use of the coil spring, patented in 1828, which resulted in sturdier, bulkier, and squatter designs that sacrificed form to comfort. These deeply upholstered seats, with their button backs, culminated in the Chesterfield, which was the first fully upholstered sofa.

Seat furniture
The period c. 1860 to (.1880 was in many ways the golden age of upholstery. Stuffing had been growing steadily thicker from the 1840s, and buttons were introduced to prevent the thread holding the stuffing
in place from pulling the covering material. Extra fabric was necessary to create the familiar diamond pattern of buttons or threads characteristic of the deep, luxurious upholstery, with its air of prosperity and comfort, so admired by the Victorian middle classes. The development of the coil spring made increased demands on buttoning. Whereas sofas had previously been stuffed with layers of wadding and horsehair, coiled metal springs were now used. The springs were supported by a layer of hessian webbing, covered with more webbing, which in turn was covered with horsehair stuffing and padding. As a result, Victorian sofas were much more comfortable than early 19th-century examples, but they were also much bulkier; many sofas had button backs to emphasize the new upholstered look. The luxurious effect was emphasized by the use of velvet and other elaborate fabrics. Sofas with their original worn upholstery arc more collectable today than those with high-quality restoration using an inappropriate fabric.
French sofas were generally lighter in design than British examples, since French craftsmen and manufacturers employed such revival styles as Rococo and Louis XVI, making use of giltwood and lighter upholstery fabrics. In the USA, parlour suites on a grand scale were produced by such leading makers as John Henry Belter (1804-63) of New York, who in the 1850s created laminated and moulded rosewood sofas with deep pierced carving. Renaissance Revival suites, with square-backed sofas, were also popular, while the fashion in Europe and the USA for “Turkish” corners gave rise to over-stuffed upholstered sofas with elaborate fringing.
Edwardian sofas of the first two decades of the 20th century borrowed heavily from Neo-classical styles –especially the designs of Thomas Sheraton (1751-1806) – and from Regency styles, but managed to avoid the excesses of Victorian interpretations. Suites of chairs with matching sofas were produced; these were generally made from mahogany, or occasionally from walnut or satinwood. Sofas and chairs often had caned backs and sides, with silk or damask upholstery.

•    CHALSES-LONGUES these are not particularly commercial as they can be large and not very comfortable to sit on; examples with good shapes are more popular, as are those that are more heavily carved
•    GILDING good-quality regilding is quite acceptable if well executed– the highlights should be burnished, and the quality of the carving evident; beware of spray gilding – this will have a flat, matt appearance, with a very even coverage
•    RE-UPHOLSTERY the condition of the upholstery should be carefully examined, as seating can be very expensive to re-upholster; furniture with taut webbing is
preferable to that with springing, which tends to give an overstuffed look
•    COLLECTING many sofas and settees were originally part of parlour or salon suites, which are now rarely found complete; three-seater examples are generally more commercial than two-seater

Seat furniture
Until the 17th century most seating was provided by the stool; box-settles were also common in wealthier households. Side chairs and armchairs were introduced in the 16th century and the settee in the mid-17th century; this evolved over the next 200 years into the fully upholstered sofa. The demand for comfortable seating increased throughout this period, with upholstery gradually
eclipsing wood carving and decoration, especially after the introduction of the coiled spring in the 1820s. Over the centuries seating has been profoundly influenced by a succession of styles and forms, from the extravagant Baroque to the austere Neoclassical, all of which have been revived by later generations of craftsmen. The interest in historical design continues to this day.
Stools
The stool has been in use for thousands of years, and was and is common in one form or another to all civilizations. Its often simple construction and its portability have ensured its lasting popularity. Until the 17th century, seat furniture with backs and arms was scarce, and the chair was reserved for the head of the household; most seating was provided by the stool.
17TH-CENTURY JOINED STOOLS
Inventories from the 17th century show that stools existed in large numbers and were reserved for members of the household who had sufficient status to sit at formal occasions. This hierarchy persisted in court circles well into the 18th century. Most stools found today were made from the 17th century onwards. As with all types of furniture, examples of stools before 1600 are rare and those that come onto the market can be valuable. The simple, pegged, oak stool with carved decoration is probably the most common type. Called a joined or joint stool, it was made by a joiner, with mortise-and-tenon joints secured by pegs. Although regional variations exist, the design was basically the same throughout Europe. Generally only those pieces that were well made in good-quality wood have survived, and many stools intended for everyday use have long since disappeared.
Joined stools could be extended in length to become benches and were occasionally made with a small drawer underneath the seat. Even at this early date they were often made in sets, a practice that was to become widespread in later centuries. Originally the seat would probably have been softened with a squab cushion but during the 17th century padding became an integral part of the stool as the demand for comfort increased.

LATER STOOLS Because stools were perennially popular they tended to keep up with fashion trends. In the late 18th century British stools were made after designs in The Cabinet-Maker and Upholsterer’s Guide ( 1788-94) by George Hepplewhite (d.1786) and French stools after designs by Pierre Fontaine (c.1762-1853) and Charles Percier (1764-1838), as well as those in Receuil de decorations interieures (1801-12). Shapes diversified as the interest in historical styles and forms, whether real or imaginary, took hold. For example, the X-frame form, first made in ancient Egypt and common in Europe during the Renaissance, was revived in Europe and North America during the early 19th century.
The 19th century saw an increased use of mechanization, which enabled carving to become extremely elaborate, and stools were made in a variety of bizarre forms with carved and moulded decoration. From the third quarter of the 19th century a new type of upholstered seating, the pouffe, was introduced. The upholsterer played an increasingly prominent role in furniture-making as comfort became an ever more important criterion.

•   COPIES OF JOINED STOOLS during the 1920s and 1930s
many copies were made of the joined stool; signs of a genuine example include wear in the right places, such as the stretchers; irregular pegs that stand proud due to shrinkage and are visible on both the inside and outside of the frame; “dry” wood underneath the seat
•   GEORGIAN STOOLS look at the colour of the wood under the seat rail (the drop-in seat should lift out) – this should be “dry” and unstained; exercise caution with small stools, which are popular with collectors – fakers may have used the front pair of legs from two damaged chairs and fixed them into a seat rail; check for odd proportions and for tops of legs hidden by the seat rail