Posts Tagged ‘side tables’

MODERNISM TABLES
AS WITH MOST FORMS of furniture
during the interwar period, tables were subjected to a radical process of reduction. All details deemed superfluous were stripped away to leave what designers considered to be a pure, practical form.
Marcel Breuer, the Hungarian-born student-turned-teacher at the Bauhaus, was the designer who most successfully achieved the desired, pared-down look. Utilizing tubular steel, a material that he is said to have borrowed from the bicycle-making industry, he produced tables that expressed little beyond their own function.
Eileen Gray’s tubular-steel and glass side tables, now known as the E1027 tables in reference to the house for which she designed them, may not be as rudimentary as Breuer’s tables, but they display more invention. The tops of the tables can be adjusted to sit at differing heights, and the table’s stem
is placed at the side to allow the table top to come over air item of furniture (which, in Gray’s case, was her own bed). Such versatility was to become a key feature in table design of the Modern era.
Since many designers in the interwar years were reacting to the excesses of the Art Nouveau style, most table tops were either a simple, unadorned circle or square. It wasn’t until after World War 11, with the advent of a more organic style, that this strict design principle was relaxed and irregular shapes came into use.
Glass, plywood, and tubular steel were always considered the most cutting-edge materials from which to make tables (due to their close association with industry), although some designers did use solid wood. If this was used it was considered important to avoid all efforts to carve or decorate it, thereby keeping its surface as clean to the eye as possible.
The tables “nest” so as to save space in small apartments.
The black-painted tops hide the wood grain and give the tables
an industrial look.
Chrome plating g) ves the tubular steel an alluring gleam.
NESTING TABLES
This series of four nesting tables fits neatly, one above the next, in a stack. They all have the same depth, but increase in width and height as they grow in size. Each table has a simple, rectilinear, chrome-plated tubular-steel
frame and a black-painted wooden top. The top sits flush with the table frame. Designed by Marcel Breuer at Bauhaus Dessau in 1925-26, it is thought that they were initially designed as stools. This example was re-issued by Toots in 2004. Largest table: H:60cm (231-,in);
W.66cin (26in); 0:38cm (151n). TEC 2

GLASS DINING TABLE
Made of tubular steel, the frame of this table consists of a rectilinear base. At the top, at each end of the table, is a semi-circular support for the glass table top that interlocks the base. There are rubber pads on the
supports, where they come into contact with the table top, to cushion the glass and prevent slippage. The glass top has been ground at the corners to produce smooth curves. Attributed to Emile Guillot and produced by Thonet, Paris. 1930. H:79cm (311m): W:120.5cm (471in); D:725cm (281in). WKA 4
BLACK-ENAMELLED TABLE
The chrome-plated tubular-steel frame of this dining table offers a support for the black-enamelled rectangular table top, before dropping to the floor in each corner to form the legs. Each leg is made from two parallel
lengths of steel. As the legs reach the floor, they join in the centre to form one single length of tubular steel below the table top. Designed by Wolfgang Hoffmann for Howell. W.147.5cm (581n). SDR 1
EXTENSION DINING TABLE
This extension dining table was made in America. The simple, straightforward design consists of a plain, rectangular wooden top with two pullout leaves. The leaves, which are concealed
underneath the table top, increase the table’s
width by 45cm (18m) on each side when extended. The top rests on a trestle base that ends in tubular-steel stretchers and bracket feet. Designed by Gilbert Rohde. Closed: W.152.5cm (60n7). SDR 2
SUNSHADE TABLE
This two-tiered end table is one of a pair. Each black laminate table top has a chrome trim. The smaller, top table sits flush with the tubular-steel frame, and the larger, bottom table is supported by the table base and legs. Designed by Gilbert Rohde for Troy. W.45.5cm (17Yin). SDR I
PALADAO DINING TABLE
This flip-top, wooden dining table has a simple rectangular top with rounded corners. It has two additional leaves for extending the table size and a fifth leg for extra support. The legs taper sharply as they reach the floor. Designed by Gilbert Rohde for Herman Miller. H:91.5cm (3617). SDR 1
TABLES 447
MODEL 91 TABLE
The rectangular top of this table is made from unlimed oak and has a black-linoleum surface. The corners have been slightly rounded. The table top rests on four rigid, chrome-plated tubular-steel legs. Designed by Marcel Breuer for Embru. c.1933. W.120cln (48io). DOR 4
SIDE TABLES
These side tables are made from chrome-plated tubular steel, where the table’s stand is placed to one side can be adjusted to raise or lower the height of the circular glass table lop to still a range of purposes. Designed by Eileen Gray. c. /9`/. 1) !z/( m (20in). DOR I
CAFE TABLE
The square top of this table has a black-linoleum surface with a riveted, plate-steel surround. It rests on four chrome-plated tubular-steel legs, which bend to meet each other in the centre above an X-shaped, tubular-steel base. The linoleum top is new. Produced by Thonet Mundus. (-.1930. H:75cm (291m). DOR 3
GAMES TABLE
The square, orange-laminate table top rests on a chrome-plated brass base. The base hinges in the centre, making the table collapsible. At each corner is a swivel plate for holding a glass. Designed by Boris Lacroix. c.1930. H:70cm (271in). DOR 3
BEECH SIDE TABLE
Designed and manufactured in Sweden, this small side, or occasional table has a circular, white laminate top above three bent-beech legs. The legs taper slightly as they reach the floor. Designed by Bruno Mathsson. 1936. D:44.5cm (17Yin). SDR 3
ROSEWOOD TROLLEY
The circular, rosewood top of this trolley table has hinged sides and rests on a chromium tripod base. The front wheels are also made from rosewood. The caster at the rear of the table is used to stabilize the trolley. H:56.5cm (221in); D:80ca) (311in). L&T
BAUHAUS SOFA TABLE
The table’s frame consists of a rectilinear, nickel-plated tubular-steel base, with a rectangle of tubular steel suspended below the circular, plate-glass table top. Designed by Marcel Breuer in 1929 and produced by Thonet. This example is a Tecta re-issue from 2004. H:60cn7 (231,in): D:80cro (311in).

Dressing Tables, Mirrors and Washstands
Restoration appearance of the dressing table—lowboys and kneehole dressing tables—tables with fitted interiors—Vauxhall glass and Restoration wall mirrors—development of table mirrors with desk bases-18th-century wall mirrors—the mirror with candle sockets and arms—lightly made washstands of the 18th century.
Small side tables were used as dressing tables prior to the Restoration but were not constructed specifically for this purpose. Even during the latter half of the 17th century small occasional tables with a shallow drawer under the top were used in bedrooms and dressing rooms for holding toilet preparations and hand mirrors. Standing table mirrors had not yet been introduced and rectangular wall mirrors with wide convex frames were hung upon the wall above the tables used for dressing.
It was not until the reign of William and Mary that
dressing tables, which were designed for the purpose,
appeared on the scene. This type of table is sometimes
referred to as a writing table and in America is known as a
lowboy. It was constructed with two small drawers above a
single, long drawer and usually stood on four cabriole
legs. Like most of the furniture of the period it was made
in veneered, burr walnut. Some versions had a single,
shallow drawer situated under the table top with deeper
and narrower drawers at either side. Another class of
dressing table which was made about the same time was
the knee-hole pattern. This consisted of two nests of small
drawers on either side of a recessed cupboard. Any doubt
as to whether this piece of furniture might have been designed as a knee-hole desk may be dispelled wherever a pull-out brushing or dressing slide is found immediately under the top.
During the first quarter of the 18th century a further development occurred when the dressing table top was made to open like a chest lid. On the underside a framed rectangular mirror was fitted and the space immediately beneath was divided by partitions into numerous receptacles and boxes for holding cosmetics, pins and all the paraphernalia of the toilet set. The dressing table with the lift-up top and fitted interior continued to be made during the greater part of the long Georgian period, often without any drawers at all. On the other hand, there was a vogue for small chests of drawers, where the top drawer contained a mirror and fitted interior, which would also serve as dressing tables.
In an earlier chapter, mention was made of certain ingenious designs for small articles of furniture which were intended for some particular purpose and among these may be included the poudreuse. This was a small dressing table in which a central section of the top opened back to reveal a toilet mirror. On either side of this were two circular lids, let into the table top, which gave access to the powder containers beneath. This was for use in a time when both men and women wore elaborately dressed wigs which were always kept profusely powdered.
Before giving a more detailed description of the types of mirror used during the 17th and 18th centuries, a note on the development of mirror glass production in the British Isles during this time might prove helpful. The manufacture of clear plate glass for mirrors, except in rather small sizes, was not possible before the Restoration. The Duke of Buckingham sponsored the opening of a glassworks at Vauxhall in London about 1665, and a process for making larger sheets of glass was developed here. Because of the method of silvering then in use the makers were unable to produce mirrors of more than 4 feet in length. The thickness of the glass was appreciably less than that of later mirrors and one of the most important characteristics of these early examples was the very slight bevel which was ground on the edges. The steeper and sharper bevel belongs to those mirrors produced during the 19th century or later. Vauxhall glass continued to be made until nearly the end of the Georgian period and mirrors were also manufactured at certain other glasshouses, such as the one at Southwark.
As already mentioned, Restoration mirrors were surrounded with wide, convex framing which is sometimes referred to as bolection moulding. The frame was usually veneered with burr walnut, oystershell or flower marquetry. It was not until the later William and Mary period that swing-mirrors mounted on a stand were introduced. These were rectangular in shape with slightly incurving upper corners. They were pivoted on two straight uprights which fitted into a base containing a till of small drawers. A number of these early mirror bases were quite deep and sometimes had the appearance of miniature bureaux.
Later in the 18th century, bases became somewhat more shallow and had flat tops with serpentine or bow fronts which matched the dressing tables or chests of drawers upon which they were designed to stand. The uprights from which the mirror was suspended were also shaped and the mirrors were set in an oval framing or in one of shield or similar form. Towards the end of the century many small standing mirrors were made which had feet but no bases with drawers.
As the 18th century progressed new methods of silvering enabled larger mirrors to be made and these were usually framed in the architectural tradition with a frieze, cornice and pediment above. Those which were made to hang between the long sash windows of the Georgian withdrawing rooms were known as pier glasses. A small side table of similar design was often placed below the mirror or a console table with one elaborate supporting leg in the centre.
Convex mirrors were in favour after the introduction of sideboards in the time of Adam and Hepplewhite. It is said that they were designed to be hung above the sideboard so that the butler, without embarrassing the diners by too obviously overlooking, could watch the progress of the meal reflected in the mirror and could more unobtrusively direct his waiting servants in their duties. These convex mirrors with an ebony bezel and deep cavetto frames, decorated with a series of small gilded balls, date from those years around the late 18th and early 19th centuries.
The overmantel mirror was another pattern which was becoming more popular during the later Georgian period. It was introduced about 1745 at a time when fireplaces were beginning to be made smaller. This type of mirror was very often designed with three glass panels, one larger central mirror being flanked by two smaller ones. They were frequently produced with architectural embellishments in the Adam style and the frieze above the glass carried a conventional design of husks in swags, ribbons and medallions or a low-relief group of classical figures. As the 19th century progressed the overmantel mirror was made in one large sheet of glass which steadily increased in size until it almost filled the entire wall space over the mantelpiece.
Because it was realised that a good reflecting surface would increase the volume of light, many 18th century wall mirrors were equipped with branches and candle sockets. Small mirrors in plain frames with a single candle branch were known as sconces while those in elaborately carved and gilded settings of rococo design were called girandoles after the French originals. Girandoles were usually of asymmetrical shape but were made in pairs to produce a symmetrical or balanced effect.
Personal cleanliness was not the sort of thing that people of the 17th and 18th centuries worried much about. When the Romans occupied these islands 1500 years earlier, the civilised Britons lived in villas which were well equipped with hot baths and other hygienic amenities. These disappeared after the end of the Roman occupation and were not revived until the reign of Queen Victoria was more than half over.
In Chippendale’s time a superficial rinsing of hands and face was all that was considered necessary in the way of daily ablutions. Consequently, mid-Georgian washstands were very lightly made. There were two main types, the first of which was rectangular in shape with a double lid on the top. The water jug and basin were kept in a small cupboard beneath and when required were lifted out and placed in a circular recess in the top, after the lids had been opened.
The second type was even more lightly made and con-
sisted of a rectangular or triangular stand, on the top of
which the ewer and basin were placed permanently, but a
shelf was provided half-way down on which to stand the
jug while the basin was being used. The triangular wash-
stand was designed to fit into a corner and was probably
intended for the smaller bedrooms where space might
be at a premium. These stands are often employed nowa-
days as bedside tables, to take a reading lamp and a book.
Unfortunately, the original top with the basin hole in it is
sometimes replaced. While it is necessary to carry out
some modification if the stand is to be used as a table, it
is always preferable to leave an antique piece of furniture
in its original state. Here the problem may be solved by overlaying a new top on the original one. A third, but much less common type of small wash-basin stand is dealt with in the following chapter.
The introduction of larger jugs and basins made of the new ironstone china in the early 19th century and the growing demand for better washing facilities produced a larger and more strongly made washstand. This was about 3 feet in length with high sides and back to prevent water being splashed around. The top was plain, without a recess for the basin, and there were two drawers underneath with a shelf nearer the floor. These Regency washstands were usually made in mahogany with turned legs. They make very good writing tables as modern bedrooms with running water or an adjacent bathroom render their original purpose obsolete.

THE AGE OF THE DESIGNER
HEPPLEWHITE PERIOD
HEPPLEWHITE began his career as a cabinet maker
at a time when the art of cabinet making was at its ifullest tide kakiemon porcelain . The second half of the eighteenth century is often called the golden age of cabinet making, and by I- `6o, when Hepplewhite settled in business at Cripple-gate, the standard of design and craftsmanship was at its zenit1h walnut tripod tea table . The Chippendale school was still in its prime, and they was a strong group of craftsmen who had ingrained in the — a fine trade tradition, a thing which implies something more than a mere ability to use tools antique card table collectors . It means a sense of appreciation and a certain element of originality, tempered with the convention that belongs to a workshop where everything is done by hand silver tripod table .
George Hepplewhite was one of these practical men english bristol teapots . He was scarcely a designer in the sense that Robert Adam was antique english stoneware identification . He did not sit down at his drawing board and sketch out purely original designs, but his work had characteristic features that can usually be recognised andre’ japaneese porcelain . As a cabinet maker he knew his job perfectly, and, in addition, he had a keen appreciation of fine line which enabled him to give his work a certain individuality in a way that would be beyond a man of no imagination eighteenth century women dressing in front of men in their bedchamber . In this sense he no doubt influenced the trade considerably, but beyond this he simply worked in a certain style which a group of cabinet makers was following angouleme guerhard . His name has come to be attached to that style probably because of his book, The Cabinet Maker and Upholsterer’s Guide, and that was not published until 1788, two years after his death antique wooden pot cupboard .
It is apparent, then, in speaking of Hepplewhite furniture a general style popular from about 1760 until practically the end of the century is implied rather than the work of Hepplewhite himself as an individual dutch antique furniture . A great deal of furniture no doubt was made in the workshop at Cripplegate, but except in a few rare instances it is impossible definitely to identify it antique drop-leaf bread table .
Taken generally, Ilepplewhite furniture was comparatively simple antique blue glass kidney shaped end table . There were a few touches of decoration (usually applied), but even the most ornate specimens had nothing like the elaboration found in the richer Chippendale pieces english porcelain parian . Several new forms of decoration were introduced or revived, for whereas Chippendale work had little other form of decoration besides carving, Hepplewhite furniture had
FIG (chineseexportporcelaincoffeeservice) . 130 tambour commode . SHIELD BACK CHAIR french art deco porcelain jaguar .
1770-1780 spoonback armchair .
One of the finest chairs produced in the 18th century “antique collectors blog” .
For all their lightness these chairs were extremely strong art nouveau jugendstil jugs .
being made in the finest mahogany and of the best work-
manship multipurpose dressing table .
inlay, painting, and gilding in addition to carving glass table antique ceramic legs . The inlay usually took the form of bandings and strings in satinwood, rosewood, ebony, and so on, and was in fact very similar to the inlaid work usually associated with Sheraton glass boudoir lamp deco . Carving was of small classical subject, vases, festoons, draped cloth, and swags of husks, an entire departure from the elaborate scrolling acanthus leafwork of the Chippendale school duke extendable dining table .
It is perhaps in the chair that the Hepplewhite charac-
HOOP BACK
CHAIR antique empire or regency style mahogany bookcase .
1770-1780 english seventeenth century cabinets .
A favourite motif of Hepple-
whitewere the ears of wheat ball and claw tripod table antique . These appear at
the top of the pierced splat
in the back 18th century wardrobe .
11
FIG carved japanese tea table . 132 edgar brandt reproductions snake lamp . OVAL BACK
CHAIR pennsylvania house antique sideboard .
1770-1780-
The French influence is
strongly marked In this
chair world market carved brass charger plate . Except for this
French form the cabriole
leg was never used by
the late 18th century
designers antique silver sphinx .
SIDEBOARD WITH BREAK FRONT DECORATED WITH INLAY pembroke end table .
Late i8th century,
It was not until towards the end of the 18th century that the sideboard with drawer and cupboard accommodation
was made epergne antique for sale . It was evolved from the side table with separate pedestals recipe for “soft paste porcelain” . It is difficult to distinguish between
Hepplewhite and Sheraton pieces as both had a great deal in common italian deco furniture .
The Shield Back Chair
teristic is most marked de coene freres . Probably the most famous type is the shield back, of which an example is given in Fig small sutherland table . 130- A really fine example of a shield back ranks amongst the most beautiful things ever produced, but, like the cabriole leg, first-rate examples are rare antique folding “coaching table” . The truth is that it takes a first-class chair maker of considerable experience to make one properly, the difficulty being that the shaping runs in three directions 16th century english joyned table . There is the shield shape seen from the front, the backward rake, and the concave plan shape antique table turned legs . To incorporate all these to form one harmonious whole is something that calls for a great deal of skill and experience antique inlaid table birds .
As a rule the main back framing had a channelled moulding worked all round it, and the probable reason for this was that it helped to emphasise the shield shape steuben stemware deco . It will be realised that, although the lower part of the shield appears to be in one piece, it is in reality in three dresser with mirrors & teardrop pulls & ogee bracket . The side portions in fact continue down, forming the back legs, and a curved bottom rail is fitted in to complete the shape between them 18th century marquetry . By channelling the wood the shield appears to be in one unbroken piece william iv jupe extending circular . The front legs of these chairs were invariably tapered louis sue .
The chief outside influences of Hepplewhite were the Adam and the French raoul dufy, plates ceramique . Of the latter there was Louis XV, which showed itself in the cabriole leg exemplified in Fig classical work/sewing table mahogany,3 drawers,carved legs, pedestal paw feet . 132 olive green and iron red oriental porcelain . Note the French scrolled foot and the flat shaping which continues along the front seat rail in an unbroken sweep arabisque furniture in ny . Another French influence came from the Louis XVI, and one result was the use of the turned leg 18th and 19th century silversmithing . An example of this is the settee in Fig antique spoons italy silver ornate . 129 papier mache tray-c19th .
Other typical Hepplewhite chair backs are the hoop back, of which Fig antique drop leaf or gate leg tables, ,ny . 131 is an example, the oval back (Fig antique 5 leg oak drop leaf table . 132), heart shape, and that with the serpentine shaped top rail curving into the uprights mackintosh wooden chairs .
Pieces such as sideboards, writing tables, bureaux, chests of drawers, tallboys, wardrobes, and so on were, as already mentioned, extremely like Sheraton furniture, and are dealt with more fully in Chapter X curved back chair from 1940s . The bedstead in Fig french chamber pot bed tables . 129 is a four-poster, very like one appearing in Hepplewhite’s book, and shows the general restraint in treatment walnut tripod tea table .
Fig clawfoot dresser . 133 is a sideboard belonging to the last few years of the eighteenth century trestle table double column . It has characteristics of the Hepplewhite style, but there are others which belong equally to Sheraton, and, as we are dealing with what might be termed schools of design rather than the work of individuals, it is apparent that one can do little more than term it late eighteenth century antique french empire . It is probably the work of a cabinet maker whose name has not come down to posterity, and who worked in the traditional style of the period edwards & roberts furniture .
THE AGE OF THE DESIGNER
ADAM PERIOD
N one important sense Robert Adam was entirely
different from the other outstanding characters with
-whose work this book deals serpentine top breakfast table . He was an architect by profession, not a practical cabinet maker, and in turning his attention to furniture he was not in any way fettered by any convention which a tradesman might have 19century british armschairs . It is not suggested that the convention of a good trade tradition is bad ; it is one of the healthiest influences a craft can have ; but it simply is a statement of fact that Adam was able to approach the subject from a fresh angle italian inlaid tea table . He worked from his drawing board and passed on his designs to be carried out by a practical cabinet maker porcelain spanish dancers .
He had travelled a good deal in France and Italy, and on his return in 1758 he set himself up as an architect and rapidly became very successful antique furniture prohibition bar examples . As a result of his foreign studies he was influenced considerably by the classical school, but he had a strong individual turn, and as a result his work had a characteristic touch which made it different from that of other architects working in the classical style antique drop leaf table for sale . It was delicate and refined (some term it effeminate), abounding in small intricate detail, and it superseded largely the rather heavier work of such architects as Sir William Chambers “empire designer, best known for pedestal tables with curved legs .
His connection with furniture was that in designing an interior he included the furniture as an essential part of the scheme blue china tea set with silver inlay england . To the average architect the work was finished when the walls and ceiling had been decorated, but Adam required every detail, even to the ornaments on the sideboard, to harmonise with his ideas japanese portable cherry wood tea tables . Perhaps the most notable example is that of Harewood House, in which the furniture was designed by Adam and executed by Chippendale antique ball and claw desk .
Although there were marked characteristics in Adam furniture, one has to be wary in accepting a piece as genuine Adam Characteristics
Adam chinese furnture form mid 19th centuary . The fact that he had to employ practical cabinet makers, combined with his great success, soon led to a great deal of imitation simple european furniture . In fact, of all the ” Adam ” work that has survived only a very small part can be identified as owing its origin to Adam himself regency period casters .
FIG porcelaine antique motif ming . 137 louis the 14th chair . DINING TABLE WITH FLAP AND PIVOTED BACK LEG japanese laqure tea table .
Abotd 1775•
This is one of a pair of tables Intended to be placed together when used
for dining silver flatware wood handle . The front rail is in reality a drawer front brass ornaments for furniture empire style . It now stands In
the Victoria and Albert Museum South Kensington 1828 sideboard buffet .
self was an individual and original designer, ” Adam ” furniture was, for the most part, the work of a school working in his style antique wood drop leaf table .
Adam used many methods of decoration in his furniture antique oak dropleaf gateleg table . The carving had definite characteristics shearers cupboard heavy . The acanthus leafage was finer and more delicately treated than in the full scrolled form which Chippendale had favoured, and, in addition, he used chains of husks, the honeysuckle device, Greek key, vases, drapery, plaques carved with mythological subjects, rams’ heads, and grotesques antique empire furniture . Inlay and marquetry, too, were revived, and were carried out in satinwood, tulip-wood, rosewood, amboyna, harewood, and so on biedermeier antique de . The subjects were similar to those of the carving furniture designersgerman . Another form of decoration was painting in the style of Angelica Kauffman meissen porcelain antic . A popular treatment was to make these painted panels the main feature of a design of scrolling acanthus leafwork
FIG antique dishes germany pastels with scallops . 138 henry clay bed and furniture . SEMI-CIRCULAR ADAM SIDE TABLE ferniture leg in itali .
T770-1780 antique table in europe .
An extremely fine piece of cabinet work carried out In mahogany antique vase markings newcastle.. on. tyne 1762 . The
curved top rail is veneered, the grain running crosswise 17 century elm gateleg table . The centre
panel and the oval pater2e are typical features brass frame girandole images .
and husks 17th and 18th century french silver marks . In some few instances, too, Wedgwood plaques were introduced bidet square .
A typical Adam sideboard is shown in Fig lion antique mahogany dining table . 136 royal sheffield silver . Properly speaking, it is a side table with two pedestals, but the three pieces were intended to stand together and form a whole In some cases the pedestals were actually joined to the table, though the result never seems quite so successful furniture of meiji period . It gives one the impression that the three pieces were actually separate at one time and were fixed together antique silver candelabras made in england . It is true that there was a general tendency to make the sideboard a single unit, but it was only when the pedestals lost their indivi-The Adam Sideboard
duality as such that the result was really a success labels under boulle furniture . The Sheraton sideboard in Fig makers of antique tea tables . 14 wheat shaped dining table base .4 exemplifies the point furniture  finmar ltd . The origin of the pedestals can just be traced, but they are essentially a part of the design as a whole “art, nouveau”"chiparus”"deer” .
The pedestals owed their origin to the lack of accommodation in the side table andres rosewood solid wood . If one refers back to the side table of Chippendale’s time in Fig chromed trestle table leg . 11 5 it is obvious that its only use was to provide standing space on its top directoire phyfe sofa . There were no drawers or cupboards in which table furniture could be kept opalescent glass perfume france . It fell to Adam to introduce the pedestals antique walnut telescooic dining table . Sometimes they were fitted up with metal grids to enable hot irons to be placed in the cupboards, so providing ? means of warming plates The urns at the top either had metal containers in which iced water was kept, or they were fitted up to hold cutlery antique rosewood armoire with claw feet . The more ornate specimens were often carved with rams’ heads, drapery, husks, and other devices selling japanese tea tables antique .
Towards the end of the century the cabriole leg practically died right out 18th century chippendale dresser . Adam never used it upholstered wood chairs from 1930s . In most cases he preferred the square tapered leg with small square feet fashion 17th century . They were usually recessed in their tapered portion, a pendant of husks often being carved in the recess near the top old gate leg table ball feet . The leg at C, Fig second hand old oak table in staffordshire . 139, shows this detail antique ladik rug . Another common treatment was to carve a series of flutes along the length, the lower part often being filled in with reeds (see A in Fig french antique occasional tables . 139)•
A particularly fine example of an Adam dining table is given in Fig important american girandole mirror . 137 english hepplewhite dressing table . It is one of a pair napoleon antique campaign chair . In use the two would be placed together, flap to flap, so forming one large table meals in eighteenth century england . The flap is supported by a single leg made to pivot frosted glass vase with smokey streaks . Thus when not required for dining the tables could be placed flat against the wall and become useful side tables antique chinese circular revolving bookcase . The decorative treatment is well worth noting antique porclean handled sheffeld flatware . The tapered legs are fluted on all sides except one, this being carved with a crisscross design set in a recess antique table round drop leaf claw foot . At the top are paterx carved with leafwork theodore haviland 1958 pattern . The fluted top rail with the plain centre part carved with swags of husks is typically Adam english stoneware marks . He invariably introduced this centre panel french meals17th century .
An example of a small side table with turned and carved legs is given in Fig furniture cupboard design,side board,wood . 138 george hepplewhite bottle case . It exemplifies well the delicate treatment of which Adam was so fond meissen porcelain animalsfrederick augustus . Note the use of the centre panel again, this time of quite plain form see a silver sauceboat with a heated base . Other kinds of Adam legs and feet are given in Fig antique glass top tea table bird . 139•

CUPBOARDS AND SIDE TABLES
It is a rather curious reflection that so many years should have passed without men having devised any means of locking things away privately except in a chest. It tells its own story, that they should have preferred to use something which could be used conveniently for travelling. Once they came to establish their homes on a more convenient basis, however, the necessity for cabinets to hold valuable or private papers, and cupboards to store various other items became felt. Thus wall furniture became increasingly common.
The early form of side table is given in Fig. 26, a piece dating from about I Soo or soon after. It is virtually a chest, with the corner posts continued downwards to raise it well up from the floor. This was probably its origin. Not that a man, having a chest, would decide that by lengthening the posts he could evolve a sideboard, but that the method of construction was automatically adopted once the idea of a sideboard was thought about. There was probably a subconscious connection between the two ideas, so that it is likely that there was a direct evolution from one to the other. The side table exemplifies the use of the pierced panel, and another point that will appeal to practical readers is the use of the ” mason’s mitre ” in the moulding surrounding the panel. The use of this is explained more fully on p. 44•
Another kind of furniture of the early Tudor Gothic period was the cupboard pure and simple as shown in Fig. 27. It is of the simplest possible construction, consisting of so many boards pegged together and held by the angle plates and strap hinges. Often such cupboards had panels pierced with Gothic tracery designs such as those given on p. IS. In fact A is taken from an old cupboard of the kind. Their purpose was probably to hold food, as the pierced panels gave ventilation.
Of a similar type, but of infinitely better construction, is the cupboard shown in Fig. 28. In place of the planks is a framing of four posts, joined by rails with grooves around their edges to hold panels. Here the last-named are pierced and carved in the form of Gothic windows.
The Court Cupboard.—The development in Elizabethan times is shown in the Court cupboard in Fig. 29. This is worthy of a few moments’ attention because it contains many typical features of the period. It was a cupboard which became extremely popular, probably because it gave good accommodation and there was excellent scope for decorative treatment. Note first the lower doors with their three-panel arrangement. Apart from strength, this had the advantage of keeping the panel width down, and so saving the necessity of jointing up. The framing is channel-moulded ; that is a shallow groove moulded at the sides is worked along the centre of each member.
Incidentally, whilst on the subject of mouldings, it should be noted that in every case they are worked ” in the solid,” the substance of the framing being moulded. It is mentioned here in particular because it will be seen in the next chapter that the tendency in the following century was to use applied mouldings instead.
Attention has already been drawn to the bulbous turnings and their elaborate carving, Fig. 29, and we may now turn to the upper cupboard portion with its sloping sides. It was probably the desire to make space for the bulbous turnings that prompted the cutting away of the cupboard, and at the same time to provide a useful standing space at each side. It will be found that when, later, turning began to decline, the upper cupboard became rectangular in shape, being just set back a few inches from the line of the lower cupboard. Eventually the turnings disappeared almost entirely, being replaced by single drop turnings—but of this we shall see more in the following chapter. It is mentioned here because it helps to explain the reason for the shape of the upper cupboard. The carving in the frieze is a typical Elizabethan detail which continued into the seventeenth century.
BEDSTEADS
Sleeping arrangements in the early years were of the simplest and most primitive form for everyone except the chief persons in the household. The fifteenth century saw considerable improvements in this respect, though it was not until the next century that beds became at all common. There were two kinds, the panelled head and foot (very like the modern form of wood bed), and the four-poster. The last-named developed into a really amazing structure in the time of Elizabeth. That the rooms were abominably draughty is the probable reason for its popularity. The tester or panelling above the bed was hung all round with curtains, so that the sleeper was literally lying in a little room built within the main bedroom. It must have been close and unhealthy, but presumably people preferred that to draughts.
That great importance was attached to these bedsteads is shown by the frequent reference made to them in old wills, and in view of the amount of work put into them they must have been costly things to produce. That in Fig. 31 contains features found in most old beds. Note that the bed frame itself is separate at the foot from the front posts. This was usual in Elizabethan beds, though towards the end of the century the tendency was to join them up.
Figs. 32, 33, and 34 will prove of particular interest to practical cabinet makers and draughtsmen, though they are well worthy of the attention of all students because the sections of mouldings and carved details are extremely important factors when dating a period piece.

OCCASIONAL TABLES
THE SMALL-SCALE OCCASIONAL table
truly stands out. Many examples were also portable and could be moved around a room to serve a variety of functions, although often they had a specific use. In this case, a table could be brought out when required and then moved back to the walls or out of the room. Because occasional tables might be seen from all sides, they were usually veneered on the back, unlike side tables.
Occasional tables are often associated with leisure or with ladies’ activities. Worktables, for example, were given considerable attention by Sheraton and were largely an invention of this period.
Intended to hold sewing apparatus, worktables often have a silk work bag which slides out from beneath the upper surface. Others have a rising lid
with compartments. Some are even fitted with a rising screen for use in front of the fire. Small and fragile, worktables are often made in exotic wood, either with marquetry or
painted details.
Other types include those for gaming (often with a marquetry chess and backgammon board) and reading stands. These were known from the mid 18th century and had a ratcheted slope, sometimes inset with leather if the table was also to be used for drawing. Small, circular gueridons in France were often used to hold candelabra or perfume burners. Quartette, or nests-of-tables, were also an invention of the period. Elaborate examples with cut-brass decoration and exotic wood were made by George Oakley, and others with ring-turned supports and veneers by Gillows.

SWEDISH SIDE TABLE
This fine-quality, giltwood side table has an inset table top made of white marble, which is set above a giltwood frieze carved with laurel leaves and with recessed panels incorporating black and gold verve 6glomis6 vignettes. There
are additional panels above the legs and at the centre of the frieze. The turned, tapering legs are carved with low-relief laurel above a band of Greek key pattern, and then carved with spiral flutes below. The legs terminate in baluster feet. c.1810.

INLAID STAND
This stand is from the southern states of America and has a rectangular top with rounded corners and a band of double string inlay. It is raised on
inlaid, tapered legs below bird’s-eye maple panels. The single drawer has three interior compartments.
CONSOLE TABLE
Made in Franken, Germany, this console table s veneered in mahogany. It has a rectangular Warble table top above a frieze drawer and stands on square, tapering legs.
SHERATON GAMES TABLE
This mahogany games and worktable has a rectangular top with chamfered corners and a chessboard inlaid in its surface. It stands on square, tapering legs. c.1790.
REGENCY WRITING BOX
This bird’s-eye maple and ebony string writing box has a hinged slope with a leather inset, a drawer, and dummy drawer. The ring-turned, ebonized legs are joined by a C-scroll stretcher. c.1810.
BIEDERMEIER SIDE TABLE
This solid beech and beech-veneered side table has a round frieze with an overhanging circular top. It is raised on three sabre legs, joined lower down by an additional, circular shelf. 1820.

SWEDISH SIDE TABLE
This gilt-metal, mounted, mahogany side table by Karl Johan has a circular top above a frieze. The circular stem ends in a tripartite base with scrolled feet.
OCCASIONAL TABLE
Inlaid with brass, this French Empire mahogany table has a circular top featuring an inset marble and pierced-brass gallery. It has a fluted column support ending on a tripod base. Early 19th century.
SOUTH AFRICAN TEA TABLE
This stinkwood tea table has a rectangular top with rounded corners, a plain frieze, decorative contrasting inlays, and slightly tapering legs. 1790-1810.
ITALIAN BEDSIDE COMMODE
Made of olive wood and tulipwood, this crossbanded, bedside commode has a lift-up lid above a fall front and fitted interior. It has square, tapering legs.
BIEDERMEIER SEWING TABLE
This sewing table from Weimar is veneered in cherry wood with ebony stringing. The overhanging table top has rounded corners. The rounded case has two drawers and sabre legs. c.1830.
FEDERAL WORKSTAND
This figured mahogany workstand has a rectangular-shaped top supported by half-round colonettes and two drawers. It stands on rounded, tapering, ring-turned legs ending in ball feet. c.1820.

PATTERN BOOKS
THE VOGUE FOR SMALL, OCCASIONAL TABLES WAS ENCOURAGED BY VARIOUS PATTERN BOOKS PUBLISHED IN THE LATE 18TH AND EARLY 19TH CENTURIES.
The use of pattern books by furniture makers was well-established by the end of the 18th century, when Thomas Sheraton published The Cabinet-Maker and Upholsterer’s Drawing Book. Hugely significant in disseminating the Neoclassical Regency style in England and America, this book included many designs for occasional tables, from pot cupboards to urn stands. Although this was not particularly new – Chippendale and Ince arid Mayhew had included such objects in their pattern books of the 1750s and 60s – the lightness and variety of Sheratons examples was innovative.
Sheraton’s next book was his Cabinet Dictionary, published 1803, which, possibly influenced by Thomas Hope, included some Egyptian designs. The influence of French furniture is also evident in the inclusion of the small writing desk known as a bonheur-du-jour. Sheraton never completed his final massive volume, The Cabinet-Maker, Upholsterer, and General Artist’s Encyclopaedia, although it was published, incomplete, in 1805. in this late title, contemporary developments in France, notably the post-revolutionary styles, were particularly evident.

ITALIAN TABLE
This Neoclassical inlaid fruitwood table en chiffoniers has a three-quarter gallery, two drawers with chevron banding, and square-section, tapering legs. Early 19th century.
WORKSTAND
This Massachusetts Sheraton mahogany workstand has a rectangular top with cut corners and two compartmented drawers. The ringed pilasters lead into tapering, reeled legs with ringed cuffs.

MID 19TH CENTURY TABLES

AN ABUNDANCE OF table types, each
designed for a specific use, was made in the mid 19th century Many of these were suited to popular pastimes of the period, such as playing cards. The general trend was for smaller, more portable tables in greater numbers.
TABLES FOR EVERY PURPOSE Pier tables, originally used as early as the 16th century, became popular again as householders sought to fill their homes with more furniture than ever before. The card table was another popular addition to many homes; unobtrusive when not in use, when required for playing cards, the top of the table was opened to reveal a baize-lined playing surface. The worktable, designed to store needlework accoutrements or writing utensils, frequently incorporated a hanging bag as was previously the fashion. Despite the introduction of gas and oil lighting,
Scrolling brasswork is inlaid on a red tortoiseshell ground.
the torchere remained a very popular fixture on which to stand candlesticks.
A MIXTURE OF STYLES
Tables of all kinds were produced in a wide range of historical and cultural styles. Tables in the Rococo style were covered with extravagant –C” and “S” scrolls and rested on cabriole legs, whereas fluted, tapering legs were found on Classical- or Renaissance style tables. A softening and rounding of contours was expressed in the West by the use of serpentine shapes and undulating mouldings, but Oriental forms remained steadfastly rectilinear.
French and Italian console tables often had marble tops, a fashion
that was exported to many countries, especially Britain and the United States. Centre and side tables often had tripod legs. Such tables frequently featured foldaway tops so that they could be put away easily when not in use.
Each cabriole leg features a gilt bronze mount at its head.
The serpentine platform base has a red tortoiseshell ground.
Acanthus and scroll mounts Bun feet support the
decorate the base of each leg. shaped undertier.
FRENCH CONSOLE TABLE
This Louis XV-style boullework and ebonized serpentine console table is decorated with gilt-metal mounts, which are similar to the earlier Regence style in appearance. All the surfaces of the table are inlaid with scrolling brasswork
on a red tortoiseshell ground. The table top has a shaped apron and is supported on cabriole legs headed by putti and acanthus leaves. The legs are joined by a shaped undertier, below which are bun feet. The table probably had an elaborate mirror in similar style above it originally. c.1860.
CONSOLE TABLES
This pair of Louis XVI console tables is possibly Italian. Each one is gilded and has a shaped, mottled brown-black a-id white marble top with canted corners and coved sides set above a similarly shaped base. The bowed front of each table is decorated with a frieze hung with leafy
swags on either side of a Classical figural medallion. Each table is supported on Neoclassical-style fluted, tapering legs carved with leaves and drapery. The tables were probably designed to stand in piers – the spaces between two windows – possibly with matching gilded mirrors hung immediately above them.
CHINESE LOW TABLE
This rectangular low table is made of huanghuali wood (rosewood). It has a cleated top, which is positioned above an ornate frieze carved with stylized scroll motifs. The table top is supported on straight legs with angular, scroll-carved terminals. 1880.
CHINESE SIDE TABLE
This beech wood side table originates from the Shuzhou province. It has a rectangular top positioned above three drawers and an apron carved with simple roundels. The table top is raised on square-section legs, with carved bracket supports and terminates in spade feet. The back of the table is left undecorated as the piece is designed to stand against a wall. c.1850.
ENGLISH JARDINIERE
This Victorian amboyna and ebony jardiniere is rectangular in form with rounded ends. The top lifts off to reveal a well for plants. The table top has metal-beaded borders and simulated ivory inlay, with a moulded edge above a frieze set with green jasper type round plaques with Classical figures. The case is supported on fluted, turned, tapering legs with ceramic casters joined by a shaped cross-stretcher centred with a turned finial. 1860.
AMERICAN PIER TABLE
This is one of a pair of Classical, marble-top pier tables. It has a rectangular, ogee-moulded top on a conforming apron above scrolled supports, which are painted with acanthus leaves and ornamented with applied giltwood gadrooning. The
rectangular base has a sloping, gadrooned skirt with a mirror back. It sits on claw feet. Late 19th century.
BRITISH TRIPOD TABLE
The marquetry-decorated circular top of this tripod table has a carved, moulded edge and is raised on a fluted, turned, and carved stem supported on three acanthus decorated legs with scroll toes and original brass casters.
BRITISH TEAPOY
The moulded-edge, hinged lid of this early Victorian rosewood teapot’ has canted corners over a deep, ogee-moulded frieze, and is raised on a baluster upright, with a spiral-turned knop, on double C-scroll supports with brass casters.
ENGLISH WORKTABLE
This Sheraton-revival, painted satinwood worktable has an oval, hinged top decorated with putti, flowers, ribbons, and bows above a drawer on turned, tapering legs, which are joined by a cross-stretcher. 1900.
GERMAN TRIPOD TABLE
This carved walnut and inlaid tripod table is from the Black Forest. The shaped oval top is inlaid with oval panels of stags and is raised on a turned column support, ending in three foliate carved cabriole legs. c.1860.
ITALIAN TORCHERE
This elegant, carved, walnut torch&e stand is one of a pair crafted in Renaissance-revival style. It has a shaped square top resting on a columnar carved support in the shape of a winged caryatid. The torch6re is raised on a carved, scrolling tripod base. 1880. S1 3
This is one of a pair of Venetian torcheres, which were painted some years after they were originally made. The scrolling support of this one incorporates a male Blackamoor torso and is raised on a white overpainted and gilt tripod base.
MONGOLIAN TABLE
This low, Asian-style table is made from wood decorated with polychrome. It has a brightly decorated rectangular top above a moulded and carved apron and two carved end flaps. The table top is supported on four
circular-section legs, which are joined by a straight central stretcher. The table is decorated with a broad geometric border and 18th-century designs. Originally, this piece would probably have been used as a dining or occasional table. Mid 19th century.

Mid 19th Century Italian Furniture

Despite a nationalistic fervour that eventually resulted in the creation of the modern Italian state in 1861, furniture production in mid-19th century holy was a fragmented affair, concentrated around the cities of Rome, Milan, Venice, and Florence, in the north. The poorer states and kingdoms of the south of Italy, with the exception of Naples seemed
content to continue using simpler, vernacular forms of furniture.
PERSISTENT FRENCH INFLUENCE Until the Risorgimento movement gathered pace, climaxing in the revolutions of 1848, Italy lived in the Cultural shadow of France, her more powerful neighbour to the north. The
prominence of the Rococo and Empire styles in Italy is a direct consequence of this relationship and, despite a wave of anti-French feeling following
Napoleonic occupation during the early 19th century, this influence persisted. The growing importance of Piedmont as the cultural and political apex
around which the emerging Italian state revolved, only served to protract this lingering Francophilia. The
Rococo- revival style was,
therefore, one of the most prominent in mid-19th-century Italy. Fussy forms, such as the canape en cabriolet, a padded sofa, were richly carved and enveloped in gilt. Side tables with pierced and scrolled detail were covered with marble tops in a typically Italian twist. The grotto or fantasy style, originating in medieval France, was one that Italian craftsmen had adopted with relish. Meticulously detailed representations of timber and shell forms characterized this look, which was particularly indebted to the work of French designer Bernard Palissy (1509-90). Although examples of- fantasy furniture from the mid-19th century are generally considered interior to earlier pieces, it was nevertheless a popular revival style.
ITALIAN TRADITIONS
The Renaissance revival was more representative of Italian history, and
the quality of furniture made in this style by Italian craftsmen demonstrates the high esteem in which it was held. The Florentine cabinet-maker Andrea Baccetti and the Sienese wood-carver Angelo Barbetti both produced
particularly fine pieces in the Renaissance style. Archaic forms, Stich as the settle and architectural wall mirrors, were made in walnut, with deep carving depicting Classical and grotesque forms.
Blackamoors, an 18th-century Venetian invention, remained popular well into the 19th century, either as bases for torcheres or as decorative objets in their own right. Venetian glass-makers continued to produce mirrors of the highest quality Particularly fine examples of mirrors with intricately etched glass frames
speak of the greatness of the glass-masters of Murano. Elaborate decorative techniques, such as micromosaic, provided a forum for the most accomplished artisans to demonstrate their proficiency.
In the later 19th century, the regional Italian furniture industry began to flourish, and regions such as Brianza and Pesaro, which are
famous today for their line
work, started to develop the
infrastructures and traditions
that would ensure their
future success.
Round table Designed by Michaelangelo Barberi, the micromosaic table top features a medallion design on a red, square-shaped cartouche and a black marble ground. In the centre is a view of St Peter’s Square, which is surrounded by ovals, representing
the four epochs of Rome. The ebony base has ornate ormolu mounts. c.1850. Dorn:102cm (40%in). DN
Four epochs of Rome
Micromosaic was developed within the Vatican in the 17th century as an alternative means of decorating altars with devotional tableaux. The paintings in the vast basilica of St Peter’s had been damaged by damp, and the enamel tesserae used in micromosaic overcame this problem. They became known in Rome as la vera pillura per eternita, meaning “eternal paintings”.
The technique is an evolution of the ancient architectural mosaics developed in the Greco-Roman period. An image is built up using tiny components, or tesserae, of different-coloured enamel or glass. Each tessera is a thread about 3mm ong with a diameter slightly wider than a hair. The thread is pushed into the putty of the mosaic base, leaving the end visible. The attention to detail and level of expertise
involved in then creation are remarkable –the finest examples include 775 tesserae per cm2 (5,000 per in’).
European gentlemen on the Grand Tour would purchase trinkets, such as boxes and jewellery decorated with micromosaic as mementoes of their time in Rome. The
wealthiest tourists brought home table tops made by craftsmen operating in work-shops in the Vatican. Typically, these table tops depicted scenes from antiquity or famous Roman vistas. They were highly prized throughout Western Europe as Fine-art objects. Other tables might have plain marble tops with panels of micromosaic incorporated within them.
There is a collection of micromosaic artefacts in the Gilbert Collection Museum in London and another in the Hermitage Museum in St Petersburg, Russia.

Dining silver
Plates, salvers, tureens, and other items of dining silver first appeared in the late 17th century, when the complete dinner service, NN ith matching dishes and cutlery, was introduced at the French court. From that period, and especially in the 18th century, elaborate dining silver in the latest fashions was often used to display the wealth and status of the host, and finely engraved coats of arms or crests, identifying the owner, are common features of items such as salvers. For collectors today, heavy and elaborately decorated items including tureens and centrepieces are generally more rare and expensive than flatware, utilitarian drinking vessels such as tankards, and casters, cruets, mustard-pots, and salt-cellars, all available in a great variety of styles.
Plates and salvers
Dinner services, comprising individual plates and cutlery as well as serving dishes for specific courses and foods, were first introduced at the French court in the late 17th -century. Initially they were the preserve of royalty and the aristocracy, but the fashion for complete services spread in the early 18th century to the minor nobility and gentry, who often acquired different parts of the service over a period of time as their finances allowed. Silver plates, of various sizes, were generally made in sets of 12 (and are normally sold as such today). On both plates and salvers, the main decorative feature is usually the engraved coat of arms or crest of the owner, and sometimes the engraving is of very high quality.
PLATES
The earliest plates found on the market today tend to date from the early 18th century, when the first complete dinner services were made. These plates are seldom larger than 25cm (10in) in diameter and are starkly plain, except for a crest or coat of arms engraved on the broad, flat rim. Marks on these plates are generally found on the underside of the rim and should be clearly visible.
Missing or distorted marks usually indicate that the
plate has been altered; new borders may have been added and the rim reshaped to accommodate them.
More common than early 18th-century
plates are those dating from the 1740s
onward. During this time the fashion
for complete dinner services, unified by
matching ornament, reached its peak
and the custom of dining on a grand scale
necessitated services of up to 200 pieces. The standard service included six dozen meat plates, generally 25cm (10in) in
diameter (first-course and dessert plates were slightly smaller), and two dozen soup plates. Larger oval dishes for serving roasts were also made en suite.
Eighteenth- and nineteenth-century plates vary little in design except for the borders. During the 1730s the broad, plain, flat rim was replaced by a narrower, wavy rim (giving the plate a five-sided appearance) with gadrooning. With the development of the Rococo style in the 1740s, shell and gadrooned borders became most common; some of the finest plates have separately cast and applied borders, which should be marked. Simpler patterns of reed-and-tie or beading became fashionable in the 1770s and 1780s. The more elaborate gadroon, shell, and foliage border is characteristic of the Regency period. After about 1840 porcelain services were more popular than silver, and most silver plates made were replacements for or additions to earlier services.
17TH- TO EARLY 18TH-CENTURY SALVERS
Dating from the mid-17th century, the earliest salvers were of thin-gauge metal with a raised central foot, and were made as stands for porringers or candle cups. The finest examples were gilded and richly chased and embossed around the border with acanthus leaves, fruit, and flowers in the Dutch Baroque style. From (.1680 to (.1720 heavier-gauge metal was used, and the central foot, sometimes detachable, was often strengthened with applied cut-card work. In the 1720s the central foot was replaced by three or four small cast (usually bracket) feet, eet, especially on the rarer square, octagonal, or octafoi I -sh aped salvers popular during this period. Salvers before c.1740 often had moulded and applied rims of convex and concave curves.
LATER 18TH- AND 19TH-CENTURY SALVERS
Like plates, salvers from (.1740 onward are generally circular or five- or six-sided in shape, with only the borders and engraved armorials changing in style. On salvers, however, the armorials usually appear in
the centre rather than on the rim. The style of engraving should be contemporary with that of the border and correspond to the date of the marks. In the Baroque period, designs of arms and cartouches were relatively symmetrical, with strapwork and interlacing scrolls; the finest designs on English pieces were by Huguenot engravers such as the Gribelin fatuity.
In the mid-18th century, delicate, asymmetrical designs of flowers, shells, and scrolls reflected Rococo fashions. Salvers were particularly in demand for carrying tea and coffee services. Smaller versions, known as “waiters” (generally less than 20cm/8in in diameter),
ENGRAVING
Engraved designs were traditionally cut into the metal surface by hand with a sharp steel tool known as a “burin” or “graver”; today, most engraving is done
by machine. The technique was particularly popular for reproducing coats of arms, ciphers, and crests. Some of the finest engraving was done in early 18th-century England by such specialists as William Hogarth (1697-1764) and Simon Gribelin (1661-1733). The style of engraving can help to date a piece, but it is not always a reliable method as arms were often re-engraved with a change of ownership.
were also made, and sets of two or more salvers became common. The largest, measuring up to 38cm (15in would usually be engraved with a coat of arms; smaller ones (15-20cm/6-8in) had only a crest. Elaborate Rococo borders appeared, sometimes cast separately, featuring forward and reverse scrolls interspersed with shells, and feet took the form of scrolls or shells. The finest salvers were also flat-chased around the outer edge with designs of scrolls, shells, and foliage.
In the Neo-classical period more restrained borders of gadrooning, reeding, and beading, together with bright-cut engraving of ribbons, husks, and swags, were introduced. However, the taste for more ornate plate in the Regency period led to the appearance of large and heavy, often silver-gilt, salvers with paw feet and richly cast borders of shells, vine leaves, and gadrooning. Throughout the 19th century salvers in 18th-century styles were popular; some earlier salvers were also redecorated with chasing, but the 19th-century style is more elaborate and covers more of the flat surface than on 18th-century examples.

Library and writing tables.
The earliest-known tables specifically designed for writing date from 16th-century Italy, when cabinetmakers produced elaborately carved walnut tables with sloping desks fitted into the tops and small drawers below for the storage of writing materials. Similar tables, or bureaux, probably originated in France during the third quarter of the 16th century.
THE 18TH CENTURY
Tables designed specifically for writing were introduced in England after the Restoration (1660). French tables influenced English designs during this period, and both French and English examples were usually made of oak or walnut with a rectangular folding top. The flap was supported by baluster or tapered pillar legs they are often decorated with “seaweed” or floral marquetry and closely parallel the Dutch models. During the early 18th century the Louis XIV concept of a free-standing bureau plat (a flat-topped writing table) invented by Andre-Charles Boulle (1642-1732) was taken up and adapted by English cabinet-makers. Intended to occupy a central position in the library, and to act as a statement of the wealth and power of its owner, such desks reached the zenith of their popularity in England during the mid-18th century, and by the third edition of The Gentleman and Cabinet-Maker’s Director (1762) by Thomas Chippendale (1718-79), no less than 11 types of carved open pedestal desk were illustrated.
As postal systems developed, and as paper became cheaper and standards of education improved, so the need arose for less stately versions of the writing table, particularly for use by women. Some of these tables appeared in Chippendale’s Director; while others featured in The Universal System of Household Furniture (1762) by John Mayhew (1736-1811) and William Ince (c.1738-1804). A great range of new forms came into use at this time, which were notably lighter than their predecessors. Neo-classical tables were made in exotic hardwoods such as satinwood, an expensive and very fashionable wood that was particularly suited to this lighter style of table, and many examples were adorned with fine marquetry.
THE 19TH CENTURY
Several new types of writing table developed during the Regency period (c.1790-1830), including the Carlton House desk, named after the London home of the Prince of Wales (later George IV). Another fashionable form featured curved X-shaped supports at either end, with drawers in the frieze, and the flat top enclosed by a three-quarter brass gallery. At the end of the Napoleonic Wars in 1815, furniture designers were given the opportunity to create a wide range of new forms, when the technology required to marry wood
to metal – developed for military purposes – was applied to furniture. The furniture of the Regency period was therefore characterized by elegant design combined with ambitious construction techniques. New features included galleries at the top of the table, used either for decorative effect or to hold books safely; numerous small drawers, hinged flaps, and curved ramps, which could be pulled out as required, extending the available surface and facilitating activities such as drawing and painting; and screens that extended beyond the main structure in order to shield the writer’s face from the heat of the fire. In addition, revolving circular or polygonal “drum”tables were invented for the library, where they were used for storing and displaying books and paper.
• “BUHL” WORK examples tend to be inferior to those of the 17th and early 18th centuries: the gilding is generally brassier and the tops are inlaid, in contrast to the leather-lined tops of the 17th-century prototypes; the drawer-linings of original examples were usually in oak, while on the copies they are in walnut.
• ALTERATIONS leather tops can get ripped and have often been replaced – this should not affect value; heavy legs have often been replaced with lighter legs of an earlier style to make the table more commercial.

Games and work tables.
Small tables for recreational use, such as those for cards, games, and needlework, developed in tandem in Britain and France, each country’s designs influencing the other’s at different stages and providing a richness that has been imitated the world over. The earliest tables designed specifically for cards were introduced at the end of the 17th century. In the 18th century card-playing and gambling were immensely popular, and furniture-makers catered to an ever-eager market.
EARLY GAMES TABLES
Tables made c.1700 were often veneered with walnut, with circular folding tops and tapered baluster legs, one or two of which swung out to support the flap, held together by shaped stretchers. The French influence is apparent from about this time. Some of the new card tables were decorated in marquetry, and designed with the finely carved tripod bases that were then popular in France. But where the French made use of tortoiseshell and brass, the British typically employed a variety of indigenous woods including walnut.
Design and construction developed rapidly in Britain in the early 18th century as card-playing became a mania. The fabric, which had traditionally been placed over the Surface of the table, now became a fully integrated part of the design, and was commonly made of baize. Simple cabriole legs and pad feet were gradually overtaken by designs of increasing boldness, such as club feet, in turn succeeded by claw-and-ball and lion’s-paw.
From c.1730 mahogany became the most common timber used. The construction also developed: the flap supported by a swing leg, which was prevalent c.1700, ran concurrently with aconcertina action on the best-quality tables from c.1720. This was introduced to ensure greater symmetry and stability. Some of the more ingenious tables were designed to incorporate separate leaves for backgammon, chess, writing, and cards; such tables often have unusually deep friezes in order to hide the clumsy arrangement of leaves.
LATER GAMES TABLES
During the mid-18th century British tables became more elaborate. Shaped friezes, lion-masks, feathering, acanthus scrolls, naturalistic mouldings, and scrolled feet all made their appearances in turn. Many of the tables were made in softwood and japanned. Tripod tables with triangular tops, for tredrille and other three-handed games, were also made at this time.
In France, tables were made for specific games: square for quadrille, round for brelan, triangular for tri, and marquetry tops for chess. From c.1730 to 1735 the Louis XV style evolved, signalling the triumph of graceful, sinuous lines. Furniture-makers gained complete mastery of their techniques, and design developed rapidly. Free-standing games tables were ideal vehicles for their skill, and were given cabriole legs with double bends, making elongated S-shapes, usually terminating in scrolls or volutes resting on small wooden cubes. Nearly all French games tables were decorated with marquetry in coloured woods; Parisian furniture-makers tended to use chiefly imported woods, while provincial makers used regional olive, cherry, pear, and chestnut. Mahogany was unusual in France, and was mainly confined to the Bordeaux region because it entered the port on ships from the West Indies. Its use ceased completely when the British blockaded the French ports in 1806.
By 1770 Britain’s enthusiasm for gambling and games had aroused such fervour that George III and Queen Charlotte forbade it at the royal palaces – with little effect. The design and metamorphosis of games tables continued apace. In the last quarter of the century,work tables were often combined with games tables.
Sheraton designed a number of work tables, including some with reversible tops, and increasingly they were constructed with folding demi-lune tops, so that they could be stored out of the way like a side table when not in use. Many games and combination games and work tables were now made using fabric (usually lute string or satin) pouches, or bags, suspended beneath the table for the storage of needlework. On many examples found today these have either been removed completely or are in a tattered state. The pouch design was readily taken up by other designers, who also fitted pouches onto small satinwood Pembroke tables and portable tables with curved wooden handles and small drawers.
Tables were made in a wide variety of shapes, such as oval, circular, square, broken-fronted, or serpentine, with tapered quadrilateral or cylindrical legs, in mahogany or satinwood, and were generally covered with green baize. The dishings for candles or counters were now omitted, and the flaps, when open, were constructed in any one of the earlier styles. In The Cabinet-Maker and Upholsterer’s Guide (1788-94), George Hepplewhite (d.1786) wrote: “The fronts of these tables may be enriched with inlaid or painted ornaments; the tops also admit of great elegance in the same stiles”, and he gave four such designs for inlaid or painted surfaces. Marquetry decoration is rare in this period, although in 1781 George, Prince of Wales (later George IV), ordered two circular mahogany card tables inlaid with differently coloured woods.
When George III and Queen Charlotte failed to suppress gambling, Parliament intervened with better results. Thus card and games tables became less fashionable during the Regency period, and so fewer were made. In his pattern-book The Cabinet-Maker and Upholsterer’s Drawing Book (1791-1802), Thomas Sheraton (1751-1806) even went so far as to
remark that such tables were “oftener used than to good purpose”.
WORK TABLES
Introduced during the second half of the 18th century, work tables were small tables used for holding needlework accessories. They were originally fitted with either lifting tops or many small drawers, and the accoutrements of needlework, such as reels, needles, shuttles, and bobbins, could be safely stored under the worksurface.
19TH-CENTURY WORK TABLES
By the mid-19th century designs had become increasingly convoluted, with the streamlined Regency elegance replaced by the heavier Victorian designs. The Victorians’ penchant for resurrecting and “improving” styles of earlier periods gave rise to a number of different types of games and work tables in an eclectic combination of styles. All the basic forms of earlier periods continued to for different games,D-end sections for holding counters and games pieces, and work pouches underneath where appropriate. The most popular woods were walnut and mahogany, and among the many different types of decoration used were exuberant carving in the Rococo Revival style, or inlaid brasswork on an ebony or hardwood ground in the style of Andre-Charles Boulle ( 1642-1732).

• British tables are mainly in walnut, mahogany, rosewood, and satinwood, while provincial examples are in oak; in France, Parisian makers used imported woods while provincial makers used regional woods such as olivewood, cherry, pear, and chestnut.
• COLLECTING both card and work tables are generally quite decorative and can be relatively inexpensive; both types can be used as side tables; good-quality British holdover card tables ( 1720-70) have a concertina-action underframe, which will carry a premium; sometimes this underframe will have been replaced with a gateleg support – this should be evident by checking underneath where signs of wear should be visible; copies of the concertina-action games table were made in the 1920s and 1930x, but most were not intended to deceive; baize lining on card tables is nearly always replaced – this will not affect value; original pouches on work tables are rarely found.